Error while deleting the Data Source

Hi gurus,
I am getting an error while deleting a Data Source - "Source system XXXXX  not found RSAR205".
but that source system no more available.
Is there any way to delete the Data Source.
Thanks in advance.
CK.

Hi,
That source system deleted.
Using RSDS also same error.
Thanks,
CK
Edited by: CK on Oct 3, 2008 11:37 AM

Similar Messages

  • Error While Activating the Data Source in RSA5 T-Code

    Hi,
    When i tried to inactive the data source in 2lis_11_vahdr it shows "Data Source does not exists errror".
    So i went to RSA5 T-Code and tried to activate the data source but there it is throwing the error like "Event with errors Extract in Data Source 2LIS_11_VAHDR".
    I have checked the above thing with all the data sources every one are throwing the same errors. Can any one please suggest me how to solve the issue.
    Or Is this issue related to Basis People?.
    Regards,
    Kumar.

    Hi Ravi,
    1.When i tried to inactive the data source  in  LBWE T-Code the error is "Data Source 2lis_11_vahdr does not exists ".
    2. In RSA5 T-Code  while activating the data source the error is  "Event with errors Extract in Data Source 2LIS_11_VAHDR".
    Regards,
    Kumar.

  • Error while activating the data source.

    Dear all,
    We are using the BI version 7.00 - i have a problem i.e., while creating the infopackage for the data source
    0PM_OM_OPA_2 the following error is displayed.
    "No active transfer rule for DS 0PM_OM_OPA_2 and ....source system CLNTDEV400; create first..."
    Moreover the data source is found to be in version "M" - while activating the same when in click on the display/change icon , the following error is popped up.
    "You can only edit 3.x DataSources using transfer rule
    maintenance Do you want to create the transfer rules now?"
    What could be the reason for this error. What are the things that are to be done to replicate the data and pull data?
    Valid experts comment is expected in this regard.
    Regards,
    M.M

    Hi Magesh,
    Replicate your data source in BW and then right click onit and choose Assign Info source, it may take you to BC wherein you may need to install the Transfer Rules and related info objects etc.... Once you maintain this data source in the source system then you can create an info pack withput any extra effort.
    Hope it helps..

  • Error while Replicating the Data Source in Quality System....

    Dear Expert,
       I have created a generic data source in R/3 Dev system and I replicated the data source to BW DEV system.  Everything is fine in DEV system.
    I have transported the Data Source to R/3 Quality System. And transported the related  objects in BW DEV system to BW QUALITY system.
    Now I am getting the error as follows :
    BW QUA System --> RSA1 --> Source System --> Data source Overview --> Sales & Distribution --> _REPLICATE_
    *DATASOURCE*.( clicked )
    Its moving to another screen (R/3 QUALITY) , but it is coming as a LOGIN screen. Its askong for the USER name and Password. And when I click on BACK button , its givin following pop-up
    RFC connection to source system LOGSYS is damaged  ==> no Metadata upload
    What could be the issue ?? Please suggest.
    Thanks,
    Sanjana

    Hi saveen,
    Yes I transported in that manner.
    I checked in Source System ( RSA13):
    Its giveng the pop-up  ,
                                    RFC connection check failed. Check connection
    Please suggest, how can I proceed ?
    Thanks,
    Sanjana

  • Error while deleting the data from DSO

    Hi Experts
    I am getting the ABAP Dumps when I am trying to delete the data from the DSO Objects in my Systems.
    "    An entry was to be entered into the table                                                    
         "\FUNCTION=RSAR_ODS_GET\DATA=L_TH_ISOSMAP" (which should have                               
        had a unique table key (UNIQUE KEY)).                                                        
        However, there already existed a line with an identical key.                                                                               
    The insert-operation could have ocurred as a result of an INSERT- or                         
        MOVE command, or in conjunction with a SELECT ... INTO.                                                                               
    The statement "INSERT INITIAL LINE ..." cannot be used to insert several                     
         initial lines into a table with a unique key.     "
    I have tried with multiple DSO's and Have the same issue. Please need your suggestions.
    Regards,
    Mahesh

    Hi......
    I think in the ODS setting Unique Data Records checkbox is ticked........if so.........The DataStore object can be used for loading unique data records...........If the loaded request does contain data that is already in the DataStore object, activation of the request will lead to an error.
    Find the request in SE16>>RSICCONT table .........and try to delete there....it may work........
    Check this.....
    u2022 Note 1007717 -Deleting from Data Store object: Termination w/o log
    u2022 Note 998704 - Deleting req from DataStore obj: Status at end of processing
    u2022 Note 1037507 - System Termination when you delete from DataStore objects
    Regards,
    Debjani.....

  • Error while creating the data source

    hi
    iam creating generic data source using function module.
    i inserted the function module and structure name,
    when i press the save button, it is throwingerror message as Units field WAERS for field ANSWT of DataSource ZEQUIP_DS is hidden.
    please guide me how can i overcome this
    treat this is as urjent requirement
    regards
    kumar

    The error message is explicit the WAERS field is hidden...you must edit the datasource structure in RSO2 and uncheck the "hidden" checkbox for that field....
    It will solve your problem...
    Regards

  • Error while tansporting the Data Source & Transformation

    Dear Experts,
    I stuck in one problem. I just tried to transport one data source & its transformation fron BWD to BWQ. After importing the request, it throws an error (mentioned below):
    Start of the after-import method RS_RSDS_AFTER_IMPORT for object type(s) RSDS (Activation Mode)
    Password logon no longer possible - too many failed attempts
    Error when activating DataSource ZMAT_MAPVL RQ1CLNT400
    Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
    No rule exists
    Source RSDS ZMAT_MAPVL RQ1CLNT400 does not exist
    Also i check the same data source on R/3 system where it is available in activated form. I also replicate the same & tried to transport it again on BWQ but still the same.
    Please help me out.
    Thanks in advance
    Neha

    Hi,
       Did you check the 'Conversion of logical system names' option?, whether your source is mapped to correct R3 system?. If not please check and map with the correct R/3 Quality system and sometimes there may be more than one R/3 system connected to quality, if so remove the wrong one.
    For Password logon no longer possible, please check your RFC connection(SM59) by selecting the option Remote logon, it shd give you the error. As background user got locked it seems. Please check.
    Thanks,
    V.Senthil
    Edited by: Senthilkumar Viswanathan on May 10, 2011 7:21 AM

  • Error while changing the data source at runtime

    Hi All,
    I want to change the DB connection(from Dev to QA) in the code before viewing it to the user. I browsed through the samples and found a code. But when I', trying to use the code, I'm getting the following error.
    com.crystaldecisions.sdk.occa.report.lib.ReportSDKLogonException: Logon Error: invalid arguments in call---- Error code:-2147217393 Error code name:dbLogonFailed
    The following is the code:(Bold - problem area)
    private static void switch_tables(DatabaseController databaseController) throws ReportSDKException {
    final String DBUSERNAME = "irs_tin";
    final String DBPASSWORD = "monica30";
    final String SERVERNAME = "n3qvdb999.1dc.com";
    final String CONNECTION_STRING = "Use JDBC=b(true);Connection URL=s(oracle.jdbc.OracleDriver://n3qvdb999.1dc.com:1631);" +
                                                       "Database Class Name=s(oracle.jdbc.OracleDriver);Server=s(n3qvdb999.1dc.com);" +
                                                       "User ID=s(irs_tin);Password=;Database=s(IRSQA);Trusted_Connection=b(false);" +
                                                       "JDBC Connection String=s(!oracle.jdbc.OracleDriver!jdbc:oracle:thin://n3qvdb999.1dc.com:1631;" +
                                                       "DatabaseName={database};user=;password=!)";
    final String DATABASE_NAME = "IRSQA";
              final String URI = "!oracle.jdbc.OracleDriver!jdbc:oracle:thin://n3qvdb999.1dc.com:1631;DatabaseName=;user=;password=!";
              final String DATABASE_DLL = "crdb_jdbc.dll";
              Tables tables = databaseController.getDatabase().getTables();
    for (int i = 0; i < tables.size(); i++) {
    ITable table = tables.getTable(i);
                   //Keep existing name and alias.
                   table.setName(table.getName());
                   table.setAlias(table.getAlias());
    IConnectionInfo connectionInfo = table.getConnectionInfo();
    PropertyBag propertyBag = new PropertyBag();
    propertyBag.put("Trusted_Connection", "false");
                   propertyBag.put("Server Name", SERVERNAME); //Optional property.
                   propertyBag.put("Connection String", CONNECTION_STRING);
                   propertyBag.put("Database Name", DATABASE_NAME);
                   propertyBag.put("Server Type", "JDBC (JNDI)");
                   propertyBag.put("URI", URI);
                   propertyBag.put("Use JDBC", "true");
                   propertyBag.put("Database DLL", DATABASE_DLL);
                   connectionInfo.setUserName(DBUSERNAME);
                   connectionInfo.setPassword(DBPASSWORD);
                   connectionInfo.setKind(ConnectionInfoKind.SQL);table.setConnectionInfo(connectionInfo);
    databaseController.setTableLocation(table, tables.getTable(i));
    Thanks for your time.

    Hi Guys,
    I managed to fix my problem.
    I have used the method in the utility class at this location:
    http://code.google.com/p/struts2demos/source/browse/trunk/Struts_Demo_ThirdDemo/src/com/businessobjects/samples/JRCHelperSample.java?r=4
    -Anil

  • Error while deleting the Master data

    Hi Friends,
    i am getting the below error while deleting the data from a master data:-
    The system is unable to delete all of the specified master data,because some of it is still in use. (See log:Object RSDMD, sub-object MD_DEL )
    Do you want to delete the data records that are no longer in use?
    Could you guide how should i proceed to delete the data.
    Regards,
    Hirdesh

    Hi Hirdesh,
        If you are using master data in someother data targets u cant delete master data.So first you have to delete the data in data targets where this particual master data object is used, then remove the data in master data object.
    Regards
    Prasad

  • While creating the Data source for Sql server am getting this error?

    Hi i new to Power BI sites and office 365,
    For my first step 
    1. i have successful creaeted Gateway in Office 365
    2.Now i have creating  the Data source for that gateway using Sql server R2
    3.While Creating the Data source using the Corresponding gateway i have given and next phase set Credentials  phase i have noticed one pop up window and it will shows me like
    Data source Settings and  below in that window it will show's u the things like 
    Datasource Name.
    Loading......
    Credentials type:
    Privacy Level:
    Failed to verify parameter
    I will get this results finally  ,so hw should i achive this probelm ,Please let me know if any one knows
    So kindly give me the proper answer for this.
    Regards

    Any suggestions for Chinnarianu?
    Thanks!
    Ed Price, Azure & Power BI Customer Program Manager (Blog,
    Small Basic,
    Wiki Ninjas,
    Wiki)
    Answer an interesting question?
    Create a wiki article about it!

  • Error while loading the data from PSA to Data Target

    Hi to all,
         I'm spacing some error while loading the data to data target.
    Error :  Record 1 :Value 'Kuldeep Puri Milan Joshi ' (hex. '004B0075006C0064006500650070002000500075007200690
    Details:
    Requests (messages): Everything OK
    Extraction (messages): Everything OK
    Transfer (IDocs and TRFC): Errors occurred
          Request IDoc : Application document posted
          Info IDoc 2 : Application document posted
          Info IDoc 1 : Application document posted
          Info IDoc 4 : Application document posted
          Info IDoc 3 : Application document posted
          Data Package 1 : arrived in BW ; Processing : Data records for package 1 selected in PSA - 1 er
    Processing (data packet): Errors occurred
          Update PSA ( 2462  Records posted ) : No errors
          Transfer Rules ( 2462  -> 2462  Records ) : No errors
          Update rules ( 2462  -> 2462  Records ) : No errors
          Update ( 0 new / 0 changed ) : Errors occurred
          Processing end : Errors occurred
    I'm totally new to this issue. please help to solve this error.
    Regards,
    Saran

    Hi,
    I think you are facing an invalid character issue.
    This issue can be resolved by correcting the error records in PSA and updating it into the target. For that the first step should be to identify if all the records are there in PSA. You can find out this from checking the Details tab in RSMO, Job log , PSA > sorting records based on status,etc. Once its confirmed force the request to red and delete the particular request from the target cube. Then go to PSA and edit the incorrect records (correcting or blanking out the invalid entries for particular field InfoObject for the incorrect record) and save it. Once all the incorrect records are edited go to RSA1>PSA find the particular request and update to target manually (right click on PSA request > Start update immediately).
    I will add the step by step procedure to edit PSA data and update into target (request based).
    In your case the error message says Error : Record 1 :Value 'Kuldeep Puri Milan Joshi '. You just need to conver this to Capital letter in PSA and reload.
    Edit the field to KULDEEP PURI MILAN JOSHI in PSA and push it to target.
    Identifying incorrect records.
    System wont show all the incorrect records at the first time itself. You need to search the PSA table manually to find all the incorrect records.
    1. First see RSMO > Details > Expand upate rules / processing tabs and you will find some of the error records.
    2. Then you can go to PSA and filter using the status of records. Filter all the red requests. This may also wont show the entire incorrect records.
    3. Then you can go to PSA and filter using the incorrect records based on the particular field.
    4. If this also doesnt work out go to PSA and sort (not filter) the records based on the particular field with incorrect values and it will show all the records. Note down the record numbers and then edit them one by one.
    If you want to confirm find the PSA table and search manually."
    Also Run the report RS_ERRORLOG_EXAMPLE,By this report you can display all incorrected records of the data & you can also find whether the error occured in PSA or in TRANSFER RULES.
    Steps to resolve this
    1. Force the request to red in RSMO > Status tab.
    2. Delete the request from target.
    3. Come to RSMO > top right you can see PSA maintenace button > click and go to PSA .
    4.Edit the record
    5. Save PSA data.
    6. Got to RSA15 > Search by request name > Right click > update the request from PSA to target.
    Refer how to Modify PSA Data
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40890eda-1b99-2a10-2d8b-a18b9108fc38
    This should solve your problem for now.
    As a long term you can apply some user exit in source system side or change your update rules to ensure that this field is getting blanked out before getting loaded in cube or add that particular char to permitted character list in BW.
    RSKC --> type ALL_CAPITAL --> F8 (Execute)
    OR
    Go to SE38 and execute the program RSKC_ALLOWED_CHAR_MAINTAIN and give ALL_CAPITAL or the char you want to add.
    Check the table RSALLOWEDCHAR. It should contain ALL_CAPITAL or the char you have entered.
    Refer
    /people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
    /people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
    /people/aaron.wang3/blog/2007/09/03/steps-of-including-one-special-characters-into-permitted-ones-in-bi
    http://help.sap.com/saphelp_nw04/helpdata/en/64/e90da7a60f11d2a97100a0c9449261/frameset.htm
    For adding Other characters
    OSS note #173241 – “Allowed characters in the BW System”
    Thanks,
    JituK
    Edited by: Jitu Krishna on Mar 22, 2008 1:52 PM

  • Error while deleting master data (Message no. RSDMD118)

    Dear all,
    I am performing a test to create and delete new Company Codes in Consolidation Workbench.
    Creation of new Company Codes went on successfully but deleting them give me the following error message upon saving:
    Error while deleting master data
    Message no. RSDMD118
    Since they are new Company Codes, they have not been used and stored in any BW cubes. Any idea on why BCS prevents me from deleting them?
    Appreciate assistance to troubleshoot and resolve this error.
    Thank you.

    Thank you both for your replies.
    I am sure those are not the case here as I deleted the Company immediately after creating it.
    Just to make sure, I performed "Where-Used List" again and BCS confirmed that it is not being used anywhere:
    Use of: Company UAT1 UAT Company 1
    Number of Uses Found: 0 
    However, the same error message was displayed again after I tried to delete the Company and save the configuration. Still can't find any solid reason behind this.

  • Error While deleting the Profit Center

    Hi I am getting the below error while  deleting the Profit center. Please help me how to fix this issue...
    Profit center Scenario was activated in New GL Accounting
    what configurations do i need to change to fix this error? Kindly advise me..
    Thanks
    Kishore

    Dear,
    while deleting  the profit center we have to requrie follow the steps
    1) OBR1 - Reset Transaction data
    2)OBR2 - Reset the master data
    3)OKKS - Set Controlling Area
    4)OKC3 - Delete Transcation Data
    5) KL14 - Delete Activity Types
    6)OKE5 - Profit center De - Active
    7)OKE1 - Profit center Transcation data delete
    8)OKE2 - profit center delete
    if if you follow above steps easily we can make the delete the profitcenter and we donot have to activate profitcenter
    i hope solve you r problem
    With regards /G chandu

  • Error while extracting the data in R/3 production system,

    Hi Team,
    We got the following error while extracting the data in R/3 production system,
    Error 7 When Sending an IDoc R3 3
    No Storage space available for extending the inter 44 R3 299
    No storage space available for extending the inter R3 299
    Error in Source System RSM 340
    Please guide us to fix the issue

    It´s very difficult to help you without knowing
    - what is going to be transferred
    - where you get this error
    - system configuration
    - actual memory usage
    - operating system
    - database and configuration etc. etc.etc. etc.
    I suggest you open an OSS call and let the support have a look on your system. It´s much easier if one has system access to find out the cause for that problem.
    Markus

  • While deleting the data from cube..getting the following erros...

    while deleting the data from cube the below error occured in develoment..any help
    i have 4 requets.....2 are deltedd but no records for those...
    2 are not deleted and they have some data..
    please give me u r inputts pelase
    Performing check and potential update for status control table
    Message no. RSM1490
    Diagnosis
    If data is loaded into an InfoCube, or existing data is edited (aggregated/compressed/deleted/got from a DataMart), then there is a change in  the potential reportability of the data , or the possibility of deleting data by request, or of aggregating or compressing.
    This status of each one of these Cubes is stored in a status table, that is updated when there is any change to the status of a request in the Cube.
    The system now analyzes the requests in the Cube and compares the calculated status with the status table.
    If deviations from the status table arise then you are given the option of adjusting the status table.
    System Response Procedure Procedure for System Administration

    Hi,
    Did you tried by right click on cube and delete data? are those requests are compressed or roll up?

Maybe you are looking for

  • Recovering Data from a Back-up

    So I just recently dropped my iPhone into a gutter full of water. Yes it ***** but I'm over it (mostly). Now I know each time you update the software it makes a backup copy of your iphone. Is there anyway to retrieve all that data? If I buy a new iPh

  • Would like file sizes in windows to recalculate always

    Friends: I'm using OS X 10.4.10 and would like the size of each file to update on any window I open. As it stands only some folders have sizes. Ive got my View options set to calculate sizes for all windows, but when I return a few days later this op

  • Lighroom to Photoshop problem in Creative cloud!!!

    Today I'll tryed to open Photoshop and it says "Error: 1, please uninstall and install application again". I uninstalled and installed it and after that trying to open photo/photos from Lightroom to Photoshop and found it does not work anymore. Photo

  • JScrollPane should scroll to max automaticly

    By default the JScrollBar (in a JScrollPane) stays at the current value when the viewport is extended. How can I set the JScrollBar that it is at the max value when something ist insertet (So that I don't have to scroll down manually)? Thanx Martin

  • Intial Context and lookup tunning ?

    Doing a inital context and lookup for an EJB for every user in my webapp takes a lot of time, is there any tunning that can be done,can i get the Home Handle and put it in Application scope and have subsequent users reuse it ? Any examples or ideas w