Error while copy of Update Rules from ODS 0SD_O03 to InfoCube 0SD_C13

Hi all,
I work on a NW04s SPS9 System I would like to simply copy Update Rules (from an ODS to an InfoCube) from the BCT to the 1:1 Z-Copies of these Objects.
To do so, I copied the InfoProviders 0SD_O03 and 0SD_C13 to Z-Versions. In SAP BCT the InfoCube is updated from the ODS. The ODS itself is updated from InfoSource.
After successfully copying the two InfoProviders as next step I tried to copy the Update Rules from the Content version Objects to the Z-Version Objects to link them.
Similar to copying update rules in 3.5 I tried
- right click on "ZSD_C13"
- choose Additional Functions - Create Update Rules"
- choose DataSource: ODS Object "ZSD_O03"
- choose Copy from: InfoCube "0SD_C13"
This result in the error "0SD_C13 is not suitable as a template for copying update rules".
Some hints that might help:
1. The very same error occurs if I try to copy the Update Rules from 0SD_O03 to 0SD_C13.
2. I also tried to copy both Update Rules (to C12 & C13) on a BW 3.5 system where it worked fine: The update rules from both Z-ODSs to both Z-Cubes were copied correctly 1:1 and without any errors.
3. In the NW04s System I was able to copy the Update Rules from the InfoSource 2LIS_11_VAITM to 0SD_O01 (as well as from 2LIS_11_VAHDR to ODS 0SD_O03). So I only cannot copy Update Rules from ODSs to InfoCubes while it is possible to copy Update Rules from InfoSources to ODSs.
4. During copy of 0SD_O03 the system warned: "InfoObject 0FISCVARNT needs to be in key for DataStore object ZSD_O03". No matter whether I move this IO to the keys of the Z-ODS, the Update Rules copy does not work.
- This warning does not show up on BW3.5 when I copy the very same ODS. Can anyone explain this?
- This warning is not displayed during the copy of ODS 0SD_O01, just for 0SD_O03.
5. Obviously during a preceding test I actually must have been able to copy the Update Rules for another copy of 0SD_C13 (as I can see the Update Rules in the SAPGUI). I stopped this first test as I was not able to do the Update Rules copy for 0SD_C12.
Yet as of today I cannot copy Update Rules this for both cubes 0SD_C13 as well as 0SD_C12. So yesterday there was no error on copying the Update Rules to InfoCube ZSD_C13, but today there is. To my knowledge nothing has been changed in the System Setup / Customizing in the mean time.
6. For both cubes ZSD_C13 as well as ZSD_C12 it is possible to copy Update Rules that map from the BCT ODS to the Z-InfoCbes. So I can copy Update Rules from 0SD_O03 to ZSD_C13 and from 0SD_O01 to ZSD_C12. This would point in the direction that the copied ODSes are the source of this behavior?
I am not sure whether this is a special NW04s behavior and how to use it correctly so the Update Rules can be copied.
Please could you help on how to copy these Update Rules in NW04s or share your experience if you had similar?
Thanks a lot,
Werner

Hi Vinod,
Check the update rules for the original cube. Are they active? It appears that they contain a formula...check this too.
Hope this helps...

Similar Messages

  • How to debug start routines of update rules from ODS to InfoCube

    Dear gurus,
      I have an update rule from ODS to InfoCube. I wrote a start routine in the update rule. Now I want to debug it. I went to monitor and simulate update the data package and only got the prompt "No data exists in the corresponding PSA table". So how can I debug this start routine?
      Thanks in advance.
    Jin Ming

    Jin,
    In order to use PSA between ODS and InfoCube, you may have to use an exclusive InfoPackage and load separately. In that InfoPackage, choose the radio button to use a PSA.
    I think you are currently updating the InfoCube directly without using a separate InfoPackage.
    Look for an InfoSource under DataMarts (search for 8<ODS Technical name>) and create your InfoPackage there.
    Good luck.

  • Error while activating the update rules related to Inventory

    Hi,
    In standard Cube 0ic_c03, I am including a field 0MAT_DOC that is available in the transfer rules of 2lis_03_bx. And when I include that info object in the cube my update rules are getting deactivated.
    When I try to activate the update rules, I am getting the following error message:
    1. InfoSource 2LIS_03_BX is only set up for the initial run for non-cumulatives.
    2. IC=0IC_C03 IS=2LIS_03_BX error when checking the update rules.
    Requesting you to please guide me on how do I go about solving this issue.
    Thanks & Regards.

    Hi Ganesh,
    For implementation of inventory in the BW side, first you need to carry out following steps sequentially:
    1. MCNB: Filling set up tables for initial entry of stock balances from 2lis_03_BX
    2. OLI1BW:Filling set up tables for stock movements from 2lis_03_BF.
    3. OLIZBW:Filling set up tables for inventory revaluations from 2lis_03_UM
    Check the Business content cube 0IC_C03.
    Also check the document how to inventory management.
    For report install the business content report for the cube 0IC_C03 and check it.
    check this link for inventory
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
    Regards
    Pcrao.

  • Error while maintaining the Update Rules for the Infostructure

    Hi,
    I have added 2 new characteristics for the existing infostructure S9xx and executed the same. While maintaining the Update Rules for the same, system is giving the error message 1. "Field 'PARVW' unknown" and 2. Error generating program RMCX0011.
    Please guide me in resolving the issue.
    Thanks & Regards,
    Kumar.

    Hi,
    This is with reference to my earlier question that an error is occuring while maintaining the update rules for the existing Infostructure.
    Solution provider for this will be rewarded with good points.
    Regards,
    Kumar.

  • "Old" update rule from ODS not working

    Hi Gurus,
    I need to set up the "old" fashioned update rule to load data from an ODS1 to another ODS2.
    The thing is that I need to set up an update rule because I need to implement a Return Table Routine that is not supported (as far as I know) by the new Transformation/DTP.
    When I select option (through the right mouse click over ODS1)  "Other Options" - "Create Update Rule" it takes me out of the RSA1 and leaves me in the main menu making it impossible to create a new update rule.
    The strange thing is that I have this working from and ODS to an InfoCube.....
    Suggestions, a workaround??
    Andrea.

    Hi Jerry,
    Just to confirm that this is not working. The tys_TG_1 structure only shows me the target infoprovider structure. Check that in the how to, to be able to derive employee first you need to assign eache source_filed to the result_field leaving employee blank.
    I need to have in the same place, the source_field structure (source infoprovider field structure) and the result_field structure (target infoprovider structure). That is what the "old" return table gives me as in the same place I can have the communication_structure (source infoprovider field structure) with the return_table structure (target infoprovider structure). 
    Just to understand, in the source infoprovider I have 12 Key Figures (1 for each period) and I have to split each incoming record to 12 records. If I work only with the result_field structure tys_TG_1 and the result_package tyt_TG_1 I'm not able the see those 12 KF.
    So... return table functionality is not fully supported by BW 7 as far as I know.
    Any other ideas why I'm not able to create the old Update Rules from an ODS?
    Regards,
    Andrea.

  • Error while installing 2LIS_03_BX update rules for 0IC_C03

    Dear experts,
    when i am trying to install the standard business content
    update rule for 0IC_C03 for the datasource 2LIS_03_BX,
    it throws me a error stating
    "Object UPDR BW9VUFZSUYTTIZS0HT9I4U3RP could not be found"
    I need the cause and solution for this error.
    With regards,
    Meiyappan

    Please choose to install the Update Rule between InfoSource 2LIS_03_BX to InfoCube 0IC_C03.
    You have probably not selected to install the Update Rule which is throwing an error.
    While Installing, after choosing the required Objects, please also change the Display to "List" to be able to view all objects clearly.
    Regards
    Anujit Ghosh

  • Error while copying Std determinatino rule in CRM

    Hi,
    I get the following error while trying to copy the existing determination rule. Could you analyse this please.
    ERROR MSG:
    Prefix number: entry missing for system CRD client XXX
    Message no. 5W023
    Diagnosis
    Tasks, rules, and workflow definitions require an ID that is unique throughout all systems and clients. In this way, you can ensure that you can transport these objects from one system into another at any time (without restrictions). From a technical point of view, the uniqueness of the ID is ensured by what is known as a "prefix number". You can define a separate prefix number for every system and every client in table T78NR.
    System Response
    If a prefix number is not defined in the client in which you are currently working, it is not possible to maintain (maintenance terminates).
    Procedure
    Maintain table T78NR in Customizing, and create an entry for the system in question and the current client.
    Many thanks
    Guest01

    Its been answered

  • Error while Installing the update rules in business content

    Hi All,
    I got the following error,when i was installing the update rules : Object UPDR D4C8V3KA00XD5ANPVUAH9KQDJ could not be found in version M. but these update rules appear as inactive mode in bi content-object types-updaterules-selection-inactive status.
          Please could i know where we can check version status for business content pdaterules. but it was showing NOT FOUND IN Version M .
    please anybody can help me for solving this error.
    i will asign points for your inputs.
    regards,
    kumar.
    Edited by: kumar kumar on May 20, 2009 5:58 AM

    Hi,
    You can check the Content Release and Last Content Modification for your update Rules following thee given path:
    RSA1>BI Content>object Types>Update Rules>Select object(search for ur update rules) -->Transfer Selections.
    After they are being transfered to the right pane.On right pane (where you can see the its technical name) scroll towards right you will see last three tabs as "Content Release,Last Content Modification and Person responsible".
    Change the Grouping as "Before and afterwards" and then try installing.
    Hope it helps.

  • Copying of Update Rules

    Hi,
    I need to copy the update rules. Let me explain the requirement:
    The standard business content in SD provides the update rules from InfoSource 2LIS_12_VCHDR to InfoCube 0SD_C03.
    We have created an ODS (ZSD_O01) on the InfoSource 2LIS_12_VCHDR, with the one-to-one field mapping in the update rules.
    As a result, the update rules from ODS ZSD_O01 to InfoCube 0SD_C03 are exactly identical to the Business Content Update rules between the InfoSource 2LIS_12_VCHDR and InfoCube 0SD_C03.
    Can I copy (All) the update rules "between the InfoSource 2LIS_12_VCHDR and InfoCube 0SD_C03" and paste them for the update rules "from ODS ZSD_O01 to InfoCube 0SD_C03" ??.
    If you right-click on any individual update rule line (Go to Change Update rules), you see two options: 1. Copy Rule (F6), 2. Copy Update Rules (Ctrl + F12). What is the purpose of these two?
    Regards,
    Milind

    Hi,
    I hope update rules can be copied only if they are based on same Datasource.
    For example if you want to copy update rules for Cube1 to cube2 it can be done only if these two cubes are based on same ODS or Infosouce.
    Also check some of the similar thread..
    Copy update rules from one InfoSource to another one
    Copy Update Rules
    Regards,
    Prema

  • Error while copying Update rules from One Cube to other

    I am getting the following error message while I was trying to copy an existing update rule from an existing InfoCube to a New InfoCube. Has anyone experienced this before? Please let me know how to resolve this.
    Formula 3ZKQ....... (Object version M) could not be read.
    The new and original cubes are custom cubes.
    Thanks!

    Hi Vinod,
    Check the update rules for the original cube. Are they active? It appears that they contain a formula...check this too.
    Hope this helps...

  • Error while copying data from infoprovider to planning area

    Hi,
    Error for COM routine using application program (return code 40,075)
    Message no. /SAPAPO/OM102
    Diagnosis
    An application program has called a COM routine. During the process, an error occurred.
    I got the above error while copying data from infoprovider to planning area using t code TSCUBE.
    How to resolve this?

    Hi,
    Is your issue resolved, If not please run MPOS consistency checks, Planning area consistency check and livecache consistency check.
    Below are the programs for the same.
    /SAPAPO/TS_lcm_cons_check
    /SAPAPO/TS_PSTRU_TOOL
    /SAPAPO/TS_PSTRU_CONS_CHECK
    Regards
    Kishore

  • Copy Update Rule from Business Content

    Hi All,
    Currently I have activated some standard BI Content E.g. InfoCube 0FIAR_C03, DSO 0FIAR_O03, InfoSource 0FI_AR_4 and all the corresponding update rules.
    Now I have copied both InfoCube and DSO into another customized version E.g. ZAR_C03 and ZAR_O03. I managed to copy the same update rule from InfoSource 0FI_AR_4 to ZAR_O03 using the template but I don't have the option of copying the same update rule from ZAR_O03 to ZAR_C03 using the same update rule of 0FIAR_O03 to 0FIAR_C03.
    I know I have the choice to manually re-create all the details but is there any other workaround?
    Please read through carefully my question. I have seen some forum asking to load data from 0FIAR_O03 to then ZAR_O03 then so forth.
    Purpose of doing the above method is because I want to remain the business content as what it is and just to copy it to Z version for customization.
    Thanks
    David Yee

    Hi All,
    Is there any other second opinion related to this issue before I close the question?
    Thanks
    David Yee

  • Error in activation of update rules.

    Hi,
    I get an error - 'IC=0PP_C02 IS=2LIS_04_P_MATNR error when checking the update rules' while activating the update rules in BI content. Rest all the data flow is activated except update rules.
    Can anyone throw some light on this?
    Thanks & Regards,
    Manisha

    Hi ,
    Check the update rule.
    In that there are two routines.
    In the first one Goods being processed & 2nd one as well , there is syntax err.
    /BI0/APP_O010 doest exist.
    Mostly it is fetching some data from some dso in this routine.
    So it should be activated.
    Then update rules will be activated.
    Regards,
    Devina

  • Simple creation of Update Rule from BW Data Source

    Hi guys,
       Pertaining standard SAP Business Content extractors
       I am referring to <b>InfoCube : 0PA_C01(Headcount and Personnel Actions)</b>
       I am attempting to<u> create </u>an <b>Update Rule</b> from <b>Info Source : 0HR_PA_PA_1(Headcount)</b>
       This <b>Info Source : 0HR_PA_PA_1(Headcount)</b> is connected to <b>BW Data Source</b>(Not R/3!) 0HR_PA_PA_1
       I have created an Info Package for this Info Source and managed to get 15 records{In Contrast to my 68800 Records from Info Source : 0HR_PA_0(Employee)}
       So, when I create an Update Rule to Connect <b>Info Cube: 0PA_C01(Headcount and Personnel Actions)</b> to <b>Info Source to Info Source : 0HR_PA_PA_1(Headcount)</b>, I get the following error
    ERROR : <b>IC=0PA_C01 IS=0HR_PA_PA_1 error when checking the update rules</b>
      Could you please also advice, why do I only get 15 records for Data Source 0HR_PA_PA_1 ?
      P/S : I am on BW 3.5

    Hey Rohini,
       This <b>Data Source: 0HR_PA_PA_1(Headcount)</b> is tricky to me because it`s a BW Data Source.
       Exact Error Message is as follows :-
      "<b>Error Message : RSAU461
        IC=0PA_C01 IS=0HR_PA_PA_1 error when checking the update rules</b> "
       My Exact Problem is that I don`t see any values for the following fields in my Info Cube : 0PA_C01(Headcount and Personnel Actions)
      Country;
      Country Code;
      Gender;
      Nationality;
      Language;
      Postal Code;
      Region;
      Position;
      Job;
      Payroll Area;
      Payroll Group;
      Pay Scale's;
      Pay Grade's
      This is because, this information is supplied by InfoSource : 0HR_PA_PA_1
      But I don`t have an Update Rule for this InfoSource in my InfoCube : 0PA_C01
      So, that's why I am attempting to create this additional Update Rule
    <i>  And also, could someone enlighten me why would SAP not include such a standard Update Rule when they have already idenfied those needed fields in a Cube ? This is suppose to be a STANDARD workable Business Content right ?</i>
      P/S: I have applied Note : 336229

  • Error while creating web dynpro project from DTR

    Hello,
    I am getting following error while creating Web Dynpro project from DTR,
    org.eclipse.jdt.core.JavaModelException: File /<track name><DC><package>/.classpath is read-only.
    Still project gets created but evenif I check out view , it does not allow me to edit it.
    Also I have checked in and activated some changes but active copy in DTR is not reflecting those changes.
    I tried Add subtree option in DTR perspective for folders in this project. Is it result of that?
    Please help me in this regard.
    Thank You
    Beena

    Hi Beena,
            .classpath file should not checked in to DTR(uncheck the Read only properties). It is local file it contains class path for local system.
             Generally in webdynpro project only src folder should be checked in DTR.
    Regards
    Suresh

Maybe you are looking for

  • Need Inputs - Creation of webservice in SAP R3 through PI

    Hi Experts, Need inputs that my client wants me to  create an webservice in SAP/R3 through PI and they (client) will call it by  their 3rd party software. Webservice contain fields like :- Comany_Code, Location_Code,Item _code etc. SAP - > PI ---> 3r

  • CLF Problem in Matrix

    hi All I designed a form using Screen Painter. In that form i added a matrix and a CLF for a particular column the Object Type of the CLF is "4" and i Binded the Column with a User Defined Table of Master Type and also return the values into the Matr

  • "General Error" when moving older project to newer computer

    I have a hobbie /"pet" project for my kids that I have been working on, mostly off, over the last couple of years. Have it up and operating on a 17" 10.4.7 system and wanted to move it to a 12" 10.4.7 for travelling ease. Everything for the project i

  • Shortcut Key v. Toolbar Button - Set in point/set out point

    I know that the shortcut keys to insert an in-point and out-point are Alt+[  and Alt+]  - but is there actually a button to add these points in Adobe After Effects CS6?   I'm terrible at remembering shortcut keys and can't believe that it doesn't app

  • Most commenly used abstract class in java.

    hi all, can anyone please tell me, what is most commonly used abstract class in java. this question was asked in interview.