Error while creating duplicate repository

Hi,
While creating a duplicate repository, i'm encountering the following error:
"Unable to modify database"
Can anyone plz guide me on the same

Hi Ketan,
I'm not sure what you mean by setting the DBMS settings to blank... in mds.ini? This used to work in the Console when using SQL Server, but now by default it's disabled (but if you're trying this in the Console, you'd get an error right away on the mount/create/duplicate screen).
I assume the verify/repair found no errors? Have you tried archiving and unarchiving the repository? It's a cheesy way to do a Duplicate operation -- maybe it will help you in the short term while we figure out what's going on (unless you can't unarchive because of the same error).
Are you using the administrator user (I think in Oracle it's called System) or a user that you created yourself? Is it a user that MDS/Console proposed to create for you when you first used this Oracle DBMS? (That would've been a long time ago, since you're upgrading from SP4 -- this user is fine, but one that you may have created yourself may not have all the right permissions.)
Could you please post the version number you're using, so I can find out if there are any known issues? Also, please make sure the version of the Oracle client on the machine that is running MDS is up-to-date with respect to the Oracle server (assuming they are not the same machine).
I will also do further investigation about the error in the log. Thank you for your patience; we will do everything we can to get you up and running as soon as possible!
Cleopatra

Similar Messages

Error while Creating Master Repository: ORA-01031: insufficient Privileges

Hi,
I'm trying to install ODI into my VM.
I have done the installation and while creating Master Repository, I'm getting following error:
ORA-01031: insufficient Privileges
I'm using Oracle & have created user as ODI_MASTER with Admin Privileges.
I'll be using it to load metadata onto planning (Version 11.1.2)
Is there anything that I'm missing out on.
Jitendra.

Seems missing grants on the user you are using to create Master Repository.
you are using Oracle .. grant connect, resource to <your_user>. These two rolesa have sufficient access to db to create the master repository.
execuute the sql from sys user
Regards,
Amit
Edited by: amitgupta1202 on 20 Aug, 2009 10:42 PM

Error while creating work repository

Hi all,
I am facing problem while creating work repository in ODI.
I have successfuly created master repository and also test connection comes out to be succesull for work repository.
But while i click on OK it gives CREATION error stating
No data found : \snps_login_security.xml(Access is Denied)
Thanks and Regards,
Priyanka

Hi ,
u r having Oracle DB......?
You have the databases and ODI installed in the same machine.....?
Have u chkd ur databse/schema rigts .....
can u plz chk on this front .....as well as the user/pw ur using for ur connections.....
Thanks
Ananda

Error while creating master repository.......

Hi All,
While creating master repository........
Test Connection is successful.
After that i had selected technology as Oracle
when i clicked on ok, one error has pop up: java.sql.SQLException: ORA-00907: missing right parenthesis
What i have to do after this....?
Regards,
Dinesh

Which model are you talking about?
I'm quiet sure that you have to change the TECH_ORACLE.xml.
Are you sure that u have modified the file
oracledi\lib\scripts\xml\TECH_Oracle.xml
and not the file
oracledi\impexpTECH_Oracle.xml
For the certification :
The Repository can be installed on any relational database engine supporting ANSI ISO 89 syntax, such as Oracle, Microsoft SQL Server, Sybase AS Enterprise, IBM DB2 UDB, IBM DB2/400, etc.
You can also use for evaluation purposes the demo repository provided with Oracle Data Integrator. This repository is based on an Hypersonic SQL Database. and requires no particular installation.
I don't have any other information sorry!

Error while creating Informatica Repository Service

I am installing OBIApps - Have done it previously so I know it is a complex installation.
This time my server is a Linux RH 64bit... Informatica server installed ok. Using the administrator panel, I am now trying to create the repository service.
I am getting error: Database driver event…Error occurred loading library [libclntsh.so.10.1: wrong ELF class: ELFCLASS32] Database driver event…Error occurred loading library [libpmora8.so]
I know the infra structure guys installed Oracle client 32bit... Maybe this is the trouble ?
I have LD_LIBRARY_PATH blank... if I point the LD_LIBRARY_PATH to the oracle client bin... it seems that informatica startup has trouble since administrator panel doesn´t start. went back to LD_LIBRARY_PATH blank and startup is ok and administrator is ok... but error in creating repository service persists...
I appreciate any hints.
Txs.
Antonio

Try with by execute relink all libraries:
$relink all
or else go with 64bit

Error while creating the repository

Hi MDM Guru's
I have Installed SAP MDM 5.5 SP06 Patch 1 on Solaris with Oracle 10g
Initially I could create the repository also but when I changed the DBMS settings Data Path and Index Path from Blank to some path. I am not able to create repository and in the Server Log I see the following Error.
==============================================================================
2008/02/14 15:58:12.139   Error: Service 'MD1', Schema 'A2i_xCat_DBs', ERROR CODE=1435 ||| ORA-01435: user does not exist
ZTEST_m000 does not exist or bad password provided
Last CMD: ALTER SESSION SET CURRENT_SCHEMA = ZTEST_m000
6 2008/02/14 15:58:12.208   Init Database Tag: ZTESTMD1ORCL_5_3_4_3
6 2008/02/14 15:58:12.300   Error: Service 'MD1', Schema 'A2i_xCat_DBs', ERROR CODE=1435 ||| ORA-01435: user does not exist
ZTEST_m000 does not exist or bad password provided
Last CMD: ALTER SESSION SET CURRENT_SCHEMA = ZTEST_m000
==============================================================================
But even after I set the Data Path and Index Path to blank what it was, I still get the same error. Can someone please guide me on this one?
Needs to resolve this Urgently.
Pravin

Hi Dilmit Chadha,
NO I did not. When I said I changed the DBMS Settings that means. In the SAP MDM COnsole, right click on mounted MDM server, click on DBMS Settings, Input the DBMS Server, username and passowrd and on the screen I changed the Data Path and Index Path.
As per me Data Path is for creating the data file of Oracle tablespace for the Data part of Repository. and Index Path is for creating the data file of oracle for the Index part of the same Repository.
Following error may also help which I see in the server log at the time when I tried to create the repository.
==============================================================================
2008/02/14 15:44:08.957   Creating Repository: ZTEST, on DBMS Server: MD1
6 2008/02/14 15:44:09.164   Error: Service 'MD1', Schema 'sapr3', ERROR CODE=1119 ||| ORA-01119: error in creating database file ' /oracle/MD1/sapdata2/A2I_ZTEST_m000_Ix.DBF'
ORA-27040: file create error, unable to create file
SVR4 Error: 2: No such file or directory
Last CMD: CREATE TABLESPACE A2I_ZTEST_m000_Ix DATAFILE ' /oracle/MD1/sapdata2/A2I_ZTEST_m000_Ix.DBF' SIZE 128K REUSE AUTOEXTEND ON NEXT 256K MAXSIZE UNLIMITED DEFAULT STORAGE (INITIAL 32K NEXT 128K MAXEXTENTS UNLIMITED PCTINCREASE 0)
==============================================================================
Pravin

Error while creating EM repository

I am getting the following error while trying ,
$ emca -config dbcontrol db -repos create
INFO: This operation is being logged at /vis_ora_home/vis_db/VIS/db/tech_st/10.2.0//cfgtoollogs/emca/emca_2009-02-24_05-29-41-PM.log.
Feb 24, 2009 5:30:17 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Database instance unavailable.
Refer to the log file at /vis_ora_home/vis_db/VIS/db/tech_st/10.2.0//cfgtoollogs/emca/emca_2009-02-24_05-29-41-PM.log for more details.
Could not complete the configuration. Refer to the log file at /vis_ora_home/vis_db/VIS/db/tech_st/10.2.0//cfgtoollogs/emca/emca_2009-02-24_05-29-41-PM.log for more details.
I am trying to configure the EM on an EBS R12 Database(Oracle 10g, ver:10.2.0.2.0), and I find that there is no user sysman, is this causing the errors?

SEVERE: Database instance unavailable.Did you source the database env file or set ORACLE_HOME and ORACLE_SID before running the command?
I am trying to configure the EM on an EBS R12 Database(Oracle 10g, ver:10.2.0.2.0), and I find that there is no user sysman, is this causing the errors?Please make sure you follow the steps in the following notes:
Note: 278100.1 - How To Drop, Create And Recreate DB Control In A 10g Database
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=278100.1
Note: 458533.1 - How to Enable Enterprise Manager on the Oracle E-Business Suite Release 12
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=458533.1

Error while creating the repository in OWB 10.2

Hi,
I'm trying to create the design the repository for OWB and i'm getting the following error.
main.main[5]20090916@13:49:28.028: 00> oracle.wh.service.impl.assistant.ProcessEngine.display(ProcessEngine.java:1409): Log File Directory = S:\OWB10G24.001\OraHome_1\owb\UnifiedRepos\log_090916_134928.000.log
main.main[5]20090916@13:49:28.028: 00> oracle.wh.service.impl.assistant.ProcessEngine.display(ProcessEngine.java:1409): OWBCC_HOME(OracleHome) = S:\OWB10G24.001\OraHome_1
main.main[5]20090916@13:49:29.029: 00> oracle.wh.ui.jcommon.WhPushButton@1687e7c: WhPushButton constructor : rtsString = Reset OWBRT_SYS's Password (Optional)
main.main[5]20090916@13:49:30.030: 00> oracle.wh.ui.install.assistant.wizards.NewMLSPanel.initLangs(NewMLSPanel.java:339): ... I'm in initLangs()...
main.main[5]20090916@13:49:31.031: 00> oracle.wh.ui.jcommon.WhPushButton@1687e7c: WhPushButton constructor : rtsString = Reset OWBRT_SYS's Password (Optional)
main.main[5]20090916@13:49:31.031: 00> oracle.wh.ui.install.assistant.wizards.AssistantWizardDefinition.display(AssistantWizardDefinition.java:823): [setLocaleByPreference]: Can not read install.properties. Using default.
main.main[5]20090916@13:49:32.032: 00> oracle.wh.ui.install.assistant.wizards.AssistantWizardDefinition.display(AssistantWizardDefinition.java:823): [setLocaleByPreference]: Can not read install.properties. Using default.
main.main[5]20090916@13:49:32.032: 00> oracle.wh.ui.common.UIUtils@1522de2: Setting cursor called on oracle.wh.ui.owbcommon.OWBWizard$7[frame0,0,0,0x0,invalid,hidden,layout=java.awt.BorderLayout,title=,resizable,normal,defaultCloseOperation=DO_NOTHING_ON_CLOSE,rootPane=javax.swing.JRootPane[,0,0,0x0,invalid,layout=javax.swing.JRootPane$RootLayout,alignmentX=null,alignmentY=null,border=,flags=385,maximumSize=,minimumSize=,preferredSize=],rootPaneCheckingEnabled=true]
main.main[5]20090916@13:49:32.032: 00> oracle.wh.ui.common.UIUtils@1522de2: Setting cursor called on oracle.wh.ui.owbcommon.OWBWizardWelcomePanel[,0,0,0x0,invalid,layout=java.awt.BorderLayout,alignmentX=null,alignmentY=null,border=,flags=9,maximumSize=,minimumSize=,preferredSize=]

Its resolved now it was because of an access issue.

Content server 401 error while creating content repository

Hi All
I have installed Content server 640 on SUSE Linux 10 SP2 without selecting the SAP DB option as i wanted to store all my files on FILE SYSTEM.
My filesystem is as below
======================================================================================================
kmdqp:~ # df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 9.9G 3.1G 6.3G 34% /
udev 18G 88K 18G 1% /dev
/dev/sda3 286G 260M 271G 1% /usr/sap
======================================================================================================
kmdqp:/usr/sap # ls -ltr
total 36
drwx------ 2 root root 16384 Nov 18 23:47 lost+found
drwxr-xr-x 2 root root 4096 Nov 19 03:12 dmscs
drwxr-xr-x 2 root root 4096 Nov 19 03:18 dmscsc
drwxr-xr-x 9 root root 4096 Nov 19 15:17 apache_1.3.27
drwxrwxrwx 14 dqpcs sapsys 4096 Nov 19 22:55 dqpcs
drwxrwxrwx 14 dqpcs sapsys 4096 Nov 19 22:55 dqpcsc
====================================================================================================
Now my question are
1) DO i need to install SAPDB(MaxDB), it is mandatory or can i store my documents at the file sytem level without the SAP DB.
2) When i run the tx-code CSadmin and goto any TAB it asks me for a userid and passwd, i give <sid>cs and <sid>csc user and their respective passwords, but i get the below error
HTTP error: 401 Authorization Required Bad local password for user dqpcs
Message no. CMS025
Diagnosis
Error in accessing via HTTP
401 Authorization Required
Bad local password for user dqpcs
======================================================================================================
Can you please help in this.
And my dqpcs and dqpcsc users home directory is changed to /usr/sap in the etc/default/useradd file during the installation.
Can anyone help on this please.
Thanks and regards
Prasad K

Hi
We have solved the issue by setting the Adminsecurity parameter as o.
Regards
Prasad K

Error While Creating Repository Content at the time of Installation

Hi Guys,
When i'm trying to create repository content at the time of informatica installation i'm getting error "Cannot create repository content or restore".
I'hve attached the log file below
ONE')
INSERT INTO REP_CARD_TYPE VALUES (4, 'MANY TO MANY')
CREATE TABLE REP_TARG_TYPE
TARGET_TYPE integer,
TYPE_NAME varchar(20)
INSERT INTO REP_TARG_TYPE VALUES (0, 'NONE')
INSERT INTO REP_TARG_TYPE VALUES (1, 'DIMENSION')
INSERT INTO REP_TARG_TYPE VALUES (2, 'FACT')
CREATE VIEW REP_DATABASE_DEFS AS SELECT
DISTINCT
DBDNAM DATABASE_NAME,
SRCNAM DEF_SOURCE,
SUBJ_NAME SUBJECT_AREA,
NULL VERSION_ID,
OPB_DBD.VERSION_NUMBER DATABASE_VERSION_NUMBER
FROM OPB_DBD, OPB_SUBJECT, OPB_SRC
WHERE OPB_DBD.SUBJ_ID = OPB_SUBJECT.SUBJ_ID AND
OPB_SRC.DBDID = OPB_DBD.DBDID AND
OPB_SRC.VERSION_NUMBER = OPB_DBD.VERSION_NUMBER AND
OPB_SRC.IS_VISIBLE = 1
ORA-01031: insufficient privileges
Database driver error...
Function Name : executeDirect
SQL Stmt : CREATE VIEW REP_DATABASE_DEFS AS SELECT
DISTINCT
DBDNAM DATABASE_NAME,
SRCNAM DEF_SOURCE,
SUBJ_NAME SUBJECT_AREA,
NULL VERSION_ID,
OPB_DBD.VERSION_NUMBER DATABASE_VERSION_NUMBER
FROM OPB_DBD, OPB_SUBJECT, OPB_SRC
WHERE OPB_DBD.SUBJ_ID = OPB_SUBJECT.SUBJ_ID AND
OPB_SRC.DBDID = OPB_DBD.DBDID AND
OPB_SRC.VERSION_NUMBER = OPB_DBD.VERSION_NUMBER AND
OPB_SRC.IS_VISIBLE = 1
Oracle Fatal Error
Database driver error...
Function Name : ExecuteDirect
Oracle Fatal Error
Error occurred while creating the repository
An error has occurred while creating contents. Dropping repository tables...
Create Contents operation on repository [Oracle_BI_DW_Base] ended at 08/10/2009 11:50:49. Elapsed time is 0:00:10.
[[REP_57106] Repository operation error. See repository service log for detailed information.]
Failed to execute create.
Completed at Mon Aug 10 11:50:49 2009
Error:
ExitCode: 1
Installation Complete
======================

Hi Rama,
You don't need to give your etl_ram user a dba role.
Please refer to the Oracle® Business Intelligence Applications - Installation Guide for Informatica PowerCenter Users, especially to chapter +4.4.1 Create Databases for Oracle BI Applications and Informatica PowerCenter Components+
Quoting:
Make sure that the Oracle Business Analytics Warehouse instance is granted the SSE_ROLE. For more information, see Section 4.4.1.1, "How to Create the SSE Role."
This role would typically get more privileges than just CONNECT and RESOURCE.
Hope it helps,
Michal

Error while creating a new folder in resource view of workbench.

hi
I am getting this error while creating a new folder from the resources view.
Please help me in this regard.
!ENTRY com.adobe.repository.ui.eclipse.forms 4 0 2009-02-19 18:18:36.340
!MESSAGE REP-001-011: Problem creating a resource folder
!STACK 0
com.adobe.repository.ui.eclipse.IDERepositoryException: com.adobe.repository.bindings.dsc.client.ResourceRepositoryClientException: ALC-REP-106-000: Caught DSCException: ALC-DSC-012-000: com.adobe.idp.dsc.registry.ServiceNotFoundException: Service: RepositoryService not found.
at com.adobe.repository.ui.eclipse.impl.dsc.IDERepositoryDSCImpl.createFolder(IDERepositoryD SCImpl.java:117)
at com.adobe.repository.ui.eclipse.core.Repository.createFolder(Repository.java:522)
at com.adobe.repository.ui.eclipse.actions.NewFolderActionDelegate.workspaceRun(NewFolderAct ionDelegate.java:91)
at com.adobe.repository.ui.eclipse.actions.WorkspaceActionDelegateRunner$1.run(WorkspaceActi onDelegateRunner.java:76)
at org.eclipse.core.internal.resources.Workspace.run(Workspace.java:1737)
at com.adobe.repository.ui.eclipse.actions.WorkspaceActionDelegateRunner.run(WorkspaceAction DelegateRunner.java:83)
at org.eclipse.ui.internal.PluginAction.runWithEvent(PluginAction.java:254)
at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionI tem.java:539)
at org.eclipse.jface.action.ActionContributionItem.access$2(ActionContributionItem.java:488)
at org.eclipse.jface.action.ActionContributionItem$5.handleEvent(ActionContributionItem.java :400)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:66)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:928)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3348)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:2968)
at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1930)
at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:1894)
at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:422)
at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
at com.adobe.lcide.rcp.Application.run(Unknown Source)
at org.eclipse.core.internal.runtime.PlatformActivator$1.run(PlatformActivator.java:78)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau ncher.java:92)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav a:68)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:400)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:177)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.eclipse.core.launcher.Main.invokeFramework(Main.java:336)
at org.eclipse.core.launcher.Main.basicRun(Main.java:280)
at org.eclipse.core.launcher.Main.run(Main.java:977)
at org.eclipse.core.launcher.Main.main(Main.java:952)
Caused by: com.adobe.repository.bindings.dsc.client.ResourceRepositoryClientException: ALC-REP-106-000: Caught DSCException: ALC-DSC-012-000: com.adobe.idp.dsc.registry.ServiceNotFoundException: Service: RepositoryService not found.
at com.adobe.repository.bindings.dsc.client.ResourceRepositoryClient.writeResource(ResourceR epositoryClient.java:920)
at com.adobe.repository.ui.eclipse.impl.dsc.IDERepositoryDSCImpl.createFolder(IDERepositoryD SCImpl.java:114)
... 31 more
Thanks
Ullas

Thanks Jasmin I did as you told and was able to create folder. But while installing the Event-Dsc and the workflow-dsc I am getting some internal error as given below.
!ENTRY com.adobe.DSC_Admin_UI 4 4 2009-02-24 15:41:34.984
!MESSAGE install of C:\Adobe\LiveCycle8.2\deploy\adobe-event-dsc.jar failed
!STACK 0
ALC-DSC-000-000: com.adobe.idp.dsc.DSCRuntimeException: Internal error.
at com.adobe.idp.dsc.registry.component.impl.ComponentRegistryImpl._install(ComponentRegistr yImpl.java:456)
at com.adobe.idp.dsc.registry.component.impl.ComponentRegistryImpl.install(ComponentRegistry Impl.java:254)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:64)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:615)
at com.adobe.idp.dsc.component.impl.DefaultPOJOInvokerImpl.invoke(DefaultPOJOInvokerImpl.jav a:118)
at com.adobe.idp.dsc.interceptor.impl.InvocationInterceptor.intercept(InvocationInterceptor. java:140)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor$1.doInTransaction(Transa ctionInterceptor.java:74)
at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionBMTAdapterBean.doBMT(EjbTran sactionBMTAdapterBean.java:197)
at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EJSLocalStatelessEjbTransactionBMTAdapter_ 3af08fdf.doBMT(Unknown Source)
at com.adobe.idp.dsc.transaction.impl.ejb.EjbTransactionProvider.execute(EjbTransactionProvi der.java:95)
at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor.intercept(TransactionInt erceptor.java:72)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.interceptor.impl.InvocationStrategyInterceptor.intercept(InvocationStra tegyInterceptor.java:55)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.interceptor.impl.InvalidStateInterceptor.intercept(InvalidStateIntercep tor.java:37)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.interceptor.impl.AuthorizationInterceptor.intercept(AuthorizationInterc eptor.java:109)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.interceptor.impl.JMXInterceptor.intercept(JMXInterceptor.java:48)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.engine.impl.ServiceEngineImpl.invoke(ServiceEngineImpl.java:115)
at com.adobe.idp.dsc.routing.Router.routeRequest(Router.java:118)
at com.adobe.idp.dsc.provider.impl.base.AbstractMessageReceiver.invoke(AbstractMessageReceiv er.java:315)
at com.adobe.idp.dsc.provider.impl.soap.axis.sdk.SoapSdkEndpoint.invokeCall(SoapSdkEndpoint. java:138)
at com.adobe.idp.dsc.provider.impl.soap.axis.sdk.SoapSdkEndpoint.invoke(SoapSdkEndpoint.java :81)
at sun.reflect.GeneratedMethodAccessor279.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:615)
at org.apache.axis.providers.java.RPCProvider.invokeMethod(RPCProvider.java:397)
at org.apache.axis.providers.java.RPCProvider.processMessage(RPCProvider.java:186)
at org.apache.axis.providers.java.JavaProvider.invoke(JavaProvider.java:323)
at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
at org.apache.axis.handlers.soap.SOAPService.invoke(SOAPService.java:454)
at org.apache.axis.server.AxisServer.invoke(AxisServer.java:281)
at org.apache.axis.transport.http.AxisServlet.doPost(AxisServlet.java:699)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at org.apache.axis.transport.http.AxisServletBase.service(AxisServletBase.java:327)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:989)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:930)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:145)
at com.adobe.idp.dsc.provider.impl.soap.axis.InvocationFilter.doFilter(InvocationFilter.java :43)
at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java: 190)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:130)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain._doFilter(WebAppFilterChain.java:87)
at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:761)
at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:673)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:498)
at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:464)
at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.jav a:90)
at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:744)
at com.ibm.ws.wswebcontainer.WebContainer.handleRequest(WebContainer.java:1433)
at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:100)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink .java:465)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink .java:394)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.ready(HttpInboundLink.java:274)
at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.sendToDiscriminators(NewConn ectionInitialReadCallback.java:214)
at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.complete(NewConnectionInitia lReadCallback.java:113)
at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionLi stener.java:152)
at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:213)
at com.ibm.io.async.AbstractAsyncFuture.fireCompletionActions(AbstractAsyncFuture.java:195)
at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:136)
at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:195)
at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:743)
at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:873)
at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1469)
Caused by: java.lang.ClassNotFoundException: com.adobe.idp.event.bootstrap.EventBootstrapImpl
at com.adobe.idp.dsc.DSContainerSearchPolicy.findClass(DSContainerSearchPolicy.java:178)
at org.ungoverned.moduleloader.ModuleClassLoader.loadClass(ModuleClassLoader.java:161)
at java.lang.ClassLoader.loadClass(ClassLoader.java:561)
at com.adobe.idp.dsc.registry.component.impl.ComponentRegistryImpl._install(ComponentRegistr yImpl.java:403)
... 70 more
As I am using the trial version so I have isnatlled all the products Workbench, Server and the application server in the same machine. My System has 2GB Ram.
Any help in this will be of great help
Regards
Ullas

Error while creating subsite from site template

Hi,
I am getting below error while creating subsite from existing site template .
Sachin Bhosale

There must be a duplicate Email field created in any list/library. The cause can be identified by renaming the site template to sitename.cab > extact the cab file > open the manifest file search for email and see where it is associated. Refer
to the following blog post for more information
http://sharepointserved.blogspot.com/2012/11/a-duplicate-name-was-found.html
http://sharepoint.stackexchange.com/questions/11944/error-when-creating-a-site-from-custom-template-a-duplicate-field-name-name
Cheers,

Error while creating the DWH tables using DAC

Hi,
I am getting error while creating the DWH tables using DAC. I have created a ODBC DSN using merant driver with DAC repository DB credentials and the test connection is successful. And while creating the tables i gave the olap dw credentials and the DSN name which i created earlier. But it throws the error as below:
Please find the below mentioned error message
=====================================
STD OUTPUT
=====================================
CREATING SIEBEL DATABASE OBJECTS
F:\DAC\bifoundation\dac\UTILITIES\BIN\DDLIMP /I N /s N /u infdomain /p ******* /c DB_DAC /G "SSE_ROLE" /f F:\DAC\bifoundation\dac/conf/sqlgen/ctl-file/oracle_bi_dw.ctl /b "" /K "" /X "" /W N
Error while importing Siebel database schema.
=====================================
ERROR OUTPUT
=====================================
Siebel Enterprise Applications ODBC DDL Import Utility, Version 7.7 [18030] ENU
Copyright (c) 2001 Siebel Systems, Inc. All rights reserved.
This software is the property of Siebel Systems, Inc., 2207 Bridgepointe Parkway,
San Mateo, CA 94404.
User agrees that any use of this software is governed by: (1) the applicable
user limitations and other terms and conditions of the license agreement which
has been entered into with Siebel Systems or its authorized distributors; and
(2) the proprietary and restricted rights notices included in this software.
WARNING: THIS COMPUTER PROGRAM IS PROTECTED BY U.S. AND INTERNATIONAL LAW.
UNAUTHORIZED REPRODUCTION, DISTRIBUTION OR USE OF THIS PROGRAM, OR ANY PORTION
OF IT, MAY RESULT IN SEVERE CIVIL AND CRIMINAL PENALTIES, AND WILL BE
PROSECUTED TO THE MAXIMUM EXTENT POSSIBLE UNDER THE LAW.
If you have received this software in error, please notify Siebel Systems
immediately at (650) 295-5000.
F:\DAC\bifoundation\dac\UTILITIES\BIN\DDLIMP /I N /s N /u infdomain /p ***** /c DB_DAC /G SSE_ROLE /f F:\DAC\bifoundation\dac/conf/sqlgen/ctl-file/oracle_bi_dw.ctl /b /K /X /W N
Connecting to the database...
28000: [DataDirect][ODBC Oracle driver][Oracle]ORA-01017: invalid username/password; logon denied
Unable to connect to the database...
any help is appreciated.
Thanks,
RM

The fact that you are getting an "ORA-01017: invalid username/password; logon denied" message indicates that you are at least talking to the database.
The log shows that username "infdomain" is being used. Can you double check the username and password you have in DAC in a SQL*Plus/SQL Developer session?
Please mark if useful/helpful,
Andy.

Error while creating a new asset in BCC.

Getting below errors while creating a new asset(catalog/category) through BCC. I have imported the required data from CIM and install.bat from BIZUI.
/atg/dynamo/servlet/sessiontracking/GenericSessionManager/KDzDSgGcJTS9nwvGpkr9wpyz4nnGKWPYs4QFFJ87Q1BjrTSd4JTG!1759330809!1386235100684
atg.web.viewmapping.ItemMappingException: Invalid Mapping Mode: AssetManager.default
[Flex Messaging] 12/05/2013 14:50:45.486 [ERROR] [Message.Remoting] Error processing remote invocation: atg.flex.service.RemoteOperationException: java.lang.NullPointerException
Kindly suggest...

As u imported data from CIM for production and publishing(assuming u imported for both), There is no need to run BIZUI.bat mannually, CIM runs this.
Coming to ur error:
From the logs it seems that following mapMode is missing, It's OOTB and should have been loaded while Viewmapping repository data load.
<add-item item-descriptor="mapMode" id="AmMmDef">
<set-property name="name"><![CDATA[AssetManager.default]]></set-property>
</add-item>
I think there must have been problems during CIM data for publishing environment loading and because of that viemmapping is not loaded properly.
Refer to this post for initial data load : Re: ATG ENVIRONMENT SETUP ISSUE
Let us know if u didn't load publishing using CIM, there is some manual work required to load some repository.
Thanks,
Nitin.

Oracle.jbo.RowCreateException: JBO-25017: Error while creating a new ROW

I am trying same multi step PO example. I have created a search page and there are 3 other pages for PO Header, PO Line and Review/Submit Page. I am coming on 2nd page(creating Line Item) and when I click on create new item record I am getting this error. Any help will be aprrecaited.
oracle.jbo.RowCreateException: JBO-25017: Error while creating a new entity row for POLinesEO.
This is my code for POLineShipFullVORowImpl.java
protected void create(oracle.jbo.AttributeList nvp)
POLinesEOImpl lineEO = (POLinesEOImpl)getEntity(0);
POShipmentEOImpl shipmentEO = (POShipmentEOImpl)getEntity(1);
try
// Create Lines EO
lineEO.create(nvp);
// Create Shipments EO
shipmentEO.create(lineEO);
// Calling this ensures that any personalization default values are
// properly set since the OAF normally sets this in the super.create(), but
// since this is not called in this workaround, we need another method
// to ensure customer defaults are applied.
// The following method was introduced in OAF internal release 11.5.10J. Since
// the production release of the ToolBox must be able to run on 11.5.10I, this
// cannot be enabled.
// setDefaultValue();
catch (Exception ex)
lineEO.revert();
shipmentEO.revert();
if (ex instanceof oracle.jbo.JboException)
oracle.jbo.JboException jboEx = (oracle.jbo.JboException)ex;
// Developers have to do the mapping on their own becauce of the override.
jboEx.doEntityToVOMapping(getApplicationModule(), new oracle.jbo.ViewObject[]{getViewObject()});
throw jboEx;
throw OAException.wrapperException(ex);
} // end create()
Code for PoLinesEOImpl.java
* Initializes a new purchase order line.
public void create(AttributeList attributeList)
// NOTE: header id is automatically set by BC4J because of the
// composition association.
super.create(attributeList);
OADBTransaction transaction = (OADBTransaction)getOADBTransaction();
// DEFAULT: line id
Number lineId = transaction.getSequenceValue("FWK_TBX_PO_LINES_S");
setLineId(lineId);
// DEFAULT: Line number
POHeaderEOImpl headerEO = getPOHeaderEO();
Number newLineNum = headerEO.getNextLineNum();
setLineNumber(newLineNum);
} // end create()
* Sets <code>value</code> as the attribute value for ShipmentNumber
* Business Rules
* Required; cannot be null
* Cannot be updated on a committed line
* Must be unique for this purchase order
* Must be >= 1
public void setLineNumber(Number value)
if (value != null)
// Verify value is > 0
if (value.compareTo(0) <= 0)
throw new OAAttrValException(OAException.TYP_ENTITY_OBJECT,
getEntityDef().getFullName(), // EO name
getPrimaryKey(), // EO PK
"LineNumber", // Attribute Name
value, // Attribute value
"AK", // Message product short name
"DEBUG -- add message"); // Message name
// To verify uniqueness, start by checking the entity cache.
com.sun.java.util.collections.Iterator lineIterator =
getEntityDef().getAllEntityInstancesIterator(getDBTransaction());
Number lineId = getLineId();
Number headerId = getHeaderId();
while ( lineIterator.hasNext() )
POLinesEOImpl cachedLine =
(POLinesEOImpl)lineIterator.next();
Number cachedLineNum = cachedLine.getLineNumber();
Number cachedLineId = cachedLine.getLineId();
Number cachedHeaderId = cachedLine.getHeaderId();
if ((cachedLineNum != null) &&
(cachedLineNum.compareTo(value) == 0) &&
(cachedLineId.compareTo(lineId) != 0) && // Exclude this line
(cachedHeaderId.compareTo(headerId) == 0))
throw new OAAttrValException(OAException.TYP_ENTITY_OBJECT,
getEntityDef().getFullName(), // EO name
getPrimaryKey(), // EO PK
"LineNumber", // Attribute Name
value, // Attribute value
"AK", // Message product short name
"DEBUG -- add message"); // Message name
// Didn't find a duplicate in the entity cache so now we check the database.
// Note: don't bother with this if the header is in a NEW state since that
// means we won't have any lines in the database yet.
POHeaderEOImpl headerEO = getPOHeaderEO();
if (headerEO.getEntityState() != STATUS_NEW)
PurchaseEntityExpert poExpert =
POHeaderEOImpl.getPurchaseEntityExpert(getOADBTransaction());
PoLineNumVVOImpl valLineNumVO =
(PoLineNumVVOImpl)poExpert.findValidationViewObject("PoLineNumVVO1");
valLineNumVO.initQuery(headerId, value);
// We're doing an existence check; shouldn't have any rows.
if (valLineNumVO.hasNext())
throw new OAAttrValException(OAException.TYP_ENTITY_OBJECT,
getEntityDef().getFullName(), // EO name
getPrimaryKey(), // EO PK
"LineNumber", // Attribute Name
value, // Attribute value
"AK", // Message product short name
"DEBUG -- add message"); // Message name
// If this is the largest line number for this order, this will store it for
// reference when creating subsequent lines.
headerEO.resetLineNum(value);
setAttributeInternal(LINENUMBER, value);
} // end setLineNumber()
Edited by: user9941374 on Mar 15, 2012 3:16 PM

Hi Frank,
As per the steps mentioned in the following link :
http://www-apps.us.oracle.com:1100/fwk/jdev/doc/devguide/bus/bus_java.htm#tl
I have created the required entity objects and view objects.
I have an entity JobsDEO which is based on a view per_jobs_vl which is itself based on 2 tables,per_jobs_f and per_jobs_tl,wherein _tl is the translation table.
The entity for _tl table is JobTranslationEO and has no VO associated with it.Its the JobsVO,based on JobsDEO,that has to handle any interactions with this entity too.
JOBSDEO has a property set up for HCM_DBSEQUENCE,which makes it read the value of job_id from the sequence per_jobs_s.
Now,when I try to insert into the JobsVO,based on JobsDEO,it gives me the above mentioned error.
One more thing is that the error does'nt occur when we commit a row,its just when we click the "+" button in the AM Tester that we get this error.
Please advice.

Error while creating duplicate repository

Similar Messages

Maybe you are looking for