Error While creating ABAP Consumer Service using Provider service WSDL.

HI Friends,
We are trying to consume service from Provider service.
Provider service is developed on CE 7.11-NWDS7.11 and published in CE7.11 registry.(used outside in method and implemented in EJB/Deployed/Published/tested) sounds good.
We are trying to consume in ABAP (ECC 6.0 EHP4 SPS16).
when we are trying to create service consumer from se80 selected url : provider WSDL picked up from from Service registry.
At the end of wizard its throwing error.
error description.
Message Policy in Name space "http://schemas.xmlsoap.org/ws/2004/09/policy " is not unique in WSDL.
Unable to generate proxy.
Any pointers to resolve this.
Regards
Chandra

I would suggest to test the service in XML Spy using the same WSDL or the URL of the WSDL. If XML Zpy throws the same error, there could be some problem in the provider service generation itself..!!
VJ

Similar Messages

ERROR WHILE CREATING A DATABASE LINK USING HETEROGENEOUS SERVICES

I'm creating a database link with the Oracle Dataware Builder, and i get the following error:
Probando...
Fallo.
SQL Exception
Error del repositorio: Excepción SQL.
Nombre de la Clase: CacheMediator.
Nombre del Método: getDDEntryFromDB.
Mensaje de Error del Repositorio: ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Generic Connectivity Using ODBC][Informix][Informix ODBC Driver][Informix]Incorrect password or user [email protected] is not known on the database server. (SQL State: 28000; SQL Code: -951)
ORA-02063: preceding 2 lines from PRUEBA_SEH
As you can see i'm using heterogeneus services to connect to a informix database. ALTIADM is a valid user for that database, i don't send my ip address 192.168.0.62, but the error says "[email protected] is not known in the database server". how can i solve it?????

Right places to ask this question are
Heterogeneous Connectivity
Warehouse Builder

Error while creating the DWH tables using DAC

Hi,
I am getting error while creating the DWH tables using DAC. I have created a ODBC DSN using merant driver with DAC repository DB credentials and the test connection is successful. And while creating the tables i gave the olap dw credentials and the DSN name which i created earlier. But it throws the error as below:
Please find the below mentioned error message
=====================================
STD OUTPUT
=====================================
CREATING SIEBEL DATABASE OBJECTS
F:\DAC\bifoundation\dac\UTILITIES\BIN\DDLIMP /I N /s N /u infdomain /p ******* /c DB_DAC /G "SSE_ROLE" /f F:\DAC\bifoundation\dac/conf/sqlgen/ctl-file/oracle_bi_dw.ctl /b "" /K "" /X "" /W N
Error while importing Siebel database schema.
=====================================
ERROR OUTPUT
=====================================
Siebel Enterprise Applications ODBC DDL Import Utility, Version 7.7 [18030] ENU
Copyright (c) 2001 Siebel Systems, Inc. All rights reserved.
This software is the property of Siebel Systems, Inc., 2207 Bridgepointe Parkway,
San Mateo, CA 94404.
User agrees that any use of this software is governed by: (1) the applicable
user limitations and other terms and conditions of the license agreement which
has been entered into with Siebel Systems or its authorized distributors; and
(2) the proprietary and restricted rights notices included in this software.
WARNING: THIS COMPUTER PROGRAM IS PROTECTED BY U.S. AND INTERNATIONAL LAW.
UNAUTHORIZED REPRODUCTION, DISTRIBUTION OR USE OF THIS PROGRAM, OR ANY PORTION
OF IT, MAY RESULT IN SEVERE CIVIL AND CRIMINAL PENALTIES, AND WILL BE
PROSECUTED TO THE MAXIMUM EXTENT POSSIBLE UNDER THE LAW.
If you have received this software in error, please notify Siebel Systems
immediately at (650) 295-5000.
F:\DAC\bifoundation\dac\UTILITIES\BIN\DDLIMP /I N /s N /u infdomain /p ***** /c DB_DAC /G SSE_ROLE /f F:\DAC\bifoundation\dac/conf/sqlgen/ctl-file/oracle_bi_dw.ctl /b /K /X /W N
Connecting to the database...
28000: [DataDirect][ODBC Oracle driver][Oracle]ORA-01017: invalid username/password; logon denied
Unable to connect to the database...
any help is appreciated.
Thanks,
RM

The fact that you are getting an "ORA-01017: invalid username/password; logon denied" message indicates that you are at least talking to the database.
The log shows that username "infdomain" is being used. Can you double check the username and password you have in DAC in a SQL*Plus/SQL Developer session?
Please mark if useful/helpful,
Andy.

Error while creating an outbound idoc using idoc type delvry02

hi,
i getting the following error while creating an outbound idoc(outbound shipping notification) using message type " DESADV" and IDOC TYPE " DELVRY02"
ERROR:
" SPECIFY EITHER ADDRESS NO OR ADDRESS HANDLE"
MESSAGE NO: AM053
Help would be appreciated.
regards
leo

The message is kind of self-explanatory. It seems that some address (delivery address ?) is required but is missing from the IDoc. If it's a syntax error, then the segment with error will appear in red in WE05 transaction.
It is also possible that you have filled some field that you should have left blank and now SAP is trying to find an address based on that field.
Check your IDoc contents. It's really hard to tell from the distance since the requirements and configuration could be very different in different systems. Sometimes the OSS note search by message ID and number is also helpful.

Error while creating Cross-reference table using Xreftool (PIP Ins)

Error while running xref.sh script unable to create cross reference table.
**Error: Exception in thread "main" java.lang.NoClassDefFoundError: oracle/tip/xref/tool/AdminTool**
Could not find xref directory within tip folder (/OracleAS_1/bpel/docs/workflow/oracle/tip)
searched for similar issue in OTN it says issue fixed by upgrading Oracle AS, we are using 10.1.3.4 MLR#8
http://kr.forums.oracle.com/forums/thread.jspa?threadID=835446
steps followed.
Creating Cross-Reference Tables
Complete the following procedure to create cross-reference tables.
To create cross-reference tables
1 Navigate to the following directory:
%SOAHOME%/SiebelODOPPIP/scripts/
2 Open the following file for editing:
xref.sh
3 Set the userid and passwd for logging into BPEL console on the appropriate lines.
4 Set the correct SOA_HOME location on the appropriate line.
5 Save and close the file.
6 Make the file executeable:
chmod +x xref.sh
dos2unix xref.sh
7 Change directory (cd) to integration/esb/bin under %SOAHOME%.
8 Execute ../../../SiebelODOPPIP/scripts/xref.sh.
I am using SOA suite 10.1.3.3 and getting same error
Error: Exception in thread "main" java.lang.NoClassDefFoundError: oracle/tip/xref/tool/AdminTool

Hi Abhijeet,
please check in transaction FI01, about your data consistencies. You can use this wiki help in terms of Address, it it found any useful facts for you
Address Checks - Business Address Services (BC-SRV-ADR) - SAP Library

Error while creating vendor contact person using vmd_ei_api

Hi,
while craeting vendor contact person using maintain_bapi of vmd_ei_api class iam getting error like 'Specify address number or address handle'.
code :
CALL FUNCTION 'BAPI_PARTNEREMPLOYEE_GETINTNUM'
EXPORTING
quantity = 1
IMPORTING
* RETURN =
contactid = lv_contactid
* QUANTITY =
* TABLES
* CONTACT =
ls_contacts1-task = 'I'.
ls_contacts1-data_key-parnr = lv_contactid."ls_knvk-parnr.
ls_contacts1-data-abtnr = '0002'."ls_knvk-abtnr.
ls_contacts1-data-pafkt = '02'."ls_knvk-pafkt.
ls_contacts1-data-parau = 'BNotes'."ls_knvk-parau.
ls_contacts1-datax-abtnr = 'X'.
ls_contacts1-datax-pafkt = 'X'.
ls_contacts1-datax-parau = 'X'.
* Inserting Phone ,Fax and email.
ls_phone-contact-task = 'I'. "Phone
ls_phone-contact-data-telephone = '89655696569'.
ls_phone-contact-data-extension = '778548'.
ls_phone-contact-datax-telephone = 'X'.
ls_phone-contact-datax-extension = 'X'.
APPEND ls_phone TO lt_phone.
ls_phone-contact-task = 'I'.
ls_phone-contact-data-r_3_user = 'X'.
ls_phone-contact-data-telephone = '89845589369'.
ls_phone-contact-data-extension = '858588'.
ls_phone-contact-datax-updateflag = 'X'.
ls_phone-contact-datax-telephone = 'X'.
ls_phone-contact-datax-extension = 'X'.
ls_phone-contact-datax-r_3_user = 'X'.
APPEND ls_phone TO lt_phone.
ls_fax-contact-task = 'I'.
ls_fax-contact-data-fax = '8896589'.
ls_fax-contact-data-extension ='44521'.
ls_fax-contact-datax-fax = 'X'.
ls_fax-contact-datax-extension ='X'.
APPEND ls_fax TO lt_fax.
ls_contacts1-address_type_3-communication-phone-current_state = ' '.
ls_contacts1-address_type_3-communication-phone-phone = lt_phone.
ls_contacts1-address_type_3-communication-fax-current_state = ' '.
ls_contacts1-address_type_3-communication-fax-fax = lt_fax.
ls_contacts1-address_type_3-communication-fax-current_state = ' '.
ls_contacts1-address_type_3-communication-fax-fax = lt_fax.
ls_contacts1-address_type_3-task = 'I'.
ls_contacts1-address_type_3-POSTAL-data-FIRSTNAME = 'Roger'.
ls_contacts1-address_type_3-postal-data-lastname = 'Fedrer'.
ls_contacts1-address_type_3-POSTAL-datax-FIRSTNAME = 'X'.
ls_contacts1-address_type_3-postal-datax-lastname = 'X'.
APPEND ls_contacts1 TO lt_contacts1.
ls_vendor1-header-object_instance = p_lifnr.
ls_vendor1-header-object_task = 'M'.
ls_vendor1-central_data-contact-contacts = lt_contacts1.
ls_vendor1-central_data-contact-current_state = 'X'.
ls_vendor1-central_data-central-data-adrnr = ls_adrnr.
ls_vendor1-central_data-central-datax-adrnr = 'X' .
APPEND ls_vendor1 TO lt_vendor1.
gs_vmds_extern-vendors = lt_vendor1.
DATA:gs_succ_messages TYPE cvis_message,
gs_vmds_error TYPE vmds_ei_main,
gs_err_messages TYPE cvis_message,
gs_vmds_succ TYPE vmds_ei_main.
* Call the Method for creation of Vendor.
CALL METHOD vmd_ei_api=>maintain_bapi
EXPORTING
is_master_data = gs_vmds_extern
IMPORTING
es_master_data_correct = gs_vmds_succ
es_message_correct = gs_succ_messages
es_master_data_defective = gs_vmds_error
es_message_defective = gs_err_messages.
if sy-subrc = 0.
commit work.
Please suggest which fields else i have to pass??

Hi Abhijeet,
here i am showing you some scn help to use maintain bapi of vmd_ei_api class, i think you are missing some data to be uploaded along with there are methods in lsmw, bdc too for this, please go through below links carefully , i hope you will able to solve your problem.
Vendor Master Upload Program - ABAP Development - SCN Wiki
unable to vendor master record update using class vmd_ei_api
Creation of Vendor - VMD_EI_API

Error while create abap proxy

Hi,
I need to create abap proxy in sap system to push the data from sap system to XI.
when i create ABAP PROXY in sap system in Tcode SPROXY,System displays a error
"objects from other name spaces missing" .
So i am not able to activate the abap proxy.
kindly let me know how to solve this error.
Regards,
Ganesh

Are you using the message type created in external system?
Are any of your Data type element refer structure to other namespace.
Error mention that it does not find the detail structure of any of Datatype element. Check all link are available properly.
Gaurav Jain
Points if answer is helpful

Getting error while creating Customer Invoice Request via Web Service

Hello,
I am trying to create customer invoice request via web service.
But I am getting the error message "No scheme configuration found for scheme '&CIRHP&' " continuously.
It is working fine in reference tenant. But using the same payload its giving error in another tenant.
Can you please tell me what is the root cause for this error?
I have included the payload used in the prototype tenant(Payload.txt) and screen shot of the error.
Thanks and Regards,
Sriram

Hi,
Check the WSDL file is wellformed or not..You can test it using tools like XML Spy.
Might be the attribute tag is missing something..If WSDL file is correct then, create proxy by selecting the WSDL file from local machine..
Regards,
Sunitha

Getting errors while creating model in webdynpro(using JAVA)

hii ,
am using EJBs ....n while creating model in webdynpro, while trying to include jars of wrapper class and command bean in model its giving an error that the jars already exist in model classes....
plz help out....

hi,
if you r importing the bean for second or nth time , delete your previous imports from model in your application and also delete the previous mappings in the component controller and corresponding view controllers and recreate it.(importing the JARs of both EJB and Bean in WD Library and recraete the java build paths,references) .
revert back if issue persists..
Thank you
Shravan.

Error while creating a report that uses Oracle OCI JDBC connectivity

Please let me know why my CR and LF characters are removed from my forum posting *****
Hi,
I was trying to create a report that uses Oracle OCI JDBC connectivity. I am using Eclipse3.4 download from "cr4e-all-in-one-win_2.0.2.zip". I have successfully created a JDBC OCI connection.
The connection parameters are given below:
URL: jdbc:oracle:oci8:@xe
Database: xe
username: <userName>
password: <password>
I have tested the above connection in Data source Explorer and it works fine!!!
But I am getting the following error when I drag-and-drop a table from the list of tables. Not sure what I am missing here? Any help is highly appreciated.
com.businessobjects.reports.jdbinterface.common.DBException: InvalidURLOrClassName
     at com.crystaldecisions.reports.queryengine.driverImpl.jdbc.JDBCConnection.Open(Unknown Source)
     at com.crystaldecisions.reports.queryengine.JDBConnectionWrapper.Open(SourceFile:123)
     at com.crystaldecisions.reports.queryengine.Connection.br(SourceFile:1771)
     at com.crystaldecisions.reports.queryengine.Connection.bs(SourceFile:491)
     at com.crystaldecisions.reports.queryengine.Connection.t1(SourceFile:2979)
     at com.crystaldecisions.reports.queryengine.Table.u7(SourceFile:2408)
     at com.crystaldecisions.reports.dataengine.datafoundation.AddDatabaseTableCommand.new(SourceFile:529)
     at com.crystaldecisions.reports.common.CommandManager.a(SourceFile:71)
     at com.crystaldecisions.reports.common.Document.a(SourceFile:203)
     at com.businessobjects.reports.sdk.requesthandler.f.a(SourceFile:175)
     at com.businessobjects.reports.sdk.requesthandler.DatabaseRequestHandler.byte(SourceFile:1079)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.do(SourceFile:1163)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(SourceFile:657)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(SourceFile:163)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.a(SourceFile:525)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.call(SourceFile:523)
     at java.util.concurrent.FutureTask$Sync.innerRun(Unknown Source)
     at java.util.concurrent.FutureTask.run(Unknown Source)
     at com.businessobjects.crystalreports.designer.core.util.thread.ExecutorWithIdleProcessing$3.doWork(ExecutorWithIdleProcessing.java:182)
     at com.businessobjects.crystalreports.designer.core.util.thread.AbstractCancellableRunnable.run(AbstractCancellableRunnable.java:69)
     at com.businessobjects.crystalreports.designer.core.util.thread.PriorityTask.run(PriorityTask.java:75)
     at com.businessobjects.crystalreports.designer.core.util.thread.PriorityCompoundCancellableRunnable.runSubtask(PriorityCompoundCancellableRunnable.java:187)
     at com.businessobjects.crystalreports.designer.core.util.thread.PriorityProgressAwareRunnable.runSubtask(PriorityProgressAwareRunnable.java:90)
     at com.businessobjects.crystalreports.designer.core.util.thread.PriorityCompoundCancellableRunnable.doWork(PriorityCompoundCancellableRunnable.java:144)
     at com.businessobjects.crystalreports.designer.core.util.thread.AbstractCancellableRunnable.run(AbstractCancellableRunnable.java:69)
     at com.businessobjects.crystalreports.designer.core.util.thread.ExecutorWithIdleProcessing$IdleTask.run(ExecutorWithIdleProcessing.java:320)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Unknown Source)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Thanks
Karthik
Edited by: KARTHIK1 on Oct 14, 2009 9:38 PM

Hi Ted,
Thanks for the feedback. I was able to create a report in Creystal Reports Designer 2008 using OCI. It is not allowing only in the Eclipse plugin. In our environment we are not allowed to user Oracle thin connections and ONLY OCI is allowed.
1) Can you please let me know if there is a way to do this?
2) Will it allow data sources using native database driver?
3) If so, can I use JRC to create these reports from a desktop java program?
Thanks & Regards
Karthik
Edited by: KARTHIK1 on Oct 15, 2009 4:38 PM

Error while creating the sales order using Proxy

Hi Folks,
I am trying to create a Sales Order using Proxy via BAPI "BAPI_SALESORDER_CREATEFROMDAT2" :
and i got this type of standard error message
<Message>FB call: insufficient parameters</Message>
few days back only i used the same bapi for creating the Sales Order and did it successfully...using the same parameters
I don't have any clue about this type error .
Kindly guide .
Regards,

Hi Nikhil,
How refreshing the cache and restart the server will help ?
basically i am testing the scenario at R/3 end only by generating XML template in SPROXY.
My ECC 6.0 is on sp 12....I am not sure is it configuration related error or a bug ? as i have used the same code in ECC 6.0 with sp 09.
regards,

Error while creating physical standby database using Oracle Grid 10.2.0.5

Hi All,
I am setting up data guard using oracle grid.
Primary database version: - 10.2.0.4
Standby database version: - 10.2.0.4
Primary OS Red Hat Enterprise Linux AS release 4 (Nahant Update 8)2.6.9
Standby OS Red Hat Enterprise Linux AS release 4 (Nahant Update 8)2.6.9
I am creating physical standby database using EM. But it is getting failed with error message in sqlnet.ora file
Fatal NI connect error 12533, connecting to:
(DESCRIPTION=(ADDRESS_LIST=)(CONNECT_DATA=(SERVICE_NAME=INPRDSB_XPT)(SERVER=dedicated)(CID=(PROGRAM=oracle)(HOST=indb50.oii.com)(USER=oracle))))
VERSION INFORMATION:
        TNS for Linux: Version 10.2.0.4.0 - Production
        TCP/IP NT Protocol Adapter for Linux: Version 10.2.0.4.0 - Production
Time: 17-AUG-2010 02:40:07
Tracing not turned on.
Tns error struct:
    ns main err code: 12533
    TNS-12533: TNS:illegal ADDRESS parameters
    ns secondary err code: 0
    nt main err code: 0
    nt secondary err code: 0As we can see, address_list is empty.
Can anyone suggest what could be the reason behind this?

Dear user13295317,
Here is the error explanation;
Oracle Error :: TNS-12533
TNS:illegal ADDRESS parameters
Cause
An illegal set of protocol adapter parameters was specified.
In some cases, this error is returned when a connection cannot be made to the protocol transport.
Action
Verify that the destination can be reached using the specified protocol.
Check the parameters within the ADDRESS section of TNSNAMES.ORA.
Legal ADDRESS parameter formats may be found in the Oracle operating system specific documentation for your platform.
Protocols that resolve names at the transport layer (such as DECnet object names) are vulnerable to this error if not properly configured or names are misspelled.Hope That Helps.
Ogan

OutofMemory Error while sending file to database using Web services

I have a file of 30MB to be written to the MySQL database. I am doing this in Axis web services and it gives me the following error:
(I am using Tomcat as the application server and Apache as the web server, Axis 1.3 and MySQL standard 5.0.21 version. I have set the minimum and maximum heap size and it works well without using the web service (just uploading and downloading from the database using a simple java program). Another thing to notice is that I can send a file of almost 10MB size to the database using web service without any problem. But it doesn't work with the 30 MB .)
java.lang.OutOfMemoryError: Java heap space; nested exception is:
     java.lang.OutOfMemoryError: Java heap space
AxisFault
faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server.generalException
faultSubcode:
faultString: java.lang.OutOfMemoryError: Java heap space; nested exception is:
     java.lang.OutOfMemoryError: Java heap space
faultActor:
faultNode:
faultDetail:
     {http://xml.apache.org/axis/}hostname:dbr221d.dbr.louisville.edu
java.lang.OutOfMemoryError: Java heap space; nested exception is:
     java.lang.OutOfMemoryError: Java heap space
     at org.apache.axis.message.SOAPFaultBuilder.createFault(SOAPFaultBuilder.java:222)
     at org.apache.axis.message.SOAPFaultBuilder.endElement(SOAPFaultBuilder.java:129)
     at org.apache.axis.encoding.DeserializationContext.endElement(DeserializationContext.java:1087)
     at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.endElement(AbstractSAXParser.java:633)
     at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.scanEndElement(XMLNSDocumentScannerImpl.java:719)
     at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(XMLDocumentFragmentScannerImpl.java:1685)
     at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDocumentFragmentScannerImpl.java:368)
     at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:834)
     at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:764)
     at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:148)
     at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(AbstractSAXParser.java:1242)
     at javax.xml.parsers.SAXParser.parse(SAXParser.java:375)
     at org.apache.axis.encoding.DeserializationContext.parse(DeserializationContext.java:227)
     at org.apache.axis.SOAPPart.getAsSOAPEnvelope(SOAPPart.java:696)
     at org.apache.axis.Message.getSOAPEnvelope(Message.java:435)
     at org.apache.axis.handlers.soap.MustUnderstandChecker.invoke(MustUnderstandChecker.java:62)
     at org.apache.axis.client.AxisClient.invoke(AxisClient.java:206)
     at org.apache.axis.client.Call.invokeEngine(Call.java:2784)
     at org.apache.axis.client.Call.invoke(Call.java:2767)
     at org.apache.axis.client.Call.invoke(Call.java:2443)
     at org.apache.axis.client.Call.invoke(Call.java:2366)
     at org.apache.axis.client.Call.invoke(Call.java:1812)
     at edu.louisville.bcc_ma.ws.lab.LabServiceSoapBindingStub.storeGZIPFile(LabServiceSoapBindingStub.java:472)
     at edu.louisville.bcc_ma.lims.labclient.container.SendGZIPFile.sendFile(SendGZIPFile.java:69)
     at edu.louisville.bcc_ma.lims.labclient.container.LoginContainer.login(LoginContainer.java:58)
     at edu.louisville.bcc_ma.lims.labclient.container.LoginContainer.main(LoginContainer.java:44)

Sorry for the delayed response here, forget to add it to my watchlist. I didn't catch if you were using Java 1.5 or not. Prior to 1.5 the default maximum heap space was 64MB which with the overhead of the appserver might be your problem.
Take a look at http://java.sun.com/j2se/1.5.0/docs/guide/vm/gc-ergonomics.html and the java -Xmx <size> command line option to change the default (I believe the size argument is in bytes, but don't hold me to that). I think you can pass that as a command line option to the startup script, but you should check the doco to see if it needs to be wrapped in some other arg etc.,
I seem to recall running into this same problem a few years back when I had a servlet doing some intense graphics processing on the fly and setting this option fixed the problem.

Error While Creating Custom IDOC Segment using WE31

Could anyone please help me resolve this issue.
I am getting following error when trying to create a custom IDOC segment type using WE31.
"Name range violation: Name Z1WOHDR not permitted in SAP system"
Segment type trying to create: Z1WOHDR
Regards
Venu

Try changing the name , But i am not getting any such error with the name you are using.
Just Try with some onther name

Error while creating a BO Universe (using IDT) on top of SAP HANA Calculation View with Input Parameters

Hi All..
We are trying to create a Universe (using IDT-Version4.0) on top of the HANA Calculation view. The Calculation view has 4 input parameters, So
in Universe side we have created the respective prompts. For the creation of derived table we have used the following code
SELECT *
FROM "_SYS_BIC"."<schema_name>.<CV_Calculation_View_test>"
'PLACEHOLDER'=('$$IP_A$$','@Prompt(A)'),
'PLACEHOLDER'=('$$IP_B$$','@Prompt(B)'),
'PLACEHOLDER'=('$$IP_C$$','@Prompt(C)'),
'PLACEHOLDER'=('$$IP_D$$','@Prompt(D)')
While validating the above code we are getting an error.
I have attached the snapshot of that error for your reference. Please find the attachment and help me in resolving it.
Thanks in advance.

Hello George,
I don't have any personalization set on the info space. Also I am using mapped Account in BI to connect to HANA. The confusing part is that it is able to validate the infospace with the input parameters and index it. However query does not return any results. I even tried running the same query which explorer sends to HANA in the SQL editor and there too the same results,the query does not return anything. The model does return data when I do a data preview and if accessed from other tools like AAO.
Also when I use SSO connection to HANA, indexing of the infospace fails. Where can I see the error log?
Thanks,

Error While creating ABAP Consumer Service using Provider service WSDL.

Similar Messages

Maybe you are looking for