Error while creating physical inventory document with zero count

Hi,
I am trying to create a physical inventory document for a material that has zero stock and that is not batch managed but I am geting an error as below.
"Item 001: No batches that can be included in phys. inv. exist.(Message no. M7701)"
This error occurs only for one or two materials.
I am able to create the physical inventory document for other materials which is also zero stock and there is no batch managed for the same.
Can anyone pls advice.
Regards,
Ramya

hi
if your material is split valuated, but not batch managed, then the split valuation type is shown in field batch number. And...it is a batch then.
To be able to do a zero count you have to have a batch record whose batch number is the valuation type.
If you never had stock in the storage location you want count, then you have to
1. extend the material to this storage location with MMSC
2. create the batch record with MSC1N for this storage location.

Similar Messages

  • Need help in creating a Physical Inventory Document with HUs given

    Hi Gurus,
    There is a problem I am facing while doing a ALV report.
    I have created the report and there is a button which i have fixed which has to create Physical Inventory Document.
    The scenario is:
    I will select the records in the report based on the Vessel Bill Of Lading (VBOL) (related to Batch characteristics of a material) and then i need to pass those values to create Physical Inventory Document.
    I got a functional module HUINV_DOCUMENT_CREATE which will create the document but I am not clear what are the values that I need to pass in this.
    Or do anyone know how to create the Document by passing HU (Handling Units) and Plant & Storage Location?
    Please help me in the same.
    Thanks and Regards
    Vipin Das V

    Hi ,
            Just Pass the table of Handling Unit .That's all.
    <REMOVED BY MODERATOR>
    Edited by: Alvaro Tejada Galindo on Mar 28, 2008 5:12 PM

  • Error while Posting Physical Inv Document

    Dear All,
    While posting physical Inventory Document contains only 776 items only
    i got this error
    Maximum number of items in FI reached
    Message no. F5727
    Regards,
    Pardeep Malik

    What did you do with the PID? did you modify to allow more than 333 items ?
    as each item in a PID can create 3 entries in FI, the PID is limited to 333 items, because FI document can only take 999 items

  • Error while creating the sales order with billing reference

    hi alll
    i am getting error while creating the sales order with billing reference.The line items are coming in grey.I am not able to change the items as well as the quantity field.Can u guide me
    cheers
    shalsa007........

    Dear SAP SD 007
    I can confidently tell that an enhancement or an user exit has been applied in your scenario
    You have to check that
    Normally when creating a sales order with respect or referring billing documents the qty will be in editable mode and it is standard problem
    Your people has solved the standard problem by enhancement
    Usually OR--LF-PGI----F2 (SAY THE QTY IS 25 UNITS)
    Now you are creating returns order with reference to F2 in the return order type Re there is a standard issue that user can edit the qty to 30 from the original 25
    To solve this only your people have used userexit
    Line items and qty greyed out means definately there is some enhancement or user exit applied
    You have to check that
    Regards
    Raja

  • Issue while posting physical inventory document

    Hi Team,
    While posting a physical inventory document system is giving error message saying that
    HU exists at another point in the warehouse. Clear the HU first
    Message no. /SCWM/GM751
    here is my scenario: As per the system bin is empty, while doing physical inventory we found and counted one HU in the same bin. while posting the same physical inventory document we are getting the above error message. as per the system this HU available in some other bin.
    could you please let us know is there any process which i am missing before posting the PI document.
    while posting the PI document is it not possible automatically HU get move from one bin to other bin?
    Thanks
    Mastan

    Hi  kmastanrao
    All above suggestion given need to check.
    1. Check HU available in WH. In EWM monitor and HU details.
    And after finding the status of HU and use as you need in your process.
    second if needed I can provide HU table in EWM which can be used.
    Regards
    Suraj

  • Can we create Physical inventory document for SO stock (E stock)?

    Hi,
    Can we create Physical inventory document, enter count, then post different for SO stock (E stock)?
    I try these, after post the different, system does not make any adjustment on my stock quantity.
    How can we do these? I wish to zerorize my SO stock quantity. It was a mistake created earlier.
    Thanks

    Hi,
    Thanks for your helps.
    I try, after I run batch input, where can I know the Physical Inventory Document created via SM35?
    And I try MI01 with indicate E special stock indicator, it allow to put SO number and SO line item.
    Can I know what is different by using MI01 and MIE1? When we will using MIE1?
    Thank you.

  • Error while creating the HTTP client with destination GB_DPSRetrieve

    Hi All,
    It is an interface R/3 -->XI --> HTTP ( proxy to HTTP ).
    Please find the error log below and throw some light why the HTTP adapter is getting error -
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SAP="http://sap.com/xi/XI/Message/30">
    - <SOAP:Header>
    - <SAP:Main xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" versionMajor="003" versionMinor="000" SOAP:mustUnderstand="1" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7">
      <SAP:MessageClass>SystemError</SAP:MessageClass>
      <SAP:ProcessingMode>synchronous</SAP:ProcessingMode>
      <SAP:MessageId>DC98499F-7E42-74F1-A41F-0017A4107EE6</SAP:MessageId>
      <SAP:RefToMessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:RefToMessageId>
      <SAP:TimeSent>2007-11-21T15:51:30Z</SAP:TimeSent>
    - <SAP:Sender>
      <SAP:Party agency="http://sap.com/xi/XI" scheme="XIParty">GovernmentGateway</SAP:Party>
      <SAP:Service>GGMailbox</SAP:Service>
      <SAP:Interface namespace="http://sap.com/xi/E-FILING_GB/2005">DPSretrieve</SAP:Interface>
      </SAP:Sender>
    - <SAP:Receiver>
      <SAP:Party agency="" scheme="" />
      <SAP:Service>SAP_DEV_ERP2005</SAP:Service>
      <SAP:Interface namespace="http://sap.com/xi/HR">HR_GB_EFI_DPSretrieve</SAP:Interface>
      </SAP:Receiver>
      <SAP:Interface namespace="http://sap.com/xi/E-FILING_GB/2005">DPSretrieve</SAP:Interface>
      </SAP:Main>
    - <SAP:ReliableMessaging xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:QualityOfService>BestEffort</SAP:QualityOfService>
      </SAP:ReliableMessaging>
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIAdapter</SAP:Category>
      <SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_CLIENT_DEST</SAP:Code>
      <SAP:P1>GB_DPSRetrieve</SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error while creating the HTTP client with destination GB_DPSRetrieve</SAP:Stack>
      <SAP:Retry>N</SAP:Retry>
      </SAP:Error>
    - <SAP:HopList xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
    - <SAP:Hop timeStamp="2007-11-21T15:51:30Z" wasRead="false">
      <SAP:Engine type="BS">SAP_DEV_ERP2005</SAP:Engine>
      <SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
      <SAP:MessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:MessageId>
      <SAP:Info>3.0</SAP:Info>
      </SAP:Hop>
    - <SAP:Hop timeStamp="2007-11-21T15:51:30Z" wasRead="false">
      <SAP:Engine type="IS">is.00.lbsth-tb1ci</SAP:Engine>
      <SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
      <SAP:MessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:MessageId>
      <SAP:Info>3.0</SAP:Info>
      </SAP:Hop>
    - <SAP:Hop timeStamp="2007-11-21T15:51:30Z" wasRead="false">
      <SAP:Engine type="IS" />
      <SAP:Adapter namespace="http://sap.com/xi/XI/System">HTTP</SAP:Adapter>
      <SAP:MessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:MessageId>
      <SAP:Info />
      </SAP:Hop>
      </SAP:HopList>
    - <SAP:RunTime xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
      <SAP:Date>20071121</SAP:Date>
      <SAP:Time>155130</SAP:Time>
      <SAP:Host>lbsth-tb1ci</SAP:Host>
      <SAP:SystemId>XIS</SAP:SystemId>
      <SAP:SystemNr>00</SAP:SystemNr>
      <SAP:OS>Windows NT</SAP:OS>
      <SAP:DB>ORACLE</SAP:DB>
      <SAP:Language />
      <SAP:ProcStatus>023</SAP:ProcStatus>
      <SAP:AdapterStatus>000</SAP:AdapterStatus>
      <SAP:User>PISUPER</SAP:User>
      <SAP:TraceLevel>1</SAP:TraceLevel>
      <SAP:LogSeqNbr>000</SAP:LogSeqNbr>
      <SAP:RetryLogSeqNbr>000</SAP:RetryLogSeqNbr>
      <SAP:PipelineIdInternal>SAP_CENTRAL</SAP:PipelineIdInternal>
      <SAP:PipelineIdExternal>CENTRAL</SAP:PipelineIdExternal>
      <SAP:PipelineElementId>60C3C53B4BB7B62DE10000000A1148F5</SAP:PipelineElementId>
      <SAP:PipelineService>PLSRV_CALL_ADAPTER</SAP:PipelineService>
      <SAP:QIdInternal />
      <SAP:CommitActor>X</SAP:CommitActor>
      <SAP:SplitNumber>0</SAP:SplitNumber>
      <SAP:NumberOfRetries>0</SAP:NumberOfRetries>
      <SAP:NumberOfManualRetries>0</SAP:NumberOfManualRetries>
      <SAP:TypeOfEngine client="200">CENTRAL</SAP:TypeOfEngine>
      <SAP:PlsrvExceptionCode />
      <SAP:EOReferenceRuntime type="TID" />
      <SAP:EOReferenceInbound type="TID" />
      <SAP:EOReferenceOutbound type="TID" />
      <SAP:MessageSizePayload>0</SAP:MessageSizePayload>
      <SAP:MessageSizeTotal>2918</SAP:MessageSizeTotal>
      <SAP:PayloadSizeRequest>0</SAP:PayloadSizeRequest>
      <SAP:PayloadSizeRequestMap>0</SAP:PayloadSizeRequestMap>
      <SAP:PayloadSizeResponse>0</SAP:PayloadSizeResponse>
      <SAP:PayloadSizeResponseMap>0</SAP:PayloadSizeResponseMap>
      <SAP:Reorganization>INI</SAP:Reorganization>
      <SAP:AdapterInbound>PLAINHTTP</SAP:AdapterInbound>
      <SAP:AdapterOutbound>IENGINE</SAP:AdapterOutbound>
      <SAP:InterfaceAction>INIT</SAP:InterfaceAction>
      <SAP:RandomNumber>15</SAP:RandomNumber>
      <SAP:AckStatus>000</SAP:AckStatus>
      <SAP:SkipReceiverDetermination />
      <SAP:Receiver_Agreement_GUID>24422A5646443F8E9D975D57A3EE8162</SAP:Receiver_Agreement_GUID>
      </SAP:RunTime>
    - <SAP:PerformanceHeader xmlns:SAP="http://sap.com/xi/XI/Message/30">
    - <SAP:RunTimeItem>
      <SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
      <SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.5</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
      <SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
      <SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
      <SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
      <SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
      <SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
      <SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
      <SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
      <SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
      <SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_MAPPING_REQUEST</SAP:Name>
      <SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_MAPPING_REQUEST</SAP:Name>
      <SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_OUTBOUND_BINDING</SAP:Name>
      <SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_OUTBOUND_BINDING</SAP:Name>
      <SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_CALL_ADAPTER</SAP:Name>
      <SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
      <SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.656</SAP:Timestamp>
      </SAP:RunTimeItem>
      </SAP:PerformanceHeader>
    - <SAP:Diagnostic xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:TraceLevel>Information</SAP:TraceLevel>
      <SAP:Logging>Off</SAP:Logging>
      </SAP:Diagnostic>
    - <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
      <Trace level="1" type="T">SystemError message generated. Guid: DC98499F7E4274F1A41F0017A4107EE6</Trace>
      <Trace level="1" type="T">Error during execution of message : DC98499CA1EABEF1B4DD00110A63BF06</Trace>
      <Trace level="1" type="T">ApplicationMessage was (=RefToMsgId): DC98499CA1EABEF1B4DD00110A63BF06</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
    - <!--  ************************************
      -->
      </SAP:Trace>
      </SOAP:Header>
    - <SOAP:Body>
      <SAP:Manifest xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-manifest-5CABE13F5C59AB7FE10000000A1551F7" />
      </SOAP:Body>
      </SOAP:Envelope>
    Regards,
    Kishore

    Hi,
    In the HTTP Receiver what is the Addressing Type used ? (URL Address or HTTP Destination).
    If its URL Addressing Type, check if right Authentication Type is used with valid values and for HTTP Addressing Type check this HTTP Client Create Error, it could be helpful.
    Also check if the Target system can be reached from the XI server to validate the configuration parameters.
    Regards,
    S.Santhosh Kumar

  • Error while creating the HTTP client with destination

    Hi ,
    I am getting this error while connecting to https location on receiver channel . The below error i am getting in SXMB_moni
    Error while creating the HTTP client with destination
    The receiver party is doing some security setting on there end and for that purpose we have provided the external IP address to them , after that we are getting the above error.
    We have already installed the client certificate on our staging server , and have done the correct setting in SM59 and channel.

    Check few things..
    1) I believe you use specify destination for the addressing type field in the comm channel. If so make sure you entered valid target URL address in the SM59 of type http destination.
    2) Check the validitity of the certificate. You can import the certificate both in java and abap stack.
    3) Make sure certificate is installed as expected.
    4) Send the request and talk to the target system and check what error information they get in their log related to ssl.

  • What is T-code to cancel physical inventory document for cycle count MICN?

    HI
    Please advice me what is T-code and step to cancel physical inventory document for cycle count MICN?
    Thanks

    There is no way to Cancel the Cycle count document. however you can click on 0 count so that it wont post any new entry on the cycle count.

  • MI31: Cannot Create Physical Inventory Document for a Certain Material

    Dear SAP MM Friends,
    Greetings! I am a budding MM functional analyst in our company. I received a call earlier regarding with transaction code MI31 (Selected Data for Physical Inventory Documents w/o Special Stock). The user cannot generate a physical inventory document for a certain material.
    The thing is, we no longer have any stock for this material (MMBE). I tried generating physical document again by ticking "Only Materials with Zero Stock" but to no avail.
    May I ask what might be the reasons behind? Your prompt response is highly appreciated.
    Thank you very much.
    Best Regards,
    Albert

    Hi,
    Please check also the existing physical inventory document for material, probably you still have active physical document from previous period.
    1. Go to MI22 --> select your plant, storage location or you can also specify your material number --> execute.
    2. Check your Physical Document list, at field Status doc. --> if the status is Doc. active, but it is not in your current period, then it could be the problem.
    3. Delete the physical inventory doc that you found in step 2 (use tcode MI02 --> physical doc, year --> choose delete button)
    4. Try to create new physical document for the material.
    hope this help.
    rob

  • Error in creating physical inventory creation

    Hi
    One of my customer is getting an error as " given batch is not accepting
    physical inventory 701 " . The batch is a existing and the problem is this works for most of the batches and only for some are not working. Pls note they are using mi01 , mi04 , mi07 to create physical inventory .
    Pls guide me to find the reason for having this error .
    Thanks & Regards
    Iresha

    Yes you found the reason. If there is no record in MCHB, then this batch has never been in that storage location, hence the batch record does not have a storage location segment.
    The physical inventory difference posting cannot create such segments. thats why you get this error.
    You have to create this segment manually in MSC1N or by moving this batch with 311 movement from the other storage location to this storage location (and back, to not mess up your current book inventory)
    After the segment is created, you can post the difference
    Edited by: Jürgen L. on Nov 27, 2008 5:23 PM

  • Creating Physical Inventory Documents using batch job in WM

    We use transaction LX26 to create the physical inventory documents for the storage bins and the materials therein. and the new PI dates are proposed based on the cycle count indicators configured.
    We want to automate the creation of physical inventory documents using a batch job. How can we achieve this?
    I understand that the program RM07ICN1 generates PI documents only when materials are managed at IM levels and this does not work for WM. Is there any other standard program which can be set up in batch to create the PI documents for the materials at WM level? If there is something then please let me know details....
    Thanks,

    I entered following details,
    WH no.
    Storage Type
    Inventory in Period (One year date range)
    Inventory Count date (Today's date)
    The output in spool shows me the following,
    No of Records Passed ;Quant Information; InventoryProposal; Later / block; Bin Information; Empty bins; Inventory active
    The list of storage bin, material, description & inventory date is also displayed.
    Description has Scheudled and Overdue and the inventory date is some dates in next months.
    It doesnt show anywhere that inventory document is generated.Please note that I had not selected the Activate Inventory List check box because I just want the system to auto create the inventory documents based on the logic of cycle count indicators.

  • Error while creating a credit memo with reference to invoice

    HI aLL,
    I am facing one issue while creating a credit memo request in VA01 with reference to invoice.
    Our project stock is valuated stock.
    When we try top copy the error pops up" Valuated project stock not allowed with customer stock." and the line item is not copied in the credit memo.
    Diagnosis:The entered wbs manages a valuated project stock,at the same time sales order stock is maintained on sales order line item.this combo is not allowed as different valuation methods within a project is not allowed.
    Tarun Kapur

    Dear Tarun!
    1.Within a project we can get stock only in PROJECT or in SALES ORDER STOCK.....a single material can not be a both place at particular time ..so keep only one
    Project Stock or Sales Order Stock..
    2.Check DIP PRofile (ODP1) in usage BILLING AND RESULT ANALYSIS -Charectiristic -SDOC TYPE CMR.....are you selecting right document to which you want to copy .....
    Rewards Points if usefull
    Regards
    SMITH

  • Error while creating ARE-1 document.. VERY URGENT... Pls help

    Hi,
    i had created excise invoice with BED as zero but when creating ARE-1 document i am getting an error as -
    Export under bond! Specify a bond number and year
    i tried to give the internal bond number and year in Bond/UT-1 Detail but there were no values for it , hence i also maintained the number ranges for object J_1IBOND, J_1ARE1.But still the error was not solved. Please help!!! Urgent
    Thanks & Regards,
    Ramya
    Edited by: ramya s on Apr 15, 2008 8:44 AM

    Hi,
    i had created excise invoice with BED as zero but when creating ARE-1 document i am getting an error as -
    Export under bond! Specify a bond number and year
    i tried to give the internal bond number and year in Bond/UT-1 Detail but there were no values for it , hence i also maintained the number ranges for object J_1IBOND, J_1ARE1.But still the error was not solved. Please help!!! Urgent
    Thanks & Regards,
    Ramya
    Edited by: ramya s on Apr 15, 2008 8:44 AM

  • Error while creating an held document

    Dear experts,
    While i wish to create Hold Document, i am getting following error:
    Held documents must be converted; read long text
    Message no. F5410
    Any body can fix this please
    Dasu

    Hi, Venkat
    See the full details of the error...
    Held documents must be converted; read long text
    Message no. F5410
    Diagnosis
    The structure of the document data has changed in the meantime. Before new documents can be held or held documents can be processed, the documents held up to now must be converted.
    Procedure
    The conversion of the held documents is carried out by report RFTMPBLU. For larger data volumes (more than a couple of hundred held documents), the report should be planned as a batch job.
    The conversion of held documents is generally supported for documents which were entered in release 1.3A or later.
    A conversion of older held documents is not possible. You must delete these documents with the report RFTMPBLD. Afterwards, you must start the report RFTMPBLU to activate the version management for held documents.
    If only small datasets are to be converted or deleted, you can carry out the action in another window and after completing the action, continue the current processing.

Maybe you are looking for

  • Parking Vendor payment / customer payment

    Hi Gurus, Is it possible to park vendor / customer payments ? As FV60 & FV70 are available for parking vendor and customer invoices is there a similar functionality available to park payments. We have already configured workflow. But the problem is,

  • Fault handling in DIServer Interact

    Good Day Mentors, I'm currently testing out how the DIServer works. Now, I am testing Fault handling with the DI Server, and would want to know if there is a way to get multiple Errors from an DI Server Interact call. My test scenario was adding 2 Sa

  • Full Screen Mode Not Working In iTunes

    With the latest iTunes update, when I play anything in "Full Screen" mode, I get the black background with this tiny (smaller than a postcard) picture. Anyone else having the same problems? Any suggestions? This problem never happened before. Seems t

  • HT1518 I have a Universal Keyboard how to I insert the copywrite symbol into my photographs

    Have tried but to no avail, how can I insert the Copywrite symbol into my photographs to protect them before posting online please.

  • Photoshop "convert to profile" box---how to ignore?

    Hello, I have an batch & action that "converts to profile" as well as other image resizings--and then saves. On 2 workstations--the batch,action works fine. On the 3rd workstation, I get the "convert to profile" window asking to "confirm"? Where do I