Error while creating standby database for ebs prod database
Hi,
We are getting error while trying to create a standby database for EBS database by using RMAN DUPLICATE commands,
Steps followed:
1.) Backup the primary database (Ebs PROD db). This was done on 12-Mar-2012
***RMAN backups are scheduled to run @10:00 pm every night. Flash Recovery Area has been configured and backup is taken at this location
everyday.
2.) Tar the backupset, autobackup, archivelogs etc in FRA .... and copy this to the target server (STANDBY).
*** Copy(oracle rdbms binaries and FRA) completed @12:00AM on 14-Mar-2012
3.) Tried to create standby database by using RMAN duplicate on 14-Mar-2012
RMAN> rman sys/sys@PROD auxiliary /
RMAN> duplicate target database for standby dorecover nofilenamecheck;
After, some time the RMAN DUPLICATE process errors out with,
ORA-19563: header validation failed for file
We are not sure about the cause of this error. While searching in Metalink, we got several notes (ex, 352074.1) but all the causes stated for this error
are not applicable in our case. We double checked our instance to confirm this.
We have also found that in PROD database there are 65 datafiles and after the RMAN DUPLICATE errors out in the targer server (STANDBY) the RMAN managed to restore 51 datafiles before erroring out.
# Please note PROD database was also backed up on 13-Mar-2012. We have a suspicion that backup on 13-Mar may be a possible cause for this error but we are
not sure.
Need suggestions if there can be any other possible causes???
We are in a fix and it would be appreciable if we get some quick suggestions..
Regards,
Rupdipt
Edited by: orarup on Mar 14, 2012 12:29 AM
When opening the file to be placed in a copy or backup set, to be inspected, or used as the target for an incremental restore, its header was not recognized as a valid file header for a file of the indicated type (data file, archived log, or control file) belonging to the current database.
Kindly Ensure that the correct files are being specified for the copy or backup operation.
Regs,
Bhavi Savla.
Similar Messages
-
Gating error while creating standby database in oracle 11g
Dear Gurus
I am getting following error while creating standby database. My database version is oracle 11g 11.2.0.1 in Redhat 5.2
RMAN> duplicate target database for standby from active database;
Starting Duplicate Db at 10-MAY-12
using channel ORA_AUX_DISK_1
contents of Memory Script:
backup as copy reuse
targetfile '/oracle/product/11.2.0/dbhome_1/dbs/orapworcl' auxiliary format
'/oracle/product/11.2.0/dbhome_1/dbs/orapwstdb' ;
executing Memory Script
Starting backup at 10-MAY-12
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 05/10/2012 15:44:18
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 05/10/2012 15:44:18
ORA-17629: Cannot connect to the remote database server
ORA-17627: ORA-12528: TNS:listener: all appropriate instances are blocking new connections
ORA-17629: Cannot connect to the remote database server
RMAN>
Regards
RabiHello;
Generally for the connection to work you need to add something like this to the listener.ora file :
(SID_DESC =
(global_dbname = STANDBY.hostname)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0.2)
(sid_name = STANDBY)
)You should stop and start the listener on the Standby after adding this. Also your tnsnames.ora must be correct on both the primary and the Standby.
Also you need an INIT for the Standby side :
STANDBY.__db_cache_size=343932928
STANDBY.__java_pool_size=4194304
STANDBY.__large_pool_size=4194304
STANDBY.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
STANDBY.__pga_aggregate_target=281018368
STANDBY.__sga_target=834666496
STANDBY.__shared_io_pool_size=0
STANDBY.__shared_pool_size=469762048
STANDBY.__streams_pool_size=0
audit_file_dest='/u01/app/oracle/admin/PRIMARY/adump'
audit_trail='db'
compatible='11.2.0.0.0'
control_files='/u01/app/oracle/oradata/PRIMARY/control01.ctl','/u01/app/oracle/oradata/PRIMARY/control02.ctl'
db_block_size=8192
db_domain='SOME.DOMAIN.COM'
db_flashback_retention_target=2880
db_name='PRIMARY'
db_recovery_file_dest_size=2147483648
db_recovery_file_dest='/u01/app/oracle/flash_recovery_area'
diagnostic_dest='/u01/app/oracle'
dispatchers='(PROTOCOL=TCP) (SERVICE=PRIMARYXDB)'
log_archive_dest_1='LOCATION=USE_DB_RECOVERY_FILE_DEST'
open_cursors=300
pga_aggregate_target=277872640
processes=150
remote_login_passwordfile='EXCLUSIVE'
sga_target=833617920
undo_tablespace='UNDOTBS1'
log_archive_dest_1='LOCATION=USE_DB_RECOVERY_FILE_DEST VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=STANDBY'
log_archive_dest_2='SERVICE=PRIMARY LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) '
LOG_ARCHIVE_DEST_STATE_1=ENABLE
LOG_ARCHIVE_DEST_STATE_2=DEFER
LOG_ARCHIVE_MAX_PROCESSES=30
FAL_SERVER=STANDBY
STANDBY_FILE_MANAGEMENT=AUTO
DB_UNIQUE_NAME=STANDBYFinally
startup nomount
Start RMAN and issue duplicate command
$ORACLE_HOME/bin/rman target=sys/@primary auxiliary=sys/@standby
RMAN>duplicate target database for standby from active database NOFILENAMECHECK;
Keys to success
1. New Standby start NOMOUNT on new password file. ( On Oracle 11 you must copy and rename the file from Primary server )
2. Hard coded listener on new Standby server.
3. Correct tnsnames.ora files.
4. Correct duplicate command.
Please consider closing some of you old answered questions
Best Regards
mseberg
Edited by: mseberg on May 10, 2012 7:06 AM -
Error while creating a task for creating an generic task /app/dac/CustomSQ
Hi ,
I have created a sql file in DAC server /app/dac/CustomSQLs/ ,just to fire an update sql in database
In DAC task tab i have created a task with the following:
Command for incremental load :/app/dac/CustomSQLs/DBNameBeforeLoad.sql
Primary source :flatfileconnection
target source:DBCONNECTION_OLAP
Execution type:SQL FILE
Task phase:GENERAL
I created subject area and assembled ,then created a Execution plan.
When i try to execute this EP ,it shows the following error in DAC log:
ANOMALY INFO::: Error while creating a task for creating an generic task /app/dac/CustomSQLs/DBNameBeforeLoad.sql
MESSAGE:::/app/dac/CustomSQLs/DBNameBeforeLoad.sql - invalide template name!
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.TaskInitializationException
com.siebel.analytics.etl.etltask.SQLFileTask.doInit(SQLFileTask.java:69)
com.siebel.analytics.etl.etltask.GenericTaskImpl.init(GenericTaskImpl.java:194)
Does my above configuration is correct ..?verify the following settings:
1. mapping of ECC plant and storage location and logical system number with the appropriate availability group code since this links the stock types in EWM to ECC org elements (SPRO -> EWM -> Interfaces -> ERP Integration -> Goods movement)
2. ensure the availability group configuration is correct (SPRO -> EWM -> GR Process -> Configure availability group for putaway) - check all applicable nodes in this configuration since the availability group code is assigned in the pertinent storage types -
Error while Creating a formula for field AZNOR (T-Code : OP17)
Dear Experts,
i am facing a problem in Transaction OP17 while creating a formula for field AZNOR ( No of indivual capacity in work center) in work center (T-Code : CR02) .
It shows the error
The data object "F" has no component called "AZNOR''..
Please let me know the solution..
Thanks & Regards
Birendra KumarHi,
I have the same problem.
Could You tell me witch is the correct origin?
Thanks a lot!
Bye
Laura -
Error while creating datasource userdsn for oracle 10g Errorcode (998)
while creating datasource userdsn for oracle 10g i am getting error "The setup routines for the oracle in OraDb10g_home1 odbc driver could not be loaded due to system error code 998" please give reply soon
Thanks for your reply , Steve.
I noticed that there is a default datasouce on the EM with the following parameters:
<data-source
class="com.evermind.sql.DriverManagerDataSource"
name="OracleDS"
location="jdbc/OracleCoreDS"
xa-location="jdbc/xa/OracleXADS"
ejb-location="jdbc/OracleDS"
connection-driver="oracle.jdbc.driver.OracleDriver"
username="scott"
password="->pwForScott"
url="jdbc:oracle:thin:@localhost:1521:oracle"
inactivity-timeout="30"
/>
The location and xa-location attributes that I use for my "test" data source are the same as the default one. So, could this be the issue?
What should be the values for location and xa-location attributes from my "test" data source?
Any help will be greatly appreciated.
Thanks,
Shyam -
Error while creating logical port for Consumer Proxy in SOAMANGER
Hi,
While creating logical port for my consumer proxy in SOAMANGER, I am getting the error shown below
SRT Framework exception: HTTP: Current user does not have the required authorization to access the HTTP destination
I have searched in the forums but none of the answers helped me.
I have specifed my PI user ID and password and the user has the followwing roles assigned to it.
SAP_BC_WEBSERVICE_SERVICE_USER
SAP_BC_WEBSERVICE_ADMIN_TEC
SAP_BC_WEBSERVICE_CONSUMER
SAP_BC_WEBSERVICE_ADMIN
Current user in the error message refers to the PI user that i have specified or the user with which i have logged in the backend ABAP system?
Please help me reslove this issue.
Thanks and regards
Sreehari NambiarHi,
Please add the following roles as well.
SAP_BC_WEBSERVICE_ADMIN_BIZ
SAP_BC_WEBSERVICE_DEBUGGER
SAP_BC_WEBSERVICE_OBSERVER
Also make sure that you are doing the role comparison after adding all SAP* roles in your profile.
Let me know if this works?
Thanks,
Sridhar -
Getting the following error while creating the model for webdynpro app.
Plugin Name: Web Dynpro Model Editor Services
Plugin ID : com.sap.ide.webdynpro.service.modeleditor
Class :ap.ide.webdynpro.modeleditor.wizards.model. creation.ModelDialog
Method : nextPressed
Exception : org.eclipse.swt.SWTException: Failed to execute runnable (java.lang.NoClassDefFoundError)
This is the error i am getting while creating the model for the webdynpro application. Can some one help ?
Thanks & Regards
Lalithhi
This error occurs mainly due to the reason that particular plugin is not there in the NWDS.
So please try to reinstall the NWDS or try tracing out whether that particular plugin is there or not.
Thank,
kris -
Getting error while creating standby database
I am creating standby database in oracle 10.2 on windows (same machine)and getting following error.Could any one please suggest me on this.
on primary database alert log file
================================================
Error 1031 received logging on to the standby
Fri Jul 17 18:09:23 2009
Errors in file c:\oracle\product\10.2.0\admin\orcl\bdump\orcl_arc0_4512.trc:
ORA-01031: insufficient privileges
PING[ARC0]: Heartbeat failed to connect to standby 'IDR'. Error is 1031.
================================================
my LISTENER file is as below
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = Orcl)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(SID_NAME = Orcl)
(SID_DESC =
(GLOBAL_DBNAME = idr)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(SID_NAME = idr)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = Gaurav-PC)(PORT = 1521))
and tns file is as below
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = Gaurav-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
IDR =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = Gaurav-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = IDR)
)recreate the instance at standby database without password file
oradim -new -IDR standby -startmode manual recreate password file at primary database , copy the same password file from primary database to standby database,also make sure primary database started with REMOTE_LOGIN_PASSWORDFILE=EXCLUSIVE parameter.
Check also the primary database is able to tnsping to standby database.
Khurram -
Error while creating external alias for BSPs & DMS
Hello All,
Has anybody encountered the below error dump while creating the external aliases for Business Server Pages and Document Management Service?
The error dump I have received is "ITAB_DUPLICATE_KEY"
"A Row with same key already exists"
The error has ocurred in the program "RSICFTREE".
I am getting this above described error while navigating to the "Target Element" tab.
Can anybody help pls?
best regds,
Alagammai.Hi Tony,
Somehow I solved this issue. I dont remember what exactly I did, as it was sometime back in December. I think I used the Wizard initially to do the configurations in Solution Manager and again i tried to do the same manually as the earlier one threw some errors.
It seems the wizard proceeded half-way through and hence the entry was made in the database already and hence that error.
Anyways thank you for replying me.
best regds,
Alagammai. -
Error while creating a query for my custom infotype
Hi,
I have created a custom infotype with fields currency amount and currency field .
While I am creating a query for it its giving an error
Message no. AQ_AD_HOC221 Error when generating the report(see long text )
I tried to execute the standard program RPUMS40CCI but still I am facing same error .
I have also maintained table T777i for my infotype but still problem exists.
Please help.
PHi
Check in PM01 -
Error while creating jco connection for metadata?
Hi all,
we are using ep 6 sp 16.
I could create the JCO connection for application data but i am not able to create the jco connection for metadata for the same r3 server .
while creating the the connection
system name and logon group and disable
and when i click finish
it is giving following error
Failed to create new JCO client connection testmetadata: com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscapeException: Error while obtaining JCO connection. at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.getJCOClientConnection(SystemLandscapeFactory.java:150) at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.createJCOClientConnection(SystemLandscapeFactory.java:356) at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.createJCOClientConnection(WDSystemLandscape.java:107) at com.sap.tc.webdynpro.tools.sld.ButtonBar.onActionFinish(ButtonBar.java:224) at com.sap.tc.webdynpro.tools.sld.wdp.InternalButtonBar.wdInvokeEventHandler(InternalButtonBar.java:265) at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87) at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67) at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleAction(WebDynproMainTask.java:101) at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleActionEvent(WebDynproMainTask.java:304) at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:659) at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59) at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:251) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:55) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(AccessController.java:180) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Caused by: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to resolve connection parameter for testmetadata at com.sap.tc.webdynpro.serverimpl.wdc.sl.JCOClientConnection.resolveConnectionParameter4MsgServerJCODestination(JCOClientConnection.java:670) at com.sap.tc.webdynpro.serverimpl.wdc.sl.JCOClientConnection.resolveConnectionParameter(JCOClientConnection.java:486) at com.sap.tc.webdynpro.serverimpl.core.sl.AbstractJCOClientConnection.init(AbstractJCOClientConnection.java:252) at com.sap.tc.webdynpro.serverimpl.core.sl.AbstractJCOClientConnection.<init>(AbstractJCOClientConnection.java:226) at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.getJCOClientConnection(SystemLandscapeFactory.java:148) at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.createJCOClientConnection(SystemLandscapeFactory.java:356) at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.createJCOClientConnection(WDSystemLandscape.java:107) at com.sap.tc.webdynpro.tools.sld.ButtonBar.onActionFinish(ButtonBar.java:224) at com.sap.tc.webdynpro.tools.sld.wdp.InternalButtonBar.wdInvokeEventHandler(InternalButtonBar.java:265) at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87) at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67) at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleAction(WebDynproMainTask.java:101) at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleActionEvent(WebDynproMainTask.java:304) at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:659) at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59) at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:251) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:55) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(AccessController.java:180) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Caused by: java.lang.NullPointerException at java.util.Hashtable.put(Hashtable.java:606) at com.sap.tc.webdynpro.serverimpl.wdc.sl.JCOClientConnection.resolveConnectionParameter4MsgServerJCODestination(JCOClientConnection.java:564) at com.sap.tc.webdynpro.serverimpl.wdc.sl.JCOClientConnection.resolveConnectionParameter(JCOClientConnection.java:486) at com.sap.tc.webdynpro.serverimpl.core.sl.AbstractJCOClientConnection.init(AbstractJCOClientConnection.java:252) at com.sap.tc.webdynpro.serverimpl.core.sl.AbstractJCOClientConnection.<init>(AbstractJCOClientConnection.java:226) at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.getJCOClientConnection(SystemLandscapeFactory.java:148) at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.createJCOClientConnection(SystemLandscapeFactory.java:356) at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.createJCOClientConnection(WDSystemLandscape.java:107) at com.sap.tc.webdynpro.tools.sld.ButtonBar.onActionFinish(ButtonBar.java:224) at com.sap.tc.webdynpro.tools.sld.wdp.InternalButtonBar.wdInvokeEventHandler(InternalButtonBar.java:265) at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87) at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67) at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleAction(WebDynproMainTask.java:101) at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleActionEvent(WebDynproMainTask.java:304) at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:659) at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59) at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:251) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:55) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(AccessController.java:180) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Thanking.
RajendraHello Rajendra,
Good to hear from u. Let me try to give a soln for this problem of yours.
I think probably the logon group has not been specified in the backend.If thats the case then do the following:
Connect to the backend server for which you are trying to create the JCO. Run the transaction SMLG. It will show u the existing logon groups. carry out the following steps if the 'PUBLIC' group is not present in the list of logon groups.
Click on the create button. In the pop-up, type the logon as 'PUBLIC'. For the instance, select the F4 help and choose the existing instance number. Click on copy and click save. Try running the transaction /nsmlg and now it should show the logon group 'PUBLIC'.
When you create the JCO connection, it should now show the logon group 'PUBLIC'.
Regards,
Prathamesh. -
Error while creating Ear File for project Containing (WAR+MAR) in jdev
hi,
I am trying to deploy my adf application containing MDS customization.While creating EAR from application properties--->deploy--->deploye to EAR i am getting following error.
Wrote MAR file to C:\JDeveloper\mywork\MDSApp\deploy\AutoGeneratedMar.mar
[04:40:07 PM] Wrote Web Application Module to C:\JDeveloper\mywork\MDSApp\ViewController\deploy\MDSApp_ViewController_webapp1.war
*[04:40:07 PM] Warning: Some of the customization documents under '/' are packaged as part of WAR. This metadata cannot be accessed from WAR using MDS.*
*[04:40:07 PM] Info: Namespace '/xliffbundles' is mapped to deploy-target metadata-store-usage 'MAR_TargetRepos' in adf-config.xml but no metadata from the namespace is included in the MAR*.
[04:40:07 PM] Wrote Enterprise Application Module to C:\JDeveloper\mywork\MDSApp\deploy\MDSApp_application1.ear
[04:40:07 PM] Elapsed time for deployment: 4 seconds
[04:40:07 PM] ---- Deployment finished. ----
my adf-config.xml is as below
<?xml version="1.0" encoding="windows-1252" ?>
<adf-config xmlns="http://xmlns.oracle.com/adf/config"
xmlns:adf="http://xmlns.oracle.com/adf/config/properties"
xmlns:sec="http://xmlns.oracle.com/adf/security/config">
<adf:adf-properties-child xmlns="http://xmlns.oracle.com/adf/config/properties">
<adf-property name="adfAppUID" value="MDSApp-3718"/>
</adf:adf-properties-child>
<sec:adf-security-child xmlns="http://xmlns.oracle.com/adf/security/config">
<CredentialStoreContext credentialStoreClass="oracle.adf.share.security.providers.jps.CSFCredentialStore"
credentialStoreLocation="../../src/META-INF/jps-config.xml"/>
<sec:JaasSecurityContext initialContextFactoryClass="oracle.adf.share.security.JAASInitialContextFactory"
jaasProviderClass="oracle.adf.share.security.providers.jps.JpsSecurityContext"
authorizationEnforce="true"
authenticationRequire="true"/>
</sec:adf-security-child>
<adf-mds-config xmlns="http://xmlns.oracle.com/adf/mds/config">
<mds-config xmlns="http://xmlns.oracle.com/mds/config" version="11.1.1.000">
<cust-config>
<match path="/">
<customization-class name="oracle.model.mycompany.SiteCC"/>
<customization-class name="oracle.adf.share.config.UserCC"/>
</match>
</cust-config>
<persistence-config>
<metadata-namespaces>
<namespace path="/xliffbundles" metadata-store-usage="MAR_TargetRepos"/>
</metadata-namespaces>
<metadata-store-usages >
<metadata-store-usage id="MAR_TargetRepos" deploy-target="true">
<metadata-store class-name="oracle.mds.persistence.stores.db.DBMetadataStore">
<property name="jndi-datasource" value="jdbc/mds/DEV_MDS"/>
<property name="partition-name" value="part1"/>
</metadata-store>
</metadata-store-usage>
</metadata-store-usages>
</persistence-config>
</mds-config>
</adf-mds-config>
<adf-faces-config xmlns="http://xmlns.oracle.com/adf/faces/config">
<taglib-config>
<taglib uri="http://xmlns.oracle.com/adf/faces/rich">
<tag name="column">
<attribute name="displayIndex">
<persist-changes>true</persist-changes>
</attribute>
<attribute name="frozen">
<persist-changes>true</persist-changes>
</attribute>
<attribute name="noWrap">
<persist-changes>true</persist-changes>
</attribute>
<attribute name="selected">
<persist-changes>true</persist-changes>
</attribute>
<attribute name="visible">
<persist-changes>true</persist-changes>
</attribute>
<attribute name="width">
<persist-changes>true</persist-changes>
</attribute>
</tag>
<tag name="showDetailHeader">
<attribute name="disclosed">
<persist-changes>true</persist-changes>
</attribute>
</tag>
<tag name="panelSplitter">
<attribute name="collapsed">
<persist-changes>true</persist-changes>
</attribute>
<attribute name="splitterPosition">
<persist-changes>true</persist-changes>
</attribute>
</tag>
</taglib>
</taglib-config>
<persistent-change-manager>
<persistent-change-manager-class>oracle.adf.view.rich.change.MDSDocumentChangeManager</persistent-change-manager-class>
</persistent-change-manager>
</adf-faces-config>
</adf-config>hi frank,
If you have any idea plz reply...We r stucked with metadat-namespace path attribute. -
Error while creating del document for an STO
All SAP Gurus,
recently we have done a upgradation from sap 4.7 to ecc 6.0. after thet While creating outbound delivery (doc type JF) against an STO, i am getting following error
"50001251 000000 document is incopmlete: You can not save the delivery."
where as i have thoroughly checked the STO and did not found anything.
detail of error is given below:-
Diagnosis
When the system checked whether saving delivery was
permitted, it determined that the requirements stored in
Define Incompletion Procedures for this document do not
allow this subsequent function.
System response
The system does not permit this subsequent function.
Procedure
o If this message appears during online processing, you
can edit the document by choosing Edit -> Log of
incomplete items.
o If the message appeared during background processing,
you can analyze the problem by regenerating the
delivery.
please help,
BKRHi Biplab,
For the error, Check SAP Note 429354, also you can refer the following links :
Re: Regarding Outbound Delivery for STPO
Re: Regarding Delivery for Stock Transport Purchase Orders
Re: error while cross company sock transfer -
Error while creating sales order for material with another DIVISION
Hello Friends,
I have a problem with my sales order creation.
I have defined a new sales area 0010 / 10 / 01. I have the sales order type assigned to this sales area. (in VOV8 for the sales order type, in the 'General Control' the 'item division' is flagged.
Now, I have created the sold to party XYZ with all the partner functions defaulted same as the sold to party for the sales area 0010 / 10 / 01.
NOW, I have the material ABC with the DIVISION 10 in the basic data. I have extended the material to my sales org & dist. channel & plant.
Now, while creating the sales order for my sales area 0010 / 10 / 01 , I enter the sold to party XYZ - it is OK. But when I enter the material ABC, I get the error - "SHIP TO PARTY IS NOT DEFINED FOR SALES AREA 0010 / 10 / 10"
Please help to resolve the issue.
Edited by: Vivek on Aug 13, 2009 9:04 AMHi
Common division for Material Master data will not work
Because in the material master Division is a field not an organizational unit
Means when you create MMR you will give sales org, DC, Plant as organizational units and then enter but not division
Division is a field maintained in basic data and sales org data 1
This is the reason in t code you will find in t code VOR2 Common division only customer and conditions but not materials
But in t code VOR1 Common DC ,customer conditions and materials all there are available (you can check these t codes)
Coming to your issue Item div is clecked in your order type
This means the division in MMR has the priority or control for that order type
Your header division is 01 ( taken from customers sales area) and item division is 10 (taken from MMR as per your post)
So it differs
To process this order with Item div is clecked in your order type you need to extend your Sold to party ABC to the sales area 0010/10/10 (the sales area where the division of the material falls)
or alternatively
There should be a customer say DEF created in sales area 0010/10/10 who will be a ship to party ( your error is also the same)
for your ABC that is sold to party in sales area 0010/10/01 where the order is registered
Hope yopu are getting it
ABC in sales area 0010/10/01 will have or should have ship to paty DEF in sales area 0010/10/10
or
ABC should operate in in sales area 0010/10/10 too
If item division is not ticked then these are not necessary as the header division 01 will be valid for all items and syatem will not look MMR at all for division
Regards
Raja -
Error while creating application user in EBS R12 through sysadmin
Hi
I am using SSO/OID, while creating user it is giving following error in oracle apps R12:-
Unable to call fnd_ldap_wrapper.create_user due to the following reason:-
ORA-20001: Unabled to call fnd_ldap_wrapper.create_user due to the following reason:-
An unexpected error occurred: please contact your system
adminstrator..(USER_NAME=MURTHY4)
Thanks
JILHi Jil,
Pls. complete the following step:-
1) what's your R12 RUP version ?
2) As user 'MURTHY4' do not exist in FND_USERS, please do the following:
Enable Log Debug for E-Business Suite
Connected as System Administrator, modify the following system profiles:
FND: Debug Log Enabled Yes
FND: Debug Log Filename <empty>
FND: Debug Log Level STATEMENT
FND: Debug Log Mode Asynchronous with Cross-Tier Sequencing
FND: Debug Log Module % or fnd%
There is no need to stop and restart E-Business Suite.
All log information will be created in the table FND_LOG_MESSAGES.
Make sure nobody access the system or else it will put redundant entries in fnd_log_messages.
Truncate the table first using command:
truncate table applsys.fnd_log_messages; commit;
then perform the steps as described below
As soon as you finished reproducing the problem, run the following query :
select timestamp,module,message_text from fnd_log_messages order by log_sequence asc;
then save the O/P in an excel spread sheet and upload the RESULTS for review.
Revert the debug settings
Regards,
Naveen
Maybe you are looking for
-
When I tried to login to em console unable to see the soa server up. Help
Please help me to resolve the issue. I am unable to see soa_server in up condition in em console. i followed the below steps. 1. started Admin server through startAdminServer wizard from start--> all programs 2. started Soa_server through c:\oracle\M
-
Premier Elements 10 - I cannot get the Share/Online Feature to work
Brand new install of premier elements 10 on a new PC running Windows 7. Everything was working great until it was time to do something with the movie project. I want to get the movie to YouTube but when I went to Share and then Selected Online - no
-
Hi I know that I am overlooking something incredibly simple, however I am really new to Dreamweaver and can't seem to figure out where I'm going wrong. I basically want to use CSS to make the background of my page grey. The rule I have is quite simpl
-
Problem with Purchase Requisition
Hello, Our people create purchase requisitions with several line items and to simplify this they would need a possibility to hold the purchase req (as it is possible for POs). Is there a way to do this, i.a. hold a 'unfinished' purchase requisition w
-
Solaris10 Installation inside VirtualBox 2.1.0
Hi: I posted this question in the wrong forum ... Environment: Host OS: Windows XP Virtual Box: Ver 2.1.0 Current Status: 1) Solaris Vol1 (CD1) is installed and works fine. Problem: 1) Installing the rest of the vol's after initial installation? 2) H