Error while creating transformation from DSO to InfoCube
Hi Gurus,
When i am creating tranformation from DSO to InfoCube getting an error, " The unit/currency 'Source Currency 0CURRENCY ' with the value 'space' is assigned to the key figure 'Source Key Fig. ZAMT_PLC ' with the value
'8.50 ' "
ZAMT_PLC is created with 0CURRENCY.
On checking we found that there is no value stored for Currency field in table level itself. Now in this case how do we avoid this error.
I want to know why is this we need to have value for 0Currency field???
Thanks & Regards,
Anup
Hello Anup,
If you load a key figure which has a unit assigned to it,
then for every records where the key figure has a valid value
(value 0) the corresponding unit has to be delivered as well.
Additionally please check note 1366474 regarding the RSTRAN 312
error message:
"The corrections contained in Note 1165168 are incomplete.
Depending on the sequence during loading, the system may not issue error
message RSTRAN 312 even though data regarding the assigned unit or
currency "space" is incorrect."
This means actually, that the system should have issued the RSTRAN312
error message even before the upgrade, but for some reason this
check found no issues in some constellations. This means furthermore
that your system behaved incorrectly in the past, that this
error message was not triggered if you loaded key figures without
any unit.
I'm sorry to tell you, but the system behaves and works as designed
as it should be even before the correction from note 1366474.
Please change your transformations for key figures which
have a unit assigned, that the unit field is filled correctly.
with the corresponding units, otherwise the system will abort
the processing of the data with the above mentioned error
message.
Best Regards,
Des
Similar Messages
-
Error while loading data from DSO to Infocube
Hi all,
I'm loading data from flat file to the cube via a DSO. I get an error in the DTP.
The data loads to the DSO, i'm able to see the contents in the active data table.
Transformation from DSO to Cube is activated without any errors. Its a one to one mapping. No routines used.
When i execute the DTP ( i use full load option as it is a one time load) i get the following error in DTP: All of which are Red.
Process Request
Data Package 1: Error during processing
Extract from DSO XXXXX
Processing Terminated
The long text of the error gives the msg: Data package 1: Processed with errors RSBK257
ThanksHi,
You can check the below forums.
DTP with error RSBK257
- Jaimin -
Error while creating transformation for DSO in SAP BI
While creating a transformation for DSO in SAP BI, I got an error "Data source xxx (FS_xxx) does not exist in version A". I would like to know what this error is all about and how to resolve this issue.
Thanks.
BhusanHi Bhusan,
You have to activate your datasoure to make it as an ACTIVE version.
SO in RSA1>Modelling>Datasouces--> find your datasource name and activate it first.
Then create your transformation and continue with other steps.
Hop it helps
Regards,
Arun.M.D -
Error while loading data from DSO to Infocube for 0Fiscvarnt
Hi All,
Could you please help me any one to resolve the below error.
*"Fixed value discrepancy with InfoObject 0FISCVARNT value 'K4 ', expected 'K2 " (MessageClass RSAU).
We have two Staging DSO's upto Second level DSO FiscalyearVariant both K2 and K4 updating, but second level DSO to infocube data loading we had a above problem. all are direct mapping, no routiunes or constants at all transformation level.
But we checked R/3 side both K2 and K4 variants are available.
Thanks,
RameshHi,
It's a constant issue I met before. I guess you have assigned a constant value K2 in your target ODS.
Please change the constant back. Go to RSA1, change target ODS, find 0FISCVARNT, right click it and choose 'Provider-specific Properties', remove K2 from 'Constant'.
Now try the reload and I'm sure no more issues. If you really want the constant then you have to change data or transformation.
p.s. Don't forget re-activating transformations and DTP
Regards,
Frank
Edited by: Frank Lee on Jul 14, 2009 3:13 PM -
Error while creating DTP from DS to Infoobject
Dear All,
I am getting one error while creating DTP from Datasource to Info object can any one give some suggetion regarding this issue.
Issue:Enter a valid value
Msg No:00002
Procedure: Display the allowed values withF4 and correct your entry,
Regards,
SatyaHi Satya,
Trying logging off the system and log in again and try to activate Data source Infoobject and transformation again and try creating DTP by selecting Selecting the source system by pressing F4. I hope it should work.
I don't find any specific problem or any patch problem with the error you are getting.
Hope it helps !
Regards,
Rose. -
Error while creating transformation in BI
Hi Experts,
Could you please help me in sloving the below two points in BI.
1. While creating transformation from Data source to infosource in BI, it was throwing error 'Active version of emulated 3.x DataSource XXXXXXX cannot be displayed'. The source system here is another BW 3.5 system. Please help how to create transformation for this.
2. While adding no-cumulative key figure to infosource it gave error ' non-cumulative key figures can't be added to infosource'. Is there any way to add these type key figures to infosource.
Could you please give solution for the above.
Thanks
Konda ReddyHi,
Check the DataSource is in which version, i mean is it in 3.x or 7. Because we can create the transformations if and only if the DataSource is in 7 version. If it is in 3.x, it will allow u to create Transfer rules. So first migrate the DataSource form 3.x to 7 suing tcode RSDS.
Non-cumulative keyfigures are loaded directly from datasource to data target. System not allows u to maintain at InfoSource level ( I am not sure about this, confirm once).
Hope this helps in solving u r problem
Regards
Ramakrishna Kamurthy -
Error in uploading data from DSO to Infocube in 3.5(rsa1old)
While uploading data from DSO to Infocube, I selected Initial update option
In schedule tab when I clicked start, an error occured it says:
Delete init request
REQU_D4YTAGX8PEOUQJLSKOEPH9EV before running
init. again with same selection.
Can anyone let me know how should I delete that request.
Thanks,
Soujanya.Hi,
Go to RSRQ and enter the request then execute. This should bring you to Monitor u2013 Administration Workbench. From there you will see the InfoSource (usually has u201C8u201D as a prefix). Get the InfoSource name. Go to RSA1 to find the InfoSource. From here it gets a bit tricky. Go to the datasource and drill down to the related InfoPackage. Go to Infopackage scheduling. Then go to Scheduler Menu, the Initialization Options for Source System should be open. You can see from there the request with error. Let me know if this answers your question.
Regards,
JD Datuin -
Error while creating subsite from site template
Hi,
I am getting below error while creating subsite from existing site template .
Sachin BhosaleThere must be a duplicate Email field created in any list/library. The cause can be identified by renaming the site template to sitename.cab > extact the cab file > open the manifest file search for email and see where it is associated. Refer
to the following blog post for more information
http://sharepointserved.blogspot.com/2012/11/a-duplicate-name-was-found.html
http://sharepoint.stackexchange.com/questions/11944/error-when-creating-a-site-from-custom-template-a-duplicate-field-name-name
Cheers, -
Password Violation error while creating users from Admin interface
Guys,
The Sun Identity Manager system throws policy violation error while creating users from Sun Identity Manager Admin interface.
Current System:
1. I have configured TAM Pass-Thru authentication for End User Login Application.
2. I have an admin user 'testsjimadmin1' who has admin capabilities. testsjimadmin1 user has default SJIM password policy.
3. I have custom password policies configured for different orgainizatoions
Problem:
1. The Sun Identity Manager throws a password policy violation error when 'testsjimadmin1' tries to create an user with valid or invalid password from Sun Identity Manager Admin interface.
2. If TAM Pass-thru authentication is removed for 'End User Login Application' and Sun Identity Manager default authentication is configured for 'End User Login Application' then testsjimadmin1 was able to create user successfully without any errors.
Please let me know if any configurations are required to be made on Sun Identity Manager for TAM Pass-Thru authentication so that admin users can create users successfully from admin interface.
Appreciate your help!!!
Thanks
VijayGuys,
The Sun Identity Manager system throws policy violation error while creating users from Sun Identity Manager Admin interface.
Current System:
1. I have configured TAM Pass-Thru authentication for End User Login Application.
2. I have an admin user 'testsjimadmin1' who has admin capabilities. testsjimadmin1 user has default SJIM password policy.
3. I have custom password policies configured for different orgainizatoions
Problem:
1. The Sun Identity Manager throws a password policy violation error when 'testsjimadmin1' tries to create an user with valid or invalid password from Sun Identity Manager Admin interface.
2. If TAM Pass-thru authentication is removed for 'End User Login Application' and Sun Identity Manager default authentication is configured for 'End User Login Application' then testsjimadmin1 was able to create user successfully without any errors.
Please let me know if any configurations are required to be made on Sun Identity Manager for TAM Pass-Thru authentication so that admin users can create users successfully from admin interface.
Appreciate your help!!!
Thanks
Vijay -
Error while creating datasource from table MBEWH
Hi all,
I am facing an error message while creating datasource from table MBEWH
"Invalid extract structure template MBEWH of DataSource "; This operation failed, because the template structure quantity fields or currency fields, for example, field LBKUM refer to a different table.
Can anyone help me that why system is not allowing me to generate generic datasource for table MBEWH to transfer my month wise inventory data.
thanks and regards.Hi Zakir,
This was comming for classification data... when ever you want to extract some classification related data then we can't create generic datasources directly.. for that you need to go with CTBW ( tcode ) and create one datasource...
so, you need to check that related table also.. for that MBEWH table..
ALL THE CLASSIFICATION RELATED DATASOURCES WE CAN'T CREATE DIRECTLY... JUST LIKE AUSP table also.. liek this..
regards
@jay -
Error while Creating PO from Purchase Requistion in Third Party Sales
Dear Team,
While Creating the Purchase Order from Purchase Requistion in Third Party Sales. When I am saving the PO I am getting the Error in GL Account Cannot be Used. I have disabled the field G/L Account in settings of Account Assignment Category of Third Party. Still I am facing that Error while Creating Purchase Order. Can you guide me where we do this Assignment of G/L Account so that I can change the G/L Account.
Thanks,
Farhan.Dear Farhan,
1. Go to T. Code: FS00 and enter GL number and Company Code and go to Tab: Create/bank/interest, write down the field status group.
2. Go to T. Code: OBC4 and Select your Field Status Variant and Double Click: Field Status Group (From Left-hand Dialog Structure)
Double-Click on to Field Status Group (as noted down from in Step 1).
From Select group, Select Additional account assignments and make Earmarked Funds, as optional.
Best Regards,
Amit -
Error while creating datasource from view ZBSIS_VIEW
Hi all,
I could not create the datasource on the database table BSIS as it said "Invalid extract structure template BSIS of Datasource". I had suggestions that I should create a view and then create the Datasource on it. So I created the view and tried. But still I am facing an error message while creating datasource from custom Database View ZBSIS_VIEW.
"Invalid extract structure template ZBSIS_VIEW of DataSource"
Can anyone help on this regard.
thanks.Hi,
Yes. You need a create a view on tables BSIS, BKPF and T001 as the currency/quantity fields in BSIS have reference fields from the other 2 tables.
In BSIS, in the currency/quantity fields tab, you have some ref tables and fields. You would need to include these tables and join in the view. You would also need to include the ref fields like WAERS, HWAE2, HWAE3, etc in the view. Then you would be able to create the datasource. -
Getting error while creating table from one database to other.
Hi,
We are getting below error while creating the table from one database to other.
SQL> create table fnd_lobs parallel compress as select * from [email protected];
create table fnd_lobs parallel compress as select * from [email protected]
ERROR at line 1:
ORA-01555: snapshot too old: rollback segment number 28 with name "_SYSSMU28$"
too small
ORA-02063: preceding line from EEXIT2TEST
ORA-01555: snapshot too old: rollback segment number 28 with name "_SYSSMU28$"
too small
ORA-02063: preceding line from EEXIT2TEST
ORA-01555: snapshot too old: rollback segment number 28 with name "_SYSSMU28$"
too small
ORA-02063: preceding line from EEXIT2TEST
ORA-01555: snapshot too old: rollback segment number 28 with name "_SYSSMU28$"
too small
Regards,
Bhatiahi
what are the apps version local and remote database???
Snapshot too old errors occur because Oracle can 't reconstruct a consistent
image of a block for the purposes of a consistent read.
I feel at remote database, you are using UNDO, it will be rather easy to iincrease the undo retention time or increase the undo tablespace size.. if you are dealing with roll back segments, you may have rollback segments whose optimal values are too small...
increase roll back segments size and select again then
the following metalink notes might be helpful
ORA-01555 "Snapshot too old" - Detailed Explanation Doc ID: 40689.1
How To Avoid ORA-01555: Snapshot Too Old When Running PAAPIMP Doc ID: 603259.1
OERR: ORA 1555 "snapshot too old (rollback segment too small)" Doc ID: 18954.1 -
ORA-12571 error while creating packages from Windows clients
Hello,
We are facing the ORA-12571 error while creating / replacing packages from Windows Clients connected to a 8.1.7.2.0 db on a Solaris server.
However, there are
1. no errors in connecting and creating transactions from a Sql session
2. no errors in creating / replacing unwrapped/wrapped small (few lines) packages
3. no errors in connecting from a Unix session (remote telnet sessions inclusive).
This happens only when creating wrapped/unwrapped packages, source code of which is greater than 500 kb approx.
Can somebody help me resolve this issue. Any Help would be greatly appreciated.
Regards.
Lakshmanan, KUpdate: I had unintentionally left my custom tablespace in READONLY state after an earlier experiment with transportable tablespaces. After putting the tablespace back into READ WRITE mode and creating a new template, I was successfully able to create a new db from the template.
I'm still a little curious why this procedure wouldn't work properly with a READONLY tablespace, however.
Ben -
Budget error while creating delivery from sales order
hi Gurus,
System is throwing error PB603 "Item 004 WBS element ABC-XXX budget exceeded" while creating delivery from sales order.
I am picking material from unrestricted plant stock (not in project stock).
I am also confused as sales order has 3 line items & error shows Item 004 !Hi Kuldeep,
Check this note,
Note 159387 - Message BP603: incorrect line item is displayed
Its valid only till 4.6. Might give you some idea but.
Regards,
Gokul
Maybe you are looking for
-
This started a few days ago, when I noticed skype would not open and keeps quitting unexpectingly. Now it's all of my microsoft office programs. I have read horrible things on the internet about creeps building some sort of 'backdoor' through Mircoso
-
How do I permanently erase my entire MacBook Pro 2011?
I am giving my Mac to somebody and don't want any recoverable traces of me to be on my computer. It's a MacBook Pro 2011 13" but it has Yosemite 10.10.1
-
Oracle jdbc driver with debug capability
I have been using MagicDraw UML to reverse engineer DDL and UML classes from Oracle databases. I recently loaded some public domain hydrology data using FEM, a geophysical data translation tool. After doing this, I get: Parsing failed (Oracle - sampl
-
Linking .swf file to Dreamweaver
Thank you soooooooo much it worked smoothly and the way I want . Cheers
-
Getting back my old iweb page?
I had to reinstall my OS, and now, I have my iweb site up on the web, but when I go to update it, since I reinstalled, there is a "clean site" on iweb. How do I get my site back?