Error while deploying the EAR file

Hi,
We are trying to deploy an EAR file (created through NWDS) using the SDM. But while deploying we are getting the following exception:
com.sap.sdm.util.sduread.IllFormattedSduFileException:Error during attribute reading: received exception: Error in opening zip file
Does this has something to do with the application or is it related with the WinZip software?
We deployed the same application with the same configuration previously, at that time it got deployed without any issues.
Please reply.
Thanks & regards,
Sujit

Hi,
This is due to the corruption of EAR file, Check whether the Ear File is  correct or if it has been Corrupted. Because it is unable to Read the File. If it is Corrupted just Create a New EAR file.
Regards,
Sharma.

Similar Messages

  • Error while deploying an ear file in the Oracle Application Server

    Hi,
    There was an existing ear deployed in the the oracle application server - 10g. We had to include some customizations so we rebuild the ear file with the new changes and tried redeploying the ear using the EM console. Getting the below error while deploying the same. Any pointers to the same would be helpful.
    Error
    An error occurred when processing the data submitted. Find the appropriate field and enter the correct information as noted next to each field.
    Archive Location - Failed in uploading archive. Invalid archive file: Jar file resourceadapter-rar.rar is missing a standard deployment located at META-INF/ra.xml
    We have not modified anything in the ra.xml nor have touched the resourceadapter-rar.rar

    Hello
    did you configure the startweblogic file as mentioned in the admin guide ?

  • Error While Deploying the Ear .

    HI ,
    I am getting an error while deploying my ear through Deploy Tool . the ear get loaded but fails to deploy... the error message i got is pasted below...
    It gives error about EJBContainer, but the J2EE Engine's Visual Admin shows the service is runing
    Any help is highly appreaciated
    Eror Message.....
    06/05/13 18:49:09 -  ***********************************************************
    06/05/13 18:49:10 -  Start updating EAR file...
    06/05/13 18:49:10 -  start-up mode is lazy
    06/05/13 18:49:12 -  EAR file updated successfully for 2078ms.
    06/05/13 18:49:12 -  Start deploying ...
    06/05/13 18:49:14 -  EAR file uploaded to server for 1172ms.
    06/05/13 18:49:16 -  ERROR: Not deployed. Deploy Service returned ERROR:
                         java.rmi.RemoteException: Cannot deploy application sap.com/omnidocs_ejb..
                         Reason: Exception during generation of components of application sap.com/omnidocs_ejb in container EJBContainer.; nested exception is:
                              com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Exception during generation of components of application sap.com/omnidocs_ejb in container EJBContainer.
                              at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:554)
                              at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1555)
                              at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:304)
                              at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:193)
                              at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:122)
                              at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
                              at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
                              at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
                              at java.security.AccessController.doPrivileged(Native Method)
                              at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
                              at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
                         Caused by: com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Exception during generation of components of application sap.com/omnidocs_ejb in container EJBContainer.
                              at com.sap.engine.services.deploy.server.application.DeploymentTransaction.makeComponents(DeploymentTransaction.java:621)
                              at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.commonBegin(DeployUtilTransaction.java:319)
                              at com.sap.engine.services.deploy.server.application.DeploymentTransaction.begin(DeploymentTransaction.java:307)
                              at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:292)
                              at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:326)
                              at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:3139)
                              at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:539)
                              ... 10 more
                         Caused by: java.lang.NoClassDefFoundError: com/newgen/omni/jts/txn/NGOServerInterface
    Loader Info -
                         ClassLoader name: [Deployment:Runtime:sap.com/omnidocs_ejb]
                          Parent loader name: [Frame ClassLoader]
                          References:
                            common:service:http;service:servlet_jsp
                            service:ejb
                            common:service:iiop;service:naming;service:p4;service:ts
                            service:jmsconnector
                            library:jsse
                            library:servlet
                            common:library:IAIKSecurity;library:activation;library:mail;library:tcsecssl
                            library:ejb20
                            library:j2eeca
                            library:jms
                            library:opensql
                            common:library:com.sap.security.api.sda;library:com.sap.security.core.sda;library:security.class;library:webservices_lib;service:adminadapter;service:basicadmin;service:com.sap.security.core.ume.service;service:configuration;service:connector;service:dbpool;service:deploy;service:jmx;service:jmx_notification;service:keystore;service:security;service:userstore
                            interface:resourcecontext_api
                            interface:webservices
                            interface:cross
                            interface:ejbserialization
                          Resources:
                            C:\usr\sap\J2E\JC00\j2ee\cluster\server0\temp\deploy\1147526354539
                            C:\usr\sap\J2E\JC00\j2ee\cluster\server0\temp\deploy\1147526354539\omnidocs_ejb.jar
                          Loading model: {parent,references,local}
                         The error occurred while trying to load "com.newgen.omni.jts.txn.oracle.docdb.NGOConnectCabinet".
                              at com.sap.engine.frame.core.load.ReferencedLoader.loadClass(ReferencedLoader.java:389)
                              at com.sap.engine.services.ejb.deploy.verifier.CheckUtils.loadClass(CheckUtils.java:25)
                              at com.sap.engine.services.ejb.deploy.verifier.session.SessionBeanCheck.check(SessionBeanCheck.java:42)
                              at com.sap.engine.services.ejb.deploy.verifier.Verifier.checkBean(Verifier.java:82)
                              at com.sap.engine.services.ejb.deploy.verifier.Verifier.check(Verifier.java:46)
                              at com.sap.engine.services.ejb.deploy.DeployAdmin.generate(DeployAdmin.java:253)
                              at com.sap.engine.services.ejb.EJBAdmin.deploy(EJBAdmin.java:2144)
                              at com.sap.engine.services.deploy.server.application.DeploymentTransaction.makeComponents(DeploymentTransaction.java:606)
                              ... 16 more
                         For detailed information see the log file of the Deploy Service.
    06/05/13 18:49:16 -  ***********************************************************
    <b></b>

    Hi
    I would suggest you to do the deployment of the EAR using NWDS rather that using deploy tool. for Doing this please follow this link for creating ,building and deplopying as ear using dev studio
    http://help.sap.com/saphelp_nw04/helpdata/en/08/51ec41b9a24f4a8359c61ae4a02db1/frameset.htm
    Anyways if you ar still tied up using deploy tool pleas cross verify that all the dependent jars (including jars which  NgoServerinterface will beusing internally has to be in the classpath . Would be great if you can post the stack trace
    hope this helps !<b>  please mark points for helpful answers .</b>
    regards
    rajeshkr

  • Error while deploying the par file

    while deploying  an application in NWDS we are getting the error as"operation failed,please make sure that the server is running or check the log."
    we have ensured that the server is running,but the deployment is getting failed.
    Please suggest tips to deploy the PAR file successfully.
    Thanks.

    Hi,
    We are using NWDS to create a small application to develop ( for ex jspdynpage)
    .while deploying the par file or exporting it to the server,we are getting the error as "please make sure that the server running.HTTPS protocol is not supported,please ensure that this server is not using HTTPS.
    the server is running and is shown in green.
    we have also  disabled the proxy settings.
    we have also tried by specifiing the IP of the server in the proxy settings.
    the above steps didnt work.please suggest the things to do to make this working.
    thanks,
    rajani.

  • Error while deploying the ear fie

    When I try to deploy the EAR file from the Netweaver Studio to the CE environment getting the below error..I am using both trial versions and this is my first application trying to test. Is there any preliminary configuration we need to do.
    Please help me out in resolving the error.
    Aug 11, 2007 1:17:00 PM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
    [002]Deployment aborted
    Deployment exception : Cannot determine sdm host (is empty). Please configure your engine/sdm correctly !

    Hi,
    <b><u>Just restart the server and try deploying again</u>.</b>
    Also refer to following links.
    <b>How to configure "J2EE Engine/SDM" and Deploy new archive and run</b> - How to configure "J2EE Engine/SDM" and Deploy new archive and run
    <b>SDM Error when Deploying Web Dynpro Application</b>   - Cannot determine sdm host error
    <b>error SDM "Deployment exception : Cannot determine sdm host (is empty). "</b>  - error SDM "Deployment exception : Cannot determine sdm host (is empty). "
    <b>Error: Cannot determine sdm host (is empty).</b>  - Deploy Error: Cannot determine sdm host (is empty).
    <b>Deploy Error: Cannot determine sdm host (is empty).</b>  - Deploy Error: Cannot determine sdm host (is empty).
    I hope this will help you.
    Regards,
    Vaibhav

  • Error while deploying P6.ear file in Oracle Weblogic installing P6 R8 web

    Hi,
    I am trying to install Primavera P6 R8 web and while deploying the P6.ear file into Oracle Weblogic getting the following error:
    "<Error> <Deployer> <BEA - 149202> <Encountered an exception while attempting to commit the 7 task for the application 'pm6'.>
    weblogic.application.ModuleException: :com.primavera.PhoenixException: ERROR: BREBootstrap.xml was not found. Please make sure that the JVM system property primavera.bootstrap.home is defined and set to the location of the directory containing BREBootstrap.xml
    Thanks & Regards,
    Ashwani

    Hello
    did you configure the startweblogic file as mentioned in the admin guide ?

  • Out of Memory Error While deploying as EAR file

    Hai,
    I was trying to deploy an EAR file of size 63 MB which inturn containing about 60 EJB.jars. No WARs. application.xml has all the entries for the JARs. While I am deploying it is giving Out of Memory Error. Is there any way to tweak this problem. I am using my own hand written java application which uses the SunONE deployment APIs for deployment. Can u please tell how to tackle this problem. I am running my application through a batch file which uses jdk1.4.
    Please help me regarding this issue.

    You can set the initial heap size and maximum heap size for the JVM, either in the app-server admin console, or maybe in one of your scripts. You look-up the syntax!...
    I had this error yesterday. I too had run out of memory (150Mb). You simply need to allocate more to the app-server.

  • Error while deploying the SAR file to EM Console.... MDS-01330: Failed to l

    Hi Team,
    We configured the HUDSON Tool with BPEL Projects. When I am trying to deploy the BPEL Projects to the SOA SERVER. I am getting an error associated with MDS. We never used MDS for storing teh metaData But still we are getting an error.
    10:35:42 deploy:
    10:35:42 [input] skipping input as property serverURL has already been set.
    10:35:42 [input] skipping input as property sarLocation has already been set.
    10:35:42 [deployComposite] setting user / password ..., user = weblogic
    10:35:42 [deployComposite] Processing sar = D: \ Programs \ hudson \ jobs \ P6.1_XYZ \ workspace \ XYZ/deploy/sca_XYZ_rev1.17.jar
    10:35:42 [deployComposite] Adding sar file - D: \ Programs \ hudson \ jobs \ P6.1_XYZ \ workspace \ XYZ \ deploy \ sca_XYZ_rev1.17.jar
    10:35:42 [deployComposite] Creating HTTP connection to host: 10.246.161.147, port: 8020
    10:35:44 [deployComposite] Received HTTP response from the server, response code = 500
    10:35:44 [deployComposite] ----> response code = 500, error: Error during deployment: Error occured when creating target MDS instance.: Oracle.mds.config.MDSConfigurationException: MDS-01330: Failed to load the configuration document MDS
    10:35:44 [deployComposite] MDS-01329: Unable to load the element "persistence-config"
    10:35:44 [deployComposite] MDS-01370: The configuration for use MetadataStore store metadata \ "soa-infra-store \" is invalid.
    10:35:44 [deployComposite] MDS-00922: Unable to create snapshot of heading ConnetionManager "oracle.mds.internal.persistence.db.JNDIConnectionManagerImpl".
    10:35:44 [deployComposite] weblogic.common.resourcepool.ResourceDisabledException: Pool mds-soa is Suspended, cannot allocate resources to applications ..
    10:35:44 [deployComposite]: MDS-01330: Failed to load configuration document MDS
    10:35:44 [deployComposite] MDS-01329: Unable to load the element "persistence-config"
    10:35:44 [deployComposite] MDS-01370: The configuration for use MetadataStore store metadata \ "soa-infra-store \" is invalid.
    10:35:44 [deployComposite] MDS-00922: Unable to create snapshot of heading ConnetionManager "oracle.mds.internal.persistence.db.JNDIConnectionManagerImpl".
    10:35:44 [deployComposite] weblogic.common.resourcepool.ResourceDisabledException: Pool mds-soa is Suspended, cannot allocate resources to applications ..
    10:35:44 [deployComposite].
    10:35:44
    10:35:44 BUILD FAILED
    10:35:44 D: \ Programs \ hudson \ jobs \ P6.1_XYZ \ workspace \ XYZ \ build.xml: 44: The following error occurred while executing this line:
    10:35:44 D: \ Oracle \ 11gR1ps1 \ jdeveloper \ bin \ ant-sca-deploy.xml: 132: Error during deployment: Error occured when creating target MDS instance.: Oracle.mds.config.MDSConfigurationException: MDS-01330 : Failed to load configuration document MDS
    10:35:44 MDS-01329: Unable to load the element "persistence-config"
    10:35:44 MDS-01370: The configuration for use MetadataStore store metadata \ "soa-infra-store \" is invalid.
    10:35:44 MDS-00922: Unable to create snapshot of heading ConnetionManager "oracle.mds.internal.persistence.db.JNDIConnectionManagerImpl".
    10:35:44 weblogic.common.resourcepool.ResourceDisabledException: Pool mds-soa is Suspended, cannot allocate resources to applications ..
    10:35:44: MDS-01330: Failed to load configuration document MDS
    10:35:44 MDS-01329: Unable to load the element "persistence-config"
    10:35:44 MDS-01370: The configuration for use MetadataStore store metadata \ "soa-infra-store \" is invalid.
    10:35:44 MDS-00922: Unable to create snapshot of heading ConnetionManager "oracle.mds.internal.persistence.db.JNDIConnectionManagerImpl".
    10:35:44 weblogic.common.resourcepool.ResourceDisabledException: Pool mds-soa is Suspended, cannot allocate resources to applications ..
    This is not pertaining to a single Project and this was happening with all BPEL Process.
    Please help us since it was blocking us to either delete a SAR file from EM Console as well as Deploy the SAR file to the EM Console.
    Thanks,
    Venugopal Raja

    weblogic.common.resourcepool.ResourceDisabledException: Pool mds-soa is Suspended, cannot allocate resources to applications ..Check server logs to find out why mds-soa is suspended. Make sure that datasource mds-soa is up and running on SOA servrs before deploying an application.
    Regards,
    Anuj

  • 'weblogic.application.ModuleException:'while deploying the EAR file to WLS

    Hi
    i am trying to deploy the ADf11g app on to external WLS 10.3 server.
    My WLS is having the shared libraries .so i didn't include the liibraries in WAR.
    while deploying i am facing errors.
    My domain log:
    Nov 12, 2008 2:40:30 PM EST     J2EE     Warning     BEA-160195     The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application Dep2EARapplication1 is not versioned.
         Nov 12, 2008 2:40:30 PM EST     HTTP     Error     BEA-101371     There was a failure when processing annotations for application F:\oracleWls\user_projects\domains\sailu1base_domain\servers\AdminServer\tmp\_WL_user\Dep2EARapplication1\6e738n\Dep2webapp1.war. Please make sure that the annotations are valid. The error is org.apache.myfaces.trinidad.webapp.ResourceServlet
         Nov 12, 2008 2:40:30 PM EST     Deployer     Error     BEA-149265     Failure occurred in the execution of deployment request with ID '1226518830484' for task '4'. Error is: 'weblogic.application.ModuleException: Failed to load webapp: 'usrDep2Application1-ViewController-context-root'' weblogic.application.ModuleException: Failed to load webapp: 'usrDep2Application1-ViewController-context-root' at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:387) at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176) at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93) at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37) at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58) at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:42) at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:615) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37) at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191) at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:16) at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:155) at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60) at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:197) at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:89) at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217) at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:723) at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1190) at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:248) at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:159) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:157) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:12) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:45) at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) at weblogic.work.ExecuteThread.run(ExecuteThread.java:173) java.lang.ClassNotFoundException: org.apache.myfaces.trinidad.webapp.ResourceServlet at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:283) at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256) at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:54) at java.lang.ClassLoader.loadClass(ClassLoader.java:306) at java.lang.ClassLoader.loadClass(ClassLoader.java:251) at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:176) at weblogic.utils.classloaders.ChangeAwareClassLoader.loadClass(ChangeAwareClassLoader.java:35) at weblogic.servlet.internal.WebAnnotationProcessorImpl.processServlets(WebAnnotationProcessorImpl.java:227) at weblogic.servlet.internal.WebAnnotationProcessorImpl.processJ2eeAnnotations(WebAnnotationProcessorImpl.java:211) at weblogic.servlet.internal.WebAnnotationProcessorImpl.processAnnotations(WebAnnotationProcessorImpl.java:107) at weblogic.servlet.internal.WebAppServletContext.processAnnotations(WebAppServletContext.java:1287) at weblogic.servlet.internal.WebAppServletContext.<init>(WebAppServletContext.java:412) at weblogic.servlet.internal.WebAppServletContext.<init>(WebAppServletContext.java:456) at weblogic.servlet.internal.HttpServer.loadWebApp(HttpServer.java:414) at weblogic.servlet.internal.WebAppModule.registerWebApp(WebAppModule.java:910) at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:364) at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176) at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93) at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37) at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58) at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:42) at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:615) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37) at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191) at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:16) at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:155) at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60) at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:197) at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:89) at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217) at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:723) at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1190) at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:248) at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:159) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:157) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:12) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:45) at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
         Nov 12, 2008 2:40:30 PM EST     Deployer     Warning     BEA-149004     Failures were detected while initiating deploy task for application 'Dep2EARapplication1'.
         Nov 12, 2008 2:40:30 PM EST     Deployer     Warning     BEA-149078     Stack trace for message 149004 weblogic.application.ModuleException: Failed to load webapp: 'usrDep2Application1-ViewController-context-root' at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:387) at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176) at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93) at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37) at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58) at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:42) at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:615) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37) at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191) at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:16) at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:155) at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60) at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:197) at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:89) at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217) at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:723) at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1190) at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:248) at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:159) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:157) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:12) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:45) at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) at weblogic.work.ExecuteThread.run(ExecuteThread.java:173) java.lang.ClassNotFoundException: org.apache.myfaces.trinidad.webapp.ResourceServlet at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:283) at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256) at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:54) at java.lang.ClassLoader.loadClass(ClassLoader.java:306) at java.lang.ClassLoader.loadClass(ClassLoader.java:251) at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:176) at weblogic.utils.classloaders.ChangeAwareClassLoader.loadClass(ChangeAwareClassLoader.java:35) at weblogic.servlet.internal.WebAnnotationProcessorImpl.processServlets(WebAnnotationProcessorImpl.java:227) at weblogic.servlet.internal.WebAnnotationProcessorImpl.processJ2eeAnnotations(WebAnnotationProcessorImpl.java:211) at weblogic.servlet.internal.WebAnnotationProcessorImpl.processAnnotations(WebAnnotationProcessorImpl.java:107) at weblogic.servlet.internal.WebAppServletContext.processAnnotations(WebAppServletContext.java:1287) at weblogic.servlet.internal.WebAppServletContext.<init>(WebAppServletContext.java:412) at weblogic.servlet.internal.WebAppServletContext.<init>(WebAppServletContext.java:456) at weblogic.servlet.internal.HttpServer.loadWebApp(HttpServer.java:414) at weblogic.servlet.internal.WebAppModule.registerWebApp(WebAppModule.java:910) at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:364) at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176) at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93) at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37) at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58) at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:42) at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:615) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37) at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191) at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:16) at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:155) at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60) at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:197) at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:89) at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217) at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:723) at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1190) at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:248) at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:159) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:157) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:12) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:45) at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
         Nov 12, 2008 2:40:30 PM EST     Console     Error     BEA-240003     init>(WebAppServletContext.java:412) at weblogic.servlet.internal.WebAppServletContext.<init>(WebAppServletContext.java:456) at weblogic.servlet.internal.HttpServer.loadWebApp(HttpServer.java:414) at weblogic.servlet.internal.WebAppModule.registerWebApp(WebAppModule.java:910) at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:364)
         Nov 12, 2008 2:41:04 PM EST     netuix     Warning     BEA-423420     Redirect is executed in begin or refresh action. Redirect url is /console/console.portal?_nfpb=true&_pageLabel=DiagnosticsViewDomainLogTablePage&DiagnosticsViewDomainLogTablePortlethandle=com.bea.console.handles.LogDispatchHandle%28%22AdminServer%3BDomainLog%22%29.
    Can anyone plz tell me why i am getting errors.
    what is the 'weblogic.application.ModuleException:' error.
    and the HTTP error.

    Hi,
    My EAR file size is about 25 MB.this size is becoz of libraries.so i decided to make a jar file of all libraries.and i installed that jar as library on wls10.3. so that my ear apps later refer this jar.by this no need to include the libraries in every EAR and also size of ear is reduced.
    In my weblogic-application.xml file i refer this jar using the <library-ref> tag.when i am trying to install ear file i am facing this weblogic.application.ModuleException: error as posted above .
    Can you tell me where i went wrong.
    Is the way i am doing is right or not.

  • Problem while deploying the ear file in sap itc server

    error loading archive
    manifest attributes are missing while deploying ear file in sap itc server
    attribute key location is missing
    attribute key vendor is missing

    error loading archive
    manifest attributes are missing while deploying ear file in sap itc server
    attribute key location is missing
    attribute key vendor is missing

  • Error while deploying the JDI SCA file on the server

    Hi,
    I am not able to deploy the 3 SCA files JDIdevinf, JDI buildt and JDIdeinff.
    When deploying the following error occured.
    ABorted deployment component 'tc CBB Appl/'sap.com'/SAP AG'6.4009.00.0000.200411042045
    Caught exception during application deployment from SAP J2EE ENgine's deploy service.
    java.rmi.RemoteException: Cannot deploy application sap.com.tc.CBB Appl.. Reason: Exception during
    application sap.com/tc.CBB Appl in container EJBContainer; nested exception is
    exceptions.ServerDeploymentException: Exception during generation of components of application sap.com/tc.CBS Appl in container EJBContainer
    (message ID:com.sap.sdn.servlet.servertype.inqny.extern.EngineApplOnlineDEployerImpl.per
    REMEXC)
    Deployment of tc.CBBAppl finished with Error
    How to solve this

    Hi,
    We are using NWDS to create a small application to develop ( for ex jspdynpage)
    .while deploying the par file or exporting it to the server,we are getting the error as "please make sure that the server running.HTTPS protocol is not supported,please ensure that this server is not using HTTPS.
    the server is running and is shown in green.
    we have also  disabled the proxy settings.
    we have also tried by specifiing the IP of the server in the proxy settings.
    the above steps didnt work.please suggest the things to do to make this working.
    thanks,
    rajani.

  • Error while deploying Java EAR including flex

    I am developing Flex + Java in RAD 6.0, codes run correctly.
    But when I want to deploy the ear file of the whole application.
    Error is raised while deploying the flex folder under
    WEB-INF. Following the detailed information:
    Anyone know how to solve this error? Thank you.
    om.ibm.wtp.common.wft.util.WFTWrappedException: Error
    exporting EAR file.
    com.ibm.etools.j2ee.commonarchivecore.exception.SaveFailureException:
    WEB-INF/flex/.#remoting-config.xml.1.3
    !Stack_trace_of_nested_exce!
    org.eclipse.core.internal.resources.ResourceException:
    Resource /centrakDemo/WebContent/WEB-INF/flex does not exist.
    at
    org.eclipse.core.internal.resources.Resource.checkExists(Unknown
    Source)
    at
    org.eclipse.core.internal.resources.Resource.checkAccessible(Unknown
    Source)
    at
    org.eclipse.core.internal.resources.File.getContents(Unknown
    Source)
    at org.eclipse.core.internal.resources

    what is the actual filename of the remoting-config file?
    Is is exactly ".#remoting-config.xml.1.3"? I'm not sure the #
    is a legitimate filename character. Looks to me like you're
    intending to exclude this file and are 'commenting it out'. Try
    removing the file completely, or rename it to something that's
    legit. You should be able to find the source for
    org.eclipse.core.internal.resources.Resource.checkExists on google
    if that doesn't work, and see what it's doing.
    Tim

  • Error while deploying a PAR file from NWDS into an ECC.

    Hi all,
    I am getting this error while deploying a PAR file from NWDS into an ECC.
    Operation Failed: Please make sure the server is running or check the log (sap-plugin.log) for
    more detail.
    My server is running properly
    1 - Where is sap-plugin.log file? I don´t find it. 
    2 - Could there be another file with another name with information about the error?
    3 - Is there another way to deploy the file directly from the ECC?
    Regards,

    Hi,
    Just make sure you have maintained correct server setting to check the same open the NWDS and follow this path
    Windows/ Prefereces / SAP Enterprise Portal
    Check the following enteries
    Alias
    Host
    Port
    Login etc.
    Regards,

  • Error While Deploying the BPEL Process using obant script

    Hi All,
    I am getting the following error while deploying the BPEL Process using obant script. we are using the BPEL Version 10.1.2.0.2.Any information in this regard will be really helpful.
    Buildfile: build.xml
    main:
    [bpelc] file:/home5102/dibyap/saravana/Test/CreditRatingService.wsdl
    [bpelc] validating "/home5102/dibyap/saravana/Test/CreditRatingService.bpel" ...
    BUILD FAILED
    /home5102/dibyap/saravana/Test/build.xml:15: ORABPEL-01002
    Domain directory not found.
    The process cannot be deployed to domain "default" because the domain directory "/opt02/app/ESIT/oracle/esit10gR2iAS/BPEL10gR2/iAS/integration/orabpel/domains/default/deploy" cannot be found or cannot b
    e written to.
    Please check your -deploy option value; "default" must refer to a domain that has been installed locally on your machine.
    Total time: 23 seconds
    dibyap@ios5102_ESIBT:/home5102/dibyap/saravana/Test>
    Thanks,
    Saravana

    In 10.1.2.0.2 you need to create your own build.xml
    I have found an example, it may be of some help. This does call a property file
    cheers
    James
    <?xml version="1.0" ?>
    <!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Run cxant on this file to build, package and deploy the
    ASB_EFT BPEL process
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -->
    <project name="ASB_EFT" default="main" basedir=".">
    <!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Name of the domain the generated BPEL suitcase will be deployed to
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -->
    <property name="deploy" value="default" />
    <!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    What version number should be used to tag the generated BPEL archive?
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -->
    <property name="rev" value="1.0" />
    <!-- BPEL Best Practices Properties -->
    <!-- Defaults Properties for TARGET environments
    # CHANGE THIS FILE TO REFLECT THE TARGET ENVIRONEMNT
    # either dev, test, or prod.properties
    -->
    <property file="ebusd.properties"/>
    <property name="env" value="${env.name}"/>
    <property name="current.project.name" value="${project.name}"/>
    <property name="target.project.name" value="${project.name}_${env}"/>
    <property name="deployment.profile" value ="${env}.properties"/>
    <property name="source.development.directory" location="${basedir}"/>
    <property name="target.env.directory" location="${basedir}/deploy/${project.name}_${env}"/>
    <property file="${deployment.profile}"/>
    <property name="build.fileencoding" value="UTF-8"/>
    <!-- Prints Environment
    -->
    <target name="print.env" description="Display environment settings">
    <echo message="Base Directory: ${basedir}"/>
    <echo message="Deployment Profile: ${deployment.profile}"/>
    <echo message="target.env.directory: ${target.env.directory}"/>
    <echo message="Deploy to Domain: ${deployToDomain}"/>
    <echo/>
    <echo message="os.name: ${os.name}"/>
    <echo message="os.version: ${os.version}"/>
    <echo message="os.arch: ${os.arch}"/>
    <echo/>
    <echo message="java.home: ${java.home}"/>
    <echo message="java.vm.name: ${java.vm.name}"/>
    <echo message="java.vm.vendor: ${java.vm.vendor}"/>
    <echo message="java.vm.version: ${java.vm.version}"/>
    <echo message="java.class.path: ${java.class.path}"/>
    <echo/>
    <echo message="env: ${env}"/>
    <echo message="current.project.name: ${current.project.name}"/>
    <echo message="target.project.name: ${target.project.name}"/>
    <echo message="server.name: ${server.name}"/>
    </target>
    <!--
    Copies the current directory structure along with
    all the file into the target.env.directory and
    change the name of the project
    -->
    <target name="create.environment">
    <copy todir="${target.env.directory}">
    <fileset dir="${basedir}"/>
    <filterset begintoken="@" endtoken="@">
    <filtersfile file="${deployment.profile}"/>
    </filterset>
    </copy>
    <move file="${target.env.directory}/${current.project.name}.jpr" tofile="${target.env.directory}/${target.project.name}.jpr"/>
    </target>
    <target name="main">
    <!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    the bpelc task compiles and package BPEL processes into versioned BPEL
    archives (bpel_...jar). See the "Programming BPEL" guide for more
    information on the options of this task.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -->
    <bpelc input="${basedir}/bpel.xml" rev="${rev}" deploy="${deploy}" />
    </target>
    </project>
    here is a property file
    project.name=ASB_EFT
    env.name=ebusd
    deployToDomain=default
    server.name=[server]
    server.port=7788
    ebusd\:7788=http://[server]:7788/
    IntegrationMailAccount=OracleBPELTest
    IntegrationMailAddress=[email]
    IntegrationMailPassword=[password]
    archivedir=[directory]
    inbounddir=/[directory]
    errordir=[directory]
    outbounddir=[directory]
    bpelpw=bpel
    dbhost1=[dbserver]
    dbhost2=[dbserver]
    dbport=1523
    dbservice=bpel
    dbconnstr=jdbc:oracle:thin:@(DESCRIPTION=(LOAD_BALANCE=YES)(FAILOVER=YES)(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=[server])(PORT=1523))(ADDRESS=(PROTOCOL=tcp)(HOST=[server])(PORT=1523)))(CONNECT_DATA=(SERVICE_NAME=ebusd)))

  • Error while deploying the BPEL process

    Hi All,
    I’m getting the following error while deploying the BPEL process.
    “Error:
    [Error ORABPEL-10903]: failed to read wsdl
    [Description]: in "bpel.xml", Error loading schemas from wsdl.
    Error while loading schemas from wsdl file at location "http://ios0501e.idc.ikon.org:7720/vertex-ws/calculate-tax-wsdl.jsp?WSDL". The reason is .
    Please verify the schemas defined in wsdl.
    [Potential fix]: If your site has a proxy server, then you may need to configure your BPEL Server, designer and browser with your proxy server configuration settings (see tech note on http://otn.oracle.com/bpel for instructions).
    Kindly let me know if you have any pointers on the above.
    Thanks in Advance.
    Regards
    Sravana

    Check you proxy settings. Disable them in your deployment tool / JDeveloper

Maybe you are looking for

  • I cannot copy and paste from email to word processor in microsoft 7, not Office

    why can I not copy and paste from Yahoo email into Microsoft 7 word processor. I don't have Office. I used to do this all the time using Control C to copy and Control V to paste but recently AT&T installed Firefox and I think that's when the trouble

  • Difference between oracle business intelligence and discoverer.

    hi all. can anyone help me that what is the difference between oracle business intelligence and discoverer. any suggestion? sarah

  • Upgraded to current iMovie but don't see videos from previous version

    Hi I have an iMac 27" mid 2011, and decided to upgrade yesterday to Yosemite 10.10.  The upgrade went fine, but then discovered that iMovie would not work, so i had to run the update for iMovie which is currently 10.0.06.  I have discovered that I ca

  • Information about JSP

    Hi everyone, I am trying to collect information about JSP and was wondering if anybody could help me? I am trying to find something about the history, what kind of compiling language JSP is using and how it works, what kind of runtime and how it work

  • How to remove black borders from picture?

    http://www.homeofthenutty.com/twilight/screencaps/albums/TwilightPart2/Twilight1833.jpg Is there a Photoshop tool that can easily remove the black borders from pictures like this? Anyway to extract the image from the black background?