Error while copying PIR from original plan

one requirment plan is there in system ,say X - Ver 00 (Product P1,P2,......P8 Demand is there of 10 ea for each product for 07/2007.)
I am using MD61, now I want to copy the same plan to another requirement plan Y (for 08/2007)
MD61 -> Entered req. plan no. as Y ver as 01 , References button on top left corner used , copy from original plan , in the dialogue box req. plan X entered , here system shows only P1 qty as 10 , for all other products from P2-P8 qty appears as blank. Select all & copy gives error.
No schedule lines exists for P2,.....P8.
Please explain.

Go to md61, select radio button -- req. plan no as --Y click on ref.
Copy from-Independent requirements-select-(green tick)-give req. plan no X (from where you want to copy all data)---select(green tick)
system will display old plan-select all-copysystem will disply p;lan which is copied from plan X-do the changes where you want. Save it.
Go to Md63-give req. plan no as Y--stystem will display the new plan

Similar Messages

Error while copying data from infoprovider to planning area

Hi,
Error for COM routine using application program (return code 40,075)
Message no. /SAPAPO/OM102
Diagnosis
An application program has called a COM routine. During the process, an error occurred.
I got the above error while copying data from infoprovider to planning area using t code TSCUBE.
How to resolve this?

Hi,
Is your issue resolved, If not please run MPOS consistency checks, Planning area consistency check and livecache consistency check.
Below are the programs for the same.
/SAPAPO/TS_lcm_cons_check
/SAPAPO/TS_PSTRU_TOOL
/SAPAPO/TS_PSTRU_CONS_CHECK
Regards
Kishore

Errors while copying queries from Infoset to DSO in BI 7.0. Why

Hi All,
I am trying to copy queries from Infoset to DSO in BI 7.0.
Message displayed after entering the data target names in Source Infocube (Infoset) & Target Infocube (DSO).
: Errors when reading InfoObjects for InfoCube (Infoset).
My Infoset has 2 queries.
I need to copy only one query to the DSO which is part of the infoset. How can we achieve this.
Please explain.
Thanks

Hi Murali,
who said the target is different.
The target is different in the sense, source is an Infoset & Target is an DSO.
This DSO is a part of the above Infoset.
RSZC works here but its giving errors as mentioned above.
Regenerate in the sense, u mean i need to create the same again on DSO.
Is there any other way.
If providing some solution, let it be clear.
Thanks.

Template error while copying page from another application

I am copying a page from one application to another within the same workspace. The page I am copying has several customized template that it uses. When I copy the page to the other application all goes well until I get to the step of assigning the Templates. Instead of seeing the list of templates used and being able to change them for the new page to match with the page i am copying, i get an error in the Templates area that says:
report error:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
Anyone else run into this? Is this because of the number of templates? I have added several new customized templates. The pages all work ok, its just when i am trying to copy a page from one application to another.
Thanks,
John

I'm seeing this behavior as well, but in the Authorization Schemes & LOV sections of the copy. I can continue with the page copy, but the LOV & Scheme information is lost and needs to be manually re-entered. Would love to get a fix for this!

Error while exporting artifacts from a planning app in 11.1.1.3

I've couple of planning applications which I am looking to migrate using LCM.I was able to export the artifacts of one of the application but for the other application (app name : TSPlan) I'm getting the following error message
Resource and its container folder have the same alias path and artifact id
Can someone tell me why I'm getting this error and what is the solution ?
Thanks in advance

The error messasge is due to the fomrs.I am trying to export the forms and getting this error message.
Resource and it's container folder have the same alias path and artifact id - /Plan Type/Core/Data Forms/Core/Cash Flow/Cash Flow.
Rest all is getting exported perfectly

Error while copying profile...

Error while copying profile from the default profile...
runtime error- DBIF_RSQL_INVALID_REQUEST
pls help..

Irfan,
You check weather new role name is in Z,Y name space or not?, check the same thing in other clients as well. If you are in windows , then your server mey need reboot because i faced similar problem but sorted after reboot.
Regards,
Hari.
PS: Points are welcome.

IPCC 20999 Error while dailing out from CTIOS

We are getting the following error while dailing out from the CTIOS softphone dail pad(Happening for one agent though). We are on Callmanger 6X and CTIOS 7.2X. Please see the sceenprint attached for the error message. Appreciate any help on this.

Aman,
I worked with Sean to resolve this issue today.
As Sean had stated, this particular agent had received a new physical phone because the original had failed. When the Service Desk created this new phone, they copied the old, changed the MAC, and saved the new phone. When this happened, the same DN's we're then assigned to two physical phones. Well... ICM doesn't like this too much at all.
1. I removed the old phone from being associated with the PG User account. It was still associated even though not in use.
2. I unasssigned all DN's from the old phone.
I believe it's the second piece that was causing the issue. 1 DN, 2 phones doesn't work to well! ;-)

Error while copying page template!

Copying of a simple page template fails in Portal 10.1.2 with the following error:
Internal error (WWC-00006)
Error while copying page. (WWC-44262)
An unexpected error occurred: ORA-20100:
ORA-06512: at "PORTAL.WWSBR_STDERR", line 437
ORA-06512: at "PORTAL.WWV_THINGDB", line 1816
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "PORTAL.WWSBR_API_URL", line 73
ORA-01403: no data found (WWC-44088)
An unexpected error occurred: ORA-20100:
ORA-06512: at "PORTAL.WWSBR_STDERR", line 437
ORA-06512: at "PORTAL.WWV_THINGDB", line 1816
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "PORTAL.WWSBR_API_URL", line 73
ORA-01403: no data found (WWC-44082)
An unexpected error occurred: ORA-20100:
ORA-06512: at "PORTAL.WWSBR_STDERR", line 437
ORA-06512: at "PORTAL.WWV_THINGDB", line 1816
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "PORTAL.WWSBR_API_URL", line 73
ORA-01403: no data found (WWC-44082)
An unexpected error has occurred (WWS-32100)
ORA-1: User-Defined Exception (WWC-36000)
No data found (WWS-32101)
I already had this error in Portal 9.0.4.

Hi Christian!
I already opened a TAR. As (according to the Portal docs) exporting Portal applications to future versions is not supported, waiting for another Portal release would mean starting our applications from the scratch. For this reason, bugfixes in future releases are of no really use in our case, and we definitely HAVE to find a solution for this quite crucial problem.
But thanks for this information.
Eckhard

New-AzureDeployment - Error while copying content to a stream

Hi All,
I am trying to deploy a packages using the Azure Powershell Cmdlets.
Each time I try to deploy a particular package, I get the following error message..
New-AzureDeployment : Error while copying content to a stream.
At line:1 char:1
+ New-AzureDeployment -DoNotStart -ServiceName $strStagingCCPDeploymentServiceName ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [New-AzureDeployment], HttpRequestException
+ FullyQualifiedErrorId : System.Net.Http.HttpRequestException,Microsoft.WindowsAzure.Commands.ServiceManagement.HostedServices.NewAzureDeploymentCommand
Looking at the inner exception I am getting
Unable to read data from the transport connection: The connection was closed.
The package itself is only 80mb and uploads to my blob storage successfully however when it tries to deploy using my config file the error occurs. The same config file works fine if I use the Azure Website to deploy the package, rather than the cmdlets
and I can deploy other packages successfully using PowerShell and using Visual Studio.
Thank you for any help you can provide.

Hi,
This seems to be a network issue, but it's quite strange as you can deploy the package from Visual Studio. Could you please try it on another machine (in another network environment if possible)? Also, can you try
to write a program and call the management API (http://msdn.microsoft.com/en-us/library/windowsazure/ee460813.aspx) to deploy it?
Best Regards,
Ming Xu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

"llegal character in path at index" Error While Using wsimport from ant.

Hi,
I am getting the following error, while using wsimport from ant build script. you have the details below. I dont have a clue on this error.
Error :
wsimport:
[echo] Generating the client stubs
[wsimport] error: Unable to parse "HelloService_schema1.xsd" : Illegal character in path at index 25: file:/D:/Study/WebService Eclipse Project/examples/jaxws/helloservice/service/server/wsdl/HelloService.wsdl#types?schema1
[wsimport] line 0 of file:/D:/Study/WebService Eclipse Project/examples/jaxws/helloservice/service/server/wsdl/HelloService.wsdl#types?schema1
[wsimport] error: Unable to parse "HelloService_schema1.xsd" : Illegal character in path at index 25: file:/D:/Study/WebService Eclipse Project/examples/jaxws/helloservice/service/server/wsdl/HelloService.wsdl#types?schema1
[wsimport] line ? of file:/D:/Study/WebService Eclipse Project/examples/jaxws/helloservice/service/server/wsdl/HelloService.wsdl#types?schema1
[wsimport] error: Element "{http://endpoint.helloservice/}sayHello" not found.
Java WebService :
package helloservice.endpoint;
import javax.jws.WebMethod;
import javax.jws.WebService;
@WebService()
public class Hello {
private String message = new String("Hello, ");
@WebMethod()
public String sayHello(String name) {
return message + name + ".";
Ant Build.xml
<project name="${project.name}" basedir="." default="ear">
     <property file="WS_build.properties"/>
     <target name="init">
          
          <echo description="Setting the path for the project"/>
          <path id="classpath">
               <fileset dir="${lib.dir}" includes="*.jar"/>
               <fileset dir="${commonWSLib.dir}" includes="*.jar"/>
          </path>
          
          <echo description="WSGEN Definition"/>
          <taskdef name="wsgen" classname="com.sun.tools.ws.ant.WsGen">
               <classpath>
                    <path refid="classpath"/>
               </classpath>
          </taskdef>
          
          <echo description="WSImport Definition" />
          <taskdef name="wsimport" classname="com.sun.tools.ws.ant.WsImport">
               <classpath>
                    <path refid="classpath"/>
               </classpath>
          </taskdef>
     </target>
     <target name="Compile" depends="init">
          <echo description="Compiling the project"/>
          <mkdir dir="${build.dir}"/>
          <mkdir dir="${build.dir}/classes"/>
          <javac destdir="${build.dir}/classes" srcdir="${java.base}">
               <classpath>
                    <path refid="classpath"/>
               </classpath>
          </javac>
          <copy todir="${build.dir}/classes">
               <fileset dir="${java.base}" excludes="**/*.java"/>
          </copy>
     </target>
     <target name="wsgen" depends="Compile">
               <echo message="Generating the wsdl file[${project.name}Service.wsdl]" />
               <mkdir dir="${service.dir}"/>
               <mkdir dir="${service.dir}/server"/>
               <mkdir dir="${service.dir}/server/classes"/>
               <mkdir dir="${service.dir}/server/src"/>
               <mkdir dir="${service.dir}/server/wsdl"/>
               <wsgen sei="${sei.class}" destdir="${service.dir}/server/classes" genwsdl="true"
               sourcedestdir="${service.dir}/server/src" resourcedestdir="${service.dir}/server/wsdl">
                    <classpath>
                         <path refid="classpath" />
                         <pathelement location="${build.dir}/classes" />
                    </classpath>
               </wsgen>
     </target>
     <target name="copy" depends="wsgen">
               <echo message="Copying class and config files into ${web-inf.dir} folder" />
               <copy todir="${web-inf.dir}">
                    <fileset dir="${build.dir}"/>
                    <fileset dir="${service.dir}/server" includes="**/*.class"/>
                    <fileset dir="." includes="${lib.dir}/*.jar"/>
               </copy>
               <copy todir="${web-inf.dir}/${lib.dir}">
                    <fileset dir="${commonWSLib.dir}" includes="*.jar"/>
               </copy>
               <copy todir="${web-inf.dir}">
                    <fileset dir="${web-inf.dir}" includes="**/*.xml"/>
               </copy>
     </target>
     
     <target name="war" depends="copy">
          <echo message="Creating the war file [${project.name}.war]" />
          <mkdir dir="${dist.dir}"/>
          <mkdir dir="${dist.dir}/server"/>
          <war destfile="${dist.dir}/server/${project.name}.war" webxml="${web-inf.dir}/web.xml" basedir="${web.dir}"/>
     </target>
     <target name="wsimport" depends="war">
          <echo message="Generating the client stubs" />
          <mkdir dir="${service.dir}"/>
          <mkdir dir="${service.dir}/client"/>
          <mkdir dir="${service.dir}/client/classes"/>
          <mkdir dir="${service.dir}/client/src"/>
          <wsimport wsdl="${basedir}/${service.dir}/server/wsdl/${project.name}.wsdl"
               destdir="${service.dir}/client/classes"
               package="${wsimport.package}"
               sourcedestdir="${service.dir}/client/src">
          </wsimport>
     </target>
     <target name="clientjar" depends="wsimport">
<echo message="Creating the client jar file [${project.name}Client.jar] " />
<copy todir="${service.dir}/client/classes">
<fileset dir="${service.dir}/client/src"/>
</copy>
<mkdir dir="${dist.dir}/client"/>
               <tstamp>
               <format property="TODAY" pattern="yyyy-MM-dd hh:mm:ss" />
               </tstamp>
<jar destfile="${dist.dir}/client/${project.name}Client.jar"
basedir="${service.dir}/client/classes">
               <manifest>
               <attribute name="Built-By" value="${user.name}"/>
               <attribute name="Built-Date" value="${TODAY}"/>
               <attribute name="Implementation-Version" value="${version}-b${build.number}"/>
          </manifest>
          </jar>
<mkdir dir="${dist.dir}/client"/>
     </target>
     
     <target name="enginejar" depends="clientjar">
     <echo message="Creating the engine jar file for local call [${project.name}.jar] " />
          
          <tstamp>
               <format property="TODAY" pattern="yyyy-MM-dd hh:mm:ss" />
          </tstamp>
     <jar destfile="${dist.dir}/server/${project.name}.jar"
     basedir="${build.dir}/classes">
               <manifest>
                    <attribute name="Built-By" value="${user.name}"/>
                    <attribute name="Built-Date" value="${TODAY}"/>
                    <attribute name="Implementation-Version" value="${version}-b${build.number}"/>
          </manifest>
          </jar>
          </target>
          
          <target name="ear" depends="enginejar" >
               <echo message="Creating the ear file [${project.name}.ear]" />
               <ear destfile="${dist.dir}/server/${project.name}.ear" appxml="META-INF/application.xml">
               <fileset dir="${dist.dir}/server" includes="${project.name}.war"/>
          </ear>
               <antcall target="clean"></antcall>
          </target>
          
          <target name="clean">
               <echo message="Cleaning up folders " />
               <delete dir="${build.dir}"/>
               <delete dir="${service.dir}"/>
               <delete dir="${web-inf.dir}/classes"/>
               <delete dir="${web-inf.dir}/lib"/>
               <echo message="${project.name}.ear, ${project.name}.war, ${project.name}.jar and ${project.name}Client.jar is available in project's ${dist.dir} folder"/>
          </target>
</project>
Generated wsdl(HelloService.wsdl) :
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<definitions targetNamespace="http://endpoint.helloservice/" name="HelloService" xmlns:tns="http://endpoint.helloservice/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns="http://schemas.xmlsoap.org/wsdl/">
<types>
<xsd:schema>
<xsd:import namespace="http://endpoint.helloservice/" schemaLocation="HelloService_schema1.xsd"/>
</xsd:schema>
</types>
<message name="sayHello">
<part name="parameters" element="tns:sayHello"/>
</message>
<message name="sayHelloResponse">
<part name="parameters" element="tns:sayHelloResponse"/>
</message>
<portType name="Hello">
<operation name="sayHello">
<input message="tns:sayHello"/>
<output message="tns:sayHelloResponse"/>
</operation>
</portType>
<binding name="HelloPortBinding" type="tns:Hello">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document"/>
<operation name="sayHello">
<soap:operation soapAction=""/>
<input>
<soap:body use="literal"/>
</input>
<output>
<soap:body use="literal"/>
</output>
</operation>
</binding>
<service name="HelloService">
<port name="HelloPort" binding="tns:HelloPortBinding">
<soap:address location="REPLACE_WITH_ACTUAL_URL"/>
</port>
</service>
</definitions>
Generated : HelloService_schema1.xsd
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<xs:schema version="1.0" targetNamespace="http://endpoint.helloservice/" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:element name="sayHello" type="ns1:sayHello" xmlns:ns1="http://endpoint.helloservice/"/>
<xs:complexType name="sayHello">
<xs:sequence>
<xs:element name="arg0" type="xs:string" minOccurs="0"/>
</xs:sequence>
</xs:complexType>
<xs:element name="sayHelloResponse" type="ns2:sayHelloResponse" xmlns:ns2="http://endpoint.helloservice/"/>
<xs:complexType name="sayHelloResponse">
<xs:sequence>
<xs:element name="return" type="xs:string" minOccurs="0"/>
</xs:sequence>
</xs:complexType>
</xs:schema>
If u need any other information let me know.

This has been resolved by uploading relevant jar file

Error while copying and pasting group of activities

Hi,
I am getting an error while copying and pasting a group of activities. Can anyone let me know why I am getting this message.
type : EStringListError
Event Code : SLDNA-0655-B
Description : String list does not allow duplicates
thank you.

I had the same error and reported it to Oracle. They requested an XER copy and I am waiting for thier response. This problem is for that particular project only. To work around it do the following:
Create a new project, open both projects, go to wbs view, copy all wbs's from the correpted project to the new project. The new project will work fine and get rid of the correpted one.
Good Luck.

There was an error while copying to Clipboard. An internal error occurred.

Hello
I'm running a Citrix Presentation Server 4.5 environment, based on Windows Server2003 and providing Adobe Reader as a published application (this issue appears with Adobe Reader 7 and Adobe Reader 8 equally).
Sometimes when trying to copy test from a pdf document, the error message "There was an error while copying to Clipboard. An internal error occurred." appears. The selected text is still copied to the clipboard, so the message seems to be more of a warning, but it's confusing for the end-users. This happens equally when copying via 'Ctrl-C' or with the mouse (right-click & copy).
It is not a problem with the document itself since sometimes the error appears and sometimes not on the same document. This happens for all documents I've tried so far.
Additional information: On the servers also MS Office 2003 SP3 is installed. I have the feeling that it may be an interference with the Office Clipboard, but I can't put my finger on it...
Please, has anyone found a solution for this?
Thanks
Andy

in windows 7
start-control panel-uninstall programs
uninstall the "Skype Click to Call", this will uninstall addins from ie, firefox, you dont have to uninstall skype.
in ie and firefox you can disable addons but can not uninstall them using ie or firefox interface, when you uninstall Skype Click to Call, it will remove it from all added browsers.
This works me now.
Edit 1:
Unfortunately skype trick does not work.
I recently switched to windows 8 and reliazed that there is no copy error any more.
Edit2:
This error maybe caused by Babylon dictionary which has an Adobe Acrobat or Reader addon which captures the text from pdf documnet when ctrl+right mouse click. This feature is enabled when it is copied to" C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\plug_ins " or "C:\Program Files (x86)\Adobe\Reader 9.0\Reader\plug_ins " directory, so if it is copied such copying error appeared, if not copied it does not appear. Baylon dictionary addin is installed when you install babylon dictionary software, and it is here " C:\Program Files (x86)\Babylon\Babylon-Pro\Utils ", its name is " BabylonRPI.api "
Edit3:06-April-2013
My experience is that Babylon Dictionary was causing this error. With babylon version 10 acrobat does not give that kind of error anymore, on windows 7 x64, but previous version leftover files may cause this error again even if you remove previous versions and install version 10. With a clean install of windows 7 x64 with babylon dictionary version 10 there is no error anymore.Uninstalling previous versions of Babylon using third party uninstalling software like Revo or Uninstall Tool may help without reinstalling Windows.

Error while creating subsite from site template

Hi,
I am getting below error while creating subsite from existing site template .
Sachin Bhosale

There must be a duplicate Email field created in any list/library. The cause can be identified by renaming the site template to sitename.cab > extact the cab file > open the manifest file search for email and see where it is associated. Refer
to the following blog post for more information
http://sharepointserved.blogspot.com/2012/11/a-duplicate-name-was-found.html
http://sharepoint.stackexchange.com/questions/11944/error-when-creating-a-site-from-custom-template-a-duplicate-field-name-name
Cheers,

Error while copying page. (WWC-44262)

Error while copying page. (WWC-44262)
An unexpected error occurred: User-Defined Exception (WWC-44088)
An unexpected error occurred: User-Defined Exception (WWC-44082)
An unexpected error occurred: User-Defined Exception (WWC-44082)
Error while copying page. (WWC-44262)
Please specify a valid Name and Display Name. (WWC-44102)
I am not able to make a copy of a page.

Hi,
Did you get an answer for this problem?
Karl

Error while updating data from PSA to ODS

Hi Sap Gurus,
I am facing the error while updating data from PSA to ODS in BI 7.0
The exact error message is:
The argument 'TBD' cannot be interpreted as a number
The error was triggered at the following point in the program:
GP44QSI5RV9ZA5X0NX0YMTP1FRJ 5212
Please suggest how to proceed on this issue.
Points will be awarded.

Hi ,
Try to simulate the process.That can give you exact error location.
It seems like while updating few records may be no in the format of the field in which it is updated.
Regards
Rahul Bindroo

Error while copying PIR from original plan

Similar Messages

Maybe you are looking for