Error while configuring SNC(secure network connection) ( SAP JCo 3.0.5)

Hi,
This is security specific issue with regard to SNC configuration, may I suggest you to open a thread at forum : SAP Netweaver -> Security ?
Regards,
Vincent

Thanks for the suggestion

Similar Messages

"Error while Printing" on ethernet network connected iMac.

Have 2 iMacs sharing a Canon MP530, one directly connected, the other via a Linksys ethernet router. Upon a print request, the networked computer locates the MP530 and displays the standard print page, but shortly after clicking Print (or Preview) the "Error while Printing" message is displayed. Under some conditions in the past we have been able to print from the networked machine, but now we're stuck and nothing seems to fix the problem.

Since you have 10.4.10 installed, I'm betting that you were able to print before this update was installed. Anyway, the first thing I would do is delete the printer from the 'client' (the iMac connecting to the shared printer). Open Printer Setup Utility, select the MP530 and delete it. Then click on Printer Setup Utility and select Reset Printing System. This should remove the Canon MP driver files. Then run the printer driver installer again and once completed, add the printer via the Printer Setup Utility, by clicking Add > Default Browser and select the Shared Printer.
I would also try running a Repair Disk Permissions and if that doesn't help then try using Fixamac's Printer Setup Repair utility.

I'd a error message about a security network connection that has not been correctly cleaned up each time I open the browser

Every time I open the browser an error message pops up, it says:
"The operation can bot be completed because of an internal failure. A secure network communication has not been cleaned up correctly."
The main difference I saw is that my home page, a customize igoogle one that needs login, is redirected to the main igoogle page because login is not successful and I had to manually do it. Even if I state to remember me, it doesn't work once I close the browser.

This is a known bug that will be fixed in beta 7. You should only get that error message the first time after updating Firefox. If you are getting it all the time, are you switching between different versions of Firefox?
Do you still have an earlier version of Firefox installed, and if you do does it use the same profile as the beta version. If you do that can cause problems since Firefox 4 handles extensions in a different way than earlier versions of Firefox. If you do have 2 versions of Firefox installed, you need to use 2 different profiles.

ERROR While Configuring the SSL Key Pair SAP NW 7.3

I am trying to create new key pair entry to use for SSL. I am getting weird error, after importing certificate response ssl-credential entry goes invalid.
Below are list of step I carried prior getting error.
1) Deleted existing Java key pair from existing view ICM_SSL_<Instance_ID>
2) Generated new pair entry
3) Generated certificate sign request.
4) Sent to SAP CA at SAP Trust Center Service at service.sap.com/tcs.
5) Import certificate request.
And ssl-credential entry turns red , with error"This entry expired"
Please see screenshot below

I am trying to create new key pair entry to use for SSL. I am getting weird error, after importing certificate response ssl-credential entry goes invalid.
Below are list of step I carried prior getting error.
1) Deleted existing Java key pair from existing view ICM_SSL_<Instance_ID>
2) Generated new pair entry
3) Generated certificate sign request.
4) Sent to SAP CA at SAP Trust Center Service at service.sap.com/tcs.
5) Import certificate request.
And ssl-credential entry turns red , with error"This entry expired"
Please see screenshot below

GSS API library required to set up a Secure Network Connection (SNC)

We are working in a project to connect Microsoft ILM to SAP CUA. The goal is to manage Identities in
SAP CUA by Microsoft ILM.
The requirement is to make use of an encrypted network connection between the two systems.
Due to our investigation it looks like that we need to use a SNC (Secure Network Connection).
To set up a SNC we need a third party GSS API library. Before we can order this GSS API library we need to
test this in a test environment.
Our question if there is a possibility that we can use a trial version of a GSS API library, to set up a test environment?
Is there another way to setup a SNC in a test environment?
We are looking for a GSS API Library?
If you need more information please contact me.

Hi AndrZegers ,
This is Supply Network collaboration (SNC) forum and your query looks like more of security.
You can post your query in security forum.
Security
Regards,
Nikhil

Secure network connection

I am getting an error message that a secure network connection could not be established. (Make sure SSL 3.0 or TLS 1.0 is enabled in the Internet Options control panel, then try again.
I have found that they are enabled but am still not able to pass that point. What am I doing wrong?

http://discussions.apple.com/thread.jspa?threadID=1594716&tstart=0
This worked for me.

Hyper-V encountered an error while Configuring the network on Vmachine

Hi all,
i am novice in window server 201, I learning from a ebook.While i doing the step of creating virtual machine , i got this error
Hyper-V encountered an error while configuring the network on Vmachine
Hyper-V encountered an error trying to access an object on computer 'localhost' because the object was not found. The object might have been deleted, or you might not have permission to perform the task. Verify that the virtual Machine Management service
on the computer is running. If the service is running,try to perform the task again by using Run as Administrator

Windows Server 201? Are you sure?
What sort of machine are you trying to install and run Hyper-V on? What OS is it running?
Bill

Error While Configuring the Shared Service with Active Directory

Hi All,
I am getting a error while configuring MSAD with Shared Service, when entering the User Id and password and clicking next, the following error is displayed:
"EPMCSS-05180:Failed to validate Security configuration. Failed to connect. Invalid values for Base DN, User DN or Password. Enter valid value(s). Root Cause : [LDAP: error code 49 - 80090308: LdapErr: DSID-0C0903A9, comment: AcceptSecurityContext error, data 52e, v1db1]"
The AD user has the read access to the all users and group in Active Directory. If I use an Active Directory user with Admin privilege, It is getting connected.
But client is not ready to provide the Admin Access due to their internal policy and I also don't have any document which says admin privilege is required. According to the document,the user should have the following privileges only.
"The distinguished name of the user that Shared Services should use to bind with the user directory. This user must have search privilege on the RDN attribute within the DN. For example, in the dn: cn=John Doe, ou=people, dc=myCompany, dc=com, the bind user should have search access to the cn attribute.Special characters in User DN must be specified using escape characters. See “Using Special Characters” on page 46 for restrictions.
Example: cn=admin,dc=myCompany,dc=com
But I am getting confused with the statement "This user must have search privilege on the RDN attribute within the DN". Is it not search privillege?
Can anybody help me with required privilege for Active Directory user to configure with Shared Service.
Thanks in Advance,
Sunil

Thank you All,
i tried connecting using AD Browser from Microsoft, and it went in properly. then i found out that the AD Team here were giving a Wrong Credentials to connect, they Gave me HYP_OID which infact turned out to be a Principal name instead of a 'cn'.
after searching in the AD Browser i found the correct cn which is "Hyperion OID", then it went to the second Screen where now i am trying to search for the Users based on thier Job Nature.
Thank you for all the Support Guys, you both "Celvin" and "John" are the Top Guys under my Search list for any technical Assistance.
Thank you once again Friends....
Regards,
Sunil...
Shantan....

Windows 8.1 Hyper-V - Error while configuring the hard disk 0xC03A0014

Hello. I have just enabled Hyper-V on my Windows 8.1 laptop.
Dell Latitude E7440 i7-4600U @ 2.10GHz
I can create a Virtual-Switch but I am unable to create a new Hard Disk or Virtual Machine within Hyper-V. I get the same error for both processes.
Error: The Virtual Machine Management Service encountered an error while configuring the hard disk on virtual machine New Virtual Machine.
Failed to create the virtual hard disk.
The system failed to create C:\Users\user\Documents\Test\New.vhdx .
Failed to create the virtual hard disk
The system failed to create C:\Users\user\Documents\Test\New.vhdx . A Virtual disk support provider for the specified file was not found. (0xC03A0014).
I have ran all Dell Client System updates and all of windows updates.
I have attempted to create a virtual machine on the current SSD and also an external drive. The same error appears.
I have also attempted to create a virtual hard disk via Hyper-v with a Base vhdx, still the same error occurs. I've tested the base image on other laptops of the same model and windows 8.1 without issue.
Any thoughts on how I can fix this?
Thank you,
-Jake

Hi Jake,
"Enable Data Execution Protection (DEP) in the BIOS and make sure the Format of drive file system is not fat32.
1. Uninstall Intel Active System Monitor 3.0, if installed.
2. Disable "Intel IPMI Service" and "Intel Monitoring Agent" Service.
3. Open regedit and locate: HKLM\System\CurrentControlSet\Services\imbdrv.
4. Change the Start Key to 4 (Disabled).
5. Locate HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E97D-E325-11CE-BFC1-0 8002BE10318}.
6. Take ownership of the ‘Properties’ key.
7. Give yourself full permission for this key.
8. Now locate the properties key; if you see a ‘Security’ entry there, that is your problem. Delete this key.
9. Try attaching or adding the VHD again after rebooting.
If above steps did not help, add the Network Service account to Local Administrator group."
It is quoted from the similar thread below :
http://social.technet.microsoft.com/Forums/windows/en-US/55085ff3-0f26-41bd-b590-bb3490e2d6f5/win-7-professional-a-virtual-disk-support-provider-for-the-specified-file-was-not-found?forum=w7itprovirt
Hope it helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Error while configuring saprouter

Hi,
I m getting error while configuring saprouter.
When i run the command get_pse -v -r certreq -p local.pse"DN name".I get the following error.
get_pse: Malformed distinguished name "pqprojsrv CN=pqprojsrv, OU=0000756782, O
U=SAProuter, O=SAP, C=DE"
ERROR in Name2DName: (12321/0x3021) problem parsing DName : "unknown key or malf
ormed OID"
ERROR in aux_Name2ObjId: (1/0x0001) unknown algorithm : "PQPROJSRV CN"
Please suggest on this .
Thanks in advance.
Regards,
Amit

Hi,
I resolved tht issue.but now when im starting saprouter it gives me following error :
trcfile dev_rout
no logging active
routtab cannot open './saprouttab': EXIT PROGRAM !!!
(running without saproutab is no longer supported for security reasons)
Could not open permission table
saprouttab is nt created in saprouter directory.
Please suggest
Thanks in advance.
Regards,
Amit

Dac error while configuring

Hello All,
I am trying to configure Dac on windows7 64 bit but getting the error...
Configuration: Windows7 64bit
Oracle DB: Oracle 11g
Dac Version : 10.1.3.4.1
Informatica: 9x
Obiee 11g
Already copy the file odjbc5.jar file into dac_home\bifoundation\dac\lib
Created the user Dac_rep with all the required privileges.
But still getting below error while configuring and testing:
MESSAGE:::The Network Adapter could not establish the connection
EXCEPTION CLASS::: java.sql.SQLException
oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:412)
oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:531)
oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:221)
oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:503)
java.sql.DriverManager.getConnection(DriverManager.java:582)
java.sql.DriverManager.getConnection(DriverManager.java:185)
com.siebel.etl.gui.login.LoginDataHandler$LoginStructure.testConnection(LoginDataHandler.java:514)
com.siebel.etl.gui.login.LoginDataHandler.testConnection(LoginDataHandler.java:386)
com.siebel.etl.gui.login.ConnectionTestDialog$Executor.run(ConnectionTestDialog.java:290)
::: CAUSE :::
MESSAGE:::The Network Adapter could not establish the connection
EXCEPTION CLASS::: oracle.net.ns.NetException
oracle.net.nt.ConnStrategy.execute(ConnStrategy.java:359)
oracle.net.resolver.AddrResolution.resolveAndExecute(AddrResolution.java:422)
oracle.net.ns.NSProtocol.establishConnection(NSProtocol.java:672)
oracle.net.ns.NSProtocol.connect(NSProtocol.java:237)
oracle.jdbc.driver.T4CConnection.connect(T4CConnection.java:1042)
oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:301)
oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:531)
oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:221)
oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:503)
java.sql.DriverManager.getConnection(DriverManager.java:582)
java.sql.DriverManager.getConnection(DriverManager.java:185)
com.siebel.etl.gui.login.LoginDataHandler$LoginStructure.testConnection(LoginDataHandler.java:514)
com.siebel.etl.gui.login.LoginDataHandler.testConnection(LoginDataHandler.java:386)
com.siebel.etl.gui.login.ConnectionTestDialog$Executor.run(ConnectionTestDialog.java:290)
::: CAUSE :::
MESSAGE:::Connection refused: connect
EXCEPTION CLASS::: java.net.ConnectException
java.net.PlainSocketImpl.socketConnect(Native Method)
java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
java.net.Socket.connect(Socket.java:519)
oracle.net.nt.TcpNTAdapter.connect(TcpNTAdapter.java:141)
oracle.net.nt.ConnOption.connect(ConnOption.java:123)
oracle.net.nt.ConnStrategy.execute(ConnStrategy.java:337)
oracle.net.resolver.AddrResolution.resolveAndExecute(AddrResolution.java:422)
oracle.net.ns.NSProtocol.establishConnection(NSProtocol.java:672)
oracle.net.ns.NSProtocol.connect(NSProtocol.java:237)
oracle.jdbc.driver.T4CConnection.connect(T4CConnection.java:1042)
oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:301)
oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:531)
oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:221)
oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:503)
java.sql.DriverManager.getConnection(DriverManager.java:582)
java.sql.DriverManager.getConnection(DriverManager.java:185)
com.siebel.etl.gui.login.LoginDataHandler$LoginStructure.testConnection(LoginDataHandler.java:514)
com.siebel.etl.gui.login.LoginDataHandler.testConnection(LoginDataHandler.java:386)
com.siebel.etl.gui.login.ConnectionTestDialog$Executor.run(ConnectionTestDialog.java:290)
Kindly help, already googled but no luck.
Thanks & Regards
Anu

Check your config.bat config
just in case refere this Oracle BI Solutions: DAC - Installation and Configuration v10.1.3.4.1 on Windows

WS And Web Dynpro: Error while processing document security

Hi all,
We have a problem when use Web Services (stateless session bean) in Web Dynpro.
When two users calls the same web dynpro in the same time we have this error:
Errore in: it.sap.mdm.pdcmodelcomponent.wdp.InternalLookUpModelController getLookUpTable:
Class___: com.sap.tc.webdynpro.model.webservice.api.WDWSModelExecuteException Additional Info:
Message_: Exception on execution of web service on destination 'FS_MDM_PDC' for operation 'getLookupTable' in interface 'ZMDM_FS_PDCVi_Document'
Causa__:
Error while processing document security. The error was class com.sap.engine.frame.core.configuration.ConfigurationException Configuration webservices/proxies/sap.com/ mapping is not valid - configuration is closed.. See trace entry [no trace for com.sap.security.core.client.ws.DeployableSecurityProtocol (severity above PATH)].; nested exception is: com.sap.engine.services.webservices.jaxrpc.wsdl2java.ClientProtocolException: Error while processing document security. The error was class com.sap.engine.frame.core.configuration.ConfigurationException Configuration webservices/proxies/sap.com/ mapping is not valid - configuration is closed.. See trace entry [no trace for com.sap.security.core.client.ws.DeployableSecurityProtocol (severity above PATH)].
If I call the same web dynpro ,without other user, it's ok.
Where is the problem?
I have to congigure some parameter in J2ee???

Hi
Use this pdf to implement Mutual Exclusion
http://java.sun.com/developer/Books/performance2/chap3.pdf
http://navet.ics.hawaii.edu/~casanova/courses/ics432_fall08/slides/ics432_jmonitors.ppt#313,10,Synchronizing on Multiple Objects
thanks

Error while configuring work repository details in topology Manager

Hi,
Could anyone pls advice, is it possible creating more than one Master repository connection for the same instance.
When i try to do so, am getting the below error while configuring the work repository details in topology manager.
“A work repository already exists for this connection.
Enter the repository password to declare it in your Master Repository”
I tried with both the new master and work repository password. But no luck.
Previous Master & work details:
Master: PCS_MASTER
Work:PCS_WORKREP
New Details
Master: PCS_MASTER_INT
Work:PCS_WORKREP_INT
Instance: PCBID
Am trying to create new master repository for PCS_MASTER_INT.

In the same oracle schema you can have only 1 master and 1 work repository. Usually they take 2 schema (1 for each).
If you need 2 master repository you have to use 2 different jdbc path. I'm using a db with several master / work, each repo has got its schema..

Error while Configuring environment parameters

Hi,
I am installling Oracle Utilities Business Intelligence 2.3.2 version . I am getting error while configuring Environment Paramameters
Database- Oracle 11g R2
OS- Windows Server 2008
1. Environment Description
Environment Description: DEV01
2. Business Application Server Configuration
Business Server Host: 01HW342889
WebLogic Server Name: myserver
Business Server Application Name: SPLService
MPL Admin Port Number: 6502
MPL Automatic startup: false
3. Web Application Server Configuration
Web Server Host: 01HW342889
Web Server Port Number: 6500
WebLogic SSL Port Number: 6501
Web Context Root: ouaf
WebLogic JNDI User ID: systemjndi
WebLogic JNDI Password: ENC(tEky0TX65m0nDNIlnX
CcwlbnXl2b1kMnvE8DD0wfI1Y=)
WebLogic Admin System User ID: {3DES}gg8gG+5N+gwJBPWG
IhRRuQ==
WebLogic Admin System Password: {3DES}gg8gG+5N+gwJBPWG
IhRRuQ==
WebLogic Server Name: myserver
Web Server Application Name: SPLWeb
Application Admin User ID: appladmin
Application Admin Password: ENC(OrIg4HyDLxi2kQ6uSs
cBz4cubUr2U5BbRl75SY2pP6Q=)
Expanded Directories: false
Application Viewer Module: true
4. Database Configuration
JDBC Name: oubi-jdbc
MPL Database User ID: SPLADMV2
MPL Database Password: ENC(mfG7quacTagw5qEvov
oaQIRpnogRvroY4NcXp6WZCZo=)
XAI Database User ID: SPLADMV2
XAI Database Password: ENC(tNfRJUthvYQR990TzW
314nXU+5jWBuYBDs5AgT5qG7g=)
Batch Database User ID: SPLADMV2
Batch Database Password: ENC(L5BXr/lXp/riShr9Lp
kFDsgUIjDm5I6TJU5Suz0Wy/k=)
JDBC Database User ID: SPLADMV2
JDBC Database Password: {3DES}L43JfrbOrCtupkwm
4I/Adw==
Database Name: DEV1
Database Server: 01HW342889
Database Port: 1701
ONS Server Configuration:
Database Override Connection String:
Oracle Client Character Set NLS_LANG: AMERICAN_AMERICA.UTF8
5. General Configuration Options
Batch RMI Port: 6509
Batch Mode: CLUSTERED
Coherence Cluster Name: OUBICLUSTER1
Coherence Cluster Address: 172.25.138.45
Coherence Cluster PORT: 6508
Coherence Cluster Mode: dev
Each item in the above list should be configured for a successful install.
Choose option (1,2,3,4,5, <P> Process, <X> Exit): P
--> Calculating additional variables ... done.
--> Writing variables to E:\OUBI2\ouaf\temp\FW.V4.0.2\tmp\2011-06-10-0954\ENVIRO
N.INI ... done.
Can't open E:\OUBI2\ouaf\temp\FW.V4.0.2\install_FW_E:\OUBI2\ouaf\DEV01.log for o
utput at E:\OUBI2\ouaf\temp\FW.V4.0.2\data\bin\perllib/SPL/splLog.pm line 190.
"ERROR - Detected while running install.plx."
Thks,
Mohan

This is a common error people get when configuring Repository Service in Admin Console...
Main reason for this is that there is an incompatible bit versions of Oracle Database and Informatica Server and windows. Try to reinstall Oracle DB or Infa Server and tryconfiguring the same it will work
Or it could be parameter issues if it is linux...
Please mark helpful this post

Error while configuring talent profile for ESS

Dear Experts
I am having following error while configuring talent profile for ESS:
The URL http://pplkhidr05.ppl.com.pk:8000/sap/bc/webdynpro/sap/hrtmc_employee_profile was not called due to an error.
Note
The following error text was processed in the system TRG : Access via 'NULL' object reference not possible.
The error occurred on the application server PPLKHIDR05_TRG_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: GET_PLVAR of program /1BCWDY/81IYQOEI3SKMOOB9TXW5==CP
Method: IWCI_HRTMC_TP_SHARED_DATA~GET_PLVAR of program /1BCWDY/81IYQOEI3SKMOOB9TXW5==CP
Method: OVERRIDE_EVENT_OIF of program /1BCWDY/828X5HC99194NVUUKJ30==CP
Method: IWCI_IF_FPM_OIF_CONF_EXIT~OVERRIDE_EVENT_OIF of program /1BCWDY/828X5HC99194NVUUKJ30==CP
Method: GET_UIBBS_FOR_EVENT of program /1BCWDY/7V06LYNNPH3D2G2T1W0Z==CP
Method: IWCI_IF_FPM_FLOORPLAN_COMP~GET_UIBBS_FOR_EVENT of program /1BCWDY/7V06LYNNPH3D2G2T1W0Z==CP
Method: IF_FPM_FLOORPLAN~GET_UIBBS_FOR_EVENT of program CL_FPM_OIF_INTERNAL===========CP
Method: GET_NEXT_UIBBS of program CL_FPM========================CP
Method: PROCESS_EVENT of program CL_FPM========================CP
Method: RUN_EVENT_LOOP of program CL_FPM========================CP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system TRG in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server PPLKHIDR05_TRG_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server PPLKHIDR05_TRG_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Any suggestions on how to resolve the error?
Regards
Imran

Imran,
check this thread
http://forums.sdn.sap.com/click.jspa?searchID=43957204&messageID=8996092
Thanks
Bala Duvvuri

Error while configuring SNC(secure network connection) ( SAP JCo 3.0.5)

Similar Messages

Maybe you are looking for