Error while create/change configuration an application

Hi,
while doing the configuration application.
when i am trying to create/change configuration an application.
i am getting following error.
Error:
Service cannot be reached
What has happened?
URL http://os1gvzg.gemsconsult.com:8000/sap/bc/webdynpro/sap/configure_application call was terminated because the corresponding service is not available.
Note
The termination occurred in system RT1 with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:os1gvzg_RT1_00-v:0-s:403-r:Forbidden
HTTP 403 - Forbidden
Your SAP Internet Communication Framework Team
can anybody help me out.
thanks in advance,
Kiran.

Hi,
please check [documentation|http://help.sap.com/saphelp_nw2004s/helpdata/en/77/3545415ea6f523e10000000a155106/frameset.htm]
grtz,
Koen

Similar Messages

Error while creating/changing/desplay cost element

Gents
Need urgent help. I am getting a below error while creating/changing/Displaying the cost element.
Table CI_CSKB is not an active table
Message no. AD 228
Kindly help me to get the resolve this issue.
Thanks and Regards
Vinay Thakre

hi
In Cost Elements (Data is Dependent on Controlling Area), please go to extras and check your controlling area while creating the cost element, and make sure if u r creating Primary CE, it has been created as a G/L account and also make sure you use correct CE Category.
Thanks
plz award points if helpful.

Error while Creating a basic portal application using JDeveloper

Hi,
I am trying to build a portal application using the following tutorial on JDeveloper 11.1.1.5.0 on Windows XP.
[http://download.oracle.com/docs/cd/E17904_01/webcenter.1111/e10273/createapp.htm#CCHEGDIC|http://download.oracle.com/docs/cd/E17904_01/webcenter.1111/e10273/createapp.htm#CCHEGDIC]
I have configured all the prereqs for this tutorial. When i run the application, following message appears on the log file.
Target Portal.jpr is not runnable, using default target index.html.
and the webpage contains following error
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
+10.4.5 404 Not Found+
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
Following is the WLS log for the application run.
+[12:53:24 PM] ---- Deployment started. ----+
+[12:53:24 PM] Target platform is (Weblogic 10.3).+
+[12:53:24 PM] Retrieving existing application information+
+[12:53:24 PM] Running dependency analysis...+
+[12:53:24 PM] Deploying 3 profiles...+
+[12:53:28 PM] Wrote MAR file to C:\Documents and Settings\ahmedh\Application Data\JDeveloper\system11.1.1.5.37.60.13\o.j2ee\drs\NTSL_PORTAL\AutoGeneratedMar+
+[12:53:31 PM] Wrote Web Application Module to C:\Documents and Settings\ahmedh\Application Data\JDeveloper\system11.1.1.5.37.60.13\o.j2ee\drs\NTSL_PORTAL\NTSL_PortalWebApp.war+
+[12:53:32 PM] Info: Namespace '/oracle/adf/share/prefs' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[12:53:32 PM] Info: Namespace '/oracle/webcenter/lifecycle/importexport' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[12:53:32 PM] Info: Namespace '/oracle/webcenter/lock' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[12:53:32 PM] Info: Namespace '/oracle/webcenter/rc' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[12:53:32 PM] Info: Namespace '/persdef' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[12:53:32 PM] Info: Namespace '/shared/oracle/wcps' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[12:53:32 PM] Info: Namespace '/xliffBundles' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[12:53:32 PM] Info: Namespace '/oracle/webcenter/search/scopedMD' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[12:53:32 PM] Info: Namespace '/oracle/webcenter/framework/scope/scopedMD' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[12:53:32 PM] Info: Namespace '/oracle/webcenter/page/scopedMD' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[12:53:32 PM] Info: Namespace '/pageDefs' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[12:53:32 PM] Info: Namespace '/oracle/adf/portlet' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[12:53:32 PM] Info: Namespace '/oracle/adf/portletappscope' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[12:53:32 PM] Info: Namespace '/oracle/webcenter/doclib/scopedMD' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[12:53:32 PM] Info: Namespace '/oracle/webcenter/portalapp' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[12:53:32 PM] Info: Namespace '/oracle/webcenter/security/scopedMD' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[12:53:32 PM] Info: Namespace '/oracle/webcenter/siteresources/shared' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[12:53:32 PM] Info: Namespace '/oracle/webcenter/quicklinks/scopedMD' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[12:53:32 PM] Info: Any customizations created while running the application will be written to 'C:\Documents and Settings\ahmedh\Application Data\JDeveloper\system11.1.1.5.37.60.13\o.mds.dt\adrs\NTSL_PORTAL\AutoGeneratedMar\mds_adrs_writedir'.+
+[12:53:35 PM] Wrote Enterprise Application Module to C:\Documents and Settings\ahmedh\Application Data\JDeveloper\system11.1.1.5.37.60.13\o.j2ee\drs\NTSL_PORTAL+
+[12:53:35 PM] Deploying Application...+
+<Jul 25, 2011 12:53:44 PM GMT+05:00> <Warning> <J2EE> <BEA-160140> <Unresolved optional package references (in META-INF/MANIFEST.MF): [Extension-Name: oracle.apps.common.resource, referenced from: C:\Documents and Settings\ahmedh\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\tmp\_WL_user\oracle.webcenter.framework\owur7d]. Make sure the referenced optional package has been deployed as a library.>+
+<Jul 25, 2011 12:53:53 PM GMT+05:00> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element web-app in the deployment descriptor in C:\Documents and Settings\ahmedh\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\tmp\_WL_user\jaxrs-framework-web-lib\829i9k\WEB-INF\web.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>+
+<ADFContext> <getCurrent> Automatically initializing a DefaultContext for getCurrent.+
Caller should ensure that a DefaultContext is proper for this use.
Memory leaks and/or unexpected behaviour may occur if the automatic initialization is performed improperly.
This message may be avoided by performing initADFContext before using getCurrent().
To see the stack trace for thread that is initializing this, set the logging level of oracle.adf.share.ADFContext to FINEST
+<EclipseLinkLogger> <basicLog> 2011-07-25 12:54:27.409--ServerSession(28900695)--PersistenceUnitInfo ServiceFrameworkPUnit has transactionType RESOURCE_LOCAL and therefore jtaDataSource will be ignored+
+<ADFContext> <getCurrent> Automatically initializing a DefaultContext for getCurrent.+
Caller should ensure that a DefaultContext is proper for this use.
Memory leaks and/or unexpected behaviour may occur if the automatic initialization is performed improperly.
This message may be avoided by performing initADFContext before using getCurrent().
To see the stack trace for thread that is initializing this, set the logging level of oracle.adf.share.ADFContext to FINEST
+<LoggerHelper> <log> Cannot map nonserializable type "interface oracle.adf.mbean.share.config.runtime.resourcebundle.BundleListType" to Open MBean Type for mbean interface oracle.adf.mbean.share.config.runtime.resourcebundle.AdfResourceBundleConfigMXBean, attribute BundleList.+
+[12:54:48 PM] Application Deployed Successfully.+
+[12:54:48 PM] Elapsed time for deployment: 1 minute, 24 seconds+
+[12:54:48 PM] ---- Deployment finished. ----+
Run startup time: 84155 ms.
+[Application NTSL_PORTAL deployed to Server Instance IntegratedWebLogicServer]+
Target URL -- http://127.0.0.1:7101/mytutorial/index.html
+<JUApplicationDefImpl> <logDefaultDynamicPageMapPattern> The definition at NTSL.portal.portal.DataBindings.cpx, uses a pagemap pattern match that hides other cpx files.+
+<NavigationCatalogException> <<init>> oracle.adf.rc.exception.DefinitionNotFoundException: cannot find resource catalog using MDS reference /oracle/webcenter/portalapp/navigations/default-navigation-model.xml Root Cause=[MDS-00013: no metadata found for metadata object "/oracle/webcenter/portalapp/navigations/default-navigation-model.xml"] [Root exception is oracle.mds.core.MetadataNotFoundException: MDS-00013: no metadata found for metadata object "/oracle/webcenter/portalapp/navigations/default-navigation-model.xml"]+
+<SkinFactoryImpl> <getSkin> Cannot find a skin that matches family portal and version v1.1. We will use the skin portal.desktop.+
+<Logger> <error> ServletContainerAdapter manager not initialized correctly.+
+[Application termination requested. Undeploying application NTSL_PORTAL.]+
+[01:04:42 PM] ---- Deployment started. ----+
+[01:04:42 PM] Target platform is (Weblogic 10.3).+
+[01:04:42 PM] Undeploying Application...+
+<Jul 25, 2011 1:04:42 PM GMT+05:00> <Warning> <Deployer> <BEA-149085> <No application version was specified for application 'NTSL_PORTAL'. The undeploy operation will be performed against the currently active version 'V2.0'.>+
INFO: Found persistence provider "org.eclipse.persistence.jpa.PersistenceProvider". OpenJPA will not be used.
INFO: Found persistence provider "org.eclipse.persistence.jpa.PersistenceProvider". OpenJPA will not be used.
+<BPELConnectionUtil> <getWorklistConnections> The Worklist service does not have a ConnectionName configuration entry in adf-config.xml that maps to a BPELConnection in connections.xml, therefore the Worklist service was not configured for this application.+
+<NotificationSenderFactory> <getSender> Notification sender is not configured+
+<ADFContext> <getCurrent> Automatically initializing a DefaultContext for getCurrent.+
Caller should ensure that a DefaultContext is proper for this use.
Memory leaks and/or unexpected behaviour may occur if the automatic initialization is performed improperly.
This message may be avoided by performing initADFContext before using getCurrent().
To see the stack trace for thread that is initializing this, set the logging level of oracle.adf.share.ADFContext to FINEST
+[01:04:48 PM] Application Undeployed Successfully.+
+[01:04:48 PM] Elapsed time for deployment: 6 seconds+
+[01:04:48 PM] ---- Deployment finished. ----+
+[Application NTSL_PORTAL stopped and undeployed from Server Instance IntegratedWebLogicServer]+
+[Running application NTSL_PORTAL on Server Instance IntegratedWebLogicServer...]+
+[01:05:40 PM] ---- Deployment started. ----+
+[01:05:40 PM] Target platform is (Weblogic 10.3).+
+[01:05:40 PM] Retrieving existing application information+
+[01:05:40 PM] Running dependency analysis...+
+[01:05:41 PM] Deploying 3 profiles...+
+[01:05:42 PM] Wrote MAR file to C:\Documents and Settings\ahmedh\Application Data\JDeveloper\system11.1.1.5.37.60.13\o.j2ee\drs\NTSL_PORTAL\AutoGeneratedMar+
+[01:05:44 PM] Wrote Web Application Module to C:\Documents and Settings\ahmedh\Application Data\JDeveloper\system11.1.1.5.37.60.13\o.j2ee\drs\NTSL_PORTAL\NTSL_PortalWebApp.war+
+[01:05:45 PM] Info: Namespace '/oracle/adf/share/prefs' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[01:05:45 PM] Info: Namespace '/oracle/webcenter/lifecycle/importexport' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[01:05:45 PM] Info: Namespace '/oracle/webcenter/lock' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[01:05:45 PM] Info: Namespace '/oracle/webcenter/rc' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[01:05:45 PM] Info: Namespace '/persdef' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[01:05:45 PM] Info: Namespace '/shared/oracle/wcps' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[01:05:45 PM] Info: Namespace '/xliffBundles' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[01:05:45 PM] Info: Namespace '/oracle/webcenter/search/scopedMD' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[01:05:45 PM] Info: Namespace '/oracle/webcenter/framework/scope/scopedMD' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[01:05:45 PM] Info: Namespace '/oracle/webcenter/page/scopedMD' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[01:05:45 PM] Info: Namespace '/pageDefs' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[01:05:45 PM] Info: Namespace '/oracle/adf/portlet' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[01:05:45 PM] Info: Namespace '/oracle/adf/portletappscope' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[01:05:45 PM] Info: Namespace '/oracle/webcenter/doclib/scopedMD' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[01:05:45 PM] Info: Namespace '/oracle/webcenter/portalapp' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[01:05:45 PM] Info: Namespace '/oracle/webcenter/security/scopedMD' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[01:05:45 PM] Info: Namespace '/oracle/webcenter/siteresources/shared' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[01:05:45 PM] Info: Namespace '/oracle/webcenter/quicklinks/scopedMD' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[01:05:45 PM] Info: Any customizations created while running the application will be written to 'C:\Documents and Settings\ahmedh\Application Data\JDeveloper\system11.1.1.5.37.60.13\o.mds.dt\adrs\NTSL_PORTAL\AutoGeneratedMar\mds_adrs_writedir'.+
+[01:05:47 PM] Wrote Enterprise Application Module to C:\Documents and Settings\ahmedh\Application Data\JDeveloper\system11.1.1.5.37.60.13\o.j2ee\drs\NTSL_PORTAL+
+[01:05:47 PM] Deploying Application...+
+<Jul 25, 2011 1:05:52 PM GMT+05:00> <Warning> <J2EE> <BEA-160140> <Unresolved optional package references (in META-INF/MANIFEST.MF): [Extension-Name: oracle.apps.common.resource, referenced from: C:\Documents and Settings\ahmedh\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\tmp\_WL_user\oracle.webcenter.framework\owur7d]. Make sure the referenced optional package has been deployed as a library.>+
+<Jul 25, 2011 1:05:54 PM GMT+05:00> <Notice> <LoggingService> <BEA-320400> <The log file C:\Documents and Settings\ahmedh\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>+
+<Jul 25, 2011 1:05:54 PM GMT+05:00> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Documents and Settings\ahmedh\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log00003. Log messages will continue to be logged in C:\Documents and Settings\ahmedh\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log.>+
+<Jul 25, 2011 1:06:01 PM GMT+05:00> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element web-app in the deployment descriptor in C:\Documents and Settings\ahmedh\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\tmp\_WL_user\jaxrs-framework-web-lib\829i9k\WEB-INF\web.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>+
+<ADFContext> <getCurrent> Automatically initializing a DefaultContext for getCurrent.+
Caller should ensure that a DefaultContext is proper for this use.
Memory leaks and/or unexpected behaviour may occur if the automatic initialization is performed improperly.
This message may be avoided by performing initADFContext before using getCurrent().
To see the stack trace for thread that is initializing this, set the logging level of oracle.adf.share.ADFContext to FINEST
INFO: Found persistence provider "org.eclipse.persistence.jpa.PersistenceProvider". OpenJPA will not be used.
+<EclipseLinkLogger> <basicLog> 2011-07-25 13:06:36.117--ServerSession(28713857)--PersistenceUnitInfo ServiceFrameworkPUnit has transactionType RESOURCE_LOCAL and therefore jtaDataSource will be ignored+
+<ADFContext> <getCurrent> Automatically initializing a DefaultContext for getCurrent.+
Caller should ensure that a DefaultContext is proper for this use.
Memory leaks and/or unexpected behaviour may occur if the automatic initialization is performed improperly.
This message may be avoided by performing initADFContext before using getCurrent().
To see the stack trace for thread that is initializing this, set the logging level of oracle.adf.share.ADFContext to FINEST
+<LoggerHelper> <log> Cannot map nonserializable type "interface oracle.adf.mbean.share.config.runtime.resourcebundle.BundleListType" to Open MBean Type for mbean interface oracle.adf.mbean.share.config.runtime.resourcebundle.AdfResourceBundleConfigMXBean, attribute BundleList.+
+[01:06:54 PM] Application Deployed Successfully.+
+[01:06:54 PM] Elapsed time for deployment: 1 minute, 14 seconds+
+[01:06:54 PM] ---- Deployment finished. ----+
Run startup time: 73985 ms.
+[Application NTSL_PORTAL deployed to Server Instance IntegratedWebLogicServer]+
Target URL -- http://127.0.0.1:7101/mytutorial/index.html
+<JUApplicationDefImpl> <logDefaultDynamicPageMapPattern> The definition at NTSL.portal.portal.DataBindings.cpx, uses a pagemap pattern match that hides other cpx files.+
+<NavigationCatalogException> <<init>> oracle.adf.rc.exception.DefinitionNotFoundException: cannot find resource catalog using MDS reference /oracle/webcenter/portalapp/navigations/default-navigation-model.xml Root Cause=[MDS-00013: no metadata found for metadata object "/oracle/webcenter/portalapp/navigations/default-navigation-model.xml"] [Root exception is oracle.mds.core.MetadataNotFoundException: MDS-00013: no metadata found for metadata object "/oracle/webcenter/portalapp/navigations/default-navigation-model.xml"]+
+<SkinFactoryImpl> <getSkin> Cannot find a skin that matches family portal and version v1.1. We will use the skin portal.desktop.+
+<Jul 25, 2011 1:11:04 PM GMT+05:00> <Warning> <netuix> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url is /console/console.portal?_nfpb=true&_pageLabel=DeploymentTaskSummaryPage&DeploymentTaskSummaryPortlethandle=com.bea.console.handles.JMXHandle%28%22com.bea%3AName%3DADTR-0%2CType%3DDeploymentTaskRuntime%2CDeployerRuntime%3DDeployerRuntime%22%29.>+

The below message comes when you don't specify any default file for your webcenter portal application and this should not be any problem.
Target Portal.jpr is not runnable, using default target index.html.
Can you answer to my questions:
1. Did you just created a new wcp application in jdev and ran it with out doing any changes? If you have done what are the changes?
2. How did you ran your application? (right clicking a particular page or right clicking your portal project and selected "run" option?

FPM: Error while creating component Configuration

Hi,
I have installed ABAP trial version (NSP), but without loopback adapter. So, now for every WebDynpro application, I have my manually change link from "http://<mymachineName>:8000" to "http://localhost:8000".
I create an application on FPM component: FPM_OIF_COMPONENT, then an application configuration for this application.
I open this Appl. config. in se80 and press "Start configuration". Now I try to create new component configuration.
After maintaining description and transport information, I save it.
At this point, I get a dump:
"RFC Error while sending logon data"
CALL_FUNCTION_CONNECT_ERROR in CL_WDR_CFG_COMP_SHBROKER======CP.
The class: CL_WDR_CFG_COMP_SHBROKER method: INVALIDATE
has a call: call function 'WDR_INVALIDATE_CFG_PATTERN' starting new task l_cfg_task
exporting client = client pattern = l_instance_name .
where it dumps.
could you please to resolve what could be wrong? is there some system setting which I missed.
Regards,
Daman

Hi ,
This exception is raised when a connection or communications failure occurs.
This exception reports all failures and system problems on the remote machine . so look like there is some porblem with your system connection .
Could you please check in your host file , is that entry for system is maintain or not ?
Hope this help .
Regards,
Dinesh

Error while creating activities from Account application (Activity tab page

Hi Experts,
We are using CRM 5.0 with PCUI ( EP 7.0 version). We are getting below error when try to create activities from Account application in PCUI ( from activity tab page):
Error : Activity contains error.
Diagnosis
This transaction has errors.
Procedure
To correct the errors, go to the maintenance interface of the transaction.
To navigate to there, use the link to the account application
Pls suggest how to proceed with this error & helpful solutions would be rewrded generously.
Regards,
Basavaraj Patil

Hi Experts,
We are getting this error when try to create Activity from Account application in PCUI. But the same thing is working fine in at GUI level & actions profile assigned to Activity transaction is also working fine at GUI level. But in PCUIit is throwing this below error.
Diagnosis
You have attempted to create a follow-up transaction for an incorrect transction 2000764. This is not possible. You can only create follow-up transactions for error-free transactions.
System Response
The follow-up transaction is not created.
Procedure
Correct the errors in the source transaction 2000764. The error messages resulting from processing the error can be read in the application log in the source transaction.
Pls suggest solution for this.
Thanks in Advance.
Regards,
Basavaraj Patil

Error while creating change request via solman support desk message

I have configured CHARM and my change req. is working for urgent correction, I have tested the entire workflow.
however when i try to create a new change req. via support desk message --> create a change request open
I get following error
An action was terminated due to an exceptional situation.
Message no. SOCM_ACTION_LOG 090
Diagnosis
An exception has been triggered in PPF action processing.
System Response
Action processing has been terminated. The status of the transaction is still incorrect.
Procedure
You cannot execute the action until the cause of the error has been removed.
The error messages will be kept until the transaction is next checked for subsequent analysis.
Procedure for System Administration
If necessary, analyze other messages in the application log for the incorrect transaction. To analyze the termination, you can activate the breakpoints in the checkpoint group socm_exception.
Additional Information:
Exception CX_SOCM_PRECONDITION_VIOLATED occurred (program:
CL_HF_HELPER==================CP, include:
CL_HF_HELPER==================CM00A, line: 29).
pls help

Hi Yunus,
Your probably have changed the transaction type SLFN to a the customer namespace Z or Y. If this is the case you MUST also "Define Mapping Rules for Copy Control".
Goto SPRO -> SAP Solution Manager -> Scenario-Specific Settings -> Change Management -> Change Request Management -> Extended Configuration -> Change Transaction -> Change Transaction Types -> Copy Control for Change Request Management -> Define Mapping Rules for Copy Control.
Once at this point in the IMG make a copy of SLFN -> ZLFN. This will resolve your problem.
Kind regards,
Latief

Getting Error while creating device configuration (Schema Node ref problem)

Hi,
In MDM 2.0.1, I created the following(in order) :
1.UOM
2.Measuring Component Type
3.Device Configuration Type
4.Service Provider
5.Device Type
6.Device
But when trying to Configure the created Device, its showing some error as...
Schema node isNewCase (/schema/[includeDA F1-CommonToDoEntryData]/isNewCase) references non-existent service field NEW_CASE_SW.
After this has happened, i couldn't even add another configuration to some of my Existing Devices..
(But for Some existing devices, adding a new configuration doesn't throwing errors..)
Please help regarding this...

Is the Measuring Component Type u created is added in DeviceType's ConfigType list..?

Authorization Missing error while creating web dynpro Application

Hi experts,
I am new to web dynpro and trying to learn it by myself. I am getting an authorization error while creating a web dynpro application. I am not getting any errors while activating Views or Windows. But when I created a web dynpro application and tried to save it, it thew me a warning saying that " You are not authorized to use function Netzwerkadministration " . Still I could be able to create the application, but not able to run it.
What settings should be done to have this authorizations ?
Any suggestion would be helpful.
Thanks,
RVSS

Hi,
Get your BASIS person to give you authorization to Tcode SICF and also authorization to create and activate services in Tcode SICF.
You need authorization to object S_ICF_ADM apart from authorization to tcode SICF
Regards,
Ajay
Edited by: ajay matam on Sep 9, 2009 12:04 PM

Error while creating database in classic appln

Hi All,
I am getting this error while creating database in classic application.
com.hyperion.planning.olap.EssbaseException: Failed to create database, error code [%s] (1013221).
Can anyone please let me know why I am getting it?
Thanks in advance

Can you check for a more specific error code in the Application log? There can be various reasons for this:
1. For data storage and binary installation, Essbase supports the use of any disk array device mounted with a local file system interface (for example, NTFS, HPFS, JFS, VxFS, and UFS). A disk array mounted using NFS or CIFS is not supported.Use any disk array device mounted with a local file system interface (for example, NTFS, HPFS, JFS, VxFS, and UFS).
2. Error occurs when deploy Planning application with double byte enabled. When the plan name is changed to English, deploy will be successful. This issue can be fixed by setting Correct Essbase ESSLANG system value.
3. The Essbase User that creates the application and DB folders has default ACL rw-rw-rw which does not allow the essbase app to create files inside the folder.
HTH-
Jasmine.

Error while creating BOM

Hi
iam facing error while creating, changing and display BOM.
Error: Status MHCO of the user interface SAPLCSDI missing.
rgads

Dear,
MHCO - BOM item screen GUI status..Are you using any Alternative item?
Have you applied any new patch in the system?
Contact ABAPer, can give more details
In SAP service place serach for this interface program,,,you will get many notes on this.

Error while creating Application Configuration as given in WDP-tutorial5

Hi All,
I'm a beginner to webdynpro ABAP. I tried the example given in
'Web Dynpro for ABAP: Tutorial 5 u2013 Component and Application Configuration', but got stuck when tried creating an Appication Configuration.
ie. in Web dynpro application create/change configuration after giving the configuration name I clicked on create in the browser, but it resulted in a error message saying
'Error sending data, session terminated ' of termaination type TH_RES_FREE.
Please suggest me a solution to resolve this.
Regards,
Manoj Kumar P

That sounds like lower level system problems - like like of available memory. That doesn't sound like a normal application error or even a short dump. You should have your Basis administrator look at the system logs for that time period. Does this happen every time you try this particular action? Have you checked ST22 to see if there are any other details on the error?

Getting the following error while creating a new configuration

Hi team,
I am trying to create configuration of my web dynpro application. When
I right click on my application and choose create/change configuration,
browser started. Now when I give a name ( e.g zabc) to it and choose the
function create, the following error occurs... Can you please give me
suggestion to overcome it
Error when processing your request
What has happened?
The URL https://gsdcb261.in.ibm.com:8443/sap/bc/webdynpro/sap/zims_issue/ was not called due to an error.
Note
The following error text was processed in the system SD4 : Screen output without connection to user.
The error occurred on the application server gsdcb261_SD4_01 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
SYSTEM-EXIT of program SAPLSKEY
Function: TADIR_OBJECT_CHECK of program SAPLSKEY
Function: CHECK_ACCESS_KEYS of program SAPLSKEY
Method: CHECK_TROBJ_BEFORE_EDIT of program CL_WD_CONFIGURATION_MODEL=====CP
Method: FILL_APPL_CONFIG_CONTEXT of program CL_WD_CONFIGURATION_MODEL=====CP
Method: UPDATE_APPLICATION_TREE of program /1BCWDY/0A4VPNTYZEA2W6Q9CMDX==CP
Method: IF_COMPONENTCONTROLLER~UPDATE_APPLICATION_TREE of program /1BCWDY/0A4VPNTYZEA2W6Q9CMDX==CP
Method: ONACTIONACTION of program /1BCWDY/0A4VPNTYZEA2W6Q9CMDX==CP
Method: ONACTIONACTION of program /1BCWDY/0A4VPNTYZEA2W6Q9CMDX==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/0A4VPNTYZEA2W6Q9CMDX==CP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system SD4 in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server gsdcb261_SD4_01 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server gsdcb261_SD4_01 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-https -c: 100 -u: AGAURAV -l: E -s: SD4 -i: gsdcb261_SD4_01 -w: 0 -d: 20070426 -t: 200845 -v: RABAX_STATE -e: DYNPRO_SEND_IN_BACKGROUND
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team

Hello Thomas,
I am sorry but I haven't check this forum in the last weeks because of lack of time. Thanks for your hint regarding a potential solution. Taking a look a the note I have some problem in "using" it.
This note contains a number of potential solutions regarding our problem.
Solution 1.) one could use the modification as described. Surprising to read that SAP is saying: do a modification to solve the problem. => this is only possible "manually" I am not sure If I will follow this approach
Solution 2.) Change the URL: This solution scenario I do not understand. The solution path is "very" short and not very instructive. This is the story:
You can do this by adding "_OLD" to the name of the application of the URL created for the configuration: Use "CONFIGURE_APPLICATION_OLD" instead of "CONFIGURE_APPLICATION"
and "CONFIGURE_COMPONENT_OLD" instead of "CONFIGURE_COMPONENT". If you want to use this function as your standard, you have to change the original application. To do this, set the parameter "OLD_TR" to "X".
This solution path is "to short". I do not get the "message" what to do.
Furthermore: Does that mean you have to use this peculiar solution any time durnig software development of webdynpro components using configurations? In my opinion yes. This is therefore only a "workaround solution" and nothing else.
And there can I find this parameter "old_tr" they are talking about?
Sap note 1060287 is the "same" kind (Symptom of this note:
If you use the configuration editor, there may be errors during transport handling or
DYNPRO_SEND_IN_BACKGROUND crashes.).
Here they are saying:
"Solution
A final solution will be provided for Release 7.0 BASIS Support Package 13."
So in SP13 there seems to be a solution (I haven't found up to now the corresponding note). But does that now mean I must implement the complete support package?
So I am sorry: No progress on my side up to now. May be you have had some success?
With best regards
Christoph

Error while creating hfm application

Hi guys,
I am getting the following error while creating a new application in HFM 9.3.1
"An unknown error has occurred in the HsxServer object"
Can anybody help in resolving such error
Thanks

Hi
Thanks for the prompt reply.
I am trying to create app from workspace as well as from desktop client but the error remains the same
Yes, this is the first app on this installation
I have killed the process hsxserver.exe from the task manager, even then i am getting the same error.
I believe the problem could be something else
awating reply

Error while creating application

Hi,
I am getting the following error while creating the application.
"IHspAppAssistantACM_SaveAppAssistant() Error
Unable to Create application FirstApp.
Error Number: 2147024891"
No other application is existing with this name.
I checked the HspEventLog... the following listed in it:
Information*16*ns36225*01/09/08 11:53:17*CHspDataSourceImp.cpp*Line 378*Entering CreateApplication: FirstApp*
Information*16*ns36225*01/09/08 11:53:19*CHspDSSQL.cpp*Line 3255*Could not retrieve planning version*
Information*16*ns36225*01/09/08 11:53:19*CHspDSSQL.cpp*Line 3326*Could not retrieve product release*
Information*16*ns36225*01/09/08 11:53:19*CHspDSSQL.cpp*Line 3397*Could not retrieve product CSS Version*
Error*16*ns36225*01/09/08 11:53:19*CHspDSSQL.cpp*Line 217*Version & Release not found*
Information*16*ns36225*01/09/08 11:53:19*CHspDataSourceImp.cpp*Line 394*CreateApplication: Deleting old schema*
Information*16*ns36225*01/09/08 11:53:20*CHspDataSourceImp.cpp*Line 408*CreateApplication: Recreating security tables*
Information*16*ns36225*01/09/08 11:53:20*CHspDataSourceImp.cpp*Line 437*CreateApplication: Creating Essbase application*
Information*16*ns36225*01/09/08 11:53:31*CHspDataSourceImp.cpp*Line 495*CreateApplication: Creating new schema*
Information*16*ns36225*01/09/08 11:53:32*CHspDataSourceImp.cpp*Line 574*CreateApplication: Initializing schema*
Information*16*ns36225*01/09/08 11:53:32*CHspDataSourceImp.cpp*Line 642*CreateApplication: Creating plantypes*
Information*16*ns36225*01/09/08 11:53:32*CHspDataSourceImp.cpp*Line 754*CreateApplication: Creating application owner user*
I am using the following credentilas:
Essbase Server login : admin
SQl Server login: admin
Windows NT login: ns36225
We are using Planning 9.2 version and Planning Desktop for creating the applications.
please help me.
Thanks in advance.
null

Hi,
I had set up CSS Properties file and as follows:
<?xml version="1.0" encoding="UTF-8" ?>
- 
- <css>
- <hub location="http://hic-pcs27303:58080">
<dirPort>58089</dirPort>
</hub>
- <spi>
- <provider>
<native name="Native Directory" />
</provider>
</spi>
- <searchOrder>
<el>Native Directory</el>
</searchOrder>
- <token>
<timeout>480</timeout>
</token>
- <logger>
<priority>WARN</priority>
</logger>
</css>
I got the problem. it is with DCOM account. I am adding a user in my LAN network, after clicking apply it taking the user in System account not in the domain account. e.g: I logged into my Sys(no: hst-pcs5424) with ABC domain, added a user ns36225 in this domain. During application setup it is looking for DCOM account in hst-pcs5424 account not in my ABC domain. So i need to add a user to the system account that should work without the LAN netwrok. But now my user account won't work with LAN.

Error while creating new application in windows client

Hai Experts,
I am experiencing an error while creating a new application in HFM
Error Reference number: {F6BA937D-6CBC-486C-800C-57DAB415C5EE}
NUM:0X80040225;TYPE:1;DTIME:6/12/2012 10:52:48 AB;SVR; STATION31; FILE: CHSXSERVERIMP1: CPP; LINE:3537;VER:11.1.1.3.0.2413;
Please reply me it's urgent.

Hai,
After doing snapshot my application was created and even in fdm also i found error while creating application(hint:cache not found) but now everything is fine don't know what exactly the error may be but now i am facing 404 error while doing Assign Access control in shared services console what may be the reason did anyone experienced this error if so please provide me the solution.
Edited by: 940022 on Jun 15, 2012 3:50 AM
Edited by: 940022 on Jun 15, 2012 3:51 AM

Error while create/change configuration an application

Similar Messages

Maybe you are looking for