Error while creating the DWH tables using DAC

Hi,
I am getting error while creating the DWH tables using DAC. I have created a ODBC DSN using merant driver with DAC repository DB credentials and the test connection is successful. And while creating the tables i gave the olap dw credentials and the DSN name which i created earlier. But it throws the error as below:
Please find the below mentioned error message
=====================================
STD OUTPUT
=====================================
CREATING SIEBEL DATABASE OBJECTS
F:\DAC\bifoundation\dac\UTILITIES\BIN\DDLIMP /I N /s N /u infdomain /p ******* /c DB_DAC /G "SSE_ROLE" /f F:\DAC\bifoundation\dac/conf/sqlgen/ctl-file/oracle_bi_dw.ctl /b "" /K "" /X "" /W N
Error while importing Siebel database schema.
=====================================
ERROR OUTPUT
=====================================
Siebel Enterprise Applications ODBC DDL Import Utility, Version 7.7 [18030] ENU
Copyright (c) 2001 Siebel Systems, Inc. All rights reserved.
This software is the property of Siebel Systems, Inc., 2207 Bridgepointe Parkway,
San Mateo, CA 94404.
User agrees that any use of this software is governed by: (1) the applicable
user limitations and other terms and conditions of the license agreement which
has been entered into with Siebel Systems or its authorized distributors; and
(2) the proprietary and restricted rights notices included in this software.
WARNING: THIS COMPUTER PROGRAM IS PROTECTED BY U.S. AND INTERNATIONAL LAW.
UNAUTHORIZED REPRODUCTION, DISTRIBUTION OR USE OF THIS PROGRAM, OR ANY PORTION
OF IT, MAY RESULT IN SEVERE CIVIL AND CRIMINAL PENALTIES, AND WILL BE
PROSECUTED TO THE MAXIMUM EXTENT POSSIBLE UNDER THE LAW.
If you have received this software in error, please notify Siebel Systems
immediately at (650) 295-5000.
F:\DAC\bifoundation\dac\UTILITIES\BIN\DDLIMP /I N /s N /u infdomain /p ***** /c DB_DAC /G SSE_ROLE /f F:\DAC\bifoundation\dac/conf/sqlgen/ctl-file/oracle_bi_dw.ctl /b /K /X /W N
Connecting to the database...
28000: [DataDirect][ODBC Oracle driver][Oracle]ORA-01017: invalid username/password; logon denied
Unable to connect to the database...
any help is appreciated.
Thanks,
RM

The fact that you are getting an "ORA-01017: invalid username/password; logon denied" message indicates that you are at least talking to the database.
The log shows that username "infdomain" is being used. Can you double check the username and password you have in DAC in a SQL*Plus/SQL Developer session?
Please mark if useful/helpful,
Andy.

Similar Messages

  • Error while creating Cross-reference table using Xreftool (PIP Ins)

    Error while running xref.sh script unable to create cross reference table.
    **Error: Exception in thread "main" java.lang.NoClassDefFoundError: oracle/tip/xref/tool/AdminTool**
    Could not find xref directory within tip folder (/OracleAS_1/bpel/docs/workflow/oracle/tip)
    searched for similar issue in OTN it says issue fixed by upgrading Oracle AS, we are using 10.1.3.4 MLR#8
    http://kr.forums.oracle.com/forums/thread.jspa?threadID=835446
    steps followed.
    Creating Cross-Reference Tables
    Complete the following procedure to create cross-reference tables.
    To create cross-reference tables
    1 Navigate to the following directory:
    %SOAHOME%/SiebelODOPPIP/scripts/
    2 Open the following file for editing:
    xref.sh
    3 Set the userid and passwd for logging into BPEL console on the appropriate lines.
    4 Set the correct SOA_HOME location on the appropriate line.
    5 Save and close the file.
    6 Make the file executeable:
    chmod +x xref.sh
    dos2unix xref.sh
    7 Change directory (cd) to integration/esb/bin under %SOAHOME%.
    8 Execute ../../../SiebelODOPPIP/scripts/xref.sh.
    I am using SOA suite 10.1.3.3 and getting same error
    Error: Exception in thread "main" java.lang.NoClassDefFoundError: oracle/tip/xref/tool/AdminTool

    Hi Abhijeet,
    please check in transaction FI01, about your data consistencies. You can use this wiki help in terms of Address, it it found any useful facts for you
    Address Checks - Business Address Services (BC-SRV-ADR) - SAP Library

  • Error while creating the sales order using Proxy

    Hi Folks,
    I am trying to create a Sales Order using Proxy via BAPI "BAPI_SALESORDER_CREATEFROMDAT2" :
    and i got this type of standard error message
    <Message>FB call: insufficient parameters</Message>
    few days back only i used the same bapi for creating the Sales Order and did it successfully...using the same parameters
    I don't have any clue about this type error .
    Kindly guide .
    Regards,

    Hi Nikhil,
    How refreshing the cache and restart the server will help ?
    basically i am testing the scenario at R/3 end only by generating XML template in SPROXY.
    My ECC 6.0 is on sp 12....I am not sure is it configuration related error or a bug ? as i have used the same code in ECC 6.0 with sp 09.
    regards,

  • Error while creating data warehouse tables.

    Hi,
    I am getting an error while creating data warehouse tables.
    I am using OBIA 7.9.5.
    The contents of the generate_clt log are as below.
    >>>>>>>>>>>>>>>>>>>>>>>>>>
    Schema will be created from the following containers:
    Oracle 11.5.10
    Universal
    Conflict(s) between containers:
    Table Name : W_BOM_ITEM_FS
    Column Name: INTEGRATION_ID.
    The column properties that are different :[keyTypeCode]
    Success!
    <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
    There are two rows in the DAC repository schema for the column and the table.
    The w_etl_table_col.KEY_TYPE_CD value for DW application is UNKNOWN and for the ORA_11i application it is NULL.
    Could this be the cause of the issue? If yes, why could the values be different and how to resolve this?
    If not, then what could be the problem?
    Any responses will be appreciated.
    Thanks and regards,
    Manoj.

    Strange. The OBIA 7.9.5 Installation and Configuration Guide says the following:
    4.3.4.3 Create ODBC Database Connections
    Note: You must use the Oracle Merant ODBC driver to create the ODBC connections. The Oracle Merant ODBC driver is installed by the Oracle Business Intelligence Applications installer. Therefore, you will need to create the ODBC connections after you have run the Oracle Business Intelligence Applications installer and have installed the DAC Client.
    Several other users are getting the same message creating DW tables.

  • Error while creating the structure

    hello friends,
    i have two doubts
    1)
    i am getting the error while creating the structure in se11.
    well i am creating the structure in the following way
    in component i am giving the values as bom and in component type i am giving the value as meins.
    i am getting the status warning message as the below
    'field name does not agree with the proposed name base_bom for bapi table'
    2)
    and more over can we create the structure as the follwing in se11.
    component = f1 and
    component type =  tablename-fieldname
    when i am doing in the second way i am getting the error as the following table is not active though the table is active

    hi guru,
    just component name as --- your field name.
    where as component type as give just data element k.
    no need to give tablenme-fieldname k.
    component         component type .
    f1                        matnr----
    data element
    thanks anji.
    Moderator message: please do not use SMS speak, what does that "k" mean, short for "OK"? please get your act together, these are professional forums.
    Edited by: Thomas Zloch on Nov 15, 2010 9:10 AM

  • Error while creating the HTTP client with destination GB_DPSRetrieve

    Hi All,
    It is an interface R/3 -->XI --> HTTP ( proxy to HTTP ).
    Please find the error log below and throw some light why the HTTP adapter is getting error -
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SAP="http://sap.com/xi/XI/Message/30">
    - <SOAP:Header>
    - <SAP:Main xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" versionMajor="003" versionMinor="000" SOAP:mustUnderstand="1" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7">
      <SAP:MessageClass>SystemError</SAP:MessageClass>
      <SAP:ProcessingMode>synchronous</SAP:ProcessingMode>
      <SAP:MessageId>DC98499F-7E42-74F1-A41F-0017A4107EE6</SAP:MessageId>
      <SAP:RefToMessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:RefToMessageId>
      <SAP:TimeSent>2007-11-21T15:51:30Z</SAP:TimeSent>
    - <SAP:Sender>
      <SAP:Party agency="http://sap.com/xi/XI" scheme="XIParty">GovernmentGateway</SAP:Party>
      <SAP:Service>GGMailbox</SAP:Service>
      <SAP:Interface namespace="http://sap.com/xi/E-FILING_GB/2005">DPSretrieve</SAP:Interface>
      </SAP:Sender>
    - <SAP:Receiver>
      <SAP:Party agency="" scheme="" />
      <SAP:Service>SAP_DEV_ERP2005</SAP:Service>
      <SAP:Interface namespace="http://sap.com/xi/HR">HR_GB_EFI_DPSretrieve</SAP:Interface>
      </SAP:Receiver>
      <SAP:Interface namespace="http://sap.com/xi/E-FILING_GB/2005">DPSretrieve</SAP:Interface>
      </SAP:Main>
    - <SAP:ReliableMessaging xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:QualityOfService>BestEffort</SAP:QualityOfService>
      </SAP:ReliableMessaging>
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIAdapter</SAP:Category>
      <SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_CLIENT_DEST</SAP:Code>
      <SAP:P1>GB_DPSRetrieve</SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error while creating the HTTP client with destination GB_DPSRetrieve</SAP:Stack>
      <SAP:Retry>N</SAP:Retry>
      </SAP:Error>
    - <SAP:HopList xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
    - <SAP:Hop timeStamp="2007-11-21T15:51:30Z" wasRead="false">
      <SAP:Engine type="BS">SAP_DEV_ERP2005</SAP:Engine>
      <SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
      <SAP:MessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:MessageId>
      <SAP:Info>3.0</SAP:Info>
      </SAP:Hop>
    - <SAP:Hop timeStamp="2007-11-21T15:51:30Z" wasRead="false">
      <SAP:Engine type="IS">is.00.lbsth-tb1ci</SAP:Engine>
      <SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
      <SAP:MessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:MessageId>
      <SAP:Info>3.0</SAP:Info>
      </SAP:Hop>
    - <SAP:Hop timeStamp="2007-11-21T15:51:30Z" wasRead="false">
      <SAP:Engine type="IS" />
      <SAP:Adapter namespace="http://sap.com/xi/XI/System">HTTP</SAP:Adapter>
      <SAP:MessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:MessageId>
      <SAP:Info />
      </SAP:Hop>
      </SAP:HopList>
    - <SAP:RunTime xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
      <SAP:Date>20071121</SAP:Date>
      <SAP:Time>155130</SAP:Time>
      <SAP:Host>lbsth-tb1ci</SAP:Host>
      <SAP:SystemId>XIS</SAP:SystemId>
      <SAP:SystemNr>00</SAP:SystemNr>
      <SAP:OS>Windows NT</SAP:OS>
      <SAP:DB>ORACLE</SAP:DB>
      <SAP:Language />
      <SAP:ProcStatus>023</SAP:ProcStatus>
      <SAP:AdapterStatus>000</SAP:AdapterStatus>
      <SAP:User>PISUPER</SAP:User>
      <SAP:TraceLevel>1</SAP:TraceLevel>
      <SAP:LogSeqNbr>000</SAP:LogSeqNbr>
      <SAP:RetryLogSeqNbr>000</SAP:RetryLogSeqNbr>
      <SAP:PipelineIdInternal>SAP_CENTRAL</SAP:PipelineIdInternal>
      <SAP:PipelineIdExternal>CENTRAL</SAP:PipelineIdExternal>
      <SAP:PipelineElementId>60C3C53B4BB7B62DE10000000A1148F5</SAP:PipelineElementId>
      <SAP:PipelineService>PLSRV_CALL_ADAPTER</SAP:PipelineService>
      <SAP:QIdInternal />
      <SAP:CommitActor>X</SAP:CommitActor>
      <SAP:SplitNumber>0</SAP:SplitNumber>
      <SAP:NumberOfRetries>0</SAP:NumberOfRetries>
      <SAP:NumberOfManualRetries>0</SAP:NumberOfManualRetries>
      <SAP:TypeOfEngine client="200">CENTRAL</SAP:TypeOfEngine>
      <SAP:PlsrvExceptionCode />
      <SAP:EOReferenceRuntime type="TID" />
      <SAP:EOReferenceInbound type="TID" />
      <SAP:EOReferenceOutbound type="TID" />
      <SAP:MessageSizePayload>0</SAP:MessageSizePayload>
      <SAP:MessageSizeTotal>2918</SAP:MessageSizeTotal>
      <SAP:PayloadSizeRequest>0</SAP:PayloadSizeRequest>
      <SAP:PayloadSizeRequestMap>0</SAP:PayloadSizeRequestMap>
      <SAP:PayloadSizeResponse>0</SAP:PayloadSizeResponse>
      <SAP:PayloadSizeResponseMap>0</SAP:PayloadSizeResponseMap>
      <SAP:Reorganization>INI</SAP:Reorganization>
      <SAP:AdapterInbound>PLAINHTTP</SAP:AdapterInbound>
      <SAP:AdapterOutbound>IENGINE</SAP:AdapterOutbound>
      <SAP:InterfaceAction>INIT</SAP:InterfaceAction>
      <SAP:RandomNumber>15</SAP:RandomNumber>
      <SAP:AckStatus>000</SAP:AckStatus>
      <SAP:SkipReceiverDetermination />
      <SAP:Receiver_Agreement_GUID>24422A5646443F8E9D975D57A3EE8162</SAP:Receiver_Agreement_GUID>
      </SAP:RunTime>
    - <SAP:PerformanceHeader xmlns:SAP="http://sap.com/xi/XI/Message/30">
    - <SAP:RunTimeItem>
      <SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
      <SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.5</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
      <SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
      <SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
      <SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
      <SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
      <SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
      <SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
      <SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
      <SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
      <SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_MAPPING_REQUEST</SAP:Name>
      <SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_MAPPING_REQUEST</SAP:Name>
      <SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_OUTBOUND_BINDING</SAP:Name>
      <SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_OUTBOUND_BINDING</SAP:Name>
      <SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_CALL_ADAPTER</SAP:Name>
      <SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
      <SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.656</SAP:Timestamp>
      </SAP:RunTimeItem>
      </SAP:PerformanceHeader>
    - <SAP:Diagnostic xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:TraceLevel>Information</SAP:TraceLevel>
      <SAP:Logging>Off</SAP:Logging>
      </SAP:Diagnostic>
    - <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
      <Trace level="1" type="T">SystemError message generated. Guid: DC98499F7E4274F1A41F0017A4107EE6</Trace>
      <Trace level="1" type="T">Error during execution of message : DC98499CA1EABEF1B4DD00110A63BF06</Trace>
      <Trace level="1" type="T">ApplicationMessage was (=RefToMsgId): DC98499CA1EABEF1B4DD00110A63BF06</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
    - <!--  ************************************
      -->
      </SAP:Trace>
      </SOAP:Header>
    - <SOAP:Body>
      <SAP:Manifest xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-manifest-5CABE13F5C59AB7FE10000000A1551F7" />
      </SOAP:Body>
      </SOAP:Envelope>
    Regards,
    Kishore

    Hi,
    In the HTTP Receiver what is the Addressing Type used ? (URL Address or HTTP Destination).
    If its URL Addressing Type, check if right Authentication Type is used with valid values and for HTTP Addressing Type check this HTTP Client Create Error, it could be helpful.
    Also check if the Target system can be reached from the XI server to validate the configuration parameters.
    Regards,
    S.Santhosh Kumar

  • XML Parser Error while creating Web service Client using JAX RPC

    hello evryone,
    Im facing XML Parser Error while creating web service client using JAX RPC. Im using Net Beans IDE for development purpose. I have wrote configuration file for client. Now i want to create Client stub. However i dont know how to do this in Net Beans. So i tried to do it from Command promt using command :
    wscompile -gen:client -d build -classpath build config-wsdl.xml
    here im getting Error:
    error parsing configuration file: XML parsing error: com.sun.xml.rpc.sp.ParseException:10: XML declaration may only begin entities
    Please help me out.
    Many thanks in advance,
    Kacee

    Can i use the client generated using jdeveloper 11g to import into the oracle forms 10g, i.e., form builder 10g. Currently this is the version we have in our office.

  • WWC-00000 error while creating the user

    Any one can help me on the WWC-00000 error while creating the
    user from the Admin tab of Oralce Portal. In fact I can't use
    the Login server administration. same problem exists.
    I granted DBA privileges to the PORTAL30, just to verify and NO
    use.
    I am using the latest version of Portal S/W on iAS9i 1.0.2.2.1
    - Suneel

    Hi Suresh,
    This error trace is not sufficient to understand the issue and at what step you got this error.
    First tell me, did you got the User Admin Tab in your portal access. if yes.. did you got the next step...which is Identity Management. Please elaborate when did you got this error (i mean at what step) after that only we can give it a try.
    Thanks,
    Vinod

  • Serial number error while creating the production order

    Hello frds,
    I am getting the following error while creating the production order.
    "Item 000000 requires exactly 100 serial numbers for the asset".
    If i give 100 serial numbers in the order, the error is solved. But i do not want to assign 100 serial numbers, i want to assign only 2 numbers.
    I have tried using the new serial number profile also, but it is giving same error.
    Kindly guide.
    Regards,
    Narendra Bora

    Dear Narendra
    Select the serial number profile and go to serialization procedure and set the ser. usage status 02 - Optional as below.
    Procd Procedure description Ser.Usage
    PPRL PP order release 02
    since the serail number creation is optional for order relase this will allow you to relase with out error and with serail number assigned in partial.
    Regards
    Soundar

  • Error while creating the sales order with billing reference

    hi alll
    i am getting error while creating the sales order with billing reference.The line items are coming in grey.I am not able to change the items as well as the quantity field.Can u guide me
    cheers
    shalsa007........

    Dear SAP SD 007
    I can confidently tell that an enhancement or an user exit has been applied in your scenario
    You have to check that
    Normally when creating a sales order with respect or referring billing documents the qty will be in editable mode and it is standard problem
    Your people has solved the standard problem by enhancement
    Usually OR--LF-PGI----F2 (SAY THE QTY IS 25 UNITS)
    Now you are creating returns order with reference to F2 in the return order type Re there is a standard issue that user can edit the qty to 30 from the original 25
    To solve this only your people have used userexit
    Line items and qty greyed out means definately there is some enhancement or user exit applied
    You have to check that
    Regards
    Raja

  • Error While Deploying the BPEL Process using obant script

    Hi All,
    I am getting the following error while deploying the BPEL Process using obant script. we are using the BPEL Version 10.1.2.0.2.Any information in this regard will be really helpful.
    Buildfile: build.xml
    main:
    [bpelc] file:/home5102/dibyap/saravana/Test/CreditRatingService.wsdl
    [bpelc] validating "/home5102/dibyap/saravana/Test/CreditRatingService.bpel" ...
    BUILD FAILED
    /home5102/dibyap/saravana/Test/build.xml:15: ORABPEL-01002
    Domain directory not found.
    The process cannot be deployed to domain "default" because the domain directory "/opt02/app/ESIT/oracle/esit10gR2iAS/BPEL10gR2/iAS/integration/orabpel/domains/default/deploy" cannot be found or cannot b
    e written to.
    Please check your -deploy option value; "default" must refer to a domain that has been installed locally on your machine.
    Total time: 23 seconds
    dibyap@ios5102_ESIBT:/home5102/dibyap/saravana/Test>
    Thanks,
    Saravana

    In 10.1.2.0.2 you need to create your own build.xml
    I have found an example, it may be of some help. This does call a property file
    cheers
    James
    <?xml version="1.0" ?>
    <!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Run cxant on this file to build, package and deploy the
    ASB_EFT BPEL process
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -->
    <project name="ASB_EFT" default="main" basedir=".">
    <!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Name of the domain the generated BPEL suitcase will be deployed to
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -->
    <property name="deploy" value="default" />
    <!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    What version number should be used to tag the generated BPEL archive?
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -->
    <property name="rev" value="1.0" />
    <!-- BPEL Best Practices Properties -->
    <!-- Defaults Properties for TARGET environments
    # CHANGE THIS FILE TO REFLECT THE TARGET ENVIRONEMNT
    # either dev, test, or prod.properties
    -->
    <property file="ebusd.properties"/>
    <property name="env" value="${env.name}"/>
    <property name="current.project.name" value="${project.name}"/>
    <property name="target.project.name" value="${project.name}_${env}"/>
    <property name="deployment.profile" value ="${env}.properties"/>
    <property name="source.development.directory" location="${basedir}"/>
    <property name="target.env.directory" location="${basedir}/deploy/${project.name}_${env}"/>
    <property file="${deployment.profile}"/>
    <property name="build.fileencoding" value="UTF-8"/>
    <!-- Prints Environment
    -->
    <target name="print.env" description="Display environment settings">
    <echo message="Base Directory: ${basedir}"/>
    <echo message="Deployment Profile: ${deployment.profile}"/>
    <echo message="target.env.directory: ${target.env.directory}"/>
    <echo message="Deploy to Domain: ${deployToDomain}"/>
    <echo/>
    <echo message="os.name: ${os.name}"/>
    <echo message="os.version: ${os.version}"/>
    <echo message="os.arch: ${os.arch}"/>
    <echo/>
    <echo message="java.home: ${java.home}"/>
    <echo message="java.vm.name: ${java.vm.name}"/>
    <echo message="java.vm.vendor: ${java.vm.vendor}"/>
    <echo message="java.vm.version: ${java.vm.version}"/>
    <echo message="java.class.path: ${java.class.path}"/>
    <echo/>
    <echo message="env: ${env}"/>
    <echo message="current.project.name: ${current.project.name}"/>
    <echo message="target.project.name: ${target.project.name}"/>
    <echo message="server.name: ${server.name}"/>
    </target>
    <!--
    Copies the current directory structure along with
    all the file into the target.env.directory and
    change the name of the project
    -->
    <target name="create.environment">
    <copy todir="${target.env.directory}">
    <fileset dir="${basedir}"/>
    <filterset begintoken="@" endtoken="@">
    <filtersfile file="${deployment.profile}"/>
    </filterset>
    </copy>
    <move file="${target.env.directory}/${current.project.name}.jpr" tofile="${target.env.directory}/${target.project.name}.jpr"/>
    </target>
    <target name="main">
    <!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    the bpelc task compiles and package BPEL processes into versioned BPEL
    archives (bpel_...jar). See the "Programming BPEL" guide for more
    information on the options of this task.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -->
    <bpelc input="${basedir}/bpel.xml" rev="${rev}" deploy="${deploy}" />
    </target>
    </project>
    here is a property file
    project.name=ASB_EFT
    env.name=ebusd
    deployToDomain=default
    server.name=[server]
    server.port=7788
    ebusd\:7788=http://[server]:7788/
    IntegrationMailAccount=OracleBPELTest
    IntegrationMailAddress=[email]
    IntegrationMailPassword=[password]
    archivedir=[directory]
    inbounddir=/[directory]
    errordir=[directory]
    outbounddir=[directory]
    bpelpw=bpel
    dbhost1=[dbserver]
    dbhost2=[dbserver]
    dbport=1523
    dbservice=bpel
    dbconnstr=jdbc:oracle:thin:@(DESCRIPTION=(LOAD_BALANCE=YES)(FAILOVER=YES)(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=[server])(PORT=1523))(ADDRESS=(PROTOCOL=tcp)(HOST=[server])(PORT=1523)))(CONNECT_DATA=(SERVICE_NAME=ebusd)))

  • Error while creating the HTTP client with destination

    Hi ,
    I am getting this error while connecting to https location on receiver channel . The below error i am getting in SXMB_moni
    Error while creating the HTTP client with destination
    The receiver party is doing some security setting on there end and for that purpose we have provided the external IP address to them , after that we are getting the above error.
    We have already installed the client certificate on our staging server , and have done the correct setting in SM59 and channel.

    Check few things..
    1) I believe you use specify destination for the addressing type field in the comm channel. If so make sure you entered valid target URL address in the SM59 of type http destination.
    2) Check the validitity of the certificate. You can import the certificate both in java and abap stack.
    3) Make sure certificate is installed as expected.
    4) Send the request and talk to the target system and check what error information they get in their log related to ssl.

  • Problems with FL Studio: "Error while creating the ASIO driver."

    I'm trying to use ASIO with FL Studio with my SB Live 24-Bit USB sound card. However, whenever I select "Creative ASIO USB" as my output device, I get the message "Insufficient USB Bandwidth. This device will reset to its default ASIO settings.", followed by "Error while creating the ASIO driver."
    I've tried unplugging all other USB devices, switching USB ports, using a PCMIA USB 2.0 card, using Monster USB cables; all to no avail. It seems to me that there is plenty of USB bandwidth available but ASIO simply refuses to work.
    Here are my laptop's specs (it's ancient but still good enough to run FL Studio):
    P4 3.40GHz HT
    1024MB PC3200 DDR RAM
    SB Live 24-Bit USB sound card
    128MB ATI Mobility Radeon 9700
    Any suggestions?

    So I guess no one could help me then?
    It's OK, though, because I figured out the problem on my own. I had to change the "Device Control" settings in the Control Panel from 16 to 24-bit. Don't know why this would affect USB bandwidth, but whatever.

  • Getting error while creating the variable of Schema Element type

    Hi everybody,
    For creating a variable of schema element type I am doing the following steps...
    Select 'Variables' after right clicking on bpel process. IN this window, go to 'Create VAriable' then select 'Element' type. Now in Type Choose, I expanded the my imported schema files. And selected a element type, then click ok to create this variable... I am getting the message...
    IN ORDER TO SAVE IMPORTED WSDL/SCHEMA FILES, YOU MUST HAVE A PARTNER LINK LOCATED UNDER THE CURRENT PROJECT DIRECTORY.
    What is mean by that.
    I have imported the schema files in project. AFter that I have imported them into the WSDL also. Now why I am getting error while creating the variable. However I can create variable directly in .BPEL file then everything is fine. And it is working also. But what is mean with the above error? Why I am not able to create variable through GUI?
    Thanks.

    Hi,
    I have this same problem this morning, and I was going crazy, until I found this webpage on the internet:
    [http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process|http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process]
    The idea is that the jdeveloper is not very good working with directories with spaces on the directory name. If you move all your work to a directory without spaces, it will work smoothly. At least, it had worked for me.
    Regards,
    Nacho

  • Error while creating the 'LOV' type parameter in Siebel 8.1.1.5

    Hi,
    One of my Customer is facing the below error while creatting the parameter of type 'LOV' in Parameter applet in Siebel 8.1.1.5
    Runtime Error!
    Program: C:\Program Files\Internet Explorer\iexplorer.exe
    This application has requested the Runtime to terminate it in an usual way. Please contact the application’s support team for more information
    Could some please let me know what would be the reason for this issue?
    Thanks in advance for your help.
    Thanks,
    Ravi

    Please close this thread...it appears that the error occurs when the report involves a big set of records. I tried trying to filter only one record and was able to produce the pdf

Maybe you are looking for

  • "Memory  Sizing" error on Sun Fire V65x

    Hello. I have some trouble with my old Sun Fire V65x and i hope that you guys can help me out. I had 2,5GB RAM installed in my server, working flawless. 2 x 256MB and 2 x 1GB modules. 256-modules in Bank 1 and 1GB´s in Bank 2. To get rid of the boot

  • Purchased items not showing in Purchased View

    So I have this view of an album in the iTunes store, clearly showing it was purchased. http://i.imgur.com/50nuXQm.png but the album is not visible in my 'Purchased' view via iTunes or any other device. What gives? I contacted support and a 20 minute

  • Problems with usb / sd removable devices (not/badly copying)

    Hi everybody the problem is when I plug an usb stick or a SD card, all with FAT32 fs, GNOME (I use gnome-shell) asks me if I want to mount and open the device. so, it loads properly and when it's open I can do all the things you are supposed to do wi

  • Image map bug in RH7

    Hi, I've noticed that sometimes after I create a rectangle over an area in the image, the rectangle is not visible. To see the rectangle, I save the topic. Close and re-open the topic. Now, I can see the rectangle, and assign a link, add a screen tip

  • ACR 4.6 and PSE6 Organizer still crashes

    I posted this a long time ago for ACR 4.5 and I'm gonna do it again for CR 4.6. Please read below I'm still having the same problem with ACR 4.6 (BETA). I'm experiencing the following problem when I download ACR 4.5 to be used with PSE6. The problem