Error while consolidating. The operation could not be completed.

Error while consolidating. The operation could not be completed. Cocoa error 13. (null)
Got this when I was trying to consolidate some referenced photoshop files. If failed to create a new version as well when I tried to open the files in Photoshop. I rebuilt the the library and it displays and exports both masters and version just fine, but it won't let me consolidate the master to the library.
What gives?

I think that error was due to the fact that I hadn't upgraded MAC OSX after installing it. I have done that now and now I get another error saying the masters are offline.
I found this old thread: https://discussions.apple.com/thread/1965601?start=0&tstart=0 which seems to be the same problem. This is a whole other topic so I will start a new thread, but leave this in case anyone gets the same problem as me. Upgrade your OSX. That's the solution :-)

Similar Messages

  • When restoring an iPhoto library I got an "unexpected error" message and the operation could not be completed. Is my best choice to try again?

    One of my external hard drives died. I had several iPhoto libraries in it. Fortunately, I used Time Machine to backup to a Time Capsule and I can see all the iPhoto library icons in Backups.
    When restoring the first iPhoto library, after three hours, I got an "unexpected error" message and the operation could not be completed. Indeed, the restored library is smaller than the library in Backups. Is my best choice to try again and replace the restored library (which apparently must be missing some photos)? It would mean another 3 hours plus of restoration with fingers crossed...
    Any suggestions? Thank you in advance!

    I am always suspicious of using a different OS to the one that was used to run the backup.. ie if you used Snow L to backup then there is absolutely nothing wrong with using SL to restore.
    Mount the TC sparsebundle and verify it using disk utility.
    A5 here. http://pondini.org/TM/Troubleshooting.html
    You might also like to load the widget in Time Machine so you get whatever the full error message is..
    I cannot find any reference to the error code you are getting..
    My recommendation would be to try it on a different computer.. restore the whole backup to an external drive large enough to accept the whole backup.
    Use the manual methods pondini recommends.
    http://pondini.org/TM/FAQ.html
    Q16 17
    Use ethernet only. Turn off wireless so it does not enter the situation.

  • Error while consolidating (The operation couldn't be completed. Permission denied)

    I have just bought a new MacBook and that has given me extra harddrive space, and now I am trying to consolidate some masters in Aperture, that I have on my Time Capsule. But I get this error:
    Error while consolidating (The operation couldn’t be completed. Permission denied)
    I can access my Time Capsule in Finder perfectly well. Can anyone help?

    I think that error was due to the fact that I hadn't upgraded MAC OSX after installing it. I have done that now and now I get another error saying the masters are offline.
    I found this old thread: https://discussions.apple.com/thread/1965601?start=0&tstart=0 which seems to be the same problem. This is a whole other topic so I will start a new thread, but leave this in case anyone gets the same problem as me. Upgrade your OSX. That's the solution :-)

  • When i do file, save for web, i get an error that says " the operation could not be completed. The system cannot find the path specified." What can fix this?

    when i finish a file and try to "save for web", i get an error box saying The operation cannot be completed. The system cannot find the path Specified.
    What can i do or where do i look?

    ELEMENTS 12 AND ELEMENTS 13
    Upgraded to 13 Thinking might resolve the issue.
    Was working fine up until we had "Tech" come in the office and "up grade some stuff"
    then all of a sudden i started getting this message, something happened but i don't have a clue what.

  • "The operation could not be completed" Error

    Every time i try to open the pixel bender filter I get an error that says "The operation could not be completed" Any Ideas?  Windows 7 i5 processor and 8 gb of ram. I tried re installing, and several images from small to max size.
    Thanks

    Perhaps your issue has been resolved by now.  I read all the responses as I was also having the Error:
    The operation could not be completed." message and this is how I resolved it.  I have Win XP with
    3Gb Ram,and the same graphics card you referenced, by Nvidia.  I looked as the document size and it was at 370 dpi so I dropped it down to 72 and saved it.  Then I had no problem opening Pixel Bender and using the various filters in it.

  • PS CS5 The operation could not be completed. A file system I/O error has occurred

    Howdy...
    I'm using Photoshop CS5 and when I go to use a handful of filters such as Liquify or Lens Correction I am suddenly getting an error message saying:
    "The operation could not be completed. A file system I/O error has occurred"
    Doesn't matter if it's a massive file or a small one. Sometimes the Liquify box will actually come up, but after I make one or two strokes, the beachball comes up and moments later I get the error message again. It doesn't actually crash PS, it just prevents me from using those filters. Each time I click, the error message comes up again. I've also tried it with my PS CS3 on the same Mac and it does the same thing. However on my 4 year old MacBook Pro, it's absolutely fine. Grrrrr!
    I have my PS set as default on 64 bit. I have a scratch disk with nearly 500gb free (which is not my start-up disk) I am running a Mac Pro 2.8 GHz 8 Core Intel with 16gb of ram, so it's not a memory problem. Running Mac OS 10.6.7 but did the same on 10.6.6 too.
    I have repaired the disk permissions on the start-up disk. I have reloaded a fresh copy of PS (a few times). Even did a hard Un-install with maccs3clean after trying a regular Un-install with no success.
    I had an 1.5hr conversation with an Adobe Tech guy earlier today and he's scratching his head, so I'd thought I'd throw it open to you guys hoping someone has had the same problem and can save the rest of my hair from being pulled out.
    HELP!

    Hi Guys,
    I know this is an old post but I need to bump it.
    I work for a image processing company and we all sit on top spec mac pro's with 16-32 GB of RAM, top graphic cards and SSD drives.
    All of my collegaues' computers are working fine when it comes to using liquify and all of the filters that come with CS5, but it sure doesn't work on my mac at all.
    We have a tech guy who has re-installed the OSX on a new SSD drive now two times and we have started from scratch with installing CS5 but it still will not work. I keep getting "the operation could not be completed..." every time i try
    to liquify or do any other filter work.
    I am 100% sure it doesn't have to do with any disk permissions or broken drives in my case.
    Could there be an issue with the graphic card or any other hardware component since it's clearly not a software related issue?
    Any help would be much appreciated because we are very much in the dark here.
    Best regards,
    Anders

  • Install Problem "Error: -48  The operation could not be completed... "

    I am unable to install the "Take Picture Action Installer" from http://automator.us/downloads.html#1026
    The error message is "Error: -48. The operation could not be completed because there is already an item with that name."
    However I created a test user on the system and was able to do the install there just fine. Anyone know how I could fix the problem?
    Thanks

    Hi Aaton
    I have not had a problem with that download (since your post)
    There is an Automator "Take Picture" action which is owned by the system (Macintosh HD/System/Library/Automator/) which appears under the Image Capture library
    The .zip file which you downloaded should go into Your user name/Library/Automator/ and is named "NYHTPROD-Take Picture.action" and appears under the Photo Booth library. It says that is the destination in the panel when you unzip the file
    Suggest you have a look around those libraries and check things are as they should be then try again
    chris

  • Bridge CS5 freezes after error message...."The operation could not be completed, there is not....

    Error - The operation could not be completed.  Not enough storage is available to complete this operation.
    After this happens I have to close Bridge as it is unresponsive to any further commands and I often I have to use the task manager to close it.
    I have scoured these boards and the web for a solution and have found others w/ the same problem (even people w/ much more RAM) but have not found a solution beyond the usual advice of changing cache settings, increasing page file, or making sure there is enough hard drive space.
    I have two 1TB hdd's w/ over 80% free space on each but I only have 2 GB RAM (all my old motherboard can handle).  However, this error message occurs even when Photoshop is not running (only Bridge) and my RAM usage meter shows that I still have plenty of unused RAM available.  I did not have this problem w/ Bridge CS4. The error msg. of not enough storage doesn't make since considering the available RAM showing and ample space on the hard disk assigned to the cache (which is a different physical drive than my OS or the Bridge program.)
    Here are some of the things I have tried:
    reset Bridge preferences at startup, changed the location of the Bridge cache, its size and options, purged the cache, changed the page file size on both drives to the max, defragmented drives, disabled Norton anti-virus, etc.
    -What else can I try?
    -Would creating a new partition on my 2nd hdd to be used solely for the Bridge cache make any difference and if so, why?
    Please help, I am willing to try anything to get this to work.  It is a personal challenge at this point.... and I am determined to get Bridge CS5 to work on my machine...... 
    Thanks in advance for any advice or insturctions you may offer!

    Dear Customers,
    I am Baichao Li, Adobe Bridge Quality Engineer.
    Bridge team is investigating this error, In order to reproduce the problem in our lab and find a solution as soon as possible, I would like to ask you to help providing more information, please follow steps below,
    1. Download "User Mode Process Dumper Version 8.1" from
    http://www.microsoft.com/downloads/en/confirmation.aspx?familyId=e089ca41-6a87-40c8-bf69-2 8ac08570b7e&displayLang=en
    2. Install "User Dumper" following Microsoft's article
    http://support.microsoft.com/kb/241215
    3. Open "Control Panel -> Process Dumper", switch to tab Page of "Processing Monitoring"
    4. Click button "New", input "Bridge.exe" for "Application Name".
    5. Select "Bridge.exe" from list box, then click button "Rules", 
                    Select "Use Custom Rules",
                    Browse to a custom dump file folder, 
                    Check "All Exceptions",
                    Check "Ignore Exceptions that occur inside Kernel32.dll",
                    Select "Mini Dump Type" to "Small"
                    Select "Save Mode" to "Cyclic Saving 5 times"
                    Others keep uncheck or unselect.
    6. Click "OK" button to exit "Rules" setting dialog, then Click "Apply" button, then click "OK" to quit "Process Dumper " dialog.
    7. Launch Adobe Bridge CS5, do your work.
    8. When that error message occurs, Bridge hang, wait for a while, then kill bridge using "Task Manager", please check if there are some ".dmp" files in "custom dump file folder " which is set in step 5, if so, please zip all .dmp files and FTP to us (please contact me at [email protected] for FTP info). It would be better if you can repeat your hang and send us more zipped .dmp files.
    Sincerely appreciate if you could provide us your workflow before Bridge throws that error message, what file formats you use, what features you use and your machine information.
    Best Regards,
    Baichao Li

  • IMovie error message "The operation could not be completed"

    I am trying to create a new movie and got this error message " The operation could not be completed" after selecting the Themes.
    Any suggestions?
    Thanks

    My problem was because I had moved my Movies folder from the system drive (which is an SSD) over to another drive with a larger capacity. I then created an Alias in my home folder.  Turns out this is what was causing the problem. I shoulda known. Some apps absolutely hate this. iMovie, being the dumbed down garbage that it is, simply MUST have it's library in a certain folder, apparently. Would be nice if we had a choice about it.
    I find Premiere Elements is actually the better (and friendlier) program. However in this case, I had to slum it with iMovie due to the Quicktime file I was working with.

  • The share operation "master file" has failed. the operation could not be completed because an error occurred creating Frame 93164 (error-1). how can i find the frame?

    The share operation "master file" has failed. the operation could not be completed because an error occurred creating Frame 93164 (error-1). how can i find the frame?

    https://discussions.apple.com/thread/6219522

  • The operation could not be completed because an error occurred when creating frame 6105 (error -1).

    I am trying to share a project and after the 3% of sharing the project it appears this message.
    The operation could not be completed because an error occurred when creating frame 6105 (error -1).
    What can I do?? I need some help please!!

    You need to set the FCP X Preferences to count in frames, locate that frame, delete the clip around it and replace with a fresh one.

  • The operation could not be completed because an error occurred when creating frame 19788 (error -1).

    When attempting to build a quicktime movie from my video project on final cut pro I got this message    "The operation could not be completed because an error occurred when creating frame 19788 (error -1)".

    Kathy ...
    Better to post your topic in the Final Cut Pro community here.

  • The operation could not be completed because an error occurred when creating frame 570 (error -1)

    Hi everybody,just started with FCPX and the following occured:
    The operation could not be completed because an error occurred when creating frame 570 (error -1)
    Result is that i can not share to my hard disk.
    If anybody could help me out here....?

    CHange General preferences to show frames. Check what's happenING at the frame number. Maybe replace the shot.

  • The operation could not be completed because an error occurred when creating frame 2829 (error -1)

    I'm getting this error code in Final Cut Pro.  The operation could not be completed because an error occurred when creating frame 2829 (error -1). What does this mean and how can I fix it?  This code comes up when exporting. 

    Final Cut Pro X 10.0.8 and I'm running it on OS X 10.9.1.  I have been doing nothing different for the past few months. I have been creating a weekly video and exporting the same way and everything, but it just did this today for the first time. I have never had this error code before.

  • The operation could not be completed because an error occurred when creating frame 30256 (error -1).

    When trying to export a project from FCPX, I get this error
    The operation could not be completed because an error occurred when creating frame 30256 (error -1).
    Has anyone any ideas?
    Many Thanks

    Switch your FCP preferences to show frames and see what's happen at that frame number. Try trash any render files. Switch off background rendering. Don't render. Try replacing the clip at the problem area.

Maybe you are looking for

  • Time Machine And Repair Permissions Error

    Hi. I have a new Intel Mac running Leopard. "Set up Assistant" worked like a charm and brought over all my preferences, iTunes, iPhoto etc. with out a hitch. Verified permissions and the disk and came up clean. I bought a USB LaCie 500GB external har

  • How to use the 'swc_element_get' function?

    Hi Experts, In  my  workflow  there  is  a  requirement  where  I  want  to  take  up  some  container  elements  and  insert  those  values  into  a  z  table . For  that  i  am  using  the  'swc_element_get'  function.  I  am  confused  about  the 

  • User exit in vendor master

    Hi I want to know if there is any user exit or bapi  in vendor master  i.e XK01 after the save happens .

  • F.5E - Balance Sheet Adjustment

    Hello group Does anybody know if is possible to active the post Balance Sheet Adjustment using the New GL tables? Ps. There is no split documents configuration ( 5.0 version) Thanks for now.

  • How to spawn email client window (e.g., Outlook message)?

    I'd like to have a button that, if pressed, will spawn an email with subject, to, body, and other info filled in. For example, if I use Outlook, it would spawn an Outlook message window with everything I want filled in. Is this possible with the stan