Error while deleting instances and Human Tasks arent deleted
Hi,
The Error:
Cannot delete instances.
The process domain was unable to purge the instances from the datastore. The exception reported is: [POL-5130] table or view SYSTEM.WI_FAULT not found
Please check that the machine hosting the datasource is physically connected to the network. Otherwise, check that the datasource connection parameters (user/password) is currently valid.
sql statement: DELETE FROM wi_fault WHERE domain_ref = ?
When I query tasks over a jsp i also get the uncompleted human tasks from the deleted instances ( the try to delete them, i think they are there, but in the BPEL Console i cant see them anymore).
The Error occured since i patched my oracle soa suite 10.1.3.1 to 10.1.3.3.
What can I do?
I hope someone can help me.
My best Regards
I think you didn't ran the upgrade-script when you've installed the patchset 10.1.3.3 to your bpel environment.
Check the readme file of the patchset and you will see in the post-installation tasks you need to run the upgrade-script to patch your database environment as well.
Kind regards,
Nathalie
Similar Messages
-
Error while trying to retrieve the task: EventId(complete) does not belong
Hi Experts,
I have created a process composer DC in which i have created a process with two human tasks.
Each tasks is binded with web dynpro Iviews (means followed all the steps neccesary).
I deploed the DC successfully. now i started the process and got a task in my UWL but on click of the task i got the below error.
Error while trying to retrieve the task: EventId(complete) does not belong to referenced component interface of ComponentUsage(com.sap.tc.bpem.wdui.appcontainer.containercomp.ContainerComp:com.infosys.mdm.LoadRepositoryComp, createOnDemand=false, childComponent=com.infosys.mdm.LoadRepositoryComp)
[EXCEPTION]
java.lang.IllegalArgumentException: EventId(complete) does not belong to referenced component interface of ComponentUsage(com.sap.tc.bpem.wdui.appcontainer.containercomp.ContainerComp:com.infosys.mdm.LoadRepositoryComp, createOnDemand=false, childComponent=com.infosys.mdm.LoadRepositoryComp)
I have rechecked the event that i have created in the component controller and Interface controller.
Can you please help me in debunging the error.
thanks
NarendraHi,
sounds like an program error. That is an problem which occurs if one or multiple components try to lock the same galaxy object at the same point in time. Did you configured something special on the given task? e.g deadlines?
My proposal is to open an Customer Message so that we can have a detailed look onto the system. If this is not possible could you please provide the complete trace file and some more details about the modeled task?
Best Regards
Andreas -
Error while checking in and storing: C:\Documents and Settings\Administr
Dear
Whille saving then document in dms , i am getting this error.....
Error message is : "Error while checking in and storing: C:\Documents and Settings\Administrator\My Documen...."
Message Number is 26253
R KarthikeyanHi all,
Similar kind of issue occurred in one of our webdynpro applications of SAP NetWeaver Portal-
The error message "Error while checking in and storing" was returned by the BAPI while trying to replace documents in the DMS Server via portal.
But the documents were getting stored in the back end by the use of standard T-Codes.
Later it was found that ABAP tables COMPONENTS & COMPONENT_DATA are inconsistent by looking into the HTTP trace file.
The HTTP patch "http.c#21" was being used in our server.
SAP suggested the below mentioned steps-
-->Download the most recent SAPHTTP version & install it.
-->Then delete the RFC connections SAPHTTP & SAPHTTPA through T-Code SM59
-->Regenerate them again with report RSHTTP05
They were carried out in our ECC server & the issue was resolved.
Please try them out if applicable in your case & let us know.
Thanks & Regards,
Shreyashri Kar -
E26 253 Error while checking in and storing: \\sapserver\file.tif
Hi Experts,
I have now been fighting with this problem for a couple of weeks, and not been able to solve the issue.
My problem is to upload/check-in documents from the application serve in background.
I have a program to create DIF and attach files using BAPI_DOCUMENT_CREATE2.
When I'm running the program in foreground there is no problem.
When I run it in background I get the error message E26 254 Error while checking in and storing:
sapserver\file.tif
I have checked that the background process can see the document on the server and that is OK, so the problem must be within the actual storing of the document in DMS in the BAPI.
Any input to how I can solve this issue is appreciated.
Thanks in advance,
ThomasHi All,
We have now done some testing.
We got it to work on one of our systems but not on the other
I ran report RSCMST on both systems with the same backend directory. (A directory on the application server of the one that fails).
Running this report I get this result on the system that does not work.
HTTP interface test using function group SCMS_HTTP
21.06.2010 14:39:01
serverInfo:
contRep ZEBAN
contRepDescription PR Attachments
serverStatus running
serverVendor Copyright SAP AG, All rights reserved 1998, 2001
serverVersion 6300
serverBuild 193
serverTime 123902
serverDate 21.06.2010
serverStatusDescription
pVersion 0046
contRepStatus data(89%) log(1%)
contRepStatusDescription
ok 58.848
create(1): new doc (frontend) ok 445.211
create(2): new doc (back end)
check_subrc: subrc 2 instead 0
check_subrc: HTTP error: 400 Bad Request
create(2): new doc (back end) error
docGet/create(1): copy document ok 105.684
info(1): existing doc ok 26.881
update(1): new comp ok 47.050
info(2): after update ok 30.458
delete(1): unknown doc ok 33.061
delete(2): unknown comp ok 31.669
delete(3): existing doc ok 53.330
delete(4): deleted doc ok 34.781
delete(5): existing doc ok 31.088
putCert: ok 35.785
1 errors
Any ideas to what could be wrong?
Thanks in advance. -
BPM throws: "Error while trying to retrieve the task"
Hi,
<br><br>
When clicking on a task(WD-UI) in UWL, BPM throws an error message:<br>
Error while trying to retrieve the task<br><br>
Though, I am able to open up the task when I restart the server ( CE 7.1 EHP1 SP04 patched).
<br><br>
Anyone an idea?
<br><br>
Regards,
<br><br>
Wesley
<br><br>
The log file presents the following information (partially):
<br>
Caused by: java.lang.IllegalStateException: com.sap.glx.core.kernel.api.TransitionRollbackException: Exception during prepare, rolling back
at com.sap.bpem.tm.adapter.core.TaskAdapter$TicketSynchronization.beforeCompletion(TaskAdapter.java:581)
at com.sap.engine.services.ts.jta.impl.SynchronizationWrapper.beforeCompletion(SynchronizationWrapper.java:27)
at com.sap.engine.services.ts.jta.impl.TransactionImpl.commit(TransactionImpl.java:234)
... 86 more
Caused by: com.sap.glx.core.kernel.api.TransitionRollbackException: Exception during prepare, rolling back
at com.sap.glx.core.kernel.mmtx.AbstractTransactionBase.rollback(AbstractTransactionBase.java:544)
at com.sap.glx.core.kernel.mmtx.AbstractTransaction.do_prepare(AbstractTransaction.java:174)
at com.sap.glx.core.kernel.mmtx.AbstractTransaction.commit(AbstractTransaction.java:77)
at com.sap.bpem.tm.adapter.core.TaskAdapter$TicketSynchronization.beforeCompletion(TaskAdapter.java:579)
... 88 more
Caused by: com.sap.glx.core.kernel.trigger.TriggerLockingException: Cannot acquire lock for update <Context_0_TaskAttributes_ac33d162fa908f8198b3c740708bb6c5{919e4f4b-1581-11df-c72f-02004c4f4f50}(Instance_0_TaskHelloWorld2_ac33d162fa908f8198b3c740708bb6c5{919e4f45-1581-11df-b4f9-02004c4f4f50}(?),Scope_13_TaskHelloWorld2_ac33d162fa908f8198b3c740708bb6c5{919e4f4a-1581-11df-94e6-02004c4f4f50}(?),3,true)|Context_0_TaskAttributes_ac33d162fa908f8198b3c740708bb6c5(Instance_0_TaskHelloWorld2_ac33d162fa908f8198b3c740708bb6c5{919e4f45-1581-11df-b4f9-02004c4f4f50}(Instance_0_bpmboundary_new_24449a1f1a041ff7cd7deb8d764c6405{0d4c2925-157b-11df-b84e-02004c4f4f50}(?),null,Token_0_bpmboundary_new_24449a1f1a041ff7cd7deb8d764c6405{917829a3-1581-11df-b6e0-02004c4f4f50}(?),false),Scope_13_TaskHelloWorld2_ac33d162fa908f8198b3c740708bb6c5{919e4f4a-1581-11df-94e6-02004c4f4f50}(Instance_0_TaskHelloWorld2_ac33d162fa908f8198b3c740708bb6c5{919e4f45-1581-11df-b4f9-02004c4f4f50}(?)),4,*true)>
at com.sap.glx.core.kernel.trigger.node.LockingTreeJoinNode.process(LockingTreeJoinNode.java:638)
at com.sap.glx.core.kernel.trigger.core.BFSController.update(BFSController.java:173)
at com.sap.glx.core.kernel.trigger.impl.TriggerNetworkManagerImpl$SequentialController.update(TriggerNetworkManagerImpl.java:550)
at com.sap.glx.core.kernel.mmtx.AbstractTransaction.do_trigger(AbstractTransaction.java:199)
at com.sap.glx.core.kernel.mmtx.AbstractTransaction.do_prepare(AbstractTransaction.java:170)
... 90 more
Caused by: com.sap.glx.core.kernel.trigger.TriggerLockingException: Cannot acquire read row lock for after image (key = Instance_0_TaskHelloWorld2_ac33d162fa908f8198b3c740708bb6c5{919e4f45-1581-11df-b4f9-02004c4f4f50}(Instance_0_bpmboundary_new_24449a1f1a041ff7cd7deb8d764c6405{0d4c2925-157b-11df-b84e-02004c4f4f50}(?),null,Token_0_bpmboundary_new_24449a1f1a041ff7cd7deb8d764c6405{917829a3-1581-11df-b6e0-02004c4f4f50}(?),false), name = JOIN_CompletionDeadlineWithRealDelayConditionalSequenceConnector_context_join_0_69)
at com.sap.glx.core.kernel.trigger.node.LockingTreeJoinNode.lockAfterRow(LockingTreeJoinNode.java:308)
at com.sap.glx.core.kernel.trigger.node.LockingTreeJoinNode.process(LockingTreeJoinNode.java:636)
... 94 moreHi,
sounds like an program error. That is an problem which occurs if one or multiple components try to lock the same galaxy object at the same point in time. Did you configured something special on the given task? e.g deadlines?
My proposal is to open an Customer Message so that we can have a detailed look onto the system. If this is not possible could you please provide the complete trace file and some more details about the modeled task?
Best Regards
Andreas -
10)example of errors while loading data and how do u resolve them?
)example of errors while loading data and how do u resolve them?
hai ram reddy this is ramprasad reddy....u can get this type of most commen errors....like below
As the frequent failures and errors , there is no fixed reason for the load to be fail , if you want it for the interview perspective I would answer it in this way.
a) Loads can be failed due to the invalid characters
b) Can be because of the deadlock in the system
c) Can be becuase of previuos load failure , if the load is dependant on other loads
d) Can be because of erreneous records
e) Can be because of RFC connections.....(sol: raise the ticket to BASIS team to provide the connection)
f)can be coz of missing master data.
g)can be coz of no data found in the source system.
h)Time stamp error........(sol: activate the data source and replicate the data source and load)
i)Short dump error.........(sol: delete the request and load once again)
j)Data locking when loading in parallel.
k)ODS activation failures.
l)No SID found........(sol: should load masterdata before transaction data) -
Error while checking in and storing
Dear All
I am trying to attaching a file using CV01n, when i am doing for check in - i am getting following error message
Error while checking in and storing
Message no. 26253
What may be the issues, even my my repositories working fine ( configured contentserver, status is active)
Regards
chandraDear Chandra,
please check in transaction OACT if the storage category is assigned to the correct content repository. Further please read also through notes 707568 and 833576.
Best regards,
Christoph -
Web Analysis Error -- Error while executing query and retrieving data
Regarding Web Analysis:
We have a number of reports that we created. yesterday they were all working fine. today we try to open them and most are generating an error.
The error is:
Error while executing query and retrieving data.; nested exception is:
com.hyperion.ap.APException: [1033] Native:
1013033[Thu Oct 22 09:08:17
2009]server name/application name/database name/user name/Error91013033)
ReportWriter exit abnormally
Does anyone have any insight into what is going on?
My version information is:
Hyperion System 9 BI+ Analytic Administration Services 9.3.0.1.1 Build 2
Web Analysis 9.3.0.0.0.286
Thanks in advance for your help.
DaveWHi,
And also click on check option by opening the query in Query designer,as Mr . Arun suggested.
And if you get any error in checking, see the long message(detail).
With rgds,
Anil Kumar Sharma .P -
Fiori Error while creating catalog and Group in Fiori Launchpad
Hi ,
We are getting following error while creating Catalog and Groups in Fiori Launchapd:
Error (500, Internal Server Error) in OData response for GET "/sap/opu/odata/UI2/TRANSPORT/CustomizingRequests?$filter=isDefaultRequest%20eq%20true": HTTP request failed
Details: Model 'ZTRANSPORT_MODEL_0001_BE' contains errors. Contact Adminstrator
Regards,
Trilochan
Message was edited by: Michael ApplebyHi Trilochan,
Have you assigned transport request? Select the config icon at right top.
Creating Transport Requests for User Changes - User Interface Add-On for SAP NetWeaver - SAP Library
Also look at SAP Fiori - UI Add-on SP09 update troubleshooting
Regards, Masa
SAP Customer Experience Group - CEG -
Error while checking in and storing: C:\Documents and setting*
hI,
I hace install the content server and i made content repository also.
everything I made on development server, and the original application file is getting check in also.
now when I tried to check in it in test sever, it giving me error like Error while checking in and storing: C:\Documents and setting
I transported all request like content repository and all to test server from development server.
regards,
nitinHi, Nithin,
Check this also in development
In your local machine Goto
C:\windows\system32\drivers\etc
There will be file called "hosts"
in that file plz specify the IP of the content server.
Eg;
<IP address> <Content server name>
102.210.23.186 My Content server
Save the file.
Restart the machine and then try check-in the file in content server.
Regards,
Ben -
Error while checking in and storing document in storage category
Dear Consultants,
When i am trying to save a document in storage category thru tcode cv02n, its giving me error:-
Error while checking in and storing document "c:/desktop/content.doc",
while there is no error in csadmin and OAC0 tcode repository is in running status
even output of
dbmcli db_enum
OK
SDB /sapdb/SDB/db 7.6.03.09 fast running
SDB /sapdb/SDB/db 7.6.03.09 quick offline
SDB /sapdb/SDB/db 7.6.03.09 slow offline
SDB /sapdb/SDB/db 7.6.03.09 test offline
URL "http://192.168.2.11:1090/ContentServer/ContentServer.dll?serverInfo"
output :-
serverType="SAP HTTP Content Server";serverVendorId="SAP AG";serverVersion="640";serverPatch="7";serverBuild="23";pVersion="0046";serverStatus="running";serverDate="2011-12-14";serverTime="10:01:44";startUpDate="2011-12-14";startUpTime="06:36:18";lastAccessDate="2011-12-14";lastAccessTime="09:57:59";
contRep="ZCONT_TEST";contRepStatus="data(0%) log(191655552%)";pVersion="0046";storageVersion="17";storage="SAPDB";buildLevel="1";contentStorageName="SDB";contentStorageHost="localhost";security="1";contRepDescription="test content repositry";driver="MaxDB";defaultDocProt="";
contRep="ZDMS_C1";contRepStatus="data(0%) log(191655552%)";pVersion="0046";storageVersion="17";storage="SAPDB";buildLevel="1";contentStorageName="SDB";contentStorageHost="hpsebdev1";security="1";contRepDescription="Database storage documents";driver="MaxDB";
Please Help regading the issue
Regards
Gagan Sharma
Basis ConsultantHi,
Please revisit your DMS configuration. May be something is missing out in the configuration.
Additionally you can retry to chekin by changing the following parameter
security = 0.
Hope this is useful.
Regards,
Deepak Kori -
Error while checking in and storing: C:\Documents and Settings
Hi,
i have some problem in DMS , while doing Check in process after attaching documents in CV01n.
geeting error like "Error while checking in and storing: C:\Document and Settings.."
please suggest me how to solve this problem.
thx in advance...
Karthik.Hi Karthik,
There may be several factors contributing to this error.Some of these maybe:
-Storage category defined improperly/missing
-HTTP/FTP destination missing
-Incomplete Workstation application definition
-Incomplete Authorization
Please run through/search for each of these issues (discussed several times in the forum) and adopt corrective action wherever necessary.
Regards,
Pradeepkumar Haragoldavar -
Dear All,
I am working in an environment :
SAP ECC 6.0
Content server Version 6.4
I configured Content Repository, Content Category & Document Area in KPro.
I tried to test connection in OAC0, I am getting the message "Connection test for content repository XXXXXXXXXXXX was successful".
But when I tried to check in the docs in CV01N and while saving the DIR I am getting the error "Error while checking in and storing: C:\ ..... (Message no. 26253)".
Same time I can able to check in the docs to SAP DB.
Plz share your views to sort out my Issue.
Thanks & Rgds,
Sukan
[email protected]Hello David,
I assume you’re using windows contentserver.
sounds like a problem with the parameter maxAllowedContentLength of ISS.
Default value would be 30 MB
Check the limit:
C:\windows\system32\inetsrv\appcmd list CONFIG -section:requestFiltering
Set limit to 4 GB:
c:\windows\system32\inetsrv\appcmd set config -section:requestFiltering -requestLimits.maxAllowedContentLength:4294967295
resatart ISS and try again.
Best Regards
Andreas -
Error while checking in and storing: C:Userscbt.abapDesktopLOP.XLS
Dear Friends,
I am trying to save the documnet in content server but getting the below error:
Error while checking in and storing: C:\Users\cbt.abap\Desktop\LOP.XLS
Message no. 26253
I hv checked CSADMIN certificate , is activated
In DC20 - i hv maintained data carrier type as PC for front end
and i hv all the authorizations, still I am getting this error
pl check and tell the steps to solve this issue.
regards,
Atul TulaskarHi Atul,
please see the information under http://wiki.sdn.sap.com/wiki/display/PLM/26253-Reasonforthiserror which should be useful to find out more about possible reasons for this error message.
Best regards,
Christoph -
Hi all,
I'm getting the following Error while checking in original to Content Server
"Error while checking in and storing: C:\Documents and Settings\user\Desktop" Message 26253
OAC0, OACT, CSADMIN settings seems to be Ok .
Settings in DMS SPRO - in dc10, dc20(data carrier used PC)- everything fine
-Authorization issues are not there
Earlier checking in was possible with same settings, but now we are getting this error.
From my end i had test the RFC Connection (SAPFTP, SAPFTPA, SAPHTTP, SAPHTTPA) through SM59 and its test run was successful. So the possibilty of RFC Failure was ruled out.
I knew this problem was arised as there is some issue in Content Repository, but not able to trace it out.
If any one knew what to do in this case, then let me know.
Secondly, what are the things need to be checked to identify the content repository Checking in Issue.
Regards,
S AnandError Resolved.
I had only executed the below command
./dbmcli on SDB>db_execute SET LOG AUTO OVERWRITE ON
OK
seems like Log file was full. but now its working.
Thanks for your suggestion.
Regards
S Anand
Maybe you are looking for
-
Cant draw in flash pro cc on surface pro 3 with latest n-trig wintab drivers. Many others online say they have this issue on surface pro 3 also...Is there not some type of current fix. Someone on the adobe forums said the problem was fixed internally
-
using the Xslt mapping how the sql query is generated. I have used all the required fields. Thanks, srini
-
Load frames conform mouse position
Hi. Look this site: www.perpendicular.tk This site use javascript to show image by image. It is not a 3D model, only images are showed one by one in relation position mouse. In actionscript, how Can I make this? I think that I need start putting the
-
Adding More than 30 Blank Pages in Editor
I have never had any trouble adding more than 30 blank pages in Photoshop Editor. Usually on page 29 or 30 instead of clicking add a blank page I'll click the option underneath it to add a blank page using that layout and it'll let me make blank pag
-
my class has been given dvd's with files on them. The DVD shows up as a blank disc on my new macbook pro, even though other macs in the room do not have this issue...please help me!