Error while creating a setup package .

Hi ALL,
We are trying to create a setup package (SP20 client) for our application
after assinging the device configurations their roles and conditions to the Hierarchy Group which we created It gives the following error while creation of the setup package
Error
0050 tc.mobile.admin.bl 113101 20080222
Retrieving device id failed.
However we tried to dig up for it in help.sap.com and forum we could not resolve the error .
Please suggests the neccessary solution,Its urgent.
Thanks & Regards
Aditi Vyas

HI
This problem is already resolved in SP20. Kindly make use of the latest patch of NWMADMIN and NWMClient and the error should get resolved.
Best regards
Sivakumar

Similar Messages

Error while creating procedure and package

Hi,
I am getting an error while creating an procedure
create or replace procedure mke_test (mke_gender varchar2) is
begin
declare global temporary table mag_hotline_glob
INDIVIDUAL_ID NUMBER,
ONE_MONTH NUMBER,
THREE_MONTH NUMBER,
SIX_MONTH NUMBER,
TWELVE_MONTH NUMBER,
CHILDREN_PRES VARCHAR2(1 BYTE)
) with replace on commit preserve rows not logged;
begin
insert into mag_hotline_glob
select * from magazine_gender;
end;
end;
can anybody plz suggest

It's a total mess. You need to read the documentation first.
Create your table separately
CREATE global temporary table mag_hotline_glob(INDIVIDUAL_ID NUMBER,
                                            ONE_MONTH NUMBER,
                                            THREE_MONTH NUMBER,
                                            SIX_MONTH NUMBER,
                                            TWELVE_MONTH NUMBER,
                                            CHILDREN_PRES VARCHAR2(1 BYTE)) with replace on commit preserve rows not logged;Then use the procedure (I don't know why, this INSERT statement you can fire yourself)
create or replace procedure mke_test(mke_gender varchar2) is
begin
    insert into mag_hotline_glob
      select * from magazine_gender;
end;If you want to create the GTT inside the procedure(should be avoided) then Use EXECUTE IMMEDIATE.
By the way, where are you using the IN parameter ? It' unnecessary.

Dump Error while Creating the Info Package

Hi,
I have created Customized ODS and used Generic data sources.I have loaded full Upload to ODS. Created Info Packages for Init delta and Delta for delta loading. I have ran Full Upload and while I am trying to run Init, I am getting the error.
While I am trying to open the Info Package, I am getting Dump error message.
Dump error Message :
What happened?
    The current application program detected a situation which really
    should not occur. Therefore, a termination with a short dump was
    triggered on purpose by the key word MESSAGE (type X).
While i am trying to Create New Info Package, the systems gives the Dump on the System
Please help on this issue.
Thanks,
Siva.

Hi,
Actually, when we want to have delta loads in future, then we can just have one infopackage with init delta infopackage, so that when it runs for the first time, it pulls all the records and from next time onwards it will pull the delta records only.
But as you have done the full load with infopackage, now just create a delta infopackage, no need of init delta infopackage, this is the reason, its giving dump.
Hope it has given some insight.

Error While Creating Block on Package Procedure

Hi
When I try to create a block on a package Procedure I get the following error
ifbld60.exe has generated errors and will be closed by Windows.
You will need to restart the program.
An Error log is being created,
and forms closes.
Is it something to do with Forms problem or with Windows? Is there a patch available for this problem or its a OS bug. The client I am testing this form from is Windows 2000 Professional.
Thanks for your help
Diogo

Hi
You cannot directly insert object in Stored Procedure universe,Whatever object you are using to define your derived table,you have to include all those objects into the universe first.
From the below image you can see that i have 3 derived tables ,but whatever objects i am trying to use all those i have inserted into the universe.
Try to build like this save and export.
Let me know if you face nay error

Error while creating setuppackage

Hi All,
I am getting the following error while creating a setup package.
0010 tc.mobile.admin.bl Creation of virtual mi instance failed.
Please suggest what can be the reason for the same.
Also i have certain queries while creating a setup package for Mobile 2005 device.
1.While creating a SDA file in the Operating System tab i m not able to see any option for mobile 2005 device.It shows only WINCE/PPC 2002.Can i use this one or do we have to make some settings or something.
2.I have a MI25Tom_en.CAB file for Mobile framework.But i wanted to integrate it with the trustore and some mobileengine config parameters like syncpassword handling option = loca.What i have to do for the same.If i have a cab file with all these integratd can i use that one or server will by itself put the trustore while generating a SDA file.
3.We have to create two components one for Framework and second for install sequence amd we have to install onle creme on the PDA as i read somewhere.Do i need to put JSSE1-0-3_01.CAB somewhere while defining the mobile component or JSSE also i have to install on the PDA before running the setup.cab on PDA.
Please suggest
Thanks
Regards
Devendra Phate

Hi Devendra,
If you have downloaded Framework sda from SAP market place.
Then generally the name for the MobileComponent is MobileEngineJsp or AWT.
You can also check the name of MobileComponent in MCD.xml by opening sda->mobile-description->mcd.xml.
Search with this name and version in NWA , if search fails then there is some problem with reload or deployment process.
Check the following.
Login to the ABAP system.
Launch transaction sm59. Create new TCP/IP type RFC connection.
Enter some name for the RFC destination. Give program ID = MEMGMT_MOBILE_CONTAINER_SYNC.
Enter appropriate gateway service and host (same as you entered in Visual Admin). Test Connection.
Launch transaction sm30.
Open table MEMGMT_J2EE_DEST . Create a new entry. Enter the name of RFC destination that you created in SM59 in RFC Destination field. Enter some description.
Save the data.
Regards,
Satyendra

ORA-12571 error while creating packages from Windows clients

Hello,
We are facing the ORA-12571 error while creating / replacing packages from Windows Clients connected to a 8.1.7.2.0 db on a Solaris server.
However, there are
1. no errors in connecting and creating transactions from a Sql session
2. no errors in creating / replacing unwrapped/wrapped small (few lines) packages
3. no errors in connecting from a Unix session (remote telnet sessions inclusive).
This happens only when creating wrapped/unwrapped packages, source code of which is greater than 500 kb approx.
Can somebody help me resolve this issue. Any Help would be greatly appreciated.
Regards.
Lakshmanan, K

Update: I had unintentionally left my custom tablespace in READONLY state after an earlier experiment with transportable tablespaces. After putting the tablespace back into READ WRITE mode and creating a new template, I was successfully able to create a new db from the template.
I'm still a little curious why this procedure wouldn't work properly with a READONLY tablespace, however.
Ben

Dump error while creating or double click the info package

Hello experts,
I have actived infocube 0FIAR_C03 in BI content. Ago, The creation infopackage have been deleted in the past , today, I created a infopackage, while I update mode selected u2018initialize delta processu2019, then click save button , the system prompt u2018Deltas already loaded for request REQU_D64R47LDUSZHY9CBIB86WMLFJ init.selection; no 2. initu2019, I canoti save it for my setting. Why is this?
Then I have search cause in SDN, and I have reference OSS Note 852443 to do .
Note 852443 have mention some table: RSSELDONE、RSSDLINIT、RSSDLINITSEL、ROOSPRMSC、ROOSPRMSF.
I have to delete that request of record using se16 in these tables: RSSELDONE、RSSDLINIT、RSSDLINITSEL.
in my BI 7.0 system, ROOSPRMSC、ROOSPRMSF is no any data.
I was no found delta queue in RSA7.
Now . Dump error while creating or double click the info package, how can I change this?
Please let me know the solution.
Thanks for your help.
Best Regards
Steve

Here are some links which deals with same issue.
Re: Dump In Infopackage
Re: Getting into Short dump at the time of selecting InfoPackage to execute for
Short dump while performing init in infopackage
Re: Infopackage going into short dump
Thanks.

Error while creating a new entity row for testEO

Hi All,
I have a 1st page where I enter the employeeNumber and that particular parameter should get displayed in the 2nd page when I click on the "SubmitButton".I am moving to the 2nd page using pageContext.forwardImmediately.I am passing my parameter with this URL.But, I am getting "Error while creating a new entity row for testEO" in my code before i enter anything in " employeeNumber " field in the 1st page.
My CO code is:
/*===========================================================================+
| Copyright (c) 2001, 2005 Oracle Corporation, Redwood Shores, CA, USA |
| All rights reserved. |
+===========================================================================+
| HISTORY |
+===========================================================================*/
package xxfc.oracle.apps.test.OAProject1.webui;
import com.sun.java.util.collections.HashMap;
import oracle.apps.fnd.common.VersionInfo;
import oracle.apps.fnd.framework.OAApplicationModule;
import oracle.apps.fnd.framework.OAViewObject;
import oracle.apps.fnd.framework.webui.OAControllerImpl;
import oracle.apps.fnd.framework.webui.OAPageContext;
import oracle.apps.fnd.framework.webui.OAWebBeanConstants;
import oracle.apps.fnd.framework.webui.beans.OAWebBean;
import oracle.apps.fnd.framework.webui.beans.message.OAMessageTextInputBean;
import oracle.jbo.Row;
import xxfc.oracle.apps.test.OAProject1.server.testVOImpl;
* Controller for ...
public class testCO extends OAControllerImpl
public static final String RCS_ID="$Header$";
public static final boolean RCS_ID_RECORDED =
VersionInfo.recordClassVersion(RCS_ID, "%packagename%");
* Layout and page setup logic for a region.
* @param pageContext the current OA page context
* @param webBean the web bean corresponding to the region
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
OAApplicationModule am =(OAApplicationModule) pageContext.getApplicationModule(webBean);
testVOImpl vo1 = (testVOImpl)am.findViewObject("testVO1");
vo1.executeQuery();
Row r = vo1.first();
System.out.println("**************Error in the below Line**********************");
Row row = vo1.createRow();
vo1.insertRow(row);
row.setNewRowState(Row.STATUS_INITIALIZED);
* Procedure to handle form submissions for form elements in
* a region.
* @param pageContext the current OA page context
* @param webBean the web bean corresponding to the region
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
OAApplicationModule am =(OAApplicationModule) pageContext.getApplicationModule(webBean);
OAViewObject vo1 = (OAViewObject)am.findViewObject("testVO1");
if(!vo1.isPreparedForExecution())
vo1.executeQuery();
Row row = vo1.getCurrentRow();
am.getOADBTransaction().commit();
String strEvent = pageContext.getParameter(EVENT_PARAM);
if (strEvent.equals("update"))
String custId = pageContext.getParameter("CustID");
pageContext.putParameter("CstID",custId);
HashMap hashMap = new HashMap();
hashMap.put("CustomerId",custId);
am.getOADBTransaction().commit();
pageContext.forwardImmediately("OA.jsp?page=/xxfc/oracle/apps/test/OAProject1/webui/popupPG&CustID=custId",
null,
OAWebBeanConstants.KEEP_MENU_CONTEXT,
null,
hashMap, //hashmap
true,
OAWebBeanConstants.ADD_BREAD_CRUMB_YES
thanks,
Akshata

Hi Niranjana,
It did not work I am getting the same error.does the WHO column order in the table matters? My WHO columns are in the below order:
LAST_UPDATE_DATE
LAST_UPDATED_BY
LAST_UPDATE_LOGIN
CREATION_DATE
CREATED_BY
my error is:
oracle.jbo.RowCreateException: JBO-25017: Error while creating a new entity row for testEO.
It appears on the top of my page as a message.
Thanks,
Akshata
Edited by: Akshata on Mar 15, 2012 12:29 AM

Error while creating new projects using api

Hello,
I am having error while creating projects using standard api, PA_PROJECT_PUB.CREATE_PROJECTS. The error I am having is as follow.
Source template ID is invalid.
===
My code is as follow:
SET SERVEROUTPUT ON SIZE 1000000
SET VERIFY OFF
define no=&amg_number
DECLARE
-- Variables used to initialize the session
l_user_id NUMBER;
l_responsibility_id NUMBER;
cursor get_key_members is
select person_id, project_role_type, rownum
from pa_project_players
where project_id = 1;
-- Counter variables
a NUMBER := 0;
m NUMBER := 0;
-- Variables needed for API standard parameters
l_commit VARCHAR2(1) := 'F';
l_init_msg_list VARCHAR2(1) := 'T';
l_api_version_number NUMBER :=1.0;
l_return_status VARCHAR2(1);
l_msg_count NUMBER;
l_msg_data VARCHAR2(2000);
-- Variables used specifically in error message retrieval
l_encoded VARCHAR2(1) := 'F';
l_data VARCHAR2(2000);
l_msg_index NUMBER;
l_msg_index_out NUMBER;
-- Variables needed for Oracle Project specific parameters
-- Input variables
l_pm_product_code VARCHAR2(30);
l_project_in pa_project_pub.project_in_rec_type;
l_key_members pa_project_pub.project_role_tbl_type;
l_class_categories pa_project_pub.class_category_tbl_type;
l_tasks_in pa_project_pub.task_in_tbl_type;
-- Record variables for loading table variables above
l_key_member_rec pa_project_pub.project_role_rec_type;
l_class_category_rec pa_project_pub.class_category_rec_type;
l_task_rec pa_project_pub.task_in_rec_type;
-- Output variables
l_workflow_started VARCHAR2(100);
l_project_out pa_project_pub.project_out_rec_type;
l_tasks_out pa_project_pub.task_out_tbl_type;
-- Exception to call messag handlers if API returns an error.
API_ERROR EXCEPTION;
BEGIN
-- Initialize the session with my user id and Projects, Vision Serves (USA0
-- responsibility:
select user_id into l_user_id
from fnd_user
where user_name = 'SSHAH';
select responsibility_id into l_responsibility_id
from fnd_responsibility_tl
where responsibility_name = 'Projects Implementation Superuser';
pa_interface_utils_pub.set_global_info(
p_api_version_number => l_api_version_number,
p_responsibility_id => l_responsibility_id,
p_user_id => l_user_id,
p_msg_count => l_msg_count,
p_msg_data => l_msg_data,
p_return_status => l_return_status);
if l_return_status != 'S' then
raise API_ERROR;
end if;
-- Provide values for input variables
-- L_PM_PRODUCT_CODE: These are stored in pa_lookups and can be defined
-- by the user. In this case we select a pre-defined one.
select lookup_code into l_pm_product_code
from pa_lookups
where lookup_type = 'PM_PRODUCT_CODE'
and meaning = 'Conversion';
-- L_PROJECT_IN: We have to provide values for all required elements
-- of this record (see p 5-13, 5-14 for the definition of the record).
-- Customers will normally select this information from some external
-- source
l_project_in.pm_project_reference := 'AGL-AMG Project &no';
l_project_in.project_name := 'AGL-AMG Project &no';
l_project_in.created_from_project_id := 1;
l_project_in.carrying_out_organization_id := 2864; /*Cons. West*/
l_project_in.project_status_code := 'UNAPPROVED';
l_project_in.start_date := '01-JAN-11';
l_project_in.completion_date := '31-DEC-11';
l_project_in.description := 'Trying Hard';
l_project_in.project_relationship_code := 'Primary';
-- L_KEY_MEMBERS: To load the key member table we load individual
-- key member records and assign them to the key member table. In
-- the example below I am selecting all of the key member setup
-- from an existing project with 4 key members ('EE-Proj-01'):
for km in get_key_members loop
-- Get the next record and load into key members record:
l_key_member_rec.person_id := km.person_id;
l_key_member_rec.project_role_type := km.project_role_type;
-- Assign this record to the table (array)
l_key_members(km.rownum) := l_key_member_rec;
end loop;
-- L_CLASS_CATEGORIES: commented out below should fix the error we get
-- because the template does not have an assigment for the mandatory class
-- 'BAS Test'
l_class_category_rec.class_category := 'Product';
l_class_category_rec.class_code := 'Non-classified';
-- Assign the record to the table (array)
l_class_categories(1) := l_class_category_rec;
-- L_TASKS_IN: We will load in a single task and a subtask providing only
-- the basic fields (see pp. 5-16,5-17,5-18 for the definition of
-- the task record)
l_task_rec.pm_task_reference := '1';
l_task_rec.pa_task_number := '1';
l_task_rec.task_name := 'Construction';
l_task_rec.pm_parent_task_reference := '' ;
l_task_rec.task_description := 'Plant function';
-- Assign the top task to the table.
l_taskS_in(1) := l_task_rec;
-- Assign values for the sub task
l_task_rec.pm_task_reference := '1.1';
l_task_rec.pa_task_number := '1.1';
l_task_rec.task_name := 'Brick laying';
l_task_rec.pm_parent_task_reference := '1' ;
l_task_rec.task_description := 'Plant building';
-- Assign the subtask to the task table.
l_tasks_in(2) := l_task_rec;
-- All inputs are assigned, so call the API:
pa_project_pub.create_project
(p_api_version_number => l_api_version_number,
p_commit => l_commit,
p_init_msg_list => l_init_msg_list,
p_msg_count => l_msg_count,
p_msg_data => l_msg_data,
p_return_status => l_return_status,
p_workflow_started => l_workflow_started,
p_pm_product_code => l_pm_product_code,
p_project_in => l_project_in,
p_project_out => l_project_out,
p_key_members => l_key_members,
p_class_categories => l_class_categories,
p_tasks_in => l_tasks_in,
p_tasks_out => l_tasks_out);
-- Check the return status, if it is not success, then raise message handling
-- exception.
IF l_return_status != 'S' THEN
dbms_output.put_line('Msg_count: '||to_char(l_msg_count));
dbms_output.put_line('Error: ret status: '||l_return_status);
RAISE API_ERROR;
END IF;
-- perform manual commit since p_commit was set to False.
COMMIT;
--HANDLE EXCEPTIONS
EXCEPTION
WHEN API_ERROR THEN
FOR i IN 1..l_msg_count LOOP
pa_interface_utils_pub.get_messages(
p_msg_count => l_msg_count,
p_encoded => l_encoded,
p_msg_index => i,
p_msg_data => l_msg_data,
p_data => l_data,
p_msg_index_out => l_msg_index_out);
dbms_output.put_line('ERROR: '||to_char(l_msg_index_out)||': '||l_data);
END LOOP;
rollback;
WHEN OTHERS THEN
dbms_output.put_line('Error: '||sqlerrm);
FOR i IN 1..l_msg_count LOOP
pa_interface_utils_pub.get_messages(
p_msg_count => l_msg_count,
p_encoded => l_encoded,
p_msg_index => i,
p_msg_data => l_msg_data,
p_data => l_data,
p_msg_index_out => l_msg_index_out);
dbms_output.put_line('ERROR: '||to_char(l_msg_index_out)||': '||l_data);
END LOOP;
rollback;
END;
===
Msg_count: 1
Error: ret status: E
ERROR: 1: Project: 'AGL-AMG Project 1123'
Source template ID is invalid.
PL/SQL procedure successfully completed.

I was using a custom Application, which had a id other then 275 (which belongs to Oracle projects)

Error while creating class

Error while creating class java/util/LinkedHashMap$EntryIterator
ORA-29545: badly formed class: User has attempted to load a class (java.util
.LinkedHashMap$EntryIterator) into a restricted package. Permission can be grant
ed using dbms_java.grant_permission(<user>, LoadClassInPackage...
-----Any Suggestion?
regards,
Anjan

Anjan,
Pardon me for stating the obvious, but did you do what the error message suggested? In other words, did you grant the required permission?
Good Luck,
Avi.

Error while creating a new asset in BCC.

Getting below errors while creating a new asset(catalog/category) through BCC. I have imported the required data from CIM and install.bat from BIZUI.
/atg/dynamo/servlet/sessiontracking/GenericSessionManager/KDzDSgGcJTS9nwvGpkr9wpyz4nnGKWPYs4QFFJ87Q1BjrTSd4JTG!1759330809!1386235100684
atg.web.viewmapping.ItemMappingException: Invalid Mapping Mode: AssetManager.default
[Flex Messaging] 12/05/2013 14:50:45.486 [ERROR] [Message.Remoting] Error processing remote invocation: atg.flex.service.RemoteOperationException: java.lang.NullPointerException
Kindly suggest...

As u imported data from CIM for production and publishing(assuming u imported for both), There is no need to run BIZUI.bat mannually, CIM runs this.
Coming to ur error:
From the logs it seems that following mapMode is missing, It's OOTB and should have been loaded while Viewmapping repository data load.
<add-item item-descriptor="mapMode" id="AmMmDef">
<set-property name="name"><![CDATA[AssetManager.default]]></set-property>
</add-item>
I think there must have been problems during CIM data for publishing environment loading and because of that viemmapping is not loaded properly.
Refer to this post for initial data load : Re: ATG ENVIRONMENT SETUP ISSUE
Let us know if u didn't load publishing using CIM, there is some manual work required to load some repository.
Thanks,
Nitin.

Error while creating SR using CS_ServiceRequest_PUB.Create_ServiceRequest

Hi All,
I am getting below error while creating an SR from the backend using API 'CS_ServiceRequest_PUB'.
Error:
API Programming Error (CS_ServiceRequest_PUB.Create_ServiceRequest): An error occurred when validating the descriptive flexfield.
Additional information:Program error: Please inform your support representative that:
FLEXFIELDS SERVER-SIDE VALIDATION package reports error:
validate_desccols() exception: ORA-20005: DVLB.get_default_context() failed. SQLERRM: ORA-01403: no data found
ORA-06512: at "APPS.FND_FLEX_DESCVAL", line 931
ORA-01403: no data found
Error: ORA-06502: PL/SQL: numeric or value error: character string buffer too small
I have intialised the context as below while running the stand alone procedure in SQL Developer.
Fnd_Global.apps_initialize (user_id => 1368347,
resp_id => 21739
resp_appl_id => 514 );
We are on 11.5.10.2 and database version is 9i.
Can you please help??
TIA,
S

Hi Kesava,
I notice that in the package you used the application user_name=CHUNDUK calls the API pa_project_pub.create_project.
I wonder if you used chunduk as database user to execute the package Or you used APPS to execute the package?
The APi document states that it is a requirement to create a db username as the same name with the application username.
I have been running the problem to execute API 's delete project and try to figure what could be my problem.
TIA

Error while creating web dynpro project from DTR

Hello,
I am getting following error while creating Web Dynpro project from DTR,
org.eclipse.jdt.core.JavaModelException: File /<track name><DC><package>/.classpath is read-only.
Still project gets created but evenif I check out view , it does not allow me to edit it.
Also I have checked in and activated some changes but active copy in DTR is not reflecting those changes.
I tried Add subtree option in DTR perspective for folders in this project. Is it result of that?
Please help me in this regard.
Thank You
Beena

Hi Beena,
.classpath file should not checked in to DTR(uncheck the Read only properties). It is local file it contains class path for local system.
Generally in webdynpro project only src folder should be checked in DTR.
Regards
Suresh

Error while creating application

Hi,
I am getting the following error while creating the application.
"IHspAppAssistantACM_SaveAppAssistant() Error
Unable to Create application FirstApp.
Error Number: 2147024891"
No other application is existing with this name.
I checked the HspEventLog... the following listed in it:
Information*16*ns36225*01/09/08 11:53:17*CHspDataSourceImp.cpp*Line 378*Entering CreateApplication: FirstApp*
Information*16*ns36225*01/09/08 11:53:19*CHspDSSQL.cpp*Line 3255*Could not retrieve planning version*
Information*16*ns36225*01/09/08 11:53:19*CHspDSSQL.cpp*Line 3326*Could not retrieve product release*
Information*16*ns36225*01/09/08 11:53:19*CHspDSSQL.cpp*Line 3397*Could not retrieve product CSS Version*
Error*16*ns36225*01/09/08 11:53:19*CHspDSSQL.cpp*Line 217*Version & Release not found*
Information*16*ns36225*01/09/08 11:53:19*CHspDataSourceImp.cpp*Line 394*CreateApplication: Deleting old schema*
Information*16*ns36225*01/09/08 11:53:20*CHspDataSourceImp.cpp*Line 408*CreateApplication: Recreating security tables*
Information*16*ns36225*01/09/08 11:53:20*CHspDataSourceImp.cpp*Line 437*CreateApplication: Creating Essbase application*
Information*16*ns36225*01/09/08 11:53:31*CHspDataSourceImp.cpp*Line 495*CreateApplication: Creating new schema*
Information*16*ns36225*01/09/08 11:53:32*CHspDataSourceImp.cpp*Line 574*CreateApplication: Initializing schema*
Information*16*ns36225*01/09/08 11:53:32*CHspDataSourceImp.cpp*Line 642*CreateApplication: Creating plantypes*
Information*16*ns36225*01/09/08 11:53:32*CHspDataSourceImp.cpp*Line 754*CreateApplication: Creating application owner user*
I am using the following credentilas:
Essbase Server login : admin
SQl Server login: admin
Windows NT login: ns36225
We are using Planning 9.2 version and Planning Desktop for creating the applications.
please help me.
Thanks in advance.
null

Hi,
I had set up CSS Properties file and as follows:
<?xml version="1.0" encoding="UTF-8" ?>
- 
- <css>
- <hub location="http://hic-pcs27303:58080">
<dirPort>58089</dirPort>
</hub>
- <spi>
- <provider>
<native name="Native Directory" />
</provider>
</spi>
- <searchOrder>
<el>Native Directory</el>
</searchOrder>
- <token>
<timeout>480</timeout>
</token>
- <logger>
<priority>WARN</priority>
</logger>
</css>
I got the problem. it is with DCOM account. I am adding a user in my LAN network, after clicking apply it taking the user in System account not in the domain account. e.g: I logged into my Sys(no: hst-pcs5424) with ABC domain, added a user ns36225 in this domain. During application setup it is looking for DCOM account in hst-pcs5424 account not in my ABC domain. So i need to add a user to the system account that should work without the LAN netwrok. But now my user account won't work with LAN.

Error while creating resource group using non-globalzones.

Dear all,
Hi techs please guide me how to create failover resource group in nongloablzones.
I'm getting error while creating resource group using non-globalzones.
My setup:
I have two node cluster running sun cluster 3.2 configured and running properly.
node1: sun5
nide2: sun8
I have create non-globalzone "zone1" in node:sun5
I have create non-globalzone "zone2" in node:sun8
node:sun5# clrg create -n sun5:zone1,sun8:zone2 zonerg
*(C160082) WARNING: one or more zones in the node list have never been fully booted in the cluster mode,verify that correct zone name was entered.*
kindly guide me how to create Apache resource group using non-glabalzones, i'm new to sun cluster 3.2. please guide me step by step information.
Thanks in advance,
veera
Edited by: veeraa on Dec 19, 2008 1:54 AM

Hi Veera,
Actually you are getting a warning message where one of two things could have happened. Either you specified an incorrect zone name or one of the zones has not been fully booted. It's likely that you haven't booted the zones, so please follow this:
zoneadm list -iv
If zone1 or zone2 are not running then boot and configure them
zoneadm -z <zone> boot
zlogin -C <zone>
After that you can continue to follow the step by step instructions at
http://docs.sun.com/app/docs/doc/819-2975/chddadaa?a=view
These may also help
http://blogs.sun.com/Jacky/entry/a_simple_expample_about_how
http://blogs.sun.com/SC/en_US/entry/sun_cluster_and_solaris_zones
Regards
Neil

Error while creating a setup package .

Similar Messages

Maybe you are looking for