Error while creating the delivery for STO
Hi,
While creating the delivery, an error is produced when i saw the log . It was as follows
"An Item with no delivery quantity is not permitted. Item will be deleted"
Its related to STO,. if STO contains around 100 items and error is for any single item system is not able to create the delivery for whole PO.
Please guide as its an vey urgent issue will reward with suitable points.
Regards,
Vikram
Hi
while creating delivery make that particular material's delivery quantity as 0. and do not enter any picking quantity.
that material will not be consider while making delivery.
Regards,
vijay
Similar Messages
-
Getting the following error while creating the model for webdynpro app.
Plugin Name: Web Dynpro Model Editor Services
Plugin ID : com.sap.ide.webdynpro.service.modeleditor
Class :ap.ide.webdynpro.modeleditor.wizards.model. creation.ModelDialog
Method : nextPressed
Exception : org.eclipse.swt.SWTException: Failed to execute runnable (java.lang.NoClassDefFoundError)
This is the error i am getting while creating the model for the webdynpro application. Can some one help ?
Thanks & Regards
Lalithhi
This error occurs mainly due to the reason that particular plugin is not there in the NWDS.
So please try to reinstall the NWDS or try tracing out whether that particular plugin is there or not.
Thank,
kris -
Error while creating the delivery in ME2O
Hi Gurus,
when the shipping depeartment is trying to create the delivery in ME2o to send the components for subcontractor, we are gettign the error message
Essential transfer parameters are missing in record: 000001
Please heklp on this one?
and as an ibservation i do see that this vendor is not setup as customer in vendor master in the purchasing data view of the vendor master. Is that the problem?
thanks
Anusha
Edited by: anusha vemulapati on Oct 21, 2009 6:31 PMYes, it might be one reason. It is mentioned in the error message (VL561).
Please create the ship-to party, extend it to the plant's sales area and assign it to the vendor master. /plant sales area is in V_001W_IV/
Please try it and if still you get the errors come back. (Please read the error message and check all the thing described there)
Regards,
Csaba -
Error occuring while creating a Delivery for Stock transport order
Hi,
I am getting error while creating the delivery for thr stock transport order.The error message is given below.
Error Log for coll. run 0001248218
4 6000038321 000010 Only 0 ST of material F784100 available
4 6000038321 000010 An item with no delivery quantity is not permitted. Item will be deleted.
4 6000038321 000020 Only 0 ST of material F784100 available
4 6000038321 000020 An item with no delivery quantity is not permitted. Item will be deleted.
4 6000038321 000030 Only 0 ST of material F784100 available
4 6000038321 000030 An item with no delivery quantity is not permitted. Item will be deleted.
The stocks are present in the plant.
Can anyone help me to solve this issue?
Thanks
SrinivasanHi,
Check in
SPRO--IMG-MM-IM and PI---stock determinationassign stock determination in applications---Inventory management
Check for 641 or 647,there is a SD rule assigned.
Regards,
Deepak. -
Error while creating inbound delivery
Hi All,
I get an error while creating inbound delivery from ASN
"Error during conversion of unit of measure: UoM is missing -> ST BOR131
Please help solve this issue.
Thanks in advance
Regards,
Thiruhi,
please maintain the uom for tour material.
or
reffer this link
Alternate Unit of Measure Conversion Rule Error
/thread/2000551 [original link is broken]
Thanking you. -
Getting error while creating the variable of Schema Element type
Hi everybody,
For creating a variable of schema element type I am doing the following steps...
Select 'Variables' after right clicking on bpel process. IN this window, go to 'Create VAriable' then select 'Element' type. Now in Type Choose, I expanded the my imported schema files. And selected a element type, then click ok to create this variable... I am getting the message...
IN ORDER TO SAVE IMPORTED WSDL/SCHEMA FILES, YOU MUST HAVE A PARTNER LINK LOCATED UNDER THE CURRENT PROJECT DIRECTORY.
What is mean by that.
I have imported the schema files in project. AFter that I have imported them into the WSDL also. Now why I am getting error while creating the variable. However I can create variable directly in .BPEL file then everything is fine. And it is working also. But what is mean with the above error? Why I am not able to create variable through GUI?
Thanks.Hi,
I have this same problem this morning, and I was going crazy, until I found this webpage on the internet:
[http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process|http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process]
The idea is that the jdeveloper is not very good working with directories with spaces on the directory name. If you move all your work to a directory without spaces, it will work smoothly. At least, it had worked for me.
Regards,
Nacho -
Error while creating a task for creating an generic task /app/dac/CustomSQ
Hi ,
I have created a sql file in DAC server /app/dac/CustomSQLs/ ,just to fire an update sql in database
In DAC task tab i have created a task with the following:
Command for incremental load :/app/dac/CustomSQLs/DBNameBeforeLoad.sql
Primary source :flatfileconnection
target source:DBCONNECTION_OLAP
Execution type:SQL FILE
Task phase:GENERAL
I created subject area and assembled ,then created a Execution plan.
When i try to execute this EP ,it shows the following error in DAC log:
ANOMALY INFO::: Error while creating a task for creating an generic task /app/dac/CustomSQLs/DBNameBeforeLoad.sql
MESSAGE:::/app/dac/CustomSQLs/DBNameBeforeLoad.sql - invalide template name!
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.TaskInitializationException
com.siebel.analytics.etl.etltask.SQLFileTask.doInit(SQLFileTask.java:69)
com.siebel.analytics.etl.etltask.GenericTaskImpl.init(GenericTaskImpl.java:194)
Does my above configuration is correct ..?verify the following settings:
1. mapping of ECC plant and storage location and logical system number with the appropriate availability group code since this links the stock types in EWM to ECC org elements (SPRO -> EWM -> Interfaces -> ERP Integration -> Goods movement)
2. ensure the availability group configuration is correct (SPRO -> EWM -> GR Process -> Configure availability group for putaway) - check all applicable nodes in this configuration since the availability group code is assigned in the pertinent storage types -
Error while creating the HTTP client with destination GB_DPSRetrieve
Hi All,
It is an interface R/3 -->XI --> HTTP ( proxy to HTTP ).
Please find the error log below and throw some light why the HTTP adapter is getting error -
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SOAP:Header>
- <SAP:Main xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" versionMajor="003" versionMinor="000" SOAP:mustUnderstand="1" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7">
<SAP:MessageClass>SystemError</SAP:MessageClass>
<SAP:ProcessingMode>synchronous</SAP:ProcessingMode>
<SAP:MessageId>DC98499F-7E42-74F1-A41F-0017A4107EE6</SAP:MessageId>
<SAP:RefToMessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:RefToMessageId>
<SAP:TimeSent>2007-11-21T15:51:30Z</SAP:TimeSent>
- <SAP:Sender>
<SAP:Party agency="http://sap.com/xi/XI" scheme="XIParty">GovernmentGateway</SAP:Party>
<SAP:Service>GGMailbox</SAP:Service>
<SAP:Interface namespace="http://sap.com/xi/E-FILING_GB/2005">DPSretrieve</SAP:Interface>
</SAP:Sender>
- <SAP:Receiver>
<SAP:Party agency="" scheme="" />
<SAP:Service>SAP_DEV_ERP2005</SAP:Service>
<SAP:Interface namespace="http://sap.com/xi/HR">HR_GB_EFI_DPSretrieve</SAP:Interface>
</SAP:Receiver>
<SAP:Interface namespace="http://sap.com/xi/E-FILING_GB/2005">DPSretrieve</SAP:Interface>
</SAP:Main>
- <SAP:ReliableMessaging xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:QualityOfService>BestEffort</SAP:QualityOfService>
</SAP:ReliableMessaging>
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_CLIENT_DEST</SAP:Code>
<SAP:P1>GB_DPSRetrieve</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while creating the HTTP client with destination GB_DPSRetrieve</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
- <SAP:HopList xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
- <SAP:Hop timeStamp="2007-11-21T15:51:30Z" wasRead="false">
<SAP:Engine type="BS">SAP_DEV_ERP2005</SAP:Engine>
<SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
<SAP:MessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:MessageId>
<SAP:Info>3.0</SAP:Info>
</SAP:Hop>
- <SAP:Hop timeStamp="2007-11-21T15:51:30Z" wasRead="false">
<SAP:Engine type="IS">is.00.lbsth-tb1ci</SAP:Engine>
<SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
<SAP:MessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:MessageId>
<SAP:Info>3.0</SAP:Info>
</SAP:Hop>
- <SAP:Hop timeStamp="2007-11-21T15:51:30Z" wasRead="false">
<SAP:Engine type="IS" />
<SAP:Adapter namespace="http://sap.com/xi/XI/System">HTTP</SAP:Adapter>
<SAP:MessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:MessageId>
<SAP:Info />
</SAP:Hop>
</SAP:HopList>
- <SAP:RunTime xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Date>20071121</SAP:Date>
<SAP:Time>155130</SAP:Time>
<SAP:Host>lbsth-tb1ci</SAP:Host>
<SAP:SystemId>XIS</SAP:SystemId>
<SAP:SystemNr>00</SAP:SystemNr>
<SAP:OS>Windows NT</SAP:OS>
<SAP:DB>ORACLE</SAP:DB>
<SAP:Language />
<SAP:ProcStatus>023</SAP:ProcStatus>
<SAP:AdapterStatus>000</SAP:AdapterStatus>
<SAP:User>PISUPER</SAP:User>
<SAP:TraceLevel>1</SAP:TraceLevel>
<SAP:LogSeqNbr>000</SAP:LogSeqNbr>
<SAP:RetryLogSeqNbr>000</SAP:RetryLogSeqNbr>
<SAP:PipelineIdInternal>SAP_CENTRAL</SAP:PipelineIdInternal>
<SAP:PipelineIdExternal>CENTRAL</SAP:PipelineIdExternal>
<SAP:PipelineElementId>60C3C53B4BB7B62DE10000000A1148F5</SAP:PipelineElementId>
<SAP:PipelineService>PLSRV_CALL_ADAPTER</SAP:PipelineService>
<SAP:QIdInternal />
<SAP:CommitActor>X</SAP:CommitActor>
<SAP:SplitNumber>0</SAP:SplitNumber>
<SAP:NumberOfRetries>0</SAP:NumberOfRetries>
<SAP:NumberOfManualRetries>0</SAP:NumberOfManualRetries>
<SAP:TypeOfEngine client="200">CENTRAL</SAP:TypeOfEngine>
<SAP:PlsrvExceptionCode />
<SAP:EOReferenceRuntime type="TID" />
<SAP:EOReferenceInbound type="TID" />
<SAP:EOReferenceOutbound type="TID" />
<SAP:MessageSizePayload>0</SAP:MessageSizePayload>
<SAP:MessageSizeTotal>2918</SAP:MessageSizeTotal>
<SAP:PayloadSizeRequest>0</SAP:PayloadSizeRequest>
<SAP:PayloadSizeRequestMap>0</SAP:PayloadSizeRequestMap>
<SAP:PayloadSizeResponse>0</SAP:PayloadSizeResponse>
<SAP:PayloadSizeResponseMap>0</SAP:PayloadSizeResponseMap>
<SAP:Reorganization>INI</SAP:Reorganization>
<SAP:AdapterInbound>PLAINHTTP</SAP:AdapterInbound>
<SAP:AdapterOutbound>IENGINE</SAP:AdapterOutbound>
<SAP:InterfaceAction>INIT</SAP:InterfaceAction>
<SAP:RandomNumber>15</SAP:RandomNumber>
<SAP:AckStatus>000</SAP:AckStatus>
<SAP:SkipReceiverDetermination />
<SAP:Receiver_Agreement_GUID>24422A5646443F8E9D975D57A3EE8162</SAP:Receiver_Agreement_GUID>
</SAP:RunTime>
- <SAP:PerformanceHeader xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SAP:RunTimeItem>
<SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.5</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_MAPPING_REQUEST</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_MAPPING_REQUEST</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_OUTBOUND_BINDING</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_OUTBOUND_BINDING</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_CALL_ADAPTER</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.656</SAP:Timestamp>
</SAP:RunTimeItem>
</SAP:PerformanceHeader>
- <SAP:Diagnostic xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:TraceLevel>Information</SAP:TraceLevel>
<SAP:Logging>Off</SAP:Logging>
</SAP:Diagnostic>
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="T">SystemError message generated. Guid: DC98499F7E4274F1A41F0017A4107EE6</Trace>
<Trace level="1" type="T">Error during execution of message : DC98499CA1EABEF1B4DD00110A63BF06</Trace>
<Trace level="1" type="T">ApplicationMessage was (=RefToMsgId): DC98499CA1EABEF1B4DD00110A63BF06</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- <!-- ************************************
-->
</SAP:Trace>
</SOAP:Header>
- <SOAP:Body>
<SAP:Manifest xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-manifest-5CABE13F5C59AB7FE10000000A1551F7" />
</SOAP:Body>
</SOAP:Envelope>
Regards,
KishoreHi,
In the HTTP Receiver what is the Addressing Type used ? (URL Address or HTTP Destination).
If its URL Addressing Type, check if right Authentication Type is used with valid values and for HTTP Addressing Type check this HTTP Client Create Error, it could be helpful.
Also check if the Target system can be reached from the XI server to validate the configuration parameters.
Regards,
S.Santhosh Kumar -
Error while creating the structure
hello friends,
i have two doubts
1)
i am getting the error while creating the structure in se11.
well i am creating the structure in the following way
in component i am giving the values as bom and in component type i am giving the value as meins.
i am getting the status warning message as the below
'field name does not agree with the proposed name base_bom for bapi table'
2)
and more over can we create the structure as the follwing in se11.
component = f1 and
component type = tablename-fieldname
when i am doing in the second way i am getting the error as the following table is not active though the table is activehi guru,
just component name as --- your field name.
where as component type as give just data element k.
no need to give tablenme-fieldname k.
component component type .
f1 matnr----
data element
thanks anji.
Moderator message: please do not use SMS speak, what does that "k" mean, short for "OK"? please get your act together, these are professional forums.
Edited by: Thomas Zloch on Nov 15, 2010 9:10 AM -
Error while creating the 'LOV' type parameter in Siebel 8.1.1.5
Hi,
One of my Customer is facing the below error while creatting the parameter of type 'LOV' in Parameter applet in Siebel 8.1.1.5
Runtime Error!
Program: C:\Program Files\Internet Explorer\iexplorer.exe
This application has requested the Runtime to terminate it in an usual way. Please contact the application’s support team for more information
Could some please let me know what would be the reason for this issue?
Thanks in advance for your help.
Thanks,
RaviPlease close this thread...it appears that the error occurs when the report involves a big set of records. I tried trying to filter only one record and was able to produce the pdf
-
Getting error while creating the Shopping cart.
Hi ,
I am getting error while creating the Shopping cart.
a.Error in account assignment for item 1 (Item Testing SC )
b.Duplicates of Cost Centre T10063 are defined in SRM (Item Testing SC )
Kindly provide the solutions.
Thanks,
DevTry the following in the ERP backend system:
Standard Hierarchy Inconsistencies
Issue: one Cost Center is repeating in more than one node in Cost Center Standard Hierarchy.
Update from SAP Global support, the following was the email received:
in transaction KSH3 please run both the ambiguity and completeness check(Menu -> Extras -> Check and Help functions).
If you think that your standard hierarchy is inconsistent you can check that as following:
Run transaction Extras -> Hierarchy - Master data -> Test. The result shows you if there are in consistencies. If that is the case run also Extras -> Hierarchy - Master data -> Comparison.
Alternatively, you can run the report 'RKCORRH1' (TN SE38).
Run both the Hierarchy->Master data->test and the
Hierarchy->Master data->comparison.
As stated above inconsistency message showed after Test. Run the comparison and you get a similar message.
Once the above two are run, again when you go to test, the inconsistency disappears. -
Error while creating the product group by MC84
Hello Friends,
I am creating the product group by MC84, and in product group field i have given the product group name i.e P2345, and its description i.e product group for waluj, plant i.e cw01 and Base unit i.e KG.Now when i press enter system is throwing the error"The field is defined as the required field;it doesnot contain an entry."Message no.MG144.And with this error system is placing the cursor on product group field.As i have already given product group name than also system is throwing the error.
Though i know the alternative method to create product group by MMO1 and selecting the material type PROD, then also i want to know why system is throwing the error while creating the product group by MC84.
Please guide.Dear,
This message says that you have not entered a mandatory field.Enter proper values for all mandatory fields and then you will not get this error.
Try to create the product group as material of material type"PROD"
Then you go on adding the memebers in SOP Transaction.
In some of the versions of SAP it is the problem.
I have also faced this problem in some versions.
Regards,
R.Brahmankar -
Serial number error while creating the production order
Hello frds,
I am getting the following error while creating the production order.
"Item 000000 requires exactly 100 serial numbers for the asset".
If i give 100 serial numbers in the order, the error is solved. But i do not want to assign 100 serial numbers, i want to assign only 2 numbers.
I have tried using the new serial number profile also, but it is giving same error.
Kindly guide.
Regards,
Narendra BoraDear Narendra
Select the serial number profile and go to serialization procedure and set the ser. usage status 02 - Optional as below.
Procd Procedure description Ser.Usage
PPRL PP order release 02
since the serail number creation is optional for order relase this will allow you to relase with out error and with serail number assigned in partial.
Regards
Soundar -
Error while creating the HTTP client with destination
Hi ,
I am getting this error while connecting to https location on receiver channel . The below error i am getting in SXMB_moni
Error while creating the HTTP client with destination
The receiver party is doing some security setting on there end and for that purpose we have provided the external IP address to them , after that we are getting the above error.
We have already installed the client certificate on our staging server , and have done the correct setting in SM59 and channel.Check few things..
1) I believe you use specify destination for the addressing type field in the comm channel. If so make sure you entered valid target URL address in the SM59 of type http destination.
2) Check the validitity of the certificate. You can import the certificate both in java and abap stack.
3) Make sure certificate is installed as expected.
4) Send the request and talk to the target system and check what error information they get in their log related to ssl. -
Automatic Picking giving error while saving the Delivery
Hi
We have done the configuration for doing automatic picking while saving the delivery.
Steps done are
1. TCode V/38
2. TCode OVLT where we have changed the Time value form 3 to 4 for Send Immediate
3. TCode VP01SHP where all shipping points are maintained.
we are getting the following error while saving the delivery.Execute ST22 and go through the explanation given under the tab "Error analysis" and "How to correct the error". Ask your ABAP team to look into this if you are not able to find out the root cause of the issue.
G. Lakshmipathi
Maybe you are looking for
-
Xdock Optical out to MD in?
Hi there, have just become the proud owner of an Xdock transmitter & receiver pair. Unfortunately, my pride is draining away fast! I bought this to connect to a Sony micro system that only has an MD (optical) in. Having connected it up, I'm getting n
-
Hi, I am using GUI_UPLOAD to upload the file from presentation server to my internal table. My problem is that the one of the records of testfile is 3000 in length. The internal table is not showing all the data from the testfile. is there any limi
-
Alternative to Thread.Sleep in catch?
Is there any other way to make the code wait than using Thread.Sleep in catch, because Thread.Sleep disturbs other objects on my form. Here is what I'm trying to do: Try{ //do something catch // wait 10 seconds //retry
-
Java memory management & stack overflow
Hi I am building an application in java. It has to keep track of a lot of objects, typically about 100 000 or so. When putting them in a linked list, I get stack overflow. Is there som way of storing all these objects that wont result in SOF error?
-
Problem for saving files. docx in word 2011 for mac
I'm promemas to save documents in Office 2011. The files have an error in the name or path. Could someone help me? Thank you.