Error while connecting to discoverer plus OLAP
when I try to connect to discoverer plus OLAP I get this error
ERROR:An error occured during OLAP API metadata retrieval,this probably caused by inconsistent metadata
have you idea how to resolve that problem?
Thank you
Hello
Do you have a copy of my Discoverer 10g Handbook? If so, chapter 16 on pages 548 to 612 cover OLAP in some detail. This chapter was written by Mark Rittman, OLAP expert extraordinaire.
He also runs a blog which you may find to be of some help: http://www.rittmanmead.com/blog/
There is at least one Oracle by Example which may help: http://www.oracle.com/technology/obe/obe_bi/discoverer/discoverer_1012/index.html
There are also some Oracle demonstrations on OLAP on the bottom right hand side of this page: http://www.oracle.com/technology/products/discoverer/index.html
Best wishes
Michael
Similar Messages
-
Error on connecting to discoverer plus
I'm triying to connect to Discoverer Plus or Viewer. When I get to the login screen, fill all the required fields, but I got the following message: "The application encountered an invalid state.
- - Nested exception: org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 201 completed: No
OracleBI Discoverer Viewer was unable to find the necessary data for displaying the results of this event. Please correct any errors and try again."
can you please help me out so solve this prob.
the discoverer plus version is 10.1.2.48.18Currently there is not enough information to realy de-bug the issue. I would look at the URL and verify that the URL with the connections page is the same as after entering the connection information. The URL can change if there is a Load Balancer or Proxy server involved.
Run the Discoverer script below to verify the Discoverer server is up and working.
$MidOH/discoverer/util > . ./checkdiscoverer.sh
Next look in the Discoverer application.log for additional information about the error. It is located at:
$MidOH/j2ee/oc4j_bi_forms/application_deployments/discoverer/oc4j_bi_forms_default_island_1
If these messages do
You are running an older release of 10g. The latest production release of 10g is 10.1.2.3 with Cumulative Patch 6 applied. See Note 237607.1 - ALERT: Required and Recommended Patch Levels For All Discoverer Versions. This Note is kept up to date.
Regards, -Sharon -
ORA-6502 Value or Numeric Error while connecting to Sql-Plus - URGENT
Hello,
I am getting ORA-6502 error, "Error accessing Package Dbms_application_info" everytime I connect to Sqlplus. I tried running catproc and catalog but still getting the same message. I dont get this message when I connect to SVRMGR. I am not able to perform export also due to this error. Can anybody help me please??
Thanks,
R. Magesh.Hello,
I am getting ORA-6502 error, "Error accessing Package Dbms_application_info" everytime I connect to Sqlplus. I tried running catproc and catalog but still getting the same message. I dont get this message when I connect to SVRMGR. I am not able to perform export also due to this error. Can anybody help me please??
Thanks,
R. Magesh. Did you run catproc and catalog as SYS while the database was opened in RESTRICT mode? If not, then do that. Also, do SELECT * FROM dba_objects WHERE status='INVALID'; to see if there are other invalid objects that need to be compiled. -
Cannot conect to Discoverer Plus OLAP (D4O-1014 error)
Hello everybody,
On a laptop WindowsXP, 1G RAM, 3GHZ I have installed:
- oracle database 9.2.0.1.0 upgraded to 9.2.07 (dbname=HOMEDB, sid=SIDHOMEDB, hostname=aspire3000); all 9.2.0.7 OLAP patches are applied
- business intelligence 10g 10.1.2.0 (and the BI Tools)
- business intelligence 10g samples version 10.1.2.0.0_c
I cannot connect to Discoverer OLAP.
I try to connect to the sample data using:
user: scott
password: tiger
host: aspire3000
port: 1521
SID: homedb (Regarding the value for SID: my database's sid is sidhomedb, but when I insert sidhomedb as value for SID while connecting to PLUS I receive error: "Insert a valid SID", so instead I insert the dbname: homedb)
I receive the following error: D4O-1014 unknown exception while connecting to database.
The diagnose shows:
<?xml version="1.0" encoding="UTF-8" ?>
<D4OCheckConfig version="1.0.0.0">
<Check key="JDK version" value="1.5.0_06"/>
<Check key="BI Beans internal version" value="3.2.1.0.13"/>
<Check key="Discoverer Plus OLAP version" value="10.1.2.07.59"/>
<Check key="Discoverer version" value="10.1.2.45.46c"/>
<Check key="host" value="aspire3000"/>
<Check key="port" value="1521"/>
<Check key="sid" value="homedb"/>
<Check key="user" value="scott"/>
<Check key="Connect to database" value="Unsuccessful, verify if your connect information is correct and your database instance and listener are available."/>
<Check key="Failure Point" value="JDBCFailed"/>
<Check key="StackTrace">
<![CDATA[
==========================================
1) Listener refused the connection with the following error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
The Connection descriptor used by the client was:
(DESCRIPTION=(ADDRESS=(HOST=aspire3000)(PROTOCOL=tcp)(PORT=1521))(CONNECT_DATA=(SID=homedb)))
1) Listener refused the connection with the following error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
The Connection descriptor used by the client was:
(DESCRIPTION=(ADDRESS=(HOST=aspire3000)(PROTOCOL=tcp)(PORT=1521))(CONNECT_DATA=(SID=homedb)))
================================
java.sql.SQLException: Listener refused the connection with the following error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
The Connection descriptor used by the client was:
(DESCRIPTION=(ADDRESS=(HOST=aspire3000)(PROTOCOL=tcp)(PORT=1521))(CONNECT_DATA=(SID=homedb)))
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:124)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:279)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:321)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:346)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:149)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:31)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:543)
at java.sql.DriverManager.getConnection(Unknown Source)
at java.sql.DriverManager.getConnection(Unknown Source)
at oracle.dss.datautil.client.BICheckConfig.getJDBCConnection(BICheckConfig.java:606)
at oracle.dss.d4o.common.D4OCheckConfig.checkConnection(Unknown Source)
at oracle.dss.d4o.common.D4OCheckConfig.checkConnection(Unknown Source)
at oracle.dss.d4o.gui.common.DiagnoseDialog$ConfigTask.construct(Unknown Source)
at oracle.dss.d4o.gui.common.SwingWorker$4.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
]]>
</Check>
</D4OCheckConfig>
I don't understand what's wrong with the listener. Using the same connection string (user bi_user, host aspire3000, port 1521, SID homedb) I can connect to Discoverer relational with no problems.
Here it is my listener.ora:
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = aspire3000)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = c:\oracle\ora90)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = HOMEDB)
(ORACLE_HOME = c:\oracle\ora90)
(SID_NAME = SIDHOMEDB)
The result of lsnrctl>services is:
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC0)))
Services Summary...
Service "HOMEDB" has 2 instance(s).
Instance "SIDHOMEDB", status UNKNOWN, has 1 handler(S) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Instance "SIDHOMEDB", status READY, has 1 handler(S) for this service...
Handler(s):
"DEDICATED" established:2 refused:0 state:ready
LOCAL SERVER
The listener.log shows:
06-MAR-2006 12:37:57 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=__jdbc__)(USER=))(SID=homedb)) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1038)) * establish * homedb * 12505
TNS-12505: TNS:listener could not resolve SID given in connect descriptor
I don't understand: what's this HOST=_jdbc_ ? My listener.ora is not good?
Any help will be appreciated!
Thank youHi! Keith,
I have the same problem as this one but while accessing oracle database through JDBC. The solution you suggested is to rename database instance since length of instance name is more than 8.But in my case I ket the instance default to xe.Still I am getting same exception while I accessing database through JDBC.Fo your reference I am giving stack trace.
java.sql.SQLException: Listener refused the connection with the following error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
The Connection descriptor used by the client was:
127.0.0.1:1521:xe
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:261)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:387)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:414)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:165)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:35)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:801)
at java.sql.DriverManager.getConnection(DriverManager.java:525)
at java.sql.DriverManager.getConnection(DriverManager.java:171)
at net.kynesys.jdbc.oracle.Test.main(Test.java:21) -
Error connecting in Discoverer Plus/Viewer 10.1.2
I'm triying to connect to Discoverer Plus or Viewer. When I get to the login screen, fill all the required fields, but I got the following message: "The application encountered an invalid state.
- - Nested exception: org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 201 completed: No
OracleBI Discoverer Viewer was unable to find the necessary data for displaying the results of this event. Please correct any errors and try again.
When I run the checkdiscoverer. It works ok in all the checks except for: "Error: Failed to bind to Discoverer Server.
Hint: Try increasing the timeout by changing the timeout value in opmn.xml.". As the hint said I increased the start timeout, I got it up to 3500 and even incresed the minprocs to see if that helped. Nothing worked.
I'm testing this in a Windows XP Pro SP2 installed 1GB Ram. I Installed the BI Tools, App server but no infrastructure. The Installation process finished without any problems, except for a warning regarding not being able to determine the IP address. I can access all the options of the app server.Hi Christian
In your connection to the database are you using a DNS named server or are you using an actual IP address?
By this I mean, when you launch Discoverer, do you do it this way:
http://servername.domain.com:7777/discoverer/plus
or this way:
http://ipaddress:7777/discoverer/plus
If you are using the former, can you go to the server itself and run Discoverer ok? If you can then it is a case that your local machine cannot work out what the IP address is. Let's say, for arguements sake, that you server is http://myserver.mydomain.com and that the IP is 192.168.1.100
You could try editing your HOSTS file and inserting a line in there to associate the IP with the domain. To do this, follow this workflow:
1. Right click on Windows Start button and from pop upmenu select Explore
2. Navigate to the folder called Windows/system32/drivers/etc
3. Locate the file called HOSTS
4. Edit this file with Notepad
5. Insert a line like this:
myserver.mydomain.com 192.168.1.100
6 Save the HOSTS file and exit Explorer
This associates the IP with the server name.
Does this help
Regards
Michael -
Getting "ORA-12514 error" while connecting first time
Hi,
Getting below error while connecting to the database first time.
ORA-12514: TNS:listener does not currently know of service requested in connect
apludc01dat25:e2cmpc1 > tnsping ora37_ap
TNS Ping Utility for Linux: Version 10.2.0.5.0 - Production on 26-MAR-2012 12:00:58
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
/grid/product/crs/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = apl11764clu01-scan-oravip.nat.bt.com)(PORT = 61901)) (CONNECT_DATA = (SERVICE_NAME = ORA37_ap))
OK (0 msec)
apludc01dat25:e2cmpc1 > sqlplus
SQL*Plus: Release 10.2.0.5.0 - Production on Mon Mar 26 12:00:15 2012
Copyright (c) 1982, 2010, Oracle. All Rights Reserved.
Enter user-name: outln@ora37_ap
Enter password:
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
Enter user-name:
apludc01dat25:e2cmpc1 > sqlplus
SQL*Plus: Release 10.2.0.5.0 - Production on Mon Mar 26 12:00:22 2012
Copyright (c) 1982, 2010, Oracle. All Rights Reserved.
Enter user-name: outln@ora37_ap
Enter password:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, Real Application Clusters, OLAP, Data Mining
and Real Application Testing options
SQL>
Please help me out to resolve this issue.
Thank you.
Regards,
DasarathHi,
We are getting this error while connecting remotely.
PFB output of listener status and services
apl11764a001:ORA37a > lsnrctl services LISTENER_ORA37
LSNRCTL for Linux: Version 11.1.0.7.0 - Production on 26-MAR-2012 12:18:06
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_ORA37)))
Services Summary...
Service "ORA37_ap" has 1 instance(s).
Instance "ORA37a", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:2 refused:0 state:ready
LOCAL SERVER
Service "ORA37_ap_XPT" has 1 instance(s).
Instance "ORA37a", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:2 refused:0 state:ready
LOCAL SERVER
Service "ORA37aXDB" has 1 instance(s).
Instance "ORA37a", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1022 state:ready
DISPATCHER <machine: apl11764a001, pid: 25970>
(ADDRESS=(PROTOCOL=tcp)(HOST=apl11764a001)(PORT=10862))
The command completed successfully
apl11764a001:ORA37a > lsnrctl status LISTENER_ORA37
LSNRCTL for Linux: Version 11.1.0.7.0 - Production on 26-MAR-2012 12:18:20
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_ORA37)))
STATUS of the LISTENER
Alias LISTENER_ORA37
Version TNSLSNR for Linux: Version 11.2.0.2.0 - Production
Start Date 26-MAR-2012 12:15:17
Uptime 0 days 0 hr. 3 min. 2 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /grid/product/crs/network/admin/listener.ora
Listener Log File /grid/product/crs/log/diag/tnslsnr/apl11764a001/listener_ora37/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER_ORA37)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.25.169.4)(PORT=62037)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.25.169.7)(PORT=62037)))
Services Summary...
Service "ORA37_ap" has 1 instance(s).
Instance "ORA37a", status READY, has 1 handler(s) for this service...
Service "ORA37_ap_XPT" has 1 instance(s).
Instance "ORA37a", status READY, has 1 handler(s) for this service...
Service "ORA37aXDB" has 1 instance(s).
Instance "ORA37a", status READY, has 1 handler(s) for this service...
The command completed successfully
Thank you.
Regards,
Dasarath -
I am getting error while connecting to sqlplus by using apps account in 11i
i am getting error while connecting to sqlplus by using apps account in 11i. Does anyone has similar error.
[applmgr@appsc05t01 admin]$ sqlplus
SQL*Plus: Release 8.0.6.0.0 - Production on Mon Sep 13 14:34:52 2010
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter user-name: apps
ERROR:
ORA-12514: Message 12514 not found; product=RDBMS; facility=ORA
Enter user-name:
Thanks
Raoyes.
login as: gorantla
[email protected]'s password:
Last login: Mon Sep 13 14:39:23 2010 from glng3wy9g1.actuant.pri
[gorantla@appsc05t01 ~]$ sudo su - applmgr
[applmgr@appsc05t01 ~]$ ora_setup
Available databases:
x = ATUXX
y = ATUYY
z = ATUZZ
Select database: \c
y
ORACLE_SID=ATUYY
IAS_ORACLE_HOME=/apps/ATUYY/atuyyora/iAS
ORACLE_HOME=/apps/ATUYY/atuyyora/8.0.6
APPL_TOP=/apps/ATUYY/atuyyappl
[applmgr@appsc05t01 ~]$
[applmgr@appsc05t01 ~]$
[applmgr@appsc05t01 ~]$
[applmgr@appsc05t01 ~]$ tnsping ATUYY
TNS Ping Utility for Linux: Version 8.0.6.3.0 - Production on 13-SEP-2010 15:42:32
(c) Copyright 1997 Oracle Corporation. All rights reserved.
Attempting to contact (ADDRESS=(PROTOCOL=tcp)(HOST=dbrac05t01-vip.actuant.pri)(PORT=1611))
OK (0 msec)
[applmgr@appsc05t01 ~]$ sqlplus
SQL*Plus: Release 8.0.6.0.0 - Production on Mon Sep 13 15:42:40 2010
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter user-name: apps
ERROR:
ORA-12514: Message 12514 not found; product=RDBMS; facility=ORA
Enter user-name:
Thanks
Rao -
Error while migrating the discoverer repots
HI
we are getting the error while migrating the discoverer reports. Find the below script and the error.
-connect <**********>
-log log_file
-grant_privilege
-apps_user
-eul eul_us
-apps_responsibility DISCOVERER PROJECTS RESOURCE MANAGEMENT
-business_area_access xxxxx Projects
Command completed with errors - see log file for details.
java EulCommandLine -connect <**********> -apps_user -eul eul_us -cmdfile commands_ads_resp -log log_file
Started Fri Apr 24 06:37:45 EDT 2009 ...
Role 'DISCOVERER PROJECTS RESOURCE MANAGEMENT' not found
the above error says the role not found to the particular responsibility. Please let me know how to rectify the above error.
Thanks,
keka.Hi Keka
I am assuming that responsibility does in fact exist in the database? If not, you will need to create it.
Also, try putting double quotes around the responsibility name.
Best wishes
Michael -
Error while connecting to HTTPS WebService through Jdev
I am having issues while trying to connect to a webservice that require SSL. Has anybody seen similar exception below or any suggestion/best practice docs of how to setup the cert?
WARNING: Unable to connect to URL: https://itsolutions/AppIntegration/org/test/sendRequest.jpd due to java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
java.rmi.RemoteException: ; nested exception is:
HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested targetDear All,I am getting this error while connecting to ASDM Please help.Your ASA Image has a version number 8.2.1 which is not supported by ASDM 6.1(3)Show Version.....User Access VerificationPassword:
Type help or '?' for a list of available commands.
ASA-PT> en
Password:ASA-PT# show verCisco Adaptive Security Appliance Software Version 8.2(1)
Device Manager Version 6.1(3)Compiled on Tue 05-May-09 22:45 by builders
System image file is "disk0:/asa821-k8.bin"
Config file at boot was "startup-config"ASA-PT up 12 days 0 hoursHardware: ASA5520, 512 MB RAM, CPU Pentium 4 Celeron 2000 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash M50FW080 @ 0xffe00000, 1024KBEncryption hardware device : Cisco ASA-55x0 on-board accelerator (revision 0x0)
Boot microcode : CN1000-MC-BOOT-2.00
SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
IPSec microcode : CNlite-MC-IPSECm-MAIN-2.04
0: Ext: GigabitEthernet0/0 : address is 0024.14d2.1582, irq 9
1: Ext: GigabitEthernet0/1 : address is 0024.14d2.1583, irq 9
2: Ext: GigabitEthernet0/2 : address is 0024.14d2.1584, irq 9
3: Ext: GigabitEthernet0/3 : address is 0024.14d2.1585, irq 9
4: Ext: Management0/0 : address is 0024.14d2.1581, irq 11
5: Int: Internal-Data0/0 : address is 0000.0001.0002, irq 11
6: Int: Internal-Control0/0 : address is 0000.0001.0001, irq 5
<--- More --->ThanksTabrez
Hi Tabrez,
ASA5520 version 8.2.1 is supported with ASDM 6.2(1 and above). Recommended: 6.2(3).check out the below link hope that c;ear out your query !!
http://www.cisco.com/en/US/docs/security/asa/compatibility/asamatrx.html
If helpful do rate the post
Ganesh.H -
How to pass parameter to a Discoverer Plus OLAP Worksheet??
Hi,
I have used discoverer plus OLAP and portal to develop executive dashboards in my company. I put my date dimension in Page Item of discoverer plus OLAP worksheet to view a specific week/month/year of analysis i.e. Jul-07.
Now I have to open all the worksheets and change the page item value when week/month ends. If it was 'Jul-07' then I have to change it as 'Aug-07'.
In discoverer plus OLAP we can't pass parameters as we can in discoverer relational.
Can someone help me how I can set the new values without opening discoverer worksheets?
Regards,
ShahidDear Shahid,
I downloaded the Oracle Application Server SOA Suite 10.1.3.1.0. While installing It gave me two options
1. Basic Install
Install J2EE server and SOA suite of applications including BPEL, ESB
and OWSM.
2. Advance Install (This gives 4 options)
a. J2EE Server, Web Server and SOA suite
b. J2EE Server and Web Server
c. J2EE Server
d. Web Server\
According to your instructions I need to install it as Insfrastructure, BI and portal. Now can you tell me which option of the install I should select in order to meet the requirements of Infrastructure, BI and Portal.
Because I am very new in this technology so If you can guide to me to get started at least then I can follow the Oracle Tutorial for further training.
Thanks very much in this regards.
__Asif -
Hi,
I have installed Oracle Workflow Builder 2.6.3 recently on my system and after installation, when I am trying to connect the workflow builder (using database username/password of that particular instance), it is throwing me the following error:
220: Unable to set NLS_LANGUAGE.
210: Oracle Error: ORA-01403: no data found
. SQL text: SELECT NLS_LANGUAGE FROM WF_LANGUAGES WHERE :l IN (NLS_LANGUAGE, CODE)
In the previous threads when I searched for the same issue, I found that if
select value from v$nls_parameters
where parameter='NLS_CHARACTERSET';
returns the value other then WE8ISO8859P1 then that is what I should change my NLS_LANG entry for the builder - i.e. AMERICAN_AMERICA.<character set>.
But I am not getting where should I change NLS_LANG, it is located where...some file? I am new to Workflow.
Please help me. I tried a lot. Any type of help will be highly appreciated.
Thanks,
SumirThis issue (and solution) is described in ML Doc 577905.1 (Error While Connecting To Database Via Workflow Builder)
HTH
Srini -
Installing Java Dialog Instance - Error while connecting to DB
We would like to add a dialog instance to our production Portal server. We installed Portal as stand-alone on the central instance. We have another server we would like to setup to serve as a Portal dialog instance.
So far I have installed Windows 2003 Server Standard. Installed MSSQL server client tools (database is mssql server). Installed jdk 1.4.62. Set java home and path environmental variables. I'm now installing the Java dialog instance (I can't find any documentation on this). From Netweaver installation CD> SAP NetWeaver '04 Support Release 1> Java System> MS SQL Server> Dialog Instance Installation>
SAP System ID: (sid) ES2
Central Host: SAPEPS02
Path to JAVA DVD supplied> JDK Directory confirmed> Domain paramaters confirmed> domain<sid> account passwords supplied> domain<service><sid> account password supplied> Instance number confirmed>
Installation started> It gets to step 8 and fails stating "Error while connecting to DB". I looked through all the log files and couldn't come up with anything (i'm very thorough).
I tried adding the users to the database as dbowners (no luck). I installed SQL server 2000 with SP4. No where during this installation did I get prompted for database parameters?
Is there something basic i'm missing? Does this scenario not work? Any help would be greatly appreciated. Pointing me in the right direction of the correct documentation would also be appreciated. Thank you in advance.
Sincerely,
Brad DridiHi Brad,
I am facing the same problem. I hope by now you must have got the solution for this.
Can you please let me know how did you overcome this situation?
Thank you!!
Regards,
Abhijeet Bhagat -
JCONTROL - dies with Error while connecting to DB
Hi....Experts
DB : Oracle 10.2.0.4.0
OS ; AIX 5.3
NW : 7.0 SP22
UT : EP
Yesterday the above server got rebooted by a power failure. after that
The server's DB is coming up as ora<sid> user, listener is also up
But as <sid>adm user - when i am starting . The jcotnrol dies and in thee work directory
....log_bootstrap_ID1168012.0.log fiel shows the below messages in the tail end,
================================================================
ERROR-1 : OBSERVED
================================================================
==[ Caused by: ]==----
com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:365)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:130)
at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>(PersistenceHandler.java:38)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>(ConfigurationCache.java:149)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:236)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:49)
at com.sap.engine.bootstrap.Synchronizer.<init>(Synchronizer.java:74)
at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:473)
at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:146)
at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:971)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:88)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:61)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
at java.lang.reflect.Method.invoke(Method.java:391)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Caused by: java.sql.SQLException: Io exception: There is no process to read data written to a pipe.
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:146)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:255)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:387)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:420)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:165)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:35)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:801)
at com.sap.sql.jdbc.NativeConnectionFactory.createNativeConnection(NativeConnectionFactory.java:215)
at com.sap.sql.connect.OpenSQLDataSourceImpl.createPooledConnection(OpenSQLDataSourceImpl.java:608)
at com.sap.sql.connect.OpenSQLDataSourceImpl.getPooledConnection(OpenSQLDataSourceImpl.java:285)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:307)
... 15 more
[Feb 10, 2012 4:46:28 PM ] [Bootstrap module]> Problem occurred while performing synchronization.
================================================================
ERROR-2 : OBSERVED
================================================================
also i see error in work directory ...sapcpe.log as below
Host:d45adm> more sapcpe.log
2012/02/10 19:01:45
sapcpe version UC: @(#) $Id: //bas/700_REL/src/ccm/sapstart/sapxxcpe.c#20 $ SAP
Command line:
0: /usr/sap/D45/SYS/exe/run/sapcpe
1: name=D45
Trace level (profile): 1
INFO: Try to find file table sapcpeft (default:sapcpeft)
INFO: Try to find file table in the central directory /usr/sap/D45/SYS/exe/ctrun/sapcpeft
INFO: not found any file table.
source: /usr/sap/D45/SYS/exe/ctrun
target: /usr/sap/D45/SYS/exe/run
ERROR: sapcpe: find <src> /usr/sap/D45/SYS/exe/ctrun failed, 2, No such file or directory, [sapxxcpe.c:1464]
sapcpe.log: END
================================================================
any thoughts & advises, clues ???
Rgds
PRISSUE - RESOLVED
####Summary######################################
Key Word of this Issue :
Exception in thread "main" java.sql.SQLException: Io exception: There is no process to read data written to a pipe.
Reason
Name resolution by conflict / failure by netsvc.conf even we have hostfile & ping works with host name for Every user.
Solution
Adjusted netsvc.conf file to use the hostfile.
DETAILS OF RESOLUTION
OSS Experts asked me to copy the results
SAP Note No. 867176: FAQ: Oracle JDBC (JdbcCheckup) - Point 10
01. I copied JdbcCheckup.sar to location /home/sidadm/867176-jdbchkup/
02. Extracted the same in same foler with command : SAPCAR -xvf JdbcCheckup.sar
03. Now folder contained 2 files ""JdbcCheckup.java"" and "" JdbcCheckup.sar""
04. my JDBC driver file ojdbc14.jar is in location /oracle/client/10x_64/instantclient/
05. To determine the JDBC driver version issued the below command as per note
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$Command : java -classpath /oracle/client/10x_64/instantclient/ojdbc14.jar:. JdbcCheckup
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Please enter information to test connection to the database
user: SAPSR3DB
password: PASSWORD
database(a TNSNAME entry): SID
Hostname: portalserver
Port (1521): 1527
Connecting to the database...Connecting...
jdbc:oracle:thin:@portalserver:1527:SID, SAPSR3DB, PASSWORD
Exception in thread "main" java.sql.SQLException: Io exception: There is no process to read data written to a pipe.
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:146)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:255)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:387)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:441)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:165)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:35)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:801)
at java.sql.DriverManager.getConnection(DriverManager.java:559)
at java.sql.DriverManager.getConnection(DriverManager.java:189)
at JdbcCheckup.main(JdbcCheckup.java:128)
portalserver:sidadm>
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
06. Immediately id did google with above Syntax of error.
"""java.sql.SQLException: Io exception: There is no process to read data
written to a pipe"""
https://forums.oracle.com/forums/thread.jspa?threadID=1320173
which was referring about netsvc.conf
With UNIX Team discussions, adjusted the host file as first name
resolution source and DNS servers list followed in same(netsvc.conf) file. which
fixed the issue and "JdbcCheckup" passed.
07. JdbcCheckup Command - Passed output.
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$Command : java -classpath /oracle/client/10x_64/instantclient/ojdbc14.jar:. JdbcCheckup
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Command : java -classpath /oracle/client/10x_64/instantclient/ojdbc14.jar:. JdbcCheckup
Please enter information to test connection to the database
user: SAPSR3DB
password: PASSWORD
database(a TNSNAME entry): SID
Hostname: portalserver
Port (1521): 1527
Connecting to the database...Connecting...
jdbc:oracle:thin:@portalserver:1527:SID, SAPSR3DB, PASSWORD
connected.
=============
Database Product Name is ... Oracle
Database Product Version is Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, Data Mining and Real Application Testing options
=============
JDBC Driver Name is ........ Oracle JDBC driver
JDBC Driver Version is ..... 10.2.0.4.0
=============
Hello World
Your JDBC installation is correct.
portalserver:sidadm>
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
BIG THANK TO EVERYONE !!!!!!!!!!!!!!!!
REGARDS
PR -
Hi,
We are getting the error while connecting the database.
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
IBM AIX RISC System/6000 Error: 2: No such file or directory
Error persists only for second or two & again connection comes back.
NOTE-- When this happens only new connection recives the error while existing connection work properly.
On metalink the error description is.
Cause: Unable to locate shared memory realm
Action: Verify that the realm is accessible
also I have checked
SQL> select resource_name,current_utilization,max_utilization,limit_value from v$resource_limit;
RESOURCE_NAME CURRENT_UTILIZATION MAX_UTILIZATION LIMIT_VALU
processes 1044 1091 1100
sessions 1052 1097 1400
enqueue_locks 208 437 17404
enqueue_resources 248 335 UNLIMITED
ges_procs 0 0 0
Kindly advice urgent.IBM AIX 5L
10.2.0.3
Client OS is Windows XP & oracle client using is oracle 8 & 9i client.
TNS Entery of client
AIX.WORLD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (COMMUNITY = tcp.world)(PROTOCOL = TCP)(Host = 192.168.16.50)(Port = 1521))
(ADDRESS = (COMMUNITY = tcp.world)(PROTOCOL = TCP)(Host = 192.168.16.50)(Port = 1526))
(CONNECT_DATA =
(SID = ORCL)
There is only one oracle home on the client mechine
entries in sql* net are
names.directory_path = (TNSNAMES)
names.default_domain = world
name.default_zone = world
names.default_domain=world
erro in the listener log is
18-MAY-2009 16:42:25 * (CONNECT_DATA=(SID=ORCL)(CID=(PROGRAM=UdyogGrid.Exe)(HOST=Windows NT PC)(USER=vmittal))) * (ADDRESS=(PROTOCOL=tcp)(HOST=221.135.27.180)(PORT=2021)) * establish * ORCL * 0
18-MAY-2009 16:42:33 * ping * 0
WARNING: Subscription for node down event still pending.
NOTE-- Problem started from the day we have set the password for the listener.
Kindly advice.
Edited by: Sachin A on May 18, 2009 10:08 PM -
Deserialization Error while connecting to web service
I am getting a deserialization error while connecting to a web service.
Deserializing parameter 'ScheduleReceiveService': could not find deserializer for type {http://www.w3.org/2001/XMLSchema}anyType...
There are two methods ex
UserDefinedClass1 methodA(java.lang.Object ) and
UserDefinedClass2 methodB(UserDefinedClass3)
And when i generate java files using WSDL2Java using apache axis the UserDefinedClass is generated as follows.
public class UserDefinedClassA implements java.io.Serializable {
private java.lang.Object _return;
// There are other methods for setting the attributes,hashCode,equals etc
Now when i try to invoke the method from the client i get this as an error ?
Deserializing parameter 'UserDefinedClass': could not find deserializer for type {http://www.w3.org/2001/XMLSchema}anyType
Appreciate any suggestion.Hi Manohara,
To download the file from SharePoint, I recommend to use the credential for a user who can access the file in SharePoint in the client object model.
NetworkCredential credentials = new NetworkCredential(“username”, “pwd”, “domain”);
ClientContext context = new ClientContext(“http://thesitecollection”);
context.Credentials = credentials;
Best regards.
Thanks
Victoria Xia
TechNet Community Support
Maybe you are looking for
-
Easy Question: Copy pcui_gp/xssfpm from DTR track to local development
Hi Experts, I have to create one custom Web Dynpro program in Local Development. For this program, pcui_gp/xssfpm and pcui_gp/xssutils are needed. NWDI is configured. I can see pcui_gp/xssfpm and pcui_gp/xssutils in one of the DTR tracks. I am not al
-
MLGR - external Mail with text in the body
Hi, I have a little problem. I setup the MLGR-Message as defined in the wiki. It works fine with SBWP. There is the message text in the body. When I send it to an external email-address, then the text is a pdf in the attachment. I'd like to have the
-
Hi Experts, I am developing FI Invoice approval work flow by extending FIPP business object. I have a decision task with APPROVE,CHANGE,REJECT buttons. if the user press CHANGE or REJECT buttons then a pop up should come to enter the reason details.
-
JDeveloper 11g - JSF Custom Validator - Client Side validation question...
Hi all, I've created custom JSF validator. How to trow some client side ValidatorException in javascript? Thanks in advance, s o v i e t
-
What's best "reasonable priced" flash for a 7d (action photos)
I don't mind going used. I need something that will help With indoor warehouse type racing facility's with poor lighting. Www.rc-ops.com