Error while creating new release groups in PO release strategy
Hi All
I was creating a release procedure for PO and after completing steps, Create Characteristic and Create class & while creating new release grp with the class created i am not able to save it and the error message is (ME492) is" Only one release class should be used within the release groups for overall release...".
But i am able to create from an already existing CLASS and able to proceed further.( Note: I am using the training module and in the learning stage.)
Thanks for your support.
Illan
Dear,
Please follow below mention path.
*and check any things is missing, If you can go in bellow mention hints you cans create easily purchase release streatgy.*
*- Follow below mention path.*
*SPRO -> Material Management -> Purchasing -> Purchase Order -> Release Procedure for Purchase Orders.*
*Three steps involved in release process of purchase order.*
**Edit Characteristic Create characteristic for release purchase order. If you want to release purchase order on purchasing group base. So you can create characteristic for purchasing group. Take reference of CEKKO structure and BKGRP field for purchasing group in additional data of characteristic. E.g :- Purchasing group - BKGRP**
**Edit Class After creation of characteristic, create class for release purchase order. In which you can take reference of Class Type: - 032,Status: - Release,Class group: - Release strategy class,And put reference of your characteristic, which are created by you in first step.E.g: - Class - REL_PO**
*Define Release Procedure of purchase order In this step four processes involved.o Release Groupso Release Codeso Release indicatoro Release Strategies*
Now see each steps of Define release procedure of purchase order in briefly: -
Release Group In which you can define release strategy groupExa.: - Release group : - 01,Release object: - 01, Class: - REL_PO.
Release code In which you can define release code. Enter value as Release group: - 01,release code: -01 - Purchase Head,Release group: -01, release code: - 02 - Auditor
Release indicator In this step you have to define release indicator.Like X - Blocked, I - Under process, S - Release
*Release Strategy *This is the final step for release strategy.Assign release code 01, 02.Click on release prerequisites, select 02 - check box and click on continue.Click on release status button, enter release indicator X, I, S and click continueClick on classification button, enter values of purchasing group for which you want to created release strategy
Than create purchase order for purchasing group, which you assign in classification of release strategy. Enter your values of purchase order and click on check button release strategy executed in your purchase order.
Regards,
Mahesh Wagh
Similar Messages
-
Error while creating new user in Oracle 11i EBS
I am getting following error while creating new user. How solve this issue?
“Unable to load java class % specified profile option SIGNON_PASSWORD_CUSTOM. Please verify that the class exists and that it implements the java interface oracle.apps.fnd.security.PasswordValidation”.Following is the text from Note for Custom Password Validation logic:
Customers who wish to use their own password validation logic may do
so by writing their own Java classes that implement the
oracle.apps.fnd.security.PasswordValidation Java interface. The
interface requires 3 methods to be implemented:
1) public boolean validate(String user, String password)
- This method takes a username and password, and then returns true
or false, indicating whether the user's password is valid or invalid,
respectively.
2) public String getErrorStackMessageName()
- This method returns the name of the message to display when the
user's password is deemed invalid (i.e., the validate() method returns
false).
3) public String getErrorStackApplicationName()
- This method returns the application shortname for the
aforementioned error message.
After writing the Java class to perform customized password
validation, the customer must then set the value of the profile option
SIGNON_PASSWORD_CUSTOM to be the full name of the class. If, for
example, the name of the Java class is
oracle.apps.fnd.security.AppsPasswordValidation, then the value of the
SIGNON_PASSWORD_CUSTOM profile option must be
oracle.apps.fnd.security.AppsPasswordValidation. Note that AOL/J
will attempt to load this class dynamically. Hence it is necessary to
make the class accessible by AOL/J. This means that in Forms, the
class must first be loaded into the database using the loadjava
command.
You will need to apply the following patches for 11.5.1:
1344802
1363919
1472974
1351004
1377615
You will need to apply the following patches for 11.5.2:
1377615 -
Portal Runtime Error while creating new system in portal content
Hi
Can anyone solve my problem, i am geting error while creating new system in p ortal content
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.templateSelection
Component Name : com.sap.portal.admin.templateselectionwizard.default
com/sap/portal/iviewserver/cache/OClass.
Exception id: 11:29_26/12/06_0014_5891950
See the details for the exception ID in the log fileHi,
Check this link for creating system object
http://help.sap.com/bp_epv260/EP_EN/documentation/EP/N03_BB_InstallGuide_EN_US.doc
Regards
Arun -
SBO0001 error DBD:ORA12154 error while creating new connection
Dear All,
I have installed XIR3 on a windows 64 bit with oracle 10g R2 client.
The CMS is up and running and I am able to connect to the infoview and view the lsit of all the migrated objects from BOXIR2.
But, when I am trying to create a new connection for the universe or trying to execute the existing reports i am getting the following error.
(i.e I guess BO is unable to connect to DB)
*SBO0001 error DBD:ORA12154 error while creating new connection
I tried various solution from BOB but still could not solve this. Please anyone suggest few tips regarding this case
Business objects: CMS is running and able to connect to infoview and able to log on to CMC
Database client: Able to log on to DB using sqlplus and tnsping is working.
the details of the software are as follows
*BO Server configuration
OS: Windows Server 2008 R2 64 bit
Business Objects XI R3 3.0
Oracle client 10gR2 32 bit
*Database server configuration
Oracle 11g R2 64 bit
Thanks,
MikeMike :
I am having a similar issue with the BOE and Oracle.
Can you please provide details of which Oracle client you ended-up using..?
32-bit or 64-bit...?
Oracle client version...?
Specific client patches applied..?
Thanks,
Mark -
Fiori Error while creating catalog and Group in Fiori Launchpad
Hi ,
We are getting following error while creating Catalog and Groups in Fiori Launchapd:
Error (500, Internal Server Error) in OData response for GET "/sap/opu/odata/UI2/TRANSPORT/CustomizingRequests?$filter=isDefaultRequest%20eq%20true": HTTP request failed
Details: Model 'ZTRANSPORT_MODEL_0001_BE' contains errors. Contact Adminstrator
Regards,
Trilochan
Message was edited by: Michael ApplebyHi Trilochan,
Have you assigned transport request? Select the config icon at right top.
Creating Transport Requests for User Changes - User Interface Add-On for SAP NetWeaver - SAP Library
Also look at SAP Fiori - UI Add-on SP09 update troubleshooting
Regards, Masa
SAP Customer Experience Group - CEG -
Error while creating the product group by MC84
Hello Friends,
I am creating the product group by MC84, and in product group field i have given the product group name i.e P2345, and its description i.e product group for waluj, plant i.e cw01 and Base unit i.e KG.Now when i press enter system is throwing the error"The field is defined as the required field;it doesnot contain an entry."Message no.MG144.And with this error system is placing the cursor on product group field.As i have already given product group name than also system is throwing the error.
Though i know the alternative method to create product group by MMO1 and selecting the material type PROD, then also i want to know why system is throwing the error while creating the product group by MC84.
Please guide.Dear,
This message says that you have not entered a mandatory field.Enter proper values for all mandatory fields and then you will not get this error.
Try to create the product group as material of material type"PROD"
Then you go on adding the memebers in SOP Transaction.
In some of the versions of SAP it is the problem.
I have also faced this problem in some versions.
Regards,
R.Brahmankar -
RUNTIME ERROR WHILE CREATING NEW SYSTEM IN EP6
Hi
Can anyone solve my problem, i am geting error while creating new system PORTAL FOR to connect biw 3.5 system
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.templateSelection
Component Name : com.sap.portal.admin.templateselectionwizard.default
com/sap/portal/iviewserver/cache/OClass.
Exception id: 11:29_26/12/06_0014_5891950
See the details for the exception ID in the log file
thanks in advance
Rockhi,
check the log file and let me the the error.
manish -
PDF Error while creating New PCR
Hi All,
i am getting belolw error while creating new PCR, it suppose to open PDF but with out opening it is giveing following error.
The initial exception that caused the request to fail, was:
com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (401) Unauthorized. The requested URL was:"http://localhost:50000/AdobeDocumentServices/Config?style=document"
com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRuntimeException: Failed to UPDATEDATAINPDF
Request you guide me to resolve this problem
Thanks,
Srinivasu.YHello Srinivasu,
It seems your Adobe configuration is not correct. Please use SAP note 944221 for troubleshooting.
Also go through online help documentation-
http://help.sap.com/erp2005_ehp_04/helpdata/en/2f/d7844205625551e10000000a1550b0/frameset.htm
Configuration: Business Package for Manager Self-Service->Configuring Adobe Document Services
Regards
Pooja -
ERROR :APP-PER-289381 While Creating New Business Group
Hello,
When i am creating new business group in new fresh implementation i am find this error.
APP-PER-289381: A business group with this name exists. Please enter a different name.
I have only Default business group: 'Setup Business group'
Please can any provide a solution for this.. Your early response will highly appreciated.
Thanks
MohsinHi Mohsin,
whatever name you are trying just run the below query to check if it already exists or not.
select * from apps.per_business_groups where name = 'Give here the name you are tyring'
If this returns any row means name already exist in deed. You can rename the existing business group and then create new on. However, if name doesnt exist, wait for any other reply in the forum.
Thanks,
Avinash -
Error while creating new crosstab using
I am getting the following error while creating a new crosstab object within Swing application. This error has started coming after we applied Oracle patch 9206 on database. The error originates from one of the classes in the olap_api_92.jar.
==========================================================
Wed Feb 02 09:13:51 CST 2005 In BuilderWizardValidateAdapter::wizardValidatePage
oracle.express.idl.util.OlapiException: No more data to read from socket
at oracle.express.idl.ExpressOlapiDataSourceModule.DefinitionManagerInterfaceStub.crtCurMgrs2(DefinitionManagerInterfaceStub.java:927)
at oracle.express.olapi.data.full.DefinitionManagerSince9202.createOLAPICursorManagers(DefinitionManagerSince9202.java:611)
at oracle.express.olapi.data.full.ExpressDataProvider.createCursorManagers(ExpressDataProvider.java:1325)
=========================================================
Please check the BIcheckconfig output. It does not show any errors.
=========================================================
<?xml version="1.0" encoding="UTF-8" ?>
<BICheckConfig version="1.0.2.0">
<Check key="JDEV_ORACLE_HOME" value="C:\Mohan\Installs\Jdev904"/>
<Check key="JAVA_HOME" value="C:\Mohan\Installs\Jdev904\jdk"/>
<Check key="JDeveloper version" value="9.0.4.0.1419"/>
<Check key="BI Beans release description" value="BI Beans 9.0.4 Production Release"/>
<Check key="BI Beans component number" value="9.0.4.23.0"/>
<Check key="BI Beans internal version" value="2.7.5.32"/>
<Check key="host" value="db03schgefage"/>
<Check key="port" value="1521"/>
<Check key="sid" value="biolapp"/>
<Check key="user" value="nairs5"/>
<Check key="Connecting to the database" value="Successful"/>
<Check key="JDBC driver version" value="9.2.0.4.0"/>
<Check key="JDBC JAR file location" value="C:\Mohan\Installs\Jdev904\jdev\lib\patches"/>
<Check key="Database version" value="9.2.0.6.0"/>
<Check key="OLAP Catalog version" value="9.2.0.6.0"/>
<Check key="OLAP AW Engine version" value="9.2.0.6.0"/>
<Check key="OLAP API Server version" value="9.2.0.6.0"/>
<Check key="BI Beans Catalog version" value="N/A; not installed in nairs5"/>
<Check key="OLAP API JAR file version" value="9.2"/>
<Check key="OLAP API JAR file location" value="C:\Mohan\Installs\Jdev904\jdev\lib\ext"/>
<Check key="OLAP API Metadata Load" value="Successful"/>
<Check key="Number of metadata folders" value="3"/>
<Check key="Number of metadata measures" value="569"/>
<Check key="Number of metadata dimensions" value="5"/>
<Check key="OLAP API Metadata">
<![CDATA[==============================================================================
Type Name (S=Schema, C=Cube, M=Measure, D=Dimension)
========= ====================================================================
Folder... ROOT
Folder... Auto Claim Measures
Folder... Service Measures
Folder... Claim Counts
Folder... Cell Summary Cube
Folder... Actual Measures
Measure.. Actual Acceptance Rate
Measure.. Actual Annualized Bill amt
Measure.. Actual Application Count
Measure.. Actual Avg Annual Billing
Measure.. Actual Contacts Count
Measure.. Actual Commission Amt
at oracle.express.olapi.data.full.ExpressDataProvider.internalCreateCursorManager(ExpressDataProvider.java:680)
at oracle.express.olapi.data.full.ExpressDataProvider.createCursorManager(ExpressDataProvider.java:586)
at oracle.olapi.data.source.DataProvider.createCursorManager(DataProvider.java:268)
at oracle.dss.dataSource.QueryUtilities.setUpCursors(QueryUtilities.java:559)
at oracle.dss.dataSource.QueryServer._setUpCursorsForMainQuery(QueryServer.java:7039)
at oracle.dss.dataSource.QueryServer._getCursorForCube(QueryServer.java:4098)
at oracle.dss.dataSource.QueryServer._updateCube(QueryServer.java:4055)
at oracle.dss.dataSource.QueryServer._applySelections(QueryServer.java:2661)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at oracle.dss.util.Operation.execute(Operation.java:69)
at oracle.dss.dataSource.OperationQueue.update(OperationQueue.java:68)
at oracle.dss.dataSource.common.BaseOperationQueue.addOperation(BaseOperationQueue.java:176)
at oracle.dss.dataSource.common.BaseOperationQueue.addOperation(BaseOperationQueue.java:146)
at oracle.dss.dataSource.QueryServer.queueOperation(QueryServer.java:7076)
at oracle.dss.dataSource.QueryServer.applySelection(QueryServer.java:2192)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at oracle.dss.util.Operation.execute(Operation.java:69)
at oracle.dss.dataSource.QueryManagerServer.sendQueue(QueryManagerServer.java:1549)
at oracle.dss.dataSource.common.OperationQueue.update(OperationQueue.java:198)
at oracle.dss.dataSource.common.BaseOperationQueue.addOperation(BaseOperationQueue.java:176)
at oracle.dss.dataSource.common.BaseOperationQueue.addOperation(BaseOperationQueue.java:146)
at oracle.dss.dataSource.common.OperationQueue.addOperation(OperationQueue.java:127)
at oracle.dss.dataSource.client.QueryClient.applySelection(QueryClient.java:970)
at oracle.dss.dataSource.common.QueryQueryAccess$SelCursor.getDataAccess(QueryQueryAccess.java:1133)
at oracle.dss.dataSource.common.QueryQueryAccess.getDataAccess(QueryQueryAccess.java:278)
at oracle.dss.datautil.QueryAccessUtilities._getValues(QueryAccessUtilities.java:639)
at oracle.dss.datautil.QueryAccessUtilities._getValues(QueryAccessUtilities.java:705)
at oracle.dss.datautil.QueryAccessUtilities.getValues(QueryAccessUtilities.java:608)
at oracle.dss.queryBuilder.QueryBuilderUtils.getSelectedMeasures(QueryBuilderUtils.java:623)
at oracle.dss.queryBuilder.SelectedItemsPanel.populateTree(SelectedItemsPanel.java:298)
at oracle.dss.queryBuilder.SelectedItemsPanel.refreshTree(SelectedItemsPanel.java:333)
at oracle.dss.queryBuilder.SelectedItemsPanel.setActive(SelectedItemsPanel.java:366)
at oracle.dss.queryBuilder.ItemsPanel.setActive(ItemsPanel.java:251)
at oracle.dss.datautil.gui.DefaultBuilderDialog.setActive(DefaultBuilderDialog.java:1072)
at oracle.dss.datautil.gui.DefaultBuilderDialog.validateNextPreviousEvent(DefaultBuilderDialog.java:1396)
at oracle.dss.datautil.gui.DefaultBuilderDialog$BuilderWizardValidateAdapter.wizardValidatePage(DefaultBuilderDialog.java:2113)
at oracle.bali.ewt.wizard.WizardPage.processWizardValidateEvent(Unknown Source)
at oracle.bali.ewt.wizard.WizardPage.validatePage(Unknown Source)
at oracle.dss.datautil.gui.CustomImageWizardPage.validatePage(CustomImageWizardPage.java:81)
at oracle.bali.ewt.wizard.BaseWizard.validateSelectedPage(Unknown Source)
at oracle.bali.ewt.wizard.BaseWizard.doNext(Unknown Source)
at oracle.dss.datautil.gui.CustomWizard.doNext(CustomWizard.java:415)
at oracle.bali.ewt.wizard.BaseWizard$Action.actionPerformed(Unknown Source)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1786)
at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:1839)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:245)
at java.awt.Component.processMouseEvent(Component.java:5100)
at java.awt.Component.processEvent(Component.java:4897)
at java.awt.Container.processEvent(Container.java:1569)
at java.awt.Component.dispatchEventImpl(Component.java:3615)
at java.awt.Container.dispatchEventImpl(Container.java:1627)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
at java.awt.Container.dispatchEventImpl(Container.java:1613)
at java.awt.Window.dispatchEventImpl(Window.java:1606)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:141)
at java.awt.Dialog$1.run(Dialog.java:540)
at java.awt.Dialog.show(Dialog.java:561)
at java.awt.Component.show(Component.java:1133)
at java.awt.Component.setVisible(Component.java:1088)
at oracle.bali.ewt.wizard.WizardDialog.runDialog(Unknown Source)
at oracle.dss.datautil.gui.DefaultBuilderDialog.runDialog(DefaultBuilderDialog.java:489)
at oracle.dss.datautil.gui.DefaultBuilderDialog.run(DefaultBuilderDialog.java:466)
at oracle.dss.queryBuilder.QueryBuilder.run(QueryBuilder.java:2401)
at gecf.pmg.PmgBiOlapApp.newCrosstabWiz(PmgBiOlapApp.java:1622)
at gecf.pmg.PmgBiOlapApp.mNewCrosstab_ActionPerformed(PmgBiOlapApp.java:1563)
at gecf.pmg.PmgBiOlapApp$5.actionPerformed(PmgBiOlapApp.java:696)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1786)
at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:1839)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:245)
at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:231)
at java.awt.Component.processMouseEvent(Component.java:5100)
at java.awt.Component.processEvent(Component.java:4897)
at java.awt.Container.processEvent(Container.java:1569)
at java.awt.Component.dispatchEventImpl(Component.java:3615)
at java.awt.Container.dispatchEventImpl(Container.java:1627)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
at java.awt.Container.dispatchEventImpl(Container.java:1613)
at java.awt.Window.dispatchEventImpl(Window.java:1606)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)I suspect that you have either not fully applied the patch or alternatively the patching process did not complete.
If you are using an analytic workspace, connect as OLAPSYS account and run the following commands:
exec CWM2_OLAP_METADATA_REFRESH.MR_REFRESH
exec CWM2_OLAP_METADATA_REFRESH.MR_AC_REFRESH
If this does not resolve the error, and assuming your system worked prior to applying the 9206 patch, then the patch may need to be reapplied.
Hope this helps
Business Intelligence Beans Product Management Team
Oracle Corporation -
Error while creating MV replication group object
Hi,
I am getting error while creating replication group object. I tried to create using OEM and SQLPlus
OEM error
This error while creating M.V. rep. group object
There is a table or view named SCOTT.EMP.
It must be dropped before a materialized view can be created.
In SQLPLUS
SQL> CONNECT MVIEWADMIN/MVIEWADMIN@SWEET
Connected.
SQL>
SQL> BEGIN
2 DBMS_REPCAT.CREATE_MVIEW_REPOBJECT (
3 gname => 'SCOTT',
4 sname => 'KARTHIK',
5 oname => 'emp_mv',
6 type => 'SNAPSHOT',
7 min_communication => TRUE);
8 END;
9 /
BEGIN
ERROR at line 1:
ORA-23306: schema KARTHIK does not exist
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 2840
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 773
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 5570
ORA-06512: at "SYS.DBMS_REPCAT_SNA", line 82
ORA-06512: at "SYS.DBMS_REPCAT", line 1332
ORA-06512: at line 2
Please not already I have created KARTHIK schema.Arthik,
I think I know what may have happened.
As I can see you are trying to create support for an updateable materialized view.
You have to make sure the name of the schema that owns the materialized view is the same as the schema owner of the master table (at master site).
From the code you have shown, I bet the owner of table EMP is SCOTT.
From the other hand, you want to create materialized view EMP_MV under schema KARTHIK that refers to table SCOTT.EMP at master site.
According to the documentation, the schema name used in DBMS_REPCAT.CREATE_MVIEW_REPOBJECT must be same as the schema that owns the master table.
Please check the documentation at the link below
http://download.oracle.com/docs/cd/B19306_01/server.102/b14227/rarrcatpac.htm#i109228
I tried to reproduce your example in my environment, and I got exactly the same error which actually confirms my assumption that the reason for the error is the fact that you tried to create the materialized view in a schema with different name than the one where master table exists.
I'll skip some of the steps that I used to create the replication environment.
I have two databases, DB1.world and DB2.world
On DB2.world I will generate replication support for table EMP which belongs to user SCOTT
SQL> conn scott/*****@DB2.world
Connected.
SQL>create materialized view log on EMP with primary key;
Materialized view log created.
SQL>
SQL>conn repadmin/*****@DB2.world
Connected.
SQL>BEGIN
2 DBMS_REPCAT.CREATE_MASTER_REPGROUP(
3 gname => 'GROUPA',
4 qualifier => '',
5 group_comment => '');
6* END;
PL/SQL procedure successfully completed.
SQL>BEGIN
2 DBMS_REPCAT.CREATE_MASTER_REPOBJECT(
3 gname => 'GROUPA',
4 type => 'TABLE',
5 oname => 'EMP',
6 sname => 'SCOTT',
7 copy_rows => TRUE,
8 use_existing_object => TRUE);
9* END;
10 /
PL/SQL procedure successfully completed.
SQL> BEGIN
2 DBMS_REPCAT.GENERATE_REPLICATION_SUPPORT(
3 sname => 'SCOTT',
4 oname => 'EMP',
5 type => 'TABLE',
6 min_communication => TRUE);
7 END;
8 /
PL/SQL procedure successfully completed.
SQL>execute DBMS_REPCAT.RESUME_MASTER_ACTIVITY(gname => 'GROUPA');
PL/SQL procedure successfully completed.
SQL> select status from dba_repgroup;
STATUS
NORMAL Now let's create updateable materialized view at DB1. Before that I want to let you know that I created one sample in DB1 user named MYUSER. MVIEWADMIN is Materialized View administrator.
SQL>conn mviewadmin/****@DB1.world
Connected.
SQL> BEGIN
2 DBMS_REFRESH.MAKE(
3 name => 'MVIEWADMIN.MV_REFRESH_GROUPA',
4 list => '',
5 next_date => SYSDATE,
6 interval => '/*1:Hr*/ sysdate + 1/24',
7 push_deferred_rpc => TRUE,
8 refresh_after_errors => TRUE,
9 parallelism => 1);
10 END;
11 /
PL/SQL procedure successfully completed.
SQL> BEGIN
3 DBMS_REPCAT.CREATE_SNAPSHOT_REPGROUP(
5 gname => 'GROUPA',
7 master => 'DB2.wolrd',
9 propagation_mode => 'ASYNCHRONOUS');
11 END;
12 /
PL/SQL procedure successfully completed.
SQL>conn myuser/*****@DB1.world
Connected.
SQL>CREATE MATERIALIZED VIEW MYUSER.EMP_MV
2 REFRESH FAST
3 FOR UPDATE
4 AS SELECT EMPNO, ENAME, JOB, MGR, SAL, COMM, DEPTNO, HIREDATE
5* FROM [email protected];
Materialized view created.
SQL>conn mviewadmin/******@DB1.world
Connected.
SQL> BEGIN
2 DBMS_REFRESH.ADD(
3 name => 'MVIEWADMIN.MV_REFRESH_GROUPA',
4 list => 'MYUSER.EMP_MV',
5 lax => TRUE);
6 END;
7 /
PL/SQL procedure successfully completed.And now lets run CREATE_MVIEW_REPOBJECT.
SQL> BEGIN
2 DBMS_REPCAT.CREATE_MVIEW_REPOBJECT(
3 gname => 'GROUPA',
4 sname => 'MYUSER',
5 oname => 'EMP_MV',
6 type => 'SNAPSHOT',
7 min_communication => TRUE);
8 END;
9 /
BEGIN
ERROR at line 1:
ORA-23306: schema MYUSER does not exist
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 2840
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 773
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 5570
ORA-06512: at "SYS.DBMS_REPCAT_SNA", line 82
ORA-06512: at "SYS.DBMS_REPCAT", line 1332
ORA-06512: at line 3 I reproduced exactly the same error message.
So the problem is clearly in the schema name that owns the materialized view.
Now lets see if what would happen if I create the MV under schema SCOTT which has the same name as the schema on DB2.world where the master table exists.
SQL>conn scott/****@DB1.world
Connected.
SQL>CREATE MATERIALIZED VIEW SCOTT.EMP_MV
2 REFRESH FAST
3 FOR UPDATE
4 AS SELECT EMPNO, ENAME, JOB, MGR, SAL, COMM, DEPTNO, HIREDATE
5* FROM [email protected];
Materialized view created.
SQL>conn mviewadmin/******@DB1.world
Connected.
SQL> BEGIN
2 DBMS_REFRESH.ADD(
3 name => 'MVIEWADMIN.MV_REFRESH_GROUPA',
4 list => 'SCOTT.EMP_MV',
5 lax => TRUE);
6 END;
7 /
PL/SQL procedure successfully completed.And now lets run CREATE_MVIEW_REPOBJECT.
SQL> BEGIN
2 DBMS_REPCAT.CREATE_MVIEW_REPOBJECT(
3 gname => 'GROUPA',
4 sname => 'SCOTT',
5 oname => 'EMP_MV',
6 type => 'SNAPSHOT',
7 min_communication => TRUE);
8 END;
PL/SQL procedure successfully completed.As you can see everything works fine when the name of the schema owner of the MV at DB1.world is the same as the schema owner of the master table at DB2.world .
-- Mihajlo
Message was edited by:
tekicora -
Error While creating a Product Group
Dear All;
When running MRP, we would like to run it for specific materials only.
To do so, we need to group the materials in product groups.
While creating a product Group using T.code MC84, i get an error message
"The field is defined as a required field; it does not contain an entry
Message no. MG144"
Kindly advise me on how to resolve this.
Regards;
Richard.Hi,
Refer below OSS note:
Note 621753 - MC84: Error message when creating product group & it's related ones.
Regards,
Ram -
Error while creating a product group--Batch input error 9
Hi,
While creating a product group in T-code MC84, getting the error message" Product group can not be created (Batch input error 9)". Would appreciate providing yr help to resolve above issue.
Thks,
NileshHi Neel,
As ponited by you, the material type "PROD" is realted with creation of product group.I am able to resolve the error, "actually the work schedulling & MRP views were not activated for "PROD" resulting in the above error.
Thks for yr help.
Regards,
Nilesh -
Error while creating new tab/user...
hi there ...
I have this error while creating using this <a href="http://https://www.sdn.sap.com/irj/sdn/message?messageID=3171191">https://www.sdn.sap.com/irj/sdn/message?messageID=3171191</a>
that i have posted for help...
I have encountered this error
"Error occurred while trying to access desktop: "portal_content/every_user/general/defaultDesktop". The object does not exist or you are not authorized to access it. If this problem persists, contact your system administrator."
I never tried to create anything new inside the EP so i have encountered this as the 1st error ...
Can anyone help me?? or have encountered this prob as well? do u have any solutions to it??
Thanks loads
QuatreHello quatre,
The error seems to be due to the fact that your default desktop has been
corruptd or maybe deleted or this could be jst a permission isuue .
For restoring the desktop pls try this ,Access the Master rule collection ,
Try this url for the display rules.Login with admin and restore your desktop.
http://<host>:<port>/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fadministrator!2fsystem_admin!2fsystem_admin_role!2fcom.sap.portal.system_admin_ws!2fcom.sap.portal.themes!2fcom.sap.portal.portalDisplayRules
Assign the restored desktop to your user id.
<b>Or this could be just a permission issue.
<i>See the permission for default framework and defaultdesktop ,
assign everyone to read permission</i></b>
Hope this helps you
Regards
Vineeth -
Error While creating new project
Hi,
I am getting the following error while creating and saving the new Project in the customized project types. If I create any project in the standard project type 'Development Projects' , I could save the project(No error). I checked all the customisation. But I could not understand the problem.
Error type:
Error when processing your request
What has happened?
The URL http://xxxxxxx.com:8000/sap/bc/webdynpro/sap/cprojects/ was not called due to an error.
Note
The following error text was processed in the system QAR :
Access via 'NULL' object reference not possible.
The error occurred on the application server jkeccdq_QAR_01 and in the work process 3 .
The termination type was: RABAX_STATE
The ABAP call stack was:
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system QAR in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server jkeccdq_QAR_01 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 3 in transaction ST11 on the application server jkeccdq_QAR_01 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 200 -u: -l: E -s: QAR -i: j_QAR_01 -w: 3 -d: 20080630 -t: 150706 -v: RABAX_STATE -e: OBJECTS_OBJREF_NOT_ASSIGNED
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Pls Help me to solve this issue.
Thanking you
Regards,
N.Ramesh.
+91-9958755695Have you checked if you assigned in the project type the project category?
There is a simple check to see if there is something wrong on the customizing of the project types:
Copy a standard project type and change only the project type ID. Check if you can create a project from this new project type
Hope this helps
Neil
Maybe you are looking for
-
Computer won't play music thru itunes, CD's nor library???
itunes will not play anything, and my computer won't play CD's either. It's like it doesn't even recogonize that there is a CD in the drive. I checked and the driver seems to be there in the list of programs, but it won't work. can't import CD's to i
-
Installing Windows XP via Fusion on MBPro w/h retina
I was about to install Windows XP on VMWare Fusion on my MacBook Pro when it asked me to format the hard driver partition in NTFS. Is it ok to do so? Wouldn't that mess up the current OSx file system on the hard drive (or solid state drive in that ma
-
GROUP BY GROUPING SETS for a selected month and for year to date
Below is a code example to demonstrate this question: declare @test table (ID int, Quantity int, Day date); insert into @test values (4, 500, '1/18/2014'), (4, 550, '1/28/2014'), (7, 600, '1/10/2014'), (7, 750, '1/11/2014'), (7, 800, '1/20/2014'), (1
-
Windows mobile 6.1 & adobe reader with zoom?
i need a reader that will allow me to zoom in on my documents, the current reader that's on my phone won't allow me to do this, which makes it pretty darn useless. if i can't zoom in on my docs, i can't read them because the text is too small... phon
-
Hi All, Can I re-install OWB 11g on existing database ? Thanks