Error while configuring the People Soft adapter with ESB

Hi All,
We are intergarting PeopleSoft application using ESB ver 10.1.3.1
I have been following the Oracle Application Server Adapter for People Soft User's Guide.
The following are the steps covered.
1. Basic installation of the SOA Suite done (On the windows machine)
2.Packaged application adapters installed.
3. Post installation tasks carried out
a Installed Patch 5895585
b Library files copied(psjoa.jar from the target peoplesoft application server)
c.BSE deployment verification done.
d we would be using the file repository for BSE
Then I created a configuration for BSE (creating a new configuration )
And then I can see all the 3 nodes -Adapters,Events and Business Services.
But when I click on the adapters node I do not see any adapters and I get the following error:
"This application has failed to start because iwsiebel.core.dll was not found.Re-installing the application may fix this problem"
I have done the installation again but still getting the same error.
I checked and the above dll is present at the following location :
<Oracle_Home>\adapters\application\lib
<Oracle_Home>\j2ee\<oc4j_container>\connectors\jca-app-adapter\jca-app-adapter
Any pointers or suggestion on how I can overcome or resolve this issue..??
Thanks & Regards,
Shilpa

Hi All,
Any pointers or direction to resolve this issue would really be helpful... ?
Thanks &Regards,
Shilpa

Similar Messages

  • Windows 8.1 Hyper-V - Error while configuring the hard disk 0xC03A0014

    Hello. I have just enabled Hyper-V on my Windows 8.1 laptop.
    Dell Latitude E7440 i7-4600U @ 2.10GHz
    I can create a Virtual-Switch but I am unable to create a new Hard Disk or Virtual Machine within Hyper-V. I get the same error for both processes.
    Error: The Virtual Machine Management Service encountered an error while configuring the hard disk on virtual machine New Virtual Machine.
    Failed to create the virtual hard disk.
    The system failed to create C:\Users\user\Documents\Test\New.vhdx .
    Failed to create the virtual hard disk
    The system failed to create C:\Users\user\Documents\Test\New.vhdx . A Virtual disk support provider for the specified file was not found. (0xC03A0014).
    I have ran all Dell Client System updates and all of windows updates.
    I have attempted to create a virtual machine on the current SSD and also an external drive. The same error appears.
    I have also attempted to create a virtual hard disk via Hyper-v with a Base vhdx, still the same error occurs. I've tested the base image on other laptops of the same model and windows 8.1 without issue.
    Any thoughts on how I can fix this?
    Thank you,
    -Jake

    Hi Jake,
    "Enable Data Execution Protection (DEP) in the BIOS and make sure the Format of drive file system is not fat32.
    1. Uninstall Intel Active System Monitor 3.0, if installed.
    2. Disable "Intel IPMI Service" and "Intel Monitoring Agent" Service.
    3. Open regedit and locate: HKLM\System\CurrentControlSet\Services\imbdrv.
    4. Change the Start Key to 4 (Disabled).
    5. Locate HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E97D-E325-11CE-BFC1-0 8002BE10318}.
    6. Take ownership of the ‘Properties’ key.
    7. Give yourself full permission for this key.
    8. Now locate the properties key; if you see a ‘Security’ entry there, that is your problem. Delete this key.
    9. Try attaching or adding the VHD again after rebooting.
    If above steps did not help, add the Network Service account to Local Administrator group."
    It is quoted from the similar thread below :
    http://social.technet.microsoft.com/Forums/windows/en-US/55085ff3-0f26-41bd-b590-bb3490e2d6f5/win-7-professional-a-virtual-disk-support-provider-for-the-specified-file-was-not-found?forum=w7itprovirt
    Hope it helps
    Best Regards
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Hyper-V encountered an error while Configuring the network on Vmachine

    Hi all,
    i am novice in window server 201, I learning from a ebook.While i doing the step of creating virtual machine , i got this error
    Hyper-V encountered an error while configuring the network on Vmachine 
    Hyper-V encountered an error trying to access an object on computer 'localhost' because the object was not found. The object might have been deleted, or you might not have permission to perform the task. Verify that the virtual Machine Management service
    on the computer is running. If the service is running,try to perform the task again by using Run as Administrator

    Windows Server 201? Are you sure?
       What sort of machine are you trying to install and run Hyper-V on? What OS is it running?
    Bill

  • Error While Configuring the Shared Service with Active Directory

    Hi All,
    I am getting a error while configuring MSAD with Shared Service, when entering the User Id and password and clicking next, the following error is displayed:
    "EPMCSS-05180:Failed to validate Security configuration. Failed to connect. Invalid values for Base DN, User DN or Password. Enter valid value(s). Root Cause : [LDAP: error code 49 - 80090308: LdapErr: DSID-0C0903A9, comment: AcceptSecurityContext error, data 52e, v1db1]"
    The AD user has the read access to the all users and group in Active Directory. If I use an Active Directory user with Admin privilege, It is getting connected.
    But client is not ready to provide the Admin Access due to their internal policy and I also don't have any document which says admin privilege is required. According to the document,the user should have the following privileges only.
    "The distinguished name of the user that Shared Services should use to bind with the user directory. This user must have search privilege on the RDN attribute within the DN. For example, in the dn: cn=John Doe, ou=people, dc=myCompany, dc=com, the bind user should have search access to the cn attribute.Special characters in User DN must be specified using escape characters. See “Using Special Characters” on page 46 for restrictions.
    Example: cn=admin,dc=myCompany,dc=com
    But I am getting confused with the statement "This user must have search privilege on the RDN attribute within the DN". Is it not search privillege?
    Can anybody help me with required privilege for Active Directory user to configure with Shared Service.
    Thanks in Advance,
    Sunil

    Thank you All,
    i tried connecting using AD Browser from Microsoft, and it went in properly. then i found out that the AD Team here were giving a Wrong Credentials to connect, they Gave me HYP_OID which infact turned out to be a Principal name instead of a 'cn'.
    after searching in the AD Browser i found the correct cn which is "Hyperion OID", then it went to the second Screen where now i am trying to search for the Users based on thier Job Nature.
    Thank you for all the Support Guys, you both "Celvin" and "John" are the Top Guys under my Search list for any technical Assistance.
    Thank you once again Friends....
    Regards,
    Sunil...
    Shantan....

  • Error while configuring external LDAP user store with weblogic

    Hi,
    I have weblogic 10.3 installed and I can access weblogic admin console using weblogic (admin) user. I want to use external ldap user store to access admin console with users present in external ldap.
    To do this, I have configured authentication provider and provided all the required details to connect to ldap.
    For example:
    Base DN: cn=admin,cn=Administrators,cn=dscc (user with which we will connect to LDAP)
    User DN: ou=People,dc=test,dc=com
    Group DN: ou=Groups,dc=test,dc=com
    This authentication provider is set to SUFFICIENT mode. I have deleted the default authentication provider.
    In the boot.properties file I have given the user name and password of the user with which LDAP instance was created something like below.
    password=xxxxxxx
    username=admin
    Now while starting the admin weblogic server, I am getting the below error:
    <Jul 25, 2012 2:22:28 PM IOT> <Critical> <Security> <BEA-090402> <Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.>
    <Jul 25, 2012 2:22:28 PM IOT> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
    weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:960)
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1054)
    at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
    at weblogic.security.SecurityService.start(SecurityService.java:141)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    Truncated. see log file for complete stacktrace
    Caused By: javax.security.auth.login.FailedLoginException: [Security:090304]Authentication Failed: User admin javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User admin denied
    at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:261)
    at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    Truncated. see log file for complete stacktrace
    >
    <Jul 25, 2012 2:22:28 PM IOT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
    <Jul 25, 2012 2:22:28 PM IOT> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
    <Jul 25, 2012 2:22:28 PM IOT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
    Can anyone please suggest how to resolve this problem? If, anyone can suggest the exact steps to configure external ldap store to manage admin console via ldap users.
    Regards,
    Neeraj Tati.

    Hi,
    Please refer the below content that I found for Oracle 11g in the docs.
    "If an LDAP Authentication provider is the only configured Authentication provider for a security realm, you must have the Admin role to boot WebLogic Server and use a user or group in the LDAP directory. Do one of the following in the LDAP directory:
    By default in WebLogic Server, the Admin role includes the Administrators group. Create an Administrators group in the LDAP directory, if one does not already exist. Make sure the LDAP user who will boot WebLogic Server is included in the group.
    The Active Directory LDAP directory has a default group called Administrators. Add the user who will be booting WebLogic Server to the Administrators group and define Group Base Distinguished Name (DN) so that the Administrators group is found.
    If you do not want to create an Administrators group in the LDAP directory (for example, because the LDAP directory uses the Administrators group for a different purpose), create a new group (or use an existing group) in the LDAP directory and include the user from which you want to boot WebLogic Server in that group. In the WebLogic Administration Console, assign that group the Admin role."
    Now in my LDAP directory, setup is in such a way that Administrators is a group created under following heirarchy " cn=Administrators,ou=Groups,dc=test,dc=com" and there is one user added in this Administrators group.
    The problem that I am having is when I modify the Admin role in which Administrators group should be added what exaclty I should give in Admin role. Whether I should give only Administrators or full DN: cn=Administrators,ou=Groups,dc=test,dc=com ???
    When i give full DN, it takes every attribute as different, i mean cn=Administrators as different and ou=Groups as different and shows a message that cn=Administrators does not exist.
    Here not sure what to do.
    Also if external ldap authentication provider is the only provider then I need to give the user information in boot.properties file also for weblogic to boot properly. Now, what should I give there in user? still complete DN ??
    Regards,
    Neeraj Tati.

  • Error while configuring the domain "Configure JDBC Component Schema"

    Hi Everyone,
    I have installed SOA Suite 11g on my Win 7 machine 64bit OS and while trying to configure the domain for the WebLogic Server. I fallowed the wizard and everything went well till the JDBC Component Schema window. Here I am able to pass through
    1. BAM Schema- Failed
    2. SOA Infrastructure-Failed
    3. User Messaging Service-Passed
    4. OWSM MDS Schema-Passed
    5. SOA MDS Schema-Passed
    and here is the error that i am facing...
    Component Schema=BAM Schema
    Driver=oracle.jdbc.OracleDriver
    URL=jdbc:oracle:thin:@localhost:1521/XE
    User=DEV_ORABAM
    Password=*******
    SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='BAM' and version='11.1.1.2.0'
    CFGFWK-60850: Test Failed!
    CFGFWK-60853: A connection was established to the database but no rows were returned from the test SQL statement.
    Component Schema=SOA Infrastructure
    Driver=oracle.jdbc.xa.client.OracleXADataSource
    URL=jdbc:oracle:thin:@localhost:1521/XE
    User=DEV_SOAINFRA
    Password=*******
    SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='SOAINFRA' and version='11.1.1.2.0'
    CFGFWK-60850: Test Failed!
    CFGFWK-60853: A connection was established to the database but no rows were returned from the test SQL statement.
    I googled the error and tried to check whether the Schema_version_registry has any rows are not and initially i don't have any and then I have created table named "Schema_version_registry" and then inserted the values accordingly..
    CREATE TABLE schema_version_registry(owner VARCHAR2(30), mr_type VARCHAR2(10), version VARCHAR2(50));
    INSERT INTO schema_version_registry(owner, mr_type, version) VALUES ('DEV_SOAINFRA','MDS','11.1.1.2.0');
    similarly i did for the DEV_ORABAM but there is no use...........
    I am struck at this position can any please help me out........... please..
    Thanks in advance
    Sorry Guys.. I understood my mistake and change the "mr-type" accordingly... it is successful now..
    Thanks if anyone tried to answer it.......
    Edited by: user10763276 on Oct 10, 2010 5:11 PM

    Hi can anyone please help me ...all the jdbc component schema is failing for me while creating domain.
    please find the log.
    Component Schema=SOA Infrastructure
    Driver=oracle.jdbc.xa.client.OracleXADataSource
    URL=jdbc:oracle:thin:@localhost:1521/XE
    User=sys as sysdba
    Password=*********
    SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='SOAINFRA' and version='11.1.1.5.0'
    CFGFWK-60850: Test Failed!
    CFGFWK-60853: A connection was established to the database but no rows were returned from the test SQL statement.
    Component Schema=User Messaging Service
    Driver=oracle.jdbc.OracleDriver
    URL=jdbc:oracle:thin:@localhost:1521/XE
    User=sys as sysdba
    Password=*********
    SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='ORASDPM' and version='11.1.1.2.0'
    CFGFWK-60850: Test Failed!
    CFGFWK-60853: A connection was established to the database but no rows were returned from the test SQL statement.
    Component Schema=OWSM MDS Schema
    Driver=oracle.jdbc.OracleDriver
    URL=jdbc:oracle:thin:@localhost:1521/XE
    User=sys as sysdba
    Password=*********
    SQL Test=select 1 from schema_version_registry where
                        owner=(select user from dual) and mr_type='MDS' and
                        version='11.1.1.5.0'
    CFGFWK-60850: Test Failed!
    CFGFWK-60853: A connection was established to the database but no rows were returned from the test SQL statement.
    Component Schema=SOA MDS Schema
    Driver=oracle.jdbc.OracleDriver
    URL=jdbc:oracle:thin:@localhost:1521/XE
    User=sys as sysdba
    Password=*********
    SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='MDS' and version='11.1.1.5.0'
    CFGFWK-60850: Test Failed!
    CFGFWK-60853: A connection was established to the database but no rows were returned from the test SQL statement.
    "

  • Error while configuring the ASM on linux

    i am trying to implement ASM of the virtual machine.. i downloaded the ASM libraries and packages and installed them as a "root" user using the following command:
    $>rpm -Uvh oracleasm*
    after the installtion was done i went to configure the library driver by executing the following command(also as a root user)
    $>/etc/init.d/oracleasm configure...
    i answered all the question given by the command and then the following error message occured..
    This will configure the on-boot properties of the Oracle ASM library
    driver. The following questions will determine whether the driver is
    loaded on boot and what permissions it will have. The current values
    will be shown in brackets ('[]'). Hitting <ENTER> without typing an
    answer will keep that current value. Ctrl-C will abort.
    Default user to own the driver interface [oracle]:
    Default group to own the driver interface [dba]:
    Start Oracle ASM library driver on boot (y/n) [y]:
    Fix permissions of Oracle ASM disks on boot (y/n) [y]:
    Writing Oracle ASM library driver configuration: [  OK  ]
    Loading module "oracleasm": Unable to load module "oracleasm"
    [FAILED]
    i don't have much experience with ASM to solve this problem, so if someone can help then i will appreciate it.
    NOTE: my platform is
    ORACLE10gR2(10.2.0.1)
    RHEL 4 update 5.

    i have been trying to delete the ASM library driver and install it again but i get this message everytime i do so..,
    [root@localhost RPMS]# rpm -ev oracleasm-2.6.9-55.0.0.0.2.EL-2.0.3-2.i686.rpm
    error: package oracleasm-2.6.9-55.0.0.0.2.EL-2.0.3-2.i686.rpm is not installed
    then i execute the following command to install it and the following appears.
    [root@localhost RPMS]# rpm -ivh oracleasm-2.6.9-55.0.0.0.2.EL-2.0.3-2.i686.rpm
    warning: oracleasm-2.6.9-55.0.0.0.2.EL-2.0.3-2.i686.rpm: V3 DSA signature: NOKEY, key ID b38a8516
    Preparing... ########################################### [100%]
    package oracleasm-2.6.9-55.0.0.0.2.EL-2.0.3-2 is already installed
    it is really weired,,,
    if someone have encountered this scenario then please explain this issue for me.

  • ERROR while uploading the data into ztable with background processing

    Hi gurus,
    i am trying to upload the data from excel file to internal table 
    its working fine ..
    but........
    if i try to upload the data with background processing , in sm37 it is saying "error during the upload of clipboard contents".
    Regards,
    Sri

    Hi,
    FM GUI_UPLOAD doesnt work in background, use dataset to upload it from application server.
    refer below code
    *--Local Variables
      DATA : l_file  TYPE string,
             l_line  TYPE string,
             l_index TYPE sy-tabix.
    *--Clear
      CLEAR : l_file.
      l_file = p_ipfile.
    *--Read the data from application server file.
      OPEN DATASET l_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
      IF sy-subrc NE 0.
    *--Error in opening file
        MESSAGE i368(00) WITH text-005.
      ENDIF.
    *--Get all the records from the specified location.
      DO.
        READ DATASET l_file INTO l_line.
        IF sy-subrc NE 0.
          EXIT.
        ELSE.
          SPLIT l_line AT cl_abap_char_utilities=>horizontal_tab
                          INTO st_ipfile-vbeln
                               st_ipfile-posnr
                               st_ipfile-edatu
                               st_ipfile-wmeng.
          APPEND st_ipfile TO it_ipfile.
        ENDIF.
      ENDDO.
    Regards,
    Prashant

  • Error while configuring the application server for ESB on Jdeveloper

    While i try to configure a application server connection on Jdeveloper for a remote installation of ESB (advanced mode with all the three components together and not in a cluster mode) i get the following error :
    Error getting OC4J Process for: opmn-home+oc4j-10.10.36.21-6003-default:
    Error connecting to OPMN (is it running?): Connection refused: connect
    All the OC4J processes are running on the server as i get the following output for the ./opmnctl status command :
    [oraclesoa@esboid2 bin]$ ./opmnctl status
    Processes in Instance: home.localhost.localdomain
    --------------------------------------------------------------+---------
    ias-component | process-type | pid | status
    --------------------------------------------------------------+---------
    OC4JGroup:default_group | OC4J:oc4j_soa | 10000 | Alive
    OC4JGroup:default_group | OC4J:home | 9999 | Alive
    ASG | ASG | N/A | Down
    HTTP_Server | HTTP_Server | 9998 | Alive
    The installation is on a Linux box.
    I give the following details in the connection properties box in Jdeveloper :
    host : 10.10.36.21
    opmn port : 6003
    oc4j instance : home
    Also the opmn port is correct :
    [oraclesoa@esboid2 bin]$ ./opmnctl status -port
    esboid2:6003
    Any ideas on this?
    Message was edited by:
    Nilay

    i tried with taht.....same error.......is this an issue with port 6003 on the server........it is a linux server and I cannot telnet to it......i can use SSH though.......how to know whether the opmn port(6003) is open or not?.....

  • Error while configuring the database

    Hello all-
    I have installed Oracle 11G and i am trying to create a Database via Database Configuration Assistant & i get following Error:
    May 17, 2010 2:22:55 PM oracle.sysman.emcp.EMConfig perform
    SEVERE: Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM Configuration Assistant again .
    Refer to the log file at C:\app\admin\cfgtoollogs\dbca\FOUNDATION\emConfig.log for more details.
    May 17, 2010 2:22:55 PM oracle.sysman.emcp.EMConfig perform
    CONFIG: Stack Trace:
    oracle.sysman.emcp.exception.EMConfigException: Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM Configuration Assistant again .
         at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:3245)
         at oracle.sysman.emcp.EMReposConfig.unlockMGMTAccount(EMReposConfig.java:1001)
         at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:346)
         at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:158)
         at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:253)
         at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:583)
         at oracle.sysman.assistants.util.em.EMConfigStep.executeImpl(EMConfigStep.java:139)
         at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
         at oracle.sysman.assistants.util.step.BasicStep.callStep(BasicStep.java:251)
         at oracle.sysman.assistants.dbca.backend.PostDBConfigureStep.executeImpl(PostDBConfigureStep.java:269)
         at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
         at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
         at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2667)
         at java.lang.Thread.run(Thread.java:595)
    May 17, 2010 2:22:55 PM oracle.sysman.emcp.EMConfig restoreOuiLoc
    CONFIG: Restoring oracle.installer.oui_loc to C:\app\admin\product\11.2.0\dbhome_1\oui
    I have seen the service for the Listener its up & running. Is there something that i shud do to register the database service with listener.
    Any help would be appreciated.
    Thanks!

    Hello,
    As previously posted you don't have to download Netca or Net Manager.
    However, you may find on the links below an introduction to these tools:
    http://www.orafaq.com/wiki/NetCA
    http://www.orafaq.com/wiki/Net_Manager
    Hope this help.
    Best regards,
    Jean-Valentin

  • Error while configuring the automatic payment

    Hi
    I configured  for the over and under payment. However whenever i try to to use the reason code i get an error . reason code with automatic charge off is not permitted here.I was using the Tcode F-28
      The diagnosis says that the automatic posting requires  adtional specifications.and since the difference is not from one open item  this method can not be used.
    Need help on this.
    Thanks in advance

    Thank you All,
    i tried connecting using AD Browser from Microsoft, and it went in properly. then i found out that the AD Team here were giving a Wrong Credentials to connect, they Gave me HYP_OID which infact turned out to be a Principal name instead of a 'cn'.
    after searching in the AD Browser i found the correct cn which is "Hyperion OID", then it went to the second Screen where now i am trying to search for the Users based on thier Job Nature.
    Thank you for all the Support Guys, you both "Celvin" and "John" are the Top Guys under my Search list for any technical Assistance.
    Thank you once again Friends....
    Regards,
    Sunil...
    Shantan....

  • Error while configuring the directory in ALBPM Enterprise 6.0 WL edition

    Hi,
    We have installed ALBPM Enterprise 6.0 for Weblogic edition to deploy ALBPM processes into Enterprise 6.0. I tried to configure directory through ALBPM admin center.
    I have checked the below options and provided necessary information asked in the series of dialog boxes.
    - Create Directory Service
    - Create Process engine
    - Create ALBPM application EARs
    - BEA Weblogic Configuration
    We get error in the last step (BEA weblogic configuration) stating that there is some problem in executing the WLST script:-
    Problem invoking WLST - Traceback (innermost last):
    File "C:\Documents and Settings\14360\.configWizard\tmp\config.py", line 640, in ?
    NameError: engineType
    We tried to deploy the ALBPM application EARs manually to weblogic. But there are lot of dependencies, so we couldn't successfuly deploy them.
    Appreciate any help on resolving the WLST error.
    Thanks in advance
    Deepak

    Deepak:
    Could you please check the info on
    http://tracker.fuegolabs.com/browse/EAP-985
    HTH
    Nico
    Deepak Vinod Kumar wrote:
    Hi,
    We have installed ALBPM Enterprise 6.0 for Weblogic edition to deploy ALBPM processes into Enterprise 6.0. I tried to configure directory through ALBPM admin center.
    I have checked the below options and provided necessary information asked in the series of dialog boxes.
    - Create Directory Service
    - Create Process engine
    - Create ALBPM application EARs
    - BEA Weblogic Configuration
    We get error in the last step (BEA weblogic configuration) stating that there is some problem in executing the WLST script:-
    Problem invoking WLST - Traceback (innermost last):
    File "C:\Documents and Settings\14360\.configWizard\tmp\config.py", line 640, in ?
    NameError: engineType
    We tried to deploy the ALBPM application EARs manually to weblogic. But there are lot of dependencies, so we couldn't successfuly deploy them.
    Appreciate any help on resolving the WLST error.
    Thanks in advance
    Deepak

  • Error while configuring the database connection in sharepoint configuration wizard.Sharepoint 2007.

    System
    Provider
    [ Name]
    SharePoint
    Products and Technologies Configuration
    Wizard
    EventID
    104
    [ Qualifiers]
    0
    Level
    2
    Task
    0
    Keywords
    0x80000000000000
    TimeCreated
    [ SystemTime]
    2014-11-06T02:03:00.000Z
    EventRecordID
    11054
    Channel
    Application
    Computer
    HZNTPMSWSMOS001.NEO-DIAGEO.com
    Security
    EventData
    Failed
    to create the configuration database. An exception of type
    System.SystemException was thrown. Additional exception information: The trust
    relationship between this workstation and the primary domain failed.
    System.SystemException: The trust relationship between this workstation and the
    primary domain failed. at
    System.Security.Principal.NTAccount.TranslateToSids(IdentityReferenceCollection
    sourceAccounts, Boolean& someFailed) at
    System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection
    sourceAccounts, Type targetType, Boolean forceSuccess) at
    System.Security.Principal.NTAccount.Translate(Type targetType) at
    Microsoft.SharePoint.Administration.SPProcessIdentity.GetMachineRelativeSecurityIdentifier(SPServer
    server, Boolean& isMachineAccount) at
    Microsoft.SharePoint.Administration.SPProcessIdentity.GrantIdentityAccessToDatabase(SPProcessIdentity
    identity, SPDatabase database) at
    Microsoft.SharePoint.Administration.SPProcessIdentity.GrantIdentityDatabaseAccess()
    at Microsoft.SharePoint.Administration.SPProcessIdentity.Update() at
    Microsoft.SharePoint.Administration.SPWindowsService.Update() at
    Microsoft.SharePoint.Administration.SPFarm.CreateBasicServices(SqlConnectionStringBuilder
    administrationContentDatabase, IdentityType identityType, String farmUser,
    SecureString farmPassword) at
    Microsoft.SharePoint.Administration.SPFarm.Create(SqlConnectionStringBuilder
    configurationDatabase, SqlConnectionStringBuilder administrationContentDatabase,
    IdentityType identityType, String farmUser, SecureString farmPassword) at
    Microsoft.SharePoint.Administration.SPFarm.Create(SqlConnectionStringBuilder
    configurationDatabase, SqlConnectionStringBuilder administrationContentDatabase,
    String farmUser, SecureString farmPassword) at
    Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.CreateOrConnectConfigDb()
    at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.Run()
    at
    Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()

    Hi,
    This issue seems to be a machine Issue. From message is seems that your Computer is not properly connected to Domain.  use the steps in the below link and try doing your steps again.
    https://support.microsoft.com/kb/162797?wa=wsignin1.0
    Regards

  • I am getting an error while configuring the ibots

    hi all.
    when i was Execute the CryptoTools utility to add the Scheduler Administrator credentials to the Presentation Services Credential Store:
    i was getting an error .....
    Run time Error
    program: c:\oracle\web\bin\cryptotools.exe
    Applications has require the runtime to terminate it in unusal way
    please applications's support team for more information..
    What is the problem , please let me know ,
    Thanks

    KUP-04063: unable to open log file EXT_ZPP0A871_6738.log
    OS error Permission deniedThe error seems quite clear... what's you OS and Oracle version ?

  • Error while load the data from CSV with CTL file..?

    Hi TOM,
    When i try to load data from CSV file to this table,
    CTL File content:
    load data
    into table XXXX append
         Y_aca position char (3),
         x_date position date 'yyyy/mm/dd'
    NULLIF (x_date = ' '),
    X_aca position (* + 3) char (6)
    "case when :Y_aca = 'ABCDDD' and :XM_dt is null then
    decode(:X_aca,'AB','BA','CD',
    'DC','EF','FE','GH','HG',:X_aca)
    else :X_aca
    end as X_aca",
    Z_cdd position char (2),
         XM_dt position date 'yyyy/mm/dd'
    NULLIF XM_dt = ' ',
    When I try the above CTL file; geting the following error..
    SQL*Loader-281: Warning: ROWS parameter ignored in parallel mode.
    SQL*Loader-951: Error calling once/load initialization
    ORA-02373: Error parsing insert statement for table "XYZ"."XXXX".
    ORA-00917: missing comma

    Possible Solutions
    Make sure that the data source is valid.
    Is a member from each dimension specified correctly in the data source or rules file?
    Is the numeric data field at the end of the record? If not, move the numeric data field in the data source or move the numeric data field in the rules file.
    Are all members that might contain numbers (such as "100") enclosed in quotation marks in the data source?
    If you are using a header, is the header set up correctly? Remember that you can add missing dimension names to the header.
    Does the data source contain extra spaces or tabs?
    Has the updated outline been saved?

Maybe you are looking for