Error while creating "Transformation" in BI 7.0
Hello Guys
I am getting the following error when I am creating a transformation between a Datasource and an Infosource in BI 7.0
" Syntax error in GP_ERR_RSTRAN_MASTER_TMPL, row 1,644 (-> long text)"
When I go into the program: GP_ERR_RSTRAN_MASTER_TMPL, here is the error:
<b>CODE:</b>
*-- Check against ODS
l_odsobject = i_s_tlogo_0BASE_UOM-objnm.
CLEAR l_s_chavl_t.
l_s_chavl_t-fieldnm = 'UNIT'.
<b>l_s_chavl_t-chavl = i__s_TG_1-UNIT.</b>
APPEND l_s_chavl_t TO l_t_0BASE_UOM.
<b>ERROR MESSAGE:</b>
Program GP_ERR_RSTRAN_MASTER_TMPL
The data object "I__S_TG_1" does not have a component called "UNIT".
Program GP_ERR_RSTRAN_MASTER_TMPL
Can someone explain this?
Thanks.
Hi Chintai,
Try oss notes :-
1008381
957028
977922
Cheers,
Pom
Similar Messages
-
Error while creating transformation in BI
Hi Experts,
Could you please help me in sloving the below two points in BI.
1. While creating transformation from Data source to infosource in BI, it was throwing error 'Active version of emulated 3.x DataSource XXXXXXX cannot be displayed'. The source system here is another BW 3.5 system. Please help how to create transformation for this.
2. While adding no-cumulative key figure to infosource it gave error ' non-cumulative key figures can't be added to infosource'. Is there any way to add these type key figures to infosource.
Could you please give solution for the above.
Thanks
Konda ReddyHi,
Check the DataSource is in which version, i mean is it in 3.x or 7. Because we can create the transformations if and only if the DataSource is in 7 version. If it is in 3.x, it will allow u to create Transfer rules. So first migrate the DataSource form 3.x to 7 suing tcode RSDS.
Non-cumulative keyfigures are loaded directly from datasource to data target. System not allows u to maintain at InfoSource level ( I am not sure about this, confirm once).
Hope this helps in solving u r problem
Regards
Ramakrishna Kamurthy -
Error while creating transformation for DSO in SAP BI
While creating a transformation for DSO in SAP BI, I got an error "Data source xxx (FS_xxx) does not exist in version A". I would like to know what this error is all about and how to resolve this issue.
Thanks.
BhusanHi Bhusan,
You have to activate your datasoure to make it as an ACTIVE version.
SO in RSA1>Modelling>Datasouces--> find your datasource name and activate it first.
Then create your transformation and continue with other steps.
Hop it helps
Regards,
Arun.M.D -
Error while creating transformations
Hi,
I am new to BI 7.0, i m getting error while i creating transformations on my cube. i am loading flat file and my file structure is
Sales ord
Customer
Price
Calday
I have assigned the price as Fixed currecy to 'USD'
i`don't think we have to add the currency field in flat file structure
i m getting the following error
Rule 4 (target field: ZRA_PRICE): Field NETPRICE must be assigned to an InfoObject
Rule (target field: ZRA_PRICE): No source unit assigned
pls suggest
Regards,
Suri+Rule 4 (target field: ZRA_PRICE): Field NETPRICE must be assigned to an InfoObject+
Check if you have Direct Assignment set up after the mapping.
RClick - Rule Details - Direct Assignment - Have it mapped.
Rule (target field: ZRA_PRICE): No source unit assigned
How did you define ZRA_PRICE, with currency USD or 0LOC_CURRCY or ??
Just recheck ...and have the 0CURRENCY set to constant to USD in the Target...it need not exist in the Source. -
Error while creating transformation from DSO to InfoCube
Hi Gurus,
When i am creating tranformation from DSO to InfoCube getting an error, " The unit/currency 'Source Currency 0CURRENCY ' with the value 'space' is assigned to the key figure 'Source Key Fig. ZAMT_PLC ' with the value
'8.50 ' "
ZAMT_PLC is created with 0CURRENCY.
On checking we found that there is no value stored for Currency field in table level itself. Now in this case how do we avoid this error.
I want to know why is this we need to have value for 0Currency field???
Thanks & Regards,
AnupHello Anup,
If you load a key figure which has a unit assigned to it,
then for every records where the key figure has a valid value
(value 0) the corresponding unit has to be delivered as well.
Additionally please check note 1366474 regarding the RSTRAN 312
error message:
"The corrections contained in Note 1165168 are incomplete.
Depending on the sequence during loading, the system may not issue error
message RSTRAN 312 even though data regarding the assigned unit or
currency "space" is incorrect."
This means actually, that the system should have issued the RSTRAN312
error message even before the upgrade, but for some reason this
check found no issues in some constellations. This means furthermore
that your system behaved incorrectly in the past, that this
error message was not triggered if you loaded key figures without
any unit.
I'm sorry to tell you, but the system behaves and works as designed
as it should be even before the correction from note 1366474.
Please change your transformations for key figures which
have a unit assigned, that the unit field is filled correctly.
with the corresponding units, otherwise the system will abort
the processing of the data with the above mentioned error
message.
Best Regards,
Des -
Getting Error Message while creating transformations
While creating transformation for char customer no in the rule type for constant , getting an error message source parameter 0001 is not being used.
Hello Bharati,
you need to give the value of the constant by selecting from the source parameter.Hope this answer helps you.
Assigning Points = Thanks in SDN
Thanks & Regards
Jai -
Error while activating transformation ---- Message no. RSTRAN510
Hi,
while I am Extrating Data From Flat File I encountered this Error.
I am working on <b>ECC 6.0 , BI 7.0.</b>
I am trying this one in IDES, it is newly installed server.
For Flat File Extraction I follwed the Steps
1) I created Data source -
let us assume I have created a Flat File with 3 fields
SNO SNAME MARKS
File is located in workstation
Data source created successfull , I have checked in preview.
2) I have created 2 key Figures, 1 characteristic
3) I have created Infocube
<b>here I have some doubt</b>
while I am creating Infocube, the look and Feel is very different to 3.XX
when i try to create in 3.XX , we can see the Tabs for Kef figs,chars,Time chars and we assign chars to Dimenstions.
when i am creating Infocube in BI 7.0 , I don't Find such a Tabs and how I am assign the chars to Dimension
I created Like this
select
Info Area -
> create Info cube -
given name of the cube and create (F5).
the Info cube window displayed on the Right side
Then I did like this
select
key Figures -
> Info object Direct Input
Then I inserted my two key figures SNO,MARKS
--- continue (F5)
Dimension 1 -
> Info object Direct Input
I inserted the 1 char SNAME
--- continue (F5)
Then I saved the Info cube
Info cube saved successfull and activated successfull
<b>Is it Right way For create InfoCube ?</b>
4) I created Transfomation for the Data source
Data source -
> create Transfomation
I have given
Object Type : InfoCube
Name :YSTU - i selected which I already created.
It automaticall taken these parameters
Obejct Type : DataSource
Data source : YSTU
source system :PC_FILE
create Transformation (Enter)
I got the Error
<b>Cannot generate proposal</b>
<b>Message no. RSTRAN017</b>
Then I try to activate, I got the Error.
<b>Error while activating transformation</b>
<b>Message no. RSTRAN510</b>
Before I post this , I had searched in Previous SDN post for this Error , But I can't understand the solution.
I have lot of doubts like <b>Basis Guy need to install any Patch</b> or
I did mistake any where.
Help me to Find the solution...
sure you can get the points
Thanks
prasannaThank You so much Voodi, yes you are Right , I am not concentrated on Mapping, Now Transformation is activated.
and i created Info Package too for the Data source , created successfully.
I am struck on Final step <b>creating DTP</b>
when I am creating DTP
Data Transfer Proc : here I need to give the Dtp name ex: YDTP
DTP Type : Standard (Can be sheduled)
Target of DTP
<b>Object Type</b> : Info cube
<b>Name </b> : YSTU (This is my Cube Name)
Source of DTP
<b>Object Type</b> : Data source (It automatically Taken)
<b>Data source</b> : This is Disabled
<b>Source system</b>: This is Disabled
continue (Enter)
I got the message ?
<b>Specify Name of source</b>
and courser is in <b>Data Transfer Proc </b>
Thanks
prasanna -
Short Dump while creating transformation in BI
Dear fr,
I am extracting data from a system and passing this data to an infocube
But while creating transformation getting the follwing error
Cannot generate proposal
Message no. RSTRAN017
Please help will reward points for sure.Hi,
Seems others already had this problem before: /thread/347000 [original link is broken]
regards,
Csaba -
Error while creating DTP from DS to Infoobject
Dear All,
I am getting one error while creating DTP from Datasource to Info object can any one give some suggetion regarding this issue.
Issue:Enter a valid value
Msg No:00002
Procedure: Display the allowed values withF4 and correct your entry,
Regards,
SatyaHi Satya,
Trying logging off the system and log in again and try to activate Data source Infoobject and transformation again and try creating DTP by selecting Selecting the source system by pressing F4. I hope it should work.
I don't find any specific problem or any patch problem with the error you are getting.
Hope it helps !
Regards,
Rose. -
Error while activating transformations? can you please help me
Hi
I am trying to create info cube , i created info objects, info cube,datasource. when i am trying to creat transformation it is throwing and error :
Error while activating transformation
Message no. RSTRAN510
Can any one help me?
SrinathHi
I think you are trying to activate the transformation.
Have you tried to generate proposal?
I think you will get the following error message :
Cannot generate proposal
Message no. RSTRAN017
the system would never generate a proposal . u need to map the fields manually in the transformations... after u map it ... check the mapping and activate it ...
Due to this when you are going to activate the transformation it is throwing this error message.
If this works kindly assign me some points.
Regards,
Debjani.. -
Error while creating a new connection in ODSM for OVD
Hi all,
I am getting the following error while creating a new connection in ODSM for OVD.
Error log:
[2012-07-10T14:50:30.005+05:30] [wls_ods1] [ERROR] [] [oracle.adfinternal.view.faces.config.rich.RegistrationConfigurator] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JXkC9dU3FClqwsJb6G1FyhO000003D,0] [APP: odsm#11.1.1.2.0] Server Exception during PPR, #7[[
javax.servlet.ServletException: Could not initialize class com.octetstring.vde.admin.services.client.VDEAdminServiceSoapBindingStub
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:277)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by:
=======
java.lang.NoClassDefFoundError: Could not initialize class
com.octetstring.vde.admin.services.client.VDEAdminServiceSoapBindingStub
at com.octetstring.vde.admin.services.client.ServerMgrServiceLocator.getVDEAdminService(ServerMgrServiceLocator.java:58)
at oracle.ldap.odsm.model.ovd.APServerProxy.connect(APServerProxy.java:248)
at oracle.ldap.odsm.model.ovd.APServerProxy.authenticateAs(APServerProxy.java:684)
at oracle.ldap.odsm.model.ovd.APServerProxy.authenticate(APServerProxy.java:286)
at oracle.ldap.odsm.model.ovd.APServerProxy.init(APServerProxy.java:216)
at oracle.ldap.odsm.model.ovd.APServerProxy.<init>(APServerProxy.java:198)
at oracle.ldap.odsm.model.ovd.OVDRoot.connectOVD(OVDRoot.java:185)
at oracle.ldap.odsm.ui.common.Connection.connect(Connection.java:120)
at oracle.ldap.odsm.ui.common.Visit.createConnection(Visit.java:663)
at oracle.ldap.odsm.ui.common.Login.saveChanges(Login.java:215)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sun.el.parser.AstValue.invoke(Unknown Source)
at com.sun.el.MethodExpressionImpl.invoke(Unknown Source)
at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53)
at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1245)
at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.broadcastEvents(LifecycleImpl.java:812)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:292)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
... 28 more
How to resolve this issue.Pls suggest me.
Regards,
-Deena.Hi Deena,
This error:
"[2012-07-10T14:50:30.005+05:30] [wls_ods1] [ERROR] [] [oracle.adfinternal.view.faces.config.rich.RegistrationConfigurator] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JXkC9dU3FClqwsJb6G1FyhO000003D,0] [APP: odsm#11.1.1.2.0] Server Exception during PPR, #7[[
javax.servlet.ServletException: Could not initialize class com.octetstring.vde.admin.services.client.VDEAdminServiceSoapBindingStub"
is known issue
Go to metalink, article: Unable To Connect To OVD 11g Webinterface Using ODSM. [ID 1282757.1]
You need to apply that patch.
I hope this helps,
Thiago Leoncio. -
Error while creating a recipe in plm..
Hi every one,
System throughing below error while creating a recipe.
"Entries in status management Customizing are incorrect"
kindly suggest.
have a good day..
regards,
kirranHi Kirran,
Please see if you have defined a status scheme and assigned it to the recipe type. Before defining a status scheme, you must complete the one time IMG activity 'Collect Object Types and Assigned Attributes' under Recipe Development > Status Management. Then in the next node you define individual statuses and a scheme with transitions. For each status, you must define 'field value' for the field RCP_USAGE which is nothing but a value from Recipe Purposes customizing.
Hope this helps.
Regards,
Rajeev -
Hi all,
I have got an error while creating a PO with an Internal Order. I am trying to post this PO against an Internal Order. The error message says that:
User status BUDG is active (ORD 10034). When I click the perform assistant, it says that according to this status, transaction 'Material purchase order' is not allowed.
Can somebody plss help me in this regards, I will assign points.
Thank you,
SonyWhat you enter in the Cost element master data is only for defaulting the cost center or order when you use that GL account.
When you see a message transction requires an account assignment, you can enter the relevant cost center for which the cost is incurred.
For your information, If an order has been marked as statistical, you can find it in KO02 change order > Control data. there may be check box saying statistical. If it is not available, then, you can't make it statistical until, you make that field available for change for the order type. Usually orders of a particular type can be made as statistical, by providing a model order to the order type. In the model order you specify that it will be statistical. -
Error while creating a report in BI publisher
Hi all ,
I am getting an error while creating a new report in BI publisher .
the error shown in console is --
java.lang.SecurityException: /
In the front end - i am getting
Operation failed: d:/OracleBI/xmlp/XMLP/Users/~administrator/annapurna/test/test.xdo
please suggest if anyone knows.Hi,
I am newly using BI publisher . I am using 10.1.3.4.0 . I am just trying to create a report in test name. that is the first step to create a report where i am getting error. I am using default RPD paint , where all the user and Groups are defined . -
Error while creating a new Domain in BEA Weblogic
I am getting the below mentioned error while creating a new Domain in BEA Weblogic
Preparing...
Extracting Domain Contents...
Creating Domain Security Information...
Saving the Domain Information...
Storing Domain Information...
String Substituting Domain Files...
Performing OS Specific Tasks...
Performing Post Domain Creation Tasks...
Domain Creation Failed!
Domain Location: C:\bea\user_projects\domains\base_domain_1
Reason: Got error in writing the node manager C:\bea\wlserver_10.0\common\nodemanager\nodemanager.domains property file!
Exception:
java.lang.Exception: Got error in writing the node manager C:\bea\wlserver_10.0\common\nodemanager\nodemanager.domains property file!
at com.bea.plateng.domain.DomainNodeManagerHelper.registerDomainToNodeManager(DomainNodeManagerHelper.java:138)
at com.bea.plateng.domain.DomainNodeManagerHelper.registerDomainToNodeManager(DomainNodeManagerHelper.java:170)
at com.bea.plateng.domain.DomainGenerator.generate(DomainGenerator.java:435)
at com.bea.plateng.wizard.domain.gui.tasks.DomainCreationGUITask$1.run(DomainCreationGUITask.java:232)Hi,
It look two ways either you dont have permission to write any new thing to that domain.properties file or might file is got corrupted.
Please check for the permission to that file.
Regards,
Kal.
Maybe you are looking for
-
How do you un-install Lion and go back to Leopard?
How do I un-install Lion and return to Leopard?
-
IOS app rejected due to a blank, black screen upon launch
I recently got my iPhone app rejected and the reason is below: "We found that your app exhibited one or more bugs, when reviewed on iPhone 5 running iOS 6.1.3, on both Wi-Fi and cellular networks, which is not in compliance with the App Store Review
-
hi, we using the HP color printer -HP LJ 300-400 M351-M451 6 and it prints pretty messy. It shows blue lines and the edge has black and blue lines. we tried to self clean and the test paper was clean. Do you have any clue? Thank you
-
Airplay audio streaming from Iphone to ATV crashes when changing randomly title?
Why does airplay audio streaming from Iphone 4S iOS 7.04 crashes when changing randomly title? The ATV is not connected to a TV, only to an AV Receiver. Anywhere the same problem? Thx a lot Nolame
-
How to use serial numbers in Crystal Reports?
I want to use serial numbers in Invoices and Packing Lists in the report I built in Crystal. Is there a easy way to do that? I searched the forum but no helpful answers could be found.......