Error while creating sales order with ref to contract

while creating sales order, with refernce to contract system is giving a message
Configuration not possible for material : Reason 3 --> Help
Message no. V1360
and the message is as follwed can any one explain
Diagnosis
This may have been caused by one of the following:
1. The configuration profile for the material allows or requires the bill of materials to be exploded during order processing. However, a plant has not been specified in the item.
2. The configuration profile of the material allows or requires the bill of materials to be exploded during order processing, but the order quantity in the item must be greater than 0.
3. A configuration profile has not been maintained
or
A configuration is not permitted for the material
or
4. The configuration profile of the material allows or requires the bill ofmaterials to be exploded during order processing. However, the system could not determine a date because important data is missing from the item (see incompletion log).

Hi
I think you have both Variant configuration and BOM.
Pls ensure the following.
1. BOM masterdata is maintained for the variants
2. Variant configuration is configured correctly
Configuration profile is created for the material
Knowledge base object and run time version are available
3. Maintain materials as not relevant for delivery or dont give delivery quantity as 0
Once you are sure that these are in proper shape, you can start creating order. The problem wont come.
Reward points if it helps you.

Similar Messages

Error while creating sales order with ref using SD_SALESDOCUMENT_CREATE

Hi
I am creating sales order with reference using function module SD_SALESDOCUMENT_CREATE , while creating i am getting error
Document doesn't have document category even thougth i am passing document category in header as well as item lavel.
In VBUK table there is no value for VGTYP.
Can you please help me how to resolve it.
Thanks & regards
kiran

Problem resolved by passing REFDOC_CAT in the FM along with SD_DOC_CAT.
Thanks

Error while creating sales order with network/project

Dear All,
we are getting the following message while creating a sales order with assembly processing with network/project system .
The standard Network used as a reference contains assignments to a standard WBS. However you have maintained WBS assignments manually.which assignment should be used?
manually maint pre-defined
reward points are assured for valuable help.
thanking you
Best regards,
R.Srinivasan

Dear Murali,
Thankyou very much for your reply.We have checked for these things which you have mentioned.
ie
Assignment of Standard WBS in the Standard network and WBS Assignment of Operastional network.We are still getting this error.
Kindly let me know What are the other possibilities for this error.
Thanking you,
Best regards,
R.Srinivasan

Error while create sales order

Hi,
Please help.
I am facing error while create sales order.
No item category available (Table T184 OR VERP )
Message no. V1320
Diagnosis
No item category could be determined for the combination OR VERP .
System Response
The system does not allow further processing of this item.
Procedure
Check the entries in table T184 by means of which item category determination is controlled.
If you do not have the authorization to do this yourself, contact your system administrator.

Hi,
Check in spro whether Item categorygroup VERP is assigned to sales document type.if not assign.
Path
SPRO-SD-sales-sales douments-sales document item-assign item categories.

How to create a Sales order with ref to Contract using Function Module

How to create a Sales order with ref to Contract using Function Module BAPI_SALESDOCU_CREATEFROMDATA ?

We have a unique situation where we like change the sold-to customer of the sales order
once order has been created. These orders have been created using either by function module
BAPI_SALESDOCUMENT_COPY or using BDC (VA01, Copy with reference).
These two processes work abosolutely fine except someone might have change the sold-to
customer of the ship-to customer of the original sales order. If this the case then the new
sales order will be created with the old sold-to and with not the new sold-to.
We tried using BAPI_SALESDOCUMENT_CHANGE and commit afterwards. We checked
the returned parameteres of the BAPIs and they are all successful but sold-to remains the
same old one.
Any help would be much more appreciated.

BAPI to create Sales Order with reference to contract

Hi All,
I am trying to create Sales Order with reference to Contract, but although the
order gets created, it does not contain reference document information.
The BAPI I am using is BAPI_SALESORDER_CREATEFROMDAT2.
Would someone know which parameters I have to papulate,or have any other suggestion
how to accomplish my task?
Thank you so much,
Mayank

Hi - Try Filling these three fields in the Item details.
REF_DOC
REF_DOC_IT
REF_DOC_CA
Reward points if helpful

Error while creating sales order

while creating sales order for a particular plant there is error coming
NO NUMBER RANGE FOR DOC TYPE ZOS1VXBAK-AUARTSILD
PLANTXVBAK-VKBUR.
Intailly I have check the no series we have internal no series for all plant,the
number series which start 195000001, only one plant the giving the above error, rest all plant it is as applicable above series.
kindly guide me for the same.

Hi Sanjay
This is regarding number ranges defining and assigning tips which you can follow as below:
Whenever there is a new Sales Org being created, you will be required to maintain Number Ranges for Sales Documents which are allowed for your New Sales Area.
Number Ranges can be maintained Internally by the system, however it can be maintained externally also if you customize it accordingly.
In Standard SAP the Transaction code for Maintaiing Number ranges externally is VN01.
Defining - The same can be reached through in IMG as : Sales & Distribution>Sales>Sales Document Header-->Define Number Ranges for Sales Documents.
Here you provide the system a specific Number range as follows:
Number range Key Start Number range End Number Range+Current Number
For Example: If you want to propose the following Number Range
*1 9000076000 9000076999 0
The Current Number field will be kept zero as you are proposing new number range and no sales documents have been created on it , Obviously..
*1 is a Unique Two digit Alphanumeric Key, while proposing your key, you should ensure that it should not be there in the system as existing.
If you propose a key that is there in the system or if the Number Range (Start and End Series) is there in the system already, the system will throw a message that Interval already already exists. So choose a key that is unique, and which is not there in the system.
Here , by making this , you are assigning a Key to a Number Range Series.
All the symbols can be used along with numbers from 0 to 9 and Alphabets from A to Z and in any order. For example: !1, ^A, BB,Z*,M2.........
Assigning - In Assigning, you assign the particular Sales Document to the Number Range you have already proposed as above.
The Assigning Part is done as follows:
The Two digit Alpha Numeric Key is maintained or Assigned to the respective Sales Document type in V0V8.
This can also be reached in IMG by:
Sales & Distribution>Sales>Sales Document Header-->Define Sales Document Types
Locate the particular Sales Doc Type, and double click on it to display it configuration. Here you put the Two Digit Number key in the Field- "Number range External Assignment"
Besides this:
If a new Shipping Point is created then Delivery Number ranges are required to be maintained.
Similarly,
If a new Plant is created then Billing Number Ranges are required to be maintained.
Regards
Naren

End of Valid Logistic Calender error while creating Sales Order

Hi,
While creating Sales order in VA01 the following error message comes for particular material code for a particular site only:
24.01.2202 date comes after end of valid logistics calendar. (Please
correct)
Message no. 61062
Can anyone suggest on the same.
Regards
Nilofer

Hi,
The input value given in Sales order is " Req Delivery date: 31.03.2012", but the error comes with the below date such as
"24.01.2202 date comes after end of valid logistics calendar.(Please correct)"
We also face one more error such as
" Incorrect index structure for table XMVERF_POS/0000224110/000040 ".
From where system is taking 24.01.2202 date?

Runtime error while creating sales order in VA01

Dear all,
In our develpment server(ecc 6.0),while creating sales order in VA01 for a sales area, when ever entering material number and quantity and press enter, it is giving error and taking to Runtime error long text showing syntax error in program RK2LSFOC
application patch level for both production and development is same.
can any one suggest the solution please

Please note the error details
Runtime Errors         SYNTAX_ERROR
Date and Time          07.01.2010 17:43:06
Short text
Syntax error in program "RK2LSFOC ".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLKEAK" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "RK2LSFOC " in include "RK2LSFOC
" in
line 128:
"No component exists with the name "KWBRUM". ."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP* "
Error in the ABAP Application Program
The current ABAP program "SAPLKEAK" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "RK2LSFOC ".
You can also perform the syntax check from the ABAP Editor.
If the problem persists, proceed as follows:
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
The following syntax error was found in the program RK2LSFOC :
"No component exists with the name "KWBRUM". ."
|    " "

Error while creating sales order using SD_SALESDOCUMENT_CREATE

Hello All,
We are using to SD_SALESDOCUMENT_CREATE function module to create sales order it is working fine for single material.
When we try to create sales order with multiple matearials we ended up with the following errors
SALES_HEADER_IN has been processed successfully
000000
VBAKKOM
Internal error in communication between configuration and sales doc.CONFIGURATION_PROCESSING
000000
CONFIGURATION_PROCESSING
Error in SALES_ITEM_IN 000010
000000
VBAPKOM
Internal error in communication between configuration and sales doc.CONFIGURATION_PROCESSING
000000
CONFIGURATION_PROCESSING
Error in SALES_ITEM_IN 000020
000000
VBAPKOM
SALES_ITEM_IN has been processed successfully
000000
VBAPKOM
Could any one help me out to resolve this issue.
Thanks in advance....
Cheers,
Harsha

Hello,
Looking at BAPI errors. It looks like you are trying to create sales order with variant configuration.
Check Below SAP Note.
900380 - Configurable items in the SD process (idocs & bapis)
Regards,
Sameer

Hi error while creating sales order

hi
i am getting 'not able to save' message while i am creating sales order.
how should i proceed to know where is the problem???
i tried debugging but it is taking lots of time, is there any other way i can know the reason for this error in standard code.
there is no wrong data entry while creating sales order.
i just want to know what are the ways to know where is the problem in the standard code.
thanx
rocky

hi ,
try too create a sales order after that check transaction code ST22 U WILL FIND AN SHORT DUMP then check in the source code extract an pointer will be visible where the error is coming and it will also show the program name , please read the dump analysis care fully
srinivas

Run time error while creating sales order in VA01

Dear all,
In our develpment server(ecc 6.0),while creating sales order in VA01 for a sales area, when ever entering material number and quantity and press enter, it is giving error and taking to Runtime error long text showing syntax error in program RK2LSFOC
application patch level for both production and development is same.
can any one suggest the solution please
Moderator message - Cross post locked
Edited by: Rob Burbank on Jan 7, 2010 10:03 AM

ths

Problem with BOM Quant while creating Sales order with reference using BAPI

Dear All,
I am facing problem with creating a slaes order with reference to other sales order by using BAPI_SALESORDER_CREATEFROMDAT2 .
Sales order is getting created but
1. It exploding the BOM means the line items which are not there in the reference SO also coming in the new SO ( all BOM items are coming )
2. Schedule line for BOM header item is getting copied to all sub items of BOM.
Can any one help me out to prevent the above deviations in creating Sales order with reference by using BAPI_SALESORDER_CREATEFROMDAT2.
Note: while passing the parameters to BAPI_SALESORDER_CREATEFROMDAT2
all the data related to items is exactly the same as in the original Sales Order.
Thanks in advnace.
Regards,
John

Hi All,
Can any one help me !!!!!!!!!!
please

Issue in creating sales order with ref contract(quantity)

hi friends,
I am creating sales order with reference contract using
"BAPI_SALESORDER_CREATEFROMDAT1"
my issue is with quantity field when i am entering quantity as 1 then it is taking as 0.001
i am also declaring its unit field too but there is no change.
in my program i am taking quantity as parameter.
field description is like this Order qty in sales units - 00009001 corresponds to 9.001
is there any chance of changing the quantity .
please help.

There is another similar post...look at those comments. Consider the data types in use...in true numeric fields with decimals, the decimal is implied, so look at how you're sending and/or converting any value.... For instance, if I were sending data to a quantity field described as curr 15, decimals 3, I would expect that I needed to send 1.000 (or perhaps 1000, depending on my testing) in the input to get a quantity of 1.

Avoid substitute material.., while creating sales order with BAPI?

Hi experts.
I use BAPI_SALESDOCU_CREATEFROMDATA1 function module to create a sales order.
Material A has a substitute material B with substitute reason 0005.
So if I use material A when creating sales order with above BAPI function, the order is created with material B.
I don't want to substitute the material automatically. I want to create the sales order with material A.
What should I do? Help me please.
Thanks in Advance.

Hi bvrn Reddy,
I know, your message is almost two years old, but, did you find a solution? I'm facing the same problem. The material A has B as substitute, but in va01 a popup appears (its customizing inside the substitution reason, strategy = A). Of course, we have no popup inside the bapi, but there must be a way to decide which material the bapi should use. At the moment I only get the substitute, never the old mat (even there is something in stock).
Maybe you've got a helpful hint for me, thanks!
Ben

Error while creating sales order with ref to contract

Similar Messages

Maybe you are looking for