Error while configuring the database

Hello all-
I have installed Oracle 11G and i am trying to create a Database via Database Configuration Assistant & i get following Error:
May 17, 2010 2:22:55 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM Configuration Assistant again .
Refer to the log file at C:\app\admin\cfgtoollogs\dbca\FOUNDATION\emConfig.log for more details.
May 17, 2010 2:22:55 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM Configuration Assistant again .
     at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:3245)
     at oracle.sysman.emcp.EMReposConfig.unlockMGMTAccount(EMReposConfig.java:1001)
     at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:346)
     at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:158)
     at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:253)
     at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:583)
     at oracle.sysman.assistants.util.em.EMConfigStep.executeImpl(EMConfigStep.java:139)
     at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
     at oracle.sysman.assistants.util.step.BasicStep.callStep(BasicStep.java:251)
     at oracle.sysman.assistants.dbca.backend.PostDBConfigureStep.executeImpl(PostDBConfigureStep.java:269)
     at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
     at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
     at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2667)
     at java.lang.Thread.run(Thread.java:595)
May 17, 2010 2:22:55 PM oracle.sysman.emcp.EMConfig restoreOuiLoc
CONFIG: Restoring oracle.installer.oui_loc to C:\app\admin\product\11.2.0\dbhome_1\oui
I have seen the service for the Listener its up & running. Is there something that i shud do to register the database service with listener.
Any help would be appreciated.
Thanks!

Hello,
As previously posted you don't have to download Netca or Net Manager.
However, you may find on the links below an introduction to these tools:
http://www.orafaq.com/wiki/NetCA
http://www.orafaq.com/wiki/Net_Manager
Hope this help.
Best regards,
Jean-Valentin

Similar Messages

Error while configuring the database connection in sharepoint configuration wizard.Sharepoint 2007.

System
Provider
[ Name]
SharePoint
Products and Technologies Configuration
Wizard
EventID
104
[ Qualifiers]
0
Level
2
Task
0
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2014-11-06T02:03:00.000Z
EventRecordID
11054
Channel
Application
Computer
HZNTPMSWSMOS001.NEO-DIAGEO.com
Security
EventData
Failed
to create the configuration database. An exception of type
System.SystemException was thrown. Additional exception information: The trust
relationship between this workstation and the primary domain failed.
System.SystemException: The trust relationship between this workstation and the
primary domain failed. at
System.Security.Principal.NTAccount.TranslateToSids(IdentityReferenceCollection
sourceAccounts, Boolean& someFailed) at
System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection
sourceAccounts, Type targetType, Boolean forceSuccess) at
System.Security.Principal.NTAccount.Translate(Type targetType) at
Microsoft.SharePoint.Administration.SPProcessIdentity.GetMachineRelativeSecurityIdentifier(SPServer
server, Boolean& isMachineAccount) at
Microsoft.SharePoint.Administration.SPProcessIdentity.GrantIdentityAccessToDatabase(SPProcessIdentity
identity, SPDatabase database) at
Microsoft.SharePoint.Administration.SPProcessIdentity.GrantIdentityDatabaseAccess()
at Microsoft.SharePoint.Administration.SPProcessIdentity.Update() at
Microsoft.SharePoint.Administration.SPWindowsService.Update() at
Microsoft.SharePoint.Administration.SPFarm.CreateBasicServices(SqlConnectionStringBuilder
administrationContentDatabase, IdentityType identityType, String farmUser,
SecureString farmPassword) at
Microsoft.SharePoint.Administration.SPFarm.Create(SqlConnectionStringBuilder
configurationDatabase, SqlConnectionStringBuilder administrationContentDatabase,
IdentityType identityType, String farmUser, SecureString farmPassword) at
Microsoft.SharePoint.Administration.SPFarm.Create(SqlConnectionStringBuilder
configurationDatabase, SqlConnectionStringBuilder administrationContentDatabase,
String farmUser, SecureString farmPassword) at
Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.CreateOrConnectConfigDb()
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.Run()
at
Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()

Hi,
This issue seems to be a machine Issue. From message is seems that your Computer is not properly connected to Domain. use the steps in the below link and try doing your steps again.
https://support.microsoft.com/kb/162797?wa=wsignin1.0
Regards

Error while opening the database.--urgent---pls help...

Hi,
Got the below error while opening the database.
Database version is :10.1.0.4.0
database is in noarchive log mode.
the database is coming in to no-mount state and mount state quite easily but not able to open the database.
Got the below error while opening the database.
ORA-00600: internal error code, arguments: [4194], [37], [31], [], [], [], [], []
ORA-00600: internal error code, arguments: [4194], [37], [31], [], [], [], [], []
Mon Sep 29 15:32:39 2008
Errors in file /xxx/udump/aaa_ora_18737.trc:
ORA-00600: internal error code, arguments: [4194], [37], [31], [], [], [], [], []
ORA-00600: internal error code, arguments: [4194], [37], [31], [], [], [], [], []
Mon Sep 29 15:32:41 2008
DEBUG: Replaying xcb 0xc0000000350c1c18, pmd 0xc0000000353b21f0 for failed op 8
Doing block recovery for file 2 block 9483
No block recovery was needed.
on Sep 29 15:34:01 2008
Errors in file /xxx/udump/aaa/bdump/aaa_pmon_18723.trc:
ORA-00600: internal error code, arguments: [4194], [37], [31], [], [], [], [], []
Mon Sep 29 15:34:04 2008
Errors in file /xxx/udump/aaa/bdump/aaa_pmon_18723.trc:
ORA-00600: internal error code, arguments: [4194], [37], [31], [], [], [], [], []
PMON: terminating instance due to error 472
Instance terminated by PMON, pid = 18723
Please help me....................

Hi..
This ORA-600 refers to a mismatch has been detected between Redo records and rollback (Undo) records.Is better to lock a call with oracle support.Secondly, apply latest patch on the DB.
I had expereiced the same error, but my DB was in open mode, so i created a new undo tablespace and changed the undo_tablespace parameter and it worked.
Anand

Error while Registering the Database with Catalog..

I m creating recovery catalog in same database, and getting the errors.
1. I have created TOOLS tablespace
2.CREATE USER RMAN2
SQL> CREATE USER rman IDENTIFIED BY cat
2 TEMPORARY TABLESPACE temp
3 DEFAULT TABLESPACE tools
4 QUOTA UNLIMITED ON tools;
CREATE USER rman IDENTIFIED BY cat
ERROR at line 1:
ORA-01920: user name 'RMAN' conflicts with another user or role name
SQL> ed
Wrote file afiedt.buf
1 CREATE USER rman2 IDENTIFIED BY cat
2 TEMPORARY TABLESPACE temp
3 DEFAULT TABLESPACE tools
4* QUOTA UNLIMITED ON tools
SQL> /
User created.
3. GRANT RECOVERY_CATALOG_OWNER
SQL> GRANT RECOVERY_CATALOG_OWNER TO rman2;
Grant succeeded.
4. To create the recovery catalog:
1. Connect to the database that will contain the catalog as the catalog owner.
H:\>rman catalog rman2/cat@rock
Recovery Manager: Release 10.2.0.1.0 - Production on Fri Sep 5 10:45:52 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to recovery catalog database
2. Run the CREATE CATALOG command to create the catalog.
RMAN> CREATE CATALOG;
recovery catalog created
3. Optionally, start SQL*Plus and query the recovery catalog to see which tables were created:
H:\>sqlplus
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Sep 5 11:53:36 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter user-name: rman2/cat
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> select count(*) from cat;
COUNT(*)
91
SQL> ed
Wrote file afiedt.buf
1 select owner, table_name, tablespace_name
2 from dba_tables
3* where table_name='DB'
SQL> /
OWNER TABLE_NAME
TABLESPACE_NAME
RMAN2 DB
TOOLS
RMAN DB
ABAMCO_TEST
Next step is to registering the Database in the Recovery Catalog.
Registering a Database in the Recovery Catalog
H:\>rman TARGET / CATALOG rman2/cat@rock
Recovery Manager: Release 10.2.0.1.0 - Production on Fri Sep 5 11:56:09 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04005: error from target database:
ORA-01031: insufficient privileges
I m getting above error while registering the Database with Catalog,
Can anybody help me how can I register the Database with Catalog.????
Waiting for Reply!!!!!!!

Dear Manoj I can log in at TARGET Database.
H:\>rman
Recovery Manager: Release 10.2.0.1.0 - Production on Fri Sep 5 12:41:59 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN> connect target sys/rock
connected to target database: ROCK (DBID=3255117147)
RMAN>
============================================================
USING CONNECT STRING as you said.
H:\>rman target "sys/rock@rock as sysdba" catalog rman2/cat@rock
Argument Value Description
target quoted-string connect-string for target database
catalog quoted-string connect-string for recovery catalog
nocatalog none if specified, then no recovery catalog
cmdfile quoted-string name of input command file
log quoted-string name of output message log file
trace quoted-string name of output debugging message log file
append none if specified, log is opened in append mode
debug optional-args activate debugging
msgno none show RMAN-nnnn prefix for all messages
send quoted-string send a command to the media manager
pipe string building block for pipe names
timeout integer number of seconds to wait for pipe input
checksyntax none check the command file for syntax errors
Both single and double quotes (' or ") are accepted for a quoted-string.
Quotes are not required unless the string contains embedded white-space.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00552: syntax error in command line arguments
RMAN-01009: syntax error: found "as": expecting one of: "append, at, auxiliary, catalog, cmdfile, clone, checksyntax, debug, log, msglog, mask, msgno, nocatalog, pipe, rcvcat, script, slaxdebug, send, target, timeout, trace"
RMAN-01007: at line 0 column 16 file: command line arguments
H:\>rman
It didnt work either.
I have only one database rock, and created recovery catalog in it. I want to register rock database with recovery catalog.

Error while starting the Database

Hi,
I am getting the following error while starting the Database instance.
ORA-03113: end-of-file on communication channel.
How to fix this issue? i tried some of the options mentioned in docs in metalink. But still i am not able to fix.
Anypointers on this is appreciated.
Thanks & Regards,
Srikanth

Can you paste lines from alertlog file..

Windows 8.1 Hyper-V - Error while configuring the hard disk 0xC03A0014

Hello. I have just enabled Hyper-V on my Windows 8.1 laptop.
Dell Latitude E7440 i7-4600U @ 2.10GHz
I can create a Virtual-Switch but I am unable to create a new Hard Disk or Virtual Machine within Hyper-V. I get the same error for both processes.
Error: The Virtual Machine Management Service encountered an error while configuring the hard disk on virtual machine New Virtual Machine.
Failed to create the virtual hard disk.
The system failed to create C:\Users\user\Documents\Test\New.vhdx .
Failed to create the virtual hard disk
The system failed to create C:\Users\user\Documents\Test\New.vhdx . A Virtual disk support provider for the specified file was not found. (0xC03A0014).
I have ran all Dell Client System updates and all of windows updates.
I have attempted to create a virtual machine on the current SSD and also an external drive. The same error appears.
I have also attempted to create a virtual hard disk via Hyper-v with a Base vhdx, still the same error occurs. I've tested the base image on other laptops of the same model and windows 8.1 without issue.
Any thoughts on how I can fix this?
Thank you,
-Jake

Hi Jake,
"Enable Data Execution Protection (DEP) in the BIOS and make sure the Format of drive file system is not fat32.
1. Uninstall Intel Active System Monitor 3.0, if installed.
2. Disable "Intel IPMI Service" and "Intel Monitoring Agent" Service.
3. Open regedit and locate: HKLM\System\CurrentControlSet\Services\imbdrv.
4. Change the Start Key to 4 (Disabled).
5. Locate HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E97D-E325-11CE-BFC1-0 8002BE10318}.
6. Take ownership of the ‘Properties’ key.
7. Give yourself full permission for this key.
8. Now locate the properties key; if you see a ‘Security’ entry there, that is your problem. Delete this key.
9. Try attaching or adding the VHD again after rebooting.
If above steps did not help, add the Network Service account to Local Administrator group."
It is quoted from the similar thread below :
http://social.technet.microsoft.com/Forums/windows/en-US/55085ff3-0f26-41bd-b590-bb3490e2d6f5/win-7-professional-a-virtual-disk-support-provider-for-the-specified-file-was-not-found?forum=w7itprovirt
Hope it helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Hyper-V encountered an error while Configuring the network on Vmachine

Hi all,
i am novice in window server 201, I learning from a ebook.While i doing the step of creating virtual machine , i got this error
Hyper-V encountered an error while configuring the network on Vmachine
Hyper-V encountered an error trying to access an object on computer 'localhost' because the object was not found. The object might have been deleted, or you might not have permission to perform the task. Verify that the virtual Machine Management service
on the computer is running. If the service is running,try to perform the task again by using Run as Administrator

Windows Server 201? Are you sure?
What sort of machine are you trying to install and run Hyper-V on? What OS is it running?
Bill

Error While Configuring the Shared Service with Active Directory

Hi All,
I am getting a error while configuring MSAD with Shared Service, when entering the User Id and password and clicking next, the following error is displayed:
"EPMCSS-05180:Failed to validate Security configuration. Failed to connect. Invalid values for Base DN, User DN or Password. Enter valid value(s). Root Cause : [LDAP: error code 49 - 80090308: LdapErr: DSID-0C0903A9, comment: AcceptSecurityContext error, data 52e, v1db1]"
The AD user has the read access to the all users and group in Active Directory. If I use an Active Directory user with Admin privilege, It is getting connected.
But client is not ready to provide the Admin Access due to their internal policy and I also don't have any document which says admin privilege is required. According to the document,the user should have the following privileges only.
"The distinguished name of the user that Shared Services should use to bind with the user directory. This user must have search privilege on the RDN attribute within the DN. For example, in the dn: cn=John Doe, ou=people, dc=myCompany, dc=com, the bind user should have search access to the cn attribute.Special characters in User DN must be specified using escape characters. See “Using Special Characters” on page 46 for restrictions.
Example: cn=admin,dc=myCompany,dc=com
But I am getting confused with the statement "This user must have search privilege on the RDN attribute within the DN". Is it not search privillege?
Can anybody help me with required privilege for Active Directory user to configure with Shared Service.
Thanks in Advance,
Sunil

Thank you All,
i tried connecting using AD Browser from Microsoft, and it went in properly. then i found out that the AD Team here were giving a Wrong Credentials to connect, they Gave me HYP_OID which infact turned out to be a Principal name instead of a 'cn'.
after searching in the AD Browser i found the correct cn which is "Hyperion OID", then it went to the second Screen where now i am trying to search for the Users based on thier Job Nature.
Thank you for all the Support Guys, you both "Celvin" and "John" are the Top Guys under my Search list for any technical Assistance.
Thank you once again Friends....
Regards,
Sunil...
Shantan....

Error while starting the database in asm

Hi,
I am getting an error while at the time of starting the instance in asm enviornment.
ORA-00202: control file: '+DG_GROUP1/poldev01/controlfile/current.260.743010027'
ORA-17503: ksfdopn:2 Failed to open file +DG_GROUP1/poldev01/controlfile/current.260.743010027
ORA-15001: diskgroup "DG_GROUP1" does not exist or is not mounted
ORA-15055: unable to connect to ASM instance
ORA-01031: insufficient privileges
Kindly help.

Hi,
Can you check with the Permissions
ORA-15055: unable to connect to ASM instanceORA-01031: insufficient privileges>
Anand

Error while configuring the domain "Configure JDBC Component Schema"

Hi Everyone,
I have installed SOA Suite 11g on my Win 7 machine 64bit OS and while trying to configure the domain for the WebLogic Server. I fallowed the wizard and everything went well till the JDBC Component Schema window. Here I am able to pass through
1. BAM Schema- Failed
2. SOA Infrastructure-Failed
3. User Messaging Service-Passed
4. OWSM MDS Schema-Passed
5. SOA MDS Schema-Passed
and here is the error that i am facing...
Component Schema=BAM Schema
Driver=oracle.jdbc.OracleDriver
URL=jdbc:oracle:thin:@localhost:1521/XE
User=DEV_ORABAM
Password=*******
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='BAM' and version='11.1.1.2.0'
CFGFWK-60850: Test Failed!
CFGFWK-60853: A connection was established to the database but no rows were returned from the test SQL statement.
Component Schema=SOA Infrastructure
Driver=oracle.jdbc.xa.client.OracleXADataSource
URL=jdbc:oracle:thin:@localhost:1521/XE
User=DEV_SOAINFRA
Password=*******
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='SOAINFRA' and version='11.1.1.2.0'
CFGFWK-60850: Test Failed!
CFGFWK-60853: A connection was established to the database but no rows were returned from the test SQL statement.
I googled the error and tried to check whether the Schema_version_registry has any rows are not and initially i don't have any and then I have created table named "Schema_version_registry" and then inserted the values accordingly..
CREATE TABLE schema_version_registry(owner VARCHAR2(30), mr_type VARCHAR2(10), version VARCHAR2(50));
INSERT INTO schema_version_registry(owner, mr_type, version) VALUES ('DEV_SOAINFRA','MDS','11.1.1.2.0');
similarly i did for the DEV_ORABAM but there is no use...........
I am struck at this position can any please help me out........... please..
Thanks in advance
Sorry Guys.. I understood my mistake and change the "mr-type" accordingly... it is successful now..
Thanks if anyone tried to answer it.......
Edited by: user10763276 on Oct 10, 2010 5:11 PM

Hi can anyone please help me ...all the jdbc component schema is failing for me while creating domain.
please find the log.
Component Schema=SOA Infrastructure
Driver=oracle.jdbc.xa.client.OracleXADataSource
URL=jdbc:oracle:thin:@localhost:1521/XE
User=sys as sysdba
Password=*********
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='SOAINFRA' and version='11.1.1.5.0'
CFGFWK-60850: Test Failed!
CFGFWK-60853: A connection was established to the database but no rows were returned from the test SQL statement.
Component Schema=User Messaging Service
Driver=oracle.jdbc.OracleDriver
URL=jdbc:oracle:thin:@localhost:1521/XE
User=sys as sysdba
Password=*********
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='ORASDPM' and version='11.1.1.2.0'
CFGFWK-60850: Test Failed!
CFGFWK-60853: A connection was established to the database but no rows were returned from the test SQL statement.
Component Schema=OWSM MDS Schema
Driver=oracle.jdbc.OracleDriver
URL=jdbc:oracle:thin:@localhost:1521/XE
User=sys as sysdba
Password=*********
SQL Test=select 1 from schema_version_registry where
owner=(select user from dual) and mr_type='MDS' and
version='11.1.1.5.0'
CFGFWK-60850: Test Failed!
CFGFWK-60853: A connection was established to the database but no rows were returned from the test SQL statement.
Component Schema=SOA MDS Schema
Driver=oracle.jdbc.OracleDriver
URL=jdbc:oracle:thin:@localhost:1521/XE
User=sys as sysdba
Password=*********
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='MDS' and version='11.1.1.5.0'
CFGFWK-60850: Test Failed!
CFGFWK-60853: A connection was established to the database but no rows were returned from the test SQL statement.
"

Error while importing the database of Oracle 10.2g to MaxDB - DB Migration

Hi,
We are testing the data migration from Oracle 10.2g to MaxDB 7.6. First i have exported the oracle database without any errors. But while importing to MaxDB i am getting error as below,
tail -f ImportMonitor.console.log
java.class.version = 49.0
java.home = /opt/java1.5/jre
java.ext.dirs = /opt/java1.5/jre/lib/ext
java.class.path = migmon.jar
java.library.path = /opt/java1.5/jre/lib/PA_RISC2.0W:/opt/java1.5/jre/lib/PA_RISC2.0W/server:/opt/java1.5/jre/../lib/PA_RISC2.0W:/tmp/sapinst_exe.18812.1291025270:/usr/sap/BE1/SYS/exe/run:/sapdb/programs/lib/lib64:/usr/lib
java.io.tmpdir = /var/tmp/
Import Monitor jobs: running 1, waiting 1, completed 72, failed 0, total 74.
Loading of 'SAPAPPL1_11' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 72, failed 1, total 74.
And tail -f SAPAPPL1_11.log
(IMP) ERROR: DbSlExeModify/DbSlLobPutPiece failed
rc = 26, table "VBRK"
ERROR : Prepare/modify for GetPages failed(dbrc=26).
(SQL error 0)
error message returned by DbSl:
(DB) ERROR: DDL statement failed
(CREATE TABLE "VBRL" ( "MANDT" VARCHAR2(3) UNICODE DEFAULT '000' NOT NULL , "VBELN" VARCHAR2(10) UNICODE DEFAULT ' ' NOT NULL , "POSNR" VARCHAR2(6) UNICODE DEFAULT '000000' NOT NULL , "VBELN_VF" VARCHAR2(10) UNICODE DEFAULT ' ' NOT NULL , "NETWR" NUMBER(15,2) DEFAULT 0 NOT NULL , "MWSBP" NUMBER(13,2) DEFAULT 0 NOT NULL , "KWERT_RL" NUMBER(13,2) DEFAULT 0 NOT NULL , "MWSBP_RL" NUMBER(13,2) DEFAULT 0 NOT NULL , "KUNAG" VARCHAR2(10) UNICODE DEFAULT ' ' NOT NULL , "UVPRS" VARCHAR2(1) UNICODE DEFAULT ' ' NOT NULL , "LOGSYS" VARCHAR2(10) UNICODE DEFAULT ' ' NOT NULL ) NO FIXED LENGTH COLUMN )
DbSlExecute: rc = 102
(SQL error -955)
error message returned by DbSl:
I tried multiple time by modifying the loadArgs=-nolog -c 10000 -merge_bck . But still same error "(SQL error -955)"
Thanks,
Narendra

Hi,
it is not astonishing that the error occurs every time you try this create table statement.
A table with this name already exists. And error -955 tells us exactly this.
What to do?
As I do not know if there is data in this table and/or if there are views / other database objects
using this table, I cannot decide, if dropping this table would be a good idea.
But what I do not understand is, why during one (?) loading in a clean (?) database this
table is tried to create more than once. Or was the database you are loading into not clean,
fresh and empty? Then it will happen that not only this table, but some others will result in an error
because they exist already.
Elke

Error while installing the Database instance in SAP4.7 on Server2003

Hi All,
I am trying to install SAP4.7 in server2003 which is installed on VMWare. I have successfully installed SAP instance. Now while creating database instance; i have given all the required detials and check all the paramenters. But when i click to start creating the database i got the error messgae that database instance can not be installed. I have chekced the error log but could not find the resolution.
Please see the below error log and advice on what should be done.
=======================================
INFO 2010-10-10 03:58:07
Processing of host operation t_HostInfo_SHARED succeeded.
INFO 2010-10-10 03:58:14
The 'saploc' share exists at directory 'C:\usr\sap'. Choosing drive C: as SAP System drive.
INFO 2010-10-10 03:58:17
The 'saploc' share exists at directory 'C:\usr\sap'. Choosing drive C: as SAP System drive.
INFO 2010-10-10 04:02:33
Copying file C:/Documents and Settings/Administrator/Desktop/SAP/EXPORT_DB/disk1/EXPORT1/DB/ORA/DBSIZE.XML to: DBSIZE.XML.
INFO 2010-10-10 04:02:33
Creating file C:\SAPinst ORACLE SAPINST\DBSIZE.XML.
INFO 2010-10-10 04:02:33
Copying file system node C:\Documents and Settings\Administrator\Desktop\SAP\EXPORT_DB\disk1\EXPORT1/DB/ORA/DBSIZE.XML with type NODE to DBSIZE.XML succeeded.
INFO 2010-10-10 04:02:33
Processing of all file system node operations of table tORA_filecopy succeeded.
INFO 2010-10-10 04:02:34
Copying file C:/Documents and Settings/Administrator/Desktop/SAP/EXPORT_DB/disk1/EXPORT1/DB/DDLORA.TPL to: DDLORA.TPL.
INFO 2010-10-10 04:02:34
Creating file C:\SAPinst ORACLE SAPINST\DDLORA.TPL.
INFO 2010-10-10 04:02:34
Copying file system node C:\Documents and Settings\Administrator\Desktop\SAP\EXPORT_DB\disk1\EXPORT1/DB/DDLORA.TPL with type NODE to DDLORA.TPL succeeded.
INFO 2010-10-10 04:02:34
Processing of all file system node operations of table tORA_filecopy succeeded.
INFO 2010-10-10 04:02:47
Moving file C:/SAPinst ORACLE SAPINST/DDLORA.TPL to: orig_ddl_ora_tmp.tpl.
INFO 2010-10-10 04:02:47
Moving file C:/SAPinst ORACLE SAPINST/changed_ddl_ora_tmp.tpl to: DDLORA.TPL.
INFO 2010-10-10 04:02:47
Removing file C:/SAPinst ORACLE SAPINST/orig_ddl_ora_tmp.tpl.
ERROR 2010-10-10 04:03:27
MSC-01003 ESyException: ESAPinstException: error text undefined
ERROR 2010-10-10 04:03:27
FJS-00012 Error when executing script.
ERROR 2010-10-10 04:03:27
FCO-00011 The step fillR3loadPackageTable with step key SAPSYSTEM|ind|ind|ind|ind|ind|0|SAPComponent|ind|ind|ind|ind|ind|0|DatabaseLoad|ind|ind|ind|ind|ind|0|fillR3loadPackageTable executed with status ERROR.
ERROR 2010-10-10 04:03:27
FSL-02015 Node C:\SAPinst ORACLE SAPINST\and\DATA does not exist.
=======================================
Many thanks in advance.
Regards,
Anuj Jaglan

Hi Rajesh,
Thanks for you reply. I have removed the space with (_) from the folder's name. But still it is throwing the same error. See the below error log.
===============
Moving file C:/SAPinst_ORACLE_SAPINST/changed_ddl_ora_tmp.tpl to: DDLORA.TPL.
INFO 2010-10-10 20:32:16
Removing file C:/SAPinst_ORACLE_SAPINST/orig_ddl_ora_tmp.tpl.
ERROR 2010-10-10 20:33:06
MSC-01003 ESyException: ESAPinstException: error text undefined
ERROR 2010-10-10 20:33:06
FJS-00012 Error when executing script.
ERROR 2010-10-10 20:33:06
FCO-00011 The step fillR3loadPackageTable with step key SAPSYSTEM|ind|ind|ind|ind|ind|0|SAPComponent|ind|ind|ind|ind|ind|0|DatabaseLoad|ind|ind|ind|ind|ind|0|fillR3loadPackageTable executed with status ERROR.
ERROR 2010-10-10 20:33:06
FSL-02015 Node C:\SAPinst_ORACLE_SAPINST\and\DATA does not exist.
==================
Also let me know if this could be the reason of less space on hard disk or I am installing SAP on the same drive on which server is installed.
Regards,
Anuj Jaglan

Paraller Query Server Error while creating the database using DBCA on UNIX

Hi All,
I am try to create the database on UNIX PLATFORM database 11g R1.
At the end of database creation using DBCA i got the errors:
ORA-12801:error signaled in parallel query server P077
ORA-00018: maximun number of sessions exceeded
ORA-06512:at"SYS.UTL_RECOMP",line 760
ORA-06512:at"SYS.UTL_RECOMP",line 773
ORA-06512:at line 1
Please suggest what can i do to remove this issue.
Regards
Girish Sharma

user12104101 wrote:
Hi All,
I am try to create the database on UNIX PLATFORM database 11g R1.
At the end of database creation using DBCA i got the errors:
ORA-12801:error signaled in parallel query server P077
ORA-00018: maximun number of sessions exceeded
ORA-06512:at"SYS.UTL_RECOMP",line 760
ORA-06512:at"SYS.UTL_RECOMP",line 773
ORA-06512:at line 1
Please suggest what can i do to remove this issue.
Regards
Girish SharmaIncrease value of SESSIONS(also processes) parameter as
sqlplus "/as sysdba"
show parameter sessions
alter system set sessions =<new big value> scope=spfile;
shutdown immediate;
startup;

Regardig error while updating the database table

hi experts,
   i m trying to update the database table from the values containig in my internal table ,,,but the system is giving this error plz help me::::
The type of the database table and work area (or internal table)
"ITAB_UPDATE" are not Unicode convertible. Unicode convertible.
my internal table name itab_update and the database table name yitab.i m using this statement::
    modify yitab from itab_update.

Hi
1. You have to Declare the Itab with the same structure as DB table.
2. Use the statement
    Modify <DBtable> from TABLE <itab>.
or
   Update <DBtable> from TABLE <itab>.
Hope this will solve.
Reward .....if so.
Regards.

ORA-03113: Error while upgrading the Database from 11.1.0.6 to 11.1.0.7

Hi,
I am trying to upgrade the database from 11.1.0.6 to 11.1.0.7 on OEL operating system.
After applying the patch "6890831" when trying to start the database using "Startup Upgrade" command I am getting the below error.
ORA-03113: end-of-file on communication channel
Process ID: 20826
Session ID: 170 Serial number: 3
I am getting the same error when trying to create the new database using "DBCA".
Please provide me the probable outcomes.
Thanks
Amith

Below entries found in alert_orcl.log file
MMNL started with pid=15, OS id=20571
starting up 1 shared server(s) ...
ORACLE_BASE from environment = /u01/app/oracle
Thu Dec 03 20:11:11 2009
ALTER DATABASE MOUNT
Errors in file /u01/app/oracle/diag/rdbms/orcl/orcl/trace/orcl_mman_20557.trc:
ORA-27103: internal error
Linux-x86_64 Error: 11: Resource temporarily unavailable
Additional information: -1
Additional information: 1
MMAN (ospid: 20557): terminating the instance due to error 27103
Instance terminated by MMAN, pid = 20557
Below entries found in the Trace file generated
error 27103 detected in background process
ORA-27103: internal error
Linux-x86_64 Error: 11: Resource temporarily unavailable
Additional information: -1
Additional information: 1
*** 2009-12-03 20:11:14.727
MMAN (ospid: 20557): terminating the instance due to error 27103

Error while configuring the database

Similar Messages

Maybe you are looking for