Error while creating manual planned order in apo

Dear expert
While I am creating manual planned order i am getting error as message /sapapo/rrp251
Every thing is correct BOM and PV's no error after consistency check and it getting succesfully transffered to APO and it is also visible in APO
But while creating manual planned orders planned order are not getting generated  I am using BLock planning with PPDS
Please help How to resolve it
Regards
Virender

Hi
The error message /SAPAPO/RRP251 - Error occurred while creating order means While creating an order, the system encountered problems, such as, for example, no available components or components that are available late, orders that could not be scheduled, and so on.
I think system attempted to solve the availability problems by using alternative procurement options. This was not successful. The order could not be created. Check the exceptional situations in the planning protocol, under Goto -> Planning log, and deal with the causes of the exceptional situations if this is possible or necessary.
Thanks
Amol

Similar Messages

  • Error while creating a Planned Order

    Hi SAP Experts,
    I have an error encountered while creating a Planned Order which is "Mode linkage problem with mode number".
    Diagnosis:
        An application program called an LCA routine and the following error occurred:
        An order has at least one condition with mode linkage with the same mode number. The activities of this condition must have compatible modes. The modes are compatible when each mode of one activity has a mode for the other activity with the same mode number. The first activity that violates the condition is given in the return code table in ABAP.
    Please enlighthen me what is this error and what should be done to this error.
    Thanks in advance,
    Raymond

    Check the PPM or PDS being used in the Planned Order.
    Most likely you have a Setup Activity followed by Produce Activity. However the Mode (i.e. Resource) used in the two activities are different. The same Mode needs to be used both in Setup and corresponding Produce activity.
    Hope this helps,
    somnath

  • Serial number error while creating the production order

    Hello frds,
    I am getting the following error while creating the production order.
    "Item 000000 requires exactly 100 serial numbers for the asset".
    If i give 100 serial numbers in the order, the error is solved. But i do not want to assign 100 serial numbers, i want to assign only 2 numbers.
    I have tried using the new serial number profile also, but it is giving same error.
    Kindly guide.
    Regards,
    Narendra Bora

    Dear Narendra
    Select the serial number profile and go to serialization procedure and set the ser. usage status 02 - Optional as below.
    Procd Procedure description Ser.Usage
    PPRL PP order release 02
    since the serail number creation is optional for order relase this will allow you to relase with out error and with serail number assigned in partial.
    Regards
    Soundar

  • Error while creating the sales order with billing reference

    hi alll
    i am getting error while creating the sales order with billing reference.The line items are coming in grey.I am not able to change the items as well as the quantity field.Can u guide me
    cheers
    shalsa007........

    Dear SAP SD 007
    I can confidently tell that an enhancement or an user exit has been applied in your scenario
    You have to check that
    Normally when creating a sales order with respect or referring billing documents the qty will be in editable mode and it is standard problem
    Your people has solved the standard problem by enhancement
    Usually OR--LF-PGI----F2 (SAY THE QTY IS 25 UNITS)
    Now you are creating returns order with reference to F2 in the return order type Re there is a standard issue that user can edit the qty to 30 from the original 25
    To solve this only your people have used userexit
    Line items and qty greyed out means definately there is some enhancement or user exit applied
    You have to check that
    Regards
    Raja

  • Error while creating Manual Service PO in Extended Classic Scenario

    Hi Experts,
    Extended Classic scenario (SRM 7.0 with ECC 6.0)  While Creating Manual Service PO in SRM i am getting the below mentioned error messages. Can any one suggest what could be the problem.
    Error Msgs:
    1. Backend Error:In case of account assignment, please enter acc. assignment data for item
    2. Backend Error:Purchase order still contains faulty items
    Regards,
    Mohan

    Hi,
    Yes i given all CC and GL information properly in Purchase Order Document for Service.. Still finding the error for Service PO alone.
    Pl do the needful
    Regards,
    Mohan

  • Error while creating Inspection plan

    Hi,
    While creating inspection plan in QP01, system is showing error  "Material type ZROH is not defined for task list type Q''
    Please help me to solve the error.
    Thanks
    Prasant

    Hi,
    This is due to the configuration error,
    Just use T.Code OP50
    Create an entry for task list type "Q" with material type "ZROH" and save,
    Then try creating a Quality Inspection Plan, it will work
    Regards
    Merwyn

  • Error while creating a new order on deployed cartridge

    hello all
    I have deployed "bb_ocm_demo" sample cartridge on the weblogic.
    but while creating a new order, i am getting error as below.
    An OMS Exception has been thrown. Reason: com.mslv.oms.OMSException: (Wrapped) com.mslv.oms.handler.order.cache.c
    com.mslv.oms.OMSException: (Wrapped) com.mslv.oms.handler.order.cache.c
         at com.mslv.oms.jsp.processor.RequestProcessorSupport.processRequest(Unknown Source)
         at com.mslv.oms.jsp.processor.RequestProcessorSupport.processRequest(Unknown Source)
         at com.mslv.oms.jsp.processor.RequestProcessorSupport.a(Unknown Source)
         at com.mslv.oms.jsp.processor.RequestProcessorSupport.a(Unknown Source)
         at com.mslv.oms.jsp.processor.CreateNewOrderProcessor.processRequest(Unknown Source)
         at com.mslv.oms.jsp.controller.RequestController.a(Unknown Source)
         at com.mslv.oms.jsp.controller.RequestController.processRequest(Unknown Source)
         at com.mslv.oms.jsp.controller.MainServlet.a(Unknown Source)
         at com.mslv.oms.jsp.controller.MainServlet.doProcess(Unknown Source)
         at com.mslv.oms.jsp.controller.MainServlet.doPost(Unknown Source)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
         at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
         at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
         at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
         at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
         at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
         at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
         at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
         at weblogic.work.ExecuteRequestAdapter.execute(ExecuteRequestAdapter.java:22)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    Caused By: (Wrapped) java.io.NotSerializableException: com.mslv.oms.handler.order.cache.c
         at com.tangosol.util.ExternalizableHelper.toBinary(ExternalizableHelper.java:215)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache$ConverterValueToBinary.convert(PartitionedCache.CDB:3)
         at com.tangosol.util.ConverterCollections$ConverterMap.put(ConverterCollections.java:1674)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache$ViewMap.put(PartitionedCache.CDB:1)
         at com.tangosol.coherence.component.util.SafeNamedCache.put(SafeNamedCache.CDB:1)
         at com.mslv.oms.handler.order.cache.AbstractOrderCacheManager.a(Unknown Source)
         at com.mslv.oms.handler.order.cache.AbstractOrderCacheManager.a(Unknown Source)
         at com.mslv.oms.handler.order.cache.AbstractOrderCacheManager.a(Unknown Source)
         at com.mslv.oms.handler.order.cache.AbstractOrderCacheManager.a(Unknown Source)
         at com.mslv.oms.handler.order.cache.AbstractOrderCacheManager.getOrderHistoryCacheNode(Unknown Source)
         at com.mslv.oms.handler.order.cache.AbstractOrderCacheManager.getOrderHistoryCacheNode(Unknown Source)
         at com.mslv.oms.handler.order.cache.AbstractOrderCacheManager.checkMaxInstancesExceeded(Unknown Source)
         at com.mslv.oms.handler.order.f.a(Unknown Source)
         at com.mslv.oms.handler.createorder.CreateOrderHandlerEJB.process(Unknown Source)
         at com.mslv.oms.handler.a.processRequest(Unknown Source)
         at com.mslv.oms.jsp.processor.RequestProcessorSupport.a(Unknown Source)
         at com.mslv.oms.jsp.processor.RequestProcessorSupport.processRequest(Unknown Source)
         at com.mslv.oms.jsp.processor.RequestProcessorSupport.processRequest(Unknown Source)
         at com.mslv.oms.jsp.processor.RequestProcessorSupport.a(Unknown Source)
         at com.mslv.oms.jsp.processor.RequestProcessorSupport.a(Unknown Source)
         at com.mslv.oms.jsp.processor.CreateNewOrderProcessor.processRequest(Unknown Source)
         at com.mslv.oms.jsp.controller.RequestController.a(Unknown Source)
         at com.mslv.oms.jsp.controller.RequestController.processRequest(Unknown Source)
         at com.mslv.oms.jsp.controller.MainServlet.a(Unknown Source)
         at com.mslv.oms.jsp.controller.MainServlet.doProcess(Unknown Source)
         at com.mslv.oms.jsp.controller.MainServlet.doPost(Unknown Source)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
         at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
         at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
         at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
         at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
         at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
         at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
         at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
         at weblogic.work.ExecuteRequestAdapter.execute(ExecuteRequestAdapter.java:22)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    Caused By: java.io.NotSerializableException: com.mslv.oms.handler.order.cache.c
         at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1164)
         at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:330)
         at com.tangosol.util.ExternalizableHelper.writeSerializable(ExternalizableHelper.java:2253)
         at com.tangosol.util.ExternalizableHelper.writeObjectInternal(ExternalizableHelper.java:2697)
         at com.tangosol.util.ExternalizableHelper.serializeInternal(ExternalizableHelper.java:2601)
         at com.tangosol.util.ExternalizableHelper.toBinary(ExternalizableHelper.java:211)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache$ConverterValueToBinary.convert(PartitionedCache.CDB:3)
         at com.tangosol.util.ConverterCollections$ConverterMap.put(ConverterCollections.java:1674)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache$ViewMap.put(PartitionedCache.CDB:1)
         at com.tangosol.coherence.component.util.SafeNamedCache.put(SafeNamedCache.CDB:1)
         at com.mslv.oms.handler.order.cache.AbstractOrderCacheManager.a(Unknown Source)
         at com.mslv.oms.handler.order.cache.AbstractOrderCacheManager.a(Unknown Source)
         at com.mslv.oms.handler.order.cache.AbstractOrderCacheManager.a(Unknown Source)
         at com.mslv.oms.handler.order.cache.AbstractOrderCacheManager.a(Unknown Source)
         at com.mslv.oms.handler.order.cache.AbstractOrderCacheManager.getOrderHistoryCacheNode(Unknown Source)
         at com.mslv.oms.handler.order.cache.AbstractOrderCacheManager.getOrderHistoryCacheNode(Unknown Source)
         at com.mslv.oms.handler.order.cache.AbstractOrderCacheManager.checkMaxInstancesExceeded(Unknown Source)
         at com.mslv.oms.handler.order.f.a(Unknown Source)
         at com.mslv.oms.handler.createorder.CreateOrderHandlerEJB.process(Unknown Source)
         at com.mslv.oms.handler.a.processRequest(Unknown Source)
         at com.mslv.oms.jsp.processor.RequestProcessorSupport.a(Unknown Source)
         at com.mslv.oms.jsp.processor.RequestProcessorSupport.processRequest(Unknown Source)
         at com.mslv.oms.jsp.processor.RequestProcessorSupport.processRequest(Unknown Source)
         at com.mslv.oms.jsp.processor.RequestProcessorSupport.a(Unknown Source)
         at com.mslv.oms.jsp.processor.RequestProcessorSupport.a(Unknown Source)
         at com.mslv.oms.jsp.processor.CreateNewOrderProcessor.processRequest(Unknown Source)
         at com.mslv.oms.jsp.controller.RequestController.a(Unknown Source)
         at com.mslv.oms.jsp.controller.RequestController.processRequest(Unknown Source)
         at com.mslv.oms.jsp.controller.MainServlet.a(Unknown Source)
         at com.mslv.oms.jsp.controller.MainServlet.doProcess(Unknown Source)
         at com.mslv.oms.jsp.controller.MainServlet.doPost(Unknown Source)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
         at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
         at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
         at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
         at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
         at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
         at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
         at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
         at weblogic.work.ExecuteRequestAdapter.execute(ExecuteRequestAdapter.java:22)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    please provide a solution or cause.

    It seems like a problem with the Coherence cache configuration for your installation.
    Is your installation clustered?
    Is the problem specific to this cartridge (i.e. do orders from other cartridges work well in this environment)?
    Suggest you log a problem with Oracle Support and/or try the problem in a different environment.
    Regards,
    Brian.

  • Error while creating a process order

    Dear Guru's
    While creating a process order ,i am facing an error.
    "Unable to create batch. Storage location BPSS is invalid for material 112100050
    Message no. 40116".
    How to assign specific storage loaction to that particular material.I have assigned in material master "work scheduling tab",But it was throwing an error while doing process order.Pls help me to solve this problem.
    Thanks in advance,
    Rgds,
    cherukuri

    Hi Cherukuri
    Are u using special procurement key "80"? It seems that storage location is not mentioned for the header material in the production plant.
    Maintain this using T Code MMSC. It will solve ur issue
    Rgds

  • Error while creating a Purchase Order

    Hi Friends,
    I am new to SAP MM. I am getting a problem while creating a purchase order. I created Purchase Info Record, Source List, but while creating Purchase Order, price is not picking from the purchase order. I am getting an error i.e. Net Value must be greater than 0. I checked all the settings, but getting same error.
    Could you please solve this

    Hi,
    Give some price at the item level for the item in the PO.
    And check the Pricing procedure in PO
    Hope it helps you.
    Thanks.

  • Material Listing Error while creating the sales order

    Hi Guru's
    I have mantained a material in the lisitng for A002 combiantion for SO/DC/Pric. ref. material
    While creating the sales order is throwing an error as material is not listed so the transaction is not possible.
    I have done the basic invetingation on the folowing aspects
    1)checking the material in the listing
    2)Validity periods
    3)Material not blcoked
    4)Mateial is extened for the respective sales org
    Kindly help ASAP.
    Thanks & Regards
    Tarakaram

    Dear SAP SD 007
    I can confidently tell that an enhancement or an user exit has been applied in your scenario
    You have to check that
    Normally when creating a sales order with respect or referring billing documents the qty will be in editable mode and it is standard problem
    Your people has solved the standard problem by enhancement
    Usually OR--LF-PGI----F2 (SAY THE QTY IS 25 UNITS)
    Now you are creating returns order with reference to F2 in the return order type Re there is a standard issue that user can edit the qty to 30 from the original 25
    To solve this only your people have used userexit
    Line items and qty greyed out means definately there is some enhancement or user exit applied
    You have to check that
    Regards
    Raja

  • Error while creating Maintenance Plan

    Hello,
    When I am creating a Maint Plan, I am getting error
    No packages have yet been assigned to the maintenance item 143
    Message no. IP364
    How do I solve this??
    Narendra

    Hi Narendra
    While creating Task List, for all operations u have to maintain the maintenance packages. According to the Maint. Pack only it will schedule the operations and release the order for the particulaer interval...
    under operation tab
    left side bottom conner... click it and you cna assign...
    For Creating maintenance package... TCODE : IP11
    - Pithan

  • Error while creating Quality Plan

    Dear Experts,
    While creating the Quality Plan following error is coming -"Error occured when checking type "
    In the log of task list following error is appearing - "Op. 0060, CH 0060:char. iden % used for QDI several times in task list"
    Please give your valuable suggestion onto this.
    Thanks
    Sumit

    It means you are sending down the same characteristic to an external system like LIMS more then once. 
    I believe this is a warning.  Not a hard error but I'm not 100%sure.
    Craig

  • Error while creating make -to -order

    Respected Gurus,
    I am a frequent vistor of this forum, and find it very helpful. I am studying SD processes, and came across error which is not posted on the forum.
    While configuring Make-to-order process,
    1) I have defined and assigned controlling area for my company code.
    2) In MM01 I created material master with required fields such as item category group ( 0001 - make-to-order)
    3) In VA01 I have raised an order with my material, and in the sales header>Procurement> Requirement field changed to KE.
    Now I get an error : Plant xxxx is not assigned to controlling area.
    Could you please guide me.
    Regards
    Trupti

    Thanks for the reply.
    I checked assignment of the plant to the company code, and also MRP type. Both of them are as per your suggestion.
    Not sure how, but the error i mentioned disappeared today, except another one related to FBN1.
    I have been able to process MIRO , Invoice and generate the accounting document.
    In the VA02 document flow...status of the accounting document is " Not cleared", how to go about it.
    Also if you could look in to another question I posted regarding reconcillation account, would appreciate.
    Regards
    Trupti.

  • ERROR WHILE CREATING THE SALES ORDER

    Hi,
    When creating the sales order i am entering "mode of transport"in TSW details and while trying to save it im getting a message saying "Express document "update was terminated"" recieved from the author "Rahul". If i dont enter the TSW detail while creating i am able to save the order and later in change mode i can enter the mode of transport.
    When i check the inbox, it says "definately cannot transfer message to node SMTP due to connection error".
    This is hapenning for only one user.
    What could be the problem?
    Regards,
    Rahul.

    Hi Rahul,
    I think you need to enter the mode of transport in external details where it will take for further processing. TSW is different process.
    Thanks
    Pravin

  • Co- Product Error while creating a production order

    Hi,
    While performing the Co-Products Approtionment at the time of creation of Production order..
    we are facing a problem regarding cost apportionment I have crated a Source Structure and the cost element is assigned to that Source Structure but still iam facing this issue
    kindly help me out.
    the error msg is
    Debit with cost element 9460404 cannot be settled.
    Message no. KD549
    Diagnosis
    Costs/revenues exist for cost/revenue element 9460404.  This cost/revenue element was given source assignment 40 in the source structure (-> settlement rule for sender -> parameters).  However, there is no distribution rule with settlement type FUL for this source assignment or the total of the percentages for the rules is less than 100.
    Note:
    Full settlement settles all the costs and revenues which have occurred up to the settlement period and have not already been settled. In the case of periodic settlement, you can configure the settlement profile so that all the costs occurring in the settlement period are settled, or if an amount less than 100% can be settled.
    Procedure
    Maintain the distribution rules for source assignment 40 and settlement type FUL or use periodic settlement to settle less than 100%.  Change the settlement profile for the sender as necessary.
    Change settlement profile
    Note:
    Cost and revenue elements receive source assignment " " if you have not entered a source structure in the settlement rule parameters.

    Hi Krishna Murthy I went through the note but i couldnt recive a big help from that note.
    I will explain the step by step process that i have done.
    I am attaching the Screen shots of the issue.
    1. For co-products I have created a source structure and Sec. Cost Elements were assigned in the source structure.
    2. The source structure was assigned in the Material Master for co-products equally distrubuting the amount between 2 materials.
    3. When we are trying to create a production order the error was displayed but the costs was getting calculated properly.
    4. When I was settling the production order the same error was getting displayed.
    I have tried various methods to resolve it.
    1. I have created a periodic settlement rule and tried to settle but it didnt work
    2. I have assigned the source structure in the settlement profile this also didnt work.

Maybe you are looking for

  • I am hooking up my new Time Capsule.  Can't get Ethernet to work

    I am trying to hook up the Time Capsule.  I've given up on trying to have it in series with my existing router.  I replaced the existing routher with the TC.  The Wireless seems to work (but one of our phonse wont' hold the connection). BUT, none of

  • HotSpot Tethering - Bug / Unexpected behavior

    I use the hotspot feature on my Verizon iPhone daily. I have an in-car traffic reader (on old iPhone that I've replaced) that uses WiFi to access the internet for traffic data. The iPhone 4 hotspot feature is cuasing me a problem. As near as I can te

  • My Ipod Music is locked on itunes

    I have a Shuffle and an 80 Gig ipod. On my shuffle I can delete songs that are on it. However, on the 80 gig pod the music appears locked and on the bottom of itunes it shows a small lock icon next to where it says how much free space I have. Appreci

  • I want to remove a specific noise

    Hi. To the point - I have some lectures with constant backround shaking sound. I've tried all noise/hiss reduction options, and also third party plug-ins. They help a little, but I want to try a different approach which I hope is more effective. I wa

  • Error: The listener returned the following Message: 302 Found

    Hi, I've OAS 9.0.4.0 on windows 2000 sp3 and get the message in the subject. How to solve ? Any reaction will be appreciated. Thanks in advance. Leo