"Error While copying query using RSZC

Hi Community,
I am trying to copy queries from Info Cube to Multiprovider using RSZC, I got error called
"InfoObject 0MATERIAL__0DIVISION missing from target InfoCube ZSCMIM_M1"
"InfoObject 0MATERIAL__MATL_CAT missing from target InfoCube ZSCMIM_M1"
"InfoObject 0MATERIAL__MATL_GROUP missing from target InfoCube ZSCMIM_M1"
"InfoObject 0MATERIAL__MATL_TYPE missing from target InfoCube ZSCMIM_M1"
"InfoObject 0PLANT_COUNTRY missing from target InfoCube ZSCMIM_M1"
I created Multiprovider with one basic info cube in BI 7.0. by draging dimensions,keyfigure, Unit, time from left to right than I selected the "Select key figures Icon" --> Selected Create proposal for all Infoobjects" same as for Charecteristics.
I checked the attributes and charecterisctics they are active. Please help me ....
Regds
Dave.

Hi Bhanu,
There are so many other Navigation Attributes for 0Material and 0Plant info objects but I can only see this few attributes as error. I have a dought can I copy queries from Info Cube to Multiprovider. Please is there any particular reason .... I am getting this errr..... Please help me...
Regds
Dave.

Similar Messages

Error while copy query between infocubes

I was trying to copy a query between infocubes and ended with error message.
Query copied from Infocube A to Infocube B. Infocube B has an additional dimension with 2 char's when compared to infocube A.
Using transaction RSZC, I tried to copy the query, but ended up with following error..
1.Program error in class COPY_QRY_TO_CUBE method : UNCAUGHT_EXCEPTION
2.An exception with the type CX_SY_OPEN_SQL_DB occurred, but was neither handled locally, nor declared in a RAISING clause
3.The system tried to insert a data record, even though a data record with the same primary key already exists
I also tried using function module RSZ_I_COPY_QRY_TO_CUBE, which was of no help. I get the following message with the function module...
1. Program error in class RS_TESTFRAME_CALL method : UNCAUGHT_EXCEPTION
2. An exception with the type CX_SY_OPEN_SQL_DB occurred, but was neither handled locally, nor declared in a RAISING clause
3. The system tried to insert a data record, even though a data record with the same primary key already exists
I have also tried a solution in BW expert by using debugging mode of the above function module, again this was of no help..
I am BI 7.0 SP09...
Any ideas, Please....
Thanks,
RR
Message was edited by:
Ray R

Hello,
Are you trying to copy Business Content delivered Queries?
I had also got this error when copying over all queries from one cube to another. Reason for this message was plain simple - I did not realise that the sender Cube had Business Content Query which we cannot copy over using RSZC as system tries to create another query with suffix as 0****_1. We cannot create query in SAP user namespace. Error message is different then the reason behind it.
Thanks
Ravi

Error while accessing Query using Query Analyzer

dear experts...
while accesiing the query using query analayzer...
we are getting below error...
What has happened?
URL http://xxx.xxx.xxx.xx:XXXX/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex call was terminated because the corresponding service is not available.
Note
The termination occurred in system BI1 with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:001-u:ANAND-l:E-i:PSRCCPRDA003_BI1_00-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
thanks for helping me...
anand

Hi friends,,
instead of getting the link like
http://128.222.125.57:9000/sap/bw/bex?cmd=ldoc&infocube=ZMC_SRH1&query=AGINGV21A&sap-language=EN(working link)
am getting below link...which is getting an error....
http://128.222.125.57:9000/sap/bw/://:/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=AGINGV21A
above marked is the unwanted thing so how can i change my link in query designer???
please suggest me firneds

Error while trying to use '{' in the query

Hi,
The below mentioned query is giving Error while trying to use '{'
Query:
select s,x from table(SEM_MATCH(
'{?s rdf:type <http://www.cs.com/sbip/dwh/mdm/data_modeling#Base_Term> .
?s ?p ?x}',
SEM_Models('foundation'),
SEM_RuleBases('OWLPRIME'),
SEM_ALIASES(SEM_ALIAS('dm','http://www.cs.com/sbip/dwh/mdm/data_modeling#'),
SEM_ALIAS('owl','http://www.w3.org/2002/07/owl#')), null, 'INVALID'))
where regexp_like(x,'Customers','i');
Error details:
ORA-29532: Java call terminated by uncaught Java exception: oracle.spatial.rdf.server.TokenMgrError: Lexical error at line 1, column 1. Encountered: "{" (123), after : ""
ORA-06512: at "MDSYS.RDF_MATCH_IMPL_T", line 178
ORA-06512: at "MDSYS.RDF_MATCH_IMPL_T", line 67
ORA-06512: at line 4
I am unable to use Option, Filter in query.
Any solution?
Please let me know do i need to apply any patch?
Note: I am using Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
Regards,
Kavitha.

Hi,
For OPTIONAL support in 11.1.0.7.0, you need the following patch
Patch 7600122: CURLY BRACE SYNTAX,VIRTUAL MODELS, NETWORK INDEXES AND HINTO FRAMEWORK SUPPORT
Support for SPARQL FILTERs in SEM_MATCH is not available for 11.1.0.7.0. You will need version 11.2.0.1.0 or later for FILTER support. With 11.2.0.1.0, we recommend that you apply our latest patch set:
Patch 9819833: SEMANTIC TECHNOLOGIES 11G R2 FIX BUNDLE 2
All of the above patches are available through My Oracle Support.
Thanks,
Matt

Error after Copying Query from Cube to Multiprovider

Hi ,
I have One cube which is running fine . Now I have created one Multiprivider which has only the Cube . Copied the Query in the Cube to the Multiprovider through RSZC transaction .
Now the Query copied to Multiprovider is giving error while executing .some SALAR etc ...
Not sure what does this error mean .
can anyone help me pls ?
Thanks
pankaj

Hi
While copying the query using RSZC it will list all the calculated keyfigures you can select the specific keyfigure and click on transfer selections.
Thanks

Error while executing query in OLAP server

Dear all,
we are using APD to extracted sales data for the last 3 months .this APD was executed perfectly till yesterday.
in today's run APD got failed with error message as below
"@5C\QError@ Fiscal year variant Z3 is not maintained for calendar year 9999
"@5C\QError@ Error while executing query in OLAP server; redesign query.
Please suggest corrective action .
I have tried executing manually with less selections on creation date by no success..
regards,
puru

Purushotham wrote:
Hi Jeeth,
>
> in query we have selection for " currency type " and created on " .we are not using fiscal year variant.
>
> in first strep of APD design only we have a problem and also recently there are no changes to this APD .
>
> It was executed perfectly on till 4th .
>
> Edited by: Purushotham on Feb 6, 2012 12:48 PM
Dear Purushotham, You can maintain the Fiscal year Variant in OB29. 2 possibilities, #1 : Data for the FYV/Year could be wrong. #2 : Updates for Fiscal Year might not have been done. You can maintaine FY varients up to FY 2XXX in your BW system. This should fix the error. The table T009 must be the same as we get when we do OB29 TCode in BW, so via SPRO do rebuild of table again.
Edited by: Arun Bala G on Feb 6, 2012 4:05 PM

Error while copying page template!

Copying of a simple page template fails in Portal 10.1.2 with the following error:
Internal error (WWC-00006)
Error while copying page. (WWC-44262)
An unexpected error occurred: ORA-20100:
ORA-06512: at "PORTAL.WWSBR_STDERR", line 437
ORA-06512: at "PORTAL.WWV_THINGDB", line 1816
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "PORTAL.WWSBR_API_URL", line 73
ORA-01403: no data found (WWC-44088)
An unexpected error occurred: ORA-20100:
ORA-06512: at "PORTAL.WWSBR_STDERR", line 437
ORA-06512: at "PORTAL.WWV_THINGDB", line 1816
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "PORTAL.WWSBR_API_URL", line 73
ORA-01403: no data found (WWC-44082)
An unexpected error occurred: ORA-20100:
ORA-06512: at "PORTAL.WWSBR_STDERR", line 437
ORA-06512: at "PORTAL.WWV_THINGDB", line 1816
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "PORTAL.WWSBR_API_URL", line 73
ORA-01403: no data found (WWC-44082)
An unexpected error has occurred (WWS-32100)
ORA-1: User-Defined Exception (WWC-36000)
No data found (WWS-32101)
I already had this error in Portal 9.0.4.

Hi Christian!
I already opened a TAR. As (according to the Portal docs) exporting Portal applications to future versions is not supported, waiting for another Portal release would mean starting our applications from the scratch. For this reason, bugfixes in future releases are of no really use in our case, and we definitely HAVE to find a solution for this quite crucial problem.
But thanks for this information.
Eckhard

New-AzureDeployment - Error while copying content to a stream

Hi All,
I am trying to deploy a packages using the Azure Powershell Cmdlets.
Each time I try to deploy a particular package, I get the following error message..
New-AzureDeployment : Error while copying content to a stream.
At line:1 char:1
+ New-AzureDeployment -DoNotStart -ServiceName $strStagingCCPDeploymentServiceName ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [New-AzureDeployment], HttpRequestException
+ FullyQualifiedErrorId : System.Net.Http.HttpRequestException,Microsoft.WindowsAzure.Commands.ServiceManagement.HostedServices.NewAzureDeploymentCommand
Looking at the inner exception I am getting
Unable to read data from the transport connection: The connection was closed.
The package itself is only 80mb and uploads to my blob storage successfully however when it tries to deploy using my config file the error occurs. The same config file works fine if I use the Azure Website to deploy the package, rather than the cmdlets
and I can deploy other packages successfully using PowerShell and using Visual Studio.
Thank you for any help you can provide.

Hi,
This seems to be a network issue, but it's quite strange as you can deploy the package from Visual Studio. Could you please try it on another machine (in another network environment if possible)? Also, can you try
to write a program and call the management API (http://msdn.microsoft.com/en-us/library/windowsazure/ee460813.aspx) to deploy it?
Best Regards,
Ming Xu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error while activating query element.

Dear All
Can any one tell this error .
When iam transporting the queries to BI production there is an errror in Transportation log that error while activating query element.
But the querysis fine in Bi quality.
Error : Error while activating "6899QYGVHJPGYUBLKA9SPHORZ".

Hi
Might be that query element was deleted(not used n was used before in dev) while creating cross check once in your query.
First check what is that element which is not transported?
use table RSZELTDIR to find out weather its a Var or CKF or RKF etc...
then check for the same in the query in QA weather its active and ported fine to QA if not try to collect the element and transport to QA in a separate request.
Regards
KP

Error while copying data from infoprovider to planning area

Hi,
Error for COM routine using application program (return code 40,075)
Message no. /SAPAPO/OM102
Diagnosis
An application program has called a COM routine. During the process, an error occurred.
I got the above error while copying data from infoprovider to planning area using t code TSCUBE.
How to resolve this?

Hi,
Is your issue resolved, If not please run MPOS consistency checks, Planning area consistency check and livecache consistency check.
Below are the programs for the same.
/SAPAPO/TS_lcm_cons_check
/SAPAPO/TS_PSTRU_TOOL
/SAPAPO/TS_PSTRU_CONS_CHECK
Regards
Kishore

Time Machine Error Message: Errors while copying to this drive

PLEASE someone help me! I've used Time Machine since it's inception, and suddenly I'm getting these error messages that are not helpful. I'm not a computer expert, I don't know much about file extensions (re: discussions about removing certain files), and really am lost about what to do. I've rebooted, I've purchased TWO new external drives (sitting here with nothing on them) -- I haven't backed up in a month -- and I'm very concerned about this. Do I need to use an online backup system? I really would like help with this. Again -- I'm attempting to backup using Time Machine and keep getting the error message: Unable to complete backup. Errors while copying files to the drive. I've been on the phone with Apple Support -- and I get started on a new backup (it will actually begin to backup) and in a few minutes I get the error message. Are there certain files to delete? I'm certainly willing to do that -- but I need specific instructions about where to find them and how to delete them. Many thanks.

I have been having the same problem. I haven't backed up since June 4 and I tried yesterday and I got the message about errors while copying the files to the drive. I tried it again and again, but no dice. I have been using Time Machine without incident since I bought my White Macbook (late 2007).

There was an error while copying to Clipboard. An internal error occurred.

Hello
I'm running a Citrix Presentation Server 4.5 environment, based on Windows Server2003 and providing Adobe Reader as a published application (this issue appears with Adobe Reader 7 and Adobe Reader 8 equally).
Sometimes when trying to copy test from a pdf document, the error message "There was an error while copying to Clipboard. An internal error occurred." appears. The selected text is still copied to the clipboard, so the message seems to be more of a warning, but it's confusing for the end-users. This happens equally when copying via 'Ctrl-C' or with the mouse (right-click & copy).
It is not a problem with the document itself since sometimes the error appears and sometimes not on the same document. This happens for all documents I've tried so far.
Additional information: On the servers also MS Office 2003 SP3 is installed. I have the feeling that it may be an interference with the Office Clipboard, but I can't put my finger on it...
Please, has anyone found a solution for this?
Thanks
Andy

in windows 7
start-control panel-uninstall programs
uninstall the "Skype Click to Call", this will uninstall addins from ie, firefox, you dont have to uninstall skype.
in ie and firefox you can disable addons but can not uninstall them using ie or firefox interface, when you uninstall Skype Click to Call, it will remove it from all added browsers.
This works me now.
Edit 1:
Unfortunately skype trick does not work.
I recently switched to windows 8 and reliazed that there is no copy error any more.
Edit2:
This error maybe caused by Babylon dictionary which has an Adobe Acrobat or Reader addon which captures the text from pdf documnet when ctrl+right mouse click. This feature is enabled when it is copied to" C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\plug_ins " or "C:\Program Files (x86)\Adobe\Reader 9.0\Reader\plug_ins " directory, so if it is copied such copying error appeared, if not copied it does not appear. Baylon dictionary addin is installed when you install babylon dictionary software, and it is here " C:\Program Files (x86)\Babylon\Babylon-Pro\Utils ", its name is " BabylonRPI.api "
Edit3:06-April-2013
My experience is that Babylon Dictionary was causing this error. With babylon version 10 acrobat does not give that kind of error anymore, on windows 7 x64, but previous version leftover files may cause this error again even if you remove previous versions and install version 10. With a clean install of windows 7 x64 with babylon dictionary version 10 there is no error anymore.Uninstalling previous versions of Babylon using third party uninstalling software like Revo or Uninstall Tool may help without reinstalling Windows.

Error while creating stock using tcode: MB1C

Error while creating stock using tcode: MB1C
The Error is: Check table T004F:entry G006 does not exist

Hi ,
Please check the FSV (field status variant) for your company code in OBY6 .
then go to transaction code OB14 --> enter the FSV --> Check if field status group G006(Material account) is maintained there or not.
if not please maintain it.
Thanks & Regards
Anshu

Error while migrating users using CSSImportExportUtility

Error while migrating users using CSSImportExportUtility
I'm tring to export all user and group information from a Hyperion Shared Services 9.2.1 by using CSSExport.bat
When there was only native directory in HSS, i can export these information successfully.
But when I enabled NTLM external user authentication following error occurred:
Exception in thread "main" java.lang.UnsatisfiedLinkError: getOSVersion
at com.hyperion.css.spi.impl.ntlm.NTLMProvider.getOSVersion(Native Metho
d)
at com.hyperion.css.spi.impl.ntlm.NTLMProvider.<clinit>(Unknown Source)
at com.hyperion.css.spi.impl.ntlm.NTLMConnectionClient.getUsers(Unknown
Source)
at com.hyperion.css.CSSAPIExtnImpl.getUsers(Unknown Source)
at com.hyperion.css.CSSAPIImpl.getUsers(Unknown Source)
at com.hyperion.css.CSSAPIImpl.initialize(Unknown Source)
at com.hyperion.css.exchange.NativeProviderManager.<init>(Unknown Source
at com.hyperion.css.exchange.ImportExportManager.cssExport(Unknown Sourc
e)
at com.hyperion.css.exchange.CommandUtility.run(Unknown Source)
at com.hyperion.css.exchange.CommandUtility.main(Unknown Source)
I searched reference documents on the web, found this article: (http://download.oracle.com/docs/cd/E12825_01/epm.111/readme/mdm_111110_readme.html)
Troubleshooting Tip: If HSS is configured for an NTLM provider, DRM services may not start due to error: "Exception Emdm_Exception with message 'Could not Initialize CSS. Error: 'getOSVersion'."
You may receive the following error after clicking the "Enable CSS" button in DRM Console: “LoadLibrary("C:\Hyperion\Master Data Management\mdm_ntier_css_validator.dll") failed - The specified module could not be found.”
To resolve both of these conditions, update the Windows System Path on the Data Relationship Management server with the applicable JRE and CSS pathing below.
NOTE: Reboot the Data Relationship Management server machine after making any changes to the Windows Path.
NOTE: Ensure that only one JRE version and one CSS version are referenced in the Windows Path.
? For HSS 9.3.1:
%HYPERION_HOME%\common\JRE\Sun\1.5.0\bin;%HYPERION_HOME%\common\JRE\Sun\1.5.0\bin\client;%HYPERION_HOME%\common\CSS\9.3.1\bin;
? For HSS 9.3.0:
%HYPERION_HOME%\common\JRE\Sun\1.5.0\bin;%HYPERION_HOME%\common\JRE\Sun\1.5.0\bin\client;%HYPERION_HOME%\common\CSS\9.3.0\bin;
? For HSS 9.2.0.3:
%HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin;%HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin\client;%HYPERION_HOME%\common\CSS\9.2.0.3\bin;
? For HSS 9.2.0:
%HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin;%HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin\client;%HYPERION_HOME%\common\CSS\9.2.0\bin;
I found these is no directory "%HYPERION_HOME%\common\CSS\9.2.0\bin;" exists but "%HYPERION_HOME%\common\CSS\9.2.1\bin;"
I configured PATH by setting to above, and tried CSSExport again, still failed.
Than I disabled the NTLM is HSS, tried CSSExport again. It was successful.
So I am convinced that the problem caused by NTLM or PATH environment variable or some files associated.
Does anybody know the solution ?

I recommend you upgrade at least to 10.1.0.5. 10.1.0.2 comes with the very first version of csalter.plb, which has not the current implementation. From and to which character set do you try to migrate?
-- Sergiusz

Error while Loading Budgets Using AMG

Error while Loading Budgets Using AMG
Dear All,
I am trying to load Budgets into ORACLE Projects using AMG API's..
I have developed PL/SQL which uses below procedures of pa_budget_pub package.
init_budget;
load_budget_line;
execute_draft_budget;
baseline_budget;
Procedure execute_create_draft_budget fails with following error message.
error message: Please enter a valid product code for this project.
error message: You entered an invalid API parameter.Please enter valid parameter and try again. Parameter Name: Resource List Parameter Value: 1446
error message: Project: AC044. Please specify a valid resource list.
error message: Project: AC044. Please specify a valid resource list.
Could somebody explain me how to resolve this error message and load the budget lines.
Thanks in Advance.
Afsal Basha.

What I'm saying is, verify the column name. Dont post if not possible.
Example follows, with one table intentionally "hidden".
SQL> create table "tEsT" ("MaxNumber" float, "MaxnumbeR" number);
SQL> select table_name,column_name from user_tab_columns where table_name like 't%';
TABLE_NAME                     COLUMN_NAME
tEsT                           MaxNumber
tEsT                           MaxnumbeR
teST                           iD
teST                           MaxNumberHth,
Fredrik

"Error While copying query using RSZC

Similar Messages

Maybe you are looking for