Error while defining set of books
Hello to all,
I have created Currency, Calender, Structure and added valuset and values.
the values in the account segment which is asssigned with natual account flexfield qualifier entered as balance sheet items: asset, liability.
Now while creating set of books at the time entering Retained Earning account when clicked on 'OK' button I see the following Error:
"Please choose an existing combination"
??
Thanx a lot,
"..enable "Allow Dynamic insert"..."
works fine
"...you can define a code cobination in GL.."
i cant define code combination before creation of set of books,
or do you mean that i should specify code combination (for Retained earnings) just after creation of set of books?
thanx
Similar Messages
-
Error while defining a warehouse as Bonded Store
Hi All
I am getting one error while defining a OPM Warehouse as Bonded Store in OPM Inventory Module under Warehouse Attributes.
The error is 'APP-JA-460778: This Warehouse does not have a Parent Organization defined in Oracle Financials'. Can any one tell me where i missed the setup part of defining a parent organization in Financial Module. We are on OPM 11i EBS.
Thanks in advance
Prem.I think you are using India Localization. Sorry, I don't have any knowledge in that area.
I got following information about how to setup Organization/Warehouse. And it says that any deviation from this may result in error. Check if you are following all the steps required for defining warehouse and organization.
Please ensure that the following setups are done exactly as mentioned below:
1) Create an OPM organization in OPM System Administration using OPM Organization Screen eg. ‘PM1’
2) Create a Location using ‘HR Locations’ form with the same name as the OPM Organization (eg. PM1)
3) Create an Inventory Organization using the form ‘HR Organizations’ with the same Organization Code as the OPM organization Code created in step 1. (Additional Identification details of the Organization could be given after a colon (:) in the Organization Name – Eg. ‘PM1: Vision Process India Mumbai’). Make this Inventory Organization as ‘Process Enabled’ and in the ‘Process Organization’ field, refer to the OPM Organization. Attach the HR Location created in step 2 to this Inventory Organization.
4) On saving the Inventory Organization record, the system shall automatically create a Warehouse with the same name in OPM under the OPM organization. (eg.PM1)
5) Query the Location ‘PM1’ and attach the Inventory Organization ‘PM1’ to it.
6) Go to Organization Additional info in OPM System Admin – Create a record for ‘PM1’.
Enter the EC Code for this Organization, as this is the Excise Licensed Organization. After saving
the record here, an automatic entry is created in India Local Inventory – Organization Additional Information for the Inventory Organization.
7) Go to India Local Inventory Org Additional Info and query for this Organization (it will be visible without location). DO NOT mark this as Master Organization.
8) Add another record for the Organization with Location (eg. PM1)
9) Check the 'Master Org' flag for this combination of Organization and Location.
B: Warehouse :
1) Create an Inventory Organization in India Local Inventory corresponding to the Warehouse in OPM (eg. ‘WSH’). Make this as ‘Process Enabled’ and give the ‘Process Organization’ as the
OPM Organization created earlier (PM1), which is the Process Organization this Warehouse is going to report to.
2) Create location (WSH-With the same name as the Warehouse Code) in India Local Inventory and attach it to organization ‘WSH’ in India Local Inventory
3) System automatically creates Warehouse ‘WSH’ in OPM under the OPM organization (PM1)
4) Using the ‘Warehouse Attributes’ form, classify this Warehouse as Bonded/Trading/OSP
5) Go to India Local Inventory Organization Additional Information form and create a record ‘WSH’ giving the Master Organization as ‘PM1’ (actually this is referring to the combination of PM1 with Location
PM1 as Master Organization) . Add another record for the same Org ‘WSH’ with Location ‘WSH’
with Master Organization as ‘PM1’. Please ensure that the EC Code is exactly same as the Master Organization.
6) Optionally ensure that in the Register Priorities, highest priority (1) is set against PLA.
7) Optionally ensure that Allow Negative PLA Balance Flag is checked.
Also make sure that all objects (triggers, packages etc) that are related to localization are valid. -
Post Author: lkamesam
CA Forum: Integrated Solutions
Hi,
I am running Crystal Reports version 10 from IBM Rational 6.0.1 build 20050725_1800 XML data source. When I try to run the report under WAS 6.0.1 I get the following error:
Does any body have any clue how to resolve my problem? Thanks
Error 500: Error while defining class: com.crystaldecisions.data.xml.CRDB_XMLImpl This error indicates that the class: OCA.OCAdbdll.DbDLLOperations could not be located while defining the class: com.crystaldecisions.data.xml.CRDB_XMLImpl This is often caused by having the class at a higher point in the classloader hierarchy Dumping the current context classloader hierarchy: ==> indicates defining classloader *** indicates classloader where the missing class could have been found ==>[0] com.ibm.ws.classloader.CompoundClassLoader@163dd786 Local ClassPath: C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\classes;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\bobj_platform_jsf.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\cecore.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\celib.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\ceplugins.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\cereports.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\cesession.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\clientlogic.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\Concurrent.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CorbaIDL.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CRDBXMLExternal.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CRDBXMLServer.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalCharting.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalCommon.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalContentModels.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalExporters.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalExportingBase.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalFormulas.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalQueryEngine.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalReportEngine.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalReportingCommon.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\ebus405.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\icu4j.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\jrcerom.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\jsf_common.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\keycodeDecoder.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\log4j.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\MetafileRenderer.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\rasapp.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\rascore.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\rpoifs.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\serialization.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\URIUtil.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\webreporting-jsf.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\webreporting.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\xercesImpl.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\xmlParserAPIs.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent; Delegation Mode: PARENT_FIRST [1] com.ibm.ws.classloader.JarClassLoader@338761606 Local Classpath: Delegation mode: PARENT_FIRST [2] com.ibm.ws.classloader.ProtectionClassLoader@38e75786 [3] com.ibm.ws.bootstrap.ExtClassLoader@7e475784 [4] sun.misc.Launcher$AppClassLoader@7e5a5784 [5] sun.misc.Launcher$ExtClassLoader@7e565784 -Original exception- java.lang.NoClassDefFoundError: OCA/OCAdbdll/DbDLLOperations at java.lang.ClassLoader.defineClass0(Native Method) at java.lang.ClassLoader.defineClass(ClassLoader.java(Compiled Code)) at java.security.SecureClassLoader.defineClass(SecureClassLoader.java(Compiled Code)) at com.ibm.ws.classloader.CompoundClassLoader._defineClass(CompoundClassLoader.java:576) at com.ibm.ws.classloader.CompoundClassLoader.findClass(CompoundClassLoader.java(Compiled Code)) at com.ibm.ws.classloader.CompoundClassLoader.loadClass(CompoundClassLoader.java(Compiled Code)) at java.lang.ClassLoader.loadClass(ClassLoader.java(Compiled Code)) at com.crystaldecisions.reports.queryengine.driver.i.<init>(Unknown Source) at com.crystaldecisions.reports.queryengine.driver.i.case(Unknown Source) at com.crystaldecisions.reports.queryengine.av.ak(Unknown Source) at com.crystaldecisions.reports.queryengine.av.else(Unknown Source) at com.crystaldecisions.reports.queryengine.av.byte(Unknown Source) at com.crystaldecisions.reports.queryengine.av.do(Unknown Source) at com.crystaldecisions.reports.queryengine.as.new(Unknown Source) at com.crystaldecisions.reports.queryengine.at.long(Unknown Source) at com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source) at com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source) at com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source) at com.crystaldecisions.reports.reportdefinition.cy.b(Unknown Source) at com.crystaldecisions.reports.reportdefinition.cy.long(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.o(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.a(Unknown Source) at com.crystaldecisions.reports.common.ab.a(Unknown Source) at com.crystaldecisions.reports.common.ab.if(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.if(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.o(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.a.a(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.a(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.JPEReportSourceFactory.createReportSource(Unknown Source) at com.crystaldecisions.report.web.a.a.K(Unknown Source) at com.crystaldecisions.report.web.event.aa.a(Unknown Source) at com.crystaldecisions.report.web.event.aa.a(Unknown Source) at com.crystaldecisions.report.web.event.bx.a(Unknown Source) at com.crystaldecisions.report.web.event.b1.broadcast(Unknown Source) at com.crystaldecisions.report.web.event.as.a(Unknown Source) at com.crystaldecisions.report.web.WorkflowController.if(Unknown Source) at com.crystaldecisions.report.web.WorkflowController.doLifecycle(Unknown Source) at com.crystaldecisions.report.web.ServerControl.a(Unknown Source) at com.crystaldecisions.report.web.ServerControl.processHttpRequest(Unknown Source) at com.crystaldecisions.report.web.viewer.taglib.ServerControlTag.doEndTag(Unknown Source) at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.doEndTag(Unknown Source) at com.ibm._jsp._sample._jspx_meth_crviewer_viewer_0(_sample.java:135) at com.ibm._jsp._sample._jspService(_sample.java:77) at com.ibm.ws.jsp.runtime.HttpJspBase.service(HttpJspBase.java:88) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1212) at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:629) at com.ibm.wsspi.webcontainer.servlet.GenericServletWrapper.handleRequest(GenericServletWrapper.java:117) at com.ibm.ws.jsp.webcontainerext.JSPExtensionServletWrapper.handleRequest(JSPExtensionServletWrapper.java:171) at com.ibm.ws.jsp.webcontainerext.JSPExtensionProcessor.handleRequest(JSPExtensionProcessor.java:230) at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest(WebApp.java:2837) at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest(WebGroup.java:220) at com.ibm.ws.webcontainer.VirtualHost.handleRequest(VirtualHost.java:204) at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:1681) at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:77) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:421) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:367) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.ready(HttpInboundLink.java:276) at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.sendToDiscriminaters(NewConnectionInitialReadCallback.java:201) at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.complete(NewConnectionInitialReadCallback.java:103) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.requestComplete(WorkQueueManager.java:548) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.attemptIO(WorkQueueManager.java:601) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.workerRun(WorkQueueManager.java:934) at com.ibm.ws.tcp.channel.impl.WorkQueueManager$Worker.run(WorkQueueManager.java:1021) atFor those who would have the same problem, here is how I could eventually fix it.
Since the Flex Test Drive is sometimes out of sync with flash builder 4, I recreated a project using other help pages on Adobe site :
Entry point :
http://help.adobe.com/en_US/Flex/4.0/AccessingData/WSbde04e3d3e6474c4-668f02f4120d422cf08- 7ffd.html
As suggested, I used the New Project wizard to create a new project, with :
Application server type : J2EE
Check the radio button "Use remote object access service : BlazeDS"
Then, as indicated in following pages (section "Accessing BlazeDS")... :
file:///C:/Mes%20documents%20C/Commun/Developpement/Documentation/HT-Tracks/AccessingData/ help.adobe.com/en_US/Flex/4.0/AccessingData/WSbde04e3d3e6474c4-668f02f4120d422cf08-7ffe.ht ml#WSbde04e3d3e6474c4-19a3f0e0122be55e1b7-8000
...I selected the "Data / Connect to Data/Services..." menu option, which started the Data/service connection wizard.
There, I selected a BlazeDS (and not Web Services) service type, and everything went fine.
Suggestion to adobe staff : maybe it would be useful to update the Flex Test Drive to reflect Flash Builder 4 ?
Very nice product anyway, so far, congratulations...
Rgds
Marc. -
Access Sequence - Error while defining it
Hi all,
I am getting the below error while defining a access sequence.
' UNFAVOURABLE SEQUENCE OF FIELDS - POSSIBLE PERFORMANCE PROBLEMS'
Could anyone please help me this..
Thanks,
ArthyHi Hegal,
I followed the basic principle. I was trying to define a new access sequence for the pricing conditions...
But I got the error that i reported earlier. I saved it inspite of the error. The access sequence got created but I am not sure if it will give any errors in my pricing procedure while executing the sales order.
Do you think it is some config error?
Thanks,
Arthy -
hi all
why we define only retained earnings & translation adjustment accounts only while we defining SOBHello.
I'm not sure if i understood your problem correctly. But from what i understood, you are inquiring as to why the other accounts are not defined when creating the SOB. If this is the issue, this is because a seperate Chart of Accounts is attached when you are defining the Set of Books. In R12, you have the option to attach a Ledger in the Accounting Setup Manager. This contains all the other accounts that you define using your Key Flexfield called Accounting Flexfield.
Hope this helps
Miranga -
Connection error while defining a IT resource for SQLServer
Hello,
I am new to the OIM. I am trying to provision users to a SQLServer database. I installed the DBConnector successfully, but while defining a ITResource (of type 'DBUM ITResource definition') for SQLServer from Web UI, I am getting this error.
Test connectivity is not supported for the IT resource type DBUM ITResource definition
Click Back to correct the connection parameters and re-test connection or click Continue to create the IT Resource anyway
Here are the parameters I am providing. I am sure I am entering the correct uid and pwd for the database.
Abandoned connection timeout :900
Admin ID : testUser
Admin Password : testPassword
Configuration : Lookup.DBUM.MSSQL.Configuration
Connection pooling supported : False
Connection Properties :
Connection Retries : 2
Connection Timeout : 1000
Connection wait timeout : 60
Database Driver : com.microsoft.sqlserver.jdbc.SQLServerDriver
Database Name : testDatabase
Inactive connection timeout : 300
Initial pool size : 3
isSecure : No
JDBC URL : jdbc:sqlserver://SQLServerHost;database=testDatabase
Max pool size : 30
Min pool size : 2
Native connection pool class definition :
Pool excluded fields : Configuration Lookup
Pool preference : Default
ResourceConnection class definition : oracle.iam.connectors.dbum.common.db.util.DBUMResourceConnectionImpl
Retry Interval : 1000
Target supports only one connection : False
Timeout check interval : 30
Validate connection on borrow : true
Thanks!
KabiHi,
I setup the trace of com.waveset.adapter.ScriptedConnection.
the log message is following, what's reason of prblem? please help.
20070723 16:16:47.937 httpWorkerThread-8080-4(0x01341244) ScriptedConnectionPool#getConnection() Entry no args
20070723 16:16:47.937 httpWorkerThread-8080-4(0x01341244) ScriptedConnectionPool#getConnection() Exit void
20070723 16:16:47.938 httpWorkerThread-8080-4(0x01341244) TelnetConnection#connect() Entry no args
20070723 16:16:47.938 httpWorkerThread-8080-4(0x01341244) TelnetConnection#connect() Exit void
20070723 16:16:47.938 httpWorkerThread-8080-4(0x01341244) ScriptedConnection#runScript(Script) Entry no args
20070723 16:16:47.938 httpWorkerThread-8080-4(0x01341244) ScriptedConnection#processWaitFor() Entry no args
20070723 16:16:47.939 httpWorkerThread-8080-4(0x01341244) ScriptedConnection#refreshUnprocessedInput(int, int, String, boolean) Entry no args
20070723 16:17:57.990 httpWorkerThread-8080-4(0x01341244) ScriptedConnection#processWaitFor() Info Script failed waiting for "LOGIN:" with the following unprocessed text: "" -
Error while loading the planning book
Hi There,
I am getitng the below error while loading the data in planning book
"Error for COM routine using application program (return code 40,016)
Error reading data - Planning book cannot be processed further"
Ran /SAPAPO/TS_LCM_CONS_CHECK and /SAPAPO/TS_LCM_REORG but its not working , still getting the same error.
Could you please advise?
Thanks,
KrishnaHi Krishna,
Looks like a key figure might be incorrectly created or there might be a problem in aggregation/disaggregation of key figures due to numerous number of CVCs.
Regards
JB -
Error while filling set up table SD-Billing Documents - Perform Setup
Hello friends,
while filling set up table of SD-Billing Documents - Perform Setup
i am getting error 'TSV_TNEW_PAGE_ALLOC_FAILED' . i am executing this job in background process . Please suggest me a solution .
Regards
Nilesh VakilHi,
Try some other LO extractor in RSA3 to check if you get the same error.
If you dont then it may not be system memory issue, check if thr is some user exit written for the extractor.The problem could be in the user exit whr the internal table may get overflown and lead to the page overfloen dump.
If this is also not the case try reducing the packet size.
Let me know if the issue is resolved.
Regards,
Ashwin -
Error while defining the Payroll
Hi All,
I am getting an error while savng the details. It is showing an errror 'Please enter the required value for the employers PAYE Reference segment in the GB statutory info flexfield.
Aslo another error is i have created the Payment method but it is not showing me at Payment description screen..
Can any one help me out of this?
Thanks....On the Define Payroll screen, there is an Additional Information box(DFF) for GB Statutory Info.
There are some mandatory fields you need to enter, before you can save the payroll.
If the Employers PAYE Reference field doesn't get you any data, you need to first define the Tax Reference details at the BG Level -
Re: Statutory Information
What exactly do you mean by Payment Description Screen ?
Cheers -
Error while defining derivation rules in FMDERIVE
We are currently on ECC6. While defining Funds Mgmt .... activated the derivation rules in FMRULES. But when I try to define the derivation rules in FMDERIVE .. I get the following error: Syntax error in program "RFMDERIVE003 ".
Error in the ABAP Application Program
The current ABAP program "SAPMABADR" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "RFMDERIVE003 " in include
"RFMDERIVE003 " in
line 32:
"The Dictionary structure or table "FMDERIVE003" is either not active o"
"r does not exist."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP* "
Error in the ABAP Application Program
The current ABAP program "SAPMABADR" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
How can the same be rectified. Kindly help.
Thanx
ShivajiHi,
Check the OSS note Note 644974 - Syntax error in program RFMXPR47. Looks like table FMDERIVE is missing.
Regards,
Sanjay -
Error while running scheduled batch book
I'm receiving this error while trying to produce a large book through a scheduled batch within Workspace. The version is EPM 11.1.1.3
Status for various save options for "Cable and Communications/... BUDGET SUBMISSION .../.. SUBMISSION PACKAGES ../00 Budr - Detailed Budget Book"
Saved successfully in repository as //00 Budr - Detailed Budget Book
Error while saving as PDF
; nested exception is:
java.rmi.ServerException: RemoteException occurred in server thread; nested exception is:
com.hyperion.reporting.util.HyperionReportException: Could not find information about PDF generation for instance number:
Batch "Cable and Communications/... BUDGET SUBMISSION .../.. SUBMISSION PACKAGES ../Budget Detailed Book" finished at Friday, December 18, 2009 12:18:33 AM EST
I am able to produce smaller books and view them fine. This one book is approx. 300 pages and the successful book is approx. 100 pages
thxno luck.
im getting following errors:
updatamanagergroup.java:3: package Thor.API.Operations does not exist
import Thor.API.Operations.*;
^
updatamanagergroup.java:4: package Thor.API does not exist
import Thor.API.tcResultSet;
^
updatamanagergroup.java:5: package Thor.API does not exist
import Thor.API.tcUtilityFactory;
^
updatamanagergroup.java:6: package com.thortech.xl.crypto does not exist
import com.thortech.xl.crypto.tcCryptoUtil;
^
updatamanagergroup.java:7: package com.thortech.xl.scheduler.tasks does not exist
import com.thortech.xl.scheduler.tasks.SchedulerBaseTask;
^
updatamanagergroup.java:8: package com.thortech.xl.util.config does not exist
import com.thortech.xl.util.config.ConfigurationClient;
^
updatamanagergroup.java:13: cannot find symbol
symbol: class SchedulerBaseTask
public class updatamanagergroup extends SchedulerBaseTask
^
and so on....
23 errors
Edited by: user11136275 on Dec 24, 2009 12:22 AM -
Error while defining afield in Structure
Hi All..
I want to define a field MENGE ( Quantity and the lenght should be 8 and should hold 3 Decimals).
Hence i opted for a Data element CATSXT_DEFLT which is having QUAN, Length-8 and Decimal-3.
But while activating the structure, the system is prompting Error message as follow...
Diagnosis
You must specify reference tables and reference fields for fields containing currency amounts or quantity data. You have specified either only the reference field or the reference table and have not maintained either entry.
Procedure
Add the missing entry. You can do this with the single field maintenance function of the table.
Please Help me, as it is very urgent....hi,
try to find out a field in table
having this 'CATSXT_DEFLT' type.
then in the structure.
declare like this.
<b>tables : table_name
MENGE like table_name-field_name.</b>
do this.
<b>tables : TCATX_COMPONENTS.
data : begin of ..
MENGE like TCATX_COMPONENTS-DEFLT,
endof ..</b>
rgds
anver
pls mark hlpful answers
Message was edited by: Anversha s -
Error while adding set type to CRM Web UI(7.0)
Hi Gurus,
I was trying to add the custom set type to the product screen in Web UI . Followed the steps narrated in
http://wiki.sdn.sap.com/wiki/display/CRM/CreatingUIConfigurationforSetTypestodisplayonCRMProductOverviewpage.
Now the URL assignment Block is appering in lazy load. When I try to open I am getting the error
Diagnosis
An exception occurred during request processing. This was handled centrally. It changed the program flow and the result of the request probably contains errors.
Procedure
Contact your system administrator.
Procedure for System Administration
Activate checkpoint group BSP_WD_EXCEPTION_DISPLAY. To do this, use transaction SAAB. If the error recurs, further details are displayed.
Exception Details
CX_BSP_WD_INCORRECT_IMPLEMENT - Define component usage 'ZURLSETTYPE'
Method: CL_BSP_WD_REPOSITORY=>GET_CMP_USAGE_DEF
Source Text Row: 20
Is this a prob in customization or something else?
Please help
Thanks,
NeerajHi Neeraj,
It looks like you have created a custom compenent "ZURLSETTYPE". If it is the case please check in Run time repository for component "PRD01OV". Check if component usage of newly created component is defined, not then define it and see the result. this may help.
This doent work then please elaborate what you have done littile more.
Thanks & Regards,
Amit -
Error while defining new Plant
Hi all,
when i am defining plant in logistics general i am getting following error.
While selecting the region i am getting same dropdown list which is avilable in Country Field.
Please help, thanks in advance.
Regards
RamyaHI
You have to assign the Tax Calculation Procedure to the Country India.
Follow the path and assign TAXINN
IMG>Financial Accounting>Financial Accounting Global Settings>Tax on Sales/Purchases>Basic Settings-->Assign Country to Calculation Procedure
Assign the Procedure to IN India.
Prior to this check whether the tax procedure is available or not
in IMG>Financial Accounting>Financial Accounting Global Settings>Tax on Sales/Purchases>Basic Settings-->Check Calculation Procedure
regards
Prashanth -
What I am trying to do is, get the current row and compare with the previous from the resultset.
To achieve it I am using the previous(), absolute() and next() methods from ResultSet. Now to be able to use these methods I believe I need to define connx as:
Class.forName("oracle.jdbc.driver.OracleDriver");
con1 = DriverManager.getConnection("jdbc:oracle:thin:@uaix02....","....","....");
stmt1 = con1.createStatement(ResultSet.TYPE_SCROLL_SENSITIVE);
By doing so when I compile from JDeveloper, I am getting the following error:
C:\Program Files\Oracle\JDeveloper 3.2\myhtml\test548_html\untitled10.jsp
Warning: (0) ISO-8859-1 character set may not match project compiler setting.
Error: (82) method createStatement(int) not found in interface java.sql.Connection.
I am importing java.sql and oracle.jdbc libraries.
Any pointers to it would be greatly appreciated.
Thanks in Advance
Ajith
nullFixed...
Actually createStatement() takes zero or no arguments....
kash! the error messages had been more developer friendly....
Ajith
Maybe you are looking for
-
Hyperion Financial Management Installation Problem on WinXP system
Hi, I am trying to install EPM/HFM 11g from scratch. I have downloaded the following files and extracted them in a folder. I started the installation with a specified hyperion_home as C:\Hyperion1. APS-11113.zip EPM-Architect-11113.zip EPM-Foundation
-
I accidentally deleted some footage from an HDV project - footage that was shot on the Sony Z1U and captured with the M1U. I no longer have access to the camera or the deck; but I did manage borrow a friend's Canon HV10. However, I don't seem to be a
-
Can I change different background and font color on each records?
Hi, I had a Data_Block which contains some records, I had a field name 'currency' which contains value such as (HKD, JPY, CNY, CND, USD etc..) Let there there are 5 Records contain in that Data_Block and I wanted to change the background and font col
-
How do I tell if PublicOjbect is a folder?
I have a list of PublicObject, how can I tell the ones that are of type folder and the ones that represents files?? Francois.
-
Connection pooling in Weblogic using DB2
i am trying to configure the connection pooling in Weblogic console using DB2 and i put the ff informations: Name: myConnectionPool URL: jdbc db2://localhost:5000 Driver Class Name: COM.ibm.db2.jdbc.DB2Driver properties: user=db2admin for some reason