Error while creating Rough cut planning profile

Facing the following error while creating rough cut planning profile (mc35) in SOP for product group. "Work center x plant y does not exist for task list type 3". pls advise- do i need to create tsk list for product group? pls advise with tcode to be used.

pls check the (task list ) usage you have maintained in the Work center.
In OP45 , pls ensure that for the usage ,
task list type 3 (Rough cut planning profile) is included.
If it is not included there , pls include the TL type 3 for your usage and now the prob will get solved.
Regards.,
Sheik

Similar Messages

  • Error while creating rough cut plannin profile using Info structure

    Hi,
    I got the following error while creating rough cut planning profile for Info structure,
    Capacity planning is not possible for this info structure S504
    Message no. MA489
    Diagnosis
    In the planning parameters for info structure S504, no key figure for capacity planning has been entered.
    Procedure
    If you want to capacity planning to be possible for this info structure, you need to enter a capacity key figure in the planning parameters for the info structure in the Implementation Guide.
    The info structure which i used here is created by me. Can any one help me to overcome this error
    Waiting for your replies
    G.Muthamil Murugan.

    Hi addy,
    Thanks for your reply. I have maintained the following Info structure which I created,
    Under characteristic I have maintained the following,
    1.Sales Organisation.
    2.Sales group
    3. Sales office
    4. Distribution channel
    5.Division
    6.Material
    Under Key figure I have maintain the following,
    1. Order items
    2. Production
    3.Sales
    4. Stock level
    5. Target stock level
    6. Day's Supply
    7. available capacity
    8.Target days supply
    I don t know where i did mistake. can you correct me.
    Regards,
    Muthamil Murugan.G

  • Rough Cut Planning Profile-by Capacity category

    Hai,
    I am creating Rough Cut Planning Profiles in ECC6.0 for use in Standad SOP (S076). In MC35, I don't see a place where I can enter by Work center category- like I want both Machine and Labour categories as I have different times for each category.
    { when I view the rough-cut capacity situation in MC82, system displays both categroies, but it is based on only the hours I maintained for one of the categories- how do I maintain for both categories?}
    Thank you in advance:)
    Sonali
    Edited by: Sonali on Apr 28, 2009 3:05 PM

    Hello Sonali,
    Rough cut capacity planning is used only  for bottle neck resources.Analyze your process and you will come to know for the product group or material which category or machine is bottleneck.
    Create a rought cut planning profile for a production line or Workcenter or PRT or Cost(Relative cost not product cost).
    PS:Roughtcut capcity planning should not be used for all the workcenters.
    Thanks,
    Raj

  • How can we define time stamp in rough cut planning profile

    Hi all
    There is no time stamp(From date to date) in Rough cut planning profile and it is just time span (0-5 ,5-10,... workdays) . If I have different capacity for my resource in different intervals how should I define it so that in planning table it can take it to account and show me requirement versus avalilable capacity acoordingly.Note that we are working with repetitive plannig and our resources are lines which have different production rate between each interval.
    Regards
    Babak Bolourchi

    Dear,
    In REM you can use planning table through MF50 for your requirement.
    For time stamp in rough cut planning profile   please refer my reply from this link,
    [Rough cut planning|Rough cut planning profile]
    [Link 2|https://forums.sdn.sap.com/click.jspa?searchID=25236413&messageID=6404039]
    Hope it will help you.
    Regards,
    R.Brahmankar

  • Rough Cut Planning Profile MC35

    Hi all,
    I was trying to check capacity rough cut planning in product group level, so i have to make the RCPP (ROugh Cut Planning Profile) in that product group level using MC35,
    i still confuse with the time span, base qty and the value in resource table at MC35, what is the connection between these 3 value??
    regards,
    MARUFAT

    Hi,
    i still confuse with the time span and the resource table in RCCP MC35
    i enter the time span with value 1, and the resource table column will give value 1,2,3,...
    and when i enter the time span with 5, the resource table column will give value 0-5, 6-10, ...
    if i enter the base qty is 5000 to, with time span value 1, and in resource table i enter for column 1 with value 40 and column 2 with value 50, what is the meaning of that? ( the Resource table use work center with UOM HR )
    regards,
    MARUFAT

  • Rough cut planning profile

    Hi Gurus,
    Our scenario is we have two plants.The sales orders and the PIRs will be created in the Plant 1 and these requirements will be transferred as Stock transport orders to plant 2(with special procurement key) .All the materials will be manufactured in plant2.BOMs and routings are maintained in Plant 2.
    In this case if i want to maintain the rought cut planning profile , how can i map the scenario.
    Please help me in this.
    Thanks in advance,
    Ravi

    Hi Krishna,
    There are two plants.
    Plant 1
    Plant 2
    We will be creating PIRs in Plant 1.There is a special procurement key maintained for material which will say stock transfer from plant 2.
    The below are the steps:
    1. Create PIRs in the plant1.
    2. Run MRP
    3. STO req. will be created in Plant 1 against the PIRs.
    4. As the special procurement key is maintained in material master Planned orders will be generated in plant 2 against these  STOs from plant1.And production will be done in plant 2.
    So, now if i want to do rough cut plannig profile how can i proceed.
    Thanks,
    Ravi

  • Error while creating a Development plan template

    Hi Gurus,
    I am facing errors  while creating Development Plan Template.
    This is how it goes :
    When i click on Define Forms for Talent Assessment --> a wizard pops up & i select Development Plan :
    In first step, I am giving Title,Integration with SAP Learning Solution (check) & a rating scale.
    Now after clicking next, I am adding 2 development areas :
    1) Training
    2) Mentoring,
    now as soon as I'm clicking on End Configuration, It displays 2 errors & 1 warning message :
    error1 : Element Appraisal Template 'XXXXX' contains errors.Cannot change status.
    error2 : Value type 000000XXX of value class Q does not exists
    Warning 1 : You have maintained a description that is not displayed.
    In PHAP_CATALOG, when I'm trying to manually release the Criterion Group (VB) or Appraisal template (VA), it does not allow me to do it.
    Kindly let me know how to proceed further.
    Regards
    bharti

    Hi,
    Even though it gives the error,the new RTF template is uploaded and it is reflected when I query the template again.
    But when I run the Concurent program and see the output,the output still shows me the old template.
    Regards
    Jujaar

  • Rough Cut Planning Profile in SOP

    Hi,
    Need an input on the Values keyed in to the Rough cut capacity profile? Is there any documentation on the same?
    I have maintained the Time span as 1 work day and the basse quantity as 1. In the resource table, i have keyed in the work center and the unit as H. Now when i maintain a value of 1 under the first day the capacity req is 1 in SOP but when i maintain a value of 1 in day 1 and day 2- the capacity requirement doubles
    Edited by: Karthikeyan Balasubramaniam on May 9, 2008 4:28 AM
    Edited by: Karthikeyan Balasubramaniam on May 9, 2008 4:29 AM

    Hi Karthikeyan,
    The follwoing information given by sap will be useful.
    help.sap.com/printdocu/core/Print46c/en/data/pdf/PPCRPSOP/PPCRP_SOP.pdf
    help.sap.com/saphelp_45b/helpdata/en/a5/63211443a211d189410000e829fbbd/frameset.htm
    Reward if useful.
    Thanks and Regards,
    /N

  • Error while creating the Inspection plan by T.C QP01

    Hello Friends,
    In QP01, When i am trying to create a inspection plan system throwing the error message "The inspection plan identifier exists already. Enter another."
    Message no. QP054
    But in QP02, When i checked  for that material, Plant, Group Number, Group counter, Usage, Status, i didn't find the entry over there.
    Actually my requirement is to create a inspection plan for a material and plant combination with speicfic Usage as 61(customer requirement and status 4) but when i am trying to create that system throwing the error message explained above.
    Thanks and Regards,
    Jitendra Chauhan.
    Edited by: jitendra chauhan on Jun 1, 2010 4:28 PM

    Hello Friends,
    Thanks for your valuable answers.
    I checked in table MAPL, for a particular material, Plant, Group Number and Group Counter, there is no entry.
    Where as in table PLKO, for a particular Group Number and Group Counter, entry is there. Actually this Inspection Plan Group Number and Group Counter is assigned to multiple materials through Material Assignment. If i delete the entry for this in table PLKO, than for all rest of the materials also entry will be deleted.
    Hence how to resolve this?
    Actually for other material number, same plant, same group number and same group counter, entry exist. So can i simply go in the inspection plan of other material,same plant,same group number,same group counter and than inside the material assignment to assign the required  material code, plant and the group counter number?
    Looking ahead for valuable inputs from the genius.
    Thanks and Regards,
    Jitendra
    Edited by: jitendra chauhan on Jun 2, 2010 8:09 AM

  • Management studio error while creating/editing maintenance plan

    Hi,
    I had MS SQL 2012 enterprise edition installed and everything was working fine. Later I removed MS SQL 2012 and re-installed. Now when I am trying to create maintenance plan I am getting below error. When I click Yes system allows me to go through the maintenance
    plan wizard and create new plan but when I want to edit it give me same error and it doesn't open screen to edit the plans. Can you please provide solution to below error?
    Microsoft SQL Server Management Studio
    The 'Microsoft.DataTransformationServices.VsIntegration.DtsPackage, Microsoft.DataTransformationServices.VsIntegration, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' package did not load correctly.
    The problem may have been caused by a configuration change or by the installation of another extension. You can get more information by running the application together with the /log parameter on the command line, and then examining the file 'C:\Users\pac\AppData\Roaming\Microsoft\AppEnv\10.0\ActivityLog.xml'.Continue
    to show this error message?
    Yes   No   
    I tried repair option from MS SQL 2012 setup but it didn't solve the problem. This is my production system and it has TFS 2013 and it's database. Please let me know how severe this problem is? Is it something to be worried about in future? How do I solve
    this error?
    Regards, Premal Acharya

    Hi Michelle,
    Thanks for your reply. I resolved this issues yesterday by installing SQL Server
    Management Tools Complete. I suspect that
    Microsoft.DataTransformationServices.VsIntegration.DtsPackage, Microsoft.DataTransformationServices.VsIntegration
    DLL files were having issues. When I searched my system I could only find Microsoft.DataTransformationServices.VsIntegration.DLL and
    Microsoft.DataTransformationServices.VsIntegration.DtsPackage.DLL file was missing. 
    When I re-ran the MS SQL setup to add new feature I selected Management Tools Complete and after installation this error was resolved. Though this has solved the issue for now I feel the error shouldn't have come with Management Tools -
    Basic installation as I had installed MS SQL Server before with Management Tools - Basic and it had worked without any issues. 
    For now this issue is resolved but it will be of good help if I can know the cause of this error and what could be the possible solution. 
    Thanks.
    Regards, Premal Acharya

  • Error While creating loan repayment plan

    Hi
    While I am reating loan repayment plan after making the necessary inputs in the loan(0045) IT it is showing the following errror. We are having only the interest free loans.
    <b>Effect.int.rate cannot be calculated because no flow records exist</b>
    because of this I can not put the loan end date for the loan type.
    Pls give solution
    Regards
    Mathews

    Hi,
    I think you need to check these two points.
    1. Are you giving the End date as 31.12.9999 or the date on which the loan will have been reapid completely. You need to give the end date as the one on which the loan gets repaid.
    2. Otherwise please go to spro-payroll-your country payroll-loans-Calculation-Adjust Value Date (here give end date as 31.12.9999.
    Please try the above two points and see if it works.
    Regards,
    Imran

  • Rough cut planning in SOP for resource levelling

    Hello,
    I am trying rough cut planning in SOP.
    I have created rough cut planning profile for a product group by using MC35.
    The task list exits for the product group.
    In task list , work centre is maintained and the same is given while creating the rough cut profile.
    This product group contains some part number.
    When I try Views--->capacity situation -> rough cut planning--->show.
    System gives error that -
    > No resource load found.
    <u><b>Diagnosis given by system is as follows,</b></u>
    This situation may be caused by one or more of the following:
    •     No PP task list (rough-cut planning profile, rate routing, or routing) corresponding to the Customizing selection criteria has been defined for this material/product group at this scheduling level.
    •     Resources planning has not been configured appropriately in Customizing.
    •     The information structure which you are planning has not been configured appropriately in Customizing.
    System Response
    No capacity load could be determined.
    Procedure
    1. Check that a PP task list exists for this material/product group.
    2. Check that a lot size range has been maintained in the PP task list.
    3. Have your systems administrator check and, if necessary, change the resources planning settings in Customizing for Sales & Operations Planning (the steps "Scheduling levels" and "Routing selection").
    4. Have your systems administrator check that capacity planning has been defined for this information structure in Customizing.
    Please let me know how to maintain the resource planning settings for scheduling level and routing selection.
    Waiting for your reply.
    Regards,
    Ravindra Deokule

    Hi Ravindra,
    You can use t.code mc84 to create a product group.
    Pl follow the following steps to do SOP with product group.
    1. Create a Product group in tcode MC84.
    Enter a percentage for material say X & Y to be produced. X 40% & Y 60%. Total qty will be split in the ratio as per the %.
    2. Create Production Plan in tcode MC81.
    Enter the sales plan qty.
    Then goto menu,edit & choose create Prodn Plan synchronus to sales.
    3. Create Rough cut Planning Profile in tcode MC35.
    4. Enter the Status ,Usage & lot size.
    5. Choose resources tab & then choose work center & enter work center name which you consider as a bottle neck & then enter the unit of measure as 'min'.
    6. Use MC82,
    Choose inactive version and select your version.
    then goto menu->views> capacity situation>show
    7.Check for over loads & adjust your qty acordingly.once the load becomes 100 % save.
    8. Change the inactive version to Active version in tcode MC78.
    ie in the version enter the inactive version & in the target version enter'A00'
    9.In mc82 choose active version, you can see that the plan is activated now.
    10.In the menu choose extras & transfer to demand mgmnt.
    11.You can see the requirement in the md62 transaction.
    12.Then run mrp.
    Also regarding the unit of measure in t.code mc35,
    If you select your resource as 'workcenter' & choose min or hour & then you enter 1(eg) in the first field against the work center. This means it takes 1 min or hour to produce 1pc(base quantity) in that particular workcenter(bottleneck workcenter)
    Reg: Capacity calculation in mc87,follow the eg as above.Enter 1 min as time & base qty as 1 in mc35. Then check in mc87, you will get the load in %. ie if your work center is permitted to work for 8 hours/day & you pass a production plan of 480, then your load will match for 100%.
    Regards,
    Senthilkumar

  • Rough -cut plan with capacity requirment calculation

    Hi all,
    We checking SOP with rough-cut plan
    We created Rough-cut profile in mc35 for our bottle neck work center with base quantity -1 and time span - 1
    then we selected new work center (there is no existing cap req). and assigned base unit measure:min.
    and we assigned 1min for each day and saved the profile.
    Now we went to mc88 and checked the material's active version production plan. (period split- DAY)
    in View -> capacity situation -> rough cut planning -> show.
    System calculates some capacity requirement for our production plan.
    Say for tomorrow's date i given 1000 qty - production plan.
    but system showing capacity req
    Work center:  TESTWC3                  Plant: 0001         Capacity:  001
    Info structur  Material          Plant   Order qty     Unit     From              To          Capacity reqmts      Unit
    S076            TESTFERT14    0001  1000.000       EA    29.01.2010  11.02.2010   9000.000              MIN
    with 9000min and cap load more than 652% ( Actuallly  it has to show 1000min as per rough cut plan profile)
    Our available capacity of work center per day - 1380 min
    We cant understand the capacity requirement calculation in MC88..
    Help us out...
    Thanks in advance

    Hi,
    Rough cut planning is genrally done for the group of material say product group, group of workcentre rather than individual material or workcentre.
    As standard, in resource table whatever the value you enter that corresponds to no. of days. Each column represents one day.
    Pl. refer this link for clear understanding of the same.
    http://help.sap.com/saphelp_47x200/helpdata/en/a5/63212e43a211d189410000e829fbbd/frameset.htm
    Madhava

  • Error while Updating Enterprise Link Plan in Design Studio

    Hi, All
    I am getting one Error while Creating Enterprise Link Plan in Design Studio of BAM and Failed to Create the Plan.
    i.e.(IMessageSourceReceiver>messageReceive:javax.NameNotFoundException: java:comp/resource/BAMTTT/TopicConnectionFactories/bam_ttq_tab not found)
    Setup:
    Integration between Oracle EBS 11.5.10 and Oracle BAM 10.1.3.
    I am trying to get the Raw Data and sending over to the Enterprise Link Plan.
    1. Created bam_ttq AQ and bam_ttq_tab.
    2. Configured all of the startup parameters required for Enterprise Message Source Type (Oracle (AS JMS and OJMS)) in the Administrator of BAM.
    3. Configured the Oracle (AS JMS and OJMS) with the following values in the Enterprise Message Sources in the Architect of BAM.
    Initial Context Factory : com.evermind.server.rmi.RMIInitialContextFactory.
    JNDI Service Provider URL : opmn:ormi://inaportal.inatech.com:6004:home.
    TopicConnectionFactory Name : java:comp/resource/BAMTTT/TopicConnectionFactories/bam_ttq_tab.
    Topic Name : java:comp/resource/BAMTTT/Topics/bam_ttq.
    JMS Message Type : Text Message.
    Durable Subscriber Name (Optional) : Bamclient.
    Message Selector (Optional) :
    Client ID (Optional) : ClientId.
    4. Also configured the data-sources.xml and applications.xml in OC4J (10.1.2) to reference the database schema where the BAM_TTQ queue is created.
    5. Modified the jndi.properties file with required properties.
    java.naming.security.principal = ias_admin
    java.naming.security.credentials = inaportal321
    java.naming.provider.url = opmn:ormi://inaportal.inatech.com:6004:home
    java.naming.factory.initial = com.evermind.server.rmi.RMIInitialContextFactory
    6. In the Design Studio I have a Plan with Oracle BAM Enterprise Message Receiver and Grid.
    And when I am updating the plan I am getting the following error.
    IMessageSourceReceiver->messageReceive: javax.naming.NameNotFoundException: java:comp/resource/BAMTTT/TopicConnectionFactories/bam_ttq_tab not found
         at com.evermind.server.rmi.RMIContext.lookup(RMIContext.java:164)
         at javax.naming.InitialContext.lookup(InitialContext.java:347)
         at iteration.enterpriselink.sources.JMSConsumer.start(JMSConsumer.java:85)
         at iteration.enterpriselink.sources.JMSMessageSourceReceiverImpl.jmsConsumerStart(JMSMessageSourceReceiverImpl.java:1001)
         at iteration.enterpriselink.sources.JMSMessageSourceReceiverImpl.messageReceive(JMSMessageSourceReceiverImpl.java:326)
    [Oracle BAM Enterprise Link error code:  0x75 -- 0x1, 0x75 -- 0x3A]
    Error during Message Receive operation.
    [Oracle BAM Enterprise Link error code:  0x75 -- 0x1, 0x75 -- 0x3B]
    Error while processing the data for the step 'Oracle BAM Enterprise Message Receiver'
    [Oracle BAM Enterprise Link error code:  DC -- 0x1, DC -- 0x83]
    Error while processing the data for the step 'Oracle BAM Enterprise Message Receiver'
    [Oracle BAM Enterprise Link error code:  DC -- 0x1, DC -- 0x83]
    Update of Plan "EBS_Example" failed.
    [Oracle BAM Enterprise Link error code:  PlanMgr -- 0x1, PlanMgr -- 0xD5]
    Can anybody pls help me out with this? Its Urgent for Me
    Thx
    Renuka.
    Message was edited by:
    Renuka

    hi renuka..were u able to resolve this issue with the naming exception....cheers...

  • Error while creating ASN in SNC

    dear all,
    We are tring to create an ASN against a PO in "Due list for purchasing documents" in SNC but getting the following errors, the material is invalid, ship from location is invalid and the customer location is invalid.
    PO created in ECC and received in SNC. The PO acknowledgement was also received back in ECC but not able to post ASN from SNC to ECC.
    Request to please let us know if we have missed out on some master data setting?
    Thanks in advance.
    mahesh.

    Hi Mahesh
    I am also getting the similar type of errors while creating ASN against planned receipts in SNC . I was trying to find for some help & saw this thread.
    Just wondering if you managed to rectify the error & able to post the ASN?  Will appreciate if you can share the resolution with me.
    We are also on SNC 7.02.
    Regards,
    Tapan

Maybe you are looking for