Error while creating a quote/quick quote

Dear Experts
While creating a quote/quick quote, the system is showing an error, and save also fails. The error is: "Your current credentials do not grant access to this product"
Kindly help to reolve this.
I am using the system to configure certain demo scenarios.
Regards
Malay

Thanks Ankur Godre , Pragya Pande, Surjeet Bhati
Thanks a lot for your suggestions. I suppose the problem has to do with the Industry solutions incorporated in scoping.
I selected Insurance, and excluded retail (the initial selection).
Now I have reverted the changes, and everything is working fine.
Though I will keep on working to resolve this issue and once successful, will share at this forum.
Thank you everyone.
Regards
Malay Dwivedi

Similar Messages

Error while creating absence Quotas - Error no 83

Hi Friends,
Would appreciate help on this .
While creating time quota-
am geting this error :
<b>Error while creating absence Quotas.
Error no - 83</b>
Reagards,
Srikanta

Hi
Don't know if your question has been resolved, but check the leave cycle date types on IT0041 and IT0001 and IT0007 should all be aligned.
Hope this helps.

Error while creating absence record in PA30 using 2001 infotype

Hi all,
iam getting an error while creating absence record for infotype 2001for LOP(unpaid)
error : No quota available for att./abs. 6000 for pers. no. 61000052 between 31.12.2009 and 31.12.2009
i have did
Create a absence type LOP
Determine Entry Screens and Time Constraint Classes
Define Counting Rules
Assign Counting Rules to Absence Types
Payroll: India>>Absences>Describe Absence Valuation Rules 01 Unpaid Leave
Group Absences for Absence Valuation>>Absence valuation rule>>F4 country grouping 40>> assign 01Unpaid Leave
please solve this

Actually I don't know how your system is configured.
However, the error you're receiving seems you have assigned the absence type to a quota type.
Please go to your counting rule and check whether Deduction rule - absence quotas - within entitlement field is filled.
If yes, get the deduction rule value and go to
SPRO Time man- Time data rec - Absences - Absence Cat - Abs counting - rules for counting (new) - deduction rules for abs quotas and check the quota type in here.
If there is a quota assignment in place, before creating an IT2001 you need to create a IT2006 for that specific time period.
Or, you need to delete the quota assignment via two config steps mentioned above.
Regards,
Dilek

***Error while creating tne applications in Essbase***

Hi all,
We are getting the following error while creating the applications in Essbase console ( we are using Oracle EPM 11.1.1.2 on vmware 2003 server).
Error: 1056603 Unable to spawn process for application. Please ensure that adequate memory is available.
Kindly have insight on this error and advise on the same.
Expecting assistance very soon as it is of urgent requirement we are in amidst of processes
Thank you.

Hi Mink,
Thanks for ur quick reply.
I am working with vmware,I have allocated 1.5GB of RAM and it has 20GB of disk space is available.
Is there anything else that I need to check?Its not becoz of Memory I assume.
Thank you.

Error while creating a new connection in ODSM for OVD

Hi all,
I am getting the following error while creating a new connection in ODSM for OVD.
Error log:
[2012-07-10T14:50:30.005+05:30] [wls_ods1] [ERROR] [] [oracle.adfinternal.view.faces.config.rich.RegistrationConfigurator] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JXkC9dU3FClqwsJb6G1FyhO000003D,0] [APP: odsm#11.1.1.2.0] Server Exception during PPR, #7[[
javax.servlet.ServletException: Could not initialize class com.octetstring.vde.admin.services.client.VDEAdminServiceSoapBindingStub
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:277)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by:
=======
java.lang.NoClassDefFoundError: Could not initialize class
com.octetstring.vde.admin.services.client.VDEAdminServiceSoapBindingStub
at com.octetstring.vde.admin.services.client.ServerMgrServiceLocator.getVDEAdminService(ServerMgrServiceLocator.java:58)
at oracle.ldap.odsm.model.ovd.APServerProxy.connect(APServerProxy.java:248)
at oracle.ldap.odsm.model.ovd.APServerProxy.authenticateAs(APServerProxy.java:684)
at oracle.ldap.odsm.model.ovd.APServerProxy.authenticate(APServerProxy.java:286)
at oracle.ldap.odsm.model.ovd.APServerProxy.init(APServerProxy.java:216)
at oracle.ldap.odsm.model.ovd.APServerProxy.<init>(APServerProxy.java:198)
at oracle.ldap.odsm.model.ovd.OVDRoot.connectOVD(OVDRoot.java:185)
at oracle.ldap.odsm.ui.common.Connection.connect(Connection.java:120)
at oracle.ldap.odsm.ui.common.Visit.createConnection(Visit.java:663)
at oracle.ldap.odsm.ui.common.Login.saveChanges(Login.java:215)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sun.el.parser.AstValue.invoke(Unknown Source)
at com.sun.el.MethodExpressionImpl.invoke(Unknown Source)
at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53)
at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1245)
at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.broadcastEvents(LifecycleImpl.java:812)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:292)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
... 28 more
How to resolve this issue.Pls suggest me.
Regards,
-Deena.

Hi Deena,
This error:
"[2012-07-10T14:50:30.005+05:30] [wls_ods1] [ERROR] [] [oracle.adfinternal.view.faces.config.rich.RegistrationConfigurator] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JXkC9dU3FClqwsJb6G1FyhO000003D,0] [APP: odsm#11.1.1.2.0] Server Exception during PPR, #7[[
javax.servlet.ServletException: Could not initialize class com.octetstring.vde.admin.services.client.VDEAdminServiceSoapBindingStub"
is known issue
Go to metalink, article: Unable To Connect To OVD 11g Webinterface Using ODSM. [ID 1282757.1]
You need to apply that patch.
I hope this helps,
Thiago Leoncio.

Error while creating a recipe in plm..

Hi every one,
System throughing below error while creating a recipe.
"Entries in status management Customizing are incorrect"
kindly suggest.
have a good day..
regards,
kirran

Hi Kirran,
Please see if you have defined a status scheme and assigned it to the recipe type. Before defining a status scheme, you must complete the one time IMG activity 'Collect Object Types and Assigned Attributes' under Recipe Development > Status Management. Then in the next node you define individual statuses and a scheme with transitions. For each status, you must define 'field value' for the field RCP_USAGE which is nothing but a value from Recipe Purposes customizing.
Hope this helps.
Regards,
Rajeev

Error while creating a PO

Hi all,
I have got an error while creating a PO with an Internal Order. I am trying to post this PO against an Internal Order. The error message says that:
User status BUDG is active (ORD 10034). When I click the perform assistant, it says that according to this status, transaction 'Material purchase order' is not allowed.
Can somebody plss help me in this regards, I will assign points.
Thank you,
Sony

What you enter in the Cost element master data is only for defaulting the cost center or order when you use that GL account.
When you see a message transction requires an account assignment, you can enter the relevant cost center for which the cost is incurred.
For your information, If an order has been marked as statistical, you can find it in KO02 change order > Control data. there may be check box saying statistical. If it is not available, then, you can't make it statistical until, you make that field available for change for the order type. Usually orders of a particular type can be made as statistical, by providing a model order to the order type. In the model order you specify that it will be statistical.

Error while creating a report in BI publisher

Hi all ,
I am getting an error while creating a new report in BI publisher .
the error shown in console is --
java.lang.SecurityException: /
In the front end - i am getting
Operation failed: d:/OracleBI/xmlp/XMLP/Users/~administrator/annapurna/test/test.xdo
please suggest if anyone knows.

Hi,
I am newly using BI publisher . I am using 10.1.3.4.0 . I am just trying to create a report in test name. that is the first step to create a report where i am getting error. I am using default RPD paint , where all the user and Groups are defined .

Error while creating a new Domain in BEA Weblogic

I am getting the below mentioned error while creating a new Domain in BEA Weblogic
Preparing...
Extracting Domain Contents...
Creating Domain Security Information...
Saving the Domain Information...
Storing Domain Information...
String Substituting Domain Files...
Performing OS Specific Tasks...
Performing Post Domain Creation Tasks...
Domain Creation Failed!
Domain Location: C:\bea\user_projects\domains\base_domain_1
Reason: Got error in writing the node manager C:\bea\wlserver_10.0\common\nodemanager\nodemanager.domains property file!
Exception:
java.lang.Exception: Got error in writing the node manager C:\bea\wlserver_10.0\common\nodemanager\nodemanager.domains property file!
     at com.bea.plateng.domain.DomainNodeManagerHelper.registerDomainToNodeManager(DomainNodeManagerHelper.java:138)
     at com.bea.plateng.domain.DomainNodeManagerHelper.registerDomainToNodeManager(DomainNodeManagerHelper.java:170)
     at com.bea.plateng.domain.DomainGenerator.generate(DomainGenerator.java:435)
     at com.bea.plateng.wizard.domain.gui.tasks.DomainCreationGUITask$1.run(DomainCreationGUITask.java:232)

Hi,
It look two ways either you dont have permission to write any new thing to that domain.properties file or might file is got corrupted.
Please check for the permission to that file.
Regards,
Kal.

Error while creating a new folder in resource view of workbench.

hi
I am getting this error while creating a new folder from the resources view.
Please help me in this regard.
!ENTRY com.adobe.repository.ui.eclipse.forms 4 0 2009-02-19 18:18:36.340
!MESSAGE REP-001-011: Problem creating a resource folder
!STACK 0
com.adobe.repository.ui.eclipse.IDERepositoryException: com.adobe.repository.bindings.dsc.client.ResourceRepositoryClientException: ALC-REP-106-000: Caught DSCException: ALC-DSC-012-000: com.adobe.idp.dsc.registry.ServiceNotFoundException: Service: RepositoryService not found.
at com.adobe.repository.ui.eclipse.impl.dsc.IDERepositoryDSCImpl.createFolder(IDERepositoryD SCImpl.java:117)
at com.adobe.repository.ui.eclipse.core.Repository.createFolder(Repository.java:522)
at com.adobe.repository.ui.eclipse.actions.NewFolderActionDelegate.workspaceRun(NewFolderAct ionDelegate.java:91)
at com.adobe.repository.ui.eclipse.actions.WorkspaceActionDelegateRunner$1.run(WorkspaceActi onDelegateRunner.java:76)
at org.eclipse.core.internal.resources.Workspace.run(Workspace.java:1737)
at com.adobe.repository.ui.eclipse.actions.WorkspaceActionDelegateRunner.run(WorkspaceAction DelegateRunner.java:83)
at org.eclipse.ui.internal.PluginAction.runWithEvent(PluginAction.java:254)
at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionI tem.java:539)
at org.eclipse.jface.action.ActionContributionItem.access$2(ActionContributionItem.java:488)
at org.eclipse.jface.action.ActionContributionItem$5.handleEvent(ActionContributionItem.java :400)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:66)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:928)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3348)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:2968)
at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1930)
at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:1894)
at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:422)
at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
at com.adobe.lcide.rcp.Application.run(Unknown Source)
at org.eclipse.core.internal.runtime.PlatformActivator$1.run(PlatformActivator.java:78)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau ncher.java:92)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav a:68)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:400)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:177)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.eclipse.core.launcher.Main.invokeFramework(Main.java:336)
at org.eclipse.core.launcher.Main.basicRun(Main.java:280)
at org.eclipse.core.launcher.Main.run(Main.java:977)
at org.eclipse.core.launcher.Main.main(Main.java:952)
Caused by: com.adobe.repository.bindings.dsc.client.ResourceRepositoryClientException: ALC-REP-106-000: Caught DSCException: ALC-DSC-012-000: com.adobe.idp.dsc.registry.ServiceNotFoundException: Service: RepositoryService not found.
at com.adobe.repository.bindings.dsc.client.ResourceRepositoryClient.writeResource(ResourceR epositoryClient.java:920)
at com.adobe.repository.ui.eclipse.impl.dsc.IDERepositoryDSCImpl.createFolder(IDERepositoryD SCImpl.java:114)
... 31 more
Thanks
Ullas

Thanks Jasmin I did as you told and was able to create folder. But while installing the Event-Dsc and the workflow-dsc I am getting some internal error as given below.
!ENTRY com.adobe.DSC_Admin_UI 4 4 2009-02-24 15:41:34.984
!MESSAGE install of C:\Adobe\LiveCycle8.2\deploy\adobe-event-dsc.jar failed
!STACK 0
ALC-DSC-000-000: com.adobe.idp.dsc.DSCRuntimeException: Internal error.
at com.adobe.idp.dsc.registry.component.impl.ComponentRegistryImpl._install(ComponentRegistr yImpl.java:456)
at com.adobe.idp.dsc.registry.component.impl.ComponentRegistryImpl.install(ComponentRegistry Impl.java:254)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:64)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:615)
at com.adobe.idp.dsc.component.impl.DefaultPOJOInvokerImpl.invoke(DefaultPOJOInvokerImpl.jav a:118)
at com.adobe.idp.dsc.interceptor.impl.InvocationInterceptor.intercept(InvocationInterceptor. java:140)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor$1.doInTransaction(Transa ctionInterceptor.java:74)
at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionBMTAdapterBean.doBMT(EjbTran sactionBMTAdapterBean.java:197)
at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EJSLocalStatelessEjbTransactionBMTAdapter_ 3af08fdf.doBMT(Unknown Source)
at com.adobe.idp.dsc.transaction.impl.ejb.EjbTransactionProvider.execute(EjbTransactionProvi der.java:95)
at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor.intercept(TransactionInt erceptor.java:72)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.interceptor.impl.InvocationStrategyInterceptor.intercept(InvocationStra tegyInterceptor.java:55)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.interceptor.impl.InvalidStateInterceptor.intercept(InvalidStateIntercep tor.java:37)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.interceptor.impl.AuthorizationInterceptor.intercept(AuthorizationInterc eptor.java:109)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.interceptor.impl.JMXInterceptor.intercept(JMXInterceptor.java:48)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.engine.impl.ServiceEngineImpl.invoke(ServiceEngineImpl.java:115)
at com.adobe.idp.dsc.routing.Router.routeRequest(Router.java:118)
at com.adobe.idp.dsc.provider.impl.base.AbstractMessageReceiver.invoke(AbstractMessageReceiv er.java:315)
at com.adobe.idp.dsc.provider.impl.soap.axis.sdk.SoapSdkEndpoint.invokeCall(SoapSdkEndpoint. java:138)
at com.adobe.idp.dsc.provider.impl.soap.axis.sdk.SoapSdkEndpoint.invoke(SoapSdkEndpoint.java :81)
at sun.reflect.GeneratedMethodAccessor279.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:615)
at org.apache.axis.providers.java.RPCProvider.invokeMethod(RPCProvider.java:397)
at org.apache.axis.providers.java.RPCProvider.processMessage(RPCProvider.java:186)
at org.apache.axis.providers.java.JavaProvider.invoke(JavaProvider.java:323)
at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
at org.apache.axis.handlers.soap.SOAPService.invoke(SOAPService.java:454)
at org.apache.axis.server.AxisServer.invoke(AxisServer.java:281)
at org.apache.axis.transport.http.AxisServlet.doPost(AxisServlet.java:699)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at org.apache.axis.transport.http.AxisServletBase.service(AxisServletBase.java:327)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:989)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:930)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:145)
at com.adobe.idp.dsc.provider.impl.soap.axis.InvocationFilter.doFilter(InvocationFilter.java :43)
at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java: 190)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:130)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain._doFilter(WebAppFilterChain.java:87)
at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:761)
at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:673)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:498)
at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:464)
at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.jav a:90)
at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:744)
at com.ibm.ws.wswebcontainer.WebContainer.handleRequest(WebContainer.java:1433)
at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:100)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink .java:465)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink .java:394)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.ready(HttpInboundLink.java:274)
at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.sendToDiscriminators(NewConn ectionInitialReadCallback.java:214)
at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.complete(NewConnectionInitia lReadCallback.java:113)
at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionLi stener.java:152)
at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:213)
at com.ibm.io.async.AbstractAsyncFuture.fireCompletionActions(AbstractAsyncFuture.java:195)
at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:136)
at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:195)
at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:743)
at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:873)
at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1469)
Caused by: java.lang.ClassNotFoundException: com.adobe.idp.event.bootstrap.EventBootstrapImpl
at com.adobe.idp.dsc.DSContainerSearchPolicy.findClass(DSContainerSearchPolicy.java:178)
at org.ungoverned.moduleloader.ModuleClassLoader.loadClass(ModuleClassLoader.java:161)
at java.lang.ClassLoader.loadClass(ClassLoader.java:561)
at com.adobe.idp.dsc.registry.component.impl.ComponentRegistryImpl._install(ComponentRegistr yImpl.java:403)
... 70 more
As I am using the trial version so I have isnatlled all the products Workbench, Server and the application server in the same machine. My System has 2GB Ram.
Any help in this will be of great help
Regards
Ullas

Getting error while creating the variable of Schema Element type

Hi everybody,
For creating a variable of schema element type I am doing the following steps...
Select 'Variables' after right clicking on bpel process. IN this window, go to 'Create VAriable' then select 'Element' type. Now in Type Choose, I expanded the my imported schema files. And selected a element type, then click ok to create this variable... I am getting the message...
IN ORDER TO SAVE IMPORTED WSDL/SCHEMA FILES, YOU MUST HAVE A PARTNER LINK LOCATED UNDER THE CURRENT PROJECT DIRECTORY.
What is mean by that.
I have imported the schema files in project. AFter that I have imported them into the WSDL also. Now why I am getting error while creating the variable. However I can create variable directly in .BPEL file then everything is fine. And it is working also. But what is mean with the above error? Why I am not able to create variable through GUI?
Thanks.

Hi,
I have this same problem this morning, and I was going crazy, until I found this webpage on the internet:
[http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process|http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process]
The idea is that the jdeveloper is not very good working with directories with spaces on the directory name. If you move all your work to a directory without spaces, it will work smoothly. At least, it had worked for me.
Regards,
Nacho

Error while creating a Development plan template

Hi Gurus,
I am facing errors while creating Development Plan Template.
This is how it goes :
When i click on Define Forms for Talent Assessment --> a wizard pops up & i select Development Plan :
In first step, I am giving Title,Integration with SAP Learning Solution (check) & a rating scale.
Now after clicking next, I am adding 2 development areas :
1) Training
2) Mentoring,
now as soon as I'm clicking on End Configuration, It displays 2 errors & 1 warning message :
error1 : Element Appraisal Template 'XXXXX' contains errors.Cannot change status.
error2 : Value type 000000XXX of value class Q does not exists
Warning 1 : You have maintained a description that is not displayed.
In PHAP_CATALOG, when I'm trying to manually release the Criterion Group (VB) or Appraisal template (VA), it does not allow me to do it.
Kindly let me know how to proceed further.
Regards
bharti

Hi,
Even though it gives the error,the new RTF template is uploaded and it is reflected when I query the template again.
But when I run the Concurent program and see the output,the output still shows me the old template.
Regards
Jujaar

Error while creating a Solaris Resource

I got the following error while creating the following solaris resource:
Test connection failed for resource(s):
Solaris: Script failed waiting for "ASSWORD:" in response "_,)#+(:" ==> com.waveset.util.WavesetException: Script processor timed out with nothing to read and the following unprocessed text: "_,)#+(:".\n
I have the sudo permissions for the following commands:
(ALL) NOPASSWD: /usr/bin/auths, /usr/sbin/groupadd, /usr/sbin/groupdel, /usr/sbin/groupmod, /usr/bin/last, /usr/bin/listusers, /usr/bin/logins, /usr/bin/passwd, /usr/bin/profiles, /usr/bin/roles, /usr/sbin/useradd, /usr/sbin/userdel, /usr/sbin/usermod, /usr/bin/ypmatch, /usr/bin/ypcat, /usr/bin/ypasswd, /usr/bin/awk, /usr/bin/cat, /usr/bin/chmod, /usr/bin/chown, /usr/bin/cp, /usr/bin/cut, /usr/bin/diff, /usr/bin/echo, /usr/bin/grep, /usr/bin/ls, /usr/bin/mv, /usr/bin/rm, /usr/bin/sleep, /usr/bin/sort, /usr/bin/tail, /usr/bin/touch, /usr/bin/which
Please let me know what could be the problem?

This doesn't look like a Sun Directory Server issue. You may want to post this to another forum.
Regards,
Ludovic.

Error while creating a new entity row for LoginPageEO.jbo.RowCreateExceptio

hi all, i am new to OAF i have created a login page and trying to validate to a custom table which had two columns username and password, i am calling function from controller class which is in AM and from AM in turn i am calling function in VOimpl.java file where i am executing my query with whereClause, i am passing two parametere username and password to this function.
if ((uname != null) && (!("".equals(uname.trim()))))
whereClause.append(" UNAME = :");
whereClause.append(bindCount++);
parameters.addElement(uname);
clauseCount++;
if ((pass!= null) && (!("".equals(pass.trim()))))
if (clauseCount > 0)
whereClause.append(" AND ");
whereClause.append(" PASSWORD = :");
whereClause.append(bindCount++);
parameters.addElement(pass);
clauseCount++;
setWhereClause(whereClause.toString());
if (bindCount > 0)
Object[] params = new Object[bindCount];
// the copyInto() is 1.1.8 compliant which is required by ARU
parameters.copyInto(params);
setWhereClauseParams(params);
//System.out.println(getQuery());
executeQuery();
//System.out.println(getRowCount())
when i call this from login page i am getting
Error - oracle.jbo.RowCreateException: JBO-25017: Error while creating a new entity row for LoginPageEO.
Can any one help me out.

If your requirement is not to update any DB Table then don't use an EO. I would suggest the following for your requirement of validating the username and password.
- Create a VO that has the following query. Do not select any EO during the VO creation.
          SELECT 'x'
          FROM <CUSTOM TABLE>
          WHERE <USERNAME COL> = :1
              AND <PASSWORD COL> = :2
        - Have the initQuery(..) Method in your VOImpl, that takes the username and password. Binds them to the VO and executes the query.
- Have a method in your AM to take the username and password as parameters. Make a call to the above VO::initQuery(..)
- In your controller's processFormRequest(..) call this AM Method upon the submit button action.
This should work smoothly.
The following is just for triaging the error that you have. The above steps, should help you achieve your requirement by itself, the below steps would not be required.
Coming back to your issue. Any custom table should have the standard WHO Columns.
- Modify the custom table to have these who columns.
- In the EO Wizard, synchronize the EO to reflect the DB Structure.
- Make sure the EO Attributes are marked updatable.
Cause of your issue: Through you are not creating EO rows programatically, whenever a VO is based on an EO, upon execution of the VO query, EO's are automatically created, based on the number of rows returned by the VO Query. So internally its failing to created the EO Rows. On of the common reason would be that it creates the EO row, but cannot set the attributes from the VO, because the EO Attribute is readonly.
Hope this clarifies.

Error while creating a task for creating an generic task /app/dac/CustomSQ

Hi ,
I have created a sql file in DAC server /app/dac/CustomSQLs/ ,just to fire an update sql in database
In DAC task tab i have created a task with the following:
Command for incremental load :/app/dac/CustomSQLs/DBNameBeforeLoad.sql
Primary source :flatfileconnection
target source:DBCONNECTION_OLAP
Execution type:SQL FILE
Task phase:GENERAL
I created subject area and assembled ,then created a Execution plan.
When i try to execute this EP ,it shows the following error in DAC log:
ANOMALY INFO::: Error while creating a task for creating an generic task /app/dac/CustomSQLs/DBNameBeforeLoad.sql
MESSAGE:::/app/dac/CustomSQLs/DBNameBeforeLoad.sql - invalide template name!
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.TaskInitializationException
com.siebel.analytics.etl.etltask.SQLFileTask.doInit(SQLFileTask.java:69)
com.siebel.analytics.etl.etltask.GenericTaskImpl.init(GenericTaskImpl.java:194)
Does my above configuration is correct ..?

verify the following settings:
1. mapping of ECC plant and storage location and logical system number with the appropriate availability group code since this links the stock types in EWM to ECC org elements (SPRO -> EWM -> Interfaces -> ERP Integration -> Goods movement)
2. ensure the availability group configuration is correct (SPRO -> EWM -> GR Process -> Configure availability group for putaway) - check all applicable nodes in this configuration since the availability group code is assigned in the pertinent storage types

Error while creating a quote/quick quote

Similar Messages

Maybe you are looking for