Error while creating AW using DBMS_LOB with XML..

Hi All,
I am trying to create AW using DBMS_LOB package with XML,
while creating AW,i am facing the following error.find the code also below :
declare
xml_awcreate_clob clob;
xml_awcreate_st varchar2(4000);
begin
DBMS_LOB.CREATETEMPORARY(xml_awcreate_clob,TRUE);
dbms_lob.open(xml_awcreate_clob, DBMS_LOB.LOB_READWRITE);
dbms_lob.writeappend(xml_awcreate_clob, 48, '<?xml version = ''1.0'' encoding = ''UTF-8'' ?>');
dbms_lob.writeappend(xml_awcreate_clob, 43, '');
dbms_lob.writeappend(xml_awcreate_clob, 63, '<AWXML version = ''1.0'' timestamp = ''Mon Feb 11 13:29:11 2002'' >');
dbms_lob.writeappend(xml_awcreate_clob, 15, '<AWXML.content>');
dbms_lob.writeappend(xml_awcreate_clob, 25, ' <Create Id="Action41">');
dbms_lob.writeappend(xml_awcreate_clob, 19, ' <ActiveObject >');
dbms_lob.writeappend(xml_awcreate_clob, 163, ' <AW Name="NEW_XML_AW" LongName="NEW_XML_AW" ShortName="NEW_XML_AW" PluralName="NEW_XML_AW" Id="NEW_XML.AW"/>');
dbms_lob.writeappend(xml_awcreate_clob, 19, ' </ActiveObject>');
dbms_lob.writeappend(xml_awcreate_clob, 11, ' </Create>');
dbms_lob.writeappend(xml_awcreate_clob, 16, '</AWXML.content>');
dbms_lob.writeappend(xml_awcreate_clob, 8, '</AWXML>');
dbms_lob.close(xml_awcreate_clob);
xml_awcreate_st := sys.interactionExecute(xml_awcreate_clob);
end;
ORA-21560: argument 2 is null, invalid, or out of range
ORA-06512: at "SYS.DBMS_LOB", line 833
ORA-06512: at line 12
Any idea or thought on this would be appreciable.
Thanks in advance.
Anwar

Did you change any of the text in the lob write statements ?
I believe you get this error if you increase the number of characters without increasing the 1st argument which looks as though it represents the number of characters

Similar Messages

  • Whitespace is not allowed at this location. Error while running CP using RDF with XML

    Hi All,
    I am using RDF report with output type as XML. It have following parameters:
    1. Organization Name,
    2. Invoice No From
    3. Invoice No To
    4. Date From
    5. Date To
    I had developed an RTF and registered that in Oracle Applications. The output comes in Excel file.
    When I used to run report using Invoice Number From and Invoice Number To the report is giving normal excel output.
    But when I am running using parameters Date From and Date To then XML output is coming after viewing output in CP Output button.
    I downloaded that xml file. It is invalid as in the last of xml file it is showing following error message
    "Whitespace is not allowed at this location".
    Please let me know how can I resolve this problem.
    Thanks in advance..
    Regards
    Sandip

    my xml file looks like this....
    <!-- Generated by Oracle Reports version 10.1.2.3.0 -->
    <XX_ITEM_LOADING>
      <LIST_G_BLANKET_NUMBER>
        <G_BLANKET_NUMBER>
          <CUSTOMER>SPS PVT LTD</CUSTOMER>
          <INVOICE_NO>17356</INVOICE_NO>
          <INVOICE_DATE>20-JUL-13</INVOICE_DATE>
          <BUYER_REF>56780YP</BUYER_REF>
          <ITEM_DESCRIPTION>XXCSD</ITEM_DESCRIPTION>
          <NUM_OF_BEANS></NUM_OF_BEANS>
          <CARIRER></CARIRER>
          <SHIP_METHOD_CODE>UK568</SHIP_METHOD_CODE>
          <MODE_OF_TRANSPORT>ROAD</MODE_OF_TRANSPORT>
          <ASSEABLE_VALUE>1134534</ASSEABLE_VALUE>
          <QUANTITY>149</QUANTITY>
          <SOLD_TO>SPS PVT LTD</SOLD_TO>
          <TAN_NO></TAN_NO>
          <ST_REG_NO>943481</ST_REG_NO>
          <EC_CODE></EC_CODE>
          <TERMS>30 NET</TERMS>
          <CUST_PO_NUMBER></CUST_PO_NUMBER>
          <DESTINATION>LONDON</DESTINATION>
          <CP_DAYS>3</CP_DAYS>
        </G_BLANKET_NUMBER>
    XML page cannot be displayed
    Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
    Whitespace is not allowed at this location. Error processing resource 'file:///C:/Users/sys/Downloads/cp_output_date_range....
          <SOLD_TO>DKSP TECHNOLOGIES & ENGG(A DIV. OF PARROT SYSTEM LTD.)</SOLD_TO>
    _METHOD_CODE>

  • Error while creating the HTTP client with destination GB_DPSRetrieve

    Hi All,
    It is an interface R/3 -->XI --> HTTP ( proxy to HTTP ).
    Please find the error log below and throw some light why the HTTP adapter is getting error -
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SAP="http://sap.com/xi/XI/Message/30">
    - <SOAP:Header>
    - <SAP:Main xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" versionMajor="003" versionMinor="000" SOAP:mustUnderstand="1" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7">
      <SAP:MessageClass>SystemError</SAP:MessageClass>
      <SAP:ProcessingMode>synchronous</SAP:ProcessingMode>
      <SAP:MessageId>DC98499F-7E42-74F1-A41F-0017A4107EE6</SAP:MessageId>
      <SAP:RefToMessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:RefToMessageId>
      <SAP:TimeSent>2007-11-21T15:51:30Z</SAP:TimeSent>
    - <SAP:Sender>
      <SAP:Party agency="http://sap.com/xi/XI" scheme="XIParty">GovernmentGateway</SAP:Party>
      <SAP:Service>GGMailbox</SAP:Service>
      <SAP:Interface namespace="http://sap.com/xi/E-FILING_GB/2005">DPSretrieve</SAP:Interface>
      </SAP:Sender>
    - <SAP:Receiver>
      <SAP:Party agency="" scheme="" />
      <SAP:Service>SAP_DEV_ERP2005</SAP:Service>
      <SAP:Interface namespace="http://sap.com/xi/HR">HR_GB_EFI_DPSretrieve</SAP:Interface>
      </SAP:Receiver>
      <SAP:Interface namespace="http://sap.com/xi/E-FILING_GB/2005">DPSretrieve</SAP:Interface>
      </SAP:Main>
    - <SAP:ReliableMessaging xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:QualityOfService>BestEffort</SAP:QualityOfService>
      </SAP:ReliableMessaging>
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIAdapter</SAP:Category>
      <SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_CLIENT_DEST</SAP:Code>
      <SAP:P1>GB_DPSRetrieve</SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error while creating the HTTP client with destination GB_DPSRetrieve</SAP:Stack>
      <SAP:Retry>N</SAP:Retry>
      </SAP:Error>
    - <SAP:HopList xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
    - <SAP:Hop timeStamp="2007-11-21T15:51:30Z" wasRead="false">
      <SAP:Engine type="BS">SAP_DEV_ERP2005</SAP:Engine>
      <SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
      <SAP:MessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:MessageId>
      <SAP:Info>3.0</SAP:Info>
      </SAP:Hop>
    - <SAP:Hop timeStamp="2007-11-21T15:51:30Z" wasRead="false">
      <SAP:Engine type="IS">is.00.lbsth-tb1ci</SAP:Engine>
      <SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
      <SAP:MessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:MessageId>
      <SAP:Info>3.0</SAP:Info>
      </SAP:Hop>
    - <SAP:Hop timeStamp="2007-11-21T15:51:30Z" wasRead="false">
      <SAP:Engine type="IS" />
      <SAP:Adapter namespace="http://sap.com/xi/XI/System">HTTP</SAP:Adapter>
      <SAP:MessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:MessageId>
      <SAP:Info />
      </SAP:Hop>
      </SAP:HopList>
    - <SAP:RunTime xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
      <SAP:Date>20071121</SAP:Date>
      <SAP:Time>155130</SAP:Time>
      <SAP:Host>lbsth-tb1ci</SAP:Host>
      <SAP:SystemId>XIS</SAP:SystemId>
      <SAP:SystemNr>00</SAP:SystemNr>
      <SAP:OS>Windows NT</SAP:OS>
      <SAP:DB>ORACLE</SAP:DB>
      <SAP:Language />
      <SAP:ProcStatus>023</SAP:ProcStatus>
      <SAP:AdapterStatus>000</SAP:AdapterStatus>
      <SAP:User>PISUPER</SAP:User>
      <SAP:TraceLevel>1</SAP:TraceLevel>
      <SAP:LogSeqNbr>000</SAP:LogSeqNbr>
      <SAP:RetryLogSeqNbr>000</SAP:RetryLogSeqNbr>
      <SAP:PipelineIdInternal>SAP_CENTRAL</SAP:PipelineIdInternal>
      <SAP:PipelineIdExternal>CENTRAL</SAP:PipelineIdExternal>
      <SAP:PipelineElementId>60C3C53B4BB7B62DE10000000A1148F5</SAP:PipelineElementId>
      <SAP:PipelineService>PLSRV_CALL_ADAPTER</SAP:PipelineService>
      <SAP:QIdInternal />
      <SAP:CommitActor>X</SAP:CommitActor>
      <SAP:SplitNumber>0</SAP:SplitNumber>
      <SAP:NumberOfRetries>0</SAP:NumberOfRetries>
      <SAP:NumberOfManualRetries>0</SAP:NumberOfManualRetries>
      <SAP:TypeOfEngine client="200">CENTRAL</SAP:TypeOfEngine>
      <SAP:PlsrvExceptionCode />
      <SAP:EOReferenceRuntime type="TID" />
      <SAP:EOReferenceInbound type="TID" />
      <SAP:EOReferenceOutbound type="TID" />
      <SAP:MessageSizePayload>0</SAP:MessageSizePayload>
      <SAP:MessageSizeTotal>2918</SAP:MessageSizeTotal>
      <SAP:PayloadSizeRequest>0</SAP:PayloadSizeRequest>
      <SAP:PayloadSizeRequestMap>0</SAP:PayloadSizeRequestMap>
      <SAP:PayloadSizeResponse>0</SAP:PayloadSizeResponse>
      <SAP:PayloadSizeResponseMap>0</SAP:PayloadSizeResponseMap>
      <SAP:Reorganization>INI</SAP:Reorganization>
      <SAP:AdapterInbound>PLAINHTTP</SAP:AdapterInbound>
      <SAP:AdapterOutbound>IENGINE</SAP:AdapterOutbound>
      <SAP:InterfaceAction>INIT</SAP:InterfaceAction>
      <SAP:RandomNumber>15</SAP:RandomNumber>
      <SAP:AckStatus>000</SAP:AckStatus>
      <SAP:SkipReceiverDetermination />
      <SAP:Receiver_Agreement_GUID>24422A5646443F8E9D975D57A3EE8162</SAP:Receiver_Agreement_GUID>
      </SAP:RunTime>
    - <SAP:PerformanceHeader xmlns:SAP="http://sap.com/xi/XI/Message/30">
    - <SAP:RunTimeItem>
      <SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
      <SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.5</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
      <SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
      <SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
      <SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
      <SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
      <SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
      <SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
      <SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
      <SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
      <SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_MAPPING_REQUEST</SAP:Name>
      <SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_MAPPING_REQUEST</SAP:Name>
      <SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_OUTBOUND_BINDING</SAP:Name>
      <SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_OUTBOUND_BINDING</SAP:Name>
      <SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_CALL_ADAPTER</SAP:Name>
      <SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
      <SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.656</SAP:Timestamp>
      </SAP:RunTimeItem>
      </SAP:PerformanceHeader>
    - <SAP:Diagnostic xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:TraceLevel>Information</SAP:TraceLevel>
      <SAP:Logging>Off</SAP:Logging>
      </SAP:Diagnostic>
    - <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
      <Trace level="1" type="T">SystemError message generated. Guid: DC98499F7E4274F1A41F0017A4107EE6</Trace>
      <Trace level="1" type="T">Error during execution of message : DC98499CA1EABEF1B4DD00110A63BF06</Trace>
      <Trace level="1" type="T">ApplicationMessage was (=RefToMsgId): DC98499CA1EABEF1B4DD00110A63BF06</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
    - <!--  ************************************
      -->
      </SAP:Trace>
      </SOAP:Header>
    - <SOAP:Body>
      <SAP:Manifest xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-manifest-5CABE13F5C59AB7FE10000000A1551F7" />
      </SOAP:Body>
      </SOAP:Envelope>
    Regards,
    Kishore

    Hi,
    In the HTTP Receiver what is the Addressing Type used ? (URL Address or HTTP Destination).
    If its URL Addressing Type, check if right Authentication Type is used with valid values and for HTTP Addressing Type check this HTTP Client Create Error, it could be helpful.
    Also check if the Target system can be reached from the XI server to validate the configuration parameters.
    Regards,
    S.Santhosh Kumar

  • Error while creating the sales order with billing reference

    hi alll
    i am getting error while creating the sales order with billing reference.The line items are coming in grey.I am not able to change the items as well as the quantity field.Can u guide me
    cheers
    shalsa007........

    Dear SAP SD 007
    I can confidently tell that an enhancement or an user exit has been applied in your scenario
    You have to check that
    Normally when creating a sales order with respect or referring billing documents the qty will be in editable mode and it is standard problem
    Your people has solved the standard problem by enhancement
    Usually OR--LF-PGI----F2 (SAY THE QTY IS 25 UNITS)
    Now you are creating returns order with reference to F2 in the return order type Re there is a standard issue that user can edit the qty to 30 from the original 25
    To solve this only your people have used userexit
    Line items and qty greyed out means definately there is some enhancement or user exit applied
    You have to check that
    Regards
    Raja

  • Error while creating the HTTP client with destination

    Hi ,
    I am getting this error while connecting to https location on receiver channel . The below error i am getting in SXMB_moni
    Error while creating the HTTP client with destination
    The receiver party is doing some security setting on there end and for that purpose we have provided the external IP address to them , after that we are getting the above error.
    We have already installed the client certificate on our staging server , and have done the correct setting in SM59 and channel.

    Check few things..
    1) I believe you use specify destination for the addressing type field in the comm channel. If so make sure you entered valid target URL address in the SM59 of type http destination.
    2) Check the validitity of the certificate. You can import the certificate both in java and abap stack.
    3) Make sure certificate is installed as expected.
    4) Send the request and talk to the target system and check what error information they get in their log related to ssl.

  • Error while creating stock using tcode: MB1C

    Error while creating stock using tcode: MB1C
    The Error is: Check table T004F:entry G006 does not exist

    Hi ,
    Please check the FSV (field status variant) for your company code in OBY6 .
    then go to transaction code OB14 --> enter the FSV --> Check if field status group G006(Material account) is maintained there or not.
    if not please maintain it.
    Thanks & Regards
    Anshu

  • Getting error while creating subsite using custom template in sharepoint2013

    Hi,
    I am getting the following error while creating subsite using custom template in sharpoint2013. even publish features are enabled.
    Please suggest me on this.
    Thanks in advance.

    You need to enable the PerformancePoint Service Site Collection Features(PPSMonDatasourceCtype)
    on the target site collection. go to site action > site settings> site collections features > and enable it and now try again.
    Similar case: http://imughal.wordpress.com/2012/09/20/dependency-feature-ppsmondatasourcectype-id-05891451-f0c4-4d4e-81b1-0dabd840bad4-for-feature-bicenterdataconnections-id-3d8210e9-1e89-4f12-98ef-643995339ed4-is-not-activated-at-this-scop/
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • Error while creating SR using CS_ServiceRequest_PUB.Create_ServiceRequest

    Hi All,
    I am getting below error while creating an SR from the backend using API 'CS_ServiceRequest_PUB'.
    Error:
    API Programming Error (CS_ServiceRequest_PUB.Create_ServiceRequest): An error occurred when validating the descriptive flexfield.
    Additional information:Program error: Please inform your support representative that:
    FLEXFIELDS SERVER-SIDE VALIDATION package reports error:
    validate_desccols() exception: ORA-20005: DVLB.get_default_context() failed. SQLERRM: ORA-01403: no data found
    ORA-06512: at "APPS.FND_FLEX_DESCVAL", line 931
    ORA-01403: no data found
    Error: ORA-06502: PL/SQL: numeric or value error: character string buffer too small
    I have intialised the context as below while running the stand alone procedure in SQL Developer.
    Fnd_Global.apps_initialize (user_id => 1368347,
    resp_id => 21739
    resp_appl_id => 514 );
    We are on 11.5.10.2 and database version is 9i.
    Can you please help??
    TIA,
    S

    Hi Kesava,
    I notice that in the package you used the application user_name=CHUNDUK calls the API pa_project_pub.create_project.
    I wonder if you used chunduk as database user to execute the package Or you used APPS to execute the package?
    The APi document states that it is a requirement to create a db username as the same name with the application username.
    I have been running the problem to execute API 's delete project and try to figure what could be my problem.
    TIA

  • Getting Error while creating Document object  after  parsing XML String

    Hi All,
    I have been trying to parse an XML string using the StringReader and InputSource interface but when I am trying to create Document Object using Parse() method getting error like
    [Fatal Error] :2:6: The processing instruction target matching "[xX][mM][lL]" is not allowed.
    seorg.xml.sax.SAXParseException: The processing instruction target matching "[xX][mM][lL]" is not allowed.
    Please find the code below which i have been experimenting with:
    import java.io.BufferedReader;
    import java.io.FileNotFoundException;
    import java.io.FileReader;
    import java.io.IOException;
    import java.io.StringReader;
    import java.util.List;
    import java.util.*;
    import javax.xml.parsers.DocumentBuilder;
    import javax.xml.parsers.DocumentBuilderFactory;
    import javax.xml.parsers.ParserConfigurationException;
    import org.w3c.dom.Document;
    import org.w3c.dom.Element;
    import org.w3c.dom.Node;
    import org.w3c.dom.NodeList;
    import org.xml.sax.InputSource;
    import org.xml.sax.SAXException;
    import java.io.*;
    public class TestMain {
         public static void main(String[] args) {
              String file = "";
              file = loadFileContent("C:\\Test.xml");
              System.out.println("contents >> "+file);
              parseQuickLinksFileContent(file);
    public static void parseQuickLinksFileContent(String fileContents) {
    PWMQuickLinksModelVO objPWMQuickLinksModelVO = new PWMQuickLinksModelVO();
         try {
    DocumentBuilderFactory factory =           DocumentBuilderFactory.newInstance();
         DocumentBuilder builder = factory.newDocumentBuilder();
         StringReader objRd = new StringReader(fileContents);
         InputSource objIs = new InputSource(objRd);
         Document document = builder.parse(objIs); // HERE I am getting Error.
         System.out.println(document.toString());
    What is happening while I am using builder.parse() method ???
    Thanks,
    Rajendra.

    Getting following error
    [Fatal Error] :2:6: The processing instruction target matching "[xX][mM][lL]" is not allowed.
    seorg.xml.sax.SAXParseException: The processing instruction target matching "[xX][mM][lL]" is not allowed.

  • Error while creating Resource using GDS

    Hi
    Iam trying to create Resource using GDS and it is throwing me error
    clresource: (C189917) VALIDATE on resource egateq00-haegate_reg-res, resource group egateq00-rg, exited with non-zero exit status.
    clresource: (C720144) Validation of resource egateq00-haegate_reg-res in resource group egateq00-rg on node uhegateq02 failed.
    clresource: (C891200) Failed to create resource "egateq00-haegate_reg-res".
    This is the command I executed
    rclresource create -g egateq00-rg -t SUNW.gds
    -p Scalable=false -p Start_timeout=120 -p Stop_timeout=120 -p Probe_timeout=30
    -p Port_list="23001/tcp" -p Start_command="/egateq00/scripts/reg_START.sh" -p Stop_command="/egateq00/scripts/reg_STOP.sh"
    -p Probe_command="/egateq00/scripts/reg_PROBE.sh" -p Child_mon_level=1 -p Network_resources_used=egateq00-lh-res -p Failover_enabled=FALSE
    -p Stop_signal=15 egateq00-haegate_reg-res
    The log under /var/cluster/logs/DS says following
    07/01/2008 17:56:43 uhegateq02 START-INFO> scha_resource_open failed [14]. Keeping the old Log_level value
    07/01/2008 17:56:43 uhegateq02 START-ERROR> Cannot access the start command </egateq00/scripts/reg_START.sh> : <No such file or directory>
    07/01/2008 18:13:23 uhegateq02 START-INFO> scha_resource_open failed [14]. Keeping the old Log_level value
    07/01/2008 18:13:23 uhegateq02 START-ERROR> Cannot access the start command </egateq00/scripts/reg_START.sh> : <No such file or directory>
    However, I can open these scripts and run it from anywhere. I also tested these scripts and they all work fine. They are all set to chmod 777 , so everyone should have execute permission
    Iam not returning any return value from these Start and Stop script , is that the why it is failing
    thanks

    Hi
    I disabled the PMF as described on the http://blogs.sun.com/TF/entry/disabling_pmf_action_script_with. This is what I did
    1>Added following line in the top of my Start script
    while getopts 'R:G:' opt
    do
    case "${opt}" in
    R) RESOURCE=${OPTARG};;
    G) RESOURCEGROUP=${OPTARG};;
    esac
    done
    sleep 60 &
    /usr/cluster/bin/pmfadm -s ${RESOURCEGROUP},${RESOURCE},0.svc
    2>While creating the resource , I used property for Start_command="/egateq00/scripts/reg_START.sh -R %RS_NAME -G %RG_NAME"
    Now , after doing this , My RG is not getting lost. Also , in the message file I do not see the errors of "Start script failed to stay UP"
    However, My Application is not started either.
    This is what the message file says
    Jul 3 16:43:32 uhegateq01 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <gds_validate> completed successfully for resource <egateq00-haegat
    e-reg-res>, resource group <egateq00-rg>, node <uhegateq01>, time used: 0% of timeout <300 seconds>
    Jul 3 16:43:32 uhegateq01 Cluster.CCR: [ID 973933 daemon.notice] resource egateq00-haegate-reg-res added.
    Jul 3 16:43:32 uhegateq01 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <gds_svc_start> for resource <egateq00-haegate-reg-res>,
    resource group <egateq00-rg>, node <uhegateq01>, timeout <120> seconds
    Jul 3 16:43:32 uhegateq01 Cluster.RGM.rgmd: [ID 252072 daemon.notice] 50 fe_rpc_command: cmd_type(enum):<1>:cmd=</opt/SUNWscgds/bin/gds_svc_star
    t>:tag=<egateq00-rg.egateq00-haegate-reg-res.0>: Calling security_clnt_connect(..., host=<uhegateq01>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, .
    Jul 3 16:43:35 uhegateq01 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <gds_svc_start> completed successfully for resource <egateq00-haega
    te-reg-res>, resource group <egateq00-rg>, node <uhegateq01>, time used: 2% of timeout <120 seconds>
    Jul 3 16:43:35 uhegateq01 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <gds_monitor_start> for resource <egateq00-haegate-reg-re
    s>, resource group <egateq00-rg>, node <uhegateq01>, timeout <300> seconds
    Jul 3 16:43:35 uhegateq01 Cluster.RGM.rgmd: [ID 252072 daemon.notice] 50 fe_rpc_command: cmd_type(enum):<1>:cmd=</opt/SUNWscgds/bin/gds_monitor_
    start>:tag=<egateq00-rg.egateq00-haegate-reg-res.7>: Calling security_clnt_connect(..., host=<uhegateq01>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1
    , ...)Jul 3 16:43:35 uhegateq01 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <gds_monitor_start> completed successfully for resource <egateq00-h
    aegate-reg-res>, resource group <egateq00-rg>, node <uhegateq01>, time used: 0% of timeout <300 seconds>
    4>Also , in the /var/cluster/logs/DS , I see the Start script started succesfully
    07/03/2008 16:43:32 uhegateq01 START-INFO> Start succeeded. [egateq00/scripts/reg_START.sh -R egateq00-haegate-reg-res -G egateq00-rg]
    5>Also , in the /var/cluster/logs/DS , I see the Probe script returning 0 , but this is wierd because it should return Non zero number. When I run the Probe script from the command line , it is returning me non zero value when the application is down
    07/03/2008 16:43:35 uhegateq01 PROBE-INFO> The GDS monitor (gds_probe) has been started
    07/03/2008 16:44:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
    07/03/2008 16:44:35 uhegateq01 PROBE-INFO> The probe result is 0
    07/03/2008 16:45:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
    07/03/2008 16:45:35 uhegateq01 PROBE-INFO> The probe result is 0
    07/03/2008 16:46:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
    07/03/2008 16:46:35 uhegateq01 PROBE-INFO> The probe result is 0
    07/03/2008 16:47:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
    07/03/2008 16:47:35 uhegateq01 PROBE-INFO> The probe result is 0
    07/03/2008 16:48:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
    07/03/2008 16:48:35 uhegateq01 PROBE-INFO> The probe result is 0
    07/03/2008 16:49:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
    07/03/2008 16:49:35 uhegateq01 PROBE-INFO> The probe result is 0
    07/03/2008 16:50:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
    07/03/2008 16:50:35 uhegateq01 PROBE-INFO> The probe result is 0
    07/03/2008 16:51:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
    07/03/2008 16:51:35 uhegateq01 PROBE-INFO> The probe result is 0
    07/03/2008 16:52:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
    07/03/2008 16:52:35 uhegateq01 PROBE-INFO> The probe result is 0
    07/03/2008 16:53:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
    07/03/2008 16:53:35 uhegateq01 PROBE-INFO> The probe result is 0
    07/03/2008 16:54:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
    07/03/2008 16:54:35 uhegateq01 PROBE-INFO> The probe result is 0
    07/03/2008 16:55:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
    07/03/2008 16:55:35 uhegateq01 PROBE-INFO> The probe result is 0
    07/03/2008 16:56:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
    07/03/2008 16:56:35 uhegateq01 PROBE-INFO> The probe result is 0

  • Error while creating Routing using LSMW

    Hi Guys ,
    I am trying to create LSMW using Direct Input Method .
    My structures are ::
    RC271_DS   Work center structure for direct input (for datasets)
    RC27M_DS   Material master view DIRECT INPUT routing for datasets
    PLKO_DI_DS Header structure for direct input (for datasets)
    PLPO_DI_DS Routing/item structure for direct input (for datasets.
    I getting correct data from multiple flat files .
    It's converting the data also .
    But while executing start direct input method i am getting the followig error ....
    You cannot edit the task list object with activity type
    Please let me know problem guys .
    Regards,
    Raj

    Hi Naveen,
    It means you have to assign  the task list type to  material type ZPRD. Then it will carry its job:
    The path is:
    Go To-> SPRO-> IMG Activity-> Production-> Basic Data-> Routing-> General Data---> Define Material Type Assignments. T-Code: OP50
    I hope it will work.
    Regards,
    Madhu.G

  • Error while creating BOM using BAPI (urgent)

    Hi all,
    Thanks for ur help. i am getting some error while creting a BOM using that BAPI
    BAPI_MATERIAL_BOM_GROUP_CREATE.
    errors are
    1) Error/warning when checking the structure of the BOM group with ID =
    2)Alternative does not exist for material assignment to material BAPIBOMFG1
    is it mandatory to pass the bom group id to this bapi?
    In bomgroup structure , i am not passing anything to BOM_GROUP field.
    is it mandatory to pass this data? i am giving my coding below.plz suggest , where i am making mistake. it is urgent.
    regards
    pabitra
    report z_bom_create
    line-size 132
    line-count 65
    no standard page heading.
    *-- DATA DECLARATION--
    include <icon> .
    *---Tables
    tables : s076, t100, marc .
    *---Types
    types : begin of t_upload, " Upload file data
    col1(18),
    col2(10),
    col3(30),
    col4(12),
    col5(50),
    end of t_upload,
    begin of t_split,
    location like stpu-ebort,
    end of t_split.
    data:begin of i_return occurs 10.
    include structure bapiret2.
    data:end of i_return.
    types:begin of t_item."occurs 10.
    include structure BAPI1080_ITM_C.
    types:end of t_item.
    types:begin of t_subitem." occurs 10.
    include structure BAPI1080_SUI_C.
    types:end of t_subitem.
    types:begin of t_header." occurs 10.
    include structure BAPI1080_MBM_C.
    types:end of t_header.
    types:begin of t_bomgroup." occurs 10.
    include structure BAPI1080_BGR_C.
    types:end of t_bomgroup.
    types:begin of t_variant." occurs 10.
    include structure BAPI1080_BOM_C.
    types:end of t_variant.
    *--- Tables
    data: i_upload type standard table of t_upload, " to hold data
    i_upload1 type standard table of t_upload,
    i_split type standard table of t_split,
    i_item type standard table of t_item,
    i_subitem type standard table of t_subitem,
    i_header type standard table of t_header,
    i_bomgroup type standard table of t_bomgroup,
    i_variant type standard table of t_variant.
    data: wa_upload type t_upload, " to hold file data,
    wa_upload1 type t_upload, " to hold plan data,
    wa_split type t_split,
    wa_item type t_item,
    wa_subitem type t_subitem,
    wa_header type t_header,
    wa_bomgroup type t_bomgroup,
    wa_variant type t_variant.
    data:v_matnr like mara-matnr,
    v_start like sy-index,
    v_count(3) type c.
    *--Constants
    data: c_dot type c value '.',
    c_x type c value 'X',
    c_comma type c value ','.
    -------Selection Screen Design -
    *Selection screen for input of upload file address
    selection-screen skip 2.
    selection-screen begin of block blk1 with frame.
    parameters : p_file like rlgrap-filename obligatory .
    parameters : p_matnr like mara-matnr obligatory,
    p_werks like marc-werks obligatory memory id wrk,
    p_stlan like afko-stlan obligatory default '1' .
    selection-screen end of block blk1.
    ---AT SELECTION SCREEN -
    at selection-screen on value-request for p_file.
    *--For popup to select file.
    perform f_give_help.
    at selection-screen on p_matnr.
    perform f_check_matnr.
    -----START OF SELECTION -
    *--Data upload using WS_Upload.
    perform f_get_data.
    perform f_get_bom_data.
    perform f_get_bom_data1.
    perform f_call_bapi.
    *& Form f_give_help
    text
    --> p1 text
    <-- p2 text
    FORM f_give_help.
    call function 'WS_FILENAME_GET'
    exporting
    mask = ',.,..'
    mode = 'O'
    importing
    filename = p_file
    exceptions
    inv_winsys = 1
    no_batch = 2
    selection_cancel = 3
    selection_error = 4
    others = 5.
    if sy-subrc <> 0 and not sy-msgty is initial.
    message id sy-msgid type sy-msgty number sy-msgno
    with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    endif.
    ENDFORM. " f_give_help
    *& Form f_check_matnr
    text
    --> p1 text
    <-- p2 text
    FORM f_check_matnr.
    CALL FUNCTION 'BAPI_MAT_BOM_EXISTENCE_CHECK'
    EXPORTING
    MATERIAL = p_matnr
    PLANT = p_werks
    BOMUSAGE = '1'
    VALID_FROM_DATE =
    VALID_TO_DATE =
    TABLES
    RETURN = i_return.
    ENDFORM. " f_check_matnr
    *& Form f_get_data
    text
    --> p1 text
    <-- p2 text
    FORM f_get_data.
    call function 'WS_UPLOAD'
    exporting
    CODEPAGE = ' '
    filename = p_file
    filetype = 'DAT'
    tables
    data_tab = i_upload
    exceptions
    conversion_error = 1
    file_open_error = 2
    file_read_error = 3
    invalid_type = 4
    no_batch = 5
    unknown_error = 6
    invalid_table_width = 7
    gui_refuse_filetransfer = 8
    customer_error = 9
    others = 10
    if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
    with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    endif.
    ENDFORM. " f_get_data
    *& Form f_get_bom_data
    text
    --> p1 text
    <-- p2 text
    FORM f_get_bom_data.
    delete i_upload where col1 is initial.
    delete i_upload where col1 cs 'ITEM'.
    read table i_upload into wa_upload with key col1 = 'FINISHED GOOD:'.
    if sy-subrc = 0.
    v_matnr = wa_upload-col2.
    if v_matnr <> p_matnr.
    message e001(zl) with p_matnr.
    endif.
    else.
    message e000(zl).
    endif.
    ENDFORM. " f_get_bom_data
    *& Form f_get_bom_data1
    text
    --> p1 text
    <-- p2 text
    FORM f_get_bom_data1.
    loop at i_upload into wa_upload where col1 CS 'FINISHED GOOD'.
    v_start = sy-tabix + 1.
    loop at i_upload into wa_upload1 from v_start .
    if wa_upload1-col1 cs 'FINISHED GOOD'.
    exit.
    else.
    perform f_split_upload_data.
    endif.
    endloop.
    endloop.
    ENDFORM. " f_get_bom_data1
    *& Form f_split_upload_data
    text
    --> p1 text
    <-- p2 text
    FORM f_split_upload_data.
    if not wa_upload1-col5 is initial.
    if wa_upload1-col5 cs c_comma.
    split wa_upload1-col5 at c_comma into table i_split.
    loop at i_split into wa_split.
    v_count = v_count + 1.
    endloop.
    if wa_upload1-col4 <> v_count.
    wa_upload1-col4 = v_count.
    endif.
    clear wa_upload1-col5.
    clear wa_split.
    loop at i_split into wa_split.
    wa_upload1-col5 = wa_split-location.
    append wa_upload1 to i_upload1.
    endloop.
    else.
    append wa_upload1 to i_upload1.
    endif.
    else.
    append wa_upload1 to i_upload1.
    endif.
    ENDFORM. " f_split_upload_data
    *& Form f_call_bapi
    text
    --> p1 text
    <-- p2 text
    FORM f_call_bapi.
    clear wa_upload1.
    wa_header-material = p_matnr.
    wa_header-plant = p_werks.
    wa_header-bom_usage = p_stlan.
    append wa_header to i_header.
    wa_bomgroup-bom_usage = p_stlan.
    wa_bomgroup-created_in_plant = p_werks.
    append wa_bomgroup to i_bomgroup.
    wa_variant-alternative_bom = 1.
    wa_variant-base_qty = 1.
    wa_variant-valid_from_date = sy-datum.
    append wa_variant to i_variant.
    loop at i_upload1 into wa_upload1.
    wa_item-item_no = wa_upload1-col1.
    wa_item-item_cat = wa_upload1-col2.
    wa_item-component = wa_upload1-col3.
    wa_item-comp_qty = wa_upload1-col4.
    append wa_item to i_item.
    wa_subitem-subitem_qty = '1'.
    wa_subitem-installation_point = wa_upload1-col5.
    append wa_subitem to i_subitem.
    endloop.
    CALL FUNCTION 'BAPI_MATERIAL_BOM_GROUP_CREATE'
    EXPORTING
    TESTRUN = ' '
    ALL_ERROR = ' '
    TABLES
    BOMGROUP = i_bomgroup
    VARIANTS = i_variant
    ITEMS = i_item
    SUBITEMS = i_subitem
    MATERIALRELATIONS = i_header
    ITEMASSIGNMENTS =
    SUBITEMASSIGNMENTS =
    TEXTS =
    RETURN = i_return.
    if i_return[] is initial.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
    *write: /'BOM created:', stpo-stlnr.
    else.
    *if not i_return[] is initial.
    loop at i_return.
    IF i_return-TYPE = 'E'.
    errmsg-type = i_return-type.
    errmsg-line = i_return-message.
    append errmsg.
    ULINE /1(108).
    write:/ icon_led_RED as icon, i_return-MESSAGE.
    ULINE /1(108).
    ENDIF.
    IF i_return-TYPE = 'W'.
    errmsg-type = i_return-type.
    errmsg-line = i_return-message.
    append errmsg.
    ULINE /1(108).
    write:/ icon_led_YELLOW as icon, i_return-MESSAGE.
    ULINE /1(108).
    ENDIF.
    ENDLOOP.
    *write: / i_return-id, i_return-number, i_return-message(80).
    *endloop.
    *write: /'Error'.
    endif.
    ENDFORM. " f_call_bapi

    Hi shashi,
    Thanks for ur help.i tried after passing the group but it is giving same error.
    i am getting the error
    "Error/warning when checking the structure of the BOM group with ID= test"
    i am gettig the above error when i put bomgroup-bom_group_identification = 'TEST'.
    whatever i am putting in this field, the same error is comming having different value.
    if i put--- bomgroup-bom_group_identification = ' '. then i will get error
    "Error/warning when checking the structure of the BOM group with ID=
    if i omit that field, then also , i am getting same error.
    plz suggest what r the fields i need to pass for BOMGROUP structure for that bapi?
    regards
    pabitra

  • Error While creating User using userservcenter Webservice

    Hi All,
    I have generated the java client stub from the um_workflowSaveCreateProfile.wsdl file successfully and I have developed one client code to call the web service to create user in Oracle Internet Directory.
    I am invoking one workflow for creation of the user which accepts four attributes (sn, cn, uid, userPassword),it is working fine when sn, cn, uid attributes are mandatory only, but if I make userPassord as mandatory, it is showing me error : Not all of the required parameters for this operation were specified.
    I am using the below client Code to call the service:
    package com.example;
    import java.util.Properties;
    import org.apache.axis.AxisFault;
    import com.oblix.CreateUser.*;
    public class CreateUserClient {
    public static void main(String Args[]) throws AxisFault{
    try{
    OblixIDXML_um_workflowSaveCreateProfile_ServiceLocator loc = new OblixIDXML_um_workflowSaveCreateProfile_ServiceLocator();
    OblixIDXMLPortType port = loc.getOblixIDXML_um_workflowSaveCreateProfile_Port();
    Authentication myauth = new Authentication();
    myauth.setLogin("orcladmin");
    myauth.setPassword("1111Aaaa");
    Request myrequest = new Request();
    myrequest.setFunction("workflowSaveCreateProfile");
    myrequest.setApplication("userservcenter");
    myrequest.setVersion("NPWSDL1.0");
    RequestParams myparams = new RequestParams();
    myparams.setObDomainName("dc=ad,dc=company,dc=com");
    //myparams.setObWorkflowName("obworkflowid=wfqs20090206T1424241321438,obcontainerId=workflowDefinitions,o=Oblix,dc=ad,dc=company,dc=com");
    myparams.setObWorkflowName("obworkflowid=wfqs20090206T170318571544,obcontainerId=workflowDefinitions,o=Oblix,dc=ad,dc=company,dc=com");
    java.math.BigInteger myint2 = new java.math.BigInteger("4");
    myparams.setNoOfFields(myint2);
    AttributeParams attributeParams = new AttributeParams();
    GenericAttribute []genericAttribute = new GenericAttribute[10];
    GenericAttribute mygenericattr = new GenericAttribute();
    mygenericattr.setAttrName("cn");
    mygenericattr.setAttrOperation("ADD");
    String[] cn = {"Akshay"};
    mygenericattr.setAttrNewValue(cn);
    genericAttribute[0] = mygenericattr;
    GenericAttribute mygenericattr1 = new GenericAttribute();
    mygenericattr1.setAttrName("sn");
    mygenericattr1.setAttrOperation("ADD");
    String[] sn = {"koul"};
    mygenericattr1.setAttrNewValue(sn);
    genericAttribute[1] = mygenericattr1;
    GenericAttribute mygenericattr3 = new GenericAttribute();
    mygenericattr3.setAttrName("uid");
    mygenericattr3.setAttrOperation("ADD");
    String[] uid = {"akshay_koul"};
    mygenericattr3.setAttrNewValue(uid);
    genericAttribute[2] = mygenericattr3;
    PasswordAttribute []pwdatrarr= new PasswordAttribute[1];
    PasswordAttribute pwdatr= new PasswordAttribute();
    pwdatr.setAttrName("userPassword");
    pwdatr.setAttrOperation("ADD");
    pwdatr.setAttrNewValue("abcd1234");
    pwdatr.setAttrConfirmValue("abcd1234");
    pwdatrarr[0] = pwdatr;
    System.out.println("the pwd is"+pwdatrarr.toString());
    attributeParams.setGenericAttribute(genericAttribute);
    attributeParams.setPasswordAttribute(pwdatrarr);
    myparams.setAttributeParams(attributeParams);
    myrequest.setParams(myparams);
    Oblix output = port.oblixIDXML_um_workflowSaveCreateProfile(myauth, myrequest);
    System.out.println("result of the request\n");
    System.out.println();
    //System.out.println("test:"+output.getObError().getObStatus());
    // System.out.println("test1:"+output.getObError().getObRequestInfo());
    System.out.println("test2:"+output.getObError().getObTextMessage()[0].toString());
    System.out.println("test2:"+output.getObError().getObTextMessage()[0]);
    System.out.println("test3:"+output.getObError().getObTextMessage(0));
    System.out.println("status is " + output.getObStatus());
    }catch(Exception e){
    System.out.println("the exception is:"+e.getMessage());
    e.printStackTrace();
    Please suggest me where i am wrong !!!
    Thanks in Advance
    Akshay

    Hi,
    I guess, create workflow does not accept the password attribute while creating user account.
    You have to create the account using createprofile web service then update the password using changeprofile web service.
    I think this limitation is strategic, if you have password policies enabled, policies are applied to the container of the accounts.
    So OAM needs to have the DN of the user account to check if there are any password policies associated with the container during password updates,
    which might not be possible while using createProfile web service.
    - Sandeep

  • Error while creating a Characteristic Variable with Replacement Path

    Hi all,
        I am trying to create the Characteristic Variable ZVLOWDT (Low Date') with Replacement Path on characteristic ZSTARTDT (Start Date) and it gives the error 'Source to replace 'Low Date' is not defined.
       I have created a User Entry Variable VAR_DATE (Start Date) with interval like '01/01/2009 - 01/15/2009'  and  Customer Exit variable ZVCPDAY (does some calculation based on the input of VAR_DATE) on the same ZSTARTDT characteristic. I want to get the 01/01/2009 (lower range date of the selection) into this Characteristic Variable ZVLOWDT. We are in BI 7.0 and the following are it's properties:
    General Tab:
    Description: Low Date
    Technical Name: ZVLOWDT
    Type of Variable: Characteristic Value
    Processing by: Replacement Path
    Reference Characteristic: ZSTARTDT Start Date
    Details Tab:
    Variable Represents : Single value
    Variable is: Mandatory
    Variable is Ready for Input : unchecked
    Replacement Path Tab: Replacement Rule
    Replace Variable with : Variable
    Variable : VAR_DATE
    Replace with : KEY
    Why I am getting this error, PLEASE ?
    Thanks,
    Venkat.

    Hi Khaja,
       We could derive a Variable value from another Variable with out Customer Exit. There is a white paper.
    First have the User Entry Variable (ZV_X) and it accepts the date range like '01/01/2009 - 01/31/2009'. Next create the Characteristic variable (ZV_Y) of Replacement Path for which source variable will be ZV_X and we could get the 'FROM Date' (01/01/2009) from the selection (ZV_X) into it (ZV_Y).
    While creating the Characteristic variable (ZV_Y) of Replacement Path, I didn't find my newly created ZV_X variable in the list of available variables under 'Variable' header in 'Replacement Path' tab and it is causing the error  'Source to replace variable ZV_Y is not defined'. How could I create the Characteristic variable of Replacement Path, PLEASE ?
    Thanks,
    Venkat.

  • Getting following error while creating a datasource connection with oracle database.

    I have 32 bit oracle server installed in remote server.
    and 64 bit sql server 2008 r2 report server installed, and 64 bit oracle client installed on my report server  while create a new datasource
    in the report server i am getting this error
    Error 
    Attempt to load Oracle client libraries threw BadImageFormatException. This problem will occur when running in 64 bit mode with the 32 bit Oracle
    client components installed
    How can i fix this and let me know the reason

    This link will help you out.
    http://social.msdn.microsoft.com/Forums/en-US/sqlreportingservices/thread/0a38fa00-31de-49de-b68f-4c5a4565e5b1?prof=required
    Milan Das

Maybe you are looking for

  • Why do I have to keep entering my password to check my email?ios7 ipad

    Ever since ios7 was released I have to enter my email password every time I go into the mail app on my ipad. I have multiple emails so I have to enter all of them every time. On my iPhone 5, the mail app doesn't give me a problem but the voice mail k

  • Graphics files in Powerpoint for Mac

    When I try to play PowerPoint presentations originally composed in PowerPoint 2004 for Mac (v 11.3.5) on a PC, all graphics imported as pictures (for instance from web pages or from 'Grab) on the Mac show on the PC as an error. Most of these graphics

  • Non stock items

    Hi, I enter non stock item in Bom with Item category ' N', but I dont want Purchase requisition to get craeted. Setting in OPL8 for field Reservation/Purch.Req. can be set as 1 but will it effect reservations for other stock materials i,e. item categ

  • Messaging and Contacts Display Issue

    Hello, Having a problem where contacts are appearing as numbers instead of the contact name in the messages page. I have contact and it still says, "(xxx) xxx-xxxx." I've deleted the messages, deleted and added the contact, removed the 1 before the a

  • Updating iPad 2

    I am trying to update my iPad 2. When it is sync to the computer and I click on update for the iOS7 for my iPad - iTunes says "This version of iTunes (10.6.3) is the current version."There is no software update button on the iPad. HELP