Error while deleting the Products from TOP N List
Hi ,
I have been using FM "CRM_PRP_PROD_I_UPDATE_DU" to delete products from the TOP N List but while executing i am getting an error "Error upon posting object 'PRP_PROD_I' / table CRMM_PRP_PROD_I'". Kindly let me know where am i going wrong.
Thanks & Regards,
Shwetha.
Hi......
I think in the ODS setting Unique Data Records checkbox is ticked........if so.........The DataStore object can be used for loading unique data records...........If the loaded request does contain data that is already in the DataStore object, activation of the request will lead to an error.
Find the request in SE16>>RSICCONT table .........and try to delete there....it may work........
Check this.....
u2022 Note 1007717 -Deleting from Data Store object: Termination w/o log
u2022 Note 998704 - Deleting req from DataStore obj: Status at end of processing
u2022 Note 1037507 - System Termination when you delete from DataStore objects
Regards,
Debjani.....
Similar Messages
-
Error while deleting the data from DSO
Hi Experts
I am getting the ABAP Dumps when I am trying to delete the data from the DSO Objects in my Systems.
" An entry was to be entered into the table
"\FUNCTION=RSAR_ODS_GET\DATA=L_TH_ISOSMAP" (which should have
had a unique table key (UNIQUE KEY)).
However, there already existed a line with an identical key.
The insert-operation could have ocurred as a result of an INSERT- or
MOVE command, or in conjunction with a SELECT ... INTO.
The statement "INSERT INITIAL LINE ..." cannot be used to insert several
initial lines into a table with a unique key. "
I have tried with multiple DSO's and Have the same issue. Please need your suggestions.
Regards,
MaheshHi......
I think in the ODS setting Unique Data Records checkbox is ticked........if so.........The DataStore object can be used for loading unique data records...........If the loaded request does contain data that is already in the DataStore object, activation of the request will lead to an error.
Find the request in SE16>>RSICCONT table .........and try to delete there....it may work........
Check this.....
u2022 Note 1007717 -Deleting from Data Store object: Termination w/o log
u2022 Note 998704 - Deleting req from DataStore obj: Status at end of processing
u2022 Note 1037507 - System Termination when you delete from DataStore objects
Regards,
Debjani..... -
Error while deleting the Master data
Hi Friends,
i am getting the below error while deleting the data from a master data:-
The system is unable to delete all of the specified master data,because some of it is still in use. (See log:Object RSDMD, sub-object MD_DEL )
Do you want to delete the data records that are no longer in use?
Could you guide how should i proceed to delete the data.
Regards,
HirdeshHi Hirdesh,
If you are using master data in someother data targets u cant delete master data.So first you have to delete the data in data targets where this particual master data object is used, then remove the data in master data object.
Regards
Prasad -
Error while deleting the agreement
Hi,
I am facing the following error while deleting the agreement.
There was an error deleting agreement.
Error -: AIP-16015: Delete of Internal Delivery Channel Usage failed with error: Cannot delete Internal Delivery Channel Usage which is referenced by Participant Delivery Channel
Error -: AIP-16011: Cannot delete Internal Delivery Channel Usage which is referenced by Participant Delivery Channel
We are getting the same error while deleting the individual TP participants from the agreement.
I don't have any agreements deployed on the B2B.
Can you please let me know the reason for this error?
Regard,
Ravi ShahPlease refer B2B Error:- AIP-16015 and AIP-16016 when deleting a TP Agreement
-
Error while deriving the currency from table T001P.
Hi Friends,
I am trying to run payroll for NZ using schema NZ00 but i am getting an error stating "Error while deriving the currency from table T001P. Error during initialization of Payroll"
I have checked V_T001P, V_T001 and have deleted the personnel area and subarea and again created it but still i am unable to solve this problem.
Could you please help me as to where this error can be corrected.
Thanks,
ManjAbout the incidence, the problem might be related to the links between
personnel area, company code and currency set up (table T001P, T500P and
T001).
Please check the following points:
1- Have you assigned the Personnel area to the Company code under SPRO -
IMG -> Enterprise Structure -> Assignment -> Human Resource Management
-> Assignment of Personnel Area to Company Code.
2- SPRO -> Personnel Management -> Personnel Admin -> Basic Settings ->
Determine Currencies (Public Sector Currency Need to be maintained along
with the other node).
3- SPRO- Personnel Management -> Personnel Admin -> Payroll Data ->
Basic Pay -> Define Hourly Rates for several decimal places. (Please
maintain all the nodes).
4- Maintaining the table t500c through transaction code OE00.
Regards
Ramana -
While deleting the data from cube..getting the following erros...
while deleting the data from cube the below error occured in develoment..any help
i have 4 requets.....2 are deltedd but no records for those...
2 are not deleted and they have some data..
please give me u r inputts pelase
Performing check and potential update for status control table
Message no. RSM1490
Diagnosis
If data is loaded into an InfoCube, or existing data is edited (aggregated/compressed/deleted/got from a DataMart), then there is a change in the potential reportability of the data , or the possibility of deleting data by request, or of aggregating or compressing.
This status of each one of these Cubes is stored in a status table, that is updated when there is any change to the status of a request in the Cube.
The system now analyzes the requests in the Cube and compares the calculated status with the status table.
If deviations from the status table arise then you are given the option of adjusting the status table.
System Response Procedure Procedure for System AdministrationHi,
Did you tried by right click on cube and delete data? are those requests are compressed or roll up? -
Error While deleting the Profit Center
Hi I am getting the below error while deleting the Profit center. Please help me how to fix this issue...
Profit center Scenario was activated in New GL Accounting
what configurations do i need to change to fix this error? Kindly advise me..
Thanks
KishoreDear,
while deleting the profit center we have to requrie follow the steps
1) OBR1 - Reset Transaction data
2)OBR2 - Reset the master data
3)OKKS - Set Controlling Area
4)OKC3 - Delete Transcation Data
5) KL14 - Delete Activity Types
6)OKE5 - Profit center De - Active
7)OKE1 - Profit center Transcation data delete
8)OKE2 - profit center delete
if if you follow above steps easily we can make the delete the profitcenter and we donot have to activate profitcenter
i hope solve you r problem
With regards /G chandu -
Error while creating the product group by MC84
Hello Friends,
I am creating the product group by MC84, and in product group field i have given the product group name i.e P2345, and its description i.e product group for waluj, plant i.e cw01 and Base unit i.e KG.Now when i press enter system is throwing the error"The field is defined as the required field;it doesnot contain an entry."Message no.MG144.And with this error system is placing the cursor on product group field.As i have already given product group name than also system is throwing the error.
Though i know the alternative method to create product group by MMO1 and selecting the material type PROD, then also i want to know why system is throwing the error while creating the product group by MC84.
Please guide.Dear,
This message says that you have not entered a mandatory field.Enter proper values for all mandatory fields and then you will not get this error.
Try to create the product group as material of material type"PROD"
Then you go on adding the memebers in SOP Transaction.
In some of the versions of SAP it is the problem.
I have also faced this problem in some versions.
Regards,
R.Brahmankar -
Serial number error while creating the production order
Hello frds,
I am getting the following error while creating the production order.
"Item 000000 requires exactly 100 serial numbers for the asset".
If i give 100 serial numbers in the order, the error is solved. But i do not want to assign 100 serial numbers, i want to assign only 2 numbers.
I have tried using the new serial number profile also, but it is giving same error.
Kindly guide.
Regards,
Narendra BoraDear Narendra
Select the serial number profile and go to serialization procedure and set the ser. usage status 02 - Optional as below.
Procd Procedure description Ser.Usage
PPRL PP order release 02
since the serail number creation is optional for order relase this will allow you to relase with out error and with serail number assigned in partial.
Regards
Soundar -
Error While saving the Production Order
Dear Experts
Pls let me know why am getting the below error while saving the production order after release..
PSFC_STD_LAYOUT does not exist
Message no. SSFCOMPOSER004Dear,
Please check have you assigned the scheduling profile in work scheduling view of materail master?
Then go to OPKP check the same scheduling profile where you have activited the On realese execute printing remove this tick mark and then try with new order.
Or you can do the configuration in Tocde :OPK8 here assign the PSFC_STD_LAYOUT in forum.
Regards,
R.Brahmankar -
Hi there,
When I'm trying to manage spaces in SAP Business Objects Explorer 4.1 SP04, I'm getting the following error:
Failed to retrieve the data source list.
There was an error while retrieving the universes from the CMS (Central Management Server). (PS 20003)
For input string: "false"
I've already restart Explorer servers (Explorer Exploration Server, Explorer Indexing Server, Explorer Master Server and Explorer Search Server) and rebooted the server where Explorer is installed.
Nothing seems to fix this error message. I'm not able to create new spaces because I cant access the sources:
I'd appreciate some help !
Thanks in advanceHI Pavan,
Admin is on the Administrators Group, which as Full Control on the Explorer Application
I think this worked on the day the Explorer was installed (past week).
Since them never worked. -
No data Exists error while retrieving the data from a table
Hi Everyone!
I am getting "No Data Exists" error while retrieving the data from a table....where i need to check...if possible please give me example link.....please help me regarding thisHi !
thanks for ur response...
I have written vo.executeQuery for the table...My page is running but i m not getting the data....I have to select two LOV's and when I click on Go button the data has to display in the table...After the selection of LOV's when I click on Go in the table "No data exists" message is appearing...the table has the data and the query is also executing...please give info where i did the mistake.... -
Error while deriving the currency from table
i am getting the below error while simulating the payroll for india.
Error while deriving the currency from table T001P & Error during Initialization of payroll.
i am SAP HCM Trainee.. practicing at home.Pls check the currency in table T500C.
You can use TCode OE00 for table maintenance T500C.
Also check whether currency is there in table V_CURC and T510.
Hope this will help.
Regards
Ghouse -
Error, while pushing the data from Oracle to MSSQL.
Hi,
I am facing the below error, while pushing the data from Oracle to MSSQL.
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Transparent gateway for MSSQL][Microsoft][ODBC SQL Server Driver][SQL Server]Update or insert of view or function 'View_Name' failed because it contains a derived or constant field.[Microsoft][ODBC SQL Server Driver][SQL Server]Statement(s) could not be prepared. (SQL State: 00000; SQL Code: 8180)
Please suggest me, how to overcome from this.
Thanks.[email protected] wrote:
Hi,
I am facing the below error, while pushing the data from Oracle to MSSQL.
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Transparent gateway for MSSQL][Microsoft][ODBC SQL Server Driver][SQL Server]Update or insert of view or function 'View_Name' failed because it contains a derived or constant field.[Microsoft][ODBC SQL Server Driver][SQL Server]Statement(s) could not be prepared. (SQL State: 00000; SQL Code: 8180)
Please suggest me, how to overcome from this.
Thanks.This is an error from SQL Server being passed back to Oracle so you can see the problem.
What it is saying is that you are trying to insert (or update) data to a database view and that view contains a column that is either a constant (literal) value or is derived (a calculation, formula or string concatenation etc.).
As such, you can't insert or update data on that column because it has nowhere to go on the database table(s) that underly the view. -
Error while deleting a row from the Entity Object
Hi OAF Guys,
i am unable to delete the newly created row from the entity object.
let me explain my scenario.
1. i have a table of which some of the columns are mandatory.
2. I am writing the code in the validateEntity to check wether the user really enter anything into the fields.
3. My problem is, when the user creates row and wanted to delete the row without entering any details, the validate entity of the EO gets fired which will not allows to delete the row.
Is there any workaround for this problem.
Regards,
Nagesh Manda.Hi Tapash,
I am very sorry for not providing you the complete details of my scenario. Here i am explaining
1. what code you have placed while creating the row and in validation method on EOImpl.
while creating a new row i am initializing the primary key of the EO with the sequence value.
2.When you say, you are unable to delete the row, are you getting a error message ? if yes, custom message or fwk error ?
its not the fwk error, its the custom message which wrote in my validateEntity method of EO to check whether the user had entered all the necesary columns or not.
3.How are you trying to delete the row ?
while the user clicks on the delete switcher i am getting the primary key of the row and searching for the row in the vo and finally deleting it.
The problem arises when the user creates a row, and later doesnt want to enter the details and delete it. Here while deleting the row the validateEntity method of the EO gets fired and doesnt allow me to do so :(.
Any way appreciate your help tapash.
Regards,
Nagesh Manda.
Maybe you are looking for
-
In MB1C stock posting Error is POSTING PERIOD 006 2011 IS NOT OPEN .
-
Slightly off topic - ATI test demos
Hi, Slightly off topic question but... Many years ago a friend of mine (albeit a PC user) showed me a graphics card render demo which was a take on the Lobby Scene from The Matrix, designed to show of his (then) high powered graphics card (this was a
-
Hooking up 2 wrt54g v8 wireless routers
Hello folks. Here is my problem. My brother in law needs a wireless network upstairs and downstairs. So I went out and bought him 2 wrt54g v8 routers and connected one upstairs and tried to connect other one donstairs. No dice. He has a mac pc plugge
-
Anyone else noticed that the phone usage has not been updated on My BT since 5/7/14. I have definately made calls, and know it takes 48 hours to appear. It seems to coincide with the anytime calls add-on being visible, give or take a few days. It do
-
Hi Experts, My requirement is- I have HR ESS in place. Whenever an user places a request for leave, mail goes to SAP Inbox. I need to send a copy to external mail. I got the code somehow. Can anyone suggest Please tell me the userexit/BADI I need to