Error while creating batches:Invalid organization in OPM inventory calendar

Hi,
While creating new batches for an intermediate some items, the user is getting the Error: "The Organization was found to be invalid while trying to validate the OPM Inventory Calendar". Everything is fine with the setup of OPM item, calendar, formula,recipe. This item is a non-dual and hence no item UOM conversion is required.Plant-Warehouse relationship is set at item level.If anyone has encountered this error,please throw some light on it.Thanks

Hi
I think you have might have missed the MAC set up in OPM financials.....pl make a set up and check.
Thanks
Raj

Similar Messages

  • Error While Creating Delivery : "Quantity falls below minimum Inventory"

    Hi All,
        I have an error while creating a delivery in BusinessOne. I have created a new item using the BusinessOne UI. And i created the salesOrder for this item and it was created successfully. But when i tried to create a salesDelivery for this Item i am facing an error that "Quantity Falls below Minimum Inventory".
          How can i solve this? How can i add quantities for this item in the inventory?
    Thanks in Advance,
    RAMU.

    Hi Ramu,
    also you can  make sure you are choosing the right WH in ctrlshiftS windows if You do, then chek on Inventory -> Inventory report -> inventory status if you have enought and available quantities for the delivery, if you dont then you gonna have to make the PO and the AP Invoice to add more quantity to that item
    regards

  • Error while creating organization in OIM 11.1.1.5.6

    Hi all,
    I am seeing the below mentioned issue while creating a new organization in OIM.
    oracle.adf.controller.ControllerException: ADFC-10001: cannot instantiate class 'oracle.iam.consoles.orgmgmt.tf.createorg.OrganizationCreateBean'
    This appears as soon as I click on the “create organization” link on OIM UI.
    I am also attaching the oim_server1.out for your reference.
    There has been no change in the environment except that I have applied a patch BP06 last week.
    This patch was applied successfully as seen in the logs.
    I am not sure if this issues comes due to the patch application.
    If anyone has faced a similar issue please let me know .
    Any inputs are deeply appreciated.
    <Apr 4, 2013 12:11:22 PM EDT> <Warning> <oracle.adfinternal.view.faces.lifecycle.LifecycleImpl> <BEA-000000> <ADF_FACES-60098:Faces lifecycle receives unhandled exceptions in phase RENDER_RESPONSE 6
    javax.faces.FacesException: javax.servlet.ServletException: OracleJSP error:
    javax.faces.FacesException: javax.faces.FacesException: oracle.adf.controller.ControllerException: ADFC-10001: cannot instantiate class 'oracle.iam.consoles.orgmgmt.tf.createorg.OrganizationCreateBean'
         at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:415)
         at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
         at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
         at oracle.adfinternal.view.faces.config.rich.RecordRequestAttributesDuringDispatch.dispatch(RecordRequestAttributesDuringDispatch.java:44)
         at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:45)
         at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:45)
         at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:45)
         at org.apache.myfaces.trinidadinternal.context.FacesContextFactoryImpl$OverrideDispatch.dispatch(FacesContextFactoryImpl.java:268)
         at com.sun.faces.application.ViewHandlerImpl.executePageToBuildView(ViewHandlerImpl.java:471)
         at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:140)
         at javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:191)
         at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:193)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:800)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:294)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:214)
         at javax.faces.webapp.FacesServlet.service(FacesServlet.java:266)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
         at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
         at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
         at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:447)
         at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:447)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
         at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
         at oracle.iam.platform.auth.web.PwdMgmtNavigationFilter.doFilter(PwdMgmtNavigationFilter.java:122)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
         at oracle.iam.platform.auth.web.OIMAuthContextFilter.doFilter(OIMAuthContextFilter.java:109)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
         at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:176)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
         at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
         at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
         at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
         at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
         at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
         at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
         at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
         at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    Caused By: javax.servlet.ServletException: OracleJSP error:

    URGENT** How to change  OIM user password from outside OIM

  • Recieving ORA-01722 invalid number error while creating a materialized view

    Hi,
    I am receiving a ORA-01722 invalid number error while creating a materialized view. when run the select statement of the view i don't get any error, but when i use the same select statement to create a materialized view i receive this error. Could any please help in resolving this error. Here is the code i am using to create a materialized view.
    CREATE MATERIALIZED VIEW MV_EBS_CH_CLOSED
    REFRESH FORCE ON DEMAND
    AS
    SELECT DISTINCT kr.request_id, org.org_unit_name,
    ebs_ch_ticket_type (kr.request_id) ticket_type,
    DECODE
    (kr.status_code,
    'CLOSED_SUCCESS', kr.last_update_date,
    'IN_PROGRESS', (SELECT MAX (start_time)
    FROM ebs_ch_datastore ecd1
    WHERE kr.request_id = ecd1.request_id
    AND workflow_step_name =
    'Final BA Review and Deployment Exit Criteria')
    ) closed_date,
    substr(krhd.visible_parameter12,1,10) siebel_start_date,
    kr.creation_date itg_start_date
    FROM kcrt_requests kr,
    kcrt_request_types krt,
    kcrt_req_header_details krhd, kcrt_request_details krd1,
    (SELECT koum.user_id user_id,
    DECODE (koup.org_unit_name,
    'IT Implementations', 'CHS - Service Management BA',
    koup.org_unit_name
    ) org_unit_name
    FROM krsc_org_unit_members koum, krsc_org_units koup
    WHERE 1 = 1
    AND 'Y' = koup.enabled_flag
    AND koum.org_unit_id = koup.org_unit_id
    AND EXISTS (
    SELECT 'X'
    FROM krsc_org_units kouc
    WHERE koup.org_unit_id = kouc.org_unit_id
    START WITH kouc.parent_org_unit_id =
    ANY (SELECT org_unit_id
    FROM krsc_org_units krsc_org_units1
    WHERE 'Clearinghouse' =
    org_unit_name)
    CONNECT BY kouc.parent_org_unit_id =
    PRIOR kouc.org_unit_id)
    UNION
    SELECT kou.manager_id user_id,
    DECODE
    (kou.org_unit_name,
    'IT Implementations', 'CHS - Service Management BA',
    kou.org_unit_name
    ) org_unit_name
    FROM krsc_org_units kou
    WHERE 'Y' = kou.enabled_flag
    START WITH kou.parent_org_unit_id =
    (SELECT org_unit_id
    FROM krsc_org_units krsc_org_units2
    WHERE 'Clearinghouse' = org_unit_name)
    CONNECT BY kou.parent_org_unit_id = PRIOR kou.org_unit_id) org
    WHERE krt.request_type_id = kr.request_type_id
    AND krt.request_type_name IN ('Bug Fix', 'IT Enhancement')
    and kr.REQUEST_ID = krd1.request_id
    and krd1.batch_number = 1
    AND kr.request_id = krhd.request_id
    AND org.user_id in (krd1.parameter4, krd1.parameter5, krd1.parameter7)
    AND ( 'CLOSED_SUCCESS' = kr.status_code
    OR 'IN_PROGRESS' = kr.status_code
    AND kr.request_id IN (
    SELECT request_id
    FROM (SELECT DISTINCT request_id,
    MAX
    (start_time)
    closed_date
    FROM ebs_ch_datastore
    WHERE 'Final BA Review and Deployment Exit Criteria' =
    workflow_step_name
    GROUP BY request_id))
    Thanks,
    Shaik Mohiuddin

    This error occurs when you try to create a materialized view , but if you run the sql the results are perfectly fine. Well it happend to me also and to fix this I made sure all the coulmns have the same data type which are used in joins or in where clause.
    use
    where
    to_number(col1)=to_number(col2) and to_number(col3)=to_number(col4)
    hope this helps..

  • Error while creating a task for creating an generic task  /app/dac/CustomSQ

    Hi ,
    I have created a sql file in DAC server /app/dac/CustomSQLs/ ,just to fire an update sql in database
    In DAC task tab i have created a task with the following:
    Command for incremental load :/app/dac/CustomSQLs/DBNameBeforeLoad.sql
    Primary source :flatfileconnection
    target source:DBCONNECTION_OLAP
    Execution type:SQL FILE
    Task phase:GENERAL
    I created subject area and assembled ,then created a Execution plan.
    When i try to execute this EP ,it shows the following error in DAC log:
    ANOMALY INFO::: Error while creating a task for creating an generic task /app/dac/CustomSQLs/DBNameBeforeLoad.sql
    MESSAGE:::/app/dac/CustomSQLs/DBNameBeforeLoad.sql - invalide template name!
    EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.TaskInitializationException
    com.siebel.analytics.etl.etltask.SQLFileTask.doInit(SQLFileTask.java:69)
    com.siebel.analytics.etl.etltask.GenericTaskImpl.init(GenericTaskImpl.java:194)
    Does my above configuration is correct ..?

    verify the following settings:
    1. mapping of ECC plant and storage location and logical system number with the appropriate availability group code since this links the stock types in EWM to ECC org elements (SPRO -> EWM -> Interfaces -> ERP Integration -> Goods movement)
    2. ensure the availability group configuration is correct (SPRO -> EWM -> GR Process -> Configure availability group for putaway) - check all applicable nodes in this configuration since the availability group code is assigned in the pertinent storage types

  • Error while creating the DWH tables using DAC

    Hi,
    I am getting error while creating the DWH tables using DAC. I have created a ODBC DSN using merant driver with DAC repository DB credentials and the test connection is successful. And while creating the tables i gave the olap dw credentials and the DSN name which i created earlier. But it throws the error as below:
    Please find the below mentioned error message
    =====================================
    STD OUTPUT
    =====================================
    CREATING SIEBEL DATABASE OBJECTS
    F:\DAC\bifoundation\dac\UTILITIES\BIN\DDLIMP /I N /s N /u infdomain /p ******* /c DB_DAC /G "SSE_ROLE" /f F:\DAC\bifoundation\dac/conf/sqlgen/ctl-file/oracle_bi_dw.ctl /b "" /K "" /X "" /W N
    Error while importing Siebel database schema.
    =====================================
    ERROR OUTPUT
    =====================================
    Siebel Enterprise Applications ODBC DDL Import Utility, Version 7.7 [18030] ENU
    Copyright (c) 2001 Siebel Systems, Inc. All rights reserved.
    This software is the property of Siebel Systems, Inc., 2207 Bridgepointe Parkway,
    San Mateo, CA 94404.
    User agrees that any use of this software is governed by: (1) the applicable
    user limitations and other terms and conditions of the license agreement which
    has been entered into with Siebel Systems or its authorized distributors; and
    (2) the proprietary and restricted rights notices included in this software.
    WARNING: THIS COMPUTER PROGRAM IS PROTECTED BY U.S. AND INTERNATIONAL LAW.
    UNAUTHORIZED REPRODUCTION, DISTRIBUTION OR USE OF THIS PROGRAM, OR ANY PORTION
    OF IT, MAY RESULT IN SEVERE CIVIL AND CRIMINAL PENALTIES, AND WILL BE
    PROSECUTED TO THE MAXIMUM EXTENT POSSIBLE UNDER THE LAW.
    If you have received this software in error, please notify Siebel Systems
    immediately at (650) 295-5000.
    F:\DAC\bifoundation\dac\UTILITIES\BIN\DDLIMP /I N /s N /u infdomain /p ***** /c DB_DAC /G SSE_ROLE /f F:\DAC\bifoundation\dac/conf/sqlgen/ctl-file/oracle_bi_dw.ctl /b /K /X /W N
    Connecting to the database...
    28000: [DataDirect][ODBC Oracle driver][Oracle]ORA-01017: invalid username/password; logon denied
    Unable to connect to the database...
    any help is appreciated.
    Thanks,
    RM

    The fact that you are getting an "ORA-01017: invalid username/password; logon denied" message indicates that you are at least talking to the database.
    The log shows that username "infdomain" is being used. Can you double check the username and password you have in DAC in a SQL*Plus/SQL Developer session?
    Please mark if useful/helpful,
    Andy.

  • Error while creating parameterise view

    I m getting below error while creating parameterise view
    CREATE OR REPLACE VIEW rdr_le_info_view (v_run_number , v_isin_cob )
    AS
    SELECT l.strategic_le
    ,cun.ucn cunucn
    ,cun.date
    ,cccs.ucn ucn
    ,cccs.agr_num
    FROM strat_le l
    ,ucn_name cun
    ,customer_setup cccs
    WHERE l.gfa_until_dt = '31-dec-9999'
    AND l.glas_until_dt = '31-dec-9999'
    AND l.int_until_dt = '31-dec-9999'
    AND cccs.run_num = v_run_num
    AND cccs.ucn_lead_office = cun.ucn
    AND cun.OID = l.client_oid;
    AND cccs.run_num = v_run_num
    ERROR at line 13:
    ORA-00904: "V_RUN_NUM": invalid identifier
    Plese help me in above.

    Try
    CREATE OR REPLACE VIEW rdr_le_info_view
    AS
    SELECT l.strategic_le
    ,cun.ucn cunucn
    ,cun.date
    ,cccs.ucn ucn
    ,cccs.agr_num
    FROM strat_le l
    ,ucn_name cun
    ,customer_setup cccs
    ,cccs.run_num run_num
    WHERE l.gfa_until_dt = '31-dec-9999'
    AND l.glas_until_dt = '31-dec-9999'
    AND l.int_until_dt = '31-dec-9999'
    AND cccs.ucn_lead_office = cun.ucn
    AND cun.OID = l.client_oid;Then call it like:
    select *
    from rdr_le_info_view
    where run_num = v_run_num;

  • Error while creating new projects using api

    Hello,
    I am having error while creating projects using standard api, PA_PROJECT_PUB.CREATE_PROJECTS. The error I am having is as follow.
    Source template ID is invalid.
    ===
    My code is as follow:
    SET SERVEROUTPUT ON SIZE 1000000
    SET VERIFY OFF
    define no=&amg_number
    DECLARE
    -- Variables used to initialize the session
    l_user_id NUMBER;
    l_responsibility_id NUMBER;
    cursor get_key_members is
    select person_id, project_role_type, rownum
    from pa_project_players
    where project_id = 1;
    -- Counter variables
    a NUMBER := 0;
    m NUMBER := 0;
    -- Variables needed for API standard parameters
    l_commit VARCHAR2(1) := 'F';
    l_init_msg_list VARCHAR2(1) := 'T';
    l_api_version_number NUMBER :=1.0;
    l_return_status VARCHAR2(1);
    l_msg_count NUMBER;
    l_msg_data VARCHAR2(2000);
    -- Variables used specifically in error message retrieval
    l_encoded VARCHAR2(1) := 'F';
    l_data VARCHAR2(2000);
    l_msg_index NUMBER;
    l_msg_index_out NUMBER;
    -- Variables needed for Oracle Project specific parameters
    -- Input variables
    l_pm_product_code VARCHAR2(30);
    l_project_in pa_project_pub.project_in_rec_type;
    l_key_members pa_project_pub.project_role_tbl_type;
    l_class_categories pa_project_pub.class_category_tbl_type;
    l_tasks_in pa_project_pub.task_in_tbl_type;
    -- Record variables for loading table variables above
    l_key_member_rec pa_project_pub.project_role_rec_type;
    l_class_category_rec pa_project_pub.class_category_rec_type;
    l_task_rec pa_project_pub.task_in_rec_type;
    -- Output variables
    l_workflow_started VARCHAR2(100);
    l_project_out pa_project_pub.project_out_rec_type;
    l_tasks_out pa_project_pub.task_out_tbl_type;
    -- Exception to call messag handlers if API returns an error.
    API_ERROR EXCEPTION;
    BEGIN
    -- Initialize the session with my user id and Projects, Vision Serves (USA0
    -- responsibility:
    select user_id into l_user_id
    from fnd_user
    where user_name = 'SSHAH';
    select responsibility_id into l_responsibility_id
    from fnd_responsibility_tl
    where responsibility_name = 'Projects Implementation Superuser';
    pa_interface_utils_pub.set_global_info(
    p_api_version_number => l_api_version_number,
    p_responsibility_id => l_responsibility_id,
    p_user_id => l_user_id,
    p_msg_count => l_msg_count,
    p_msg_data => l_msg_data,
    p_return_status => l_return_status);
    if l_return_status != 'S' then
    raise API_ERROR;
    end if;
    -- Provide values for input variables
    -- L_PM_PRODUCT_CODE: These are stored in pa_lookups and can be defined
    -- by the user. In this case we select a pre-defined one.
    select lookup_code into l_pm_product_code
    from pa_lookups
    where lookup_type = 'PM_PRODUCT_CODE'
    and meaning = 'Conversion';
    -- L_PROJECT_IN: We have to provide values for all required elements
    -- of this record (see p 5-13, 5-14 for the definition of the record).
    -- Customers will normally select this information from some external
    -- source
    l_project_in.pm_project_reference := 'AGL-AMG Project &no';
    l_project_in.project_name := 'AGL-AMG Project &no';
    l_project_in.created_from_project_id := 1;
    l_project_in.carrying_out_organization_id := 2864; /*Cons. West*/
    l_project_in.project_status_code := 'UNAPPROVED';
    l_project_in.start_date := '01-JAN-11';
    l_project_in.completion_date := '31-DEC-11';
    l_project_in.description := 'Trying Hard';
    l_project_in.project_relationship_code := 'Primary';
    -- L_KEY_MEMBERS: To load the key member table we load individual
    -- key member records and assign them to the key member table. In
    -- the example below I am selecting all of the key member setup
    -- from an existing project with 4 key members ('EE-Proj-01'):
    for km in get_key_members loop
    -- Get the next record and load into key members record:
    l_key_member_rec.person_id := km.person_id;
    l_key_member_rec.project_role_type := km.project_role_type;
    -- Assign this record to the table (array)
    l_key_members(km.rownum) := l_key_member_rec;
    end loop;
    -- L_CLASS_CATEGORIES: commented out below should fix the error we get
    -- because the template does not have an assigment for the mandatory class
    -- 'BAS Test'
    l_class_category_rec.class_category := 'Product';
    l_class_category_rec.class_code := 'Non-classified';
    -- Assign the record to the table (array)
    l_class_categories(1) := l_class_category_rec;
    -- L_TASKS_IN: We will load in a single task and a subtask providing only
    -- the basic fields (see pp. 5-16,5-17,5-18 for the definition of
    -- the task record)
    l_task_rec.pm_task_reference := '1';
    l_task_rec.pa_task_number := '1';
    l_task_rec.task_name := 'Construction';
    l_task_rec.pm_parent_task_reference := '' ;
    l_task_rec.task_description := 'Plant function';
    -- Assign the top task to the table.
    l_taskS_in(1) := l_task_rec;
    -- Assign values for the sub task
    l_task_rec.pm_task_reference := '1.1';
    l_task_rec.pa_task_number := '1.1';
    l_task_rec.task_name := 'Brick laying';
    l_task_rec.pm_parent_task_reference := '1' ;
    l_task_rec.task_description := 'Plant building';
    -- Assign the subtask to the task table.
    l_tasks_in(2) := l_task_rec;
    -- All inputs are assigned, so call the API:
    pa_project_pub.create_project
    (p_api_version_number => l_api_version_number,
    p_commit => l_commit,
    p_init_msg_list => l_init_msg_list,
    p_msg_count => l_msg_count,
    p_msg_data => l_msg_data,
    p_return_status => l_return_status,
    p_workflow_started => l_workflow_started,
    p_pm_product_code => l_pm_product_code,
    p_project_in => l_project_in,
    p_project_out => l_project_out,
    p_key_members => l_key_members,
    p_class_categories => l_class_categories,
    p_tasks_in => l_tasks_in,
    p_tasks_out => l_tasks_out);
    -- Check the return status, if it is not success, then raise message handling
    -- exception.
    IF l_return_status != 'S' THEN
    dbms_output.put_line('Msg_count: '||to_char(l_msg_count));
    dbms_output.put_line('Error: ret status: '||l_return_status);
    RAISE API_ERROR;
    END IF;
    -- perform manual commit since p_commit was set to False.
    COMMIT;
    --HANDLE EXCEPTIONS
    EXCEPTION
    WHEN API_ERROR THEN
    FOR i IN 1..l_msg_count LOOP
    pa_interface_utils_pub.get_messages(
    p_msg_count => l_msg_count,
    p_encoded => l_encoded,
    p_msg_index => i,
    p_msg_data => l_msg_data,
    p_data => l_data,
    p_msg_index_out => l_msg_index_out);
    dbms_output.put_line('ERROR: '||to_char(l_msg_index_out)||': '||l_data);
    END LOOP;
    rollback;
    WHEN OTHERS THEN
    dbms_output.put_line('Error: '||sqlerrm);
    FOR i IN 1..l_msg_count LOOP
    pa_interface_utils_pub.get_messages(
    p_msg_count => l_msg_count,
    p_encoded => l_encoded,
    p_msg_index => i,
    p_msg_data => l_msg_data,
    p_data => l_data,
    p_msg_index_out => l_msg_index_out);
    dbms_output.put_line('ERROR: '||to_char(l_msg_index_out)||': '||l_data);
    END LOOP;
    rollback;
    END;
    ===
    Msg_count: 1
    Error: ret status: E
    ERROR: 1: Project: 'AGL-AMG Project 1123'
    Source template ID is invalid.
    PL/SQL procedure successfully completed.

    I was using a custom Application, which had a id other then 275 (which belongs to Oracle projects)

  • Error while creating new user in Oracle 11i EBS

    I am getting following error while creating new user. How solve this issue?
    “Unable to load java class % specified profile option SIGNON_PASSWORD_CUSTOM. Please verify that the class exists and that it implements the java interface oracle.apps.fnd.security.PasswordValidation”.

    Following is the text from Note for Custom Password Validation logic:
    Customers who wish to use their own password validation logic may do
      so by writing their own Java classes that implement the
      oracle.apps.fnd.security.PasswordValidation Java interface.  The
      interface requires 3 methods to be implemented:
      1) public boolean validate(String user, String password)
        - This method takes a username and password, and then returns true
      or false, indicating whether the user's password is valid or invalid,
      respectively.
      2) public String getErrorStackMessageName()
        - This method returns the name of the message to display when the
      user's password is deemed invalid (i.e., the validate() method returns
      false).
      3) public String getErrorStackApplicationName()
        - This method returns the application shortname for the
      aforementioned error message.
      After writing the Java class to perform customized password
      validation, the customer must then set the value of the profile option
      SIGNON_PASSWORD_CUSTOM to be the full name of the class.  If, for
      example, the name of the Java class is
      oracle.apps.fnd.security.AppsPasswordValidation, then the value of the
      SIGNON_PASSWORD_CUSTOM profile option must be
      oracle.apps.fnd.security.AppsPasswordValidation.  Note that AOL/J
      will attempt to load this class dynamically.  Hence it is necessary to
      make the class accessible by AOL/J.  This means that in Forms, the
      class must first be loaded into the database using the loadjava
      command.
    You will need to apply the following patches for 11.5.1:
       1344802
       1363919
       1472974
       1351004
       1377615
    You will need to apply the following patches for 11.5.2:
       1377615

  • Error while creating a column in master

    Hi all,
    I am using the sap business one 8.8 version.
    I am getting an error while creating a user defined column for a master table.
    The error code is -104.
    The method I had used for creating a master table is as follows.
    *#region Create Table*
            public static bool CreateTable(string TableName, string TableDescription, SAPbobsCOM.BoUTBTableType TableType, SAPbouiCOM.Application oApplication, SAPbobsCOM.Company oCompany)
                SAPbobsCOM.UserTablesMD oUserTableMD;
                int intRecCode;
                bool boolResult = false;
                oUserTableMD = (SAPbobsCOM.UserTablesMD)oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserTables);
                try
                    if (!oUserTableMD.GetByKey(TableName))
                        oUserTableMD.TableName = TableName;
                        oUserTableMD.TableDescription = TableDescription;
                        oUserTableMD.TableType = TableType;
                        intRecCode = oUserTableMD.Add();
                        if (intRecCode == 0)
                            boolResult = true;
                catch (Exception e)
                    oApplication.MessageBox(e.Message, 1, "Ok", "", "");
                finally
                    System.Runtime.InteropServices.Marshal.ReleaseComObject(oUserTableMD);
                    GC.Collect();
                return boolResult;
            #endregion
    ==================================
    The following is the code for creating a column in the above master
    private static void AddField(string TableName, string ColumnName, string ColDescription, SAPbobsCOM.BoFieldTypes FieldType, int Size, SAPbobsCOM.BoFldSubTypes SubType, string ValidValues, string ValidDescription, string
    SetValidValues, SAPbouiCOM.Application oApplication, SAPbobsCOM.Company oCompany)
    int intLoop;
                string[] strValue, strDesc;
                SAPbobsCOM.UserFieldsMD oUserFieldsMD;
                SAPbobsCOM.Recordset oRecordSet;
                oUserFieldsMD = (SAPbobsCOM.UserFieldsMD)oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserFields);
                oRecordSet = (SAPbobsCOM.Recordset)oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset);
                try
                    oRecordSet.DoQuery("SELECT COUNT(*) FROM CUFD WHERE TableID = '" + TableName + "' AND AliasID = '" + ColumnName + "'");
                    if (Convert.ToInt16(oRecordSet.Fields.Item(0).Value) == 0)
                        System.Runtime.InteropServices.Marshal.ReleaseComObject(oRecordSet);
                        oRecordSet = null;
                        strValue = ValidValues.Split(Convert.ToChar(","));
                        strDesc = ValidDescription.Split(Convert.ToChar(","));
                        if (strValue.GetLength(0) != strDesc.GetLength(0))
                            throw new Exception("Invalid Values");
                        oUserFieldsMD.TableName = TableName;
                        oUserFieldsMD.Name = ColumnName;
                        oUserFieldsMD.Description = ColDescription;
                        oUserFieldsMD.Type = FieldType;
                        if (FieldType != SAPbobsCOM.BoFieldTypes.db_Numeric)
                            oUserFieldsMD.Size = Size;
                        else
                            oUserFieldsMD.EditSize = Size;
                        oUserFieldsMD.SubType = SubType;
                        oUserFieldsMD.DefaultValue = SetValidValues;
                        for (intLoop = 0; intLoop <= strValue.GetLength(0) - 1; intLoop++)
                            oUserFieldsMD.ValidValues.Value = strValue[intLoop];
                            oUserFieldsMD.ValidValues.Description = strDesc[intLoop];
                            oUserFieldsMD.ValidValues.Add();
                        if (oUserFieldsMD.Add() != 0)
                            UpdateLastErrorDetails(-104, oCompany);
                catch (Exception e)
                { oApplication.MessageBox(e.Message, 1, "Ok", "", ""); }
                finally
                    if (oRecordSet != null)
                        System.Runtime.InteropServices.Marshal.ReleaseComObject(oRecordSet);
                        oRecordSet = null;
                    System.Runtime.InteropServices.Marshal.ReleaseComObject(oUserFieldsMD);
                    GC.Collect();

    Hi,
    I am newly using BI publisher . I am using 10.1.3.4.0 . I am just trying to create a report in test name. that is the first step to create a report where i am getting error. I am using default RPD paint , where all the user and Groups are defined .

  • Error while creating a new asset in BCC.

    Getting below errors while creating a new asset(catalog/category) through BCC. I have imported the required data from CIM and install.bat from BIZUI.
    /atg/dynamo/servlet/sessiontracking/GenericSessionManager/KDzDSgGcJTS9nwvGpkr9wpyz4nnGKWPYs4QFFJ87Q1BjrTSd4JTG!1759330809!1386235100684
    atg.web.viewmapping.ItemMappingException: Invalid Mapping Mode: AssetManager.default
    [Flex Messaging] 12/05/2013 14:50:45.486 [ERROR] [Message.Remoting] Error processing remote invocation: atg.flex.service.RemoteOperationException: java.lang.NullPointerException
    Kindly suggest...

    As u imported data from CIM for production and publishing(assuming u imported for both), There is no need to run BIZUI.bat mannually, CIM runs this.
    Coming to ur error:
    From the logs  it seems that following mapMode is missing, It's OOTB and should have been loaded while Viewmapping repository data load.
    <add-item item-descriptor="mapMode" id="AmMmDef">
      <set-property name="name"><![CDATA[AssetManager.default]]></set-property>
    </add-item>
    I think there must have been problems during CIM data for publishing environment loading and because of that viemmapping is not loaded properly.
    Refer to this post for initial data load : Re: ATG ENVIRONMENT SETUP ISSUE
    Let us know if u didn't load publishing using CIM, there is some manual work required to load some repository.
    Thanks,
    Nitin.

  • Logminer error while creating a dictionary file

    Hi ,
    I am working on logminer.
    i got the following error while creating a dictionary file :--
    please help me out.
    SQL> show parameter utl_
    NAME TYPE VALUE
    utl_file_dir string $ORACLE_BASE/utl_file/cecms
    SQL> execute dbms_logmnr_d.build(dictionary_filename => 'dictionary.ora',dictionary_location => '/u00/oracle/utl_file/cecms');
    BEGIN dbms_logmnr_d.build(dictionary_filename => 'dictionary.ora',dictionary_location => '/u00/oracle/utl_file/cecms'); END;
    ERROR at line 1:
    ORA-01336: specified dictionary file cannot be opened
    ORA-29280: invalid directory path
    ORA-06512: at "SYS.DBMS_LOGMNR_D", line 928
    ORA-06512: at "SYS.DBMS_LOGMNR_D", line 2052
    ORA-06512: at line 1
    Asif

    ORA-01336: specified dictionary file cannot be opened
    Cause: The dictionary file or directory does not exist or is inaccessible.
    Action: Make sure that the dictionary file and directory exist and are accessible.
    Probably an issue with the rights on the directories.
    To confirm the same, try writing a sample procedure with UTL_FILE to create a file at this location and capture the error. It will give you more details about the problem.

  • Error while creating ASN in SNC

    dear all,
    We are tring to create an ASN against a PO in "Due list for purchasing documents" in SNC but getting the following errors, the material is invalid, ship from location is invalid and the customer location is invalid.
    PO created in ECC and received in SNC. The PO acknowledgement was also received back in ECC but not able to post ASN from SNC to ECC.
    Request to please let us know if we have missed out on some master data setting?
    Thanks in advance.
    mahesh.

    Hi Mahesh
    I am also getting the similar type of errors while creating ASN against planned receipts in SNC . I was trying to find for some help & saw this thread.
    Just wondering if you managed to rectify the error & able to post the ASN?  Will appreciate if you can share the resolution with me.
    We are also on SNC 7.02.
    Regards,
    Tapan

  • Error While Creating Sales Document - on a new rollout

    Dear Friends,
            While going for new Plant Creation on a Rollout, i am getting the following error while creating Sales Order,
    Kindly suggest the needy to me,
    " _Template and one-time material processing is not activated                                                                               
    No determination routine is specified for the SD documents for the 
    permitted combinations                                                                               
    The combination of sales organization, document category, and      
    document type or delivery type for the SD document is not permitted_ "
    Thanks & Regards
    T.Arulvanan

    Dear Freind,
    Have you assigned the Sales Area to the Document types
    T-code : OVAZ.
    Also Check the Sales Applications  V/c2
    Can you double click on the error and See what is the datails of the error appearing?
    Regards,
    Amlan Sarkar

  • Error while creating table maintenance generator

    Hi,
    I am getting below error while creating table maintenance generator.
    Screen SAPLZtest   0002 could not be generated.   In DYNPFIELD_ATTR field LENGTH has the invalid value 241.
    Reason for that error might be:
    In the table I have a field with a dataelement(customized) of type Char and length 241.
    But in the other table Iam using the standard data element(standard) of same type(241 char).In this table Iam able to create table maintenance generator without any errors.
    And the domain Iam using is same for both the tables.
    Please help me to solve this.
    Thanks in advance,
    Sravanthi

    Hi,
    you can go to transaction se51 and go your screen. active it.. you can find thesolution.
    refer these links..
    Error in table control
    Error while creating table maintainence generator !
    Thanks and Regards,
    Ahamed.

Maybe you are looking for

  • How can I use my Airport to block a particular IP or MAC?

    I have a MacBook Pro running OS 10.9.5 connected via WiFi to an 4th generation AirPort Time Capsule.  I think that this is also an an AirPort Extreme, but I am not sure.  Anyway, here is the problem: I want to block access to my local WiFi network fr

  • My iMac doesn't support iTunes 7, where can I download 10.6.3?

    I have an older iMac which I will be replacing in the coming months, but I need to get my hands on iTunes 10.6.3 as my iPhone running iOS6 will not connect to iTunes with it's current version (10.5.3). As far as I can tell, I can now only download iT

  • No sound when importing from a Sony HDR-HC7

    Hello all together, I bought a new Sony HDR-HC7, the camera is fantastic. There is only one thing perplexing me: When importing HD-Clips into iMovie HD 6.0.3 I cannot hear the sound that was recorded by the camera. When I play the clips, I can hear s

  • How to get full url using UCM RIDC api

    Hi, I am using RIDC api to get the full url of the document (including protocol, host, port info). I tried using DOC_INFO and GET_SEARCH_RESULTS api. The GET_SEARCH_RESULTS api returns the path but no protocol, host, port info. DOC_INFO does not cont

  • How to pass the value to the screen through call transaction

    hi i have got an requirement for which i have to call MIGO tcode through call transaction command. But here one list box GODYNPRO-ACTION (screen field) contains list of values . my requirement is when i will call the tcode MIGO it should take default