Error while creating and opening a ERP sales order in SAP CRM

Hi,
I am getting an error while creating or opening a ERP sales order from SAP CRM.
"Creation of the ERP Transaction failed" this is the error i'm getting while creating. when i try to open an existing sales order I'm getting a dump.
Attached the dump screen shot. From the dump analyasis it seems the transactions are not loaded through LORD framework.
The RFC connection seems to fine as i have tested accessing an ECC RFC FM through a sample program and its successful..
please help..
Thanks
Krishna

Hello Krishna,
Did you get a solution to this? I have the same dump message.
As a matter of fact, we already use ERP Sales Order and it works fine. But I have recently configured a new sales order document type, and the dump occurs only for this new Z order type.
Thanks a lot,
Luis.

Similar Messages

Is it possible to use variant configuration (with a Non-SAP solution) when creating ERP sales orders in SAP CRM WebUI

Hello,
our customer plans to use a Non-SAP solution for variant configuration (Camos) in SAP ERP (ECC 6.0) and in SAP CRM 7.0 EHP1 as well.
ERP sales orders (and ERP quotations) should be created in SAP CRM (CRM WebUI).
Is it possible to use variant configuration (with an external variant configuration tool) when creating ERP sales orders and quotations in the SAP CRM WebUI or do we have to implement SAP IPC for this?
Thanks in advance.
Regards,
AEV

Dear AEV,
I think LORD (lean orders) should work with variant configuration as well. In the note 1236015 there is not restriction listed. However you need lord2 activated in ECC, and ECC system should be on EHP4.
Best regards
Rene

Error while creating a delivery from a sales order

Hi Folks,
when i try to create delivery of a sales order, i am getting following error:
" Item 000030: delivery split due to conflicting header data (FKARV: ZF2C <-> F8) "
please help me in correcting this error.
thanks in advance.

Hi,
The field FKARV is for Proposed billing type for a delivery-related billing doc.
Now here in your case billing document if ZF2C and another is F8 so it is splitting, check this
Kapil

Budget control in project WBS'e while creating the auto PR from Sale order

Hi experts,
we are creating the auto pr from sales order for trading process with budget wbs element. but commitment is not posted in project wbs were as pr is created through sale order
pls suggest if any additional setting is required to post commitment while creating auto pr from sale order.
rgds
rajesh

Check account assignement categories in SD for PR creation and See if you can make PR to be created with WBS as account assignement like we do in OPTT.

An error occurred while creating and opening the C++ browsing database file.

Hi,
I am getting the following error. I tried to download the x86 and x64 versions of SQL Server Compact 3.5 & CE 4.0 and installed but that is not working. I tried with changing location of the project and its not working too. I am using windows 7 enterprise
and VS 2010 professional SP1. Many thanks in advance.
Arshad
I have tried the solutions on the following links but no one worked :(
http://social.msdn.microsoft.com/Forums/en-US/vcgeneral/thread/98f2441b-a50a-4d43-9200-9ca972d4ac86
http://social.msdn.microsoft.com/Forums/en-US/Vsexpressvc/thread/53e4b057-e0e2-42c6-9320-792bb7b82089
http://social.msdn.microsoft.com/Forums/en-US/vssetup/thread/20d33b1b-d287-4f29-84c5-4ffb84c66b7c
I have
*Uninstalled and reinstalled both 32-bit and 64-bit versions of Microsoft SQL Server Compact 3.5 Service Pack
* Verified any existing .sdf is deleted
*Verified directory that .sdf is supposed to be written to is writable (I do see the .opensdf when it tries to create the sdf)
*Ran a repair of visual studio
*Uninstalled completely VS and Sql Server then reinstalled it.
None of this fixes the problem for me? Please help.
Muhammad Arshad Awan
Muhammad Arshad Awan

Hi,
I have solved the issue as below:
This error was started when I install a software which I have made myself and it uses sql server compact edition 3.5.
I saw when I manually replaced the sql related files from "C:\Program Files (x86)\Microsoft SQL Server Compact Edition\v3.5" with the files which my software setup had "version 3.5.5386.0" then the error started. And if copy back the latest version 3.5.8080.0
then it disappear. So use latest sql files in your software too.
My software was replacing the the latest files with older version.
Muhammad Arshad Awan

Termination error while creating and saving Work Order from a Notification

Hi All,
While creating Work Order from a Maintenance Notification, we get a error message "Update Termination OPROL Initial Number". This happens even while creating Maintenance Notification & Work Order separately and assigning the Notification in the Objects tab of the Order subsequently.
Could any body please help in this issue.
Thanks,
SS

Hi Sourabh,
Please check the link:
Express Document Update terminated while Scheduling Preventive single Plan
it will help you, it is actually the Number range issue.
Regards,
Yawar Khan

Problem while creating new item in the sale order in case of Thirdparty

Dear Gurus
The following error is coming
while adding the new item with quantity in the sale order in case of third party .
Error Info... 00 671: ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPREC
Update key... 482ACBD89C7D0067E10080000A8C681C
Can give any idea abt this.
Rgds
Surya

Hi
This error comes up due to number range problem in the
tables.
As you have said this is a third party Sales order, just check if this is relevant to the PR being generated or the Sales order getting created.
Check the Current number of the PR document type in the EBAN table & check if it is the same for the Number ranges in customizingin OMH7.
If they are not the same... & the current number in OMH7 is smaller than the Number in the table EBAN , you need to change the current number equal to the EBAN table.
If this is the case fior sales orders similarly check for Sales order table & sales order number range object.
reward points if useful
Thanks & Regards
Kishore

Create and Change functionality for Sales order

Hii All,
            Can any one please suggest me any Standard program or BAPI or IDOC for Sales order, it should cover create as well as change fuctionality of Sales order.
this is very urgent to me.
Suitable Answer will be Rewarded.
Thankyou,
Shobha.

For change you can use:
BAPI_SALESORDER_CHANGE         Sales order: Change Sales Order
For create you have the following choices:
BAPI_SALESORDER_CREATEFROMDAT1 Sales order: Create Sales Order
BAPI_SALESORDER_CREATEFROMDAT2 Sales order: Create Sales Order
BAPI_SALESORDER_CREATEFROMDATA Create Sales Order, No More Maintenance
BAPI_SALESDOCU_CREATEFROMDATA with business object 'BUS2032'
The difference between the create ones is the functionality you get e.g. create_from_data2 is the 'most powerful' but you also have to provide the most data. It just depends on what you want it to do.
In terms of IDOCS:
message type:
SALESORDER_CREATEFROMDAT201 or
SALESORDER_CREATEFROMDAT202 or
ORDERS05
Hope that helps,
Michael
Here is an example we use, you might want to populate additional fields or leave fields out in case you want different data to be transferred to the IDOC - however some fields are mandatory.
create the order header structure
ls_header-doc_type   = ls_screen-order_type.
ls_header-sales_org = gc_vkorg_aa01.
ls_header-distr_chan = gc_distr_aa.
ls_header-division   = gc_divis_aa.
ls_header-purch_no   = ls_screen-po_num.
ls_header-po_method = ls_screen-po_source.
ls_header-ship_cond = ls_screen-ship_cond.
create partner input table (sold to)
ls_partner-partn_role = gc_role_sold.
ls_partner-partn_numb = ls_screen-sold_to.
APPEND ls_partner TO lt_partner.
create partner input table (ship to)
ls_partner-partn_role = gc_role_ship.
ls_partner-partn_numb = ls_screen-ship_to.
APPEND ls_partner TO lt_partner.
items are added by looping at a table
    ls_item-material = <fs_upload>-matnr.
    ls_item-req_qty = <fs_upload>-quantity.
process the quantity, it needs to be three decimals, because it
will be moved into a string in the BAPI and divided by 1000 before
it is moved back into a number field (1.500 => 001500 => 1.5)
    ls_item-req_qty = ls_item-req_qty * 1000.
truncate remaining decimal places if exist (1.2525 => 1252.5 => 1252 => 1.252)
    ls_item-req_qty = trunc( ls_item-req_qty ).
    price is taken from the file
      ls_item-cond_type = gc_cond_so_upld_price.
      ls_item-cond_val1 = <fs_upload>-price.
    condition one (price) is multiplied by 10 in the BAPI
      ls_item-cond_val1 = ls_item-cond_val1 / 10.
    no discount
      ls_item-cd_type2   = gc_cond_so_upld_disc.
      ls_item-cd_value2 = 0.
    ls_item-item_categ = ls_screen-item_cat.
      APPEND ls_item TO lt_item.
then BAPI is called
CALL FUNCTION 'BAPI_SALESDOCU_CREATEFROMDATA'
    EXPORTING
      order_header_in           = ls_header
      business_object           = gc_bus_obj
    IMPORTING
      SALESDOCUMENT             = lv_vbeln
      RETURN                    = ls_return
    tables
      order_items_in            = lt_item
      order_partners            = lt_partner.
IF ls_return-type NE gc_msgty_error AND
     ls_return-type NE gc_msgty_abend.
No errors where found
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
ELSE.
There was an error or abend
    CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
ENDIF.

Error while updating Ship to Address on Sales Order form

hi ,
A user is trying to update the ship to address on a standard sales orders screen, this is pretty common and never caused any issues. However with one particular order the user gets the following error :
"You cannot update Ship To Location; the standard value rule set prevents override. "
This is an Oracle shipped message and not custom code. The message name is OE_SEC_UPDATE_VIOLATION whose text is : You cannot update &ATTRIBUTE; &REASON
Seems like REASON is the message : OE_SEC_SV_VIOLATION, whose text is
" the standard value rule set prevents override. "
This is a message shipped by Oracle Order entry. I am not able to locate this message since the oracle shipped files are not available to us and this is not in any database code(i searched the code)
Does anyone know when this message is thrown. It seems like some value set error but am not able to figure out where it is being set.
Any help in this will be appreciated.
Thanks

Did you check if any Processing rule is defined for Ship to location update :
Setup> Rules > Security > Processing constraint ?
Maybe this order matches condition that prevents this field from being updated.

SO created is Open or Close Sales Order

<b>Hi
I hav ot write a report for SD , In this for sales order I hav to check that - Is this Sales order is Open or Close order ,
Select-optoins are SALES ORDER , DATE , PLANT , St location .
if it is a close sales order , Then this report should pass a message to The MM consultant abt the stock ...
Regards ,
Narender .</b>

Hi,
Just to add, a sales order is open till such time all the line items are delivered completely with respect to the quantity ordered. This you can find in the VBUK ( Header status ) where the GBSTK field value is " C ".
Even if the goods are shipped or not, it does not influence the sales order completeness. Its only a delivery that happened or not influences the sales order status. Also you can take help from VA05 t.code which shows all the open sales orders by checking the " Open sales orders " button.
Hope it helps. Pl reward if useful.
Thanks & Regards
Sadhu Kishore

Creating ERP Sales Order from Siebel CRM

hi,
The sale order has been created in siebel crm. The same sale order had to simultaneously had to be created in our SAP R/3 server by using bapi. Is it possible.. Can you give me the steps..

Hi,
pass the values in the following structures
in ORDER_HEADER_IN
doc_type     : OR
sales_org   : 3110
distr_chan : 12
division      : 00
req_date_h : 01.07.2010
purch_date: 01.07.2010
in ORDER_ITEMS_IN
material : 1312(material)
plant : 3110
req_qty : 1
in ORDER_PARTNERS
partn_role : SP
partn_num : 100890(customer or vendor)
Regards,
Lokeswari.

What is the standard class used to create SALES ORDER in SAP CRM?

Hello Experts,
Can anyone suggest me what is the standard class used for creating sales order.
I have created sales order using the BAPI 'BAPI_SLSTRANSACT_CREATEMULTI' in my report program.
Now, I have to create sales order using standard classes and methods(my assignment).
Please suggest the suitable class.
Regards
DNR Varma

Hi Varma,
You can create crm documents like sales order using BOL interfaces.
You can check one example at the following thread:
Create OrderThro BOL
Check if it helps you a little more.
Kind regards,
Garcia

Knowledge Base Version Determination in Sales order in SAP CRM

Hello everyone
I am facing a problem where recently a Configurable Item's Variant Class was modified.
After this we created a Knowledge Base Object & Run Time Version in ECC.
This has correctly replicated to CRM & can be correctly simulated in the Product Workbench.
However when I place a Sales Order, the IPC is still picking up the older Knowledge Base Object.
So my question is how is the Sales Order Product configurator in CRM determines which Knowledge based object version to be used ?
Note: The latest KBO which the Order should ideally use was created on the same day after abt an hour of the older one.
Just in case the issue has anything to do with the dates.
Please help.
Vinit

Nilesh,
E-Commerce B2B design hinges on an assumption that the Contact Person (alias for the Logged in User) has multiple Sold-Tos and one should pick the Sold-To for creating the order. That is, the application knows the Contact Person already and forces you to pick a Sold-To first. There is no partner determination per-se. It is hard-wired logic. The following Business partners are set instead of being determined.
<li>Contact Person - SU01 user alias etc.
<li>Sold-To - Through Contact person to Sold-To relationship
Remember, in CRM for the E-Commerce B2B to work, the logging in user (SU01 user) must be Internet enabled - aka - must have a Contact Person alias and the Contact person must have at least one Sold-To. And that is what is used in the above logic.
The SAPGUI version gives ways to select and set the partners the way we want by way of the Partner determination procedure . However, these config changes are not automatically reflected in the Web world. You have to make a similar change in the sequence of determining the partner. Like, selecting the Ship-To first and then the Sold-To. That will be custom modification. :..-(
A solution from10,000 foot level:
Maintain a similar relationship for Contact Person to Ship-To in Business partner. Or more sleek way will be to develop a custom function module to get all the Ship-Tos of the Sold-Tos the Contact Person (SU01 user alias) is related to. - Custom ABAP + configuration work
Change the standard E-Commerce flow to show a list of Ship-Tos as determined in the previous step. - Custom Java + application configuration work
Determine the Sold-To automatically from Ship-To by whatever logic you use now. - ABAP + Java
Set these new partners in the E-Commerce application.- Java
Create orders and be happy
(Usually there are several ways to skin a cat and this is just one of them)
Easwar Ram
http://www.parxlns.com

Creating ERP Sales Order from CRM 7.0

Hi Experts,
We are implementing the scenario-Creating ERP Sales Order from CRM. My doubt is:-
Do we need to download the entire product data from ECC via middleware to implement this functionality?
Is it possible that we manually create few products in CRM with same heirarchy and category and avoid middleware data download?
My basic doubt is-what product information is passed to ECC from CRM when we create the ECC Sales Order? If only product id is passed, then we can avoid middleware data download for product from ECC to CRM.
Can anyone please provide me some pointers on this? What should be the approach-download product data from ECC to CRM or manually create product data in CRM?
Thanks and Regards,
Rohit

I´m trying to figure out the ERP Sales Order Scenario in CRM, i found the following link (sap.help) to customize the ERP sales Order in CRM, it´s a quickly guide supported by SALESPRO but in my case does not work, if somebody knows how to retrive the Order in IC i´ll appreciate.
Here a quick Guide -->
Prerequisites
You can directly create and change an ERP sales transaction in SAP CRM once you have carried out the following:
You are using SAP ERP for your Quotation and Order Management.
You are using SAP CRM.
You have assigned the relevant ERP sales transactions to a profile.
You do this in Customizing for CRM, by choosing Customer Relationship Management Transactions Settings for Sales Transactions Define Profile for ERP Sales Transactions .
You have defined an RFC destination.
You do this in Customizing for CRM, by choosing Customer Relationship Management CRM Middleware and Related Components Communication Setup Define RFC Destinations .
You have defined a business role by copying the standard business role SALESPRO to your own. You make this setting in Customizing for CRM, by choosing Customer Relationship Management Business Roles Define Business Role .
You have defined cross-system copy control of transaction types.
You do this in Customizing for CRM, by choosing Transactions Settings for ERP Transactions Maintained via CRM Cross-System Copy Control for Opportunities and ERP Transactions
I want to see the screens or video regarding with this scenario.
Regards,
Memo

One-time customer with ERP Sales Order

Hello experts,
I am working with ERP Sales Order on SAP CRM 7.0 Ehp3.
We have a requirement to start using 'one-time customer' process. I know there is a standard account groupd (CPD) on ECC side for this purporse.
We would like to enter a sales order for occasional customers, without saving the customer in the master data table.
I would like to have an occasional customer (example nº 1000 which should work like a CPD). I need to enter a sales order for this customer nº 1000, and once I enter nº 1000 on the BP number field, it should bring a Pop-up in order to enter the customer's information (address).
This is working when I create the order via VA01 on ECC side, but the pop-up is not shown when I try to create the order on CRM via erp sales order.
Any suggestions on how to make one-time customer work on ERP sales order? And how to make the pop-up work?
Thanks in advance!
Luis

Thanks a lot, Rene! I have just read this SAP note and confirmed your information.
Do you know of any workaround or development that could be done for this scenario using ERP sales order?
If not, I will suggest using transaction launcher and create this type of order for the one-time customer directly in VA01.
Once again, thanks for replying!
Luis.

Error while creating and opening a ERP sales order in SAP CRM

Similar Messages

Maybe you are looking for