Error while configuring OBIEE 11G OPMN Service during Installtion

Hello,
i tried installing 11G with simple install on Vista and didnot work, I think 11g does not work on Any Vista and not sure of W7
second, i tried installing the same on Windows XP and the installtion worked fine till the end and while configuring OPMN Services,
the OBIPS Services and OBICCS services failed, i retried to configure this services with "retry" option but never worked, so i skipped this part thinking that
i can configure this manually. finally i was not able
weblogic's Admin server, Managed server, Node manager and Analytics.war deployments are all healthy in EM Console and Weblogic console
the Fusion Middleware control in EM Console shows the BI Components are not started and i tried restarting it and but never started.
so i think there is something wrong with OPMN configuration at the end of installtion
is there a way to trouble shoot this.
i tried searching of SAWSERVER service so i can start the manaully, but it did not start
i did a softwareonly install on top this single instance installtion thinking if that can help me, but it didnt
so please anyone help me
Thanks
Kumar

Hi Kumar,
I believe OBICCS is the Oracle BI Cluster Controller Service. That particular service requires a static IP address. A lot of people use the loopback adaptor to accomplish.
Here's a quick rundown of some things you should check before installing OBIEE 11g.
1. Make sure you have a static IP (use a loopback adaptor if you have to).
2. Make sure your static IP adaptor is the first adaptor in your connections list. You can do this by going to Control Panel -> Network and Internet -> Network Connections -> Advanced. Use the up and down arrows to ensure that the static IP is the top of the list.
3. Make sure you hosts file (c:\Windows\system32\drivers\etc\hosts) has the proper entry for the static IP address. For example, if your computer is called MyComputer and your static IP is 192.168.0.1, then the first entry should be: 192.168.0.1 MyComputer. Note: You may need to have your domain on your entry. ie. 192.168.0.1 MyComputer.mydomain.com.
I recommend you check those things. If you missed one of them, fix it and then back out the 11g install and re-install.
Good luck and if you found this helpful, please award points!
-Joe

Similar Messages

Error while configuring Oracle 11g Forms/Reports Product during istallation

Dears,
We are trying to configuring Oracle 11g Forms / Reports during istallation.
OS using: Win 7 -- 32 bit
RAM: 4 GB
We have installed the following modules successfully.
Following are the steps which we have followed:
1. Installation of Oracle jdk's --> Successful
2. Installation of Oracle web Logic Product --> Successful
3. Installation of Oracle Forms & reports Products ---> Successful
4. Configuration of Oracle 11g Forms / Reports Products --> Failed
After performing step 4, we are getting an error in the .out file
Can anyone please let us know what we have to do for making the step 4 successful.
Following is the content present in the "install2012-08-30_04-43-55PM.out" file..
Setting ORACLE_HOME to C:\Oracle\Middleware\frs11.1.2
Setting Doracle.config.mode to true
Adding C:\Users\id821839\AppData\Local\Temp\OraInstall2012-08-30_04-43-55PM for deletion.
Adding to classpath:file:/C:/Users/id821839/AppData/Local/Temp/OraInstall2012-08-30_04-43-55PM/ext/jlib/classic.jar
Adding to classpath:file:/C:/Users/id821839/AppData/Local/Temp/OraInstall2012-08-30_04-43-55PM/ext/jlib/template.jar
[email protected]lassicPage.ScreenRes
configFileName:C:\Users\id821839\AppData\Local\Temp\OraInstall2012-08-30_04-43-55PM\ext\jlib\footprint.xml
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
Reading response file..
Parse Warning at line number:15
MYORACLESUPPORT_USERNAME=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Parse Warning at line number:27
PROXY_HOST=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Parse Warning at line number:30
PROXY_PORT=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Parse Warning at line number:33
PROXY_USER=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Parse Warning at line number:39
COLLECTOR_SUPPORTHUB_URL=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Parse Warning at line number:75
DOMAIN_PORT=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Parse Warning at line number:90
STATICPORT INI FILE LOCATION=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Parse Warning at line number:99
PROXY HOST NAME=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Parse Warning at line number:102
PROXY PORT NO=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Parse Warning at line number:105
PROXY BY PASS ADDRESS=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Validations are enabled for this session.
Verifying data......
In processErrorMsgStringOracle Instance
needWritableDirectory: false
needWritableDirectory: true
middlewareHomeLocation:C:\Oracle\Middleware
weblogicHomeLocation:C:\Oracle\Middleware\wlserver_10.3
weblogicHome:C:\Oracle\Middleware\wlserver_10.3
weblogicHomeLocation:C:\Oracle\Middleware\wlserver_10.3
In processErrorMsgStringInstance Name
In processErrorMsgStringunknown
In processErrorMsgStringOracle Home
In processErrorMsgStringDomain Name
In processErrorMsgStringunknown
In processErrorMsgStringAdministrator Password
In processErrorMsgStringunknown
In processErrorMsgStringAdministrator User Name
In processErrorMsgStringunknown
configuration Failed. Exiting configuration due to data validation failure.+
outputFile:C:\Program Files\Oracle\Inventory\logs\installProfile2012-08-30_04-43-55PM.log
in writeProfile method..
+[ENGINE] Adding C:\Users\id821839\AppData\Local\Temp\OraInstall2012-08-30_04-43-55PM for deletion.+
Thanks in advance..
Suhail
Edited by: 956027 on 30-Aug-2012 23:13
Edited by: 956027 on 30-Aug-2012 23:14

Following is the last part of thecontent in .log file
This is the only part wher I have found the term "error"
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidDomainHome] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Fetching the value of domainName+
+[2012-08-31T08:46:03.570+02:00] [as] [TRACE] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidDomainHome] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] [SRC_CLASS: oracle.as.install.common.handlers.weblogicQueries.IsValidDomainHome] [SRC_METHOD: executeHandler] domainName: frsDomain+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidDomainHome] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Fetching the value of wlHome+
+[2012-08-31T08:46:03.570+02:00] [as] [TRACE] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidDomainHome] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] [SRC_CLASS: oracle.as.install.common.handlers.weblogicQueries.IsValidDomainHome] [SRC_METHOD: executeHandler] wlHome: C:\Oracle\Middleware\user_projects\domains+
+[2012-08-31T08:46:03.570+02:00] [as] [TRACE] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidDomainHome] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] [SRC_CLASS: oracle.as.install.common.handlers.weblogicQueries.IsValidDomainHome] [SRC_METHOD: executeHandler] mwHome: C:\Oracle\Middleware+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidDomainHome] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] errID ====>>>>:INST-07277+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidDomainHome] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Error:Error in validating Domain name+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidDomainHome] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Cause:Specified Domain name is either not valid or the domain location already has a domain with the same name.+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidDomainHome] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Action:Enter a valid Domain name+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidDomainHome] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Exiting method executeHandler+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Handler launch end: weblogicQueries.isValidDomainHome+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Handler returned status: FAILED+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Error in validating Domain name+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Setting valueOf(DOMAIN_NAME) to:frsDomain. Value obtained from:USER+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Setting valueOf(DOMAIN_NAME) to:frsDomain. Value obtained from:USER+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Setting valueOf(INVALID_TEXT_CHAR_MSG_STRING) to:unknown. Value obtained from:USER+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Setting valueOf(INVALID_TEXT_CHAR_MSG_STRING) to:unknown. Value obtained from:USER+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Inputs passed to the handler: [ FIELD DOMAIN NAME ( field ) = "Domain Name" ], [ DOMAIN_NAME ( val ) = "frsDomain" ], [ INVALID_TEXT_CHAR_MSG_STRING ( invalidCharMsgString ) = "unknown" ], [ Valid Character List for Farm Name ( regEx ) = "[\p{Alnum}_-]+" ]+
+[2012-08-31T08:46:03.570+02:00] [as] [TRACE] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] [SRC_CLASS: oracle.as.install.engine.modules.handler.engine.HandlerLauncher$LaunchHelper] [SRC_METHOD: launch] Handler class: class oracle.as.install.common.handlers.txtQueries.CheckTxtFieldUsingRegEx+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Handler launch begin: txtQueries.checkTxtFieldUsingRegEX+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Entering method executeHandler+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Fetching the value of isCanBeBlank+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Fetching the value of val+
+[2012-08-31T08:46:03.570+02:00] [as] [TRACE] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] [SRC_CLASS: oracle.as.install.common.handlers.txtQueries.CheckTxtFieldUsingRegEx] [SRC_METHOD: executeHandler] Value to be tested: frsDomain+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Fetching the value of field+
+[2012-08-31T08:46:03.570+02:00] [as] [TRACE] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] [SRC_CLASS: oracle.as.install.common.handlers.txtQueries.CheckTxtFieldUsingRegEx] [SRC_METHOD: executeHandler] Text Field name: Domain Name+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Fetching the value of regEx+
+[2012-08-31T08:46:03.570+02:00] [as] [TRACE] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] [SRC_CLASS: oracle.as.install.common.handlers.txtQueries.CheckTxtFieldUsingRegEx] [SRC_METHOD: executeHandler] Regular Expression: [\p{Alnum}_-]++
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Fetching the value of minlength+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Fetching the value of maxlength+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Fetching the value of invalidCharMsgString+
+[2012-08-31T08:46:03.570+02:00] [as] [TRACE] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] [SRC_CLASS: oracle.as.install.common.handlers.txtQueries.CheckTxtFieldUsingRegEx] [SRC_METHOD: executeHandler] Invalid Char Msg String: unknown+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Checking the value for minimum length+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Checking the value for maximum length+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Checking the value for invalid characters+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Exiting method executeHandler+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Handler launch end: txtQueries.checkTxtFieldUsingRegEX+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Handler returned status: SUCCESS+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Setting valueOf(ADMIN_PASSWORD) to:<SECURE>. Value obtained from:USER+

Error while configuring credential for Adobe service

Hi,
While configuring Credential i am getting an error as popup. But when I click on OK, I am able to see the .pfx file in the top.
Error Details:
An error occurred while updating the credential expiry for alias 'ReaderRights':
com.adobe.service.sap.configuration.ConfigurationException:Unable to load keystore from credential. Please ensure the password is correct.
We have not received any password from SAP, only there was one password to download the file.
After all I am trying print forms, not an interactive form. But when I deploy and run it shows error.
Error Details:
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Error during call to AdobeDocumentServer: Processing exception during a "UsageRights" operation.
Request start time: Sat Nov 26 11:54:53 GMT+05:30 2005
com.adobe.ProcessingError: Credential login error while applying usage rights to PDF: C:\WINNT\Temp\adobewa_J2E_00_1015779131\DM8997397967410486296.dir\DM-8285166541278556430.tmp
Specific error information:
$$$/PDF/PDFCredentialLoginFailure2=error while logging into credential ^0
GeneralError: Operation failed.
SecurityHandler.login:-1:
Could not open Digital ID file with the password provided. Please try again.
Please suggest the solution.
Thanks,
SA.

Hi,
Still I have not got any solution for this. But my bigest problem right now is, I am using print form and there is no interactive feature. There is lot of forum posts where it is specified that, credentials is not required for print forms..... But when I try to deploy the Adobe application I get below error....
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Error during call to AdobeDocumentServer: Processing exception during a "UsageRights" operation.
Request start time: Thu Nov 24 20:00:50 GMT+05:30 2005
com.adobe.ProcessingError: Credential login error while applying usage rights to PDF: C:\WINNT\Temp\adobewa_J2E_00_1015779131\DM400443135109740914.dir\DM-4094495003961307306.tmp
Specific error information:
$$$/PDF/PDFCredentialLoginFailure2=error while logging into credential ^0
GeneralError: Operation failed.
SecurityHandler.login:-1:
Could not open Digital ID file with the password provided. Please try again.
General error information:
IDL:com/adobe/document/pdf/CredentialLoginFailure:1.0
Please suggest....
Thanks.
SA

Creating ASInstance Failed Error while Installing OBIEE 11g 11.1.1.5.0

Hi
I was trying to install OBIEE 11g 11.1.1.5.0 on a Windows Server 2003 32 Bit machine and was getting an error at 16% of Configuration Procress.
Error - Creating ASInstance Failed.
I went to see the logs. Please Help
Log :
[2011-06-09T20:17:15.609+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 25] [ecid: 0000J1op8sl6UOK6yVEgMG1DwCxt00000G,0] Created ASInstance. Calling opmn start command
[2011-06-09T20:17:17.218+05:30] [as] [ERROR] [] [oracle.as.provisioning] [tid: 25] [ecid: 0000J1op8sl6UOK6yVEgMG1DwCxt00000G,0] [[
oracle.as.management.opmn.optic.OpticException: Error in starting opmn server
Operation aborted because of a system call failure or internal error
     at oracle.as.management.opmn.optic.OpmnAdmin.executeCommand(OpmnAdmin.java:310)
     at oracle.as.management.opmn.optic.OpmnAdmin.startOpmnServer(OpmnAdmin.java:87)
     at oracle.as.provisioning.fmwadmin.ASInstanceProv._createInstance(ASInstanceProv.java:254)
     at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstance(ASInstanceProv.java:166)
     at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstanceAndComponents(ASInstanceProv.java:116)
     at oracle.as.provisioning.engine.WorkFlowExecutor._createASInstancesAndComponents(WorkFlowExecutor.java:523)
     at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:439)
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
     at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
     at oracle.as.install.bi.biconfig.standard.InstanceProvisioningTask.doExecute(InstanceProvisioningTask.java:81)
     at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
     at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
     at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:112)
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
     at java.lang.Thread.run(Thread.java:662)
[2011-06-09T20:17:17.218+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 25] [ecid: 0000J1op8sl6UOK6yVEgMG1DwCxt00000G,0] Exit code from OPMNAdmin : 2
[2011-06-09T20:17:17.218+05:30] [as] [ERROR] [] [oracle.as.provisioning] [tid: 25] [ecid: 0000J1op8sl6UOK6yVEgMG1DwCxt00000G,0] [[
oracle.as.provisioning.engine.CfgWorkflowException
     at oracle.as.provisioning.engine.Engine.processEventResponse(Engine.java:596)
     at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstance(ASInstanceProv.java:178)
     at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstanceAndComponents(ASInstanceProv.java:116)
     at oracle.as.provisioning.engine.WorkFlowExecutor._createASInstancesAndComponents(WorkFlowExecutor.java:523)
     at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:439)
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
     at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
     at oracle.as.install.bi.biconfig.standard.InstanceProvisioningTask.doExecute(InstanceProvisioningTask.java:81)
     at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
     at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
     at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:112)
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
     at java.lang.Thread.run(Thread.java:662)
Caused by: oracle.as.provisioning.util.ConfigException:
Error creating ASInstance instance1.
Cause:
An internal operation has failed: Error in starting opmn server
Operation aborted because of a system call failure or internal error
Action:
See logs for more details.
     at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
     at oracle.as.provisioning.fmwadmin.ASInstanceProv._createInstance(ASInstanceProv.java:317)
     at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstance(ASInstanceProv.java:166)
     ... 18 more
Caused by: oracle.as.management.opmn.optic.OpticException: Error in starting opmn server
Operation aborted because of a system call failure or internal error
     at oracle.as.management.opmn.optic.OpmnAdmin.executeCommand(OpmnAdmin.java:310)
     at oracle.as.management.opmn.optic.OpmnAdmin.startOpmnServer(OpmnAdmin.java:87)
     at oracle.as.provisioning.fmwadmin.ASInstanceProv._createInstance(ASInstanceProv.java:254)
     ... 19 more

Hi,
The etc/hosts file needs to be changed from 127.0.0.1 host to the physical IP address before the start of the installation of 11.1.1.5.
For more information have a look at Oracle support doc id: 1333429.1
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=PROBLEM&id=1333429.1
Regards,
Kalyan Chukkapalli
http://123obi.com

Getting error while installing OBIEE 11g

Hello,
I am trying to install OBIEE 11g to my machine.I created the schema and all.
at the end got this error at the installation progress step.
The status bar shows 46% .
Installation Failed. OUI Session failed invalid entry CRC (expected 0xa8bed9c4 but got 0x87bc0dd6).
What to do now?
Thanks

Hi,
Deinstalled & clean your registry and delete the obiee folders from the drive and follow the below steps,
Reference link: Courtsey to Atulkumar.
http://onlineappsdba.com/index.php/2010/08/14/obiee-11g-111130-documentation-installation/
or
- installed RCU
- installed 64 bits JDK (jdk-6u21-windows-x64.exe)
- installed Weblogic (wls1033_generic.jar) (Find the Steps : and Specify the installation Drive)
- installed OBI as "software only" (hesr follow as per Viktor Kibsgaard said) (*Here also Specify the same installation Drive*)
- configured OBI (config.bat you can find in <obi11g home>\Oracle_BI1\bin)
Steps : You can find the generic jar here:
http://www.oracle.com/technetwork/middleware/ias/downloads/wls-main-097127.html
and take the generic one (http://download.oracle.com/otn/nt/middleware/11g/wls1033_generic.jar)
You may install this by a command like this : java -XXm.... .... wls1033_generic.jar
Then a installer pops up.
Reference link: Courtsey to Atulkumar.
http://onlineappsdba.com/index.php/2010/08/14/obiee-11g-111130-documentation-installation/
Hope this works for you too.

Error while Installing OBIEE 11G

Hello Gurus,
I am attempting to connect to Oracle Database 10g XE edition with OBIEE 11G.
While Installation, at "Database Details" stage, the installation process asks for username and password. I have created username and password in database with CONNECT/RESOURCE/DBA roles.
However I am still getting following error.
INST-08031: Unable to connect to the Database with the given credentials. Invalid user name/password
Check the values. Make sure the Database is up and running and connect string, user name and password are correct. Enter a valid user name with DBA privilegesWhat am I missing? Why it is not validating the username and pwd created in DB. All host name is entered exactly as required. localhost:1521:xe
Thanks,
R

Can you try adding the priviledge "Create sequence"?
Also check this out http://download.oracle.com/docs/html/E18558_01/fusion_requirements.htm#CHDGICGE

Error in starting OBIEE 11g BI services

Hi,
When i starting the BI services I am getting the following error in browser page.
Error:
Error 500--Internal Server Error
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.5.1 500 Internal Server Error
The server encountered an unexpected condition which prevented it from fulfilling the request.
Url:
http://10.154.19.91:9704/analytics/saw.dll?bieehome&startPage=1
Adminserver log report:
Created "1" resources for pool "mds-owsm", out of which "1" are available and "0" are unavailable.
How to solve this?
Thanks,

Hi sateesh,
Seems your database listerner and opmnctl is down....first start these in your services pane and then try starting your BI server....but keep in mind close the admin tool if it is open .
This might also help [http://gerardnico.com/wiki/dat/obiee/start_11g]
By,
KK

Error While configuring PeopleSoft Listener Web Service in new OIM setup

Hello,
setup 1: I've an existing OIM 9102 BP15 install with JBOSS server. PeopleSoft Listener Web Service is setup on this environment to read Change-Based Reconciliation.
setup 2: I installed a parallel OIM 9102 BP15 with Weblogic server pointing to the same database (as with JBOSS) when JBOSS was down. This a new parallel environment to JBOSS and works alright. However, when i tried accessing the endpoint URL after successfully deploying the same peopleSoftUserMgmt.war into weblogic...(updated xlclient.properties - all other configuration remained the same)
i see below error:
####<Mar 20, 2012 3:21:34 PM PDT> <Error> <HTTP> <my-hostname> <OIM_SERVER1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <e24a8026bbd689e0:f44fe7f:136322f4b1e:-8000-000000000000002e> <1332282094570> <BEA-101017> <[ServletContext@321747825[app:peopleSoftUserMgmt module:peopleSoftUserMgmt.war path:/peopleSoftUserMgmt spec-version:null]] Root cause of ServletException.
javax.servlet.ServletException: Error initializing reconciliation
at Com.thortech.xl.Integration.peoplesoft.PeopleSoftAction.initializeRecon(Unknown Source)
at Com.thortech.xl.Integration.peoplesoft.PeopleSoftAction.execute(Unknown Source)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1485)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:509)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:184)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3717)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Any pointer to resolution?
Thanks,

Does it means that
1) deploy peopleSoftUserMgmt.war as a application file through Weblogic console (Deployments -> install -> upload files -> .....).
2) Then go to deployed folder (which folder?? ..../Oracle/Middleware/user_projects/domains/oim_domain/servers/OIM_SERVER1/stage/peopleSoftUserMgmt/peopleSoftUserMgmt.war) and manually replace the folder content with separately exploded peopleSoftUserMgmt.war/ folder ?
thanks,

Error while configuring database for foundation service on EPM 11.1.2.1

Hi,
I have installed the foundation service and the database is Oracle. Before I tried to configue database for it, I created a tablespace naming HYPFS in Oracle and also I created a user HYPFS whose default tablespace is HYPFS. I gave the user CONNECT and RESOURCE role, the privilege is also enough as SYSDBA.
In the configue panal, I entered the sid as orcl, the username is HYPFS and password *********, but I clicked the next step ,there came out an error. When I read the relavent log, the error is as folllows:
[2012-05-22T14:34:18.718-12:00] [EPMREG] [ERROR] [EPMREG-11073] [oracle.EPMREG.REG] [tid: 35] [ecid: 0000JTrYrcZFs1apxKc9yW1Fj45I00000N,0] execute SQL INSERT INTO HSS_COMPONENT_PROPERTY_VALUES(PROPERTY_VALUE, PROPERTY_NAME, COMPONENT_ID) VALUES(?, ?, ?) error。
[2012-05-22T14:34:18.718-12:00] [EPMREG] [ERROR] [EPMREG-11099] [oracle.EPMREG.REG] [tid: 35] [ecid: 0000JTrYrcZFs1apxKc9yW1Fj45I00000N,0]
java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist.
Should these tables like HSS_* be created automatically? How comes out such kind of error? Does anyone have any idea? Thanks in advance.

Hi,
How are you creating the tablespace and user?
Name of the Tablespace and User should be in Capslock otherwise it gives issues
Is it through SQL Plus or through the Web Console?
Login to SQL Plus and try to execute the following query. I am assuming that oracle is installed on the C drive. The path of data file is valid only if it is on C drive
CREATE SMALLFILE TABLESPACE "HYPFS1" DATAFILE 'C:\app\Administrator\oradata\orcl\HYPFS1' SIZE 100M REUSE AUTOEXTEND ON NEXT 100M MAXSIZE 32767M LOGGING EXTENT MANAGEMENT LOCAL SEGMENT SPACE MANAGEMENT AUTO DEFAULT NOCOMPRESS;After the tablespace is created provide with the following rights
CREATE USER "HYPFS1" PROFILE "DEFAULT" IDENTIFIED BY "password" DEFAULT TABLESPACE "HYPFS1" TEMPORARY TABLESPACE "TEMP" ACCOUNT UNLOCK;
GRANT UNLIMITED TABLESPACE TO "HYPFS1" WITH ADMIN OPTION;
GRANT "CONNECT" TO "HYPFS1" WITH ADMIN OPTION;
GRANT "DBA" TO "HYPFS1" WITH ADMIN OPTION;Then try to connect
Database Type : Oracle's Driver(Thin)
Server : localhost
Port : 1521
SID: orcl
Username : Whatever username you have provided/HYPFS1
Password : Password provided for the userand then try to connect.
Thanks
Saurabh
Edited by: Saurabh on May 22, 2012 2:09 AM

Error While Configuring the Shared Service with Active Directory

Hi All,
I am getting a error while configuring MSAD with Shared Service, when entering the User Id and password and clicking next, the following error is displayed:
"EPMCSS-05180:Failed to validate Security configuration. Failed to connect. Invalid values for Base DN, User DN or Password. Enter valid value(s). Root Cause : [LDAP: error code 49 - 80090308: LdapErr: DSID-0C0903A9, comment: AcceptSecurityContext error, data 52e, v1db1]"
The AD user has the read access to the all users and group in Active Directory. If I use an Active Directory user with Admin privilege, It is getting connected.
But client is not ready to provide the Admin Access due to their internal policy and I also don't have any document which says admin privilege is required. According to the document,the user should have the following privileges only.
"The distinguished name of the user that Shared Services should use to bind with the user directory. This user must have search privilege on the RDN attribute within the DN. For example, in the dn: cn=John Doe, ou=people, dc=myCompany, dc=com, the bind user should have search access to the cn attribute.Special characters in User DN must be specified using escape characters. See “Using Special Characters” on page 46 for restrictions.
Example: cn=admin,dc=myCompany,dc=com
But I am getting confused with the statement "This user must have search privilege on the RDN attribute within the DN". Is it not search privillege?
Can anybody help me with required privilege for Active Directory user to configure with Shared Service.
Thanks in Advance,
Sunil

Thank you All,
i tried connecting using AD Browser from Microsoft, and it went in properly. then i found out that the AD Team here were giving a Wrong Credentials to connect, they Gave me HYP_OID which infact turned out to be a Principal name instead of a 'cn'.
after searching in the AD Browser i found the correct cn which is "Hyperion OID", then it went to the second Screen where now i am trying to search for the Users based on thier Job Nature.
Thank you for all the Support Guys, you both "Celvin" and "John" are the Top Guys under my Search list for any technical Assistance.
Thank you once again Friends....
Regards,
Sunil...
Shantan....

OBIEE 11g installation error while configuring (opmnctl error)

While installing OBIEE 11g (11.1.1.3.0),(32-bit) we have choosen software only install and the software was installed successfully. While configuring in 10 th step we are getting the following errors.
We have installed webserver before installing OBIEE 11g.
OS is Windows server 2008
Executing: opmnctl start coreapplication_obips1 falied and
Executing: opmnctl start coreapplication_obisch1.
we are using dynamic IP address

Thanks, It worked. I unzipped all the folders in a single folder and then with the single Setup.exe it automatically loaded the complete software.
Best Way - Import all the download file into a single folder and run the .exe
Thanks,
Raman

Error while Configuring environment parameters

Hi,
I am installling Oracle Utilities Business Intelligence 2.3.2 version . I am getting error while configuring Environment Paramameters
Database- Oracle 11g R2
OS- Windows Server 2008
1. Environment Description
Environment Description: DEV01
2. Business Application Server Configuration
Business Server Host: 01HW342889
WebLogic Server Name: myserver
Business Server Application Name: SPLService
MPL Admin Port Number: 6502
MPL Automatic startup: false
3. Web Application Server Configuration
Web Server Host: 01HW342889
Web Server Port Number: 6500
WebLogic SSL Port Number: 6501
Web Context Root: ouaf
WebLogic JNDI User ID: systemjndi
WebLogic JNDI Password: ENC(tEky0TX65m0nDNIlnX
CcwlbnXl2b1kMnvE8DD0wfI1Y=)
WebLogic Admin System User ID: {3DES}gg8gG+5N+gwJBPWG
IhRRuQ==
WebLogic Admin System Password: {3DES}gg8gG+5N+gwJBPWG
IhRRuQ==
WebLogic Server Name: myserver
Web Server Application Name: SPLWeb
Application Admin User ID: appladmin
Application Admin Password: ENC(OrIg4HyDLxi2kQ6uSs
cBz4cubUr2U5BbRl75SY2pP6Q=)
Expanded Directories: false
Application Viewer Module: true
4. Database Configuration
JDBC Name: oubi-jdbc
MPL Database User ID: SPLADMV2
MPL Database Password: ENC(mfG7quacTagw5qEvov
oaQIRpnogRvroY4NcXp6WZCZo=)
XAI Database User ID: SPLADMV2
XAI Database Password: ENC(tNfRJUthvYQR990TzW
314nXU+5jWBuYBDs5AgT5qG7g=)
Batch Database User ID: SPLADMV2
Batch Database Password: ENC(L5BXr/lXp/riShr9Lp
kFDsgUIjDm5I6TJU5Suz0Wy/k=)
JDBC Database User ID: SPLADMV2
JDBC Database Password: {3DES}L43JfrbOrCtupkwm
4I/Adw==
Database Name: DEV1
Database Server: 01HW342889
Database Port: 1701
ONS Server Configuration:
Database Override Connection String:
Oracle Client Character Set NLS_LANG: AMERICAN_AMERICA.UTF8
5. General Configuration Options
Batch RMI Port: 6509
Batch Mode: CLUSTERED
Coherence Cluster Name: OUBICLUSTER1
Coherence Cluster Address: 172.25.138.45
Coherence Cluster PORT: 6508
Coherence Cluster Mode: dev
Each item in the above list should be configured for a successful install.
Choose option (1,2,3,4,5, Process, <X> Exit): P
--> Calculating additional variables ... done.
--> Writing variables to E:\OUBI2\ouaf\temp\FW.V4.0.2\tmp\2011-06-10-0954\ENVIRO
N.INI ... done.
Can't open E:\OUBI2\ouaf\temp\FW.V4.0.2\install_FW_E:\OUBI2\ouaf\DEV01.log for o
utput at E:\OUBI2\ouaf\temp\FW.V4.0.2\data\bin\perllib/SPL/splLog.pm line 190.
"ERROR - Detected while running install.plx."
Thks,
Mohan

This is a common error people get when configuring Repository Service in Admin Console...
Main reason for this is that there is an incompatible bit versions of Oracle Database and Informatica Server and windows. Try to reinstall Oracle DB or Infa Server and tryconfiguring the same it will work
Or it could be parameter issues if it is linux...
Please mark helpful this post

Dac error while configuring

Hello All,
I am trying to configure Dac on windows7 64 bit but getting the error...
Configuration: Windows7 64bit
Oracle DB: Oracle 11g
Dac Version : 10.1.3.4.1
Informatica: 9x
Obiee 11g
Already copy the file odjbc5.jar file into dac_home\bifoundation\dac\lib
Created the user Dac_rep with all the required privileges.
But still getting below error while configuring and testing:
MESSAGE:::The Network Adapter could not establish the connection
EXCEPTION CLASS::: java.sql.SQLException
oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:412)
oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:531)
oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:221)
oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:503)
java.sql.DriverManager.getConnection(DriverManager.java:582)
java.sql.DriverManager.getConnection(DriverManager.java:185)
com.siebel.etl.gui.login.LoginDataHandler$LoginStructure.testConnection(LoginDataHandler.java:514)
com.siebel.etl.gui.login.LoginDataHandler.testConnection(LoginDataHandler.java:386)
com.siebel.etl.gui.login.ConnectionTestDialog$Executor.run(ConnectionTestDialog.java:290)
::: CAUSE :::
MESSAGE:::The Network Adapter could not establish the connection
EXCEPTION CLASS::: oracle.net.ns.NetException
oracle.net.nt.ConnStrategy.execute(ConnStrategy.java:359)
oracle.net.resolver.AddrResolution.resolveAndExecute(AddrResolution.java:422)
oracle.net.ns.NSProtocol.establishConnection(NSProtocol.java:672)
oracle.net.ns.NSProtocol.connect(NSProtocol.java:237)
oracle.jdbc.driver.T4CConnection.connect(T4CConnection.java:1042)
oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:301)
oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:531)
oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:221)
oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:503)
java.sql.DriverManager.getConnection(DriverManager.java:582)
java.sql.DriverManager.getConnection(DriverManager.java:185)
com.siebel.etl.gui.login.LoginDataHandler$LoginStructure.testConnection(LoginDataHandler.java:514)
com.siebel.etl.gui.login.LoginDataHandler.testConnection(LoginDataHandler.java:386)
com.siebel.etl.gui.login.ConnectionTestDialog$Executor.run(ConnectionTestDialog.java:290)
::: CAUSE :::
MESSAGE:::Connection refused: connect
EXCEPTION CLASS::: java.net.ConnectException
java.net.PlainSocketImpl.socketConnect(Native Method)
java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
java.net.Socket.connect(Socket.java:519)
oracle.net.nt.TcpNTAdapter.connect(TcpNTAdapter.java:141)
oracle.net.nt.ConnOption.connect(ConnOption.java:123)
oracle.net.nt.ConnStrategy.execute(ConnStrategy.java:337)
oracle.net.resolver.AddrResolution.resolveAndExecute(AddrResolution.java:422)
oracle.net.ns.NSProtocol.establishConnection(NSProtocol.java:672)
oracle.net.ns.NSProtocol.connect(NSProtocol.java:237)
oracle.jdbc.driver.T4CConnection.connect(T4CConnection.java:1042)
oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:301)
oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:531)
oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:221)
oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:503)
java.sql.DriverManager.getConnection(DriverManager.java:582)
java.sql.DriverManager.getConnection(DriverManager.java:185)
com.siebel.etl.gui.login.LoginDataHandler$LoginStructure.testConnection(LoginDataHandler.java:514)
com.siebel.etl.gui.login.LoginDataHandler.testConnection(LoginDataHandler.java:386)
com.siebel.etl.gui.login.ConnectionTestDialog$Executor.run(ConnectionTestDialog.java:290)
Kindly help, already googled but no luck.
Thanks & Regards
Anu

Check your config.bat config
just in case refere this Oracle BI Solutions: DAC - Installation and Configuration v10.1.3.4.1 on Windows

Getting an error while configuring VMM for System Center 2012. error - An internal error has occurred trying to contact an agent on the WIN-NTJU8CNU server: : . Ensure the agent is installed and running.

Hi,
I am trying to install "System Center 2012 - Virtual Machine Manager by Using a Pre-Configured VHD".
I downloaded install guide & the binaries from http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=10712
I have followed the installation document & getting an error while configuring VMM for System Center 2012.
error details from log file given below:
01:12:24:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.Carmine.WSManWrappers.WSManProviderException, Exception.Message: An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
01:12:24:StackTrace:   at Microsoft.Carmine.WSManWrappers.ErrorContextParameterHelper.ThrowTranslatedCarmineException(WsmanSoapFault fault, COMException ce)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.RetrieveUnderlyingWMIErrorAndThrow(SessionCacheElement sessionElement, COMException ce)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
   at Microsoft.Carmine.WSManWrappers.AgentManagement.AssociateLibrary(WsmanAPIWrapper wsmanObject, String CertificateSubjectName, String& ExportedCertificate, ErrorInfo& ErrorInfo)
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateAgentServer(String fullyQualifiedServerName)
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateDefaultLibraryServer()
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.SetupLibraryShare()
   at Microsoft.VirtualManager.Setup.InstallItemCustomDelegates.PangaeaServerPostinstallProcessor()
01:12:24:InnerException.Type: System.Runtime.InteropServices.COMException, InnerException.Message: There is a time and/or date difference between the client and server.
01:12:24:InnerException.StackTrace:   at WSManAutomation.IWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
   at Microsoft.Carmine.WSManWrappers.MyIWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
01:12:24:ProcessInstalls: Running the PostProcessDelegate returned false.
01:12:24:ProcessInstalls: Running the PostProcessDelegate for PangaeaServer failed.... This is a fatal item. Setting rollback.
01:12:24:SetProgressScreen: FinishMinorStep.
01:12:24:ProcessInstalls: Rollback is set and we are not doing an uninstall so we will stop processing installs
I have completed MSSQL server configuration and while configuring VMM the below error displayed in the wizard:
An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
I have checked that the following services are running:
1) Verified WS-Management srvice 2) MSSQL server + MSSQL (agent) 3)SC VM Manager Agent 4) Windows management instrumentation .
I have joined the VM (on which installing SC VMM) in a domain(as per install guide) and installing VMM using domain account & it is in local Administrators group.
Also I would like know if there is any stand alone SC VMM installer. If yes then please let me know the installer location & install guide.
thanks.
====

Have you installed AppController on the same machine with VMM?

Error while installing oracle 11g in centos 5.3

I got this error while installing oracle 11g in my laptop with centos 5.3
the error is:
./runInstaller
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 80 MB. Actual 76430 MB Passed
Checking swap space: must be greater than 150 MB. Actual 6000 MB Passed
Checking monitor: must be configured to display at least 256 colors
Could not execute auto check for display colors using command /usr/bin/xdpyinfo. Check if the DISPLAY variable is set. Failed <<<<Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,
Continue? (y/n) [n] y
Ignoring required pre-requisite failures. Continuing...Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-03-07_12-09-48PM. Please wait ...[oracle@www database]$ Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
Exception in thread "main" java.lang.NoClassDefFoundError
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:164)
at java.awt.Toolkit$2.run(Toolkit.java:821)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Toolkit.getDefaultToolkit(Toolkit.java:804)
at com.jgoodies.looks.LookUtils.isLowResolution(Unknown Source)
at com.jgoodies.looks.LookUtils.<clinit>(Unknown Source)
at com.jgoodies.looks.plastic.PlasticLookAndFeel.<clinit>(PlasticLookAndFeel.java:122)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:242)
at javax.swing.SwingUtilities.loadSystemClass(SwingUtilities.java:1783)
at javax.swing.UIManager.setLookAndFeel(UIManager.java:480)
at oracle.install.commons.util.Application.startup(Application.java:758)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:164)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:181)
at oracle.install.commons.base.driver.common.Installer.startup(Installer.java:265)
at oracle.install.ivw.db.driver.DBInstaller.startup(DBInstaller.java:114)
at oracle.install.ivw.db.driver.DBInstaller.main(DBInstaller.java:132)
please help me solve this...i am new to linux so can anyone give me detailed instructions.i tried using the installation guide and even though i got this error...

Firstly Thank you everyone for giving me your suggestions.
I tried installing oracle 11g in centos using Tim's tutorial and i all went fine initially i got the oracle 11g installation GUI and i got an error while starting database configuration.
The error was : TNS failed
and i got two options in that dialog box "ignore" and "abort"
after press ignore a few times.the installation finished successfully.
When i opened terminal and typed
sqlplus SYS as SYSDBA
it asked for password
when i gave the password again it showed the error TNS failed
kindly help me solve this.....

Error while configuring OBIEE 11G OPMN Service during Installtion

Similar Messages

Maybe you are looking for