Error while deleting enhanced component

Hi,
i have enhanced the component 'ICCMP_BP_CP' and the view 'ICCMP_BP_CP/BuPaContactPersonCreat'. When we enhanced the component, it throwed me the error message that user is not authorized for sicf transaction. after getting the authorization, i enhanced the component. But when we we enhanced the view, it was throwing view bind exception in Web UI. so, we deleted the enhanced view and when we are trying to delete the enhanced component 'ICCMP_BP_CP', its throwing the error that 'run time repositry could not be loaded',
After I tried deleting the component enhancement, I can still open that component with enhancement set from BSP_WD_CMPWB but it doesn't show me any repository.xml. Also, I don't see any entry for the enhanced component in BSPWD_CMP_C_REPL.
I am attaching the screen shots like how I am deleting the enhanced component. Could you please tell me how to delete it.
Thanks & Regards,
Kamesh Bathla

Hello,
Open table BSPWDV_COMP_EXT via SM30 and open it with the Enhancement Set in which you created the enhancement you want to delete. (or the view cluster BSPWDVC_CMP_EXT via SM34)
Look for the component for which you want the enhancement to be deleted. Note down the "Runtime Rep. BSP application" and delete the record.
Open the BSP application you noted down in SE80 and delete the (incorrect) enhancements, then delete the whole BSP application.
Restart enhancing the component.
Hope this helps,
Joost

Similar Messages

Error while Deleting Software Component

Hi All,
I am getting following error while deleting Software Component Version:
Unable to Delete object DELETEDEMO_COMPONENET, 1.0 of delete.
You cannot delete a sotware component version if it contains imported interfaces.
Is there any shortcut isntead of deleting all objets manuually?
Sri

Hi Sri.
It's very simple
Solution:
Double Click on Software Component, On Right Hand side >Go to Software Component Version->Delete the software component.If all the necessary Objects have been properly deleted, there will be no problem in Deleting the Software Componet version
1) Delete the created Data Types, Message Types, Message Interfaces, Message Mappings, and Interface Mappings.
2) There should be no Imported SAP Objects in the Software Component. If any delete them and activate changes.
3) Delete all namespaces in the editor using sign. Do not save the changes.
4) Delete the two default data types that are created in the Interface Objects-->Data Types of the software component version (ExchangeFaultdata, ExchangeLogdata). Now save changes for the s/w component version and activate the changes. Ignore the warnings that pop-up.
5) The radio button for u201CInterface import should be at u201CNot permittedu201D instead of u201CImport RFC and IDoc Interfaces from SAP Systems Permittedu201D.
6) Now go to Software component version menu in the right hand pane. Click on delete and the software component vanishes from left hand pane
>> Is there any shortcut isntead of deleting all objets manuually?
NO.. other way or any any shortcut for this
Abid

Unspecified Error while deleting a component

Hi
I have a component with a <form> tag; which refers to a servlet which is registered with a particular path.
When i try to delete the component I am getting "Unspecified Error" - error. Once i run the page am not able to select the component to delete also.
Any help will be appreciable
Thanks
Veena

Hi Veena,
Look at your log file to get complete stack trace to find the cause.
As a workaround, In crxde go to the page under par identify your component. Then delete that node & save the changes. An example to delete productlist from geometrixx product page is [1].
[1] /content/geometrixx/en/products/jcr:content/par/productlist
Thanks,
Sham

Error while deleting any component from the widget

Whenever i delete any component from widget it stops running..i means whenever after deleting i execte the widget nothing happens.........it gives me an error saying
"Syntax Error in line 1 " and no other information....so can anyone tell me how to resolve this????????

Hello,
This might happen when you delete Header or Footer from widget. It is already corrected in latest version of Tools. Workaround is to add dummy view that is not used anywhere in widget but contains Header and Footer.
Eriks

System Error While Deleting Software Component from Repository

Hi,
I have deleted datatypes,Interface types,Message types,Interface Mapping & Message Mapping also.
When im deleting Software Component from Repository,
I m getting the following System Error.
[-9402]:System Error:AK Unexpected Strategy information.
and im not able to delete.
Plz Suggest me.
Sree Ram.

hi stree ram...
u can get tth note directly form SAP service or go to transaction 'snote'....
and ther u can import it from the menu bar thers a option of download/upload....just put in the note no.
regards...
vishal
P.S : assign pts if answer found helpful

Error while deleting Interface

Hi all
I have a ODI interface which I need to delete. But when I do right click > delete ... I get an error message 'Error while deleting'. The details shows the following.
Please help me if you can
java.sql.SQLException: ORA-00923: FROM keyword not found where expected
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:185)
at oracle.jdbc.driver.T4CPreparedStatement.execute_for_describe(T4CPreparedStatement.java:503)
at oracle.jdbc.driver.OracleStatement.execute_maybe_describe(OracleStatement.java:965)
at oracle.jdbc.driver.T4CPreparedStatement.execute_maybe_describe(T4CPreparedStatement.java:535)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1051)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2984)
at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3026)
at com.sunopsis.l.r.b(r.java)
at com.sunopsis.l.r.a(r.java)
at com.sunopsis.l.r.a(r.java)
at com.sunopsis.l.r.a(r.java)
at com.sunopsis.l.r.a(r.java)
at com.sunopsis.l.e.a(e.java)
at com.sunopsis.l.f.a(f.java)
at com.sunopsis.l.a.a(a.java)
at com.sunopsis.l.a.a(a.java)
at com.sunopsis.dwg.DwgObject.f(DwgObject.java)
at com.sunopsis.dwg.DwgObject.a(DwgObject.java)
at com.sunopsis.dwg.DwgObject.deleteAction(DwgObject.java)
at com.sunopsis.dwg.DwgObject.a(DwgObject.java)
at com.sunopsis.dwg.DwgObject.deleteAction(DwgObject.java)
at com.sunopsis.dwg.DwgObject.a(DwgObject.java)
at com.sunopsis.dwg.DwgObject.deleteAction(DwgObject.java)
at com.sunopsis.dwg.DwgObject.a(DwgObject.java)
at com.sunopsis.dwg.DwgObject.a(DwgObject.java)
at com.sunopsis.dwg.DwgObject.delete(DwgObject.java)
at com.sunopsis.dwg.DwgObject.delete(DwgObject.java)
at com.sunopsis.graphical.g.d.c(d.java)
at com.sunopsis.graphical.g.d.a(d.java)
at com.sunopsis.graphical.s.m.actionPerformed(m.java)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.AbstractButton.doClick(Unknown Source)
at com.jidesoft.plaf.vsnet.VsnetMenuItemUI.doClick(Unknown Source)
at com.jidesoft.plaf.vsnet.VsnetMenuItemUI$MouseInputHandler.mouseReleased(Unknown Source)
at java.awt.Component.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
thanx
Sam

It's about underlying SQL. If your working repository is on Oracle you can try something like this:
- connect to your work repository
- try deleting interface
- if it fails look into v$sqlarea for your query
- paste it here

Error while deleting a mapping

Hi all,
I am getting the following error while deleting a mapping. My client version is 10.2.0.4.36
API5072: Internal Error: Null message for exception. Please contact Oracle Support with the stack trace and details on how to reproduce it.
oracle.wh.util.Assert: API5072: Internal Error: Null message for exception. Please contact Oracle Support with the stack trace and details on how to reproduce it.
     at oracle.wh.util.Assert.owbAssert(Assert.java:51)
     at oracle.wh.ui.jcommon.OutputConfigure.showMsg(OutputConfigure.java:216)
     at oracle.wh.ui.common.CommonUtils.error(CommonUtils.java:370)
     at oracle.wh.ui.common.WhDeletion.doActualDel(WhDeletion.java:512)
     at oracle.wh.ui.common.WhDeletion.deleteObject(WhDeletion.java:203)
     at oracle.wh.ui.common.WhDeletion.deleteObject(WhDeletion.java:283)
     at oracle.wh.ui.jcommon.tree.WhTree.deleteItem(WhTree.java:346)
     at oracle.wh.ui.console.commands.DeleteCmd.performAction(DeleteCmd.java:50)
     at oracle.wh.ui.console.commands.TreeMenuHandler$1.run(TreeMenuHandler.java:188)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:189)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:478)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
Thanks in advance!
Sebastian

These type of Internal Errors are all too common in OWB and it's difficult to diagnose the exact problem.
I'd suggest closing the Design Centre, going back in and trying to delete it again, this will often resolve Internal errors.
There's also an article on Metalink Doc ID: 460411.1 about errors when deleting mappings but it's specific to an ACLContainer error, so may or may not be of use.
One of the suggestions is to connect as the Repository Owner rather than a User and try to delete the mapping.
Cheers
Si
Edited by: ScoobySi on Sep 10, 2009 11:44 AM

Error while deleting values of characteristic /1FB/COMPANY/Company (RFC des

Dear all,
I am trying to synchronize Company master data between local BCS system and SAP BW with UGMD_BATCH_SYNC program. In the synchronization mode, Full Synschronization (Write and Delete) was selected.
However, I receive the following error message when executing the program:
Error while deleting values of characteristic /1FB/COMPANY/Company (RFC destination )
Message no. UGMD077
Diagnosis
When writing or deleting values of characteristic /1FB/COMPANY/Company errors occurred in the system with RFC destination . As the changes have already been defined in the local storage location this results in the master data being asynchronous between the local and remote storage location.
System Response
Processing is continued.
Procedure
Carry out a manual synchronization of the master data later using report UGMD_BATCH_SYNC. You can find additional information there under Application Help.
FYI, RFC Destination for my data basis is left blank.
What may causes this error and how to resolve it?
Thank you.

Hi MontyBurns,
May I know what settings that I need to check in UGMDSYNC program? As far as I can tell, there is only one parameter that we need to specify in the program i.e. Field Name. As I am trying to synchronize from BCS to BW, I have chosen the followings settings:
Source = LOCAL
Target = ALLBW
All,
Interesting thing that I notice after executing the UGMDSYNC program is the following message:
Synchronize/Display Variances Between Systems
     The compound dependencies for the attributes or texts are not defined
     uniformly in the systems investigated.
     Example:
     Texts are defined as language-specific in the local systems and as
     language-independent in remote systems (for example BW systems). The
     same can apply for other compounds such as version or time dependencies.
System Response
     The display of differences between the systems will be affected. A
     manual synchronization will not be completely successful.
Procedure
     1. Ensure that the dependencies for the attributes and texts are the
         same in all systems.
     2. Start the synchronization process again.
Procedure for System Administration
I can check the attributes and texts in BW via RSD1 by specifying InfoObject = 0COMPANY and checking the Master data/texts and Attribute tabs. But how do I check similar settings in BCS Workbench? I can't determine whether the Company text is language-dependent or not simply by displaying specific Company from Process View > Master Data > Consolidation Units > Company.
Thanks.

Error while deleting master data (Message no. RSDMD118)

Dear all,
I am performing a test to create and delete new Company Codes in Consolidation Workbench.
Creation of new Company Codes went on successfully but deleting them give me the following error message upon saving:
Error while deleting master data
Message no. RSDMD118
Since they are new Company Codes, they have not been used and stored in any BW cubes. Any idea on why BCS prevents me from deleting them?
Appreciate assistance to troubleshoot and resolve this error.
Thank you.

Thank you both for your replies.
I am sure those are not the case here as I deleted the Company immediately after creating it.
Just to make sure, I performed "Where-Used List" again and BCS confirmed that it is not being used anywhere:
Use of: Company UAT1 UAT Company 1
Number of Uses Found: 0
However, the same error message was displayed again after I tried to delete the Company and save the configuration. Still can't find any solid reason behind this.

Error While deleting the Profit Center

Hi I am getting the below error while deleting the Profit center. Please help me how to fix this issue...
Profit center Scenario was activated in New GL Accounting
what configurations do i need to change to fix this error? Kindly advise me..
Thanks
Kishore

Dear,
while deleting the profit center we have to requrie follow the steps
1) OBR1 - Reset Transaction data
2)OBR2 - Reset the master data
3)OKKS - Set Controlling Area
4)OKC3 - Delete Transcation Data
5) KL14 - Delete Activity Types
6)OKE5 - Profit center De - Active
7)OKE1 - Profit center Transcation data delete
8)OKE2 - profit center delete
if if you follow above steps easily we can make the delete the profitcenter and we donot have to activate profitcenter
i hope solve you r problem
With regards /G chandu

Error while deleting the agreement

Hi,
I am facing the following error while deleting the agreement.
There was an error deleting agreement.
Error -: AIP-16015: Delete of Internal Delivery Channel Usage failed with error: Cannot delete Internal Delivery Channel Usage which is referenced by Participant Delivery Channel
Error -: AIP-16011: Cannot delete Internal Delivery Channel Usage which is referenced by Participant Delivery Channel
We are getting the same error while deleting the individual TP participants from the agreement.
I don't have any agreements deployed on the B2B.
Can you please let me know the reason for this error?
Regard,
Ravi Shah

Please refer B2B Error:- AIP-16015 and AIP-16016 when deleting a TP Agreement

Error while deleting from BIA index

HI EXPERTS GETTING BELOW ERROR PLZ GIVE CLARITY ON THIS:
1.A communication error occured, with the TREX TcpIp
2.Error while deleting from BIA index; reconstruction required
THANKS &REGARDS,
rAMESH,

Dear Ramesh,
Please check the connection with BIA. Please ask the Basis team to check the BW to BIA connection if they maintain it.
YOu can go to rsddbiamon2 and check BIA connection availibility for more details.
If that is right please try redoing the step at which you faced error and it should help.
Please close the question if you have got the answer or solved it.
Regards,
Den

Error while deleting the Master data

Hi Friends,
i am getting the below error while deleting the data from a master data:-
The system is unable to delete all of the specified master data,because some of it is still in use. (See log:Object RSDMD, sub-object MD_DEL )
Do you want to delete the data records that are no longer in use?
Could you guide how should i proceed to delete the data.
Regards,
Hirdesh

Hi Hirdesh,
If you are using master data in someother data targets u cant delete master data.So first you have to delete the data in data targets where this particual master data object is used, then remove the data in master data object.
Regards
Prasad

ERROR WHILE DELETING PAGE (WWC-44130)

sir,
I have a page group in my portal. It is is having many pages. i am getting following error
if i try to delete a page.
ERROR WHILE DELETING PAGE.(WWC-44130)
DAV: USER-DEFINED EXCEPTION (WWS-18026)
UNEXPECTED ERROR - ORA -01403: NO DATA FOUND (WWC-35000)
How to resolve this problem?
i have noticed thate in,
http://server/dav_portal/portal i can find all page group and subpages. the actual subpage, which is i am trying to delete is not visible. the same subpage is visible in portal navigate page.
how to resove this problem? please guide me properly. please help me.
portal verison 9.0.4.0.99
regards
sudhir

Dear Sudhir,
I don't know if this is of any help to you, but I sporadically encounter the same error when trying to delete regions/items/tabs etc. from TEMPLATES (not from pages). I am sure that this is a bug.
However, after creating a page from the template and then detaching it from the template, I can delete the corrupt elements. So I can currently work around the problem.
Maybe this applies to your situation?
Eckhard

Error while deleting the Data Source

Hi gurus,
I am getting an error while deleting a Data Source - "Source system XXXXX not found RSAR205".
but that source system no more available.
Is there any way to delete the Data Source.
Thanks in advance.
CK.

Hi,
That source system deleted.
Using RSDS also same error.
Thanks,
CK
Edited by: CK on Oct 3, 2008 11:37 AM

Error while deleting enhanced component

Similar Messages

Maybe you are looking for