Error while control update

I have a problem.
I have a large project and I need to modify it.
I want to add some elements to control (Strict Type Def.). My control - it is a cluster with numbers (or arrays).
But I can't to do it. When I want to save a new (modify) control, it appears a error:
**** (I don't remember)
allocsup.cpp (!!!)
and crush.
What I may to do for modify a control?
Thank you.
Message Edited by Unk on 08-07-2006 09:50 AM

Hi Unk,
I agree with Wiebe, types within types can be a pain when editing an "inner" type, though I've never attributed a crash to this - just broken-arrows.
If I were you I'd do a mass-compile (Tools/Advanced) of everything associated with the type. If that doesn't fix the problem, try to recreate the problem with a small set of VIs - saved as a LLB and posted here.
Also, an easy experiment would be to open the top-level type-def then do a "save-with-options" (File menu) to pull-together any/all member type-defs. Perhaps the problem is a missing or broken member-type-def. If the save is successful, close/open LabVIEW and see if you can modify the top-level type-def in its new (temporary) location.
Just some ideas
"Inside every large program is a small program struggling to get out." (attributed to Tony Hoare)

Similar Messages

Error while schedulingg update stat in db13

Dear Experts,
Please look into my issue we are facing an error while scheduling update statistics in db13 and I tried to open detailed log
It is given
SXPG_COMMAND_EXECUTE failed for BRTOOLS - Reason: program_start_error: For More Information, See SYS
Please help me how to solve this my error
Regards

Hi,
Check the owner for BRBACKUP, BRARCHIVE, and BRCONNECT in kernel,
these files should be with SIDADM, if not change the owner to SIDADM and rerun the update stats.
and also Refer the note 446172
Regards,
Ram

Error while activating update rule in Inventory

I was working with migration of datasource 2LIS_03_BF from 3.x to 7.0 in MM module.
Recieved an error while activating update rule 0RT_C17 2LIS_03_BF in Inventory module.
When I checked the routine ,it shows the following error.
Errror:E:The Dictionary structure or table "/BI0/PMAT_SALES" is either not active or does not exist.
I am not usre how to resolve this.
Kindly reply asap.

1. Activate the master data infoobject for 0MAT_SALES at info object level of RSA1
2. Replicate and Activate the data source once again by using the program > SE38 : RS_TRANSTRU_ACTIVATE_ALL
3. Then try to migrate you datasource and activate you update rules.
it may help you
Regards.
Rambabu

Error while downloading updates on ZTE Open

Hello, sorry guys for asking lot of questions. I have purchased ZTE Open from ebay store(UK) and i wanted to update my phone to FF OS(1.1) but when i click on Check Now button after sometime it says "Error While Downloading Updates"
Any Solution?

OTA 1.1 is still delayed to be pushed, hopefully soon. What you are seeing is a bug that ZTE are aware off & should be fixed with next round of updates. Ignore for now. It's not 1.1, or any update for that matter, just a false alarm.

Error while Transporting Update Rules.

hi xperts,
   I am getting Error while Transporting the Update rules,i already transported the INFOCUBE,INFOPACKAGE EVERYTHING.
    Start of the after-import method for object type R3TR ROUT (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for ROUT L
The errors affect the following components:
    BW-WHM (Warehouse Management)
Is the error,I didn't change any thing in the Cube or changes to Update rules.
Can anybody Help me?.
   thanking you,
                               with regards,
                               Narendra.

Hi,
Are you still facuing the issue ?
No need to worry about the routines, once you save the update rules if there is any routines in it it will be saved in the same request. If you want to check the routines you can check in the transport connections. Transfer the update rule to the right hand side of the screen and you can see all the routines that belong to the UR.
If you know the technical names of the routines you can check in the TADIR table.
Have you transported the info-sources for this update rules ? why not you again capture the info-source and the update rule in a single request and transport again.
Hope it helps.
Thanks,
Soumya

Error while transporting update rule.

Hi experts
I am trying to transport one update rule to production..
But it is ending with error code 8 n it is giving me following error :
      Errors when activating update rule XXX
      IC=0PP_DS03 IS=0CO_OM_OPA_6 error when checking update rules
Kindly tell me what need to be done now.
Regards
Swati

Hi Swati,
Before transporting the update rule, in the present scenario, you have to transport the infosource which contains the corresponding "0recordmode".
Whenever you transport anything into the quality or production, the list should be as followed in the given manner :
Seq No     Objects in Request
1     Package(DEVC), InfoArea(AREA), Application Component(APCO)
2     Function Modules
3     Keyfigure Catalog(IOBC), Keyfigures(IOBJ), Units(IOBJ)
4     Characteristic Catalog(IOBC), Characteristic Infoobjects(IOBJ)
5     Infosources (ISCS, ISTD, ISMP, ISTS, ISFS, ROUT) and
                Generic Data Sources(DataSrce Active Version(OSOA), ISMP, ISTS,DataSourceReplica (ISFS)
                and Tables (TABL)
6     Infoproviders(ODS(ODSO), Cube(CUBE), Infoset(ISET))
7     Update Rules(UPDR, ROUT)
8     Infopackages(ISIP)
9     Queries(ELEM)
10     Webtemplates(TMPL, BLTM, BPTM)
Just transport all your things in the above sequence, and it will be done successfully.
Also, remember there should not be any data in the corresponding infoprovider while you transfer the update rule, else it will fail.
Hope it helps,
Regards,
Neha.

ASSERTION FAILED error while migrating update rules

Hi all,
We are migrating the 3.x datasource for sd - lo cockpit.
Migration steps are as follows...
1. Make a copy of the infosouce. Activate it.
2. Migrate transfer rules. Activate it.
3. Migrate datasource.
4. Migrate Update rules for the respective info providers.
      But while migrating update rules ASSERTION_FAILED runtime error occurs.
       the assert condition was violated.
       CL_RSTRAN_TEMPLATE========CP or CL_RSTRAN_TEMPLATE======CM003
Please help i tried all the means to rectify but none succeds.
It is occuring for each datasource .
Thanks in advance.
aravind

Hello
Assertion statement is like a conditional break point in ABAP. When you are trying to migrate the update rules,it is failing with Assertion statement it means there is some error with your update rules. Either the mapping is wrong or the the target to which it is mapped is in inactive state. Please check these and retry your migration.
Regards,
Krishna Tangudu

DSO error while creating update rules

Hi All,
i am new to BI 7.0 , while creating update rules for datastore object , i have given the infosource name, and tried to activate it, then i got the error,
ERROR: infoobject 0recordmode is missing from the infosourse
Can any one help, points are assured for the suggestions
Thanks in advance
Peddinti

Hi,
Add 0recordmode info object to your info source and again try to create DTP, 0recordmode is requried in DSO to keep data with history.(like before image,after image,etc), by adding this you dont have any problem, at the time of creating info source itself system will prompt you that this info object is missing do you want to add here say yes.
Regards
Sankar

'L_CHAVL_IN' Error while Activating Update Rules.

Hi All,
 when i am tring to activate my update rules, it is giving error, field "L_CHAVL_IN' in unknown. I dont have that field in my objects.
 i found that field in 'Progarm' for the update rules. that field is used in the exit of one of the feild in the update rules.
 Please give me a solution how to solve this.
Regards,
Ramana.

Check the following SAP Note (# 782858)
Symptom
When you activate the update rules, the system issues a syntax error: 'Syntax error: Field "L_CHAVL_IN" is unknown'.
Other terms
Syntax error; generation; l_chavl_in; update rules
Reason and Prerequisites
This is a program error. The error only occurs under the following circumstances:
You generate an optimized update rule;
An alpha conversion is required.
Solution
BW 3.0B
 Import Support Package 25 for BW 3.0B (BW3.0B Support Package 25 or SAPKW30B25) into your BW system. The Support Package will be available once note 0723254 with the short text, "SAPBWNews BW3.0B Support Package 25", which describes the Support Package in more detail, is released for customers.
BW 3.10 Content
 Import Support Package 19 for BW 3.10 (BW3.10 Support Package 19 or SAPKW31019) into your BW system. The Support Package will be available once note 0723261 with the short text, "SAPBWNews BW 3.1 Content Support Package 19", which describes the Support Package in more detail, is released for customers.
BW 3.50
 Import Support Package 10 for BW 3.5 (BW3.50 Support Package 10 or SAPKW35010) into your BW system. The Support Package will be available oncenote 0763336 with the short text, "SAPBWNews BW Support Package 10 NetWeaver'04 stack 10", which describes the Support Package in more detail, is released for customers.
Assign pts if helpful.

Error while transfering update rules

Hi all,
I am trying to transfer business content for 0SRCT_DS1(Contract Management) from D to Q in BW3.5.
Everything went through except for the update rules.
I checked and rechecked if all the infoobjects are active.
But still am getting the following error:
Start of the after-import method for object type R3TR UPDR (Activation Mode)
Update rules CB1GEUI48SB210JQAYD68E74J read in version M
Error when activating update rule CB1GEUI48SB210JQAYD68E74J
Activation of the update rules for 0SRCT_DS1 2LIS_02_SCL
IC=0SRCT_DS1 IS=2LIS_02_SCL error when checking the update rules
any suggestions?

Hi ,
Just check whether update rules has any routines or fomula, or constant.
If so collect that in a request and transport it.
Assign points if it is helpful.
Thanks
Shanba

Movement type 122 Error while GI" Update control of movement type is incorr

Hai Gurus,
I am having an errow when doing a GI thru movement type 122. i am getting this error message " Update control of movement type is incorrect (entry 122 X X)" Can any one help me how to fix this.
I did this transaction using MIGO_GI and selecting Goods issued and other as the options with 122 as movement type.
warm regards.
mahesh.

Hi
Mov type 122 is return to vendor if the qualtiy of Goods is Poor / Quality
Regatds
AKM

Getting error while activatinb update rule 2LIS_02_SCL

Hello BW gurus,
I have activated and replicated datasources for PP and activated the 0PUR_C01 infocube now I am activating the update rule 2LIS_02_SCL but while activating the update rule iam getting error message
"Object UPDR CD2NYEJKIIFCCFA9FW1OQRONE could not be found"
which is nothing but the technical name of 2LIS_02_SCL. in GROUPING TAB I have selected " only necessary objects" option.
Any help on this is greatly appreciated can you please suggest me how I can troubleshoot this.
I will assign points to all appropriate answers.
Thank you,
Krish

Hi Krish
Don't worry about the error message.
RSA1-> Business content-> here select the update rules from 2LIS_02_SCL to cube 0PUR_C01 and with only necessary objects option-> Install update rules with applicable routines. Then refresh RSA1 and check for update rules. If still you don't get update rules, please let me know
Regards
Pradip

ABAP Runtime error while activating Update rules.

Hi Gurus,
Actually we are in NW 2004's SP9.
While activating the update rules of cube "0PY_PPC01" it is going to ABAP runtime error. It is giving the key words like "MESSAGE_TYPE_X"
"%_T005K2" or "INSTANTIATE". And i apply NOTEs also i am unable to fix it.
Can any one give correct NOTE number that can fix it or any suggestions.
Thanks in advance.
Thanks
Raju.k

Hi Sven,
Now we are also in SP11, But the thing is all the other UR are working fine Except
this UR. Even there is no perticular NOTE number for this.
Thanks
Raju.k

Error while copying Update rules from One Cube to other

I am getting the following error message while I was trying to copy an existing update rule from an existing InfoCube to a New InfoCube. Has anyone experienced this before? Please let me know how to resolve this.
Formula 3ZKQ....... (Object version M) could not be read.
The new and original cubes are custom cubes.
Thanks!

Hi Vinod,
Check the update rules for the original cube. Are they active? It appears that they contain a formula...check this too.
Hope this helps...

Getting error while installing update for Windows 10

Hi,
I am getting below error message while installing window 10 preview using window update option. Please help me how to address this issue to install window 10 preview
OS : Windows 7 Enterprise SP1 64 bit
Upgrade to Windows Technical Preview for Enterprise
Installation date: ‎10/‎3/‎2014 10:50 PM
Installation status: Failed
Error details: Code 80004005
Update type: Recommended
Install a preview of the next version of Windows.
More information:
http://go.microsoft.com/fwlink/?LinkID=507415
Help and Support:
http://go.microsoft.com/fwlink/?LinkId=507417
Regards
Selva

Hi Selva,
Can you download the ISO file from this site?
Download Windows Technical Preview
http://technet.microsoft.com/en-us/windows/dn783436
If so, please download the installer and make a DVD or bootable USB, then try to perform the installation from there.
Check following things first:
1.Disconnect any devices connected to the PC.
2.Disable/uninstall all anti-virus software (be sure to enable/reinstall later)
3.Install all important updates from Windows Update before updating.
If you still fail to install Windows, you will find $Windows.~BT under C drive (the system drive), please make sure to show up the Hidden file.
Then, locate to the $Windows.~BT folder and find \Sources\Panther\setuperr.log and setupact.log, please upload them to a file sharing service like Onedrive or "Rapidshare" and put a link to them in your reply.
Kate Li
TechNet Community Support

Error while control update

Similar Messages

Maybe you are looking for