Error while Creating Travel Request ..thru TRIP

Dear all,
As I am suppose to creat a travel request thru TRIP but i am geting the below error and the msg no..............
Error: Trip country IN / trip region do not exist in the system (T702O)
Message no. PTRA_WEB_INTERFACE031
As Mr. Paulo Vitoriano suggested me to Define Trip Areas, etc......... but my Trip Areas has already been defined and i have checked it also .... but still the error is same ....... so frnds pls tell me wat else may be the problem....
I read thred Error while Creating Travel Request ..thru TRIP which is posted by prasanth but what they suggested i maitained already but still i am facing same problem could you pls suggest me where i missed.
Waiting for Reply.
Regards,
Nagaraju

Hi,
Please check the following:
1. Just check have you assigned country India to the trip provision variant you have created.
2. Just check whether you have assigned the trip provision variant correctly to the respective country.
Regards,
S.Srikanth

Similar Messages

  • Error while creating Travel request

    Dear All,
    ESS 2005/SP6
        While creating travel request in I am getting following error
    "Errors have been discovered when checking the Expense Report. Please correct them in order to proceed."
    Regards,
    Kamal Rawal

    Hello Kamal
    Did you manage to resolve the issue in relation to "Errors have been discovered when checking the Expense Report."?
    Best Regards
    Roger Earle
    [email protected]

  • Creating Travel request with TRIP Getting Error 'Infotype P0017 could not be read'

    Getting this error while creating travel request with TRIP transaction code. Please help for an alternate way to create Travel request or help to resolve this issue.
    If this error is due to 0017 maintenance, please help me to maintain infotype 0017.

    Hi
    This is done by functional Guy
    As work around
    Go to transaction PA30 to open master record of employee for whose trip need to be created type 17 at infotype ->  enter F5  and Save.
    With regards,
    Gopala Krishna

  • Displying wrong data after entering estimated cost while creating travel request.

    Hi Team,
    We are facing an issue while creating travel request from portal.
    When we are entering estimated cost and after clicking on save and send button we are getting data is saved as correct.But after clicking on display form button the data is showing as different.
    But after clicking on display form it is showing as 298900(adding two zeros at end for every cost).
    Please help on this.
    Thanks & Regards,
    Kumar.

    Hi Shankar,
    Thanks For the reply. Can you please let me know what settings need to be there in SU3. This issue is effecting for all the users belongs to that country. Can you please suggest me!!
    Thanks in advance.
    BR,
    Kumar.

  • Portal runtime error on creating Travel Request

    I have copied the standard ESS Role and created my own ESS Role. I then assigned this to my portal user.
    Then when I log into the portal as the user and click on "Create Travel Request" or "Create Expense Report" URLs, I get the following error:
    Portal runtime error.
    An exception occurred while processing your request. Send the exception ID to your portal administrator.
    Exception ID: 04:53_02/02/10_0021_23623650
    Refer to the log file for details about this exception.
    Is there any portal/IMG setup that is missing? Or any authorization missing?

    Thanks I made changes to Resources node in IMG.
    Before making these changes I was getting the following error:
    Portal Runtime error. An exception occured while processing your request... Exception ID:.... Refer to log for details....
    I just changed the URL of PCD page in the Resources node.
    Note:
    (1) In Portal I have made my own folder structure:
    -> Portant Content
    -->My Travel Setup
    --->Employee Self-Service
    >Roles
    >MyTravelESS (role copy of the original Portal ESS role, Delta link. i.e. ESS role under End User Content-->Employee Self-Service)
    (2) I have not copied the iviews, pages worksets etc. under my new folder structure.
    But Now I am getting another error:
    500 Internal Server Error...
    Root Cause
    The initial exception that caused the request to fail, was:
    com.sapportals.portal.prt.runtime.PortalRuntimeException: Failed in WD JNDI lookup. javax.naming.NameNotFoundException: No child found in WebDynproContext with name base

  • Error in Create Travel Request

    Good Morning.
    I am implementing Travel for ESS. But in the moment of give clic in the service for Create Travel Request the system display the following error:
    [Error Travel ESS|http://www.freeimagehosting.net/uploads/46ed778b99.jpg]
    What is cause of this error?
    Kind Regards

    Hi Sergio
    I check and the User is not expired.
    I found the following suggestion.
    I asume that you are using a "Basic Authentication" method, if this is your case, you should configure the SICF service with the following parametters:
    1) Go to SICF, /yourservice / double click
    2) On the "Logon Data" tab, in the "Procedure" option choose "Alternative Logon Procedure".
    3) On the same tab, at the "Logon procedure option", delete the SSO option, and change the Number of the another methods, raised the "Basic Authentication" to the first place.
    4) Go to Error pages tab, flag "System logon", and after that click over Configuration, here check "Do no display warnings"
    The question is:
    This is necessary?
    Kind Regards

  • TRIP END DATE greyed out while creating Travel Request IN SAP ESS Portal

    Dear Friends,
                               I am trying to create a Travel Request from my ESS Portal,when I am entering the trip details as follows:
    General Trip Data  (header)
    Start: *    (Have to enter trip date)
    End:        (greyed out)   **** problem with this field
    First Destination:  Country/Region:     open field
    Reason for Trip:    open field
    Activity:     open field
    Estimated Cost:
    Previous Step  Review     Exit  (these are all tabs)
    The problem is that the END DATE is greyed out ,how do we enable it,is it a configuration setting or some code change in the function module
    PTRA_UTIL_GENERAL_DATA_FIELDS
    My portal consultant said that this FM is called in the backround R/3....please let me know ure views on this...
    Thanks,
    Best Regards,
    Karthik

    Hi Kartik,
    We are getting the same problem. Can you please share how did you solve this.  It is urgently required.
    Thanks,
    Vishal Patel

  • Error while creating creditmemo request with reference to invoice

    HI aLL,
    I am facing one issue while creating a credit memo request in VA01 with reference to invoice.
    Our project stock is valuated stock.In projects we always use valuated stock so i cannot change the valuated into non valuated.
    When we try top copy the error pops up" Valuated project stock not allowed with customer stock." and the line item is not copied in the credit memo.
    Diagnosis:The entered wbs manages a valuated project stock,at the same time sales order stock is maintained on sales order line item.this combo is not allowed as different valuation methods within a project is not allowed.
    Tarun Kapur

    Hi Arun,
    Have you check & maintained middleware setting for  document transfer
    (tcode R3AC1). Check object SALESDOCUMENT and try maintain transaction
    type there. Don't forget to activate use tcode R3AS.
    hope this helps.
    Gun

  • Error while creating billing request thr tcode DP91

    hi,
    while creating a billing request through dp91 we are getting an error mesage : "Error during material determination for sales document item 40000067/000020". i have checked the material determination for the material, but there is no material determination maitained for the material, the material here is a service material, after creating a contract we are trying to create a billing request through DP91. this is where wer are getting the error message.

    Hi,
    It looks like the DIP Processor cannot determine a material.Go you your DIP Profile and check the Material Determination settings
    Also run TCode ODP2 to check the consistency of your DIP Profile and also chk Material Origin field was not checked in the Costing tab of the material master.
    Check above and revert back.
    Regards
    Ashu

  • Error while displaying Travel request form (ABAP WD :FITV_TRIP_FORM )

    Hi
    When I am trying to create a travel request form , and then trying to display form its throwing an error
    "The following error text was processed in the system ECD : Error in module RSQL of the database interface".
    The error occurred on the application server mtserpdev_ECD_00 and in the work process 0 .
    Kindly suggest as form "FITV_TRIP_FORM" is already attached via feature . Am I missing some config or
    Is it a issue of patch. (Currently we are at EHP 4 , and all the applications inlcuding FITV_TRIP_FORM are on WD ABAP).
    Thanks
    Abhay

    Have you done the TRVFE feature configuration and made sure if this form exists in the system.
    Regards,
    Divya

  • Error when creating Travel request

    Hi all,
        I am encountering error "Percentage is too high" when creating a travel request. When i tried to change the cost centre to split into different entries.
    Ex: 1) 10 %   cost centre1
          2) 40%    cost centre2
          3) 50%    cost centre2
    when i try to save the request i encountered error with "Percentage 90% is too high" as the first entry is reverting back to the initial entry before modification(initial entry is 100% with cost centre1) it is reverting back the first entry as 1) 100 %   cost centre1 that means now the entries are becoming
    Ex: 1) 100 %   cost centre1
          2) 40%    cost centre2
          3) 50%    cost centre2
       altogether 190% so throwing an error with "Percentage 90% is too high" as the total percentage is more than 100%.
    Can you please help in resolving this issue.

    hi,
    see this link
    Percentage Overhead Rates are not capture with Transport request
    refer this link to know how to create travel reaquest
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/46/51f0e994b85e40e10000000a11466f/content.htm
    http://help.sap.com/saphelp_45b/helpdata/en/b6/cdaab649e911d189060000e8322f96/frameset.htm
    thanks

  • Error While Creating New Field thru EEWB

    Hello CRM Experts,
    I have found following Error while adding New Fields through EEWB. Can any one help to analyse and give the solution?
    It gives Error Log as-      System type OLTP with role DEV is not specified correctly. System type OLTP with role DEV is not specified correctly
    Thanks for your reply in advance.

    Hi Priya,
    We are also facing similar error in EEWB. If you have solved this problem, please update thread.
    Thanks
    Dhanraj

  • Error while create travel expense report - MTR

    Hi all
    I am implementing MTR and as of now I am able to successfully sync the data to the client. Now when I try creating a trip in the client (offline) the following error occurs
    At the travel expense create process "Enter Genera Data" page, there is an input field for mileage, the unit for this is shown as "km" and if I try giving some value in it, it throws the following java exception.
    java.lang.NumberFormatException: empty String
         at sun.misc.FloatingDecimal.readJavaFormatString(Unknown Source)
         at java.lang.Float.parseFloat(Unknown Source)
         at com.sap.mbs.mttcore.util.NFHelper.localizedStringToFloat(Unknown Source)
         at com.sap.mbs.mtr.common.AbstractValidation.extractDecimal(Unknown Source)
         at com.sap.mbs.mtr.common.AbstractValidation.validateFieldLength(Unknown Source)
         at com.sap.mbs.mtr.common.AbstractValidation.validateAllFieldLengths(Unknown Source)
         at com.sap.mbs.mtr.common.AbstractValidation.validateAllFieldLengths(Unknown Source)
         at com.sap.mbs.mtr.mile.process.impl.MileValidationImpl.validateSingleMileForNewTrip(Unknown Source)
    Similar kind of error occurs when I give the amount in the "Expense Receipts" page of expenese create process.
    Had any one come across this error, Do I need to do any changes in the configuration?? Please clarify
    Thanks
    Raj

    Nadia
    Really, I was wondering whether should I keep hands on the java code.  Any ways below are the errors I face when I try to create a trip.
    1) In the "Enter General Data" the step1, the Mileage part it shows as km should be mi. When I try to input any number in there the following error occurs
    empty String - More details
    Component:: trip
    View:: com.sap.mbs.mtr.trip.control.impl.EnterGeneralDataController
    Event:: onNextStep
    Code:: Unknown Error
    java.lang.NumberFormatException: empty String
         at java.lang.FloatingDecimal.readJavaFormatString(FloatingDecimal.java:983)
         at java.lang.Float.parseFloat(Float.java:222)
         at com.sap.mbs.mttcore.util.NFHelper.localizedStringToFloat(Unknown Source)
         at com.sap.mbs.mtr.common.AbstractValidation.extractDecimal(AbstractValidation.java:227)
         at com.sap.mbs.mtr.common.AbstractValidation.validateFieldLength(AbstractValidation.java:191)
         at com.sap.mbs.mtr.common.AbstractValidation.validateAllFieldLengths(AbstractValidation.java:177)
         at com.sap.mbs.mtr.common.AbstractValidation.validateAllFieldLengths(AbstractValidation.java:152)
         at com.sap.mbs.mtr.mile.process.impl.MileValidationImpl.validateSingleMileForNewTrip(MileValidationImpl.java:307)
         at com.sap.mbs.mtr.mile.process.impl.MileProcessImpl.validateMileForTripGeneralData(MileProcessImpl.java:242)
         at com.sap.mbs.mtr.trip.control.impl.EnterGeneralDataController.validateMile(EnterGeneralDataController.java:1136)
         at com.sap.mbs.mtr.trip.control.impl.EnterGeneralDataController.bindAndValidateMile(EnterGeneralDataController.java:931)
         at com.sap.mbs.mtr.trip.control.impl.EnterGeneralDataController.bindAndValidate(EnterGeneralDataController.java:886)
         at com.sap.mbs.mtr.trip.control.impl.EnterGeneralDataController.onNextStep(EnterGeneralDataController.java:811)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.mbs.core.control.AbstractViewController.process(Unknown Source)
         at com.sap.mbs.core.control.DefaultStateMachine.process(Unknown Source)
         at com.sap.mbs.core.web.FrontServlet.doHandleEvent(Unknown Source)
         at com.sap.mbs.mtt.application.web.FrontServletImpl.doHandleEvent(Unknown Source)
         at com.sap.ip.me.api.runtime.jsp.AbstractMEHttpServlet.doGetNotThreadSafe(AbstractMEHttpServlet.java:347)
         at com.sap.ip.me.api.runtime.jsp.AbstractMEHttpServlet.doGet(AbstractMEHttpServlet.java:689)
         at com.sap.ip.me.api.runtime.jsp.AbstractMEHttpServlet.doPost(AbstractMEHttpServlet.java:706)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at com.sap.ip.me.api.runtime.jsp.AbstractMEHttpServlet.service(AbstractMEHttpServlet.java:313)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at org.apache.tomcat.core.ServletWrapper.doService(ServletWrapper.java:405)
         at org.apache.tomcat.core.Handler.service(Handler.java:287)
         at org.apache.tomcat.core.ServletWrapper.service(ServletWrapper.java:372)
         at org.apache.tomcat.core.ContextManager.internalService(ContextManager.java:806)
         at org.apache.tomcat.core.ContextManager.service(ContextManager.java:752)
         at org.apache.tomcat.service.http.HttpConnectionHandler.processConnection(HttpConnectionHandler.java:213)
         at org.apache.tomcat.service.TcpWorkerThread.runIt(PoolTcpEndpoint.java:416)
         at org.apache.tomcat.util.ThreadPool$ControlRunnable.run(ThreadPool.java:501)
         at java.lang.Thread.run(Thread.java:534)
    2) In the same page when I tried to do "Change Cost Assignment" Similar error occurs but at a different Java Class.
    empty String - More details
    Component:: trip
    View:: com.sap.mbs.mtr.trip.control.impl.CostAssignmentViewController
    Event:: onNextEntry_Cost
    SAME ERROR
    3) The 2nd page of the process, "Record Expense Receipt", when I give some value in the Receipt Amount Field, It gives the similar error
    empty String - More details
    Component:: receipt
    View:: com.sap.mbs.mtr.receipt.control.impl.ReceiptListController
    Event:: onNextEntry
    4) Also I am not able to see the Estimates (Estimate Airfare, Estimate .....) in the drop down for Expense Type in the 2nd Page "Record Expense Receipt".
    Thanks
    Raj

  • Error while Creating a request to assign PD profile

    Hello Experts,
    I am trying to create a Change request to assign only the PD profile to the user .
    However when i submit the request i get an error message "Select at least one role".
    I am not sure is it mandatory to select any role even when you just wish to assign the PD profile.
    For Auto Provisioning by system  i have provisioning type as Combined provisioning type as position.
    I am currently on GRC 5.3 SP16.
    Regards,
    Pranab Singh

    now its working fine. iam getting that error due to odbc connection.now i checked callinterface then it will working fine.
    thnks for your reply

  • Run time Error while Creating Expense request

    Dear Friends ,
    In   E-Payment ( Expense  Claim )   creation , While clicking on Enter Receipts application is going to run time error for only one user.    
    Run time Error Info :
    Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED
    Exception              CX_SY_REF_IS_INITIAL
    Short text
         Access via 'NULL' object reference not possible.
    What happened?
         Error in the ABAP Application Program
         The current ABAP program "CL_WDR_P13N_UTILITIES=========CP" had to be
          terminated because it has
         come across a statement that unfortunately cannot be executed.
    Error analysis  
        An exception occurred that is explained in detail below.
       The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
        caught in
       procedure "PRESET" "(METHOD)", nor was it propagated by a RAISING clause.
       Since the caller of the procedure could not have anticipated that the
       exception would occur, the current program is terminated.
       The reason for the exception is:
       You attempted to use a 'NULL' object reference (points to 'nothing')
       access a component (variable: "LR_CONTEXT_ELEMENT").
       An object reference must point to an object (an instance of a class)
       before it can be used to access components.
       Either the reference was never set or it was set to 'NULL' using the
       CLEAR statement.
    How to correct the error 
         Probably the only way to eliminate the error is to correct the program.
       If the error occures in a non-modified SAP program, you may be able to
       find an interim solution in an SAP Note.
       If you have access to SAP Notes, carry out a search with the following
       keywords:
       "OBJECTS_OBJREF_NOT_ASSIGNED" "CX_SY_REF_IS_INITIAL"
       "CL_WDR_P13N_UTILITIES=========CP" or "CL_WDR_P13N_UTILITIES=========CM002"
       "PRESET"
    Information on where terminated
        Termination occurred in the ABAP program "CL_WDR_P13N_UTILITIES=========CP" -
         in "PRESET".
        The main program was "SAPMHTTP ".
        In the source code you have the termination point in line 60
        of the (Include) program "CL_WDR_P13N_UTILITIES=========CM002".
        The termination is caused because exception "CX_SY_REF_IS_INITIAL" occurred in
        procedure "PRESET" "(METHOD)", but it was neither handled locally nor declared
        in the RAISING clause of its signature.
        The procedure is in program "CL_WDR_P13N_UTILITIES=========CP "; its source
         code begins in line
        1 of the (Include program "CL_WDR_P13N_UTILITIES=========CM002 ".
    Regards,
    Suresh .

    Hi Agrawal
    As you are getting run-time error after entering the sold to party and material and the error is in SAPLV61Z ,
    close the session for sometime and open again and then create sales order and then enter sold to party and material and then check wheather you are getting or not. If you are still facing the problem then take the help of the ABAP & BASIS consultant's.
    Regards
    Srinath

Maybe you are looking for