Error while Depreciation Run

Hi Experts,
When I am trying to run depreciation , the following error is being displayed -
Account 425485 requires an assignment to CO object, i am already assigned cost center in Asset Master Data.
Pls suggest the solution as early as possible.
Thanks in Advance,
Neeli
Points-gaming

You can try two ways:
1. in cost element master data -> CO Account Assignment, KA02->Default Account Assignment
2. in IMG Automatic CO Account Assignment, OKB9
regards,
ranjith

Similar Messages

Error while Activating / running Bex queries/reports

Hello
I have following ERRORs while activating / running BEx reports/queries.
1. While Activating BEx reports, I keel getting following ERRORS
Object directory entry R3TR ELEM E341OIR6G715GUMGN0MRXP3MA does not exist
Error when activating element BX7FOOKQB4588RROCBTC2YVZN
BEx transport request 'BIDK901352' is not available or not suitable
2. While running the BEx report/query in Bex Analyzer, I'm getting ERROR in entering the parameters, its NOT allowing / giving me option to select the parameters, for example for 0COSTCENTER, it is NOT displaying list costcenters to select before I can RUN that particular report.
3. How can I trouble shoot ERRORs related to BEx and Portal connectivity.
4. How would I setup the Variants for a Bex query/report ? Are these Variants for per user basis / per report basis. Can I have each variant for particular users OR all users must select their own variant each time when they RUN the report ?
Thanks, Sorry I have asked multiple questions, in jst one thread.
BI

Goto SE03 -->Search for Objects in Requests/Tasks option , select the object type and execute it will give all the transports it has collected before ..
Also you can use transport connection in RSA1 and select the query and find out all the objects in query locked by what request etc ..
Thanks,
Ravi

Error when Depreciation Run

Dear All,
This error message displayed when i running the Fixed Asset Depreciation Run directly until period 10, while it is ok if i running the Depr Run until period 8 and 9.
"The depreciation run 100000001 failed and has been cancelled;
Error: -10 ( - Overlapped I/O operation is in progress. )"
The error arises when i tried the depr run until period 10 onwards.
Please let me know if you have any solutions.
Thanks in advance.
Regards,
Lina Yuanita

Greetings,
Hi there, we've received the same error message before and SAP Support's reply is that this is because of the Budget setup. Below is their support message:
This problem is caused by budget deviation.
Kindly refer to the solution as follows:
1) choose Adminstration => System Initialization => General Setting
=> Budget Tab.
2) tick 'Block Deviation from Budget'
3) perform Depreciation Run in Fixed Assets
4) adjust the budget of accounts in accordance with the error message
poped up in step 3
5) perform Depreciation Run again
BTW the error message("-10(Overlapped I/O operation is in progress)")
in this scenario had been improved in B1 2007A. It will be more
user-friendly and comprehensible.
PS: Maybe we should keep the forum posts in English even if I do understand Bahasa Malaysia / Indonesia

Error while Deploying & Run Webdynpro

Hi,
Please look into this problem while deploying & Run the webdynpro,I developed a interactive form..and designed the form with Adobe Live cycle designer...
An Error Has occured failed to process the request..
Please contact your system administartaor..
when i click on show details it displays the whole stuff pasted below...
Web Dynpro client:
HTML Client
Web Dynpro client capabilities:
User agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.2; SV1; .NET CLR 1.1.4322), version: null, DOM version: null, client type: msie6, client type profile: ie6, ActiveX: enabled, Cookies: enabled, Frames: enabled, Java applets: enabled, JavaScript: enabled, Tables: enabled, VB Script: enabled
Web Dynpro runtime:
Vendor: SAP, Build ID: 6.4009.00.0000.20041104173322.0000 (release=630_REL, buildtime=2004-11-18:22:17:10[UTC], changelist=298578, host=PWDFM027)
Web Dynpro code generators of DC local/MyFormApp:
SapDictionaryGenerationCore: 6.4009.00.0000.20041026131628.0000 (release=630_REL, buildtime=2004-11-02:22:13:11[UTC], changelist=295793, host=PWDFM027.wdf.sap.corp)
SapMetamodelWebDynpro: 6.4009.00.0000.20041026132448.0000 (release=630_REL, buildtime=2004-11-02:22:17:25[UTC], changelist=295810, host=PWDFM027.wdf.sap.corp)
SapMetamodelCore: 6.4009.00.0000.20040909194107.0000 (release=630_REL, buildtime=2004-11-02:22:06:29[UTC], changelist=280398, host=PWDFM027.wdf.sap.corp)
SapWebDynproGenerationTemplates: 6.4009.00.0000.20041102105304.0000 (release=630_REL, buildtime=2004-11-02:22:38:06[UTC], changelist=297524, host=PWDFM027)
SapWebDynproGenerationCTemplates: 6.4009.00.0000.20041102105304.0000 (release=630_REL, buildtime=2004-11-02:22:38:06[UTC], changelist=297524, host=PWDFM027)
SapGenerationFrameworkCore: 6.4009.00.0000.20041026132141.0000 (release=630_REL, buildtime=2004-11-02:22:05:28[UTC], changelist=295805, host=PWDFM027.wdf.sap.corp)
SapIdeWebDynproCheckLayer: 6.4009.00.0000.20041026133106.0000 (release=630_REL, buildtime=2004-11-02:22:21:59[UTC], changelist=295820, host=PWDFM027.wdf.sap.corp)
SapMetamodelDictionary: 6.4009.00.0000.20040805191532.0000 (release=630_REL, buildtime=2004-11-02:22:10:20[UTC], changelist=270520, host=PWDFM027.wdf.sap.corp)
SapMetamodelCommon: 6.4009.00.0000.20040909194107.0000 (release=630_REL, buildtime=2004-11-02:22:06:42[UTC], changelist=280398, host=PWDFM027.wdf.sap.corp)
SapWebDynproGenerationCore: 6.4009.00.0000.20041026133106.0000 (release=630_REL, buildtime=2004-11-02:22:22:31[UTC], changelist=295820, host=PWDFM027.wdf.sap.corp)
SapDictionaryGenerationTemplates: (unknown)
Web Dynpro code generators of DC sap.com/tcwddispwda:
No information available
Web Dynpro code generators of DC sap.com/tcwdcorecomp:
No information available
J2EE Engine:
No information available
Java VM:
Java HotSpot(TM) Server VM, version: 1.4.2_06-b03, vendor: Sun Microsystems Inc.
Operating system:
Windows 2003, version: 5.2, architecture: x86
Error stacktrace:
com.sap.tc.webdynpro.pdfobject.core.PDFObjectRuntimeException: Service call exception; nested exception is:
     java.net.SocketException: Software caused connection abort: recv failed
     at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:201)
     at com.sap.tc.webdynpro.pdfobject.core.PDFObject.createPDF(PDFObject.java:142)
     at com.sap.tc.webdynpro.clientserver.adobe.AdobeFormHelper.createPDFDocumentForUIElement(AdobeFormHelper.java:398)
     at com.sap.tc.webdynpro.clientserver.uielib.adobe.impl.InteractiveForm.afterHandleActionEvent(InteractiveForm.java:104)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.afterHandleActionEvent(ClientApplication.java:1085)
     at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleActionEvent(WebDynproMainTask.java:393)
     at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:635)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59)
     at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:249)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:48)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:385)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:263)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:340)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:318)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:821)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:239)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:147)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
     at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
Caused by: java.rmi.RemoteException: Service call exception; nested exception is:
     java.net.SocketException: Software caused connection abort: recv failed
     at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:77)
     at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:87)
     at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:198)
     ... 27 more
Caused by: java.net.SocketException: Software caused connection abort: recv failed
     at java.net.SocketInputStream.socketRead0(Native Method)
     at java.net.SocketInputStream.read(SocketInputStream.java:129)
     at java.io.BufferedInputStream.fill(BufferedInputStream.java:183)
     at java.io.BufferedInputStream.read(BufferedInputStream.java:201)
     at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.readLine(HTTPSocket.java:628)
     at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.getInputStream(HTTPSocket.java:317)
     at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.getResponseCode(HTTPSocket.java:219)
     at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.HTTPTransport.getResponseCode(HTTPTransport.java:344)
     at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.handleResponseMessage(MimeHttpBinding.java:710)
     at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.call(MimeHttpBinding.java:1118)
     at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:71)
     ... 29 more
PLease look into this and ket me know setting & chnages i hav to do to work out..
Awaiting for kind response...
Thanks,
Rahaman

Hi,
please do the following check:
1. Enter the following URL in your web browser:
http://<server>:<port>/AdobeDocumentServices/Config
where <server> is the name of the J2EE engine where the Adobe document services are installed and <port> is the port of the J2EE engine.
Note that the entries in the URL are case-sensitive.
2. The web page of the web service AdobeDocumentServices is displayed. Choose Test.
3. Choose rpdata(test.) .
4. Choose the Send button without entering any parameters.
5. Enter the user name and password as given in the configuration steps(as in configuration guide- User:ADSUser) .
6. Choose Submit.
If the configuration is correct, you get the information about the Version number in the response area.
Please confirm the ADS version and WAS information.
thanks,
kris

Error in depreciation run - assets under construction

Hi!
Could someone please help me with the following:
My customer has a large amount of assets under construction (AuC) and also other assets. None of the assets under consctruction should have a depreciation key (or depreciation key 0000) and no depreciation accounts are allocated in transaction AO93 for AuC . But my customer now has incorrectly created a few AuC (that should NOT be depreciated at all) with depreciation key LINK. What happened?
1) Test run depreciation (AFAB) for all assets in period 1 during 2010. In test run no error log was created, everything looked fine.
2) Executed depreciation in background.
3) When looking at each of the assets in transaction AW01N I can see that all assets (both real assets and AuC with depreciation key) has depreciation posted in period 1. BUT, no depreciation has been posted in general ledger on any of the asset classes!
4) I have now changed the depreciation key on all AUC in AS02 to 0000 so that no depreciation will be calculated.
5) Trying to run AFAB again for period 2 but error message says that period 1 was terminated and that period 1 should be restarted.
6) Trying to run period 1 again in AFAB with restart but error message says "Account 'Acc.dep. accnt.for ordinary depreciation' could not be found for area 01" and refering to all of the incorrect AuC that I have corrected (to no depreciation key)
Please how can I go on? I want to reverse the depreciation in period 1 since I didn't get any posting i the general ledger. And then I want to make a new depreciation run only with correct assets (only depreciation on real assets, not on AuC).
Please help!
I am very thankful for any help!
Many many thanks in advance!

Hi, Can you please how the issue is solved because i have the same problem which i need to resolve immediately. Please reply me as soon as possible
with regards,
Prabhakar

Error in Depreciation run for 7 th period

Hi Guruu2019s
When we run depreciation run year 2008 for period 7 has failed with the following error :
Account 'Accumulated dep. account unpl. deprec.' could not be found.
however it has posted to few assets and not posted to few assets, when I checked in the log for posting run there is a message saying that u201Cthere are error in the posting run.after correcting, restart the run.
u201C2documetns were createdu201D
If I go to previous log for posting there is no error message and it says with green signals that 3 documents were created. From 1 to 6 periods, in every log says that 3 document were cresated
Only this particular run says 2 documents were created.
Any advise?
Thanks in advance
Regards
Sunitha,

It looks like that in period 7, you do the first "unplanned depreciation". That's explain why the error only happen in period 7.
The problem happens because GL account for "unplanned depreciation" is not created.
Try to check in t-code : AO90 => Choose your Chart of Account => Choose Account determination for asset class in which you did the unplanned depreciation => Choose Depreciation => Check all GL accounts assignment in "UNPLANNED DEPRECIATION ACCOUNT ASSIGNMENT".
Then check in t-code :FS00 whether the GL Accounts (in "UNPLANNED DEPRECIATION ACCOUNT ASSIGNMENT) are exist or not.
If the GL accounts are not exist then you should created the GL accounts first. Afterwards, try to running the AFAB again using "Restart".
Good luck.

ERROR WHILE GR : RUN TIME

Dear All,
I am getting run time error while doing GR :
Run Time Errors Message_Type_X
Date and Time :
Short dump has not been completely stores ( too big)
Please guide
Thanks
Vikas

Sorry, this is much too vague for people to give meaningful replies. Please look in SAP Support Portal first for related notes, if customer code is involved try to analyse the shortdump yourself first. If you post again, make sure you include all necessary details.
Thread locked.
Thomas

Profit Center blocked error in depreciation run

We are upgrading SAP system from 4.6 to 6.0. It was noticed that Profit Center blocked error is being captured in depreciation run test run in the upgraded version. In 4.6, this error is not being captured. Is this an enhancement in the upgraded version?

I have not search information about it. I found this change only positive. Now you have direct to solve the error (wrong profit center) and not later with the retirement. It is only when they block profit centers or assign an other profit center to a cost center that they have to contact asset accounting for changing the asset. In the old version the values on the profit center where wrong, now you have to correct them. I see this more as a bug in the old version that is solved now.
When you don't want this have a look to the error message and turn it of when that is possible, but then you accept that the vallues in profit center accounting are wrong

ParticleFilter4 parameter error while program running

    I use CVI and VDM8.6, I had installed the VDM8.6 patch package, and there is no error while program compile, but when run the program, there is error occured, the error message is as attached image showed;
    also I had another question: should I place ParticleFilter() before ParticleCount() or after ParticleCount?
Thanks in advance,
Solved!
Go to Solution.
Attachments:
Particlefilter_runerror.JPG ‏63 KB

Dear Guenter,
    Problem solved, Thank you very much!
    I made mistake on the input pointe parameter, when the pointer is used as output parameter then it no need to assign memory.
Sam Liu

Error In Depreciation Run in the period 08 the following is the error

Dear all
While executing the Deperciation run in the bacground in the period 8 system througing a error message that the Object ORD 600020 has system status CRTD (Created). According to this status, transaction 'FI: Postings' is not allowed. how do i resolve this issue.
Can any one help me out this please. to post the depreciation for the year 2006 and till date.
Rao
Edited by: venkateshwararao Kongara on Nov 15, 2008 8:18 AM

Please run the depr program under test mode with list assets checked and recreate the error. Then please send us the long text of the error message.
Would you please check how is the ORD *** linked to Asset accounts?

Error during Depreciation Run

Hello Experts
While running the depreication run through T.Code AFAB, i am being facing the folliwing error
Error when creating line items using line item schema SAP_500_001...
Message no. AA548
Diagnosis
The system found inconsistencies in the structure of the FI document line items. Line item schema SAP_500_001 does not provide reliable results in relation to posting to the general ledger.
Procedure
Check line item schema SAP_500_001 for this posting transaction. There are two possible causes for the error:
1. A value field was updated on the asset, and this value field is updated to a reconciliation account in FI (for example, an asset balance sheet account, accumulated depreciation or down payments), but there is no line item defined for this value field in the line item schema.
2. The error message can also be caused by incorrect account allocation. In order to find out if you have incorrect account allocations in the account determination for Asset Accounting, carry out a consistency check of the accounts. The consistency check is part of FI-AA Customizing.
Kindly suggest what needs to be done
Regards
Anil

locked.
First of all, search. This same error message was reported earlier.
Second, look at the error and follow the instructions. Did you run the consistency check report?
Third, search OSS. I just found 12 notes related to this error.

Error while costing run .

Hello All,
While running costing run ( plant level) in background mode, the job is getting cancelled with some error message "Required Parameters missing for MARA_SINGLE_READ".
And its not allowing the costing run. Please suggest any steps to overcome this.
Regards
Mahesh

Hi,
we are having the same problem when performing the costing run just for one process order.
Any hint?
Thanks in advance and regards,
Ramó

FR Report Throwing error while being run from workspace.

While trying to run FR from HFM workspace, its not opening up and instead following error message pops up:
5200: Error executing query: Not enough storage is available to complete this operation.
Please guide me what can be possible reason and how to proceed?
Thanks in advance,
Satish

Increase Virtual memory of the system from which you are running reports.
You can achieve the same by going to Computer -> Properties -> Advanced System Settings.
Check this page : How to increase virtual memory size in Windows 7
Hope this avoids your issue in future.
Thanks,
Santy.

Error in depreciation run

HI Gurus,
After upgrading to ECC 6.0, I am not able to run the depreciation. I get the below mentioned error
Create document number range 03 using internal number assignment
    Message no. AA776
Diagnosis
    Processing terminated because the document number range 03 for year 2007
    was set up with external number assignment.
System Response
    For periodic posting of depreciation, you have to create a document
    number range with internal number assignment, since the document numbers
    are assigned from Financial Accounting.
Procedure
    Change the number assignment for the number range 03 from external to
    internal in Customizing for Asset Accounting. See SAP Note 890976 for
    more information.
I am not able to change the number assignment from external to internal for no range 03 as the ext tick is greyed
Request your help for the same.
Note 890976 is already applied
Urgent help is required..pls help
Kiran

Hi Take the help of your functional and ABAP team to look into that issue.
Regards,
iqbal

Error in depreciation run- number assignment

HI ALL,
After upgrading to ECC 6.0, I am not able to run the depreciation. I get the below mentioned error
Create document number range 03 using internal number assignment
    Message no. AA776
Diagnosis
    Processing terminated because the document number range 03 for year 2007
    was set up with external number assignment.
System Response
    For periodic posting of depreciation, you have to create a document
    number range with internal number assignment, since the document numbers
    are assigned from Financial Accounting.
Procedure
    Change the number assignment for the number range 03 from external to
    internal in Customizing for Asset Accounting. See SAP Note 890976 for
    more information.
I am not able to change the number assignment from external to internal for no range 03 as the ext tick is greyed
Request your help for the same.
Note 890976 is already applied
help required...pls
Regards,
Kiran

Hi,
First option:
try to delete the 03 number range & create it once again.
Second Option:
go to OBA7   & Select documnet type AF & double click,
change the number range 03 to 04,
then maintain the number range in FBN1 for 04.
maintain this number range as internal ( dont tick teh external button.
Regards
Chandra

Error while Depreciation Run

Similar Messages

Maybe you are looking for