Error While Creating Sales Document - on a new rollout

Dear Friends,
        While going for new Plant Creation on a Rollout, i am getting the following error while creating Sales Order,
Kindly suggest the needy to me,
" _Template and one-time material processing is not activated
No determination routine is specified for the SD documents for the
permitted combinations
The combination of sales organization, document category, and
document type or delivery type for the SD document is not permitted_ "
Thanks & Regards
T.Arulvanan

Dear Freind,
Have you assigned the Sales Area to the Document types
T-code : OVAZ.
Also Check the Sales Applications V/c2
Can you double click on the error and See what is the datails of the error appearing?
Regards,
Amlan Sarkar

Similar Messages

Error while creating sales order for a new company code

Hello SD Gurus,
The client wanted us to create a new Company Code, Plant, and Sales Organization. We created them. I extended the customer and material in QAS. Now, I'm trying to create one sales order in QAS but the system is throwing one error: "Maintain Profit Center Value in Custom Table in YSD_PROFIT_CNTR".
I googled for this error but found nothing. Could you please give me the solution asap. I need to prepare test script.
Thanks in advance
Regards,
Anwar

Dear Mohammed,
The error message itself states where is the issue. You need to maintain the profit center in table
YSD_PROFIT_CNTR. This is not SAP Standard provided solution. I guess during the time of implementation team has suggested to maintain the profit center in custom table.
If the table is"maintenance view" then you can check through SM30 and maintain the relevant entry. If not check if there is any transaction code with attached to this table. This you can check by going through SE93 and by entering Z* or ZSD* or Y* or YSD* and press F4, If the transaction code is starting with Z or Y it will open all the list of transaction codes. By going through the description of the transaction code. you can pick the right transaction code in case if any exists for this table.
Hope this information is useful to you.
Regards
Murali

Error while creating delivary document

Hi
i got error while creating delivary document
"Delevivary documents could not be created"
Thanks&regards
kishore kumar

Hi Kishore,
Please check the sales order is this relevent for the delivery or not.
Check the copy control settings between your sales document type and delivery document type in VTLA transaction.
Check the incompletion log for the sales order.
I hope it will help you,
Regards,
Murali.

Heap space error while creating XML document from Resultset

I am getting Heap space error while creating XML document from Resultset.
It was working fine from small result set object but when the size of resultset was more than 25,000, heap space error
I am already using -Xms32m -Xmx1024m
Is there a way to directly write to xml file from resultset instead of creating the whole document first and then writing it to file? Code examples please?
here is my code:
stmt = conn.prepareStatement(sql);
result = stmt.executeQuery();
result.setFetchSize(999);
Document doc = JDBCUtil.toDocument(result, Application.BANK_ID, interfaceType, Application.VERSION);
JDBCUtil.write(doc, fileName);
public static Document toDocument(ResultSet rs, String bankId, String interfaceFileType, String version)
    throws ParserConfigurationException, SQLException {
        DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
        DocumentBuilder builder = factory.newDocumentBuilder();
        Document doc = builder.newDocument();
        Element results = doc.createElement("sims");
        results.setAttribute("bank", bankId);
        results.setAttribute("record_type", "HEADER");
        results.setAttribute("file_type", interfaceFileType);
        results.setAttribute("version", version);
        doc.appendChild(results);
        ResultSetMetaData rsmd = rs.getMetaData();
        int colCount = rsmd.getColumnCount();
        String columnName="";
        Object value;
        while (rs.next()) {
            Element row = doc.createElement("rec");
            results.appendChild(row);
            for (int i = 1; i <= colCount; i++) {
                columnName = rsmd.getColumnLabel(i);
                value = rs.getObject(i);
                Element node = doc.createElement(columnName);
                if(value != null)
                    node.appendChild(doc.createTextNode(value.toString()));
                else
                    node.appendChild(doc.createTextNode(""));
                row.appendChild(node);
        return doc;
public static void write(Document document, String filename) {
        //long start = System.currentTimeMillis();
        // lets write to a file
        OutputFormat format = new OutputFormat(document); // Serialize DOM
        format.setIndent(2);
        format.setLineSeparator(System.getProperty("line.separator"));
        format.setLineWidth(80);
        try {
            FileWriter writer = new FileWriter(filename);
            BufferedWriter buf = new BufferedWriter(writer);
            XMLSerializer FileSerial = new XMLSerializer(writer, format);
            FileSerial.asDOMSerializer(); // As a DOM Serializer
            FileSerial.serialize(document);
            writer.close();
        } catch (IOException ioe) {
            ioe.printStackTrace();
        //long end = System.currentTimeMillis();
        //System.err.println("W3C File write time :" + (end - start) + " " + filename);
    }

you can increase your heap size..... try setting this as your environment variable.....
variable: JAVA_OPTS
value: -Xms512m -Xmx1024m -XX:PermSize=256m -XX:MaxPermSize=512m

Error while create sales order

Hi,
Please help.
I am facing error while create sales order.
No item category available (Table T184 OR VERP )
Message no. V1320
Diagnosis
No item category could be determined for the combination OR VERP .
System Response
The system does not allow further processing of this item.
Procedure
Check the entries in table T184 by means of which item category determination is controlled.
If you do not have the authorization to do this yourself, contact your system administrator.

Hi,
Check in spro whether Item categorygroup VERP is assigned to sales document type.if not assign.
Path
SPRO-SD-sales-sales douments-sales document item-assign item categories.

Error while creating sales order

while creating sales order for a particular plant there is error coming
NO NUMBER RANGE FOR DOC TYPE ZOS1VXBAK-AUARTSILD
PLANTXVBAK-VKBUR.
Intailly I have check the no series we have internal no series for all plant,the
number series which start 195000001, only one plant the giving the above error, rest all plant it is as applicable above series.
kindly guide me for the same.

Hi Sanjay
This is regarding number ranges defining and assigning tips which you can follow as below:
Whenever there is a new Sales Org being created, you will be required to maintain Number Ranges for Sales Documents which are allowed for your New Sales Area.
Number Ranges can be maintained Internally by the system, however it can be maintained externally also if you customize it accordingly.
In Standard SAP the Transaction code for Maintaiing Number ranges externally is VN01.
Defining - The same can be reached through in IMG as : Sales & Distribution>Sales>Sales Document Header-->Define Number Ranges for Sales Documents.
Here you provide the system a specific Number range as follows:
Number range Key Start Number range End Number Range+Current Number
For Example: If you want to propose the following Number Range
*1 9000076000 9000076999 0
The Current Number field will be kept zero as you are proposing new number range and no sales documents have been created on it , Obviously..
*1 is a Unique Two digit Alphanumeric Key, while proposing your key, you should ensure that it should not be there in the system as existing.
If you propose a key that is there in the system or if the Number Range (Start and End Series) is there in the system already, the system will throw a message that Interval already already exists. So choose a key that is unique, and which is not there in the system.
Here , by making this , you are assigning a Key to a Number Range Series.
All the symbols can be used along with numbers from 0 to 9 and Alphabets from A to Z and in any order. For example: !1, ^A, BB,Z*,M2.........
Assigning - In Assigning, you assign the particular Sales Document to the Number Range you have already proposed as above.
The Assigning Part is done as follows:
The Two digit Alpha Numeric Key is maintained or Assigned to the respective Sales Document type in V0V8.
This can also be reached in IMG by:
Sales & Distribution>Sales>Sales Document Header-->Define Sales Document Types
Locate the particular Sales Doc Type, and double click on it to display it configuration. Here you put the Two Digit Number key in the Field- "Number range External Assignment"
Besides this:
If a new Shipping Point is created then Delivery Number ranges are required to be maintained.
Similarly,
If a new Plant is created then Billing Number Ranges are required to be maintained.
Regards
Naren

Error while creating billing documents

Hi,
While creating billing documents I am getting error message as
Maintain customizing for excise and series group determination
Message no. 8I619
I have check the setting for CIN it is OK excise and series group are maintain properly so what can be the proble,
regards,
zafar

Hi,
Check once again customizing
Maintain Series Group - In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents. Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
- Define excise series groups based on type of outgoing document
- Assign series group to excise registration ID
- If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
- If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' Iindicator. Example - You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
- No account postings for CENVAT in sales cycle
- No utilization Flag
If you do not need any CENVAT utilization for an excise invoice but would like to just generate an excise invoice then you need to mark this indicator.
If the flag is checked then system will create an Excise invoice in the given Series group but there will not be any account postings or Part2 postings.
Immediate Utilization of CENVAT - Specifies that when you create an excise invoice, the system immediately pays the amount from CENVAT and creates the Part II entry. Such invoices will not be listed for fortnightly utilization.
If you have both fortnightly and immediate utilization for the same excise group, the account determination within CIN IMG should point to the ED interim account.
Thanks
Chidambaram

Revenue Recognition - error while creating sales order

Hi,
one of my colleague is having a Problem. Its very urgent. could you guys help.
I have used Revenue recog as"b" and Accrual start period as "a".
We are getting the error while creating a sales order, G/L account no. not found.
We have checked all the account assignment config but couldn't find anything.

Hi guys,
I have a question, we being SD consultants, do we deal with n e of the revenue issues, I am assuming we deal it to a really brief extent, but I am not familiar with the areas of doing it, so could someone please help me by letting me know the areas where we deal with those issues and how are they looked upon, any material would also be great.
Just in case, my email is : [email protected]
Look forward for a response
Thanks..

End of Valid Logistic Calender error while creating Sales Order

Hi,
While creating Sales order in VA01 the following error message comes for particular material code for a particular site only:
24.01.2202 date comes after end of valid logistics calendar. (Please
correct)
Message no. 61062
Can anyone suggest on the same.
Regards
Nilofer

Hi,
The input value given in Sales order is " Req Delivery date: 31.03.2012", but the error comes with the below date such as
"24.01.2202 date comes after end of valid logistics calendar.(Please correct)"
We also face one more error such as
" Incorrect index structure for table XMVERF_POS/0000224110/000040 ".
From where system is taking 24.01.2202 date?

Hi error while creating sales order

hi
i am getting 'not able to save' message while i am creating sales order.
how should i proceed to know where is the problem???
i tried debugging but it is taking lots of time, is there any other way i can know the reason for this error in standard code.
there is no wrong data entry while creating sales order.
i just want to know what are the ways to know where is the problem in the standard code.
thanx
rocky

hi ,
try too create a sales order after that check transaction code ST22 U WILL FIND AN SHORT DUMP then check in the source code extract an pointer will be visible where the error is coming and it will also show the program name , please read the dump analysis care fully
srinivas

Run time error while creating sales order in VA01

Dear all,
In our develpment server(ecc 6.0),while creating sales order in VA01 for a sales area, when ever entering material number and quantity and press enter, it is giving error and taking to Runtime error long text showing syntax error in program RK2LSFOC
application patch level for both production and development is same.
can any one suggest the solution please
Moderator message - Cross post locked
Edited by: Rob Burbank on Jan 7, 2010 10:03 AM

ths

Runtime error while creating sales order in VA01

Dear all,
In our develpment server(ecc 6.0),while creating sales order in VA01 for a sales area, when ever entering material number and quantity and press enter, it is giving error and taking to Runtime error long text showing syntax error in program RK2LSFOC
application patch level for both production and development is same.
can any one suggest the solution please

Please note the error details
Runtime Errors         SYNTAX_ERROR
Date and Time          07.01.2010 17:43:06
Short text
Syntax error in program "RK2LSFOC ".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLKEAK" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "RK2LSFOC " in include "RK2LSFOC
" in
line 128:
"No component exists with the name "KWBRUM". ."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP* "
Error in the ABAP Application Program
The current ABAP program "SAPLKEAK" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "RK2LSFOC ".
You can also perform the syntax check from the ABAP Editor.
If the problem persists, proceed as follows:
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
The following syntax error was found in the program RK2LSFOC :
"No component exists with the name "KWBRUM". ."
|    " "

Error while creating sales order with ref to contract

while creating sales order, with refernce to contract system is giving a message
Configuration not possible for material : Reason 3 --> Help
Message no. V1360
and the message is as follwed can any one explain
Diagnosis
This may have been caused by one of the following:
1. The configuration profile for the material allows or requires the bill of materials to be exploded during order processing. However, a plant has not been specified in the item.
2. The configuration profile of the material allows or requires the bill of materials to be exploded during order processing, but the order quantity in the item must be greater than 0.
3. A configuration profile has not been maintained
or
A configuration is not permitted for the material
or
4. The configuration profile of the material allows or requires the bill ofmaterials to be exploded during order processing. However, the system could not determine a date because important data is missing from the item (see incompletion log).

Hi
I think you have both Variant configuration and BOM.
Pls ensure the following.
1. BOM masterdata is maintained for the variants
2. Variant configuration is configured correctly
Configuration profile is created for the material
Knowledge base object and run time version are available
3. Maintain materials as not relevant for delivery or dont give delivery quantity as 0
Once you are sure that these are in proper shape, you can start creating order. The problem wont come.
Reward points if it helps you.

Error while creating sales order for material with another DIVISION

Hello Friends,
I have a problem with my sales order creation.
I have defined a new sales area 0010 / 10 / 01. I have the sales order type assigned to this sales area. (in VOV8 for the sales order type, in the 'General Control' the 'item division' is flagged.
Now, I have created the sold to party XYZ with all the partner functions defaulted same as the sold to party for the sales area 0010 / 10 / 01.
NOW, I have the material ABC with the DIVISION 10 in the basic data. I have extended the material to my sales org & dist. channel & plant.
Now, while creating the sales order for my sales area 0010 / 10 / 01 , I enter the sold to party XYZ - it is OK. But when I enter the material ABC, I get the error - "SHIP TO PARTY IS NOT DEFINED FOR SALES AREA 0010 / 10 / 10"
Please help to resolve the issue.
Edited by: Vivek on Aug 13, 2009 9:04 AM

Hi
Common division for Material Master data will not work
Because in the material master Division is a field not an organizational unit
Means when you create MMR you will give sales org, DC, Plant as organizational units and then enter but not division
Division is a field maintained in basic data and sales org data 1
This is the reason in t code you will find in t code VOR2 Common division only customer and conditions but not materials
But in t code VOR1 Common DC ,customer conditions and materials all there are available (you can check these t codes)
Coming to your issue Item div is clecked in your order type
This means the division in MMR has the priority or control for that order type
Your header division is 01 ( taken from customers sales area) and item division is 10 (taken from MMR as per your post)
So it differs
To process this order with Item div is clecked in your order type you need to extend your Sold to party ABC to the sales area 0010/10/10 (the sales area where the division of the material falls)
or alternatively
There should be a customer say DEF created in sales area 0010/10/10 who will be a ship to party ( your error is also the same)
for your ABC that is sold to party in sales area 0010/10/01 where the order is registered
Hope yopu are getting it
ABC in sales area 0010/10/01 will have or should have ship to paty DEF in sales area 0010/10/10
or
ABC should operate in in sales area 0010/10/10 too
If item division is not ticked then these are not necessary as the header division 01 will be valid for all items and syatem will not look MMR at all for division
Regards
Raja

Error while creating sales order with ref using SD_SALESDOCUMENT_CREATE

Hi
I am creating sales order with reference using function module SD_SALESDOCUMENT_CREATE , while creating i am getting error
Document doesn't have document category even thougth i am passing document category in header as well as item lavel.
In VBUK table there is no value for VGTYP.
Can you please help me how to resolve it.
Thanks & regards
kiran

Problem resolved by passing REFDOC_CAT in the FM along with SD_DOC_CAT.
Thanks

Error While Creating Sales Document - on a new rollout

Similar Messages

Maybe you are looking for