Error while creating material using MMS1

Hi All ,
I am trying to create material (Material type - DIEN) using MMS1.... but its giving error as "The field Component 1 is defined as a required field; it does not contain an entry" .
Pls suggest / advice on how to correct this error ....
Thanks ,
Mridul .

hi,
i believe some finctional consultant having knowledge in MM module can easily help u out on this.
reg,
nj

Similar Messages

Error while creating stock using tcode: MB1C

Error while creating stock using tcode: MB1C
The Error is: Check table T004F:entry G006 does not exist

Hi ,
Please check the FSV (field status variant) for your company code in OBY6 .
then go to transaction code OB14 --> enter the FSV --> Check if field status group G006(Material account) is maintained there or not.
if not please maintain it.
Thanks & Regards
Anshu

Error while creating material

I got an error while creating material "Material does not exist or not activated". Can anybody help me.
BR//
Irf

hi
I think you have posted your question in wrong place.
Can you please make your question more clear.
regards!
ramesh
Edited by: Ramesh kumar.p on Feb 22, 2010 12:48 PM
Edited by: Ramesh kumar.p on Feb 22, 2010 12:50 PM

Getting error while creating subsite using custom template in sharepoint2013

Hi,
I am getting the following error while creating subsite using custom template in sharpoint2013. even publish features are enabled.
Please suggest me on this.
Thanks in advance.

You need to enable the PerformancePoint Service Site Collection Features(PPSMonDatasourceCtype)
on the target site collection. go to site action > site settings> site collections features > and enable it and now try again.
Similar case: http://imughal.wordpress.com/2012/09/20/dependency-feature-ppsmondatasourcectype-id-05891451-f0c4-4d4e-81b1-0dabd840bad4-for-feature-bicenterdataconnections-id-3d8210e9-1e89-4f12-98ef-643995339ed4-is-not-activated-at-this-scop/
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Error while creating Materialized View step 3 of 6 using wizard

have oracle 9i Rel 1 on Windows 2000 server. Master Site has been setup. Database links are created at Materialized view site. But while creating Materialized View Group using wizard there is following error on step 3 of 6.
Statement:----------------
/*OracleOEM*/ SELECT 1 FROM SYS.dba_constraints@masterdbname WHERE OWNER='username' and table_name='tabname' AND constraint_type='P'
Stack Trace:----------------
ORA-00942: table or view does not exist.
ORA-02063: preceding line from masterdbname.
All parameters for replication are correct.
Please help me early.
Thanks

Hello,
In the masterdbname, logging as sys user, you must grant select permission on sys.dba_constraints view to mvadmin_dbname user (where dbname is the replicated database name).
Regards,

Error While Creating Materialized View

Hello,
I am getting error ORA-22818: subquery expressions not allowed here while creating materialized view. I am using Oracle9i Enterprise Edition Release 9.2.0.1.0. Below pasted is my SQL Script.
Any help is highly appreciable.
Thanks
*********SQL************
select distinct(id),NAME,(select count(GRADE) from employees where
nationality like '%US%'and id=a.organization_id and grade=a.grade
group by ID,GRADE) US,(select count(GRADE) from employees where
nationality not like '%US%' and organization_id=a.organization_id and grade=a.grade
group by ORGANIZATION_ID,GRADE) NON_US,grade from employees a
where grade is not null
group by GRADE,ID,name
order by to_number(grade) desc

Hi,
This is a documented restriction on MVs. You cannot have a scalar express (i.e a select statement) in the select list.
You can get round this by joining your select count(grade).. expression in as an inline view in your FROM clause. Or you can create a normal view without the scalar expression, create your MV as a select from this view, then re-define your view to contain the query you want.
Hope that helps,
Rod West

Error while creating SR using CS_ServiceRequest_PUB.Create_ServiceRequest

Hi All,
I am getting below error while creating an SR from the backend using API 'CS_ServiceRequest_PUB'.
Error:
API Programming Error (CS_ServiceRequest_PUB.Create_ServiceRequest): An error occurred when validating the descriptive flexfield.
Additional information:Program error: Please inform your support representative that:
FLEXFIELDS SERVER-SIDE VALIDATION package reports error:
validate_desccols() exception: ORA-20005: DVLB.get_default_context() failed. SQLERRM: ORA-01403: no data found
ORA-06512: at "APPS.FND_FLEX_DESCVAL", line 931
ORA-01403: no data found
Error: ORA-06502: PL/SQL: numeric or value error: character string buffer too small
I have intialised the context as below while running the stand alone procedure in SQL Developer.
Fnd_Global.apps_initialize (user_id => 1368347,
resp_id => 21739
resp_appl_id => 514 );
We are on 11.5.10.2 and database version is 9i.
Can you please help??
TIA,
S

Hi Kesava,
I notice that in the package you used the application user_name=CHUNDUK calls the API pa_project_pub.create_project.
I wonder if you used chunduk as database user to execute the package Or you used APPS to execute the package?
The APi document states that it is a requirement to create a db username as the same name with the application username.
I have been running the problem to execute API 's delete project and try to figure what could be my problem.
TIA

Screen sequence error while creating material.

Respected Gurus,
While creating material, i am getting the following error:
The data screen descriptions are missing for screen sequence EH
(Message no. MM329)
Looks like screen set up issue.
How do I solve this??
Please help.
Jaideep

Jaideep,
Check in other logon language like EN or DE.
You might want to check with basis consultant if all text's are migrated into your logon language.
If the screens are not standard, texts might only exist in developer logon language.
Close message if solved.
regards,
Edgar

Runtime error while creating material master data

hello sir,
i am facing one prolem while creating MATERIAL MASTER DATA.
AFTER GIVING ALL REQUIRED INFORMATION WHEN I AM GOING TO SAVE THE DOCUMENT ITS SHOWING ABAP RUNTIME ERROR.
MESSAGE TYPE: - MDS_KEYMAP.
MESSAGE CLASS: 001.
PLEASE TELL ME WHAT TO DO?
REGARDS..

SIR THANK YOU FOR YOUR REPLY.
I ALREADY DONE THAT DUMP ANALYSIS.
SO PLEASE KINDLY GIVE ME IN DETAILS ABOUT THAT SOLUTION...

Error while creating Materialized View step 3 of 6

I have oracle 9i Rel 1 on Windows 2000 server. Master Site has been setup. Database links are created at Materialized view site. But while creating Materialized View Group there is following error on step 3 of 6.
Statement:----------------
/*OracleOEM*/ SELECT 1 FROM SYS.dba_constraints@masterdbname WHERE OWNER='username' and table_name='tabname' AND constraint_type='P'
Stack Trace:----------------
ORA-00942: table or view does not exist.
ORA-02063: preceding line from masterdbname.
All parameters for replication are correct.
Please help me early.
Thanks

Hello,
In the masterdbname, logging as sys user, you must grant select permission on sys.dba_constraints view to mvadmin_dbname user (where dbname is the replicated database name).
Regards,

Error while creating materialized view which using database link

Helo!
I'm getting error "ORA-00942: table or view does not exist" when I want to create materialized view.
Details:
1. On destination database I create a database link:
CREATE DATABASE LINK SDATABASE
CONNECT TO MYUSER
IDENTIFIED BY MYUSERPASS
USING 'ORCL';
=> Command "SELECT * FROM TABLE1@SDATABASE" returns data normally!
2. On source database I create MATERIALIZED VIEW LOG:
CREATE MATERIALIZED VIEW LOG
ON TABLE1
WITH PRIMARY KEY
INCLUDING NEW VALUES;
3. Now, when I want to create MATERIALIZED VIEW on destination database:
CREATE MATERIALIZED VIEW TABLE1
REFRESH FAST
START WITH SYSDATE
NEXT SYSDATE + 1/1440
WITH PRIMARY KEY
AS SELECT * FROM TABLE1@SDATABASE;
...I get error "ORA-00942: table or view does not exist"!
How is that possible if command "SELECT * FROM TABLE1@SDATABASE" returns data normally?
Thanks,
Voranc

And, I'm using Oracle 10g.
Voranc

Error while creating Routing using LSMW

Hi Guys ,
I am trying to create LSMW using Direct Input Method .
My structures are ::
RC271_DS Work center structure for direct input (for datasets)
RC27M_DS Material master view DIRECT INPUT routing for datasets
PLKO_DI_DS Header structure for direct input (for datasets)
PLPO_DI_DS Routing/item structure for direct input (for datasets.
I getting correct data from multiple flat files .
It's converting the data also .
But while executing start direct input method i am getting the followig error ....
You cannot edit the task list object with activity type
Please let me know problem guys .
Regards,
Raj

Hi Naveen,
It means you have to assign the task list type to material type ZPRD. Then it will carry its job:
The path is:
Go To-> SPRO-> IMG Activity-> Production-> Basic Data-> Routing-> General Data---> Define Material Type Assignments. T-Code: OP50
I hope it will work.
Regards,
Madhu.G

Error while creating BOM using BAPI (urgent)

Hi all,
Thanks for ur help. i am getting some error while creting a BOM using that BAPI
BAPI_MATERIAL_BOM_GROUP_CREATE.
errors are
1) Error/warning when checking the structure of the BOM group with ID =
2)Alternative does not exist for material assignment to material BAPIBOMFG1
is it mandatory to pass the bom group id to this bapi?
In bomgroup structure , i am not passing anything to BOM_GROUP field.
is it mandatory to pass this data? i am giving my coding below.plz suggest , where i am making mistake. it is urgent.
regards
pabitra
report z_bom_create
line-size 132
line-count 65
no standard page heading.
*-- DATA DECLARATION--
include <icon> .
*---Tables
tables : s076, t100, marc .
*---Types
types : begin of t_upload, " Upload file data
col1(18),
col2(10),
col3(30),
col4(12),
col5(50),
end of t_upload,
begin of t_split,
location like stpu-ebort,
end of t_split.
data:begin of i_return occurs 10.
include structure bapiret2.
data:end of i_return.
types:begin of t_item."occurs 10.
include structure BAPI1080_ITM_C.
types:end of t_item.
types:begin of t_subitem." occurs 10.
include structure BAPI1080_SUI_C.
types:end of t_subitem.
types:begin of t_header." occurs 10.
include structure BAPI1080_MBM_C.
types:end of t_header.
types:begin of t_bomgroup." occurs 10.
include structure BAPI1080_BGR_C.
types:end of t_bomgroup.
types:begin of t_variant." occurs 10.
include structure BAPI1080_BOM_C.
types:end of t_variant.
*--- Tables
data: i_upload type standard table of t_upload, " to hold data
i_upload1 type standard table of t_upload,
i_split type standard table of t_split,
i_item type standard table of t_item,
i_subitem type standard table of t_subitem,
i_header type standard table of t_header,
i_bomgroup type standard table of t_bomgroup,
i_variant type standard table of t_variant.
data: wa_upload type t_upload, " to hold file data,
wa_upload1 type t_upload, " to hold plan data,
wa_split type t_split,
wa_item type t_item,
wa_subitem type t_subitem,
wa_header type t_header,
wa_bomgroup type t_bomgroup,
wa_variant type t_variant.
data:v_matnr like mara-matnr,
v_start like sy-index,
v_count(3) type c.
*--Constants
data: c_dot type c value '.',
c_x type c value 'X',
c_comma type c value ','.
-------Selection Screen Design -
*Selection screen for input of upload file address
selection-screen skip 2.
selection-screen begin of block blk1 with frame.
parameters : p_file like rlgrap-filename obligatory .
parameters : p_matnr like mara-matnr obligatory,
p_werks like marc-werks obligatory memory id wrk,
p_stlan like afko-stlan obligatory default '1' .
selection-screen end of block blk1.
---AT SELECTION SCREEN -
at selection-screen on value-request for p_file.
*--For popup to select file.
perform f_give_help.
at selection-screen on p_matnr.
perform f_check_matnr.
-----START OF SELECTION -
*--Data upload using WS_Upload.
perform f_get_data.
perform f_get_bom_data.
perform f_get_bom_data1.
perform f_call_bapi.
*& Form f_give_help
text
--> p1 text
<-- p2 text
FORM f_give_help.
call function 'WS_FILENAME_GET'
exporting
mask = ',.,..'
mode = 'O'
importing
filename = p_file
exceptions
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
others = 5.
if sy-subrc <> 0 and not sy-msgty is initial.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
ENDFORM. " f_give_help
*& Form f_check_matnr
text
--> p1 text
<-- p2 text
FORM f_check_matnr.
CALL FUNCTION 'BAPI_MAT_BOM_EXISTENCE_CHECK'
EXPORTING
MATERIAL = p_matnr
PLANT = p_werks
BOMUSAGE = '1'
VALID_FROM_DATE =
VALID_TO_DATE =
TABLES
RETURN = i_return.
ENDFORM. " f_check_matnr
*& Form f_get_data
text
--> p1 text
<-- p2 text
FORM f_get_data.
call function 'WS_UPLOAD'
exporting
CODEPAGE = ' '
filename = p_file
filetype = 'DAT'
tables
data_tab = i_upload
exceptions
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
others = 10
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
ENDFORM. " f_get_data
*& Form f_get_bom_data
text
--> p1 text
<-- p2 text
FORM f_get_bom_data.
delete i_upload where col1 is initial.
delete i_upload where col1 cs 'ITEM'.
read table i_upload into wa_upload with key col1 = 'FINISHED GOOD:'.
if sy-subrc = 0.
v_matnr = wa_upload-col2.
if v_matnr <> p_matnr.
message e001(zl) with p_matnr.
endif.
else.
message e000(zl).
endif.
ENDFORM. " f_get_bom_data
*& Form f_get_bom_data1
text
--> p1 text
<-- p2 text
FORM f_get_bom_data1.
loop at i_upload into wa_upload where col1 CS 'FINISHED GOOD'.
v_start = sy-tabix + 1.
loop at i_upload into wa_upload1 from v_start .
if wa_upload1-col1 cs 'FINISHED GOOD'.
exit.
else.
perform f_split_upload_data.
endif.
endloop.
endloop.
ENDFORM. " f_get_bom_data1
*& Form f_split_upload_data
text
--> p1 text
<-- p2 text
FORM f_split_upload_data.
if not wa_upload1-col5 is initial.
if wa_upload1-col5 cs c_comma.
split wa_upload1-col5 at c_comma into table i_split.
loop at i_split into wa_split.
v_count = v_count + 1.
endloop.
if wa_upload1-col4 <> v_count.
wa_upload1-col4 = v_count.
endif.
clear wa_upload1-col5.
clear wa_split.
loop at i_split into wa_split.
wa_upload1-col5 = wa_split-location.
append wa_upload1 to i_upload1.
endloop.
else.
append wa_upload1 to i_upload1.
endif.
else.
append wa_upload1 to i_upload1.
endif.
ENDFORM. " f_split_upload_data
*& Form f_call_bapi
text
--> p1 text
<-- p2 text
FORM f_call_bapi.
clear wa_upload1.
wa_header-material = p_matnr.
wa_header-plant = p_werks.
wa_header-bom_usage = p_stlan.
append wa_header to i_header.
wa_bomgroup-bom_usage = p_stlan.
wa_bomgroup-created_in_plant = p_werks.
append wa_bomgroup to i_bomgroup.
wa_variant-alternative_bom = 1.
wa_variant-base_qty = 1.
wa_variant-valid_from_date = sy-datum.
append wa_variant to i_variant.
loop at i_upload1 into wa_upload1.
wa_item-item_no = wa_upload1-col1.
wa_item-item_cat = wa_upload1-col2.
wa_item-component = wa_upload1-col3.
wa_item-comp_qty = wa_upload1-col4.
append wa_item to i_item.
wa_subitem-subitem_qty = '1'.
wa_subitem-installation_point = wa_upload1-col5.
append wa_subitem to i_subitem.
endloop.
CALL FUNCTION 'BAPI_MATERIAL_BOM_GROUP_CREATE'
EXPORTING
TESTRUN = ' '
ALL_ERROR = ' '
TABLES
BOMGROUP = i_bomgroup
VARIANTS = i_variant
ITEMS = i_item
SUBITEMS = i_subitem
MATERIALRELATIONS = i_header
ITEMASSIGNMENTS =
SUBITEMASSIGNMENTS =
TEXTS =
RETURN = i_return.
if i_return[] is initial.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
*write: /'BOM created:', stpo-stlnr.
else.
*if not i_return[] is initial.
loop at i_return.
IF i_return-TYPE = 'E'.
errmsg-type = i_return-type.
errmsg-line = i_return-message.
append errmsg.
ULINE /1(108).
write:/ icon_led_RED as icon, i_return-MESSAGE.
ULINE /1(108).
ENDIF.
IF i_return-TYPE = 'W'.
errmsg-type = i_return-type.
errmsg-line = i_return-message.
append errmsg.
ULINE /1(108).
write:/ icon_led_YELLOW as icon, i_return-MESSAGE.
ULINE /1(108).
ENDIF.
ENDLOOP.
*write: / i_return-id, i_return-number, i_return-message(80).
*endloop.
*write: /'Error'.
endif.
ENDFORM. " f_call_bapi

Hi shashi,
Thanks for ur help.i tried after passing the group but it is giving same error.
i am getting the error
"Error/warning when checking the structure of the BOM group with ID= test"
i am gettig the above error when i put bomgroup-bom_group_identification = 'TEST'.
whatever i am putting in this field, the same error is comming having different value.
if i put--- bomgroup-bom_group_identification = ' '. then i will get error
"Error/warning when checking the structure of the BOM group with ID=
if i omit that field, then also , i am getting same error.
plz suggest what r the fields i need to pass for BOMGROUP structure for that bapi?
regards
pabitra

Error while posting material using transaction code MB1C

Hi Experts,
While I am trying to post material into warehouse its giving warning message initially as : MAT IS A MISS PART MRP CONTROLLER KNUITZ WILL BE NOTIFIED
MESSAGE NO: M7133
Diagnosis
Material is a missing part of plant
when I am pressing enter Its giving an error message as : MATERIAL DOES NOT EXIST IN WAREHOUSE
MESSAGE NO: L9023
All the materials that you use within a warehouse no must also be defined for this warehouse no.
Can Any one please explain me how to resolve this error in detail.
Thankyou
SAHER

Dear Siraj,
I have extended the material to warehouse numbers as you suggested. Then I got error as: WM MOVEMENT TYPE 561 IS NOT ALLOWED FOR WAREHOUSE NUMBER.
then I defined moment type in Logistic Execution -->shipping ---> picking --> Lean WM ---> Define moment types
Now its giving new error after defining the moment type for store location as: STORAGE BIN DOES NOT EXIST
MESSAGE: L9009
Thank you,
SAHER.

Error while creating Salesorder using BAPI

hello frnds,
I m new to abap and tryin to make use of BAPI_SALESORDER_CREATEFROMDAT1 to create Sales Order
I have used the progrtam below.
*& Report ZSALESBAPITRIAL
REPORT zsalesbapitrial.
TABLES : vbak , vbap.
Parameter Screen.
Sales Document Type.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
Sales document type.
PARAMETERS: p_auart TYPE vbak-auart OBLIGATORY.
Sales Organisation.
PARAMETERS: p_vkorg TYPE vbak-vkorg OBLIGATORY.
Distribution channel.
PARAMETERS: p_vtweg TYPE vbak-vtweg OBLIGATORY.
Division.
PARAMETERS: p_spart TYPE vbak-spart OBLIGATORY.
SKIP 1.
Sold to.
PARAMETERS: p_sold TYPE vbak-kunnr OBLIGATORY.
Ship to.
PARAMETERS: p_ship TYPE vbak-kunnr OBLIGATORY.
SKIP 1.
Material(Article No).
PARAMETERS: p_matnr TYPE vbap-matnr   OBLIGATORY.
Quantity (Cummulative quantity of sales Order)
PARAMETERS: p_menge type vbap-kwmeng obligatory.
Plant(Site )
parameters: p_plant type vbap-werks obligatory.
SELECTION-SCREEN END OF BLOCK b1.
Data declarations.
DATA: v_vbeln            LIKE vbak-vbeln.
DATA: header             LIKE bapisdhead1.
DATA: headerx            LIKE bapisdhead1x.
DATA: item               LIKE bapisditem OCCURS 0 WITH HEADER LINE.
DATA: itemx              LIKE bapisditemx OCCURS 0 WITH HEADER LINE.
DATA: partner            LIKE bapipartnr OCCURS 0 WITH HEADER LINE.
DATA: return             LIKE bapiret2    OCCURS 0 WITH HEADER LINE.
DATA: lt_schedules_inx   TYPE STANDARD TABLE OF bapischdlx
                         WITH HEADER LINE.
DATA: lt_schedules_in    TYPE STANDARD TABLE OF bapischdl
                         WITH HEADER LINE.
Header data
Sales document type
header-doc_type = p_auart.
headerx-doc_type = 'X'.
Sales organization
header-sales_org = p_vkorg.
headerx-sales_org = 'X'.
Distribution channel
header-distr_chan = p_vtweg.
headerx-distr_chan = 'X'.
Division
header-division = p_spart.
headerx-division = 'X'.
headerx-updateflag = 'I'.
Partner data
Sold to
partner-partn_role = 'AG'.
partner-partn_numb = p_sold.
APPEND partner.
Ship to
partner-partn_role = 'WE'.
partner-partn_numb = p_ship.
APPEND partner.
ITEM DATA
itemx-updateflag = 'I'.
Line item number.
item-itm_number = '000010'.
itemx-itm_number = 'X'.
Material
item-material = p_matnr.
itemx-material = 'X'.
Plant
item-plant    = p_plant.
itemx-plant   = 'X'.
Quantity
item-target_qty = p_menge.
itemx-target_qty = 'X'.
APPEND item.
APPEND itemx.
Fill schedule lines
lt_schedules_in-itm_number = '000010'.
lt_schedules_in-sched_line = '0001'.
lt_schedules_in-req_qty    = p_menge.
APPEND lt_schedules_in.
Fill schedule line flags
lt_schedules_inx-itm_number = '000010'.
lt_schedules_inx-sched_line = '0001'.
lt_schedules_inx-updateflag = 'X'.
lt_schedules_inx-req_qty     = 'X'.
APPEND lt_schedules_inx.
CALL FUNCTION 'BAPI_SALESDOCU_CREATEFROMDATA1'
EXPORTING
sales_header_in = header
sales_header_inx = headerx
IMPORTING
salesdocument_ex = v_vbeln
TABLES
return = return
sales_items_in = item
sales_items_inx = itemx
sales_schedules_in = lt_schedules_in
sales_schedules_inx = lt_schedules_inx
sales_partners = partner.
Check the return table.
LOOP AT return WHERE type = 'E' OR type = 'A'.
EXIT.
ENDLOOP.
IF sy-subrc = 0.
WRITE: / 'Error in creating document'.
ELSE.
WRITE: / 'Document ', v_vbeln, ' created'.
ENDIF.
but its giving 'Error in creating document' I m unable to figure wat i m missing . Is it tht i m gving wrong parameters.
Please help !!!

Does tht mean i need to add the following code
Line item number.
item-itm_number = '000010'.
itemx-itm_number = 'X'.
Material
item-material = p_matnr.
itemx-material = 'X'.
Plant
item-plant    = p_plant.
itemx-plant   = 'X'.
Quantity
item-target_qty = p_menge.
itemx-target_qty = 'X'.
APPEND item.
APPEND itemx.
For second item.
Line item number.
item-itm_number = '000020'.
itemx-itm_number = 'X'.
Material
item-material = '600020001'.
itemx-material = 'X'.
Plant
item-plant    = p_plant.
itemx-plant   = 'X'.
Quantity
item-target_qty = p_menge.
itemx-target_qty = 'X'.
APPEND item.
APPEND itemx.
Fill schedule lines
lt_schedules_in-itm_number = '000010'.
lt_schedules_in-sched_line = '0001'.
lt_schedules_in-req_qty    = p_menge.
APPEND lt_schedules_in.
Fill schedule lines
lt_schedules_in-itm_number = '000020'.
lt_schedules_in-sched_line = '0002'.
lt_schedules_in-req_qty    = p_menge.
APPEND lt_schedules_in.
Fill schedule line flags
lt_schedules_inx-itm_number = '000010'.
lt_schedules_inx-sched_line = '0001'.
lt_schedules_inx-updateflag = 'X'.
lt_schedules_inx-req_qty     = 'X'.
APPEND lt_schedules_inx.
Fill schedule line flags
lt_schedules_inx-itm_number = '000020'.
lt_schedules_inx-sched_line = '0002'.
lt_schedules_inx-updateflag = 'X'.
lt_schedules_inx-req_qty     = 'X'.
APPEND lt_schedules_inx.
But i guess it is overwritting my frst material..
Also i m gettin a error
For object rv_beleg, number range interval doesnot exist
Pls suggest

Error while creating material using MMS1

Similar Messages

Maybe you are looking for