Error while connecting to ECC tables from Crystal

Hello,
I am trying to create a crystal report on the SAP ECC tables directly, when I try to create a new connection from u201CSAP Table, Cluster, or Functionu201D option in crystal reports 2008 I get this error" Logon Failed. Details: you don't have necessary rights to design reports against the SAP system. please contact your administrator"
Now my question is where are my rights missing, is it on BO side or SAP side, I see that I have access to SAP tables when I try to logon through the SAP logon pad it works, I could see the tables.
Please let me know your thoughts.
Thanks

Hi,
part of the ABAP Transports from the SAP Integration Kit are also specific authorization objects. Take a look at the Installation guide for the SAP Integration Kit in the appendix.
Ingo

Similar Messages

  • Error While connecting  to SAP R3 from crystal reports

    Hi Experts,
    I am trying to connect to a SAP R3 from crystal reports, it gives below mentioned error.
    Logon failed.
    Details: CMALLC: rc= 27 > Connect from SAP gateway to RFC server failed
    Connect_PM GWHOST=10.11.12.13, GWSERV=SAPGW12, SYSNR= 12
    Location SAP-gateway on host xyz/sapgw12
    Error timeout during allocate
    TIME Wed Nov 18..
    Release 700
    Component SAP Gateway
    Version 2
    RC 242
    Module gwr3cpic.c
    LINE 1872
    Detail no connect of TP sapdb12 from host 10.11.12.13 after 20 sec
    COUNTER 6
    Please help me to solve this error.
    Regards,
    Ganesh

    Hi
    please ask your network admins if there is a firewall between your CR Designer installation and your SAP R/3 system.
    I assume that you have imported the necessary trsansports in your SAP R/3 system.
    Which kind of driver do you use for the connection to SAP R/3?
    Regards,
    Stratos

  • Error while connecting to SQL SERVER from OWB

    HI All,
    I got the following error while connecting to SQL SERVER from OWB(10gR2).
    1). Created DSN with (GMSCADA)
    2). tnsnames file is updated with the following information
    GMSCADA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.60.29)(PORT = 1433))
    (CONNECT_DATA =
    (SERVICE_NAME = SA)
    3). Tried to connect to SQL SERVER frm OWB
    Username: sa
    password: sa
    host: 172.16.60.29
    port: 1433
    service name: GMSCADA
    schema: sa
    I got the following error, when I click Test Connection:
    ORA-28545: error diagnosed by Net8 when connecting to an agent
    Unable to retrieve text of NETWORK/NCR message 65535
    ORA-02063: preceding 2 lines from OWB_3095
    Regards,
    Kumar.

    Hi David,
    What is Gateway, How I have to setup, Please let me know.
    I tried according to the Demo, But still I am facing the same problem. Which system IP I have to put in the host details.
    Can u please let me know.
    Regards,
    Kumar.

  • Error while connecting to the database from a JSP Page

    Hi,
    I am using a simple JSP page which is based on the sample JSP pages from OTN.
    When I try to connect to my database using the following code:
    InitialContext ic = new InitialContext();
    OracleDataSource ds = (OracleDataSource)ic.lookup("jdbc/OTN9iDS");
    m_connection = ds.getConnection();
    I get the following error:
    Naming exception Error while connecting to the database : javax.naming.NameNotFoundException: jdbc/OTN9iDS not found in JDBCTest-JDBCTestProject-webapp
    Does anybody know wht this is happening?
    Any help would be appreciated
    FRank

    Hi Frank,
    Are you using standalone OC4J or 9iAS ? If you are using standalone OC4J then you need to add a proper data source entry in %OC4J_HOME%j2ee\home\config\data-sources.xml file.
    If you are using 9iAS the you can log in to the Enterprise Manager console and add the data source entry by using wizard provided by 9iAS.
    Ensure the case of the JNDI lookup string, since, it is case sensitive.
    Hope this helps.
    Abhijeet

  • Error while connecting to Access Database from Oracle

    Dear All,
    I'm trying to connect Oracle 9i to Access Database.
    but im getting the below error while executing query.
    ERROR at line 1:
    ORA-28545: error diagnosed by Net8 when connecting to an agent
    NCRO: Failed to make RSLV connection
    ORA-02063: preceding 2 lines from MYSQLi did the following thing through to connect the database.
    1) First i made odbc driver called ODBC1
    2) I create the following file on oracle server C:\oracle\ora9I\hs\admin\initodbc1.ora
    i edit the below thing in initodbc1.ora
    HS_FDS_CONNECT_INFO =ODBC1
    HS_FDS_TRACE_LEVEL = ON3) I made some changes in sqlnet.ora
    SQLNET.AUTHENTICATION_SERVICES= NONE
    before it was *NTS*4) Below are the entries in tnsnames.ora i changed the port from 1521 to 1522 cos 1521 already exists.
    ODBC1.TADAWI.LOC =
      (DESCRIPTION =
        (ADDRESS_LIST =
          (ADDRESS = (PROTOCOL = TCP)(HOST = admin-amc)(PORT = 1522))
        (CONNECT_DATA =
          (SERVER = DEDICATED)
          (SERVICE_NAME = ODBC1)
    ODBC1.WORLD =
      (DESCRIPTION =
         (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.251) (PORT = 1522)
      (CONNECT_DATA =
          (SID = ODBC1)
      (HS=OK)
    )5) Listener file code
    ODBC1 =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = TCP)(HOST = admin-amc)(PORT = 1522))
    LISTENER =
      (DESCRIPTION_LIST =
        (DESCRIPTION =
          (ADDRESS = (PROTOCOL = TCP)(HOST = admin-amc)(PORT = 1521))
        (DESCRIPTION =
          (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC2))
    SID_LIST_LISTENER =
      (SID_LIST =
        (SID_DESC =
          (SID_NAME = PLSExtProc)
          (ORACLE_HOME = C:\oracle\ora9I)
          (PROGRAM = extproc)
        (SID_DESC =
          (GLOBAL_DBNAME = orcl)
          (ORACLE_HOME = C:\oracle\ora9I)
          (SID_NAME = orcl)
         (SID_DESC =
          (PROGRAM = hsodbc)
          (ORACLE_HOME = C:\oracle\ora9I)
          (SID_NAME = ODBC1)
      )6) after that i created
    SQL> CREATE DATABASE LINK MYSQL CONNECT TO XTRACK IDENTIFIED BY XTRACK USING 'ODBC1.WORLD'
    Database link created.7) Listener Status
    LSNRCTL for 32-bit Windows: Version 9.2.0.1.0 - Production on 04-MAR-2012 21:26:16
    Copyright (c) 1991, 2002, Oracle Corporation.  All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=admin-amc)(PORT=1521)))
    STATUS of the LISTENER
    Alias                     LISTENER
    Version                   TNSLSNR for 32-bit Windows: Version 9.2.0.1.0 - Production
    Start Date                04-MAR-2012 20:52:33
    Uptime                    0 days 0 hr. 33 min. 44 sec
    Trace Level               off
    Security                  OFF
    SNMP                      OFF
    Listener Parameter File   C:\oracle\ora9I\network\admin\listener.ora
    Listener Log File         C:\oracle\ora9I\network\log\listener.log
    Listening Endpoints Summary...
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=admin-amc.tadawi.loc)(PORT=1521)))
      (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC2ipc)))
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=admin-amc.tadawi.loc)(PORT=8080))(Presentation=HTTP)(Session=RAW))
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=admin-amc.tadawi.loc)(PORT=2100))(Presentation=FTP)(Session=RAW))
    Services Summary...
    Service "ODBC1" has 1 instance(s).
      Instance "ODBC1", status UNKNOWN, has 1 handler(s) for this service...
    Service "PLSExtProc" has 1 instance(s).
      Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Service "orcl" has 2 instance(s).
      Instance "orcl", status UNKNOWN, has 1 handler(s) for this service...
      Instance "orcl", status READY, has 1 handler(s) for this service...
    Service "orclXDB" has 1 instance(s).
      Instance "orcl", status READY, has 1 handler(s) for this service...
    The command completed successfullyi did exactly what documentation says and it will not through any error but atlast when i try to access the access database tables it give me the below error
    SELECT * FROM DBO_COMPANY@MYSQL
    ERROR at line 1:
    ORA-28545: error diagnosed by Net8 when connecting to an agent
    NCRO: Failed to make RSLV connection
    ORA-02063: preceding 2 lines from MYSQLi'm using Oracle9i Enterprise Edition Release 9.2.0.1.0 any help will appreciate.
    Regards
    Moazam
    Edited by: Moazam Shareef on Mar 4, 2012 10:25 AM

    first of all thanks for your support Mr. Kgronau
    I did what u said but still its giving me below error.
    SQL> SELECT * FROM DBO_PATINS@MYSQL
      2  ;
    SELECT * FROM DBO_PATINS@MYSQL
    ERROR at line 1:
    ORA-12154: TNS:could not resolve service namei re-check the service, and restart the listener as you said below are the logs could you help me to solve this issue plz.
    TNSNAMES.ORA
    # TNSNAMES.ORA Network Configuration File: C:\oracle\ora9I\network\admin\tnsnames.ora
    # Generated by Oracle configuration tools.
    ORCL.TADAWI.LOC =
      (DESCRIPTION =
        (ADDRESS_LIST =
          (ADDRESS = (PROTOCOL = TCP)(HOST = admin-amc)(PORT = 1521))
        (CONNECT_DATA =
          (SERVER = DEDICATED)
          (SERVICE_NAME = orcl)
    ODBC1 =
      (DESCRIPTION =
        (ADDRESS_LIST =
          (ADDRESS = (PROTOCOL = TCP)(HOST = admin-amc)(PORT = 1522))
        (CONNECT_DATA =
          (SERVER = DEDICATED)
          (SERVICE_NAME = ODBC1)
    INST1_HTTP.TADAWI.LOC =
      (DESCRIPTION =
        (ADDRESS_LIST =
          (ADDRESS = (PROTOCOL = TCP)(HOST = admin-amc)(PORT = 1521))
        (CONNECT_DATA =
          (SERVER = SHARED)
          (SERVICE_NAME = MODOSE)
          (PRESENTATION = http://HRService)
    EXTPROC_CONNECTION_DATA.TADAWI.LOC =
      (DESCRIPTION =
        (ADDRESS_LIST =
          (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC2))
        (CONNECT_DATA =
          (SID = PLSExtProc)
          (PRESENTATION = RO)
      )LISTENER.ORA
    # LISTENER.ORA Network Configuration File: C:\oracle\ora9I\NETWORK\ADMIN\listener.ora
    # Generated by Oracle configuration tools.
    LISTENER =
      (DESCRIPTION_LIST =
        (DESCRIPTION =
          (ADDRESS_LIST =
            (ADDRESS = (PROTOCOL = TCP)(HOST = admin-amc)(PORT = 1521))
          (ADDRESS_LIST =
            (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC2))
    ODBC1 =
      (DESCRIPTION_LIST =
        (DESCRIPTION =
          (ADDRESS_LIST =
            (ADDRESS = (PROTOCOL = TCP)(HOST = admin-amc)(PORT = 1522))
    SID_LIST_ODBC1 =
      (SID_LIST =
        (SID_DESC =
          (SID_NAME = ODBC1)
          (ORACLE_HOME = C:\oracle\ora9I)
          (PROGRAM = hsodbc)
        (SID_DESC =
          (GLOBAL_DBNAME = ODBC1)
          (ORACLE_HOME = C:\oracle\ora9I)
          (SID_NAME = ODBC1)
    SID_LIST_LISTENER =
      (SID_LIST =
        (SID_DESC =
          (SID_NAME = PLSExtProc)
          (ORACLE_HOME = C:\oracle\ora9I)
          (PROGRAM = extproc)
        (SID_DESC =
          (GLOBAL_DBNAME = orcl)
          (ORACLE_HOME = C:\oracle\ora9I)
          (SID_NAME = orcl)
      )then i restart both listener entries (ie lsnrctl start ODBC1 and lsnrctl start ) and both are running fine without any error below are the status.
    LSNRCTL for 32-bit Windows: Version 9.2.0.1.0 - Production on 05-MAR-2012 18:42:09
    Copyright (c) 1991, 2002, Oracle Corporation.  All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=admin-amc)(PORT=1521)))
    STATUS of the LISTENER
    Alias                     LISTENER
    Version                   TNSLSNR for 32-bit Windows: Version 9.2.0.1.0 - Production
    Start Date                05-MAR-2012 18:32:15
    Uptime                    0 days 0 hr. 9 min. 56 sec
    Trace Level               off
    Security                  OFF
    SNMP                      OFF
    Listener Parameter File   C:\oracle\ora9I\network\admin\listener.ora
    Listener Log File         C:\oracle\ora9I\network\log\listener.log
    Listening Endpoints Summary...
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=admin-amc.tadawi.loc)(PORT=1521)))
      (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC2ipc)))
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=admin-amc.tadawi.loc)(PORT=8080))(Presentation=HTTP)(Session=RAW))
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=admin-amc.tadawi.loc)(PORT=2100))(Presentation=FTP)(Session=RAW))
    Services Summary...
    Service "PLSExtProc" has 1 instance(s).
      Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Service "orcl" has 2 instance(s).
      Instance "orcl", status UNKNOWN, has 1 handler(s) for this service...
      Instance "orcl", status READY, has 1 handler(s) for this service...
    Service "orclXDB" has 1 instance(s).
      Instance "orcl", status READY, has 1 handler(s) for this service...
    The command completed successfullyLISTENER.ORA ODBC1 status
    LSNRCTL for 32-bit Windows: Version 9.2.0.1.0 - Production on 05-MAR-2012 18:41:52
    Copyright (c) 1991, 2002, Oracle Corporation.  All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=admin-amc)(PORT=1522)))
    STATUS of the LISTENER
    Alias                     ODBC1
    Version                   TNSLSNR for 32-bit Windows: Version 9.2.0.1.0 - Production
    Start Date                05-MAR-2012 18:32:08
    Uptime                    0 days 0 hr. 9 min. 46 sec
    Trace Level               off
    Security                  OFF
    SNMP                      OFF
    Listener Parameter File   C:\oracle\ora9I\network\admin\listener.ora
    Listener Log File         C:\oracle\ora9I\network\log\odbc1.log
    Listening Endpoints Summary...
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=admin-amc.tadawi.loc)(PORT=1522)))
    Services Summary...
    Service "ODBC1" has 1 instance(s).
      Instance "ODBC1", status UNKNOWN, has 2 handler(s) for this service...
    The command completed successfullyWhere hope i'm near to retrive the access data.
    Regards
    Moazam

  • Error while connecting to MDM server from Webdynpro

    Hi ,
       I am trying to connect to MDM server (5.5 SP04 no patches) through a webdynpro application . The following is the piece of code that I am using as a test .
    CatalogData CatalogData = new CatalogData();
        int resultLogin = 0;
        try {
              resultLogin = CatalogData.Login("USNOC01AQ05",2005,"Admin","Erico1234","English [US]");
        }catch(Exception e){
              wdContext.currentContextElement().setValueattr("Not Connected");
             //System.out.println("Error while establishing connection");
        if (resultLogin != RC.RC_OK){
              wdContext.currentContextElement().setValueattr("Not Connected");
             //System.out.println("Error logging to the SDM server");
             //System.exit(-1);
         wdContext.currentContextElement().setValueattr("Connected");
        //System.out.println("MDM server connected");
    The import statements are as follows
    import a2i.common.CatalogData;
    import a2i.generated.RC;
    I have put the following jar files in the java build path
    MDM4J
    mdm-admin
    mdm-common
    mdm-core
    mdm-data
    mdm-protocol
    When I deploy my application I get the following error
    java.lang.NoClassDefFoundError: a2i/common/CatalogData
    It can't be determined from the exception chain, which class loader failed to load the above class. But at least the class loader of the current application does not contain a resource with name 'a2i/common/CatalogData'.
    What do you guys think is the problem ?
    Regards
    DeepaK Singh

    Hi ,
       I found a document which says that MDM4J is the legacy API and is considered deprecated .The MDM Java API is the new one .I have both of them in the java build path . I am not sure if this is that cause of the problem .
    Now I had a look at the javadoc for the new API but I am not able to locate the class to obtain a connection to the MDM server from a custom application being built in Netweaver Developer Studio . Can someone help me out with the same ?What would be the code to obtain the connection to the MDM server with the new JAVA API ?
    Regards
    DeepaK Singh

  • ERROR while connecting to Netezza Database from oracle 10g via dblink.

    Gurus,
    We are trying to connect to Netezza DB from oracle 10g DB.. We successfully establised ODBC connection but unable to retrieve data over the dblink connected from oracle to Netezza. We get this error.. Please HELP ASAP!!!!!!!!
    ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
    Server and/or port attributes are empty {HY000,NativeErr = 33}

    Manik wrote:
    We are trying to connect to Netezza DB from oracle 10g DB.. We successfully establised ODBC connection but unable to retrieve data over the dblink connected from oracle to Netezza. We get this error.. Please HELP ASAP!!!!!!!!
    ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
    Server and/or port attributes are empty {HY000,NativeErr = 33}Always test ODBC client connectivity on the Oracle server to the remote and foreign database, first. Use the isql ODBC client command line interface (as the oracle or grid o/s user).
    If this does not work, then Oracle HSO will also not work.
    Once you have confirmed that this is working, then configure the HSO service for Oracle.
    If that fails, enables ODBC client tracing for that HSO service (in the init file for that service) to see exactly what ODBC calls Oracle is making and which of these are failing.

  • Error while connecting to SAP Server from Windows XP Client.

    Hi,
    I am facing the problem while i am trying to connect my Windows XP Clients( With Service Pack 3, DI-API Installed and Microsoft SQL Server Native Client Installed) to SAP server i got follwoing Error.
    Connection Failed :
    SQL State : '08001'
    SQL Server Error : 233
    [Microsoft][SQL Native Client]Named Pipe Provider Could not open the connection SQL Server [233].
    Connection Failed :
    SQL State : "HYT00"
    SQL Server Error : 0
    [Microsoft][SQL Native Client]Login Timeout Expired
    Connection Failed:
    SQL State :'08001'
    SQL Server Error : 233
    [Microsoft][SQL Native Client]An Error has occured while establishing new connection to the server.
    When connecting SQL Server 2005, this failure may caused by the fact that under the default setting SQL Server does not allow remote connection.
    Regards,
    Arpit Shah

    Hi Arpit,
    Solution of Error in starting B1 after installation should help here too.
    Kind regards
    Mario
    SAP Business One Forums team

  • Error while connecting to Oracle 8 from PI 7.1

    I am trying the connect oracel 8.0 from PI 7.1,
    I am getting following error in communication channel monitoring
    "Exception caught during JDBC adapter processing: java.lang.NullPointerException "
    at the same time I can connect to oracle 10g smoothly without any error.
    Please suggest what would be the reason.
    regards,

    Hi Check this thread
    same problem disueed here & solved
    Error in Sender JDBC communication channel
    Regards
    Abhishek

  • Error while connecting to DB Schema from WebLogic

    1.     I have installed DB 11.2.0.1, run RCU utility to create the schema, IDP_OIF, and Weblogic 10.3.3 on windows 2008 64bit version.
    Then i installed OIM 11.1.1.2 and then applied the patch 11.1.1.3. Post that, i configured Weblogic and created a new domain. After that, i run config.bat file to
    configure OIM 11.1.1.3, and selected OIF and ODSM as components.
    2.     Now, I started the Weblogic (IDMDOMAIN_IDP domain), and trying to create a new DataSource (Services -> DataSource), giving the schema details of IDP_OIF.
    But, I am not able to connect and getting the error. i am getting the below mentioned error, while doing the test configuration.
    <weblogic> <> <063a4f12da2ebf72:-383cc000:13050cfca7e:-8000-000000000000000d> <1307026410976> <BEA-240003> <Console encountered the following error java.sql.SQLException: The Network Adapter could not establish the connection
         at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:74)
         at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:135)
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:203)
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:489)
         at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:439)
         at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:640)
         at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:205)
         at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:35)
         at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:554)
         at oracle.jdbc.pool.OracleDataSource.getPhysicalConnection(OracleDataSource.java:388)
         at oracle.jdbc.xa.client.OracleXADataSource.getPooledConnection(OracleXADataSource.java:645)
         at oracle.jdbc.xa.client.OracleXADataSource.getXAConnection(OracleXADataSource.java:265)
         at oracle.jdbc.xa.client.OracleXADataSource.getXAConnection(OracleXADataSource.java:141)
         at com.bea.console.utils.jdbc.JDBCUtils.testConnection(JDBCUtils.java:550)
         at com.bea.console.actions.jdbc.datasources.createjdbcdatasource.CreateJDBCDataSource.testConnectionConfiguration(CreateJDBCDataSource.java:458)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.apache.beehive.netui.pageflow.FlowController.invokeActionMethod(FlowController.java:870)
         at org.apache.beehive.netui.pageflow.FlowController.getActionMethodForward(FlowController.java:809)
         at org.apache.beehive.netui.pageflow.FlowController.internalExecute(FlowController.java:478)
         at org.apache.beehive.netui.pageflow.PageFlowController.internalExecute(PageFlowController.java:306)
         at org.apache.beehive.netui.pageflow.FlowController.execute(FlowController.java:336)
         at org.apache.beehive.netui.pageflow.internal.FlowControllerAction.execute(FlowControllerAction.java:52)
         at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
         at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.access$201(PageFlowRequestProcessor.java:97)
         at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor$ActionRunner.execute(PageFlowRequestProcessor.java:2044)
         at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors$WrapActionInterceptorChain.continueChain(ActionInterceptors.java:64)
         at org.apache.beehive.netui.pageflow.interceptor.action.ActionInterceptor.wrapAction(ActionInterceptor.java:184)
         at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors$WrapActionInterceptorChain.invoke(ActionInterceptors.java:50)
         at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors$WrapActionInterceptorChain.continueChain(ActionInterceptors.java:58)
         at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors.wrapAction(ActionInterceptors.java:87)
         at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processActionPerform(PageFlowRequestProcessor.java:2116)
         at com.bea.console.internal.ConsolePageFlowRequestProcessor.processActionPerform(ConsolePageFlowRequestProcessor.java:261)
         at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
         at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:556)
         at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:853)
         at org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:631)
         at org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:158)
         at com.bea.console.internal.ConsoleActionServlet.process(ConsoleActionServlet.java:256)
         at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
         at com.bea.console.internal.ConsoleActionServlet.doGet(ConsoleActionServlet.java:133)
         at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1199)
         at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:686)
         at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.processActionInternal(ScopedContentCommonSupport.java:142)
         at com.bea.portlet.adapter.scopedcontent.PageFlowStubImpl.processAction(PageFlowStubImpl.java:106)
         at com.bea.portlet.adapter.NetuiActionHandler.raiseScopedAction(NetuiActionHandler.java:111)
         at com.bea.netuix.servlets.controls.content.NetuiContent.raiseScopedAction(NetuiContent.java:181)
         at com.bea.netuix.servlets.controls.content.NetuiContent.raiseScopedAction(NetuiContent.java:167)
         at com.bea.netuix.servlets.controls.content.NetuiContent.handlePostbackData(NetuiContent.java:225)
         at com.bea.netuix.nf.ControlLifecycle$2.visit(ControlLifecycle.java:180)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:324)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
         at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:130)
         at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:395)
         at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361)
         at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:352)
         at com.bea.netuix.nf.Lifecycle.runInbound(Lifecycle.java:184)
         at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:159)
         at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:388)
         at com.bea.netuix.servlets.manager.UIServlet.doPost(UIServlet.java:258)
         at com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:199)
         at com.bea.netuix.servlets.manager.SingleFileServlet.service(SingleFileServlet.java:251)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at com.bea.console.utils.MBeanUtilsInitSingleFileServlet.service(MBeanUtilsInitSingleFileServlet.java:47)
         at weblogic.servlet.AsyncInitServlet.service(AsyncInitServlet.java:130)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: oracle.net.ns.NetException: The Network Adapter could not establish the connection
         at oracle.net.nt.ConnStrategy.execute(ConnStrategy.java:334)
         at oracle.net.resolver.AddrResolution.resolveAndExecute(AddrResolution.java:425)
         at oracle.net.ns.NSProtocol.establishConnection(NSProtocol.java:646)
         at oracle.net.ns.NSProtocol.connect(NSProtocol.java:212)
         at oracle.jdbc.driver.T4CConnection.connect(T4CConnection.java:1076)
         at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:303)
         ... 99 more
    Caused by: java.net.ConnectException: Connection refused: connect
         at java.net.PlainSocketImpl.socketConnect(Native Method)
         at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:351)
         at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:213)
         at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:200)
         at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
         at java.net.Socket.connect(Socket.java:529)
         at oracle.net.nt.MetricsEnabledSocket.connect(TcpNTAdapter.java:465)
         at oracle.net.nt.TcpNTAdapter.connect(TcpNTAdapter.java:134)
         at oracle.net.nt.ConnOption.connect(ConnOption.java:130)
         at oracle.net.nt.ConnStrategy.execute(ConnStrategy.java:310)
         ... 104 more
    please help.
    Thanks in advance.

    hi Guru's.. please advice.

  • TS1368 Error while connect to iTunes store from iPad 3

    Hello! I am from Russia. I can't connect to iTunes store from my iPad 3 device. Message is "Не удается подключиться к iTunes Store". That's all... There is no detail information. My wi-fi Internet connection is work fine.

    Hi Robby18,
    Here is an article of recommended troubleshooting steps for iTunes Store connection issues:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    See the section labeled "Troubleshooting on an iPhone, iPad, or iPod touch."  If the issue isn't resolved, there are 2 additional articles linked in "Additional Information" that may provide additional ideas.
    Cheers!
    - Ari

  • Error while connecting to ECC using JCO3 connection

    Hi,
    I am getting an error when using JCO3 for connection. I have specified the connection string and created the destination object.
    I get a null pointer exception while setting the import parameter for the RFC. the error is as shown below.
    java.lang.NullPointerException:
    while trying to invoke the method
    com.sap.conn.jco.JCoFunction.getImportParameterList() of a null object loaded
    from local variable 'function'
    the sample code is as follows:-
    destination =JCoDestinationManager.getDestination("ECC destinaton");
    function = destination.getRepository().getFunction("RFC name");
    function.getImportParameterList().setValue("import parameter name", import parameter value);
    function.execute(destination);
    the errror occurs at the line highlighted in red.
    Quick response appreciated.

    Hi,
    part of the ABAP Transports from the SAP Integration Kit are also specific authorization objects. Take a look at the Installation guide for the SAP Integration Kit in the appendix.
    Ingo

  • Error while deploying a PAR file from NWDS into an ECC.

    Hi all,
    I am getting this error while deploying a PAR file from NWDS into an ECC.
    Operation Failed: Please make sure the server is running or check the log (sap-plugin.log) for
    more detail.
    My server is running properly
    1 - Where is sap-plugin.log file? I don´t find it. 
    2 - Could there be another file with another name with information about the error?
    3 - Is there another way to deploy the file directly from the ECC?
    Regards,

    Hi,
    Just make sure you have maintained correct server setting to check the same open the NWDS and follow this path
    Windows/ Prefereces / SAP Enterprise Portal
    Check the following enteries
    Alias
    Host
    Port
    Login etc.
    Regards,

  • HTTP/1.1 302 error while connecting UCM server from ODC Commit profile

    Hi Team,
    We are getting HTTP/1.1 302 error while connecting UCM server from ODC Commit profile.
    Error Code
    oracle.stellent.ridc.protocol.http.HttpProtocolException: Http/1.1 302
    Please note that target UCM is SSO enabled.
    Regards,
    Piyush

    I am having a similar problem.
    Have you been able to figure out what the issue is and/or what the library location should be?

  • Infrequent Error while connection application from Workspace

    In HFM Workspace (9.3.1) some users are getting the following error while connecting to application. The error is infrequent.
    " Please make sure that the Application you are trying to launch is registered with SharedSerivces. SharedServices must be running for the feature you are trying to access. Close the browser window and try logging into workspace again after a little while. Contact your administrator for further information.'
    Shared service is running fine and the users are able to connect to application after they close the browser and try again. Has any one experienced this?

    You might want to try applying HSS 9.3.1 Service fix 12
    this addressed the following two issues.
    7595698 – “Registered app is not active …” error. Active Financial Management application is sometimes listed as inactive.
    7586480 –Inactive Planning applications. After about 30 minutes, Planning applications in User Management Console are listed in inactive status.

Maybe you are looking for