Error While Deleting cube Contents in Process Chain

Hi All ,
   I am getting a error when i am trying to delete the contents of two cubes in a Process Chain . The data of one cube is getting successfully deleted but while deleting the second one it results in a error.
Following are the messages :
1>Database table /BIC/FZCFEXP01 was deleted and recreated
2>Database table /BIC/EZCFEXP01 was deleted and recreated
3>Database table /BIC/FZCFEXP02 was deleted and recreated
4>Database table /BIC/EZCFEXP02 was deleted and recreated
5>Content Of Data Target ZCFEXP01 Successfully Deleted
6>Content Of Data Target ZCFEXP01 Successfully Deleted
7>System error: RSDU_DATA_EXISTS_TABLE_DB6/ DB6
8>Drop Cube Failed In Data Target ZCFEXP02
Can anyone Help ??
Sam
Any pointers . Help is highly appreciated.
Edited by: Samir Bihari on May 14, 2009 8:54 AM
Edited by: Samir Bihari on May 14, 2009 8:55 AM

Hi,
I'm not sure for this issue but it may relate to SP issue...
jst chk this notes:
Note 385293
Note 987754
rgds,

Similar Messages

GETWA_NOT_ASSIGNED error while running abap prog in process chain

Hi.
I am getting a runtime error GETWA_NOT_ASSIGNED while running an ABAP program in process chain.
But when i execute pro in SE38 , it's not giving any error.
Please any one can suggets what will be error.

Hi,
i also used to get error for a program executed through process chain but when it is executed in se38 it used to work... that is because my program try to access a application server folder and reads the file from there... the authorisation to this is not proper through process chain ..... once authorisation to the folder was given properly .. i am able to run...
Such things can happen in your case also... Try to analyse the dump in st22.... what happened ...
Regards
vamsi

Error while loading Masterdata Txt using process chains

Hi Guru's
              I am loading the masterdata texts for infoobject 0material, i am getting the following error:
"0MATERIAL : Data record 24 ('1215619 E '): version '1215619 ' is not valid     "
Points assured.
Thanks in advance.
Peddinti

Hi Jr,
        The data i am loading is a content data.i got the same error for all the records of 0Material info object.
regds,
Zakir Peddinti

Error while deleting data from a write optimized DSO using a Process Chain?

Dear Bwers,
I am facing a strange error while using process chains to delete data from data target which is a write optimized DSO. The process shows as failed but the data gets deleted in the DSO. The error message is as below. Did anybody have a similar problem? Any suggestions.
Thanks
Raj
Error while deleting content of InfoCube/DataStore object ZLSD_G03
Message no. RSDODSO153

Please, check if you get any short dump in ST22 related to this issue.

Error while crawling LOB contents (Error caused by exception: Microsoft.BusinessData.Infrastructure.BdcException)

Everytime when I perform a Full Crawl on the Central Administraion page, this error will appear and the crawl process will run into an infinite loop and nothing crawl success. I have tried delete and re-create the crawling content sources, start/stop
the search services but this error still appear.
Please help. Thanks a lot.
Error Message:
topicpages://
Error while crawling LOB contents.
( Error caused by exception: Microsoft.BusinessData.Infrastructure.BdcException
The shim execution failed unexpectedly - Exception has been thrown by the target of an invocation..:
System.Net.WebException The request failed with HTTP status 404: Not Found.;
SearchID = EFE3FAA4-12C3-40AD-B410-51D6189FC720 )

Tried scheduled an incremental every 10 minutes
Still getting error on crawling LOB contents. The incremental crawl ran into an infinite loop and nothing crawl success
Thanks for help.
Error Message:
topicpages://(servername)
Error while crawling LOB contents.
( Error caused by exception: Microsoft.BusinessData.Infrastructure.BdcException
The shim execution failed unexpectedly - Exception has been thrown by the target of an invocation..:
System.Net.WebException The request failed with HTTP status 404: Not Found.;
SearchID = B801BC11-8138-453F-AB4D-AA4BE4F5B57A )

Error while deleting values of characteristic /1FB/COMPANY/Company (RFC des

Dear all,
I am trying to synchronize Company master data between local BCS system and SAP BW with UGMD_BATCH_SYNC program. In the synchronization mode, Full Synschronization (Write and Delete) was selected.
However, I receive the following error message when executing the program:
Error while deleting values of characteristic /1FB/COMPANY/Company (RFC destination )
Message no. UGMD077
Diagnosis
When writing or deleting values of characteristic /1FB/COMPANY/Company errors occurred in the system with RFC destination . As the changes have already been defined in the local storage location this results in the master data being asynchronous between the local and remote storage location.
System Response
Processing is continued.
Procedure
Carry out a manual synchronization of the master data later using report UGMD_BATCH_SYNC. You can find additional information there under Application Help.
FYI, RFC Destination for my data basis is left blank.
What may causes this error and how to resolve it?
Thank you.

Hi MontyBurns,
May I know what settings that I need to check in UGMDSYNC program? As far as I can tell, there is only one parameter that we need to specify in the program i.e. Field Name. As I am trying to synchronize from BCS to BW, I have chosen the followings settings:
Source = LOCAL
Target = ALLBW
All,
Interesting thing that I notice after executing the UGMDSYNC program is the following message:
Synchronize/Display Variances Between Systems
     The compound dependencies for the attributes or texts are not defined
     uniformly in the systems investigated.
     Example:
     Texts are defined as language-specific in the local systems and as
     language-independent in remote systems (for example BW systems). The
     same can apply for other compounds such as version or time dependencies.
System Response
     The display of differences between the systems will be affected. A
     manual synchronization will not be completely successful.
Procedure
     1. Ensure that the dependencies for the attributes and texts are the
         same in all systems.
     2. Start the synchronization process again.
Procedure for System Administration
I can check the attributes and texts in BW via RSD1 by specifying InfoObject = 0COMPANY and checking the Master data/texts and Attribute tabs. But how do I check similar settings in BCS Workbench? I can't determine whether the Company text is language-dependent or not simply by displaying specific Company from Process View > Master Data > Consolidation Units > Company.
Thanks.

Error while deleting master data (Message no. RSDMD118)

Dear all,
I am performing a test to create and delete new Company Codes in Consolidation Workbench.
Creation of new Company Codes went on successfully but deleting them give me the following error message upon saving:
Error while deleting master data
Message no. RSDMD118
Since they are new Company Codes, they have not been used and stored in any BW cubes. Any idea on why BCS prevents me from deleting them?
Appreciate assistance to troubleshoot and resolve this error.
Thank you.

Thank you both for your replies.
I am sure those are not the case here as I deleted the Company immediately after creating it.
Just to make sure, I performed "Where-Used List" again and BCS confirmed that it is not being used anywhere:
Use of: Company UAT1 UAT Company 1
Number of Uses Found: 0
However, the same error message was displayed again after I tried to delete the Company and save the configuration. Still can't find any solid reason behind this.

Error while deleting a file which is in a folder which inturn in workspace

12:20:42.309 DELETE (FAILED: Conflict [(pre||post)-condition failed: x:concurrency-lock-denied]) Hello.java   (C:\CFolder1\WSF1\WSF2\Dev\HelloWorld\Package\Hello.java)
--- Problem summary: ---
12:20:42.309 DELETE (FAILED: Conflict [(pre||post)-condition failed: x:concurrency-lock-denied]) Hello.java   (C:\CFolder1\WSF1\WSF2\Dev\HelloWorld\Package\Hello.java)
I am getting above error while deleting a file which is in a folder which inturn in workspace

Here is the problem I have with deleting my folder. I had created a WD project TaxTool and and added the DC to my SC. There were obviously some checkedout activities. Being new to this, I deleted the project directly without checking in the activities. Now I have folder TaxTool/_comp with nothing underneath on the DTR server and on my client. I am unable to checkout TaxTool for delete but the checkout of _comp folder fails in NWDS with the following error:
<b>EDIT (FAILED: server response: Conflict [(pre||post)-condition failed: x:no-exclusivity-with-existing-checked-out-resources]) comp   (C:\JDI\JDIDEMO1\intelJDI_TEST\dev\inactive\DCs\intel.com\TaxTool\_comp\)</b>
If I try the same from the DTR shell, I get this following error:
<b>Unexpected problem occurred during executing command.Lockfile "C:\Documents and
Settings\bvedamur\.dtr\.syncdbs\5b0d8b2110a7a29883734c0407462df8.syncdbM.lock" is already in use by another process.</b>
I am the only user in the system (doing R&D) and I have tried Sync and Delete. Nothing works. Help appreciated.
Thx
Bhaskar

Lotus Notes connector: Error while crawling LOB contents

Hi all,
I am trying to configure Lotus Notes connector on SP search. We have successfully followed the Randy Rempel's blog on
test environment. No problem to search lotus notes content.
In production environment, we've followed the same procedure but we are facing the following problem. During the full crawl, the below error is thrown
Error while crawling LOB contents. ( Error caused by exception: Microsoft.BusinessData.Infrastructure.BdcException The shim execution failed unexpectedly - Exception has been thrown by
the target of an invocation..: System.ServiceModel.FaultException`1[System.ServiceModel.ExceptionDetail] An unexpected error occurred in the Lotus Notes protocol handler while processing the URL
We have forced Lotus Notes Connector to be more verbose, without success.
Any help will be appreciated
David

Reset the index and re-crawl. That usually claers it
If you are using NTLM authentication, then make sure that you specified the PassThrough authentication for crawling
Probably you need to debug the BDC code that underlies the external content types.
can you Check the permission that you have set for the lotus notes domino databases? Was the content access account added to the local administrator group?
If this helped you resolve your issue, please mark it Answered

DSO Activation Error - While Installing BI Content

HI Friend,
    First, I deleted one sap source systems for BW1 ( My bw1 server BI is : BW1CLNT100 ), later ,I create the same sap source system, But active 0FIAP_O03 ods,
had error:
DataSource 80FIAP_O03 does not exist in source system BW1CLNT100 of version A
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object 0FIAP_O03
I go to BW1CLNT100 datasoucres ,I not finded 80FIAP_O03 datasoucre, But I goto bw prd BI datasoucre, I found   80FIAP_O03 datasoucre.
I think loss 80FIAP_O03 datasoucre for BW1CLNT100 source system, because I am't delete Roules on the 0FIAP_O03 infosoucre for delete sap soucre systems.
DSO Activation Error - While Installing BI Content
this problem no issue, So I create new thread.
Now, How could me create or load 80FIAP_O03 datasoucre for BW1CLNT100 source system?
Now, I Replicate Datascoure for BW1CLNT100 source system, Delete old datasocure....... I go home, I will try tomorrow .

Hello,
You should generate the export data source for 0FIAP_O03 again, if there is still a problem please goto
RSA1 > SOURCE SYSTEMS > and right click on the relevant source system, find the datamart application component and
right click on this to replicate the datasource.
Best Regards,
Des

Regedit Permissions -"Access Denied" or "Error while deleting key" EVEN AS ADMIN!

Anyone tried deleting a registry key in Windows 7? Got "access denied" or "Error while deleting key"?
The usual response is, "You need to run regedit as an administrator". but I *AM* logged in as Administrator, and running regedit as administrator, trying to assign administrator full permissions on that registry key in order to delete it!!
Am I mistaken, or isn't Administrator supposed to be able to administer and control all the settings on the computer, in order to set it up for the "Average Joe" user?
So, under the permissions menu of that key, go to advanced, change the owner from System to Administrator, and try again. It's no longer saying "access denied", but "Cannot delete xxxxxx. Error while deleting key".
The scenario: Basically, the wireless has stopped working on a laptop. The device does not show up in Device Manager, but is in the registry, so the normal procedure is to delete the registry entry for the device in HKLM/System/CurrentControlSet (and /ControlSet001) /Enum/PCI ,then attach the device or restart the computer, it finds the "new" hardware and reinstalls it. Easy!...
Not with permission restrictions on the administrator account it's not! So I need to give myself permission, to give myself permission, to do a simple task like delete a single registry key! Why, Microsoft, why???!!! Please just make the Administrator account a hidden "God mode" account that can do anything, and make the lives of us techies much easier in the process!
/RANT
Now, where did I put that XP disc?!....

Hi,
I explain you:
Administrator does not mean "you get all rights to do anything." Administrator happens to be an account (or in your case, most likely the Local Administrators group) which by default is given some sensitive privileges like SeDebugPrivilege and
similar. However, as far as the security subsystem is concerned, it is just an account. (Very much unlike root in
Unix-like operating systems) If you aren't the owner of the key in question, and your account does not have WRITE_DAC access
to the registry key in question, then you won't be able to change the access control list on the key in question.
Try taking ownership first. By default, the local administrators group has SeTakeOwnershipPrivilege,
which allows taking ownership of any object even without the WRITE_OWNER permission
being granted by the object's discretionary access control list. Once you are the owner, you should be implicitly granted READ_CONTROL (which
allows you to read the security descriptor on the object in question), and WRITE_DAC (which
allows you to write to the DACL on the key in question). (Assuming the OWNER_RIGHTS SID
isn't in use; that's extremely unlikely)

Partitioning a cube in a Process chain

Hi,
How can I launch the partitioning of my cube in a process chain ?
Is there an ABAP program i can use with a variante ?
I have 3 cubes (one per Year : Y, Y-1, Y-2).
I would like to create a process chain for Shifting my data :
Delete data of cube Y-2
Load data Y-1 in cube Y-2
Delete data of cube Y-1
Load data in cube Y-1
Selective deletion in cube Y
When my cubes are empty I would like to make a new partitionning with the next year.
this | Next |
year    | year   |        old part.         |         new partioning
cube Y_           2007   | 2008      | 001.2007->012.2007 |      001.2008->012.2008
cube Y-1        2006   | 2007      | 001.2006->012.2006 |      001.2007->012.2007
cube Y-2        2005   | 2006      | 001.2005->012.2005 |      001.2006->012.2006
Thanks for any help.

Hi,
run transaction delete_facts and generate a deletion program for your cubes with a select-option for the year. Create variants for that programs to delete the relevant years.
Create a chain with the following steps:
1st. abap to delete year - 3 from last cube
2nd. load year - 2 from previous cube to deleted cube
3rd. abap to delete year - 2 from previous cube
4th. load year - 1 from actual cube.
5th. delete year - 1 from actual cube.
Hope this helps!
kind regards
Siggi

Error while deleting a mapping

Hi all,
I am getting the following error while deleting a mapping. My client version is 10.2.0.4.36
API5072: Internal Error: Null message for exception. Please contact Oracle Support with the stack trace and details on how to reproduce it.
oracle.wh.util.Assert: API5072: Internal Error: Null message for exception. Please contact Oracle Support with the stack trace and details on how to reproduce it.
     at oracle.wh.util.Assert.owbAssert(Assert.java:51)
     at oracle.wh.ui.jcommon.OutputConfigure.showMsg(OutputConfigure.java:216)
     at oracle.wh.ui.common.CommonUtils.error(CommonUtils.java:370)
     at oracle.wh.ui.common.WhDeletion.doActualDel(WhDeletion.java:512)
     at oracle.wh.ui.common.WhDeletion.deleteObject(WhDeletion.java:203)
     at oracle.wh.ui.common.WhDeletion.deleteObject(WhDeletion.java:283)
     at oracle.wh.ui.jcommon.tree.WhTree.deleteItem(WhTree.java:346)
     at oracle.wh.ui.console.commands.DeleteCmd.performAction(DeleteCmd.java:50)
     at oracle.wh.ui.console.commands.TreeMenuHandler$1.run(TreeMenuHandler.java:188)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:189)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:478)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
Thanks in advance!
Sebastian

These type of Internal Errors are all too common in OWB and it's difficult to diagnose the exact problem.
I'd suggest closing the Design Centre, going back in and trying to delete it again, this will often resolve Internal errors.
There's also an article on Metalink Doc ID: 460411.1 about errors when deleting mappings but it's specific to an ACLContainer error, so may or may not be of use.
One of the suggestions is to connect as the Repository Owner rather than a User and try to delete the mapping.
Cheers
Si
Edited by: ScoobySi on Sep 10, 2009 11:44 AM

Error while crawling LOB contents SharePoint 2013

Error while crawling LOB contents SharePoint 2013
I have Configured the BDC Service application using SQL external content. The connection was successful and I am able to see the external content in the List "BDC Demo" . But when I search in the BDC Demo site it gives nothing.
So I checked in the crawl logs and identified that it shows " 1 " under error. to further drill down the issue , I went to click on "1" and see the error message : Error while crawling LOB contents SharePoint 2013 .
I have created an external DB named BCSDemo_DB for which I have granted my search Service account read& write permission.
I have added the same account under administrators for both secure store and BCS service applications.
I have done index reset , done a full crawl but the error still occurs.
Can someone please advise if I am missing something.
Regards

Hi Aravinda,
According to your description, my understanding is that you got an error when you crawled SQL database table in SharePoint 2013.
This error is caused by the fact that the default content access account does not have any rights to access the metadata store in the Business Data Connectivity Service Application.
Or it is caused by the default content access account has no rights on the SQL database.
For fixing it, you need to grant the default content access account permission on metadata store in the Business Data Connectivity Service Application and the SQL database. You can refer to the link below:
http://www.sharepointinspiration.com/Lists/Posts/Post.aspx?ID=5
After that, do a full crawl for the content source.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Error while updating the content in workflow

Hi,
I'm getting an error while updating the content in workflow thru the checkout option. i.e. contributor checks in the content - reviewer rejects the content - then contributor checks out and modifies the content as per the reviewer's remarks and while checking in the following error occurs
Content Server Request Failed
Unable to check in content item 'HO000128' for workflow. Unable to execute service method 'checkInUpdateRevByID'. (System Error: Runtime error: java.lang.NullPointerException
at intradoc.server.DocServiceHandler.checkInRevByID(DocServiceHandler.java:248)
at intradoc.server.DocServiceHandler.checkInUpdateRevByID(DocServiceHandler.java:240)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:617)
at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:293)
at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:79)
at intradoc.server.Service.doCodeEx(Service.java:490)
at intradoc.server.Service.doCode(Service.java:472)
at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1360)
at intradoc.server.Service.doAction(Service.java:452)
at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1201)
at intradoc.server.Service.doActions(Service.java:447)
at intradoc.server.ServiceRequestImplementor.executeSubServiceCode(ServiceRequestImplementor.java:1071)
at intradoc.server.Service.executeSubServiceCode(Service.java:3497)
at intradoc.server.ServiceRequestImplementor.executeServiceEx(ServiceRequestImplementor.java:942)
at intradoc.server.Service.executeServiceEx(Service.java:3492)
at intradoc.server.Service.executeService(Service.java:3476)
at intradoc.server.DocServiceHandler.determineWorkflowCheckin(DocServiceHandler.java:3833)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:617)
at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:293)
at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:79)
at intradoc.server.Service.doCodeEx(Service.java:490)
at intradoc.server.Service.doCode(Service.java:472)
at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1360)
at intradoc.server.Service.doAction(Service.java:452)
at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1201)
at intradoc.server.Service.doActions(Service.java:447)
at intradoc.server.ServiceRequestImplementor.executeSubServiceCode(ServiceRequestImplementor.java:1071)
at intradoc.server.Service.executeSubServiceCode(Service.java:3497)
at intradoc.server.ServiceRequestImplementor.executeServiceEx(ServiceRequestImplementor.java:942)
at intradoc.server.Service.executeServiceEx(Service.java:3492)
at intradoc.server.Service.executeService(Service.java:3476)
at intradoc.server.Service.doSubService(Service.java:3465)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:617)
at intradoc.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:279)
at intradoc.common.ClassHelperUtils.executeMethod(ClassHelperUtils.java:264)
at intradoc.server.Service.doCodeEx(Service.java:507)
at intradoc.server.Service.doCode(Service.java:472)
at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1360)
at intradoc.server.Service.doAction(Service.java:452)
at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1201)
at intradoc.server.Service.doActions(Service.java:447)
at intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1121)
at intradoc.server.Service.executeActions(Service.java:433)
at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:635)
at intradoc.server.Service.doRequest(Service.java:1707)
at intradoc.server.ServiceManager.processCommand(ServiceManager.java:359)
at intradoc.server.IdcServerThread.run(IdcServerThread.java:197))
Please help to resolve.
Thanks in advance
Prasad

I also get error while updating the content in workflow thru the checkout option as reviewer. i.e. contributor checks in the content - then reviewer either updates the metadata or checks out and modifies the content and while checking in the following error occurs
Content Server Request Failed
Unable to update the content item information for 'HO000128'.
The content ID must be specified.
Please help to resolve.
Thanks in advance
Prasad

Error While Deleting cube Contents in Process Chain

Similar Messages

Maybe you are looking for