Error While Connecting XL Report

Hai To All,
When i connecting XL Report it showing the following error...
"Unable To connect To DI.
This Database server type is not supported"
Regards,
Anitha

Ji,
Thanks for ur reply....
Can u tell me where to download that patch.
Regards,
Anitha

Similar Messages

Error while Connecting report Best Practices v1.31 with SAP

Hello experts,
I'm facing an issue while trying to connect some of my reports from Best Practices for BI with SAP.
It only happens when it's about info sets, the other ones that are with SAP tables go smoothly without a problem.
The most interesting is I have already one of the reports connected to SAP info sets.
I have already verified the document of steps of creation of additional database that comes with BP pack. They seem ok.
Here goes what Crystal Reports throws to me after changing the data source to SAP:
For report "GL Statement" one of the Financial Analysis one which uses InfoSet: /KYK/IS_FIGL_I3:
- Failed to retrieve data from the database; - click ok then...
- Database connector error: It wasn't indicated any variant for exercise (something like this after translating) - click ok then
- Database connector error: RFC_INVALID_HANDLE
For report "Cost Analysis: Planned vs. Actual Order Costs" one of the Financial Analysis one which uses InfoSet: ZBPBI131_INFO_ODVR and ZBPBI131_INFO_COAS; and also the Query CO_OM_OP_20_Q1:
- Failed to retrieve data from the database; - click ok then...
- Database connector error: check class for selections raised errors - click ok then
- Database connector error: RFC_INVALID_HANDLE
Obs.: Those "Z" infosets are already created in SAP environment.
The one that works fine is one of the Purchasing Analysis reports:
- Purchasing Group Analysis -> InfoSet: /KYK/IS_MCE1
I'm kind of lost to solve this, because I'm not sure if it can be in the SAP JCO or some parameter that was done wrongly in SAP and I have already check possible solutions for both.
Thanks in advance,
Carlos Henrique Matos da Silva - SAP BusinessObjects BI - Brazil.

I re-checked step 3.2.3 - Uploading Crystal User Roles (transaction PFCG) - of the manual where it talks about CRYSTAL_ENTITLEMENT and CRYSTAL_DESIGNER roles, I noticed in the Authorizations tab that the status was saying it hadn't been generated and I had a yellow sign, so then that was what I did (I generated) as it says in the manual.
Both statuses are now saying "Authorization profile is generated" and the sign is now green on the tab.
I had another issue in the User tab (it was yellow as Authorizations one before generating)....all I needed to do to change to green was comparing user (User Comparison button).
After all that, I tried once more to refresh the Crystal report and I still have the error messages being thrown.
There's one more issue in one of the tabs of PFCG transaction, it is on the Menu one where it is with a red sign, but there's nothing talking about it in the manual. I just have a folder called "Role menu" without anything in it.
Can it be the reason why I'm facing errors when connecting the report to SAP infoSets? (remember one of my reports which is connected to an infoSet works good)
Thanks in advance,
Carlos Henrique Matos da Silva - SAP BusinessObjects BI - Brazil.

Error while opening the report.

hi,
Some time i am getting "500 Internal Server Error',while executing the report.Please check the following exception and give the possible reason for getting this kind of problem.
 500 Internal Server Error
BEx Web Application
Failed to process request. Please contact your system administrator.
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator.
To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
Termination message sent
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
com.sap.ip.bi.base.application.exceptions.AbortMessageRuntimeException: Termination message sent
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessageInternal(MessageManager.java:148)
at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessage(MessageManager.java:113)
Messages
ABEND: Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
ABEND: Error in BW:
System Environment
Server
BI Java Release: 7 - Patch level: 0000000009 - Description: BI Web Applications Java - Additional info: - Production mode: true
BI ABAP Release: 700 - Patch level: 0009 - Description: SAP NetWeaver BI 7.0 (BIPCLNT300) - Additional info: - Production mode: true
Java Virtual Machine Classic VM - IBM Corporation - 1.4.2
Operating System AIX - ppc64 - 5.3
Context
ACCESSIBLE false
BEx Runtime Version 1
CACHE true
CONTENT_PADDING true
COUNTRY
DEBUG false
DEBUG_LEVEL 0
DEBUG_MESSAGES false
Initial Query String BUILDTREE=false&NAVIGATIONTARGET=navurl%3A%2F%2F7b8b73fe5fd57ae6c5c1a24aed5d1ac4&NAVPATHUPDATE=false&RELATIVENAVBASE=&SAP-LAFVERSIONS=portal%3A7.0.9.0.1%3Bur%3A7.0.9.0.1&SAP-PP-CONSUMERBASEURL=3A80&SAP-PP-PRODUCERID=com.lenovo.BIP_Lenovosap&TEMPLATE=Z_WEB_CR_ZCRMOPPI_Q0032&THEME=LenovoBlueTwo
LANGUAGE en
Master System Alias BIPCLNT300
PROFILING false
RTL false
Request URL http
SAP_BW_IVIEW_ID pcd:portal_content/d029033/com..BI_Reports/com.BI_Analytics/Z_WEB_CR_ZCRMOPPI_Q0032
SAP_EXTERNAL_SID CLGF6EORaEN7Vivt8TVaQw==3eTBxzbQZSMLxB4o3h9+7w==
THEME_NAME LenovoBlueTwo
TRACE false
TRAY_TYPE PLAIN
Time Thu Oct 04 03:14:20 PDT 2007
User EPSUPPORT (USER.R3_DATASOURCE.EPSUPPORT)
Full Exception Chain
Log ID 00145ED13086005200000889000C719A00043BA80CB04B89
com.sap.ip.bi.webapplications.runtime.controller.MessageException: Error during conversion of the Web template "Z_WEB_CR_ZCRMOPPI_Q0032 from the master system at com.sap.ip.bi.webapplications.runtime.impl.Page.processRequest(Page.java:2055) at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.doProcessRequest(Controller.java:841) at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.processRequest(Controller.java:775) at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService.handleRequest(BIRuntimeService.java:412) at com.sap.ip.bi.webapplications.runtime.jsp.portal.components.LauncherComponent.doContent(LauncherComponent.java:21) at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java(Compiled Code)) at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java(Compiled Code)) at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java(Compiled Code)) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java(Compiled Code)) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java(Compiled Code)) at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java(Compiled Code)) at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:646) at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java(Compiled Code)) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java(Compiled Code)) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java(Compiled Code)) at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753) at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240) at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java(Compiled Code)) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java(Compiled Code)) at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code)) at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java(Compiled Code)) at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code)) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java(Compiled Code)) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java(Compiled Code)) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java(Inlined Compiled Code)) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java(Compiled Code)) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java(Compiled Code)) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java(Compiled Code)) at com.sap.engine.services.httpserver.server.Client.handle(Client.java(Inlined Compiled Code)) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java(Compiled Code)) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java(Compiled Code)) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java(Compiled Code)) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code)) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code))Caused by: com.sap.ip.bi.base.exception.BIBaseRuntimeException: Error during conversion of the Web template "Z_WEB_CR_ZCRMOPPI_Q0032 from the master system at com.sap.ip.bi.webapplications.runtime.jsp.portal.service.template.PortalTemplateAccessService.getTemplateContent(PortalTemplateAccessService.java:93) at com.sap.ip.bi.webapplications.runtime.preprocessor.Preprocessor.parseTemplate(Preprocessor.java:161) at com.sap.ip.bi.webapplications.runtime.xml.XmlTemplateAssembler.doInit(XmlTemplateAssembler.java:81) at com.sap.ip.bi.webapplications.runtime.template.TemplateAssembler.init(TemplateAssembler.java:118) at com.sap.ip.bi.webapplications.runtime.base.Template.doInit(Template.java:105) at com.sap.ip.bi.webapplications.runtime.base.PageObject.init(PageObject.java:232) at com.sap.ip.bi.webapplications.runtime.base.Container.init(Container.java:46) at com.sap.ip.bi.webapplications.runtime.impl.Page.initPageObject(Page.java:3226) at com.sap.ip.bi.webapplications.runtime.impl.Page.createPageObject(Page.java:3427) at com.sap.ip.bi.webapplications.runtime.impl.Page.setTemplate(Page.java:4355) at com.sap.ip.bi.webapplications.runtime.impl.Page.doSetTemplateCommand(Page.java:4091) at sun.reflect.GeneratedMethodAccessor293.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.ip.bi.util.MethodInvoker.callMethod(MethodInvoker.java:101) at com.sap.ip.bi.webapplications.runtime.command.CommandProcessorHelper.processCommand(CommandProcessorHelper.java:410) at com.sap.ip.bi.webapplications.runtime.command.CommandProcessorHelper.processCommand(CommandProcessorHelper.java:325) at com.sap.ip.bi.webapplications.runtime.base.CommunicationProcessor.processCommand(CommunicationProcessor.java:144) at com.sap.ip.bi.webapplications.runtime.impl.Page.processCommandInternal(Page.java:1418) at com.sap.ip.bi.webapplications.runtime.impl.Page.processCommandSequence(Page.java:1713) at com.sap.ip.bi.webapplications.runtime.impl.Page.doProcessRequest(Page.java:2424) at com.sap.ip.bi.webapplications.runtime.impl.Page.processRequest(Page.java:1977) ... 38 moreCaused by: com.sap.ip.bi.deploytime.BIBaseRareSystemException: BI runtime subsystem error: Retrieve MetadataResources Failed1.4.2com.sap.ip.bi.deploytime.metadataresourcecache.MetadataResourceCache:initialize Note call hierarchy at com.sap.ip.bi.deploytime.metadataresourcecache.MetadataResourceCache.initialize(MetadataResourceCache.java:212) at com.sap.ip.bi.deploytime.BISP2Jsp.transformDTT(BISP2Jsp.java:1130) at com.sap.ip.bi.deploytime.BISP2Jsp.convert(BISP2Jsp.java:497) at com.sap.ip.bi.webapplications.runtime.jsp.portal.service.template.PortalTemplateAccessService.getTemplateContent(PortalTemplateAccessService.java:88) ... 59 moreCaused by: com.sap.ip.bi.base.application.exceptions.AbortMessageRuntimeException: Termination message sent ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION MSGV1: SAPMSSY1 MSGV3: UNCAUGHT_EXCEPTION at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessageInternal(MessageManager.java:148) at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessage(MessageManager.java:113) at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessageInternal(MessageManager.java:144) at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessage(MessageManager.java:113) at com.sap.ip.bi.base.application.service.RfcService.fillMessages(RfcService.java:221) at com.sap.ip.bi.base.application.service.RfcService.doPostProcessing(RfcService.java:171) at com.sap.ip.bi.base.application.service.rfcproxy.impl.RfcFunction.execute(RfcFunction.java(Compiled Code)) at com.sap.ip.bi.deploytime.service.validation_metadata.impl.ValidationMetadataService.getTransformData(ValidationMetadataService.java:53) at com.sap.ip.bi.deploytime.metadataresourcecache.MetadataResourceCache.initialize(MetadataResourceCache.java:196) ... 62 more
Regards,
Ravi.M

hi,
 Any suggestion for the above query.
here i am using federated portal concept,once i am opening this report in the portal only i am facing the above problem.
Regards,
Ravi.M

Error while uploading SSRS Reports to SharePoint Report Library

Dear All,
I am having a SSRS Server running in SharePoint integrated mode and I am running reports in SharePoint successfully, but I am facing issue with one site as shown below.
I am getting below error while uploading a report to specific path as shown below;
I can upload to any link but not for the below link shows /departments/ocean
I checked my ReportServer paths from RS Configuration Manager and I cannot find that defined path there. But I can see all other links are registered()
Note: Below shows my web applications in SharePoint farm(four web sites). I have define paths(site collections) only in default web application, not in other webs which has a port number.
I am not sure how the RS Configuration Manager picks thoae Define Manage Path in site collections.
But I think, it should pick department site collections as well.
Could you please guide me how to rectify above error?
ASP.Net, C#.Net, SQL Server ,Win32

Hi,
I recommend to check you can connect to the site collection in Report Builder.
If not, please check if you have permission to access the site collection.
Please also check if the Report Server Integration Feature is activated in the site collection.
To narrow the issue scope, I recommend to create a new site collection using the departments path in SharePoint to see if the issue still occurs.
As a workaround, you can also save the report to local drive and then upload it to SharePoint library using Upload Document button in the ribbon in SharePoint library.
In the meanwhile, you can post your question to the forum for SSRS: http://social.technet.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlreportingservices.
More experts will assist you, then you will get more information relation to SSRS.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Error while executing the report to display on the web in BI 7.0?

Hi All,
In BI 7.0, Getting Error while executing the report to display on the web?
The error message displayed is:
" Network Access Message : The website cannot be found ".
Source: DNS error.
Why this error is coming.
Wht needs to be done.
Thanks in Advance.

Hi Kishore,
All the configurations are in proper shape.
We need to change any IP adresses or proxy settings in the Internet explorer (Tools -> Internet options -> Connections -> LAN settings -> etc.,)
Do We need to configure any server address for getting the output to display on web pages in BI 7.0.
EP is not configured over here. Is that causing the problem.
Thansk in Advance.

Database Error while refreshing webi report

Hi,
I am getting following error while refreshing webi report. And also all my scheduled webi reports are getting failed because of same issue. What would be the reason for this error.
Regards,
PRK

Hi Praveen,
As you are getting error 'IES10901' it is related to database connection issue.
Find below link it might help you.
Database error in Web I ( BO 4.0)
check your universe connections to DB(ODBC connections).
Regards,
Samatha B.

WIS 10901 error while running WEBI Report but no error in the DESKI report

Hi,
Can anyone please help me to resolve this issue.
we have recently migrated BOXIR2 - BOXI3.1. many of the reports are from SQL Server and Oracle databases.
Oracle Database connection universe reports error:
i'm getting WIS 10901 error while running WEBI report for some particular objects not for all the objects but the same time i could able to pull the same object in the DESKI.
those particular objects having lenthy data's for ex:100 bytes. but i tried same 100bytes some other objects refreshing fine and displaying results.
i don't know where we ar missing.
SQL Server Connection universe reports:
These reports are giving mismatched results from the original but the callculation are done by the reporter side by creating variables. other than that there are no issues with these reports.
Please we are struggling lot on these issues, can anyone please help us.

Hi,
For your issue 2 check whether any filters used in XI R2 are missing in XI R3. As during migration some filetrs might be missed. To check this in slice and dice panel in both bo versions.
Cheers,
Suresh Aluri.

Error while connecting MYSQL Database

Hi,
I use a 30 days trial of Crystal Reports 2008. When i try to connect with the database i always get the next error: [http://www.visiscan.nl/error.jpg]
The database is 4.1GB large and there is 10GB free space on the database.
Anybody can tell me what to do?

Hi Tom,
As I understand the error while connecting to database is
u201CFailed to retrieve data from databaseu201D
There could be some could be multiple reasons for this.
If you are using an ODBC connection then try to check the DSN. Recreate the same and then try.
If the database is oracle check if native client is installed and try to ping from the native client to check if it responds.
When connecting to Oracle, ensure that the Service name is identical to that used in the <ORA_HOME>/network/admin/tnsnames.ora file on the BusinessObjects XI Release 2 server.
For ODBC databases, ensure that the ODBC DSN is exactly the same in the ODBC Manager as on the BusinessObjects XI Release 2 server.
Please let us know if this helps
Regards,
Aditya Joshi

Error while connecting to DB's - java.lang.NullPointerException

I am getting this error while connecting to any db using SQL dev.
1. I was able to connect to all before something happaned (unrealted install/uninstalls)
2. I also have two errors in the "Logging Page- Log" window
I have seen this errors in other threads, but dont think thay have a resolution to this.
Let me know if any other info is required and I will append to this thread.
-MAIN ERROR-
java.lang.NullPointerException
     at oracle.dbtools.raptor.conntypes.RaptorClassLoader.findClassLoader(RaptorClassLoader.java:48)
     at oracle.dbtools.raptor.conntypes.RaptorConnectionWrapper.createConnectionImpl(RaptorConnectionWrapper.java:213)
     at oracle.dbtools.raptor.conntypes.RaptorConnectionWrapper.createConnection(RaptorConnectionWrapper.java:171)
     at oracle.dbtools.raptor.conntypes.RaptorConnectionWrapper.getJdbcConnection(RaptorConnectionWrapper.java:202)
     at oracle.dbtools.raptor.conntypes.RaptorConnectionWrapper.getPresentation(RaptorConnectionWrapper.java:68)
     at oracle.dbtools.raptor.utils.Connections$ConnectionInfo.createConnection(Connections.java:1004)
     at oracle.dbtools.raptor.utils.Connections$ConnectionInfo$ConnectRunnable.doWork(Connections.java:876)
     at oracle.ide.dialogs.ProgressRunnable.run(ProgressRunnable.java:159)
     at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:553)
     at java.lang.Thread.run(Thread.java:619)
-Two ERRORs in the log window-
1 ------------------
SEVERE     88     0     oracle.jdbc.driver.OracleDriver     Error while registering Oracle JDBC Diagnosability MBean.
2---------------
SEVERE     95     63     oracle.ideimpl.extension.AddinManagerImpl     Failed to create addin oracle.report.addin.ReportAddin
Thanks
-SJ

Interestingly when I go to Preferences/Database I get this error:
Internal Error when attempting to create this panel: - Do you think I should just reinstall the whole thing?
java.lang.NullPointerException
     at oracle.dbtools.raptor.config.AdvancedInfo.onEntry(AdvancedInfo.java:40)
     at oracle.ide.panels.MDDPanel.enterTraversableImpl(MDDPanel.java:921)
     at oracle.ide.panels.MDDPanel.enterTraversable(MDDPanel.java:894)
     at oracle.ide.panels.MDDPanel.mav$enterTraversable(MDDPanel.java:104)
     at oracle.ide.panels.MDDPanel$Tsl.updateSelectedNavigable(MDDPanel.java:1343)
     at oracle.ide.panels.MDDPanel$Tsl.updateSelection(MDDPanel.java:1211)
     at oracle.ide.panels.MDDPanel$Tsl.actionPerformed(MDDPanel.java:1205)
     at javax.swing.Timer.fireActionPerformed(Timer.java:271)
     at javax.swing.Timer$DoPostEvent.run(Timer.java:201)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:597)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:273)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:183)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:177)
     at java.awt.Dialog$1.run(Dialog.java:1045)
     at java.awt.Dialog$3.run(Dialog.java:1097)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.awt.Dialog.show(Dialog.java:1095)
     at java.awt.Component.show(Component.java:1422)
     at java.awt.Component.setVisible(Component.java:1375)
     at java.awt.Window.setVisible(Window.java:806)
     at java.awt.Dialog.setVisible(Dialog.java:985)
     at oracle.bali.ewt.dialog.JEWTDialog.runDialog(Unknown Source)
     at oracle.bali.ewt.dialog.JEWTDialog.runDialog(Unknown Source)
     at oracle.ide.dialogs.WizardLauncher.runDialog(WizardLauncher.java:55)
     at oracle.ide.panels.TDialogLauncher.showDialog(TDialogLauncher.java:202)
     at oracle.ide.config.IdeSettings.showDialog(IdeSettings.java:795)
     at oracle.ide.config.IdeSettings.showDialog(IdeSettings.java:580)
     at oracle.ide.cmd.IdeSettingsCommand.doit(IdeSettingsCommand.java:47)
     at oracle.ide.controller.CommandProcessor.invoke(CommandProcessor.java:265)
     at oracle.ide.controller.IdeAction.performAction(IdeAction.java:571)
     at oracle.ide.controller.IdeAction$2.run(IdeAction.java:804)
     at oracle.ide.controller.IdeAction.actionPerformedImpl(IdeAction.java:823)
     at oracle.ide.controller.IdeAction.actionPerformed(IdeAction.java:521)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
     at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
     at javax.swing.AbstractButton.doClick(AbstractButton.java:357)
     at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1220)
     at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:1261)
     at java.awt.Component.processMouseEvent(Component.java:6041)
     at javax.swing.JComponent.processMouseEvent(JComponent.java:3265)
     at java.awt.Component.processEvent(Component.java:5806)
     at java.awt.Container.processEvent(Container.java:2058)
     at java.awt.Component.dispatchEventImpl(Component.java:4413)
     at java.awt.Container.dispatchEventImpl(Container.java:2116)
     at java.awt.Component.dispatchEvent(Component.java:4243)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4322)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3986)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3916)
     at java.awt.Container.dispatchEventImpl(Container.java:2102)
     at java.awt.Window.dispatchEventImpl(Window.java:2440)
     at java.awt.Component.dispatchEvent(Component.java:4243)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:273)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:183)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:173)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:168)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:160)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:121)

I get the following error message and don't know how to correct it: Sync encountered an error while connecting: Unknown error, Please try again.

I get the following error message and don't know how to correct it: Sync encountered an error while connecting: Unknown error, Please try again.

There have been problems reported with Sync.
They are working on it, so please try again later when those problems are fixed.
*https://services.mozilla.com/status/
*http://twitter.com/#!/mozservices

I keep getting this message "Sync encountered an error while connecting: Failed to connect to the server. Please try again" What's the problem in English

I keep getting this message "Sync encountered an error while connecting: Failed to connect to the server. Please try again" What's the problem in English

Hi,
Sometimes the server is not available and you can get an error like this one. Usually it works if you try to sync later. If this doesn't work, take a look to [https://philikon.wordpress.com/2011/06/13/how-to-file-a-good-sync-bug/ this post] to learn how to report a bug.
Let me know if this is helpful.

Error while running a report

Hi all,
I am getting this particular error while running a report. The error is:
SQL Error: 604
System error in program SAPLRRK0 and form RSRDR;SRRK0F30-01-
Diagnosis
This internal error is a targeted termination since the program has an
incorrect status.
Procedure
Analyse the situation and inform SAP.
Notification Number BRAIN 299 
Could anyone tell me what that means?
Thanks In advance,
Raj

Hi Raj,
There are a few OSS Notes for your issue.
If your Query has hierarchy in it then check 734184
If your query is based on Infoset then check Note 784502 and 701941.
Also check 668921.
Bye
Dinesh

Error while opening a report in FRstudio client machine.

Hi,I'm getting below error while opening a report in FRstudio client machine. please help me if any of you resolved this issue earlier.
client laptop: 64bit windows7
hyperion version: 11.1.2.2
error msg:
"HARSnapin Initialize() Error -2147467259 - ; nested exception is:
java.rmi.UnmarshalException: error unmarshalling return; nested exception is:
java.io.InvalidClassException: com.hyperion.reporting.graphics.GridObject; local class incompatible: stream classdesc serialVersionUID = 5432192847655595077, local class serialVersionUID = -5245705824007679661"
thanks

I've seen umarshalling error when there is a difference between the client and server version. Is there a patch applied? I would recommend to uninstall the existing one and install if from Workspace. (this will ensure that you've the correct client version)
Regards
Celvin
http://www.orahyplabs.com

Error while running the Report

Hi ,
I am trying to run the Report in Bex Analyzer. and once I enter the value for the variable, it gives me message that "Element is not correctly define (please check query)" and when i click on the error it gives me detail message as below :
Diagnosis
Additional elements that do not have the same dimension, such as quantities and amounts or amounts and ratios, are added to element Sales Qty Gallons .
Procedure
Check your definition.
If you still want to use this addition, you can suppress the dimensionality of one or both subexpressions by using the 'NODIM' operator. The system then interprets this or these subexpressions as nondimensional numbers.
In the executed query, you can use the Key Figure Definition function to analyze element Sales Qty Gallons .
Now the thing is I am already using "NODIM" operator to add those elements. and I m not sure why this error is coming up now because I have created this query a while ago and it wasnt giving me any error at that time but now I have make some changes into it and it;s giving me this error while running the Report. But the thing is I didnt change anything in the element for which it;s showing me error.
Thanks,
Naitik

Naitik,
There are two or more key figures in your report. They are defined by different dimensions and somewhere you have a formula with both these key figure.
Edit your query and select the Check Query icon. It will tell you which calculation you have the problem with. Edit this calculation to see which key figures are present.
If the formula is logically correct, best thing to do is to put a NODIM( ) on your key figures that make up the formula, and then change you formula to look at the NODIM( ) version.
That will fix things for you,
Regards
Gill

Error while generating the report on Test env (for divide condition)

Hi All,
I am facing the below error while generating the report in test environment while the same report is working fine on Prod environment.
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 16001] ODBC error state: S1000 code: 1791 message: [Oracle][ODBC][Ora]ORA-01791: not a SELECTed expression. [nQSError: 16001] ODBC error state: S1000 code: 1791 message: [Oracle][ODBC][Ora]ORA-01791: not a SELECTed expression. [nQSError: 16015] SQL statement execution failed. (HY000)
Actually the error is coming for the below logics:
COUNT(DISTINCT RMA.RMA)/COUNT(DISTINCT User."User Name")
"RMA Fact"."Module Backlog"/COUNT(DISTINCT User."User Name")
Can anyone please tell if I need to make any configuration changes as the same logic works perfectly fine on production but not on test.
Thanks in advance

Is anyone having any idea about it...

Error While Connecting XL Report

Similar Messages

Maybe you are looking for