Error while creating the ASSET using LSMW BAPI method ( BUS1022 )

Hello,
Im creating assets using the below LSMW BAPI method
Business Object      BUS1022
Method                     CREATEINCLVALUES
Message Type         FIXEDASSET_CREATEINCLVALU
Basic Type              FIXEDASSET_CREATEINCLVALU
the following errors were triggered while populating the values to ACQ_VALUE and ORD_DEP value.
Correction to ordinary dep. greater than acc. dep. in area 01
Correction to ordinary dep. greater than acc. dep. in area 30
Correction to ordinary dep. greater than acc. dep. in area 31
Correction to ordinary dep. greater than acc. dep. in area 32
if i pass only ACQ_VALUE, I am able to create the asset with out any issues.
Can you guys plz guide me to fix this issue to create the asset with both ACQ_VALUE and ORD_DEP values??
Cheers,
Sriram.

Hello,
Review AO21.
Regards
Waza

Similar Messages

Error while uploading the data Using LSMW - Idoc method

Hi Experts,
I am working on LSMW using Idoc method. Till 12th step (Display converted data) i wasn't got any problem. For the Idoc method, I have to specify details to Idoc inbound processing from the menu settings.
In that screen I have to specify file port, partner type and partner no. I have created a file port ZFILE. Can u tell me what ahould I pass in that screen? Where should be the file i.e in the application server or presentation server? What should be the directory and function module. Can u provide step by step?
After that I have to specify partn.type. What should I select for that?
After that I have to specify partner no. Whether it is inbound or outbound?
I got No data found for the following detials.
port - ZFILE
in the inbound file tab, e:\ as physical directory; EDI_PATH_CREATE_USERNAME as function module.
Partner type - US
Parnter no. - LSMW with the inbound parameters message type - MATMAS and Process code - MATM.
Please tell me how can I upload properly? Please don't ignore as i am asking same question again becasue I have gone through related threads also. But i didn't find the exact requirement.
proper documentation will be rewarded.
Thanks in Advance.
James.

Hello,
I could identify the error. It was due to incorrect UOM. Problem resolved.
Thanks,
Madhura

Error while creating Legacy Asset using AS91

Error is as follows
E698 SYST: Abnormal termination (ANLB-LGJAN 1 not equal to ANLC-GJAHR
In 2008 during implementation, there was a mis match between FI & AA.
In AA Takeover values were not updated but GL entry was made. Now since depreciation is run, it is not allowing to update takeover values in AS92.
Now the i have planned to follow this procedure
Firstly Reset Depreciation
Then to create new Assets in AA copying previous assets without Takeover values using AS 91 & update those takeover values in new assets.
Then FI & AA values would match & then i can run depreciation.
But in 2nd step i am stucked, as when i try creating new asset using AS91 it is giving above error.
What should be date of legacy data transfer in spro? i have maintained 30.09.2008
In OAAQ i have maintained closed FY =2007
In OB52 i have Opened both 2008 & 2009 posting periods.
What more has to be done?

Hi Paul
I have taken a production copy in different client & have done all these with the client's permission.
Following are the reasons with example
suppose these are 4 assets at the time of implementation
1 Asset A       Acquisition value 100000/-      Accumulated Depreciation       20000/-
2 Asset B       Acquisition value 200000/-      Accumulated Depreciation       30000/-
3 Asset C       Acquisition value 300000/-      Accumulated Depreciation       40000/-
4 Asset D       Acquisition value 400000/-      Accumulated Depreciation       50000/-
In implementation following happened by mistakenly
Asset A & B were properly created using AS91 & in GL also entry properly made using OASV
but for Asset C, entry was made using OASV but in AA Tcode AS91 Asset Master was created but Takeover values were not updated.
for Asset D entry was made in OASV but in AA Asset number was not at all created.
so when you see asset master C in AW01N acquisition value is blank & planned depreciation is also missing.
i think individually all data was not cross tallyied.
So the Balance sheet is tallyied with entry in FI
but
in AA there are 100 assets without takeover values & 300 assets for which Asset Masters are not at all created in AA.
& depreciation for 2008 has been run on other assets excluding these 400 assets.
So now AA closing cannot be done as the FI & AA balances are not reconciled.
& now we have to update takeover values creating new asset masters using AS91 but system is not allowing us.
Could you suggest some solution for these problems
Thanks in Advance

Error while creating fixed asset using BAPI BAPI_FIXEDASSET_OVRTAKE_CREATE

Hi
I am getting an error stating "O DEP START field is not ready for input, while trying to create asset using the BAPI BAPI_FIXEDASSET_OVRTAKE_CREATE.How to make the field input enabled in BAPI .Kindly suggest.
Thanks

Hello,
Review AO21.
Regards
Waza

Error while creating the session in LSMW

Hi,
I am trying to load the file in LSMW.
while i am creating session for all the red records, I am getting the error message "An error occurred when deleting sessions" . If i convert only <1000 records, the session is creating fine.
Please provide the solution.
Thanks,
vishnu

Hi madhu,
The problem resolved. The issue is because of the special char's in the load file.
Thank a lot Mudhu..
-Vishnu

Delivery Date error while creating/uploading POs using LSMW

Hi,
I am facing problem in creating POs using LSMW. I am using direct input method with standard object 0085 for PO upload. But I am facing problem because of delivery date in the PO. There are basically two errors that I am getting:
1) When the delivery date format is DDMMYYYY in the fileto be uploaded, the error that i get is "Please enter a valid delivery date"(Message No..ME 077)
2) When the delivery date format is YYYYMMDD in the file to be uploaded, the error that i get isFor the K4 fiscal year variant, no period is defined for . .(Mesage no. F5 275)
Please let me know how to rectify these errors.
Thanks in advance.....

Hi,
You need to rectify the issue by applying attached corrections in SAP Note 1094336 - Error message F5 275 if requirement date is deleted.
Summary
Symptom
The "Requirement date" field (EBAN-BADAT) was set to changeable in the the field selection. If the "Requirement date" field is deleted for a purchase requisition item, the system issues error message F5275 "For the xxx fiscal year variant, no period is defined for 00.00.0000".
You can leave the process only with /n.
Other terms
BADAT, requirement date, F5 275, EF5275, E F5 275
Reason and Prerequisites
Usability
Solution
Implement the program corrections.
Regards,
Sandesh Sawant

Paraller Query Server Error while creating the database using DBCA on UNIX

Hi All,
I am try to create the database on UNIX PLATFORM database 11g R1.
At the end of database creation using DBCA i got the errors:
ORA-12801:error signaled in parallel query server P077
ORA-00018: maximun number of sessions exceeded
ORA-06512:at"SYS.UTL_RECOMP",line 760
ORA-06512:at"SYS.UTL_RECOMP",line 773
ORA-06512:at line 1
Please suggest what can i do to remove this issue.
Regards
Girish Sharma

user12104101 wrote:
Hi All,
I am try to create the database on UNIX PLATFORM database 11g R1.
At the end of database creation using DBCA i got the errors:
ORA-12801:error signaled in parallel query server P077
ORA-00018: maximun number of sessions exceeded
ORA-06512:at"SYS.UTL_RECOMP",line 760
ORA-06512:at"SYS.UTL_RECOMP",line 773
ORA-06512:at line 1
Please suggest what can i do to remove this issue.
Regards
Girish SharmaIncrease value of SESSIONS(also processes) parameter as
sqlplus "/as sysdba"
show parameter sessions
alter system set sessions =<new big value> scope=spfile;
shutdown immediate;
startup;

Error while opening the application using semantic object method

Hello ,
We just got all the Wave 3 apps and SP08 versions on our Fiori server. While setting up the transnational applications , I am not able to open any app using semantic objects. if i put direct URL I can open the app.
Error screen shots are :
The Launchpad designer settings for create sales order app are :
Please suggest the solution.
The error is same for all the applications.
Regards,
Sheetal
Tags edited by: Michael Appleby

Hello Masa,
Checked this note. Not able to resolve the issue. Can you please explain, for the application to work with Navigation and semantic object what all roles do we need to assign to the User?
For create Sales Order :
Component
Technical Name
Business Role
SAP_SD_BCR_FIELDSALESREP_X1
Business Catalog
SAP_SD_BC_FIELDSALESREP_X1
Business Catalog Group
SAP_SD_BCG_FIELDSALESREP_X1
Technical Role
SAP_SD_BCR_FIELDSALESREP_X1
Technical Catalog
SAP_SD_TC_T_X1
LPD_CUST Role
UIX01SD
LPD_CUST Instance
TRANSACTIONAL
OData Service (Version Number)
Back-End Server: Delivered Authorization Role (PFCG Role)
Front-End Server: Authorization Role
SRA017_SALESORDER_CREATE_SRV
SRA017:SAP_SD_SO_CRE_APP
SAP_SD_BCR_FIELDSALESREP_X1
My user id is assigned to three Roles :
SAP_SD_BCR_FIELDSALESREP_X1
SAP_SD_BCR_FIELDSALESREP_X1
SRA017:SAP_SD_SO_CRE_APP
Do I need to assign any other roles than these three?
Regards,
Sheetal

Enter G/L account error while uploading open contracts using lsmw

Hi Experts,
I have a flat file for Open Contracts.While trying to upload using LSMW -BAPI method(BUS2014), it is throwing error as 'Enter G/L account' though G/L is present in the flat file.I have done with the mapping in the 5th step.
Checked all the configuration settings of G/L.everything is fine. Not getting where is it going wrong.
please help me out.

I've tried regarding Helmut's advise and it works.
10 points (if i was a thread owner)

Error while creating the DWH tables using DAC

Hi,
I am getting error while creating the DWH tables using DAC. I have created a ODBC DSN using merant driver with DAC repository DB credentials and the test connection is successful. And while creating the tables i gave the olap dw credentials and the DSN name which i created earlier. But it throws the error as below:
Please find the below mentioned error message
=====================================
STD OUTPUT
=====================================
CREATING SIEBEL DATABASE OBJECTS
F:\DAC\bifoundation\dac\UTILITIES\BIN\DDLIMP /I N /s N /u infdomain /p ******* /c DB_DAC /G "SSE_ROLE" /f F:\DAC\bifoundation\dac/conf/sqlgen/ctl-file/oracle_bi_dw.ctl /b "" /K "" /X "" /W N
Error while importing Siebel database schema.
=====================================
ERROR OUTPUT
=====================================
Siebel Enterprise Applications ODBC DDL Import Utility, Version 7.7 [18030] ENU
Copyright (c) 2001 Siebel Systems, Inc. All rights reserved.
This software is the property of Siebel Systems, Inc., 2207 Bridgepointe Parkway,
San Mateo, CA 94404.
User agrees that any use of this software is governed by: (1) the applicable
user limitations and other terms and conditions of the license agreement which
has been entered into with Siebel Systems or its authorized distributors; and
(2) the proprietary and restricted rights notices included in this software.
WARNING: THIS COMPUTER PROGRAM IS PROTECTED BY U.S. AND INTERNATIONAL LAW.
UNAUTHORIZED REPRODUCTION, DISTRIBUTION OR USE OF THIS PROGRAM, OR ANY PORTION
OF IT, MAY RESULT IN SEVERE CIVIL AND CRIMINAL PENALTIES, AND WILL BE
PROSECUTED TO THE MAXIMUM EXTENT POSSIBLE UNDER THE LAW.
If you have received this software in error, please notify Siebel Systems
immediately at (650) 295-5000.
F:\DAC\bifoundation\dac\UTILITIES\BIN\DDLIMP /I N /s N /u infdomain /p ***** /c DB_DAC /G SSE_ROLE /f F:\DAC\bifoundation\dac/conf/sqlgen/ctl-file/oracle_bi_dw.ctl /b /K /X /W N
Connecting to the database...
28000: [DataDirect][ODBC Oracle driver][Oracle]ORA-01017: invalid username/password; logon denied
Unable to connect to the database...
any help is appreciated.
Thanks,
RM

The fact that you are getting an "ORA-01017: invalid username/password; logon denied" message indicates that you are at least talking to the database.
The log shows that username "infdomain" is being used. Can you double check the username and password you have in DAC in a SQL*Plus/SQL Developer session?
Please mark if useful/helpful,
Andy.

Error while creating the structure

hello friends,
i have two doubts
1)
i am getting the error while creating the structure in se11.
well i am creating the structure in the following way
in component i am giving the values as bom and in component type i am giving the value as meins.
i am getting the status warning message as the below
'field name does not agree with the proposed name base_bom for bapi table'
2)
and more over can we create the structure as the follwing in se11.
component = f1 and
component type = tablename-fieldname
when i am doing in the second way i am getting the error as the following table is not active though the table is active

hi guru,
just component name as --- your field name.
where as component type as give just data element k.
no need to give tablenme-fieldname k.
component component type .
f1 matnr----
data element
thanks anji.
Moderator message: please do not use SMS speak, what does that "k" mean, short for "OK"? please get your act together, these are professional forums.
Edited by: Thomas Zloch on Nov 15, 2010 9:10 AM

Serial number error while creating the production order

Hello frds,
I am getting the following error while creating the production order.
"Item 000000 requires exactly 100 serial numbers for the asset".
If i give 100 serial numbers in the order, the error is solved. But i do not want to assign 100 serial numbers, i want to assign only 2 numbers.
I have tried using the new serial number profile also, but it is giving same error.
Kindly guide.
Regards,
Narendra Bora

Dear Narendra
Select the serial number profile and go to serialization procedure and set the ser. usage status 02 - Optional as below.
Procd Procedure description Ser.Usage
PPRL PP order release 02
since the serail number creation is optional for order relase this will allow you to relase with out error and with serail number assigned in partial.
Regards
Soundar

Error while creating the HTTP client with destination GB_DPSRetrieve

Hi All,
It is an interface R/3 -->XI --> HTTP ( proxy to HTTP ).
Please find the error log below and throw some light why the HTTP adapter is getting error -
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SOAP:Header>
- <SAP:Main xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" versionMajor="003" versionMinor="000" SOAP:mustUnderstand="1" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7">
<SAP:MessageClass>SystemError</SAP:MessageClass>
<SAP:ProcessingMode>synchronous</SAP:ProcessingMode>
<SAP:MessageId>DC98499F-7E42-74F1-A41F-0017A4107EE6</SAP:MessageId>
<SAP:RefToMessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:RefToMessageId>
<SAP:TimeSent>2007-11-21T15:51:30Z</SAP:TimeSent>
- <SAP:Sender>
<SAP:Party agency="http://sap.com/xi/XI" scheme="XIParty">GovernmentGateway</SAP:Party>
<SAP:Service>GGMailbox</SAP:Service>
<SAP:Interface namespace="http://sap.com/xi/E-FILING_GB/2005">DPSretrieve</SAP:Interface>
</SAP:Sender>
- <SAP:Receiver>
<SAP:Party agency="" scheme="" />
<SAP:Service>SAP_DEV_ERP2005</SAP:Service>
<SAP:Interface namespace="http://sap.com/xi/HR">HR_GB_EFI_DPSretrieve</SAP:Interface>
</SAP:Receiver>
<SAP:Interface namespace="http://sap.com/xi/E-FILING_GB/2005">DPSretrieve</SAP:Interface>
</SAP:Main>
- <SAP:ReliableMessaging xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:QualityOfService>BestEffort</SAP:QualityOfService>
</SAP:ReliableMessaging>
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_CLIENT_DEST</SAP:Code>
<SAP:P1>GB_DPSRetrieve</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while creating the HTTP client with destination GB_DPSRetrieve</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
- <SAP:HopList xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
- <SAP:Hop timeStamp="2007-11-21T15:51:30Z" wasRead="false">
<SAP:Engine type="BS">SAP_DEV_ERP2005</SAP:Engine>
<SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
<SAP:MessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:MessageId>
<SAP:Info>3.0</SAP:Info>
</SAP:Hop>
- <SAP:Hop timeStamp="2007-11-21T15:51:30Z" wasRead="false">
<SAP:Engine type="IS">is.00.lbsth-tb1ci</SAP:Engine>
<SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
<SAP:MessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:MessageId>
<SAP:Info>3.0</SAP:Info>
</SAP:Hop>
- <SAP:Hop timeStamp="2007-11-21T15:51:30Z" wasRead="false">
<SAP:Engine type="IS" />
<SAP:Adapter namespace="http://sap.com/xi/XI/System">HTTP</SAP:Adapter>
<SAP:MessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:MessageId>
<SAP:Info />
</SAP:Hop>
</SAP:HopList>
- <SAP:RunTime xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Date>20071121</SAP:Date>
<SAP:Time>155130</SAP:Time>
<SAP:Host>lbsth-tb1ci</SAP:Host>
<SAP:SystemId>XIS</SAP:SystemId>
<SAP:SystemNr>00</SAP:SystemNr>
<SAP:OS>Windows NT</SAP:OS>
<SAP:DB>ORACLE</SAP:DB>
<SAP:Language />
<SAP:ProcStatus>023</SAP:ProcStatus>
<SAP:AdapterStatus>000</SAP:AdapterStatus>
<SAP:User>PISUPER</SAP:User>
<SAP:TraceLevel>1</SAP:TraceLevel>
<SAP:LogSeqNbr>000</SAP:LogSeqNbr>
<SAP:RetryLogSeqNbr>000</SAP:RetryLogSeqNbr>
<SAP:PipelineIdInternal>SAP_CENTRAL</SAP:PipelineIdInternal>
<SAP:PipelineIdExternal>CENTRAL</SAP:PipelineIdExternal>
<SAP:PipelineElementId>60C3C53B4BB7B62DE10000000A1148F5</SAP:PipelineElementId>
<SAP:PipelineService>PLSRV_CALL_ADAPTER</SAP:PipelineService>
<SAP:QIdInternal />
<SAP:CommitActor>X</SAP:CommitActor>
<SAP:SplitNumber>0</SAP:SplitNumber>
<SAP:NumberOfRetries>0</SAP:NumberOfRetries>
<SAP:NumberOfManualRetries>0</SAP:NumberOfManualRetries>
<SAP:TypeOfEngine client="200">CENTRAL</SAP:TypeOfEngine>
<SAP:PlsrvExceptionCode />
<SAP:EOReferenceRuntime type="TID" />
<SAP:EOReferenceInbound type="TID" />
<SAP:EOReferenceOutbound type="TID" />
<SAP:MessageSizePayload>0</SAP:MessageSizePayload>
<SAP:MessageSizeTotal>2918</SAP:MessageSizeTotal>
<SAP:PayloadSizeRequest>0</SAP:PayloadSizeRequest>
<SAP:PayloadSizeRequestMap>0</SAP:PayloadSizeRequestMap>
<SAP:PayloadSizeResponse>0</SAP:PayloadSizeResponse>
<SAP:PayloadSizeResponseMap>0</SAP:PayloadSizeResponseMap>
<SAP:Reorganization>INI</SAP:Reorganization>
<SAP:AdapterInbound>PLAINHTTP</SAP:AdapterInbound>
<SAP:AdapterOutbound>IENGINE</SAP:AdapterOutbound>
<SAP:InterfaceAction>INIT</SAP:InterfaceAction>
<SAP:RandomNumber>15</SAP:RandomNumber>
<SAP:AckStatus>000</SAP:AckStatus>
<SAP:SkipReceiverDetermination />
<SAP:Receiver_Agreement_GUID>24422A5646443F8E9D975D57A3EE8162</SAP:Receiver_Agreement_GUID>
</SAP:RunTime>
- <SAP:PerformanceHeader xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SAP:RunTimeItem>
<SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.5</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_MAPPING_REQUEST</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_MAPPING_REQUEST</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_OUTBOUND_BINDING</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_OUTBOUND_BINDING</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_CALL_ADAPTER</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.656</SAP:Timestamp>
</SAP:RunTimeItem>
</SAP:PerformanceHeader>
- <SAP:Diagnostic xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:TraceLevel>Information</SAP:TraceLevel>
<SAP:Logging>Off</SAP:Logging>
</SAP:Diagnostic>
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="T">SystemError message generated. Guid: DC98499F7E4274F1A41F0017A4107EE6</Trace>
<Trace level="1" type="T">Error during execution of message : DC98499CA1EABEF1B4DD00110A63BF06</Trace>
<Trace level="1" type="T">ApplicationMessage was (=RefToMsgId): DC98499CA1EABEF1B4DD00110A63BF06</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
</SAP:Trace>
</SOAP:Header>
- <SOAP:Body>
<SAP:Manifest xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-manifest-5CABE13F5C59AB7FE10000000A1551F7" />
</SOAP:Body>
</SOAP:Envelope>
Regards,
Kishore

Hi,
In the HTTP Receiver what is the Addressing Type used ? (URL Address or HTTP Destination).
If its URL Addressing Type, check if right Authentication Type is used with valid values and for HTTP Addressing Type check this HTTP Client Create Error, it could be helpful.
Also check if the Target system can be reached from the XI server to validate the configuration parameters.
Regards,
S.Santhosh Kumar

Error while creating resource group using non-globalzones.

Dear all,
Hi techs please guide me how to create failover resource group in nongloablzones.
I'm getting error while creating resource group using non-globalzones.
My setup:
I have two node cluster running sun cluster 3.2 configured and running properly.
node1: sun5
nide2: sun8
I have create non-globalzone "zone1" in node:sun5
I have create non-globalzone "zone2" in node:sun8
node:sun5# clrg create -n sun5:zone1,sun8:zone2 zonerg
*(C160082) WARNING: one or more zones in the node list have never been fully booted in the cluster mode,verify that correct zone name was entered.*
kindly guide me how to create Apache resource group using non-glabalzones, i'm new to sun cluster 3.2. please guide me step by step information.
Thanks in advance,
veera
Edited by: veeraa on Dec 19, 2008 1:54 AM

Hi Veera,
Actually you are getting a warning message where one of two things could have happened. Either you specified an incorrect zone name or one of the zones has not been fully booted. It's likely that you haven't booted the zones, so please follow this:
zoneadm list -iv
If zone1 or zone2 are not running then boot and configure them
zoneadm -z <zone> boot
zlogin -C <zone>
After that you can continue to follow the step by step instructions at
http://docs.sun.com/app/docs/doc/819-2975/chddadaa?a=view
These may also help
http://blogs.sun.com/Jacky/entry/a_simple_expample_about_how
http://blogs.sun.com/SC/en_US/entry/sun_cluster_and_solaris_zones
Regards
Neil

WWC-00000 error while creating the user

Any one can help me on the WWC-00000 error while creating the
user from the Admin tab of Oralce Portal. In fact I can't use
the Login server administration. same problem exists.
I granted DBA privileges to the PORTAL30, just to verify and NO
use.
I am using the latest version of Portal S/W on iAS9i 1.0.2.2.1
- Suneel

Hi Suresh,
This error trace is not sufficient to understand the issue and at what step you got this error.
First tell me, did you got the User Admin Tab in your portal access. if yes.. did you got the next step...which is Identity Management. Please elaborate when did you got this error (i mean at what step) after that only we can give it a try.
Thanks,
Vinod

Error while creating the ASSET using LSMW BAPI method ( BUS1022 )

Similar Messages

Maybe you are looking for