ERROR WHILE CREATING A DATABASE LINK TO INFORMIX

I'm creating a database link with the Oracle Dataware Builder, and i get the following error:
Probando...
Fallo.
SQL Exception
Error del repositorio: Excepción SQL.
Nombre de la Clase: CacheMediator.
Nombre del Método: getDDEntryFromDB.
Mensaje de Error del Repositorio: ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Generic Connectivity Using ODBC][Informix][Informix ODBC Driver][Informix]Incorrect password or user [email protected] is not known on the database server. (SQL State: 28000; SQL Code: -951)
ORA-02063: preceding 2 lines from PRUEBA_SEH
As you can see i'm using heterogeneus services to connect to a informix database. ALTIADM is a valid user for that database, i don't send my ip address 192.168.0.62, but the error says "[email protected] is not known in the database server". how can i solve it?????

Right places to ask this question are
Heterogeneous Connectivity
Warehouse Builder

Similar Messages

ERROR WHILE CREATING A DATABASE LINK USING HETEROGENEOUS SERVICES

I'm creating a database link with the Oracle Dataware Builder, and i get the following error:
Probando...
Fallo.
SQL Exception
Error del repositorio: Excepción SQL.
Nombre de la Clase: CacheMediator.
Nombre del Método: getDDEntryFromDB.
Mensaje de Error del Repositorio: ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Generic Connectivity Using ODBC][Informix][Informix ODBC Driver][Informix]Incorrect password or user [email protected] is not known on the database server. (SQL State: 28000; SQL Code: -951)
ORA-02063: preceding 2 lines from PRUEBA_SEH
As you can see i'm using heterogeneus services to connect to a informix database. ALTIADM is a valid user for that database, i don't send my ip address 192.168.0.62, but the error says "[email protected] is not known in the database server". how can i solve it?????

Right places to ask this question are
Heterogeneous Connectivity
Warehouse Builder

APP-RG-09518: An error occurred while creating a database link

Hi All,
While creating a database link in Oracle EBS from one instance to another instance for transferring FSG reports
Go to Any GL Setup responsibility...Setup>System>Database links > Create new database link
Prior to the above...below steps should be done on the server.
1.grant create database link to <apps.user>; (on db server)
2.source tns entry should be in destination tns file and destination tns entry in source tns file. (check tnsping after entry)
3.*make sure destination tns entry of 8.0.6 oracle home should be in source tns file* (Because we are creating db link for the application)
4.Run the Program FSG Report.
Regards,
Harish Muramshetty.

Hi,
I have solved the issue as below:
This error was started when I install a software which I have made myself and it uses sql server compact edition 3.5.
I saw when I manually replaced the sql related files from "C:\Program Files (x86)\Microsoft SQL Server Compact Edition\v3.5" with the files which my software setup had "version 3.5.5386.0" then the error started. And if copy back the latest version 3.5.8080.0
then it disappear. So use latest sql files in your software too.
My software was replacing the the latest files with older version.
Muhammad Arshad Awan

Gating error while creating standby database in oracle 11g

Dear Gurus
I am getting following error while creating standby database. My database version is oracle 11g 11.2.0.1 in Redhat 5.2
RMAN> duplicate target database for standby from active database;
Starting Duplicate Db at 10-MAY-12
using channel ORA_AUX_DISK_1
contents of Memory Script:
backup as copy reuse
targetfile '/oracle/product/11.2.0/dbhome_1/dbs/orapworcl' auxiliary format
'/oracle/product/11.2.0/dbhome_1/dbs/orapwstdb' ;
executing Memory Script
Starting backup at 10-MAY-12
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 05/10/2012 15:44:18
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 05/10/2012 15:44:18
ORA-17629: Cannot connect to the remote database server
ORA-17627: ORA-12528: TNS:listener: all appropriate instances are blocking new connections
ORA-17629: Cannot connect to the remote database server
RMAN>
Regards
Rabi

Hello;
Generally for the connection to work you need to add something like this to the listener.ora file :
(SID_DESC =
    (global_dbname = STANDBY.hostname)
    (ORACLE_HOME = /u01/app/oracle/product/11.2.0.2)
    (sid_name = STANDBY)
)You should stop and start the listener on the Standby after adding this. Also your tnsnames.ora must be correct on both the primary and the Standby.
Also you need an INIT for the Standby side :
STANDBY.__db_cache_size=343932928
STANDBY.__java_pool_size=4194304
STANDBY.__large_pool_size=4194304
STANDBY.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
STANDBY.__pga_aggregate_target=281018368
STANDBY.__sga_target=834666496
STANDBY.__shared_io_pool_size=0
STANDBY.__shared_pool_size=469762048
STANDBY.__streams_pool_size=0
audit_file_dest='/u01/app/oracle/admin/PRIMARY/adump'
audit_trail='db'
compatible='11.2.0.0.0'
control_files='/u01/app/oracle/oradata/PRIMARY/control01.ctl','/u01/app/oracle/oradata/PRIMARY/control02.ctl'
db_block_size=8192
db_domain='SOME.DOMAIN.COM'
db_flashback_retention_target=2880
db_name='PRIMARY'
db_recovery_file_dest_size=2147483648
db_recovery_file_dest='/u01/app/oracle/flash_recovery_area'
diagnostic_dest='/u01/app/oracle'
dispatchers='(PROTOCOL=TCP) (SERVICE=PRIMARYXDB)'
log_archive_dest_1='LOCATION=USE_DB_RECOVERY_FILE_DEST'
open_cursors=300
pga_aggregate_target=277872640
processes=150
remote_login_passwordfile='EXCLUSIVE'
sga_target=833617920
undo_tablespace='UNDOTBS1'
log_archive_dest_1='LOCATION=USE_DB_RECOVERY_FILE_DEST VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=STANDBY'
log_archive_dest_2='SERVICE=PRIMARY LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) '
LOG_ARCHIVE_DEST_STATE_1=ENABLE
LOG_ARCHIVE_DEST_STATE_2=DEFER
LOG_ARCHIVE_MAX_PROCESSES=30
FAL_SERVER=STANDBY
STANDBY_FILE_MANAGEMENT=AUTO
DB_UNIQUE_NAME=STANDBYFinally
startup nomount
Start RMAN and issue duplicate command
$ORACLE_HOME/bin/rman target=sys/@primary auxiliary=sys/@standby
RMAN>duplicate target database for standby from active database NOFILENAMECHECK;
Keys to success
1. New Standby start NOMOUNT on new password file. ( On Oracle 11 you must copy and rename the file from Primary server )
2. Hard coded listener on new Standby server.
3. Correct tnsnames.ora files.
4. Correct duplicate command.
Please consider closing some of you old answered questions
Best Regards
mseberg
Edited by: mseberg on May 10, 2012 7:06 AM

ORA-01017 error while using a database link

Hi all,
I have a TNS entry as below
HOME=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=10.66.205.110)(PORT=1521))
(CONNECT_DATA=(SID=HOME))
I have created a database link as
create public database link link92.com using 'HOME'.
This was created successfully and an entry was made in all_db_links table.
However if i try connecting to a table in the remote database...for example
select * from emp@link92;
I am receiving an error ORA-01017(Invalid username passwd).
Would appreciate if somebody could help me out.
Thank you

It is not that the Database Link is "PUBLIC" that makes it use the current username/password.
It is that the Database Link has been created without specifying a " CONNECT TO username IDENTIFIED BY password " that makes the DBLink behave as a "current user database link" using the current username/password to connect to the remote database.
You can have a PUBLIC database link that uses a "CONNECT TO username IDENTIFIED BY password" such that all connections use the same remote username and password.
You can also have "private" (ie not PUBLIC) database link that does not specify a "CONNECT TO username IDENTIFIED BY password" which becomes a "current user [owner] database link".

Error in Creating a Database Link

I am trying to create a database link in SQL Workshop but unavailbe to create one because of the error below:
Create Database Link Failed.
ORA-00933: SQL command not properly ended
Hope you can help me with this. Thanks!

788818 wrote:
I am trying to create a database link in SQL Workshop but unavailbe to create one because of the error below:
Create Database Link Failed.
ORA-00933: SQL command not properly ended
Hope you can help me with this. Thanks!Not really, because the error message you have posted generally relates to a syntax or typing error and you haven't posted any other information. We need version of the DB and the text of what you are trying to do. But before you post that, have you tried the documentation?
Regards
Andre

DBCA ERROR WHILE CREATING A DATABASE

While creating a RAC database using DBCA, DBCA gave the folling error -
"Virtual IP address is not configured for cluster node "pdb1". Run
"/opt/app/oracle/product/10.2.0/oracle/bin/vipca" as "root" user to configure
it before performing the "create Database opration"
I couldn't find vipca in oracle home.
So, i started vipca from crs home as a root user and i got the following error
while configuring the VIP -
" CRS-0211: Resource 'ora.pdb1.vip' has already been registered"
Thanks,

A bit old but still useful info for Raw Device
http://www.fors.com/orasupp/unix/37914_1.HTM
If you are using 10gR2 consider use ASM instead.

Error While Creating Essbase Database From Hyperion Planning

Hi,
While creating the Essbase Database From the 'Manage Database' in Hyperion Planning, I am getting the following error:
com.hyperion.planning.olap.EssbaseException: Account (1060000)
It gets stuck at Adding Dimensions.
I have tried reconfiguring Planning, but no luck.
My Relation Repository is MS SQL Server 2005 and the Essbase and Shared Services are on a Linux box.
I am getting the following error in the Planning log
[12-Nov-2009 10:50:41]: Propegating external event[ FROM_ID: 68b6dbf1 Class: class com.hyperion.planning.sql.HspLock Object Type: -1 Primary Key: 50001 ]
[12-Nov-2009 10:50:41]: Processing cube: Plan1
[12-Nov-2009 10:50:41]: Setting System CFG properties for Attribute Dimensions
[12-Nov-2009 10:50:41]: Adding dimension: Account
[12-Nov-2009 10:50:41]: Closing outlines
com.hyperion.planning.olap.EssbaseException: Account (1060000)
     at com.hyperion.planning.olap.HspEssbaseOutlineAPI.EssAddMemberEx(Native Method)
     at com.hyperion.planning.olap.HspCubeRefreshTask.addDimension(Unknown Source)
     at com.hyperion.planning.olap.HspCubeRefreshTask.addDimensionsAndMembers(Unknown Source)
     at com.hyperion.planning.olap.HspCubeRefreshTask.buildOutlines(Unknown Source)
     at com.hyperion.planning.olap.HspCubeRefreshTask.run(Unknown Source)
     at com.hyperion.planning.HspJSImpl.runCubeRefresh(Unknown Source)
     at com.hyperion.planning.HyperionPlanningBean.runCubeRefresh(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:294)
     at sun.rmi.transport.Transport$1.run(Transport.java:153)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.rmi.transport.Transport.serviceCall(Transport.java:149)
     at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:466)
     at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:707)
     at java.lang.Thread.run(Thread.java:595)
Thanks for your help.
Edited by: user524093 on Nov 12, 2009 4:38 PM

Have you tried restarting the services and giving it a try?
Which version of Essbase/Planning are you on?
If your Essbase server name has more than 30 characters, please use NODENAME with short server name.

Error While creating new database connection from HFM workspace

Hi,
We have recently installed HFM and was trying to create database connection from database connection manager in HFM workspace.
I am getting below error:
"Error connecting to database connection : no HssJNIDriver950 in java.library.path" initially and later
"Error connecting to database connection : com/hyperion/ap/adm/HssConn".
Any information in this direction would helpful.
Thanks,
Bhargav
Edited by: bhargavr on Jan 24, 2011 6:55 PM

Hi bhargavr,
We came accross the same issue. Try the following solution below for this 'KNOWN ISSUE' and let me know how you get on. Drop me a note if you have any questions regarding this post.
Error: *"Error connecting to database connection: com/hyperion/ap/adm/HssConn" While Creating a Financial Management Database Connection* [ID 1102697.1]
Modified 04-JAN-2011 Type PROBLEM Status PUBLISHED
Applies to:
Hyperion BI+ - Version: 11.1.2.0.00 and later [Release: 11.1 and later ]
Microsoft Windows x64 (64-bit)
Symptoms:
You are running the Financial Reporting Web Server on a 64-bit server.
When you try to create a new Financial Management (HFM) database connection using the Database Connection Manager in Workspace you receive the following message:
“Error connecting to database connection <connection_name>: com/hyperion/ap/adm/HssConn”
You can create a database connection in Financial Reporting Studio. When you refresh a report with a Financial Management database connection, you receive one of the following messages:
“1001: Error connecting to database connection <DATABASE_CONNECTION_NAME>: com/hyperion/ap/adm/HssConn”
or
“1001: Error connecting to database connection <DATABASE_CONNECTION_NAME>: no HssJNIDriver950 in java.library.path”
Cause:
The issue is documented in unpublished bug 9537050, and in Known Issues in the 11.1.2 Reporting and Analysis Readme. Cross-reference unpublished bug 9707353.
Solution:
In the Windows registry, take the following steps:
Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\HyperionSolutions\FinancialReporting0\HyS9FRReports.
For each of the following entries, prefix the contents with text in the blue box: Env2, JVMOption13, and JVMOption17 (note that the JVMOption numbers might be slightly different in your environment).
C:\Oracle\Middleware\EPMSystem11R1\common\ADM\11.1.2.0\bin-64
If your EPM_ORACLE_HOME is not located at C:\Oracle\Middleware\EPMSystem11R1, replace that location with your location.
Restart the server.
G'Luck,
-David

Error while creating standby database for ebs prod database

Hi,
We are getting error while trying to create a standby database for EBS database by using RMAN DUPLICATE commands,
Steps followed:
1.) Backup the primary database (Ebs PROD db). This was done on 12-Mar-2012
***RMAN backups are scheduled to run @10:00 pm every night. Flash Recovery Area has been configured and backup is taken at this location
everyday.
2.) Tar the backupset, autobackup, archivelogs etc in FRA .... and copy this to the target server (STANDBY).
*** Copy(oracle rdbms binaries and FRA) completed @12:00AM on 14-Mar-2012
3.) Tried to create standby database by using RMAN duplicate on 14-Mar-2012
RMAN> rman sys/sys@PROD auxiliary /
RMAN> duplicate target database for standby dorecover nofilenamecheck;
After, some time the RMAN DUPLICATE process errors out with,
ORA-19563: header validation failed for file
We are not sure about the cause of this error. While searching in Metalink, we got several notes (ex, 352074.1) but all the causes stated for this error
are not applicable in our case. We double checked our instance to confirm this.
We have also found that in PROD database there are 65 datafiles and after the RMAN DUPLICATE errors out in the targer server (STANDBY) the RMAN managed to restore 51 datafiles before erroring out.
# Please note PROD database was also backed up on 13-Mar-2012. We have a suspicion that backup on 13-Mar may be a possible cause for this error but we are
not sure.
Need suggestions if there can be any other possible causes???
We are in a fix and it would be appreciable if we get some quick suggestions..
Regards,
Rupdipt
Edited by: orarup on Mar 14, 2012 12:29 AM

When opening the file to be placed in a copy or backup set, to be inspected, or used as the target for an incremental restore, its header was not recognized as a valid file header for a file of the indicated type (data file, archived log, or control file) belonging to the current database.
Kindly Ensure that the correct files are being specified for the copy or backup operation.
Regs,
Bhavi Savla.

Error while creating a database

Hi.
I am using the Oracle Database Configuration Assistant to create a database.
It gives me an error Listener start failed, maybe already running.
Later gives a message Listener configuration complete.
The listener if it was running also it automatically goes down after this.
I can see the database but not able to enter it or use it.
The following is an extract from my Listener.log file.
TNSLSNR for 32-bit Windows: Version 9.2.0.1.0 - Production on 29-JAN-2010 19:51:12
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
System parameter file is D:\oracle\NTAMLT99\network\admin\listener.ora
Log messages written to D:\oracle\NTAMLT99\network\log\listener.log
Trace information written to D:\oracle\NTAMLT99\network\trace\listener.trc
Trace level is currently 0
Started with pid=2140
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC0ipc)))
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=NTAMLT99)(PORT=1521)))
TNS-12546: TNS:permission denied
TNS-12560: TNS:protocol adapter error
TNS-00516: Permission denied
*32-bit Windows Error: 13: Permission denied*
No longer listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC0ipc)))
I am new to Oracle and not sure on what to interpret from this.
Please help me to resolve this.
Regards,
AP

Hi, The user has insufficient privileges to perform the requested operation.So acquire necessary privileges and try again.
Hope it works
Shafiulla Syed

"TNS: Protocol adapter error" while creating a database

Hi All,
I´m new to Oracle and trying to create a database.
We use Oracle 8.1.7
I´m using the Database Configuration Assistant. The problem is when creating the database I get the error:
TNS-12560 TNS: Protocol adapter error
Any help will be really appreciated.
Thanks in advance,
Carlos.

Do you have ORACLE_HOME and/or ORACLE_SID defined in the environment which are different than the settings for the new database that you are trying to create?

Getting error while creating standby database

I am creating standby database in oracle 10.2 on windows (same machine)and getting following error.Could any one please suggest me on this.
on primary database alert log file
================================================
Error 1031 received logging on to the standby
Fri Jul 17 18:09:23 2009
Errors in file c:\oracle\product\10.2.0\admin\orcl\bdump\orcl_arc0_4512.trc:
ORA-01031: insufficient privileges
PING[ARC0]: Heartbeat failed to connect to standby 'IDR'. Error is 1031.
================================================
my LISTENER file is as below
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = Orcl)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(SID_NAME = Orcl)
(SID_DESC =
(GLOBAL_DBNAME = idr)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(SID_NAME = idr)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = Gaurav-PC)(PORT = 1521))
and tns file is as below
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = Gaurav-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
IDR =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = Gaurav-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = IDR)
)

recreate the instance at standby database without password file
oradim -new -IDR standby -startmode manual recreate password file at primary database , copy the same password file from primary database to standby database,also make sure primary database started with REMOTE_LOGIN_PASSWORDFILE=EXCLUSIVE parameter.
Check also the primary database is able to tnsping to standby database.
Khurram

Paraller Query Server Error while creating the database using DBCA on UNIX

Hi All,
I am try to create the database on UNIX PLATFORM database 11g R1.
At the end of database creation using DBCA i got the errors:
ORA-12801:error signaled in parallel query server P077
ORA-00018: maximun number of sessions exceeded
ORA-06512:at"SYS.UTL_RECOMP",line 760
ORA-06512:at"SYS.UTL_RECOMP",line 773
ORA-06512:at line 1
Please suggest what can i do to remove this issue.
Regards
Girish Sharma

user12104101 wrote:
Hi All,
I am try to create the database on UNIX PLATFORM database 11g R1.
At the end of database creation using DBCA i got the errors:
ORA-12801:error signaled in parallel query server P077
ORA-00018: maximun number of sessions exceeded
ORA-06512:at"SYS.UTL_RECOMP",line 760
ORA-06512:at"SYS.UTL_RECOMP",line 773
ORA-06512:at line 1
Please suggest what can i do to remove this issue.
Regards
Girish SharmaIncrease value of SESSIONS(also processes) parameter as
sqlplus "/as sysdba"
show parameter sessions
alter system set sessions =<new big value> scope=spfile;
shutdown immediate;
startup;

Error while creating Auxiliary database through RMAN on the same host.

I got the following error while cloning a stand by database through RMAN.
I got the following error while cloning a stand by database through RMAN.
[oracle@localhost admin]$ rman auxiliary sys/clonedb@clonedb
Recovery Manager: Release 11.1.0.6.0 - Production on Mon Sep 19 10:51:48 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04006: error from auxiliary database: ORA-12154: TNS:could not resolve the connect identifier specified
My LISTENER looks like this:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(ORACLE_HOME = /u01/app/oracle/product/11.1.0/db_1)
(SID_NAME = ora11g)
(SID_DESC =
(ORACLE_HOME = /u01/app/oracle/product/11.1.0/db_1)
(SID_NAME = CLONEDB)
TNS Names:
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORCL)
CLONEDB=
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = CLONEDB)
And SQLNet.ora
NAMES.DIRECTORY_PATH= (TNSNAMES,HOSTNAME, EZCONNECT)
Any help would be highly appreciated.
Thanks,
-Revku.

Hello,
I think there is something wrong with the ")" in the listener.ora : the second SID_DESC is not part of the SID_LIST.
Instead of
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(ORACLE_HOME = /u01/app/oracle/product/11.1.0/db_1)
(SID_NAME = ora11g)
(SID_DESC =
(ORACLE_HOME = /u01/app/oracle/product/11.1.0/db_1)
(SID_NAME = CLONEDB)
)It should be :
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(ORACLE_HOME = /u01/app/oracle/product/11.1.0/db_1)
(SID_NAME = ora11g)
(SID_DESC =
(ORACLE_HOME = /u01/app/oracle/product/11.1.0/db_1)
(SID_NAME = CLONEDB)
)Hope it will help.
Regards,
Sylvie

ERROR WHILE CREATING A DATABASE LINK TO INFORMIX

Similar Messages

Maybe you are looking for