Error while creating infotype message no. pg293

Hi guys,
I am creating a new infotype after creating the PS structure when i click on generate objects i get an error saying "An internal error has occurred" message no. PG293.
kindly provide a solution.
points will be rewarded.
thanks

INFOTYPE CREATION WILL BE TAKEN CARE OF THE ABAPER AS RAO SAID
AS THE OUT PUT WILL HAVE TO SEEN IN ALL THE SERVERS THIS IS A LITTLE BIT TECHNICAL WORK
Start transaction PM01, Create Infotype, by entering the transaction code.
You access the Create Infotype screen:
2. In the Infotype no. field, enter the four-digit number of the infotype you want to create.
When you specify the infotype number, please remember to enter any leading zeros.
3. Choose IT characteristics.
This accesses the Display View Infotypes: Overview screen.
4. Choose Table view   Display   Change.
This accesses the Change View Infotypes: Overview screen.
5. Create a new entry for your infotype.
You can create new entries by
choosing Edit   New entries or
copying an infotype entry with similar characteristics.
If you want to copy an existing entry, select the entry you want to copy and choose
Edit   Copy as.
6. Check the entries in the individual fields.
Result: You have maintained the characteristics of your infotype.
Please check the above config for maintaining your infotype in PA30 and also check your entries in T582A & S.
Edited by: Sikindar on Mar 9, 2008 8:23 PM

Similar Messages

Error while creating candidate (Message no. HRRCF0001155)

Hi experts,
I am launching recruiters page thorugh NWBC. While creating external candidate application, I am getting this error -
Error while creating candidate
Message no. HRRCF0001155
In SLG1, below is error analysis -
@5C\QError@ Error while creating candidate @35\QLong text exists@ @16\QDetail exists@
@5C\QError@ The error occurred in program CL_HRRCF_CANDIDATE_REGISTER===CM001 line 186 @35\QLong text exists@ @16\QDetail exists@
@5C\QError@ Error while creating candidate @35\QLong text exists@ @16\QDetail exists@
@5C\QError@ The error occurred in program CL_HRRCF_CANDIDATE_REGISTER===CM001 line 118 @35\QLong text exists@ @16\QDetail exists@
@8N\QCancel@ Business partner 824 already exists @5F\QNo long text exists@ @16\QDetail exists@
@5C\QError@ The error occurred in program CL_HRRCF_CANDIDATE============CM002 line 132 @35\QLong text exists@ @16\QDetail exists@
Please help.
Thanks,
Neha

Hi Nicole,
Thank you very much for the reply. You are correct, but I checked the SICF set up was ok. Currently we are not using the workflow. Recruiter's role assignment was also proper.
This problem was related to business partner number range assignment for internal/external candidates, since it was not creating new business partner. It is ok now.
Regards,
Neha

Error while creating infotype 1764

Hi All,
When i am trying to give special booking authorization for a student to a module in student file, i am getting an error msg " error while creating infotype 1764". The same is working in EHP4 but not in EHP3.
Pls give your valuable inputs to resolve the issue.
Regards,
Sravan

Dear Sravan,
Check whether module in question is included in appraisal or not. If not then maintain it.
Hope it will solve your issue.
Regards
Vinod Kumar

Error while creating a Message Area

Hi All,
When I create a Message Area using the UI element 'MessageArea', I get the following error message at the bottom of the screen:
"Note: Multiple message areas have been implemented, but only one is supported"
I just have only one Message Area created, but still I get this error.
Regards,
Tom

> 1) I am getting the error message"Valuation area not defined", while creating a requisition. How to solve this problem?
Please Go to OMS2 Material types and Select Material Type and set Qty / Value is Checked in all Valuation areas. Also go to Material Master and ensure all the values Maintained in Accounting view.
> 2) We can put a purchase order on hold. What is the equivalent thing in Purchase requisition?
The Hold Functionality is for External Documents only.
> 3) What is the difference between holding a PO and changing the PO by ME22n? What are the fields which change PO does not open up, but hold PO opens up?
Whenever you are not sure about the Details in PO you can put the Document on Hold and Later you can Save after.
> 4) The tax code is set as default in PO. We want to make a PO of a material which is usually taxable, but not in this case. But the tax code is set as default. So, how to overcome this?
You can not set Default Tax code for Purchase order ME21N. Further the Tax codes can be Pulled into Purchase Order thru Purchase info Records.
Regards,
Ashok

Error while creating Support message

Hi,
When I tried to create OSS Message from R/3 system I am getting below error.
Customizing for feedback functionality missing
Can you please help me out from this issue.
Thanks
Rajesh

Rajesh, this usually means the managed system is not set up to communicate with the Solution Manager Service Desk. Please review the SolMan IMG activity Specify Service Desk Destination in Managed Systems. The Performance Assistant will tell you what entries to make in table BCOS_CUST on each managed system.
If this does not work, check your user authorizations on both systems - they should both contain object S_RFCACL.
Hope this helps!
Lori

Error while creating Infotype 29

Hi all,
While trying to create info type 29 we are getting an error as shown in the attachment.
Kindly help me out to resolve this issue.
Thanks & Regards,
Sakthi

Hi
While creating / changing the record select the values of WC & Hazard area's from drop down list instead of entering manually, try like this.
:Kedhar

Error while creating SC: Message E COM_PRODUCT_SETTINGS 001

Hi Experts,
When try to create a SC the error message is through: Message E COM_PRODUCT_SETTINGS 001 cannot be processed in plug mode HTTP.
I am configuring the SRM7.0 for the first time and system throws the error message. Kindly help to resolve this issue.
Please find the screen shot enclosed.
Regards,
Sudhakar

Hi Sudhakar,
Are you on the recent level of SRM 7? If not - check if this OSS note is relevant for you 1449146.
The system you are configuring - is it a copy of another system or being set up from scratch?
Check your:
Initial data load (customizing objects and master data)
Org structure (wrt to both users and purchase organization)

STRUST - Error while creating PSE

Hi all,
i want to create the PSE for SNC (SAP Cryptolib). -> Webservices with Certificates
SNC ID: sys-sapsnc@<domain>.com
Algorithm: RSA
Key Length: 1024
Error message:
Error while creating PSE
Message no. TRUST040
System: ERP 2005
System PSE is already created
SSL Server PSE is already created
SSL Client (Anonymous) PSE is already created
SSL Client (Standard) PSE is already created
regards

Hi Ralf,
I think I did something similar with XI about a year ago. You have to create or import some certificates / CA Certificates using STRUST (it depends if you have officially signed certificates or if you are using your own selfsigned certificates. In this case you need the root certificate as well).
=> Note 510007 might be useful
=> When importing your own root CA make sure you choose a valid namespace for Trust Center (starting with Z e.g. ZSELFCA) and choose Root-CA for Category.
=> If you want to view, modify or deltete entries choose menu > certificate > database and you will see a screen where you can search for the entries in the certificate database
Just in case you have problems with your PSE make a copy of directory /usr/sap/SID/DVEBMGS<XX>/sec
and delete your existing PSE to create a new one (Carefully!!!
- First of all make sure you installed SAPSECULIB.
- After that you should create a new PSE or create new entries for SSL Server (optionally client etc.)
- You can create an entry directly in TRUST Manager. The resulting certificate will be selfsigned. You can sign
this cert using your CA and then after having it signed you have to import the certificate response (use openssl to do cert stuff)
=> This might be helpful: http://help.sap.com/saphelp_nw04/helpdata/en/24/61ab3b92818b70e10000000a114084/frameset.htm
You can import your own certificates from menu > certificate > import in the maintenance section of the SSL Server PSE or you can just click on the "Import Certificate" button
When done you should check that your generated/imported certificates are working by simple accessing your server using the https protocol (e.g. https://<server>:<sslport>/sap/public/ping should be fine)
Just in case you used your own CA to sign the certificates your Browser will display popup saying that the certificate is not signed by any known trusted CA (we know that so we can ignore that
If you want to use client cert authentication you have to repeat the explained steps for SSL Client (Standard)
=> Create the PSE, sign the generated certificate etc., import the certificate response
When this is all done you should do the following:
- Create a RFC Destination for HTTPS Communication (call sm59, open the Folder HTTP Connections to External Server)
- In the destination enter the destination Host and the path of your application
- After that open the TAB Logon/Security
- In the Status of Secure Protocol Section choose SSL active and DEFAULT SSL Client (Standard) as SSL Client Certificate
- Save all your changes
You should now be able to use this destination for your Webservice communication and it will be encrypted using SSL
Hope this helps
If you have further questions let me know
Cheers

Error while creating absence record in PA30 using 2001 infotype

Hi all,
iam getting an error while creating absence record for infotype 2001for LOP(unpaid)
error : No quota available for att./abs. 6000 for pers. no. 61000052 between 31.12.2009 and 31.12.2009
i have did
Create a absence type LOP
Determine Entry Screens and Time Constraint Classes
Define Counting Rules
Assign Counting Rules to Absence Types
Payroll: India>>Absences>Describe Absence Valuation Rules 01 Unpaid Leave
Group Absences for Absence Valuation>>Absence valuation rule>>F4 country grouping 40>> assign 01Unpaid Leave
please solve this

Actually I don't know how your system is configured.
However, the error you're receiving seems you have assigned the absence type to a quota type.
Please go to your counting rule and check whether Deduction rule - absence quotas - within entitlement field is filled.
If yes, get the deduction rule value and go to
SPRO Time man- Time data rec - Absences - Absence Cat - Abs counting - rules for counting (new) - deduction rules for abs quotas and check the quota type in here.
If there is a quota assignment in place, before creating an IT2001 you need to create a IT2006 for that specific time period.
Or, you need to delete the quota assignment via two config steps mentioned above.
Regards,
Dilek

Error while creating a PO

Hi all,
I have got an error while creating a PO with an Internal Order. I am trying to post this PO against an Internal Order. The error message says that:
User status BUDG is active (ORD 10034). When I click the perform assistant, it says that according to this status, transaction 'Material purchase order' is not allowed.
Can somebody plss help me in this regards, I will assign points.
Thank you,
Sony

What you enter in the Cost element master data is only for defaulting the cost center or order when you use that GL account.
When you see a message transction requires an account assignment, you can enter the relevant cost center for which the cost is incurred.
For your information, If an order has been marked as statistical, you can find it in KO02 change order > Control data. there may be check box saying statistical. If it is not available, then, you can't make it statistical until, you make that field available for change for the order type. Usually orders of a particular type can be made as statistical, by providing a model order to the order type. In the model order you specify that it will be statistical.

Error while creating a new folder in resource view of workbench.

hi
I am getting this error while creating a new folder from the resources view.
Please help me in this regard.
!ENTRY com.adobe.repository.ui.eclipse.forms 4 0 2009-02-19 18:18:36.340
!MESSAGE REP-001-011: Problem creating a resource folder
!STACK 0
com.adobe.repository.ui.eclipse.IDERepositoryException: com.adobe.repository.bindings.dsc.client.ResourceRepositoryClientException: ALC-REP-106-000: Caught DSCException: ALC-DSC-012-000: com.adobe.idp.dsc.registry.ServiceNotFoundException: Service: RepositoryService not found.
at com.adobe.repository.ui.eclipse.impl.dsc.IDERepositoryDSCImpl.createFolder(IDERepositoryD SCImpl.java:117)
at com.adobe.repository.ui.eclipse.core.Repository.createFolder(Repository.java:522)
at com.adobe.repository.ui.eclipse.actions.NewFolderActionDelegate.workspaceRun(NewFolderAct ionDelegate.java:91)
at com.adobe.repository.ui.eclipse.actions.WorkspaceActionDelegateRunner$1.run(WorkspaceActi onDelegateRunner.java:76)
at org.eclipse.core.internal.resources.Workspace.run(Workspace.java:1737)
at com.adobe.repository.ui.eclipse.actions.WorkspaceActionDelegateRunner.run(WorkspaceAction DelegateRunner.java:83)
at org.eclipse.ui.internal.PluginAction.runWithEvent(PluginAction.java:254)
at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionI tem.java:539)
at org.eclipse.jface.action.ActionContributionItem.access$2(ActionContributionItem.java:488)
at org.eclipse.jface.action.ActionContributionItem$5.handleEvent(ActionContributionItem.java :400)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:66)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:928)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3348)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:2968)
at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1930)
at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:1894)
at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:422)
at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
at com.adobe.lcide.rcp.Application.run(Unknown Source)
at org.eclipse.core.internal.runtime.PlatformActivator$1.run(PlatformActivator.java:78)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau ncher.java:92)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav a:68)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:400)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:177)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.eclipse.core.launcher.Main.invokeFramework(Main.java:336)
at org.eclipse.core.launcher.Main.basicRun(Main.java:280)
at org.eclipse.core.launcher.Main.run(Main.java:977)
at org.eclipse.core.launcher.Main.main(Main.java:952)
Caused by: com.adobe.repository.bindings.dsc.client.ResourceRepositoryClientException: ALC-REP-106-000: Caught DSCException: ALC-DSC-012-000: com.adobe.idp.dsc.registry.ServiceNotFoundException: Service: RepositoryService not found.
at com.adobe.repository.bindings.dsc.client.ResourceRepositoryClient.writeResource(ResourceR epositoryClient.java:920)
at com.adobe.repository.ui.eclipse.impl.dsc.IDERepositoryDSCImpl.createFolder(IDERepositoryD SCImpl.java:114)
... 31 more
Thanks
Ullas

Thanks Jasmin I did as you told and was able to create folder. But while installing the Event-Dsc and the workflow-dsc I am getting some internal error as given below.
!ENTRY com.adobe.DSC_Admin_UI 4 4 2009-02-24 15:41:34.984
!MESSAGE install of C:\Adobe\LiveCycle8.2\deploy\adobe-event-dsc.jar failed
!STACK 0
ALC-DSC-000-000: com.adobe.idp.dsc.DSCRuntimeException: Internal error.
at com.adobe.idp.dsc.registry.component.impl.ComponentRegistryImpl._install(ComponentRegistr yImpl.java:456)
at com.adobe.idp.dsc.registry.component.impl.ComponentRegistryImpl.install(ComponentRegistry Impl.java:254)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:64)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:615)
at com.adobe.idp.dsc.component.impl.DefaultPOJOInvokerImpl.invoke(DefaultPOJOInvokerImpl.jav a:118)
at com.adobe.idp.dsc.interceptor.impl.InvocationInterceptor.intercept(InvocationInterceptor. java:140)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor$1.doInTransaction(Transa ctionInterceptor.java:74)
at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionBMTAdapterBean.doBMT(EjbTran sactionBMTAdapterBean.java:197)
at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EJSLocalStatelessEjbTransactionBMTAdapter_ 3af08fdf.doBMT(Unknown Source)
at com.adobe.idp.dsc.transaction.impl.ejb.EjbTransactionProvider.execute(EjbTransactionProvi der.java:95)
at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor.intercept(TransactionInt erceptor.java:72)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.interceptor.impl.InvocationStrategyInterceptor.intercept(InvocationStra tegyInterceptor.java:55)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.interceptor.impl.InvalidStateInterceptor.intercept(InvalidStateIntercep tor.java:37)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.interceptor.impl.AuthorizationInterceptor.intercept(AuthorizationInterc eptor.java:109)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.interceptor.impl.JMXInterceptor.intercept(JMXInterceptor.java:48)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.engine.impl.ServiceEngineImpl.invoke(ServiceEngineImpl.java:115)
at com.adobe.idp.dsc.routing.Router.routeRequest(Router.java:118)
at com.adobe.idp.dsc.provider.impl.base.AbstractMessageReceiver.invoke(AbstractMessageReceiv er.java:315)
at com.adobe.idp.dsc.provider.impl.soap.axis.sdk.SoapSdkEndpoint.invokeCall(SoapSdkEndpoint. java:138)
at com.adobe.idp.dsc.provider.impl.soap.axis.sdk.SoapSdkEndpoint.invoke(SoapSdkEndpoint.java :81)
at sun.reflect.GeneratedMethodAccessor279.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:615)
at org.apache.axis.providers.java.RPCProvider.invokeMethod(RPCProvider.java:397)
at org.apache.axis.providers.java.RPCProvider.processMessage(RPCProvider.java:186)
at org.apache.axis.providers.java.JavaProvider.invoke(JavaProvider.java:323)
at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
at org.apache.axis.handlers.soap.SOAPService.invoke(SOAPService.java:454)
at org.apache.axis.server.AxisServer.invoke(AxisServer.java:281)
at org.apache.axis.transport.http.AxisServlet.doPost(AxisServlet.java:699)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at org.apache.axis.transport.http.AxisServletBase.service(AxisServletBase.java:327)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:989)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:930)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:145)
at com.adobe.idp.dsc.provider.impl.soap.axis.InvocationFilter.doFilter(InvocationFilter.java :43)
at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java: 190)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:130)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain._doFilter(WebAppFilterChain.java:87)
at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:761)
at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:673)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:498)
at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:464)
at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.jav a:90)
at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:744)
at com.ibm.ws.wswebcontainer.WebContainer.handleRequest(WebContainer.java:1433)
at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:100)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink .java:465)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink .java:394)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.ready(HttpInboundLink.java:274)
at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.sendToDiscriminators(NewConn ectionInitialReadCallback.java:214)
at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.complete(NewConnectionInitia lReadCallback.java:113)
at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionLi stener.java:152)
at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:213)
at com.ibm.io.async.AbstractAsyncFuture.fireCompletionActions(AbstractAsyncFuture.java:195)
at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:136)
at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:195)
at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:743)
at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:873)
at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1469)
Caused by: java.lang.ClassNotFoundException: com.adobe.idp.event.bootstrap.EventBootstrapImpl
at com.adobe.idp.dsc.DSContainerSearchPolicy.findClass(DSContainerSearchPolicy.java:178)
at org.ungoverned.moduleloader.ModuleClassLoader.loadClass(ModuleClassLoader.java:161)
at java.lang.ClassLoader.loadClass(ClassLoader.java:561)
at com.adobe.idp.dsc.registry.component.impl.ComponentRegistryImpl._install(ComponentRegistr yImpl.java:403)
... 70 more
As I am using the trial version so I have isnatlled all the products Workbench, Server and the application server in the same machine. My System has 2GB Ram.
Any help in this will be of great help
Regards
Ullas

Getting error while creating the variable of Schema Element type

Hi everybody,
For creating a variable of schema element type I am doing the following steps...
Select 'Variables' after right clicking on bpel process. IN this window, go to 'Create VAriable' then select 'Element' type. Now in Type Choose, I expanded the my imported schema files. And selected a element type, then click ok to create this variable... I am getting the message...
IN ORDER TO SAVE IMPORTED WSDL/SCHEMA FILES, YOU MUST HAVE A PARTNER LINK LOCATED UNDER THE CURRENT PROJECT DIRECTORY.
What is mean by that.
I have imported the schema files in project. AFter that I have imported them into the WSDL also. Now why I am getting error while creating the variable. However I can create variable directly in .BPEL file then everything is fine. And it is working also. But what is mean with the above error? Why I am not able to create variable through GUI?
Thanks.

Hi,
I have this same problem this morning, and I was going crazy, until I found this webpage on the internet:
[http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process|http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process]
The idea is that the jdeveloper is not very good working with directories with spaces on the directory name. If you move all your work to a directory without spaces, it will work smoothly. At least, it had worked for me.
Regards,
Nacho

Error while creating a Development plan template

Hi Gurus,
I am facing errors while creating Development Plan Template.
This is how it goes :
When i click on Define Forms for Talent Assessment --> a wizard pops up & i select Development Plan :
In first step, I am giving Title,Integration with SAP Learning Solution (check) & a rating scale.
Now after clicking next, I am adding 2 development areas :
1) Training
2) Mentoring,
now as soon as I'm clicking on End Configuration, It displays 2 errors & 1 warning message :
error1 : Element Appraisal Template 'XXXXX' contains errors.Cannot change status.
error2 : Value type 000000XXX of value class Q does not exists
Warning 1 : You have maintained a description that is not displayed.
In PHAP_CATALOG, when I'm trying to manually release the Criterion Group (VB) or Appraisal template (VA), it does not allow me to do it.
Kindly let me know how to proceed further.
Regards
bharti

Hi,
Even though it gives the error,the new RTF template is uploaded and it is reflected when I query the template again.
But when I run the Concurent program and see the output,the output still shows me the old template.
Regards
Jujaar

Error while creating a task for creating an generic task /app/dac/CustomSQ

Hi ,
I have created a sql file in DAC server /app/dac/CustomSQLs/ ,just to fire an update sql in database
In DAC task tab i have created a task with the following:
Command for incremental load :/app/dac/CustomSQLs/DBNameBeforeLoad.sql
Primary source :flatfileconnection
target source:DBCONNECTION_OLAP
Execution type:SQL FILE
Task phase:GENERAL
I created subject area and assembled ,then created a Execution plan.
When i try to execute this EP ,it shows the following error in DAC log:
ANOMALY INFO::: Error while creating a task for creating an generic task /app/dac/CustomSQLs/DBNameBeforeLoad.sql
MESSAGE:::/app/dac/CustomSQLs/DBNameBeforeLoad.sql - invalide template name!
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.TaskInitializationException
com.siebel.analytics.etl.etltask.SQLFileTask.doInit(SQLFileTask.java:69)
com.siebel.analytics.etl.etltask.GenericTaskImpl.init(GenericTaskImpl.java:194)
Does my above configuration is correct ..?

verify the following settings:
1. mapping of ECC plant and storage location and logical system number with the appropriate availability group code since this links the stock types in EWM to ECC org elements (SPRO -> EWM -> Interfaces -> ERP Integration -> Goods movement)
2. ensure the availability group configuration is correct (SPRO -> EWM -> GR Process -> Configure availability group for putaway) - check all applicable nodes in this configuration since the availability group code is assigned in the pertinent storage types

Error while creating a new entity row for testEO

Hi All,
I have a 1st page where I enter the employeeNumber and that particular parameter should get displayed in the 2nd page when I click on the "SubmitButton".I am moving to the 2nd page using pageContext.forwardImmediately.I am passing my parameter with this URL.But, I am getting "Error while creating a new entity row for testEO" in my code before i enter anything in " employeeNumber " field in the 1st page.
My CO code is:
/*===========================================================================+
| Copyright (c) 2001, 2005 Oracle Corporation, Redwood Shores, CA, USA |
| All rights reserved. |
+===========================================================================+
| HISTORY |
+===========================================================================*/
package xxfc.oracle.apps.test.OAProject1.webui;
import com.sun.java.util.collections.HashMap;
import oracle.apps.fnd.common.VersionInfo;
import oracle.apps.fnd.framework.OAApplicationModule;
import oracle.apps.fnd.framework.OAViewObject;
import oracle.apps.fnd.framework.webui.OAControllerImpl;
import oracle.apps.fnd.framework.webui.OAPageContext;
import oracle.apps.fnd.framework.webui.OAWebBeanConstants;
import oracle.apps.fnd.framework.webui.beans.OAWebBean;
import oracle.apps.fnd.framework.webui.beans.message.OAMessageTextInputBean;
import oracle.jbo.Row;
import xxfc.oracle.apps.test.OAProject1.server.testVOImpl;
* Controller for ...
public class testCO extends OAControllerImpl
public static final String RCS_ID="$Header$";
public static final boolean RCS_ID_RECORDED =
VersionInfo.recordClassVersion(RCS_ID, "%packagename%");
* Layout and page setup logic for a region.
* @param pageContext the current OA page context
* @param webBean the web bean corresponding to the region
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
OAApplicationModule am =(OAApplicationModule) pageContext.getApplicationModule(webBean);
testVOImpl vo1 = (testVOImpl)am.findViewObject("testVO1");
vo1.executeQuery();
Row r = vo1.first();
System.out.println("**************Error in the below Line**********************");
Row row = vo1.createRow();
vo1.insertRow(row);
row.setNewRowState(Row.STATUS_INITIALIZED);
* Procedure to handle form submissions for form elements in
* a region.
* @param pageContext the current OA page context
* @param webBean the web bean corresponding to the region
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
OAApplicationModule am =(OAApplicationModule) pageContext.getApplicationModule(webBean);
OAViewObject vo1 = (OAViewObject)am.findViewObject("testVO1");
if(!vo1.isPreparedForExecution())
vo1.executeQuery();
Row row = vo1.getCurrentRow();
am.getOADBTransaction().commit();
String strEvent = pageContext.getParameter(EVENT_PARAM);
if (strEvent.equals("update"))
String custId = pageContext.getParameter("CustID");
pageContext.putParameter("CstID",custId);
HashMap hashMap = new HashMap();
hashMap.put("CustomerId",custId);
am.getOADBTransaction().commit();
pageContext.forwardImmediately("OA.jsp?page=/xxfc/oracle/apps/test/OAProject1/webui/popupPG&CustID=custId",
null,
OAWebBeanConstants.KEEP_MENU_CONTEXT,
null,
hashMap, //hashmap
true,
OAWebBeanConstants.ADD_BREAD_CRUMB_YES
thanks,
Akshata

Hi Niranjana,
It did not work I am getting the same error.does the WHO column order in the table matters? My WHO columns are in the below order:
LAST_UPDATE_DATE
LAST_UPDATED_BY
LAST_UPDATE_LOGIN
CREATION_DATE
CREATED_BY
my error is:
oracle.jbo.RowCreateException: JBO-25017: Error while creating a new entity row for testEO.
It appears on the top of my page as a message.
Thanks,
Akshata
Edited by: Akshata on Mar 15, 2012 12:29 AM

Error while creating infotype message no. pg293

Similar Messages

Maybe you are looking for