Error while defining alt unit of measurement in material master
All SAP gurus,
i am trying to define a alt unit of measurement in a finished material, the base unit of measurement is in MT, and the sales unit is nos. the conversion formula is 53 nos = 1kg i.e. 1MT = 53000 nos. as conversion can be done only with base unit of measurement i am giving 53000 nos = 1 MT, but system unable to calculate the conversion as it is not taking mere than 3 digit after decimal.
e.g. if 53000 nos = 1 MT
then 1 nos should be = 0.000018 MT
but system not taking this value as this value contain 6 digit after decimal
suggest me what can be the way out? with detailed steps. can i increase the post decimal value or i have to define another middle alt unit of measurement (like KG). and if that is to be done then how.
Regards
BKR
Hi,
With help of Basis team check the decimal places for u r user ID.
In t-code SU01 >>> Under Default tab
Kapil
Similar Messages
-
Error while creating PO -- Unit of measure not defined for lanuage ZH
Hi all,
i have created the PR with EA as UOM. Then while creating PO, i am getting error like
' Unit of measure not defined for lanuage ZH' .
Then I execute CUNI
Then menu is GOTO > Translation > units of measure
enter source language and target language . After this i am getting the below message
---> Language not available on server
Please suggest what i should do. Thanks.
Thanks
pabiHI Pabi,
Go to material master for material in purchase requisition, the Go to Additional data and maintained language as ZH in material master data.
Also the other possibility, that if in your case purchase requisition are converted to purchase orders through background jobs,
then check the background job execution in SM37 whether that background job has been triggered twice parellely in the background, which could have resulted in locking of same purchase requisition at same time and hence your are getting the Error.
Br,
Tushar -
Unit of Measure in material master
Hi
I have a Raw material consider (Forging) for which material master is maintained "PC" as Base unit of Measure. I have defined in Additional Unit of Measure as 500 KG = 1 PC. Also my order unit is also maintained as PC.
Here when they procure castings they order it as 1 PC only. But when the actual material comes there may be some variation in weight. The client wants to make payment on actual weight basis only .
Also stock keeping unit and issue of material is done as PC only.
Please guide me how to address this issue.
Regards
Kumar.Hi
With the existing master data you can acheive your requirement.You can maintain the price in info record in Kgs or in PO Item conditions tab you can maintain the price per kg.
while doing the miro please enter the actual quantity in<b> Qty in PO price unit</b> in Quantity tab ans save the GR.When you do MIRO, system will propose Qty as 1PC and value as <b>Qty in PO price unit X Price per kg</b> maintained in PO.Please try this solution.
Regards
Ramakrishna -
Changing Base Unit Of Measure in Material Master
Dear All,
We need to change the base unit of measure of certain materials who have been assigned inspection plan. We have deleted the material from Inspection Plan and later even the plan. But still the system not allowing to change the BASE UNIT OF MEASURE. The error thrown by the system is : Material is assigned to inspection Plan.
Please guide in this regard as changing the material for us will be a very cumbersome act.
RegardsHi Rohan,
Please check 'display errors' in MM02 when you are trying to change the BUoM. It will say what prevents you from doing that.
Please check:
http://www.sap-img.com/materials/change-base-unit-of-measure.htm
BR
Csaba -
Met problem to change unit of measure in material master
Our prime made mistake when creating material master with MM01. He used wrong unit of measure EA instead of right one M. And when he recognized this issue and tried to change it with MM02 in view Basic1, system prompt him an error message that "Standard cost estimates for the current period already exist".
So, please help to let me know how can I delete related records about cost estimates and avoid this error. Thanks a lot.Robbie,
You can delete Cost estimates using T-code: CKR1 , I am not sure if you can change UoM if you have any goods movements on the material. The best option would be create new material with correct UoM and transfer stock from old Material to New one with proper Conversion.
Thanks
Sivaram -
Unit of measure in Material Master after PO's created
Hello Everyone,
I know that we can't change the material measure unit once PO's and other documents are created.
What can I do with the PO so i can change the material measure unit?
Thanks in Advance.From OSS note 138767
Within the material master record maintenance, you want to change the base unit of measure (base unit). During the change, the system performs extensive checks in order to avoid inconsistencies in the applications which use the material master.
In particular, the following checks are performed:
The base unit must not be defined as an alternative unit of measure for the material
No International Article Number must be assigned to the base unit
No proportion/product units must be defined for the material
No configurable material must be assigned
The material must not be used as a configurable material
Stock must neither exist for the previous period nor for the current period
No physical inventory must be active
No reservations or dependent requirements must exist for which the deletion indicator is not set
No planned orders must exist
No purchase requisitions, purchase orders or scheduling agreements must exist for which the deletion indicator is not set
No WM transfer requirements, no WM quants or no WM posting change notices must exist
The material must not be a bill of material
The material must not be contained in a bill of material
The material must not be used as a production resource/tool
The material must not be used in task lists
No standard cost estimate must exist for the current or future period
No production orders must exist
No planned independent requirements must exist
No run schedule headers must exist
If the base unit has dimensions, no serial number profile must be assigned
No sales and distribution documents must exist which have status Not processed or Partially processed.
Solution
If necessary, all reasons mentioned above must be eliminated by archiving the objects listed. -
Changing the Unit of Measurement in Material Master
Dear Experts,
Material DF21DENG (fert) was created with KGS (kilogram per second) as its unit of measurement. A material BOM was now created for DF21DENG.
I intend to change the unit of DF21DENG from KGS to KG (kilogram). On doing this in the Basic data view of DF21DENG, i get the message " change is not possible because a BOM exists for this material".
In the BOM of DF21DENG, I set the deletion flag on & tried to change the unit in the Material master again but got the same massage.
Please how can I effect this change?This response was helpful but was solved the problem was that; from the Edit, i selected Delete from the drop down & then the alternative BOM was deleted.
-
Unit of Measurement in Material Master
Hello Experts...
I have an intresting issue on Unit of Measurement. I would like to maintain alternative unit of measurement as per below..
1 EA = 1 EA
1 ROLL = 5000 EA
1 CT = 150,000 EA
However the field UMREZ length in the material master allows me to enter upto 5 digits...and also it is not possible to enter decimal digits here.
Have any one of you faced this kind of issue, if any one faced what would be the solution for this...?
Look forward to hearing from you..
Cheers
Umakanth..Hi Umakanth,
For increasing the numerator for conversion of base unit of measure, UMREZ would be appending the structure SMEINH by requesting Access Key from SAP.
Even though its not a suggestible decision to append standard SAP structure , if the requirement demands we may need to do that.
Cheers!
Sudhakar Reddy -
Update info record when changing units of measure in material master
Hello,
is there any possibility for an automatic change of info record when changing conversion factors in the material master ?
We have 3 units of measure in our material master: the base unit and 2 alternative units. The first alternative unit is the order unit and the second alternative unit is the order price unit. So in our purchase info records we maintain an order unit, which differs from the base unit and we also maintain an order price unit, which differs from the base unit and the order unit.
If we now change the conversion factors between the units in the material master, we would like to get an automatic change of the converions in the info record (to order unit and order price unit), which have the same previous conversions.
For IS R it seems to be implemented (see OSS-Note 975954).
Is there any solution for a "normal" industry system ?
Thanks for answering
Edited by: Britta Heinsen on Jul 23, 2009 1:52 PMI don't think such an auto update is available. Infact I came to know that such an update is available in IS-R after reading your query.
Obviously you an always create a workflow based enhancement that can synchronize the Info-records and material master changes or sort of enhancement which regularly reads the material master change history for such changes and trigger a synchronization by executing change Info-record automatically. -
Report for Units of measurement for Material
Hi
Is there any report to extract the alterante unit of measurements for materials in a plant.
ThanksHi,
Please use the below table,
Related to Materials:
MARA - Material Master: General data
MAKT - Material Master: Description
*MARM - Material Master: Unit of Measure*
MAPE - Material master: Export control file
MARC - Material master: Plant data
MARD - Material master: Storage location
MAST - Material link to BOM
MBEW - Material valuation
MLGN u2013 Material Master: WM Inventory
MLGT u2013 Material Master: WM Inventory type
MDIP - Material: MRP profiles (field contents)
MKOP - Consignment price segment (old versions of SAP)
EBEW - Valuation of sales order stock
QBEW - Valuation of project stock
MVER u2013 Material Master: Consumption <Plant>
DVER u2013 Material Master: Consumption <MRP Area>
MVKE u2013 Material Master: Sales <Sales Org, Distr Ch>
MLAN - Material Master: Tax indicator
MARC - Material Master: Plant data
MAPR u2013 Material Master: Forecast
MARD u2013 Material Master: Storage Location
MCH1 u2013 Material Master: X Plant Batches
MCHA u2013 Material Master: Batches
MCHB u2013 Material Master: Batch Stock
MDMA - MRP Area data
DBVM - MRP Planning File Entry: MRP Area
MOFF - Outstanding Material Master Records (Maintenance status)
MARCH - Material Master C Segment: History
MARDH - Material Master Storage Location Segment: History
MBEWH - Material Valuation: History
MCHBH - Batch Stocks: History
MKOLH - Special Stocks from Vendor: History
MSCAH - Sales Order Stock at Vendor: History
MSKAH - Sales Order Stock: History
MSKUH - Special Stocks at Customer: History
MSLBH - Special Stocks at Vendor: History
MSPRH - Project Stock: History
MSSAH - Total Sales Order Stocks: History
MSSQH - Total Project Stocks: History
Regards,
Mohd Ali. -
Error while changing base unit of measurere
Dear
i hav prob. while changing base unit of measure system gives error massage is material used in BOM, ECM is activated in our system and that material is showing only when valid from date is not entered othervise that material is not shown in BOM.how to remove that material from so i can change base unit of measure.HI
You can only change the BUM if there is no stock production order planned orders reservations, PO s etc are not in the system there should be no transaction of the material ,after ensuring all this, u can change unit of measure
For more info
check these threads
Base unit of measure cannot be changed
Re: BOM unit of measure
change base unit of measure
Regards
Anupam Sharma -
Error while defining a warehouse as Bonded Store
Hi All
I am getting one error while defining a OPM Warehouse as Bonded Store in OPM Inventory Module under Warehouse Attributes.
The error is 'APP-JA-460778: This Warehouse does not have a Parent Organization defined in Oracle Financials'. Can any one tell me where i missed the setup part of defining a parent organization in Financial Module. We are on OPM 11i EBS.
Thanks in advance
Prem.I think you are using India Localization. Sorry, I don't have any knowledge in that area.
I got following information about how to setup Organization/Warehouse. And it says that any deviation from this may result in error. Check if you are following all the steps required for defining warehouse and organization.
Please ensure that the following setups are done exactly as mentioned below:
1) Create an OPM organization in OPM System Administration using OPM Organization Screen eg. ‘PM1’
2) Create a Location using ‘HR Locations’ form with the same name as the OPM Organization (eg. PM1)
3) Create an Inventory Organization using the form ‘HR Organizations’ with the same Organization Code as the OPM organization Code created in step 1. (Additional Identification details of the Organization could be given after a colon (:) in the Organization Name – Eg. ‘PM1: Vision Process India Mumbai’). Make this Inventory Organization as ‘Process Enabled’ and in the ‘Process Organization’ field, refer to the OPM Organization. Attach the HR Location created in step 2 to this Inventory Organization.
4) On saving the Inventory Organization record, the system shall automatically create a Warehouse with the same name in OPM under the OPM organization. (eg.PM1)
5) Query the Location ‘PM1’ and attach the Inventory Organization ‘PM1’ to it.
6) Go to Organization Additional info in OPM System Admin – Create a record for ‘PM1’.
Enter the EC Code for this Organization, as this is the Excise Licensed Organization. After saving
the record here, an automatic entry is created in India Local Inventory – Organization Additional Information for the Inventory Organization.
7) Go to India Local Inventory Org Additional Info and query for this Organization (it will be visible without location). DO NOT mark this as Master Organization.
8) Add another record for the Organization with Location (eg. PM1)
9) Check the 'Master Org' flag for this combination of Organization and Location.
B: Warehouse :
1) Create an Inventory Organization in India Local Inventory corresponding to the Warehouse in OPM (eg. ‘WSH’). Make this as ‘Process Enabled’ and give the ‘Process Organization’ as the
OPM Organization created earlier (PM1), which is the Process Organization this Warehouse is going to report to.
2) Create location (WSH-With the same name as the Warehouse Code) in India Local Inventory and attach it to organization ‘WSH’ in India Local Inventory
3) System automatically creates Warehouse ‘WSH’ in OPM under the OPM organization (PM1)
4) Using the ‘Warehouse Attributes’ form, classify this Warehouse as Bonded/Trading/OSP
5) Go to India Local Inventory Organization Additional Information form and create a record ‘WSH’ giving the Master Organization as ‘PM1’ (actually this is referring to the combination of PM1 with Location
PM1 as Master Organization) . Add another record for the same Org ‘WSH’ with Location ‘WSH’
with Master Organization as ‘PM1’. Please ensure that the EC Code is exactly same as the Master Organization.
6) Optionally ensure that in the Register Priorities, highest priority (1) is set against PLA.
7) Optionally ensure that Allow Negative PLA Balance Flag is checked.
Also make sure that all objects (triggers, packages etc) that are related to localization are valid. -
Post Author: lkamesam
CA Forum: Integrated Solutions
Hi,
I am running Crystal Reports version 10 from IBM Rational 6.0.1 build 20050725_1800 XML data source. When I try to run the report under WAS 6.0.1 I get the following error:
Does any body have any clue how to resolve my problem? Thanks
Error 500: Error while defining class: com.crystaldecisions.data.xml.CRDB_XMLImpl This error indicates that the class: OCA.OCAdbdll.DbDLLOperations could not be located while defining the class: com.crystaldecisions.data.xml.CRDB_XMLImpl This is often caused by having the class at a higher point in the classloader hierarchy Dumping the current context classloader hierarchy: ==> indicates defining classloader *** indicates classloader where the missing class could have been found ==>[0] com.ibm.ws.classloader.CompoundClassLoader@163dd786 Local ClassPath: C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\classes;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\bobj_platform_jsf.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\cecore.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\celib.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\ceplugins.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\cereports.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\cesession.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\clientlogic.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\Concurrent.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CorbaIDL.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CRDBXMLExternal.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CRDBXMLServer.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalCharting.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalCommon.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalContentModels.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalExporters.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalExportingBase.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalFormulas.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalQueryEngine.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalReportEngine.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalReportingCommon.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\ebus405.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\icu4j.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\jrcerom.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\jsf_common.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\keycodeDecoder.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\log4j.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\MetafileRenderer.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\rasapp.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\rascore.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\rpoifs.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\serialization.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\URIUtil.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\webreporting-jsf.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\webreporting.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\xercesImpl.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\xmlParserAPIs.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent; Delegation Mode: PARENT_FIRST [1] com.ibm.ws.classloader.JarClassLoader@338761606 Local Classpath: Delegation mode: PARENT_FIRST [2] com.ibm.ws.classloader.ProtectionClassLoader@38e75786 [3] com.ibm.ws.bootstrap.ExtClassLoader@7e475784 [4] sun.misc.Launcher$AppClassLoader@7e5a5784 [5] sun.misc.Launcher$ExtClassLoader@7e565784 -Original exception- java.lang.NoClassDefFoundError: OCA/OCAdbdll/DbDLLOperations at java.lang.ClassLoader.defineClass0(Native Method) at java.lang.ClassLoader.defineClass(ClassLoader.java(Compiled Code)) at java.security.SecureClassLoader.defineClass(SecureClassLoader.java(Compiled Code)) at com.ibm.ws.classloader.CompoundClassLoader._defineClass(CompoundClassLoader.java:576) at com.ibm.ws.classloader.CompoundClassLoader.findClass(CompoundClassLoader.java(Compiled Code)) at com.ibm.ws.classloader.CompoundClassLoader.loadClass(CompoundClassLoader.java(Compiled Code)) at java.lang.ClassLoader.loadClass(ClassLoader.java(Compiled Code)) at com.crystaldecisions.reports.queryengine.driver.i.<init>(Unknown Source) at com.crystaldecisions.reports.queryengine.driver.i.case(Unknown Source) at com.crystaldecisions.reports.queryengine.av.ak(Unknown Source) at com.crystaldecisions.reports.queryengine.av.else(Unknown Source) at com.crystaldecisions.reports.queryengine.av.byte(Unknown Source) at com.crystaldecisions.reports.queryengine.av.do(Unknown Source) at com.crystaldecisions.reports.queryengine.as.new(Unknown Source) at com.crystaldecisions.reports.queryengine.at.long(Unknown Source) at com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source) at com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source) at com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source) at com.crystaldecisions.reports.reportdefinition.cy.b(Unknown Source) at com.crystaldecisions.reports.reportdefinition.cy.long(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.o(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.a(Unknown Source) at com.crystaldecisions.reports.common.ab.a(Unknown Source) at com.crystaldecisions.reports.common.ab.if(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.if(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.o(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.a.a(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.a(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.JPEReportSourceFactory.createReportSource(Unknown Source) at com.crystaldecisions.report.web.a.a.K(Unknown Source) at com.crystaldecisions.report.web.event.aa.a(Unknown Source) at com.crystaldecisions.report.web.event.aa.a(Unknown Source) at com.crystaldecisions.report.web.event.bx.a(Unknown Source) at com.crystaldecisions.report.web.event.b1.broadcast(Unknown Source) at com.crystaldecisions.report.web.event.as.a(Unknown Source) at com.crystaldecisions.report.web.WorkflowController.if(Unknown Source) at com.crystaldecisions.report.web.WorkflowController.doLifecycle(Unknown Source) at com.crystaldecisions.report.web.ServerControl.a(Unknown Source) at com.crystaldecisions.report.web.ServerControl.processHttpRequest(Unknown Source) at com.crystaldecisions.report.web.viewer.taglib.ServerControlTag.doEndTag(Unknown Source) at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.doEndTag(Unknown Source) at com.ibm._jsp._sample._jspx_meth_crviewer_viewer_0(_sample.java:135) at com.ibm._jsp._sample._jspService(_sample.java:77) at com.ibm.ws.jsp.runtime.HttpJspBase.service(HttpJspBase.java:88) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1212) at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:629) at com.ibm.wsspi.webcontainer.servlet.GenericServletWrapper.handleRequest(GenericServletWrapper.java:117) at com.ibm.ws.jsp.webcontainerext.JSPExtensionServletWrapper.handleRequest(JSPExtensionServletWrapper.java:171) at com.ibm.ws.jsp.webcontainerext.JSPExtensionProcessor.handleRequest(JSPExtensionProcessor.java:230) at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest(WebApp.java:2837) at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest(WebGroup.java:220) at com.ibm.ws.webcontainer.VirtualHost.handleRequest(VirtualHost.java:204) at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:1681) at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:77) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:421) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:367) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.ready(HttpInboundLink.java:276) at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.sendToDiscriminaters(NewConnectionInitialReadCallback.java:201) at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.complete(NewConnectionInitialReadCallback.java:103) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.requestComplete(WorkQueueManager.java:548) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.attemptIO(WorkQueueManager.java:601) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.workerRun(WorkQueueManager.java:934) at com.ibm.ws.tcp.channel.impl.WorkQueueManager$Worker.run(WorkQueueManager.java:1021) atFor those who would have the same problem, here is how I could eventually fix it.
Since the Flex Test Drive is sometimes out of sync with flash builder 4, I recreated a project using other help pages on Adobe site :
Entry point :
http://help.adobe.com/en_US/Flex/4.0/AccessingData/WSbde04e3d3e6474c4-668f02f4120d422cf08- 7ffd.html
As suggested, I used the New Project wizard to create a new project, with :
Application server type : J2EE
Check the radio button "Use remote object access service : BlazeDS"
Then, as indicated in following pages (section "Accessing BlazeDS")... :
file:///C:/Mes%20documents%20C/Commun/Developpement/Documentation/HT-Tracks/AccessingData/ help.adobe.com/en_US/Flex/4.0/AccessingData/WSbde04e3d3e6474c4-668f02f4120d422cf08-7ffe.ht ml#WSbde04e3d3e6474c4-19a3f0e0122be55e1b7-8000
...I selected the "Data / Connect to Data/Services..." menu option, which started the Data/service connection wizard.
There, I selected a BlazeDS (and not Web Services) service type, and everything went fine.
Suggestion to adobe staff : maybe it would be useful to update the Flex Test Drive to reflect Flash Builder 4 ?
Very nice product anyway, so far, congratulations...
Rgds
Marc. -
Access Sequence - Error while defining it
Hi all,
I am getting the below error while defining a access sequence.
' UNFAVOURABLE SEQUENCE OF FIELDS - POSSIBLE PERFORMANCE PROBLEMS'
Could anyone please help me this..
Thanks,
ArthyHi Hegal,
I followed the basic principle. I was trying to define a new access sequence for the pricing conditions...
But I got the error that i reported earlier. I saved it inspite of the error. The access sequence got created but I am not sure if it will give any errors in my pricing procedure while executing the sales order.
Do you think it is some config error?
Thanks,
Arthy -
Alternate unit of measure for service master
Dear all
I have same service but different unit of measure like hr, day, month, pls explain how make alternative unit of measure in service master?Hello,
I am afraid I must confirm that the system is working in this way...
It is not possible to define an alternative unit of measure in the service master in R/3.
If you want to create a purchase order with another unit of measure, you have to create a seperate service master with this unit of measure.
Thanx & Sorry
Mauro
Maybe you are looking for
-
Migrating from 10g to 11g checklist
Hi, we are migrating from oracle 10.2.0.4.0 to 11g. we have Apex 3.1.2.00.02 installed in 10g.Will migrating to 11g will have any issues in our applications?.i have read that what comes with 11g is apex 3.0. it would be so helpful if you could give a
-
Does anyone know how to make a photo of a video and send to Craig's list? Or maybe send the video to Craig's list? I don't have quick time pro or any other photo softward. Is it worth it to purchase Quick Time Pro? What else could I use that for? Tha
-
How to add a title to button in flash?
Hi, I have a button in flash and a action layer with the following script: button1.addEventListener(MouseEvent.CLICK,clickHandler); function clickHandler(event:MouseEvent):void{ navigateToURL(new URLRequest("http://mortimerhall.99k.org/homepage.htm")
-
Problem with CRMD_ORDER: error messages
Hi, i have a very urgent problem when creating a new sales order..(in crm, but not in the web application) at this moment, when a product's quantity is less than the minimum, i get an error message at the top of the page. What i need is to treat thos
-
Make a simple report using reports builder
Hello Any idea for querying of information into database of EBS I wanna try to make simple reports for our warehouse inventory per month Thanks