Error while creating Partner Profile

Hi.
While generating the Partner profile for the distribution model
The following error is coming :
Outbound parameters for message type CREMAS CREMAS04 could not be created
Please enter a valid value for the output mode
Outbound parameters for message type SYNCH SYNCHRON could not be created
Please enter a valid value for the output mode.
Furher while processing the Idoc its giving the error 'Entry not found in outbound table'.
Kindly help in resolving the error.
Thank u in advance.
Pranali.

Hello Prashant,
You are missing some configuration for the partner function;
Go- to
SPRO>IMG>QM>Quality Notifications>Notification Creation>Partners>Define partner Determination Procedure>
Again Select "Define Partner Determination Procedure".
Select Quality management> Change Partner
Now Select Q2.
Compare settings with Partner Determination Procedure on any other client. Also check Partner functions on the same screen.
Amol.

Similar Messages

While creating partner profile, if the partner type is u0093LIu0094 what r the sett

While creating partner profile, if the partner type is LI what r the settings we need to configure?

Hi Chiru,
For a IDOC to File scenario, just follow these steps:-
SLD-
1) Create a Product/Software Component
2) Technical System pointing to R/3 system
3) Business System for the above technical system
In the Repository
1) Import the Software component created in the sld
2) Create a namespace,
3) import the idoc and then create sender data type/message type etc and mapping
4) Mapping Rules is depends on the requirement
In the Directory
1) Create a Scenario /import the business system
2) Create Receiver/Interface determination
3) Create communication channels for sender and receiver
4) Sender Agreeement and Receiver Agreement.
Then the file adapter configuration is depend on the input file format.
Also you need to have Logical destionation created in the XI , and the IDX1 entry
In R/3 Port, Partner profiles etc should be created
Have a look into this document~
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/877c0d53-0801-0010-3bb0-e38d5ecd352c
In addition do the following in XI:
1. SM 59 - Create RFC destination pointing to R3.
2. IDX1 - Create a port for R3
3. IDX2 - Import IDOC metadata.
I hope this provides you a solution.
Regards.
Praveen

Error while creating Partner Product Ranges

HI All,
I am working on Mobile Sales For handhelds module. I have created PPR types and now creating three PPRs:
ZHH_USERS                   PPR for Users
ZHH_Accounts                 PPR for accounts
ZHH_Products                  PPr for products
While creating the PPR (crmm_ppr transaction) , what is the Item tab? what values need to be fillled in the fields: Item Selection and ID/ Description? Right now I do not have any values in the drop down menu. Where and what do I need to configure? What is the purpose of this configuration?
I am gettign an error : field 'PROCESS_QTY_UNIT' is not defined for PPR type 'PRP_BUPA_I' / 'ZHHU'/RefType1'!
Please explain the meaning of this error.
Thank You
Rucha Atre

Have you checked your config settings.
Search for "Permissible Partner Roles per Account Group" in SPRO
Make sure the vendor account that you are creating is using an account group that has your new partner in it.

Error while generating Partner profiles

Hi,
I am not able to crate the Partner profile. When I try to Generate the Partner Profiles from the Distribution model (Masterial Master) it give me following error,
"Outbound parameters for message type MATMAS MATMAS05 could not be created
Please enter a valid value for the output mode
Outbound parameters for message type SYNCH SYNCHRON could not be created
Please enter a valid value for the output mode"
Can anybody tell me how to solve this problem??
Thanks in stack.

How did you try to generate the Partner profile?
Can you pls try the following...
execute report "RBDCUS15" and give the model view/partner for which the entries needs to be generated.
Also, give the appropriate values for "Outbound Parameters" like version, packet size and output mode.
Thanks,
Renjith

Error while creating Blogger profile

Hi Friends,
Can any one help me on this.
The below is the error message.
"Could not process form The following fields are required.
The URL must point at the Wiki: https://wiki.sdn.sap.com/wiki/display/... Please check the URL and correct as necessary. "
Can any one help me to know how to post a blog on SDN.
Regards
Devraj

Hi Sridhar,
Could you please tell you are on which SP of Netweaver Mobile 7.10?
Have you already followed all the steps in the Installation Guide for SAP Netweaver Mobile 7.1 and applied the required kernel and support packages in your SAP system, as per the documentation in the link below:
https://websmp109.sap-ag.de/installNWmobile71
I don't see any other reason why you are unable to see the SAP_DOE* roles in SU01 or PFCG transactions.
Please verify.
Best Regards,
Kranti

Error while creating Rough cut planning profile

Facing the following error while creating rough cut planning profile (mc35) in SOP for product group. "Work center x plant y does not exist for task list type 3". pls advise- do i need to create tsk list for product group? pls advise with tcode to be used.

pls check the (task list ) usage you have maintained in the Work center.
In OP45 , pls ensure that for the usage ,
task list type 3 (Rough cut planning profile) is included.
If it is not included there , pls include the TL type 3 for your usage and now the prob will get solved.
Regards.,
Sheik

Error while creating rough cut plannin profile using Info structure

Hi,
I got the following error while creating rough cut planning profile for Info structure,
Capacity planning is not possible for this info structure S504
Message no. MA489
Diagnosis
In the planning parameters for info structure S504, no key figure for capacity planning has been entered.
Procedure
If you want to capacity planning to be possible for this info structure, you need to enter a capacity key figure in the planning parameters for the info structure in the Implementation Guide.
The info structure which i used here is created by me. Can any one help me to overcome this error
Waiting for your replies
G.Muthamil Murugan.

Hi addy,
Thanks for your reply. I have maintained the following Info structure which I created,
Under characteristic I have maintained the following,
1.Sales Organisation.
2.Sales group
3. Sales office
4. Distribution channel
5.Division
6.Material
Under Key figure I have maintain the following,
1. Order items
2. Production
3.Sales
4. Stock level
5. Target stock level
6. Day's Supply
7. available capacity
8.Target days supply
I don t know where i did mistake. can you correct me.
Regards,
Muthamil Murugan.G

Error while creating Business partner

Hello,
I am getting an error while creating a role in Business Partner (T.code BP). The error is given below:
Role 'contract partner' in IS-U not same as role from FS
Message no. E9450
Diagnosis
In IS-U or IS-T, you are not permitted to allocate the role Contract Partner and a role from Financial Services (role category begins with 'FL' or 'TR') to a business partner. This is due a conflict with regard to the corresponding customers
Procedure
Create another business partner as a duplicate.
Please assist.
Thanks & Regards,
Vineet

Hi,
The error prompts you that you can not create a business partner in financial roles (TR*, FL*) where a role of contract partner is already assigned to same partner.
Please refer SAP Note - 1123452 and 1564107.
Regards
Prasad AV

SLG1 error while creating Business Partner

Hi,
Im currently working on SRM 7.0 and keep receiving the following errors in SLG1. Can you kindly advise what might be the root cause for the below errors so ican fix the issue and ensure the same error doesnt pop up going further?
Error type 1:
Error: Error while Creating Business Partner (BP) Module: BUPA_CREATE_FROM_DATA Vendor: XXXXX
The region 00 is not defined for country DE
Error type 2:
Error: Error while Creating Business Partner (BP) Module: BUPA_CREATE_FROM_DATA Vendor: XXXXXX
The transport zone ZOC0000001 is not defined for country YY
Error type 3:
Error:Error while Creating Business Partner (BP) Module: BUPA_CREATE_FROM_DATA Vendor: XXXXXX
Email address "whatever email" is invalid
Appreciate your feedback
Akshay

Hello Akshay,
Resolution for Isuue 1:
SAP Web Application Server -> General Settings -> Set Countries -> Insert Regions or Define Country Codes
Region for country DE is not maintained in SPRO or bad data.
Resolution for Issue 2:
SAP Web Application Server - Application Server - Basis Services - Address Management - Maintain Transport Zones
Maintain the transport zones in SRM.
Resolution for Issue 3:
email address should be a valid address. SRM checks the format e.g. xx @ yy . zzz
I believe error could be due to incorrect data.
Hope this solves.
Ashutosh

Source sys Restore "error while creating table EDISEGMENT "

Dear All,
I am Basis person and recently we have refreshed data of Test BI system from Development BI system. we normally carry out these Refresh but In this case we have also changed Hostname and SID for Test BI system.
We have done all BW refresh steps as per guide and during Restore of source system we
are getting errors during datasource activation as " error while creating table EDISEGMENT ".
we have checked RFC and Partner profiles and working fine.
We have 2 clients connected from source system to our Test BI box.strange thing is we got one source system activated without any errors and for second
source system we are getting above mentioned error.
We have reviewed notes 339957 , 493422 but our BI fuctional team is not sure whether
those apply to our OLTP system , as one source system from same OLTP system got
successfully activated and source system for other client giving this issue .
Please help us out with this problem.
we are running on BI 7.0 platform and ECC 6.0 for source.
Regards,
Rr

check the relevant profiles in We20 t code and also in sm59 if the remote connection with autorisation is sucssessfull, connection is ok otherwise you need to check th paramters.
hope this helps
regards
santosh

"error no:58" partner profile not maintained in idoc.

Hi to all,
i am new member to this site already searched forums for solution.
can anyone help us out to solve the following error while simulating inbound idoc.Error:58 " partner profile not maintained"
we tried with msg type CREMAS and DEBMAS.created partner profiles,rfc connection as procedural but same error results.
also give some useful links to process idocs.
we want ur valuable suggestions,thanks in advance.
regards
vinoth

Hi,
link for inbound idocs is given below
[http://help.sap.com/saphelp_46c/helpdata/en/78/2174b051ce11d189570000e829fbbd/content.htm|http://help.sap.com/saphelp_46c/helpdata/en/78/2174b051ce11d189570000e829fbbd/content.htm]
[http://sapdocs.info/sap/abap/idoc-useful-notes/http://www.scribd.com/doc/24447/SAP-R3-IDoc-Cookbook-for-EDI-and-Interfaces-by-Axel-Angeli|http://sapdocs.info/sap/abap/idoc-useful-notes/http://www.scribd.com/doc/24447/SAP-R3-IDoc-Cookbook-for-EDI-and-Interfaces-by-Axel-Angeli]
[http://www.riyaz.net/blog/beginners-guide-to-ale-and-idocs-part-ii/|http://www.riyaz.net/blog/beginners-guide-to-ale-and-idocs-part-ii/]
[http://www.riyaz.net/blog/beginners-guide-to-ale-and-idocs-part-iii/|http://www.riyaz.net/blog/beginners-guide-to-ale-and-idocs-part-iii/]
Please check in the receiver side if the partner profile is configured correctly.
Go through the link below in order to maintain partner profile.
[http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b80b543d711d1893e0000e8323c4f/content.htm|http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b80b543d711d1893e0000e8323c4f/content.htm]

Getting error while creating the variable of Schema Element type

Hi everybody,
For creating a variable of schema element type I am doing the following steps...
Select 'Variables' after right clicking on bpel process. IN this window, go to 'Create VAriable' then select 'Element' type. Now in Type Choose, I expanded the my imported schema files. And selected a element type, then click ok to create this variable... I am getting the message...
IN ORDER TO SAVE IMPORTED WSDL/SCHEMA FILES, YOU MUST HAVE A PARTNER LINK LOCATED UNDER THE CURRENT PROJECT DIRECTORY.
What is mean by that.
I have imported the schema files in project. AFter that I have imported them into the WSDL also. Now why I am getting error while creating the variable. However I can create variable directly in .BPEL file then everything is fine. And it is working also. But what is mean with the above error? Why I am not able to create variable through GUI?
Thanks.

Hi,
I have this same problem this morning, and I was going crazy, until I found this webpage on the internet:
[http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process|http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process]
The idea is that the jdeveloper is not very good working with directories with spaces on the directory name. If you move all your work to a directory without spaces, it will work smoothly. At least, it had worked for me.
Regards,
Nacho

Error while creating a Solaris Resource

I got the following error while creating the following solaris resource:
Test connection failed for resource(s):
Solaris: Script failed waiting for "ASSWORD:" in response "_,)#+(:" ==> com.waveset.util.WavesetException: Script processor timed out with nothing to read and the following unprocessed text: "_,)#+(:".\n
I have the sudo permissions for the following commands:
(ALL) NOPASSWD: /usr/bin/auths, /usr/sbin/groupadd, /usr/sbin/groupdel, /usr/sbin/groupmod, /usr/bin/last, /usr/bin/listusers, /usr/bin/logins, /usr/bin/passwd, /usr/bin/profiles, /usr/bin/roles, /usr/sbin/useradd, /usr/sbin/userdel, /usr/sbin/usermod, /usr/bin/ypmatch, /usr/bin/ypcat, /usr/bin/ypasswd, /usr/bin/awk, /usr/bin/cat, /usr/bin/chmod, /usr/bin/chown, /usr/bin/cp, /usr/bin/cut, /usr/bin/diff, /usr/bin/echo, /usr/bin/grep, /usr/bin/ls, /usr/bin/mv, /usr/bin/rm, /usr/bin/sleep, /usr/bin/sort, /usr/bin/tail, /usr/bin/touch, /usr/bin/which
Please let me know what could be the problem?

This doesn't look like a Sun Directory Server issue. You may want to post this to another forum.
Regards,
Ludovic.

Error while creating money market transaction - payment details not retrieving from BP master data.

Hello friends
I have error while creating financial transaction. Payment details are not retrieving from BP master data to creating financial transaction screen.
No payment details entered for transaction
Message no. FTR0030
Please advise to set off this.
Thanks & Regards
Swami

Dear Swami,
Please select one payment details in Business partner and use assigned tab from top selection parameter from standing instruction to assigned bank details to product type.
It will open other window like above example for each product of treasury, then assign bank details to product. Once assigned and save.
System will pick payment details in deal automatically based on business partner.
Hope this solve your issue.
Regards,
Jain
Message was edited by: Jain Varghese

Error while creating new user in Oracle 11i EBS

I am getting following error while creating new user. How solve this issue?
“Unable to load java class % specified profile option SIGNON_PASSWORD_CUSTOM. Please verify that the class exists and that it implements the java interface oracle.apps.fnd.security.PasswordValidation”.

Following is the text from Note for Custom Password Validation logic:
Customers who wish to use their own password validation logic may do
so by writing their own Java classes that implement the
oracle.apps.fnd.security.PasswordValidation Java interface. The
interface requires 3 methods to be implemented:
1) public boolean validate(String user, String password)
    - This method takes a username and password, and then returns true
or false, indicating whether the user's password is valid or invalid,
respectively.
2) public String getErrorStackMessageName()
    - This method returns the name of the message to display when the
user's password is deemed invalid (i.e., the validate() method returns
false).
3) public String getErrorStackApplicationName()
    - This method returns the application shortname for the
aforementioned error message.
After writing the Java class to perform customized password
validation, the customer must then set the value of the profile option
SIGNON_PASSWORD_CUSTOM to be the full name of the class. If, for
example, the name of the Java class is
oracle.apps.fnd.security.AppsPasswordValidation, then the value of the
SIGNON_PASSWORD_CUSTOM profile option must be
oracle.apps.fnd.security.AppsPasswordValidation. Note that AOL/J
will attempt to load this class dynamically. Hence it is necessary to
make the class accessible by AOL/J. This means that in Forms, the
class must first be loaded into the database using the loadjava
command.
You will need to apply the following patches for 11.5.1:
   1344802
   1363919
   1472974
   1351004
   1377615
You will need to apply the following patches for 11.5.2:
   1377615

Error while creating Partner Profile

Similar Messages

Maybe you are looking for