ERROR While Configuring the SSL Key Pair SAP NW 7.3
I am trying to create new key pair entry to use for SSL. I am getting weird error, after importing certificate response ssl-credential entry goes invalid.
Below are list of step I carried prior getting error.
1) Deleted existing Java key pair from existing view ICM_SSL_<Instance_ID>
2) Generated new pair entry
3) Generated certificate sign request.
4) Sent to SAP CA at SAP Trust Center Service at service.sap.com/tcs.
5) Import certificate request.
And ssl-credential entry turns red , with error"This entry expired"
Please see screenshot below
I am trying to create new key pair entry to use for SSL. I am getting weird error, after importing certificate response ssl-credential entry goes invalid.
Below are list of step I carried prior getting error.
1) Deleted existing Java key pair from existing view ICM_SSL_<Instance_ID>
2) Generated new pair entry
3) Generated certificate sign request.
4) Sent to SAP CA at SAP Trust Center Service at service.sap.com/tcs.
5) Import certificate request.
And ssl-credential entry turns red , with error"This entry expired"
Please see screenshot below
Similar Messages
-
Windows 8.1 Hyper-V - Error while configuring the hard disk 0xC03A0014
Hello. I have just enabled Hyper-V on my Windows 8.1 laptop.
Dell Latitude E7440 i7-4600U @ 2.10GHz
I can create a Virtual-Switch but I am unable to create a new Hard Disk or Virtual Machine within Hyper-V. I get the same error for both processes.
Error: The Virtual Machine Management Service encountered an error while configuring the hard disk on virtual machine New Virtual Machine.
Failed to create the virtual hard disk.
The system failed to create C:\Users\user\Documents\Test\New.vhdx .
Failed to create the virtual hard disk
The system failed to create C:\Users\user\Documents\Test\New.vhdx . A Virtual disk support provider for the specified file was not found. (0xC03A0014).
I have ran all Dell Client System updates and all of windows updates.
I have attempted to create a virtual machine on the current SSD and also an external drive. The same error appears.
I have also attempted to create a virtual hard disk via Hyper-v with a Base vhdx, still the same error occurs. I've tested the base image on other laptops of the same model and windows 8.1 without issue.
Any thoughts on how I can fix this?
Thank you,
-JakeHi Jake,
"Enable Data Execution Protection (DEP) in the BIOS and make sure the Format of drive file system is not fat32.
1. Uninstall Intel Active System Monitor 3.0, if installed.
2. Disable "Intel IPMI Service" and "Intel Monitoring Agent" Service.
3. Open regedit and locate: HKLM\System\CurrentControlSet\Services\imbdrv.
4. Change the Start Key to 4 (Disabled).
5. Locate HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E97D-E325-11CE-BFC1-0 8002BE10318}.
6. Take ownership of the ‘Properties’ key.
7. Give yourself full permission for this key.
8. Now locate the properties key; if you see a ‘Security’ entry there, that is your problem. Delete this key.
9. Try attaching or adding the VHD again after rebooting.
If above steps did not help, add the Network Service account to Local Administrator group."
It is quoted from the similar thread below :
http://social.technet.microsoft.com/Forums/windows/en-US/55085ff3-0f26-41bd-b590-bb3490e2d6f5/win-7-professional-a-virtual-disk-support-provider-for-the-specified-file-was-not-found?forum=w7itprovirt
Hope it helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Hyper-V encountered an error while Configuring the network on Vmachine
Hi all,
i am novice in window server 201, I learning from a ebook.While i doing the step of creating virtual machine , i got this error
Hyper-V encountered an error while configuring the network on Vmachine
Hyper-V encountered an error trying to access an object on computer 'localhost' because the object was not found. The object might have been deleted, or you might not have permission to perform the task. Verify that the virtual Machine Management service
on the computer is running. If the service is running,try to perform the task again by using Run as AdministratorWindows Server 201? Are you sure?
What sort of machine are you trying to install and run Hyper-V on? What OS is it running?
Bill -
Error While Configuring the Shared Service with Active Directory
Hi All,
I am getting a error while configuring MSAD with Shared Service, when entering the User Id and password and clicking next, the following error is displayed:
"EPMCSS-05180:Failed to validate Security configuration. Failed to connect. Invalid values for Base DN, User DN or Password. Enter valid value(s). Root Cause : [LDAP: error code 49 - 80090308: LdapErr: DSID-0C0903A9, comment: AcceptSecurityContext error, data 52e, v1db1]"
The AD user has the read access to the all users and group in Active Directory. If I use an Active Directory user with Admin privilege, It is getting connected.
But client is not ready to provide the Admin Access due to their internal policy and I also don't have any document which says admin privilege is required. According to the document,the user should have the following privileges only.
"The distinguished name of the user that Shared Services should use to bind with the user directory. This user must have search privilege on the RDN attribute within the DN. For example, in the dn: cn=John Doe, ou=people, dc=myCompany, dc=com, the bind user should have search access to the cn attribute.Special characters in User DN must be specified using escape characters. See “Using Special Characters” on page 46 for restrictions.
Example: cn=admin,dc=myCompany,dc=com
But I am getting confused with the statement "This user must have search privilege on the RDN attribute within the DN". Is it not search privillege?
Can anybody help me with required privilege for Active Directory user to configure with Shared Service.
Thanks in Advance,
SunilThank you All,
i tried connecting using AD Browser from Microsoft, and it went in properly. then i found out that the AD Team here were giving a Wrong Credentials to connect, they Gave me HYP_OID which infact turned out to be a Principal name instead of a 'cn'.
after searching in the AD Browser i found the correct cn which is "Hyperion OID", then it went to the second Screen where now i am trying to search for the Users based on thier Job Nature.
Thank you for all the Support Guys, you both "Celvin" and "John" are the Top Guys under my Search list for any technical Assistance.
Thank you once again Friends....
Regards,
Sunil...
Shantan.... -
Sequence tag error while importing the SSL certificate into ".keystore" fil
I have created the ".keystore " file successfully and also imported the "root.cer".
but while importing the SSL certificate it says like
"keytool error: java.security.cert.CertificateException: IOException: Sequence ta
g error" (I got the certificate from Verisign)
How to resolve this Error?
can anyone help me?
mail to:: [email protected]
Thanks in AdvanceHi,
I resolved this error by making it sure that there are no extra spaces or unwanted caracter copied while copying the certificate response from the CA. Make sure you are copying the certificate response properly. In my case, some extra space was getting copied so after re-copyinf it properly, it worked. -
Error While Run the WebI Report on SAP BW Query
Hi
I have build the universe on SAP BW Query . I built the same universe on the SAP BW DEV and SAP BW Test
When I tried to run the WEBI Report on the Universe which is built on the SAP BW Test
WebI Report is prompting for the below values
Calendar Year
Profit Center
Profit Center Hierarchy
Version.
Here I can see the List of values for the Calendar Year and Profit Center. Its giving me below error when I look for list of values for the Profit Center and Profit Center Hierarchy.
u2018Database error: [SOFA Driver] : The operation completed successfully.. Contact your Business Objects administrator or database supplier for more information. (Error: WIS 10901)u2019
My Questions:
1. Why I am getting this error. Because of authentication or configurations set on the Profit Center and Profit Center Hierarchy objects? If so , please let me know what I need to set?
When I tried to run the same WEBI Report on universe which build on SAP BW Dev Query. I can see list of values for the Calendar Year, Version, Profit Center, Profit Center Hierarchy.
But when I selected the values and tried to run the report. I got below error.
u2018Query 1 - P&L Structure Monthly_Devtst
Database error: [SOFA Driver] : The MDX query SELECT NON EMPTY HIERARCHIZE( {[Measures].[4CEX5LZ5571LCZHJBK0L0360P],[Measures].[4CEX5MM6Q2UPWV3VT27LU9261]} ) DIMENSION PROPERTIES PARENT_UNIQUE_NAME ON COLUMNS , NON EMPTY HIERARCHIZE( { [0CALMONTH].[LEVEL00].MEMBERS } ) DIMENSION PROPERTIES PARENT_UNIQUE_NAME ON ROWS FROM [ZFIGLPCBM/ZZFIGLPCBM04_Q011] SAP VARIABLES [!V000001] INCLUDING =[0PROFIT_CTR 1000HCICONS08] [!V000002] INCLUDING =2 [!V000003] INCLUDING =2008 [!V000004] INCLUDING =000 failed to execute with the error Value "0000000002" for variable "Profit Center" is invalid. Contact your Business Objects administrator or database supplier for more information. (Error: WIS 10901)u2019
My Questions :
1. What is this error? Please suggest the solution to run the report successfully.
Also I am attaching Print Screens of DEV and Test reports Prompts and Errors.
Here I am using Business Objects XI R2 SP4
I am sorry if I confused you with elaborated explanation, I have very less knowledge of BO and SAP BW ..
Please help me with your valuable suggestions.
Thanks,
AnithaHi Ingo,
- the BI Query in the Test system is running correct and all the variables do work ?
Yes, BI Query is working fine in the Test System and I can see all the variables too
In BI Query I can see values for Calendar Year, Version, Profit Center, Profit Center Hierarchy
- the Universe has all the variables ?
Yes, Universe has all the variables.
- do you see values in the Web Intelligence prompts when you run the report ?
No,
I can only see values for the Calendar Year & Version in the Web Intelligence Prompt.
When I try to see values for the Profit Center & Profit Center Hierarchy in the Web Intelligence Prompt, its showing below error.
u2018Database error: [SOFA Driver] : The operation completed successfully.. Contact your Business Objects administrator or database supplier for more information. (Error: WIS 10901)u2019
I can send you the Print Screens of Prompts & Errors, but i don't know how to attach the file here.
Thanks,
Anitha -
Error while configuring the domain "Configure JDBC Component Schema"
Hi Everyone,
I have installed SOA Suite 11g on my Win 7 machine 64bit OS and while trying to configure the domain for the WebLogic Server. I fallowed the wizard and everything went well till the JDBC Component Schema window. Here I am able to pass through
1. BAM Schema- Failed
2. SOA Infrastructure-Failed
3. User Messaging Service-Passed
4. OWSM MDS Schema-Passed
5. SOA MDS Schema-Passed
and here is the error that i am facing...
Component Schema=BAM Schema
Driver=oracle.jdbc.OracleDriver
URL=jdbc:oracle:thin:@localhost:1521/XE
User=DEV_ORABAM
Password=*******
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='BAM' and version='11.1.1.2.0'
CFGFWK-60850: Test Failed!
CFGFWK-60853: A connection was established to the database but no rows were returned from the test SQL statement.
Component Schema=SOA Infrastructure
Driver=oracle.jdbc.xa.client.OracleXADataSource
URL=jdbc:oracle:thin:@localhost:1521/XE
User=DEV_SOAINFRA
Password=*******
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='SOAINFRA' and version='11.1.1.2.0'
CFGFWK-60850: Test Failed!
CFGFWK-60853: A connection was established to the database but no rows were returned from the test SQL statement.
I googled the error and tried to check whether the Schema_version_registry has any rows are not and initially i don't have any and then I have created table named "Schema_version_registry" and then inserted the values accordingly..
CREATE TABLE schema_version_registry(owner VARCHAR2(30), mr_type VARCHAR2(10), version VARCHAR2(50));
INSERT INTO schema_version_registry(owner, mr_type, version) VALUES ('DEV_SOAINFRA','MDS','11.1.1.2.0');
similarly i did for the DEV_ORABAM but there is no use...........
I am struck at this position can any please help me out........... please..
Thanks in advance
Sorry Guys.. I understood my mistake and change the "mr-type" accordingly... it is successful now..
Thanks if anyone tried to answer it.......
Edited by: user10763276 on Oct 10, 2010 5:11 PMHi can anyone please help me ...all the jdbc component schema is failing for me while creating domain.
please find the log.
Component Schema=SOA Infrastructure
Driver=oracle.jdbc.xa.client.OracleXADataSource
URL=jdbc:oracle:thin:@localhost:1521/XE
User=sys as sysdba
Password=*********
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='SOAINFRA' and version='11.1.1.5.0'
CFGFWK-60850: Test Failed!
CFGFWK-60853: A connection was established to the database but no rows were returned from the test SQL statement.
Component Schema=User Messaging Service
Driver=oracle.jdbc.OracleDriver
URL=jdbc:oracle:thin:@localhost:1521/XE
User=sys as sysdba
Password=*********
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='ORASDPM' and version='11.1.1.2.0'
CFGFWK-60850: Test Failed!
CFGFWK-60853: A connection was established to the database but no rows were returned from the test SQL statement.
Component Schema=OWSM MDS Schema
Driver=oracle.jdbc.OracleDriver
URL=jdbc:oracle:thin:@localhost:1521/XE
User=sys as sysdba
Password=*********
SQL Test=select 1 from schema_version_registry where
owner=(select user from dual) and mr_type='MDS' and
version='11.1.1.5.0'
CFGFWK-60850: Test Failed!
CFGFWK-60853: A connection was established to the database but no rows were returned from the test SQL statement.
Component Schema=SOA MDS Schema
Driver=oracle.jdbc.OracleDriver
URL=jdbc:oracle:thin:@localhost:1521/XE
User=sys as sysdba
Password=*********
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='MDS' and version='11.1.1.5.0'
CFGFWK-60850: Test Failed!
CFGFWK-60853: A connection was established to the database but no rows were returned from the test SQL statement.
" -
Error while configuring the ASM on linux
i am trying to implement ASM of the virtual machine.. i downloaded the ASM libraries and packages and installed them as a "root" user using the following command:
$>rpm -Uvh oracleasm*
after the installtion was done i went to configure the library driver by executing the following command(also as a root user)
$>/etc/init.d/oracleasm configure...
i answered all the question given by the command and then the following error message occured..
This will configure the on-boot properties of the Oracle ASM library
driver. The following questions will determine whether the driver is
loaded on boot and what permissions it will have. The current values
will be shown in brackets ('[]'). Hitting <ENTER> without typing an
answer will keep that current value. Ctrl-C will abort.
Default user to own the driver interface [oracle]:
Default group to own the driver interface [dba]:
Start Oracle ASM library driver on boot (y/n) [y]:
Fix permissions of Oracle ASM disks on boot (y/n) [y]:
Writing Oracle ASM library driver configuration: [ OK ]
Loading module "oracleasm": Unable to load module "oracleasm"
[FAILED]
i don't have much experience with ASM to solve this problem, so if someone can help then i will appreciate it.
NOTE: my platform is
ORACLE10gR2(10.2.0.1)
RHEL 4 update 5.i have been trying to delete the ASM library driver and install it again but i get this message everytime i do so..,
[root@localhost RPMS]# rpm -ev oracleasm-2.6.9-55.0.0.0.2.EL-2.0.3-2.i686.rpm
error: package oracleasm-2.6.9-55.0.0.0.2.EL-2.0.3-2.i686.rpm is not installed
then i execute the following command to install it and the following appears.
[root@localhost RPMS]# rpm -ivh oracleasm-2.6.9-55.0.0.0.2.EL-2.0.3-2.i686.rpm
warning: oracleasm-2.6.9-55.0.0.0.2.EL-2.0.3-2.i686.rpm: V3 DSA signature: NOKEY, key ID b38a8516
Preparing... ########################################### [100%]
package oracleasm-2.6.9-55.0.0.0.2.EL-2.0.3-2 is already installed
it is really weired,,,
if someone have encountered this scenario then please explain this issue for me. -
Error while installing the EHP 1 for SAP NetWeaver Developer Studio (NWDS)
Dear All,
I am trying to install the EHP 1 for SAP NetWeaver Developer Studio (NWDS) 7.1 .It got installed once but when i was trying to deploy the application i was getting an error sayind that we need to have JDK1.5 Update 14 or higher for the installation.
Now i have JDK 1.5.0_14 installed in my system.So i Uninstalled the EHP 1 for SAP NetWeaver Developer Studio (NWDS) and i am trying to reinstall it but i am getting the following error
ERROR:
Unable to complete action for feature "SAP NetWeaver Developer Studio Facades" due to errors.
Execution failed! Commmand: "msiexec.exe /norestart /qb /i librfc32.msi /lvx C:\DOCUME1\NS46249\Local Settings\Temp\com.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log ALLUSERS=2 REBOOT=ReallySuppress". Exit value: "1639". Working directory: "D:\Program Files\SAP\IDE\CE7.1.1\eclipse\features\com.sap.netweaver.developerstudio.facades_7.1.0.081112155351". Log file: "C:\DOCUME1\NS46249\Local Settings\Temp\com.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log".
Can anybody please help me in resolving this issue.Please help needed as early as possible.
Thanks in Advance:)
Regards,
Nishita SalverDear Nishita,
I hope you have removed the older version of jdk before installing the new version of jdk. Also after un installation of NWDS, did you delete all the temp files and also the directories created during the original installation of NWDS. Also did you restart your system after the uninstallation of NWDS EHP1 and older jdk before reinstallation of the two softwares?
Regards,
Veera
P.S. The first thing you can try is restarting the PC and try resuming the installation, if it doesnt succeed, please remove all traces of NWDS and JDK, restart pc and then resinstall both of them. -
Error while configuring the application server for ESB on Jdeveloper
While i try to configure a application server connection on Jdeveloper for a remote installation of ESB (advanced mode with all the three components together and not in a cluster mode) i get the following error :
Error getting OC4J Process for: opmn-home+oc4j-10.10.36.21-6003-default:
Error connecting to OPMN (is it running?): Connection refused: connect
All the OC4J processes are running on the server as i get the following output for the ./opmnctl status command :
[oraclesoa@esboid2 bin]$ ./opmnctl status
Processes in Instance: home.localhost.localdomain
--------------------------------------------------------------+---------
ias-component | process-type | pid | status
--------------------------------------------------------------+---------
OC4JGroup:default_group | OC4J:oc4j_soa | 10000 | Alive
OC4JGroup:default_group | OC4J:home | 9999 | Alive
ASG | ASG | N/A | Down
HTTP_Server | HTTP_Server | 9998 | Alive
The installation is on a Linux box.
I give the following details in the connection properties box in Jdeveloper :
host : 10.10.36.21
opmn port : 6003
oc4j instance : home
Also the opmn port is correct :
[oraclesoa@esboid2 bin]$ ./opmnctl status -port
esboid2:6003
Any ideas on this?
Message was edited by:
Nilayi tried with taht.....same error.......is this an issue with port 6003 on the server........it is a linux server and I cannot telnet to it......i can use SSH though.......how to know whether the opmn port(6003) is open or not?.....
-
Error while configuring the database
Hello all-
I have installed Oracle 11G and i am trying to create a Database via Database Configuration Assistant & i get following Error:
May 17, 2010 2:22:55 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM Configuration Assistant again .
Refer to the log file at C:\app\admin\cfgtoollogs\dbca\FOUNDATION\emConfig.log for more details.
May 17, 2010 2:22:55 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM Configuration Assistant again .
at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:3245)
at oracle.sysman.emcp.EMReposConfig.unlockMGMTAccount(EMReposConfig.java:1001)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:346)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:158)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:253)
at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:583)
at oracle.sysman.assistants.util.em.EMConfigStep.executeImpl(EMConfigStep.java:139)
at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
at oracle.sysman.assistants.util.step.BasicStep.callStep(BasicStep.java:251)
at oracle.sysman.assistants.dbca.backend.PostDBConfigureStep.executeImpl(PostDBConfigureStep.java:269)
at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2667)
at java.lang.Thread.run(Thread.java:595)
May 17, 2010 2:22:55 PM oracle.sysman.emcp.EMConfig restoreOuiLoc
CONFIG: Restoring oracle.installer.oui_loc to C:\app\admin\product\11.2.0\dbhome_1\oui
I have seen the service for the Listener its up & running. Is there something that i shud do to register the database service with listener.
Any help would be appreciated.
Thanks!Hello,
As previously posted you don't have to download Netca or Net Manager.
However, you may find on the links below an introduction to these tools:
http://www.orafaq.com/wiki/NetCA
http://www.orafaq.com/wiki/Net_Manager
Hope this help.
Best regards,
Jean-Valentin -
Error while configuring the directory in ALBPM Enterprise 6.0 WL edition
Hi,
We have installed ALBPM Enterprise 6.0 for Weblogic edition to deploy ALBPM processes into Enterprise 6.0. I tried to configure directory through ALBPM admin center.
I have checked the below options and provided necessary information asked in the series of dialog boxes.
- Create Directory Service
- Create Process engine
- Create ALBPM application EARs
- BEA Weblogic Configuration
We get error in the last step (BEA weblogic configuration) stating that there is some problem in executing the WLST script:-
Problem invoking WLST - Traceback (innermost last):
File "C:\Documents and Settings\14360\.configWizard\tmp\config.py", line 640, in ?
NameError: engineType
We tried to deploy the ALBPM application EARs manually to weblogic. But there are lot of dependencies, so we couldn't successfuly deploy them.
Appreciate any help on resolving the WLST error.
Thanks in advance
DeepakDeepak:
Could you please check the info on
http://tracker.fuegolabs.com/browse/EAP-985
HTH
Nico
Deepak Vinod Kumar wrote:
Hi,
We have installed ALBPM Enterprise 6.0 for Weblogic edition to deploy ALBPM processes into Enterprise 6.0. I tried to configure directory through ALBPM admin center.
I have checked the below options and provided necessary information asked in the series of dialog boxes.
- Create Directory Service
- Create Process engine
- Create ALBPM application EARs
- BEA Weblogic Configuration
We get error in the last step (BEA weblogic configuration) stating that there is some problem in executing the WLST script:-
Problem invoking WLST - Traceback (innermost last):
File "C:\Documents and Settings\14360\.configWizard\tmp\config.py", line 640, in ?
NameError: engineType
We tried to deploy the ALBPM application EARs manually to weblogic. But there are lot of dependencies, so we couldn't successfuly deploy them.
Appreciate any help on resolving the WLST error.
Thanks in advance
Deepak -
Error while configuring the automatic payment
Hi
I configured for the over and under payment. However whenever i try to to use the reason code i get an error . reason code with automatic charge off is not permitted here.I was using the Tcode F-28
The diagnosis says that the automatic posting requires adtional specifications.and since the difference is not from one open item this method can not be used.
Need help on this.
Thanks in advanceThank you All,
i tried connecting using AD Browser from Microsoft, and it went in properly. then i found out that the AD Team here were giving a Wrong Credentials to connect, they Gave me HYP_OID which infact turned out to be a Principal name instead of a 'cn'.
after searching in the AD Browser i found the correct cn which is "Hyperion OID", then it went to the second Screen where now i am trying to search for the Users based on thier Job Nature.
Thank you for all the Support Guys, you both "Celvin" and "John" are the Top Guys under my Search list for any technical Assistance.
Thank you once again Friends....
Regards,
Sunil...
Shantan.... -
Hi,
This is security specific issue with regard to SNC configuration, may I suggest you to open a thread at forum : SAP Netweaver -> Security ?
Regards,
VincentThanks for the suggestion
-
Error while configuring the People Soft adapter with ESB
Hi All,
We are intergarting PeopleSoft application using ESB ver 10.1.3.1
I have been following the Oracle Application Server Adapter for People Soft User's Guide.
The following are the steps covered.
1. Basic installation of the SOA Suite done (On the windows machine)
2.Packaged application adapters installed.
3. Post installation tasks carried out
a Installed Patch 5895585
b Library files copied(psjoa.jar from the target peoplesoft application server)
c.BSE deployment verification done.
d we would be using the file repository for BSE
Then I created a configuration for BSE (creating a new configuration )
And then I can see all the 3 nodes -Adapters,Events and Business Services.
But when I click on the adapters node I do not see any adapters and I get the following error:
"This application has failed to start because iwsiebel.core.dll was not found.Re-installing the application may fix this problem"
I have done the installation again but still getting the same error.
I checked and the above dll is present at the following location :
<Oracle_Home>\adapters\application\lib
<Oracle_Home>\j2ee\<oc4j_container>\connectors\jca-app-adapter\jca-app-adapter
Any pointers or suggestion on how I can overcome or resolve this issue..??
Thanks & Regards,
ShilpaHi All,
Any pointers or direction to resolve this issue would really be helpful... ?
Thanks &Regards,
Shilpa
Maybe you are looking for
-
1394 adapter from analog VHS-C to Premiere
I've got a job to copy video from some old VHS-C tapes to DVD. I hope that I can use the 1394 ports (FireWire) on my motherboard or USB 3 for receive analog signal from the camcorder. Which adapter should I buy to be sure that it can be used to Prem
-
WHY Price is not defaulted from inforecord in a P.O with material group.
When i tried to create P O for a material group & i mentioned material text, Price was not defaulted in PO from inforecord unless i mention inforecord number even if i mentioned vendor & valid inforecord is exist for the same material group & vendor
-
Is there an option to add subscribed calender to icloud?
is there an option to add subscribed calender to icloud?
-
Migrating to new Skype id + importing 1200+ contac...
Hello, I am new here to the forums however a long time Skype user. I recently ran into an issue which at first I thought would have been a minor infraction (mainly from my misinterpretation of bulk contact requests) but now has snowballed into a big
-
Hi All - Cannot See Adobe Edge/Animate in Adobe Application Manager?
Edit: Have just figured out that this is down to this machine's OS being Windows XP. Hi All, I am to get to use the release version of Adobe Edge, having had a couple of the pre-releases. I have signed up for Creative Cloud, downloaded and ran the ap