Error while creating absence Quotas - Error no 83

Hi Friends,
Would appreciate help on this .
While creating time quota-
am geting this error :
<b>Error while creating absence Quotas.
Error no - 83</b>
Reagards,
Srikanta

Hi
Don't know if your question has been resolved, but check the leave cycle date types on IT0041 and IT0001 and IT0007 should all be aligned.
Hope this helps.

Similar Messages

Error while creating absence record in PA30 using 2001 infotype

Hi all,
iam getting an error while creating absence record for infotype 2001for LOP(unpaid)
error : No quota available for att./abs. 6000 for pers. no. 61000052 between 31.12.2009 and 31.12.2009
i have did
Create a absence type LOP
Determine Entry Screens and Time Constraint Classes
Define Counting Rules
Assign Counting Rules to Absence Types
Payroll: India>>Absences>Describe Absence Valuation Rules 01 Unpaid Leave
Group Absences for Absence Valuation>>Absence valuation rule>>F4 country grouping 40>> assign 01Unpaid Leave
please solve this

Actually I don't know how your system is configured.
However, the error you're receiving seems you have assigned the absence type to a quota type.
Please go to your counting rule and check whether Deduction rule - absence quotas - within entitlement field is filled.
If yes, get the deduction rule value and go to
SPRO Time man- Time data rec - Absences - Absence Cat - Abs counting - rules for counting (new) - deduction rules for abs quotas and check the quota type in here.
If there is a quota assignment in place, before creating an IT2001 you need to create a IT2006 for that specific time period.
Or, you need to delete the quota assignment via two config steps mentioned above.
Regards,
Dilek

Error while creating a quote/quick quote

Dear Experts
While creating a quote/quick quote, the system is showing an error, and save also fails. The error is: "Your current credentials do not grant access to this product"
Kindly help to reolve this.
I am using the system to configure certain demo scenarios.
Regards
Malay

Thanks Ankur Godre , Pragya Pande, Surjeet Bhati
Thanks a lot for your suggestions. I suppose the problem has to do with the Industry solutions incorporated in scoping.
I selected Insurance, and excluded retail (the initial selection).
Now I have reverted the changes, and everything is working fine.
Though I will keep on working to resolve this issue and once successful, will share at this forum.
Thank you everyone.
Regards
Malay Dwivedi

Error while generating Absence Quota

Hi All,
While generating Absence quota iam encountring an error message " No quota type for key 1 01 02 20090911"
We are using Time Mgt Status 9 and RPTIME00.
Can you pls share your inputs.
Thanks for your time.
Kind regards
Sathya

1 is EG
01 is ur PSG
02 is ur Selection rule group
Check the grouping in the table T559L

Error While Generating Absence Quotas

Hi HR Gurus
I have facing a problem while generating absence quotas, It show message "
E     81000001     No validity interval for key 1 81 01
E     81000001     You have not selected any generation rules
E     81000002     No validity interval for key 1 81 01
E     81000002     You have not selected any generation rules
E     81000003     No validity interval for key 1 81 01
E     81000003     You have not selected any generation rules
E     81000004     No validity interval for key 1 81 01
E     81000004     You have not selected any generation rules
Why this error show,Let me know where i have mistake in customisation.
Thanks in advance
Regards
Rajiv K

Hai Maha,
You did not assign the validity interval for the quota.
1 is Esg grouping
81 is Psg grouping
01 is quota type no.
in selection rule table you did not maintain the proper data for particular quota.
for that go for V_t559L in this table maintain the validity and deduction intervals. There you can select the start of validity interval field and end of validity period and same to deduction interval start and end deduction validity..
And also check the QUOMO feature and PSg grouping for time recording.
Good luck
Devi

Error when creating absence quota IT2006

Hi all,
When entering leave request through ESS for this pernr, I am getting an error message which reads No quota available for this pernr.
But when I was creating absence quota IT2006 I got an error message 'No validity interval for key 1 50 10'.
If I bypass the message, even though I type some constant in the number field for any absence type, when saving(or when clicking the green colored tick mark) its getting defaulted to zero.
Is there any IMG configuration missing? Please provide some idea on this.
Thanks a lot in advance.

Hi Johnson,
The guess the reason for the quotas being automatically assigned zero is that, these quotas would be defined in such a way that, they can only be generated and not input. Please refer to the table V_556A_B, and see what is being entered against the quota there. Enter it as No Generation for you to be able to enter quotas in the IT2006. If you have enabled the "No Generation" then you wouldn't be able to enter data in IT2006.
The reason for the error is that, you wouldn't have specified the date interval in which the Absence Type can be deducted. Please check that too.
Thanks,
Krish

Error while creating SC: Internal Error - termination type TH_RES_FREE

Hi I encountered this error while creating a SC. All attributes for this user are maintained and the "check user" transaction does not give any error.
Amol Mate
Error when processing your request
What has happened?
The URL http://punhjwsapsrm:8000/sap/bc/gui/sap/its/bbpsc02/! was not called due to an error.
Note
The following error text was processed in the system SSS : Internal Error
The error occurred on the application server PUNHJWSAPSRM_SSS_00 and in the work process 1 .
The termination type was: TH_RES_FREE
The ABAP call stack was:
Function: B40B_READ_TABLE of program SAPLBBP_BD_DRIVER_40B
Function: META_READ_TABLE of program SAPLBBP_BD_META_BAPIS
Form: LOCATIONS_READ of program SAPLBBP_ATTR_F4
Function: BBP_ATTR_F4_SLOC_PPOMA of program SAPLBBP_ATTR_F4
Form: STG_LOC_GET_FOR_LOCATION of program SAPLBBP_SC_APP
Form: STG_LOC_GET of program SAPLBBP_SC_APP
Form: LOCATION_STG_LOC_GET of program SAPLBBP_SC_APP
Form: USER_ATTRIBUTES_GET of program SAPLBBP_SC_APP
Form: SC_INIT of program SAPLBBP_SC_APP
Function: BBP_SC_APP_EVENT_DISPATCHER of program SAPLBBP_SC_APP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system SSS in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server PUNHJWSAPSRM_SSS_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 1 in transaction ST11 on the application server PUNHJWSAPSRM_SSS_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http-c:100-u:PTEST -l:E-s:SSS-i:PUNHJWSAPSRM_SSS_00 -w:1-d:20051121-t:171904-v: TH_RES_FREE-e:Internal Error
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team

Hi Amol,
First of all the sicf transaction is to be used only if you use the internal ITS.
Now you have to put an external breakpoint in the source code of the ABAP Program or FM you want to debug , one of these in your case :
Function: B40B_READ_TABLE of program SAPLBBP_BD_DRIVER_40B
Function: META_READ_TABLE of program SAPLBBP_BD_META_BAPIS
Form: LOCATIONS_READ of program SAPLBBP_ATTR_F4
Function: BBP_ATTR_F4_SLOC_PPOMA of program SAPLBBP_ATTR_F4
Form: STG_LOC_GET_FOR_LOCATION of program SAPLBBP_SC_APP
Form: STG_LOC_GET of program SAPLBBP_SC_APP
Form: LOCATION_STG_LOC_GET of program SAPLBBP_SC_APP
Form: USER_ATTRIBUTES_GET of program SAPLBBP_SC_APP
Then launch the transaction in IE, once the program reaches a breakpoint, you'll get the ABAP debuger in IE.
Regards.
PS: if it doesn't work, put the parameter ~generatedynpro in BBPGLOBAL service to have it applied to all BBP transactions
Vadim

Issue while creating Absence Quota for one employee

Hi Friends,
Our customer has a weird issue. When time evaluation is run, One Absence Quota type (Leave in Bank) is not getting generated for Only One Employee.
This leave type has been updated with quota in IT 2006 after running PT60 for all other employees in the PA. The issue is only with one employee.
This absence quota is assigned "Increase" in table V_556A_B (Permit Generation of Quotas in Time Evaluation)
Can any one please suggest how to generate the missing quota for this employee. Thank you !!

Hi
Thanks for your replies !!
Please find the screenshots attached.
Leave in Bank Absence type which is valid for 2014 is missing in IT 2006 instead This absence quota valid upto 31.12.9999 is present.
Current requirement is to remove the quota which is valid upto 31.12.9999 and replace the quota which is valid upto 31.12.2014.
I have checked for some PERNRs with same EG/ESG/PA/PSA combination. They have the absence quota valid upto 31.12.2014 Only.

Error while creating absence

Hi,
I have a user that is supposed to join company on future date: 15-07-2010... The record has been succesfully created in Oracle HRMS but when i try to create an absence (HR Manager -> Absence) for the user from 15-07-2010 to 30-07-2010 i get this error message:
ORA-01403: no data found
ORA-06512: at "APPS.HR_PERSON_ABSENCE_API", line 876
FRM-40735: ON-INSERT trigger raised unhandled exception ORA-01403.
Can anyone tell what could be the problem? Can I create an absence for future dated user (i think it shoul be possible)?
Thanks.

If in the absence form, you have date tracked to the future date and entered Absence which is not of Sickness type, then you should be able to enter the absence.
1. Make sure the Element link for Absence Element created is valid for the employee.
2. Absence Category is not of type Sickness.

Error while creating Absence as "APP-PAY-51271: The assignment is not eligible for the element

Hi,
"APP-PAY-51271: The assignment is not eligible for the element."

Hi Nandhu,
Can you check below two things which can be cause of this error:
1. The link definition of the non-recurring element which is tagged with this absence type, as a best practice this should be an open link. If the link definition and the assignment eligibility is not matching then you may receive this error.
2. If you have defined an accrual plan for this absence type,then check if the accrual plan recurring element is been tagged to the assignment for which you are receiving this error.
Thanks,
Sanjay

Error while creating sequence - related to xdb installation?

I'm getting the following error while creating a sequence -
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-20000: Trigger xdb_installation_trigger does not support object creation of
type SEQUENCE
ORA-06512: at line 32
oracle xml db was installed on this instance.
Is there a way around it? We want oracle xml db installed but we still want to be able to create and drop sequences!

Hi Expert,
In T-Code: OB52, We need to open the period 001 for Year - 2012 for the Account Type - S and for GL Account - 799999.
Configure as shown below for your Posting Period Variant:
Account Type: S
From Account: (Only provide any GL Accounts From Range, If you require any specific GL Accounts to be open. Else leave blank)
To Account:(Only provide any GL Accounts To Range, If you require any specific GL Accounts to be open. Else leave blank)
From Period: 01
Year: 2012
To Period:01
Year:2012
From Period:13
Year:2012
To Period:16
Year:2012
Save
Regards,
GK
SAP

Getting error while creating Communication capability

Hi,
I am getting this error while creating communication capability of Host. I have successfully configured the TP communication capability. Even I have tried many times after changing the names given by me during configuration.
Error creating Communication Capability
java.lang.Exception : Error -: AIP-16012: Parameter: uri is unique for object Endpoint: Error -: AIP-11052: Writing following objects: Endpoint failed due to following constraint violation: ENDPOINT_UK. UNIQUE CONSTRAINT VIOLATION: java.sql.SQLException: ORA-20003: Endpoint_UK. Unique constraint violation ORA-06512: at "B2B.TRG_ENDPOINT_INS", line 17 ORA-01403: no data found ORA-04088: error during execution of trigger 'B2B.TRG_ENDPOINT_INS'
Please tell me what is the source of error.
Thanks in advance.
Regards,
Anuj Dwivedi

Hi I am getting this error while creating communication capability --
Error creating Communication Capability
java.lang.Exception : Error -: AIP-16012: Parameter: trading Partner is unique for object Certificate: Error -: AIP-11052: Writing following objects: Certificate failed due to following constraint violation: CERTIFICATE_UK. UNIQUE CONSTRAINT VIOLATION: java.sql.SQLException: ORA-20003: Certificate_UK. Unique constraint violation ORA-06512: at "B2B.TRG_CERTIFICATE_INS", line 20 ORA-01403: no data found ORA-04088: error during execution of trigger 'B2B.TRG_CERTIFICATE_INS'
Please tell that where could be the problem?
Thanks.
Regards.
Anuj Dwivedi

Error msg in create absence quota during hiring.

Hi guys,
when i hire a new employee the create absence quota displays the following error.
"No validity interval for key 2 32 17"
i know that i need to add the new entry in the view Base Entitlement for Absence Quota Generation
(V_T559E)
my problem is that i dont know exactly what the key means
i think that is
2 is for Employee Subgroup Grouping for Time Quota Types
32 i dont have idea
17 the rule for QUOMO
any ideas?

Hi Javier,
Please check tabel V_T559D. Looks like this error was caused by no validity period setting.
2 is for employee subgroup (check table V_503_E)
32 is for personnel subareas (check table V_001P_I)
17 is for vacation quota type
Regards,
Jim

While creating RFx getting error

hi
we are using SRM 7 SP13 classic scenario.while creating RFx getting error.
Line 0001: Item type 'Service' not allowed for this Item.
i created SC with free text and selected type -service .when purchaser is trying to create RFx getting error like
Line 0001: Item type 'Service' not allowed for this Item
please suggest if anyone aware about issue.
Regards
Vijay Patil

Hi Vijay ,
SRM does not support hierarchy in service for operational documents like PO, contract, confirmation and invoice in SRM 7. It does support hierarchy in service only for RFx doucments. You need to activate the hierarchy template for SRM for that.
This error comes from the validation regarding item process type. You could trace the error by setting an external breakpoint at class /sappssrm/cl_ih_cust_prov, method: get_allowed_ipt.
Refer Below notes and you would be able to find a solution :
OSS note Note 1267549 - SRM7.0: Creation of new transaction types for RFx and Quote.
Note 1428404 - Hierarchy template for a process type historic data maintain
Note 1333782 - Unable to add Shopping Cart items to Rfx
Note 1279198 - Advanced hierarchy handling in PPS 7.0 SP2 for PO,SC,CTR,RFX
Note 1271164 - Hierarchy UI changes for SC (SP02)
Let me know your comments

Error while creating order (IBE_SC_ERR_RELOAD_C_MEMBER_UPD)

we are facing issue while creating Order, the error says “Your cart has been updated by another member. We have reloaded it for you. Please reenter your changes.” (IBE_SC_ERR_RELOAD_C_MEMBER_UPD) .
It appears if l_last_upd_party_id = l_owner_party_id then this error is reported (PKG IBE_QUOTE_MISC_PVT.Validate_user_update ).
Please suggest..
24-FEB-2014:13:49:16 IBE no sharee number
24-FEB-2014:13:49:16 IBE quote_source_code of cart passed in=IStore Account
24-FEB-2014:13:49:16 IBE Owner flow with env. userid: 02/24/2014:13:49:16
24-FEB-2014:13:49:16 IBE Validate_user_update: Before Last update date validation,p_last_update_date= 24.02.2014
24-FEB-2014:13:49:16 IBE Validate_user_update: Last update date validation START
24-FEB-2014:13:49:16 IBE Validate_user_update: l_last_update_date=02/24/2014:13:49:16
24-FEB-2014:13:49:16 IBE Validate_user_update: p_last_update_date=02/24/2014:13:47:45
24-FEB-2014:13:49:16 IBE Validate_user_update: l_last_upd_party_id : XXXXXXXX
24-FEB-2014:13:49:16 IBE Validate_user_update: l_owner_party_id : XXXXXXXX
24-FEB-2014:13:49:16 IBE Validate_user_update: l_resource_id :
24-FEB-2014:13:49:16 IBE Validate_user_update: raising Quote_needs_refresh error : IBE_SC_ERR_RELOAD_C_MEMBER_UPD
24-FEB-2014:13:49:16 IBE End:Expected exception:IBE_Quote_Misc_pvt.validate_user_update
24-FEB-2014:13:49:16 IBE Expected exception in IBE_Quote_Checkout_Pvt.SubmitQuote

Hello,
This is an expected message when a Shared Cart has been updated by another user.
There is a check to see if a Member or the Owner updated the Shared Cart.
Do you have updates to the cart/quote being done via Quoting? Do you have reproducible steps for this error message?
Thank you,
Debbie

Error while creating absence Quotas - Error no 83

Similar Messages

Maybe you are looking for