Error while creation of data source

hi
iam creating generic data source using function module.
i inserted the function module and structure name,
when i press the save button, it is throwingerror message as Units field WAERS for field ANSWT of DataSource ZEQUIP_DS is hidden.
please guide me how can i overcome this
treat this is as urjent requirement
regards
kumar

Hi Anil
ANSWT needs Units which is a mandatory field for a datasource, in the extraction structure itself so you should insert WAERS and assign it to ANSWT, this will solve the problem when you save the datasource in RSO2.
Hope it helps
Regards
Rahul

Similar Messages

Error while deleting the Data Source

Hi gurus,
I am getting an error while deleting a Data Source - "Source system XXXXX not found RSAR205".
but that source system no more available.
Is there any way to delete the Data Source.
Thanks in advance.
CK.

Hi,
That source system deleted.
Using RSDS also same error.
Thanks,
CK
Edited by: CK on Oct 3, 2008 11:37 AM

Error While Activating the Data Source in RSA5 T-Code

Hi,
When i tried to inactive the data source in 2lis_11_vahdr it shows "Data Source does not exists errror".
So i went to RSA5 T-Code and tried to activate the data source but there it is throwing the error like "Event with errors Extract in Data Source 2LIS_11_VAHDR".
I have checked the above thing with all the data sources every one are throwing the same errors. Can any one please suggest me how to solve the issue.
Or Is this issue related to Basis People?.
Regards,
Kumar.

Hi Ravi,
1.When i tried to inactive the data source in LBWE T-Code the error is "Data Source 2lis_11_vahdr does not exists ".
2. In RSA5 T-Code while activating the data source the error is "Event with errors Extract in Data Source 2LIS_11_VAHDR".
Regards,
Kumar.

Language error while loading master data source for text

Hi,
We are getting the following error while loading the data in 0DISTR_CHAN_TEXT data source.
"Error during multibyte alignment for language D (position 2)".
Can we filter the data on the Language ( ='EN'). At the data source level LANGU field is marked for selection but still it is not available as filter at info package level.
Thanks
VV

Hey Vishal,
If the field is marked for Selection at data source level, then it must be available for selection in infopackage.
Try checking in RSA3 and see if it is available for selection over there. Let us know what was the output in R/3.
Regards,
Anjum.

Error while activating the data source.

Dear all,
We are using the BI version 7.00 - i have a problem i.e., while creating the infopackage for the data source
0PM_OM_OPA_2 the following error is displayed.
"No active transfer rule for DS 0PM_OM_OPA_2 and ....source system CLNTDEV400; create first..."
Moreover the data source is found to be in version "M" - while activating the same when in click on the display/change icon , the following error is popped up.
"You can only edit 3.x DataSources using transfer rule
maintenance Do you want to create the transfer rules now?"
What could be the reason for this error. What are the things that are to be done to replicate the data and pull data?
Valid experts comment is expected in this regard.
Regards,
M.M

Hi Magesh,
Replicate your data source in BW and then right click onit and choose Assign Info source, it may take you to BC wherein you may need to install the Transfer Rules and related info objects etc.... Once you maintain this data source in the source system then you can create an info pack withput any extra effort.
Hope it helps..

Error while changing UME data Source of EP.

Hi All,
I am trying to change the UM Congifuration for my EP.
Currently EP is using ECC System as UME data source, Now I am trying to change it from ECC to SCM.
For that I have done SSO between EP and SCM, also I have created SAPJSF id on SCM with roles
SAP_BC_JSF_COMMUNICATION, SAP_BC_JSF_COMMUNICATION_RO, SAP_BC_USR_CUA_CLIENT_RFC and maintained same id on EP under Um Configuration- SAP System.
After doing this while checking the test connection it is giving me following error.
(System ID): com.sap.mw.jco.JCO$Exception: (101) RFC_ERROR_PROGRAM: 'mshost' missing
(System ID & System Number): com.sap.mw.jco.JCO$Exception: (102)
RFC_ERROR_COMMUNICATION: Connect from SAP gateway to RFC server failed
Connect_PM TYPE=A ASHOST=mmscmsaptst SYSNR=00
GWHOST=mmscmsaptst GWSERV=sapgw00 PCS=1
LOCATION SAP-Gateway on host mmscmsaptst / sapgw00
ERROR Return codes ( function=STIAsRcvFromGw / CPIC-RC=CM_PARAMETER_ERROR / SAP-RC=C_NIHOSTTOADDR )
TIME Tue Sep 23 10:55:04 2008 RELEASE 640 COMPONENT CPIC (TCP/IP) with Unicode VERSION 3
RC 772 MODULE r3cpic.c LINE 5079 COUNTER 2
Pl help to resolve above issue.
Thanks & Regards,
Aditya

Aditya,
This RFC error is encountered when there is no message server host name in this file.
C:/windows/system32/drivers/etc/services
make an entry like this sapmsPBI 3600/tcp
3600 is the port number , try to figure out the correct port number for SCM and update this.
These changes are to be done on your Portal side.
Good Luck.
Sandeep Tudumu
Edited by: Sandeep Tudumu on Sep 23, 2008 11:17 AM

Error while activating Transactional data source

I am facing the below error while activating the transactional data source.
Field Revenue ( Position 7 ): Amount Field in Internal Format, Check Settings.
Can nyone plz let me know.

Hi Reddy,
You might have created the Revenue field Currency as "Fixed Currency" like INR or USD.
In the Datasouce Def - Fields tab you have Internal format for a field then you should have the reference field to specify the external format like 0currency.
In your case you have not taken any reference field 0currency. So you should n't specify the revenue field in Internal format,
As Shashank said, Please change it to External format and Activate the DS.
Thanks
Sreekanth.

DYNPRO_SENT_IN_BACKGROUND Error while transporting XI data source

Hi Experts,
We are having an issue in in transporting XI data source in BI from Dev to Test. The error is geenrated during post handling of the transport, possibly while the data source is bing activated. Teh ST22 dump gives the DYNPRO_SEND_IN_BACKGROUND error. Following informaiton is available in the User Information section of ST22 dump.
Call Program........."CL_RSDS_WEBSERVICE============CP"
Function Module..... "RSDS_WS_WEBS_GENERATE"
Information on where terminated
    Termination occurred in the ABAP program "SAPLSTRD" - in "SYSTEM-EXIT".
    The main program was "SAPMSSY1 ".
    In the source code you have the termination point in line 0
    of the (Include) program " ".
Please give us your advice on how to nail down this issue.

Hi,
Check if your data source extract structure is having all 40 fields.
Save and generate the data source again, replicate and then transport.
I hope it will help.
Thanks,
S

Error while testing Generic Data Source extraction

I've created generic data source for Texts and Attributes in R/3 based on VIEW (Z table)
I get error "Error 6 in function module RSS_PROGRAM_GENERATE" while trying to test the data sources through RSO2
I guess there can be a lot of reasons... Please name me anybody who knows them...
thanx in advance

Hi,
Please Check the OSS note 328948 and it provides solution to same error what you have. Additionally you can have a look into this OSS note 705212 too.
Syntax error in the generated extraction program Symptom
You notice the error by one of the following symptoms:
The loading of transaction data from an R/3 system terminates with a syntax error in the generated extraction program. The monitor displays the error messages:
R3027 "Error & during the generation of the data transfer program"
RSM340 "Error in the source system"
The extraction within the extractor checker terminates with error message RJ028 "Error 6 in function module RSS_PROGRAM_GENERATE".The activation of transfer rules ends in BW with error message RG102 "Syntax error in GP$ERR$, row... (-> long text)" from the source system. Usually, the diagnosis in the long text of the error message is: "...could not be interpreted. Possible error causes: Incorrect notation or... "
Other terms
OLTP, extractor, data extraction, DataSource, Service API, SAPI,
R3 027, R3 27, RSM 340, RJ 028, RJ 28
Reason and Prerequisites
The error only occurs in the source system, if this contains Basis Release 3.1I and Service API (SAPI) 3.0C Support Package 6. SAPI 3.0C Support Package 6 is contained, for example, in PI 2003.1 Support Package 7 (see attached composite SAP note 673002).
Solution
To correct the problem you need service API 3.0C Support Package 7 in the affected source system. The attached composite SAP note 704971 explains in which software components service API 3.0C is contained, and what the corresponding Support Packages of these components are.
Alternatively, you can also copy the advance correction from the appendix.
Hope it helps.
Regards

Error while creating the data source

hi
iam creating generic data source using function module.
i inserted the function module and structure name,
when i press the save button, it is throwingerror message as Units field WAERS for field ANSWT of DataSource ZEQUIP_DS is hidden.
please guide me how can i overcome this
treat this is as urjent requirement
regards
kumar

The error message is explicit the WAERS field is hidden...you must edit the datasource structure in RSO2 and uncheck the "hidden" checkbox for that field....
It will solve your problem...
Regards

Error while creating Generic data source using FM

Hi Experts,
I try to create a generic data source using the Function Module via the transaction RSO2. I got the following error messages.
" Das Einheitenfeld CURR des Feldes ZPKZA1 der DataSource ZBWN_DS_POLPOSP ist ausgeblendet"
" Das Einheitenfeld CURR des Feldes ZPKZA2 der DataSource ZBWN_DS_POLPOSP ist ausgeblendet"
" Das Einheitenfeld CURR des Feldes ZPKZA10 der DataSource ZBWN_DS_POLPOSP ist ausgeblendet"
"The unit field CURR of the field ZPKZA1 of the DATA SOURCE ZBWN_DS_POLPOSP is not visible/ stopped/ hide".
for all 10 fields of type CURR.
How shall i handle this issue..........any suggestions please........
thanks in advance
cheers
sailekha

Hi,
Are your CURR fields refereded to a currency field of your structure?? Maybe the problem is that the field containing the currency is refered to other table/structure and it has to be one of your structure fields.
Hope this helps,
Regards,
Carlos.

Error while tansporting the Data Source & Transformation

Dear Experts,
I stuck in one problem. I just tried to transport one data source & its transformation fron BWD to BWQ. After importing the request, it throws an error (mentioned below):
Start of the after-import method RS_RSDS_AFTER_IMPORT for object type(s) RSDS (Activation Mode)
Password logon no longer possible - too many failed attempts
Error when activating DataSource ZMAT_MAPVL RQ1CLNT400
Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
No rule exists
Source RSDS ZMAT_MAPVL RQ1CLNT400 does not exist
Also i check the same data source on R/3 system where it is available in activated form. I also replicate the same & tried to transport it again on BWQ but still the same.
Please help me out.
Thanks in advance
Neha

Hi,
Did you check the 'Conversion of logical system names' option?, whether your source is mapped to correct R3 system?. If not please check and map with the correct R/3 Quality system and sometimes there may be more than one R/3 system connected to quality, if so remove the wrong one.
For Password logon no longer possible, please check your RFC connection(SM59) by selecting the option Remote logon, it shd give you the error. As background user got locked it seems. Please check.
Thanks,
V.Senthil
Edited by: Senthilkumar Viswanathan on May 10, 2011 7:21 AM

Error while Replicating the Data Source in Quality System....

Dear Expert,
I have created a generic data source in R/3 Dev system and I replicated the data source to BW DEV system. Everything is fine in DEV system.
I have transported the Data Source to R/3 Quality System. And transported the related objects in BW DEV system to BW QUALITY system.
Now I am getting the error as follows :
BW QUA System --> RSA1 --> Source System --> Data source Overview --> Sales & Distribution --> _REPLICATE_
*DATASOURCE*.( clicked )
Its moving to another screen (R/3 QUALITY) , but it is coming as a LOGIN screen. Its askong for the USER name and Password. And when I click on BACK button , its givin following pop-up
RFC connection to source system LOGSYS is damaged ==> no Metadata upload
What could be the issue ?? Please suggest.
Thanks,
Sanjana

Hi saveen,
Yes I transported in that manner.
I checked in Source System ( RSA13):
Its giveng the pop-up ,
RFC connection check failed. Check connection
Please suggest, how can I proceed ?
Thanks,
Sanjana

Error While Transporting export Data Source

Hi Experts,
We have a requirement to transport a data source from development to quality system through acceptance box.
We need to transport an export data source which contains 40 fields. But when I captured the data source in development system and transported the same to acceptance box it's displaying only 38 fields. 2 Fields are missing from the data source which are present in development system and also source system of export data source.
Please suggest how to get these 2 fields in acceptance box.
Thanks,
Sachin Motgi

Hi,
Check if your data source extract structure is having all 40 fields.
Save and generate the data source again, replicate and then transport.
I hope it will help.
Thanks,
S

Getting error while creating XML data source

Hi,
I have converted access database into xml and now wants to convert the xml file into oracle database.while creating the xml database resource geting error ora-065550.PLS-00103:Encountered the symbol"Push" when expecting one of the following .(),*etc.
Why this problem I am facing.
Any Idea
Thanks in advace....

The error message is explicit the WAERS field is hidden...you must edit the datasource structure in RSO2 and uncheck the "hidden" checkbox for that field....
It will solve your problem...
Regards

Error while creation of data source

Similar Messages

Maybe you are looking for