Error while creating logical port in SOAMANAGER
Hi,
Im consuming the webservice.While creating the new logical .Im getting the following error.
Error: Error in WSDL access: Exception occurred in communication framework:Error in HTTP Framework:401Unauthorizedhttp://vmtmasterdev.rune2emaster.rune2e.com:1080/sap/bc/srt/wsdl/sdef_Z_NUMBER/wsdl11/ws_poli
I have entered logical port name,description, URL for WSDL access.When i press enter i got the above eeror.
Please help me.
Regards,
Brahmaji
Hi,
tell me please wenn you run SOAMANAGER you have to apply an user Authentication or not?
If yes If the service that you want to configure is an Enterprise Service or Self-Modelled Service.
In case of Web Services Please Check again in The ICF Services under
sap/bc/srt/SAP and Check if your Service activated or not.
If you don´t have Access to SOAmanagement you can see the specified Roles hier
http://help.sap.com/saphelp_nw04s/helpdata/en/2b/07074155bcf26fe10000000a1550b0/frameset.htm
Regards
A.Labrache
Similar Messages
-
Error while creating logical port in SOAMANAGER and testing it
Hi,
When I enter WSDL Access user and password in cnfiguration tab( SOAMANAGER),Im getting error as,
Error: Error in WSDL access: Exception occurred in communication framework:Error in HTTP Framework:401Unauthorizedhttp://cryo-cell.net/Inventory/Inventory.asmx?WSDL .
if I didnt enter WSDL Access user and password in cnfiguration tab( SOAMANAGER),Im not getting error.
I continued with out giving WSDL Access user and password
I consumed the asp .net webservice, while testing it (test service consumer, SE 80) ,I got following error
after giving user id and password.
SOAP:1.007 SRT :Unsupported xstream found:
(HTTP code 401 : unautorized")
please help.
Regards,
BrahmajiHi,
tell me please wenn you run SOAMANAGER you have to apply an user Authentication or not?
If yes If the service that you want to configure is an Enterprise Service or Self-Modelled Service.
In case of Web Services Please Check again in The ICF Services under
sap/bc/srt/SAP and Check if your Service activated or not.
If you don´t have Access to SOAmanagement you can see the specified Roles hier
http://help.sap.com/saphelp_nw04s/helpdata/en/2b/07074155bcf26fe10000000a1550b0/frameset.htm
Regards
A.Labrache -
Error while creating logical port for Consumer Proxy in SOAMANGER
Hi,
While creating logical port for my consumer proxy in SOAMANGER, I am getting the error shown below
SRT Framework exception: HTTP: Current user does not have the required authorization to access the HTTP destination
I have searched in the forums but none of the answers helped me.
I have specifed my PI user ID and password and the user has the followwing roles assigned to it.
SAP_BC_WEBSERVICE_SERVICE_USER
SAP_BC_WEBSERVICE_ADMIN_TEC
SAP_BC_WEBSERVICE_CONSUMER
SAP_BC_WEBSERVICE_ADMIN
Current user in the error message refers to the PI user that i have specified or the user with which i have logged in the backend ABAP system?
Please help me reslove this issue.
Thanks and regards
Sreehari NambiarHi,
Please add the following roles as well.
SAP_BC_WEBSERVICE_ADMIN_BIZ
SAP_BC_WEBSERVICE_DEBUGGER
SAP_BC_WEBSERVICE_OBSERVER
Also make sure that you are doing the role comparison after adding all SAP* roles in your profile.
Let me know if this works?
Thanks,
Sridhar -
Error while creating logical port from WSDL in SOAMANAGER
Hi,
I am trying to create a logical port for the webservice TerritoryCRMBasicDataByIDQueryResponse_In with the WSDL
http://usciq9e.wdf.sap.corp:50077/sap/bc/srt/wsdl/sdef_TERRITORYCRMBASICDATABYIDQUERY/wsdl11/ws_policy/document?sap-client=506
In SOA Manager, I selected the proxy object and clicked on 'Create Logical Port' ,
gave the name and description for the port and set it as default.
The other settings are :
Configuration type : WSDL based configuration
WSDL base is : Via HTTP Access
Then I gave the address of the WSDL in the URL and the proper username and password. When I clicked on 'Apply Settings' I get the following error:
"Error when building binding view: Uninstantiated object "subject sidl service" in method IF_SRT_WSP_CONFIG_SIDL~CREATE_CLNT_CFG_FROM_WSDL_D of class CL_SRT_WSP_CONFIG_SIDL "
Please advise me on how to approach the problem.
Thanks,
SashiCreating logical ports is done here:
http://help.sap.com/saphelp_nwpi71/helpdata/en/44/cc8fd368c873dfe10000000a11466f/frameset.htm -
Error while creating logical port for Reporting
Hi,
In one of the training materials for Duet Enterprise, i saw the steps for creating logical port for the consumer proxy /IWTNG/CO_PXY_RECORDS_REPOSITO.
When i am trying to create the logical port, i am getting an error saying,
" SRT Framework exception: Error in WSDL access: Exception occurred in communication framework:Error in HTTP Framework:500 Native SSL error
https://<server:port>/_vti_bin/OBAFileReceiver.asmx?wsdl "
I would like to know is it really necessary to create this logical port for "Reporting Scenario" and is it not created automaticallly using the Installation Wizard??
And in case it has to be created, how to resolve this SRT framework exception?
~ Ramanath.Hi,
the consumer proxy /IWTNG/CO_PXY_RECORDS_REPOSITO was used in Duet Enterprise SP01. Now with SP02 the consume proxy /IWTNG/CO_OBAFILE_RECEIVER_SOA is created.
However, the SSL error that you are getting looks a little strange (it does not mean that there is an error, but it is worth checking):
So can you go to SOAMANAGER -> Service Administration -> Single Service Configuration. In here select "Consumer Proxy" from the "Search by", Search Pattern "/IWTNG/CO_OBAFILE_RECEIVER_SOA" and Field: Both.
You should find one entry. Select it and click "Apply Selection".
Now go to the Configurations tab. Here you should see one Logical Port with name "LOGICALPORTFORREPORTING" with Creation Type "Manually Created". In fact this logical port was created by the Wizard.
Click on Display and scroll down again. Now in the "Additional Information" tab there is a string after HTTP Destination, e.g. 0050568E3F5A1ED096F22339C44BAF83.
Copy this value and go to your SAP GUI -> Transaction SM59.
Here click on Find/Search and search for this HTTP Destination. You should find one Type G RFC Destination that has the target host of your SharePoint server and the path prefix /_vti_bin/OBAFileReceiver.asmx.
Now you can test the service. Just click on Connection Test. The result should be a HTTP Response: 200.
If not, then something went wrong with the automatic configuration and we should take another look at it (for example maybe the SSL certificate from SharePoint that was imported by the Wizard is not valid)
Regards,
Holger.
PS. Don't use the "Ping Web Service" test from SOAMANGER -- unfortunately this is not working consistently. -
Problem while creating logical port using soamanager
Hi all,
I have created a client proxy for web service from a 3rd party system.
When i am creating a logical port for the same consumer proxy i get a error as follows:
RABAX_STATE -e: UNCAUGHT_EXCEPTION
and a dump saying
" The exception 'CX_SXMLP' was raised, but it was not caught anywhere along the call hierarchy.
Since exceptions represent error situations and this error was not adequately responded to, the running ABAP program
'CL_SXMLP_FRAGMENT=============CP' has to be terminated.
Please suggest what can be done or what can be the problem.
Thanks in advance.
KomalPls go to txn SM59 and check if the RFC destination for webservice is working in the test connection.
Then go to txn LPCONFIG and create the logical port using the RFC dest. Pls mention the path suffix appropriately.
Next in your code while instantiating the client proxy pass the logical port name in the constructor (if the LP is not maintained as default).
Pls reward points if the tips are helpful. -
Error in creating Logical Port in SOAMANAGER
Hello,
I create a consumer proxy for http://www.thomas-bayer.com/axis2/services/BLZService?wsdl. No when I am trying to create a logical port I am getting SRT Exception. I am able to open the link in IE. What shall I do to solve it?
Regards,
AhmedWhat type of SRT error you are getting? post complete message.
SRT error with unsupported xstream means service provider is returning non-xml message (HTML).
Please note I am able to get wsdl of this service but not the endpoint (HTTP return code: 500) so read documentation carefully if there is any additional requirement to access this service.
Regards,
Gourav -
Unable to create logical port in SOAMANAGER
Hi All,
When Im tryign to create a logical port for my consumer proxy I get
SRT Framework exception: HTTP: Current user does not have the required authorization to access the HTTP destination.
Any clue what authrizations I need? I didnt get this error while generating the proxy from the wsdl and Im using the same userid/pwd.Hi,
Even I get the same error.
SRT Framework exception: HTTP: Current user does not have the required authorization to access the HTTP destination
I found the note : Note 1240233 - Error when maintaining logical ports using SOAMANAGER.
Applied the note, still the same error.
Have this issue is resolved?
Any other solution?
Regards,
Sunil. -
Error while determining logical Port
Hi
This is a ECC to SRM scenario:
I get this error in the Call Adapter step. I am using WS Adapter at the receiving side.
"Error while determining logical port Cannot find logical port for agreement abc and interface xyz"
Why do I get that error and any suggestions ?
Regards
HarishBaskar,
I didn't fix any issue. I was trying tofind out why the error happens. There is a proxy created at ECC side. I saw that. But target is using WS Adapter and it's that adapter which is throwing errors about logical port.
I read the blog but couldn't figure out. Does WS Adapter need proxy code? Can it work without proxy code? I don't see any proxy code for receiver WS Adapter. I was wondering whether the absence of the proxy code gave this error about logical port
Regards
Harish -
LPCONFIG Error while activating logical port
Hi
While creating logical port to a proxy class via LPCONFIG, I get the following error message
Message no. SRT_LPREG029
Configuration is valid but messages exist
I am able to save it but not able to activate it.
Please let me know the solution.
Thanks & Regards
MadhuHello Inaki.
it occurred after EHP3 upgrade on CRM 7, before it was working properly.
Thx
Matus -
Error while creating logical file using transaction FILE
Hello there,
I am facing an error while creating Logical File name definition using transaction FILE
This is the input which I'm trying to give
Logical file name: ZTEST
Name : ZTEST
Physical file : ZTEST_1<DATE><TIME>.csv
Data format: ASC
Application area: BW
Logical path:ZTEST_1_DATAOUT
when I tried to save it throws me an error like ASSIGN_SUBSTRING_NOT_ALLOWED
Please help.Hi,
Please check the OSS Notes :
Note 792061 - SP Case Locator: Dump: ASSIGN to a substring isn't allowed.
SAP Note 1297989 - Short dump ASSIGN_SUBSTRING_NOT_ALLOWED
Hope this solves the problem.
-Vikram -
Error while parsing wsdl while creating logical port
Hi all,
I have a ABAP consumer proxy created. Now I want to create a logical port in SOAMANAGER.
When parsing the wsdl, the error is:
SRT Framework Ausnahme. Fehler beim WSDL-Parsen: Fehler in Base-URI: Relative URI testtt.wsdl erfordert Angabe einer absoluten Base-URI
which is in english something like:
SRT Framework exception:Error parsing WSDL: Error in Base-URI: Relative URI requires absolute base-URI
Do you have any idea? The wsdl is very simple, just one binding, no nested schemas, no reference to https site.
Thanks in advance,
Rolf
Edited by: R.M. on Dec 1, 2011 4:54 PMFurther investigation gave SAP_note 1327511 (Limiations and common problems in ABAP WSDL processing). Did not find any problems with that.
I also checked the wsdl with the report RSSIDL_DESERIALIZE_DEMO - it's ok!
BTW, the system is of Release 700-Level 25. Here's a part of the wsdl:
<?xml version="1.0" encoding="UTF-8" standalone="no"?><wsdl:definitions xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:sch="http://domain.de/b1tt/schema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tns="http://domain.de/b1tt/schema" targetNamespace="http://domain.de/b1tt/schema">
<wsdl:types>
<schema xmlns="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified" targetNamespace="http://domain.de/b1tt/schema">
<element name="SendRequest">
<complexType>
<sequence>
<element name="name" type="string">
</element>
<element name="ordertype" type="string">
</element>
<element name="orderno" type="string">
</element>
<element name="workflow-id" type="string">
</element>
<element name="file" type="base64Binary">
</element>
<element minOccurs="0" name="signature-file" type="base64Binary">
</element>
</sequence>
</complexType>
</element>
...omitted some more elements equally defined...
</schema>
</wsdl:types>
<wsdl:message name="SendRequest">
<wsdl:part element="tns:SendRequest" name="SendRequest">
</wsdl:part>
</wsdl:message>
...omitted some more messages equally defined ...
<wsdl:portType name="TestTT">
<wsdl:operation name="Send">
<wsdl:input message="tns:SendRequest" name="SendRequest">
</wsdl:input>
<wsdl:output message="tns:SendResponse" name="SendResponse">
</wsdl:output>
</wsdl:operation>
</wsdl:portType>
</wsdl:definitions>
Edited by: R.M. on Dec 2, 2011 1:41 PM -
Error when creating Logical Port via WSDL on SOAMANAGER
Hi,
When creating Logical Port via WSDL on SOAMANAGER we're getting the following error:
"Uninstantiated object u201Csubject sidl serviceu201D in method IF_SRT_WSP_CONFIG_SIDL~CREATE_CLNT_CFG_FROM_WSDL_D of class CL_SRT_WSP_CONFIG_SIDL".
We're consuming a WS provided by a .NET application.
Our system is ECC 6.0 NW 7.01SP 7.
Anyone have faced this error before?.hI,
Please go through this link , you will get the solution
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/media/uuid/20eb3174-41ab-2a10-a383-907faf60eed3 -
Error when generating logical port in SOAMANAGER
Hi,
When generating the logical port in SOAMANAGER transaction I get an error message 'SRT Framework exception: Uninstantiated object "subject sidl service" in method IF_SRT_WSP_CONFIG_SIDL~CREATE_CLNT_CFG_FROM_WSDL_D of class CL_SRT_WSP_CONFIG_SIDL'.
Does anyone know what the problem might be?
Thans in advance.
Kind regards,
Amel AlicHi,
I, by mistake, reported the same problem; however the problem is that I referenced the WSDL without endpoint (WSDL service name....). I took this URI from Servces Registry, but was wrong (altough on the SR there were a valid binding+endpoint).
I put the right IRU pointing to the compete Service COntract (with endpoint reference), and it worked.
If you did't solve the problem, try to opern on the browser the URI you are referring to, and see, at the end if it contains the endpoint like that:
<wsdl:service name="zsMy2ndCodeFirstWebService">
<wsdl:port name="zsMy2ndCodeFirstWebServiceBinding" binding="tns:zsMy2ndCodeFirstWebServiceBinding">
<soap:address location="http://xyz:8000/sap/bc/srt/rfc/sap/.....my service operation..." />
</wsdl:port>
</wsdl:service>
Hope this help.
Regards
Roberto -
Error while creating Logical Data Object Model
Can anyone from Informatica help me on this ?
Hello Everyone , I am creating new objects in Informatica BDE 9.6.1 . While I trying to create a new Logical Data Object Model using the Customer_Order.xsd file I am getting the error : [MBCM_E0031 ]MIMB HOME directory is not valid . I do not see anything in the drop-down list for Model Type .Kindly help . RegardsSatyendra
Maybe you are looking for
-
Windows sfailed to start. Status :0xc000225 64 bit in windows 8.1
i am facing this problem 0xc000225 64 bit in windows 8.1.when i going to start my laptop at that time its give me this error message.. system say press F8 for repair ..i am trying several time but system not response any thing ...i also trying to r
-
In the develop module, when I switch to B&W treatment, my understanding was that a different set of sliders such as fill light, brightness would appear. I just see the same sliders as with color treatment. Any thoughts - Thanks
-
Good Day Experts: I have run into an error that I am unable to find information on. It is number -2028 "Associated statement is not prepared". This results when I try add a query programatically using this code: Dim sboUserQuery As SAPbobsCOM.UserQ
-
I have 100s of bookmarks that work fine on other browsers. Most are .mil, .gov., & va websites. All of which say, "The certificate is not trusted because no issuer chain was provided." in Firefox. I want to completely bypass certificate warnings with
-
Cube Compression - How it Affects Loading With Delete Overlapping Request
Hi guys, Good day to all !!! Our scenario is that we have a process chain that loads a data to infocube and that has delete overlapping step. I just want to ask how does the cube compression affects the loading with delete overlapping request. Is the